Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Effect of high-energy ball-milling on the magnetostructural properties of a Ni45Co5Mn35Sn15 alloy

  • López García, José Luis
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Rodríguez Velamazán, José Alberto
  • Unzueta, Iraultza
  • García, José Ángel
  • Plazaola, Fernando
  • La Roca, Paulo Matías
  • Pérez de Landazábal Berganzo, José Ignacio
The effect of high-energy ball-milling on the magnetostructural properties of a Ni45Co5Mn35Sn15 alloy in austenitic phase at room temperature has been analyzed by neutron and high-resolution X-ray diffraction. The ball milling promotes a mechanically-induced martensitic transformation as well as the appearance of amorphous-like non-transforming regions, following a double stage; for short milling times (below 30 min), a strong size reduction and martensite induction occur. On the opposite, for longer times, the increase of strains predominates and consequently a larger amount of non-transforming regions appears. The effect of the microstructural defects brought by milling (as dislocations) on both the enthalpy change at the martensitic transformation and the high field magnetization of the austenite has been quantitatively estimated and correlated to the internal strains. Contrary to what occurs in ternary Ni-Mn-Sn alloys, the mechanically-induced defects do not change the ferromagnetic coupling between Mn atoms, but just cause a net reduction on the magnetic moments., This work has been carried out with the financial support of the Spanish Ministerio de Economía y Competitividad (Projects number MAT2015-65165-C2-R) Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades (Projects number RTI2018-094683-B-C54 (MCIU/AEI/FEDER, UE)), Navarra Government (Project number PC017-018 AMELEC) and Basque Government Grant No. IT-1005-16. PLR has received funding from la Caixa and Caja Navarra Foundations, under agreement LCF/PR/PR13/51080004 .
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Magnetically activated 3D printable polylactic acid/polycaprolactone/magnetite composites for magnetic induction heating generation

  • Galarreta Rodríguez, Itziar
  • López Ortega, Alberto
  • Garayo Urabayen, Eneko
  • Beato López, Juan Jesús
  • La Roca, Paulo Matías
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Gómez Polo, Cristina
  • Pérez de Landazábal Berganzo, José Ignacio
Additive manufacturing technology has attracted the attention of industrial and technological sectors due to the versatility of the design and the easy manufacture of structural and functional elements based on composite materials. The embedding of magnetic nanoparticles in the polymeric matrix enables the development of an easy manufacturing process of low-cost magnetically active novel polymeric composites. In this work, we report a series of magnetic composites prepared by solution casting method combining 5 to 60 wt.% of 140 ± 50 nm commercial Fe3O4 nanoparticles, with a semi-crystalline, biocompatible, and biodegradable polymeric blend made of polylactic acid (PLA) and polycaprolactone (PCL). The composites were extruded, obtaining 1.5 ± 0.2 mm diameter continuous and flexible filaments for fused deposition modelling 3D printing. The chemical, magnetic, and calorimetric properties of the obtained filaments were investigated by differential scanning calorimetry, thermogravimetric analysis, magnetometry, and scanning electron microscopy. Furthermore, taking advantage of the magnetic character of the filaments, their capability to generate heat under the application of low-frequency alternating magnetic fields (magnetic induction heating) was analyzed. The obtained results expose the versatility of these easy manufacturing and low-cost filaments, where selecting a desired composition, the heating capacity can be properly adjusted for those applications where magnetic induction plays a key role (i.e., magnetic hyperthermia, drug release, heterogeneous catalysis, water electrolysis, gas capture, or materials synthesis)., Open Access funding provided by Universidad Pública de Navarra. This work has been carried out with the financial support of the Navarra Government (project number PC017-018 AMELEC). The Spanish Government is acknowledged for the HIPERNANO research network (RED2018-102626-T). ALO acknowledges financial support from the grants PID2021-122613OB-I00 funded by MCIN/AEI/10.13039/501100011033 and PJUPNA2020 from Universidad Pública de Navarra. P. La Roca has received funding from “la Caixa” and “Caja Navarra” Foundations, under agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Room temperature huge magnetocaloric properties in low hysteresis ordered Cu-doped Ni-Mn-In-Co alloys

  • La Roca, Paulo Matías
  • López García, Javier
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Rodríguez Velamazán, José Alberto
  • Pérez de Landazábal Berganzo, José Ignacio
The reduction of the thermal hysteresis in first order magnetostructural transition is a determining factor to decrease energy losses and to improve the efficiency of magnetocaloric cooling based systems. In this work, a Cu doped NiMnInCo metamagnetic shape memory alloy (MMSMA) exhibiting a narrow thermal hysteresis (around 5 K) at room temperature has been designed. In this alloy, the induced L21 ordering process affects the phase stability in an unusual way compared to that observed in NiMnInCo and other NiMn based alloys. This ordering produces an increase in the Curie temperature of the austenite but hardly affects the mar tensitic transformation temperatures. As a consequence, the ordering increases the magnetization of the austenite without changing the transformation temperatures, doubles the sensitivity of the transformation to magnetic fields (the Claussius-Clapeyron slope goes from 2.1 to 3.9 K/T), improves the magnetocaloric effect, the reversibility and finally, enhances the refrigeration capacity. In addition, the magnetic hysteresis losses are among the lowest reported in the literature and the effective cooling capacity coefficient RCeff reaches 86 J/Kg for 2 T (15 % higher than those found in Ni-Mn based alloys) and 314 J/Kg for 6 T fields. Therefore, the ordered alloy possesses an excellent combination of low thermal hysteresis and high RCeff, not achieved previously in metamagnetic shape memory alloys near room temperature., This work has been carried out with the financial support of the Spanish “Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades” (Projects number RTI2018–094683-B-C54 (MCIU/AEI/FEDER, UE)), Navarra Government (Project number PC017–018 AMELEC). P. La Roca has received funding from “la Caixa” and "Caja Navarra" Foundations, under agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Non-linear GMI decoding in 3D printed magnetic encoded systems

  • Beato López, Juan Jesús
  • Algueta-Miguel, Jose M.
  • Galarreta Rodríguez, Itziar
  • Garayo Urabayen, Eneko
  • López Ortega, Alberto
  • Gómez Polo, Cristina
  • Pérez de Landazábal Berganzo, José Ignacio
The nonlinear giant magnetoimpedance (GMI) effect was explored as a highly sensitive sensing technology in 3D-printed magnetic encoded systems. Magnetic nanoparticles with low (magnetite, Fe3O4) and high (Co ferrite, Co0.7Fe2.3O4) magnetic remanence were embedded (10 wt%) in a polymeric matrix of Polylactic Acid (PLA) and Poly-ε-caprolactone (PCL) and extruded in magnetic filaments to be 3D printed by the Fused Deposition Modelling technique (FDM). Two different geometries were constructed namely, individual magnetic strips and fixed barcoded pieces. The stray magnetic fields generated by the magnetic nanoparticles were detected through the non-linear (second harmonic) GMI voltage using a soft magnetic CoFeSiB wire as the nucleus sensor. The decoding response was analyzed as a function of the magnetization remanence of the nanoparticles, the distance between the individual magnetic strips, and the position (height) of the GMI decoding sensor. It has been shown that modification of the net magnetization direction of each individual fixed strip within the barcode geometry is possible through the application of local external magnetic fields. This possibility improves the versatility of the 3D binary encoding system by adding an additional state (0 without nanoparticles, 1 or −1 depending on the relative orientation of the net magnetization along the strips) during the codifying procedure., This work has been funded by the Gobierno de Navarra - Departamento de Desarrollo Económico within the framework of the Project: “Advanced Manufacturing of Electronics, AMELEC”. It has also been partially funded by the Spanish Government - Ministerio Ciencia - Innovación (PID2019-107258RB-C32 of MCIN/AEI/10.13039/501100011033) and from the grant PID2021–122613OB-I00 funded by MCIN/AEI/ 10.13039/501100011033. Open access funding is provided by Universidad Pública de Navarra.