Pasar al contenido principal

MATERIALES MARTENSITICOS MULTIFUNCIONALES DE NUEVA GENERACION PARA APLICACIONES EN ENERGIA Y ACTUACION (MULTIMART)

RTI2018-094683-B-C54

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Effect of high-energy ball-milling on the magnetostructural properties of a Ni45Co5Mn35Sn15 alloy

  • López García, José Luis
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Rodríguez Velamazán, José Alberto
  • Unzueta, Iraultza
  • García, José Ángel
  • Plazaola, Fernando
  • La Roca, Paulo Matías
  • Pérez de Landazábal Berganzo, José Ignacio
The effect of high-energy ball-milling on the magnetostructural properties of a Ni45Co5Mn35Sn15 alloy in austenitic phase at room temperature has been analyzed by neutron and high-resolution X-ray diffraction. The ball milling promotes a mechanically-induced martensitic transformation as well as the appearance of amorphous-like non-transforming regions, following a double stage; for short milling times (below 30 min), a strong size reduction and martensite induction occur. On the opposite, for longer times, the increase of strains predominates and consequently a larger amount of non-transforming regions appears. The effect of the microstructural defects brought by milling (as dislocations) on both the enthalpy change at the martensitic transformation and the high field magnetization of the austenite has been quantitatively estimated and correlated to the internal strains. Contrary to what occurs in ternary Ni-Mn-Sn alloys, the mechanically-induced defects do not change the ferromagnetic coupling between Mn atoms, but just cause a net reduction on the magnetic moments., This work has been carried out with the financial support of the Spanish Ministerio de Economía y Competitividad (Projects number MAT2015-65165-C2-R) Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades (Projects number RTI2018-094683-B-C54 (MCIU/AEI/FEDER, UE)), Navarra Government (Project number PC017-018 AMELEC) and Basque Government Grant No. IT-1005-16. PLR has received funding from la Caixa and Caja Navarra Foundations, under agreement LCF/PR/PR13/51080004 .
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Martensitic transformation controlled by electromagnetic field: from experimental evidence to wireless actuator applications

  • Garayo Urabayen, Eneko
  • La Roca, Paulo Matías
  • Gómez Polo, Cristina
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Pérez de Landazábal Berganzo, José Ignacio
Mechanical actuators based on shape memory alloys (SMA) are becoming a key component in the development of novel soft robotic applications and surgically implantable devices. Their working principle relies in the temperature induced martensitic transformation (MT), which is responsible of the actuation mechanism. In this work, we found experimental evidence to show that the martensitic transformation can be controlled by electromagnetic field (EF) by a wireless process in ferromagnetic shape memory alloys. It is shown that the martensitic transformation can be driven by an external EF (frequency 45 kHz) while the specific absorption rate (SAR), which was determined through real-time dynamic magnetization measurements, allows the instantaneous monitoring of the transformation evolution. On the basis of the obtained results, we propose a strategy to achieve a battery-free wireless SMA actuator that can be remotely controlled. This concept can be applicable to other SMA material that exhibit a similar magneto-structural phase transition, This work has been carried out with the financial support of the Spanish ‘‘Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades” (Projects number RTI2018-094683-B-C54 (MCIU/AEI/FEDER, EU)), Navarra Government (Project number PC017-018 AMELEC). P. La Roca has received funding from ‘‘la Caixa” and ‘‘Caja Navarra” Foundations, under agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Analysis of the strain misfit between matrix and inclusions in a magnetically tunable composite

  • Bonifacich, Federico Guillermo
  • Lambri, Osvaldo Agustín
  • Lambri, Fernando Daniel
  • Bozzano, P. B.
  • Recarte Callado, Vicente
  • Sánchez-Alarcos Gómez, Vicente
  • Pérez de Landazábal Berganzo, José Ignacio
A magnetically tunable composite has been elaborated by embedding microparticles of a metamagnetic shape memory alloy on a photo curable resin. The strain misfit between the polymeric matrix and the inclusions has been analysed within Eshelby formalism. Results show the non-appearance of active microcracks at the interfaces where strains are induced by the martensitic transformation in the microparticles. Even though the martensitic transformation is well detected, the values of misfit β coefficient indicate that the matrix accommodates all the stresses induced by the inclusions. A stable surface interaction between particles and matrix is also confirmed during thermal cycles. It is also demonstrated that the damping capacity of the composites can be tuned by combining oscillating strain, fillers content and magnetic field. The proposed model could be applied to analyse the mechanical stability in polymer matrix composites in which fillers undergo a first order transition with volume change and associated deformation., This work has been partially supported by PID-UNR ING 575 and ING 612 (2018-2021), Agencia de Investigación de la Provincia de Santa Fe (Cod IO-2017-00138, Res. 177/18), Project RTI2018-094683-B-C54 (MCIU/AEI/FEDER,UE), Project PC017-018 AMELEC (Navarra Government) and the Cooperation Agreement between the Universidad Nacional de Rosario and the Universidad Pública de Navarra, Res. C.S. 3247/2015.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Room temperature huge magnetocaloric properties in low hysteresis ordered Cu-doped Ni-Mn-In-Co alloys

  • La Roca, Paulo Matías
  • López García, Javier
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Rodríguez Velamazán, José Alberto
  • Pérez de Landazábal Berganzo, José Ignacio
The reduction of the thermal hysteresis in first order magnetostructural transition is a determining factor to decrease energy losses and to improve the efficiency of magnetocaloric cooling based systems. In this work, a Cu doped NiMnInCo metamagnetic shape memory alloy (MMSMA) exhibiting a narrow thermal hysteresis (around 5 K) at room temperature has been designed. In this alloy, the induced L21 ordering process affects the phase stability in an unusual way compared to that observed in NiMnInCo and other NiMn based alloys. This ordering produces an increase in the Curie temperature of the austenite but hardly affects the mar tensitic transformation temperatures. As a consequence, the ordering increases the magnetization of the austenite without changing the transformation temperatures, doubles the sensitivity of the transformation to magnetic fields (the Claussius-Clapeyron slope goes from 2.1 to 3.9 K/T), improves the magnetocaloric effect, the reversibility and finally, enhances the refrigeration capacity. In addition, the magnetic hysteresis losses are among the lowest reported in the literature and the effective cooling capacity coefficient RCeff reaches 86 J/Kg for 2 T (15 % higher than those found in Ni-Mn based alloys) and 314 J/Kg for 6 T fields. Therefore, the ordered alloy possesses an excellent combination of low thermal hysteresis and high RCeff, not achieved previously in metamagnetic shape memory alloys near room temperature., This work has been carried out with the financial support of the Spanish “Agencia Estatal de Investigación (AEI), Ministerio de Ciencia, Innovación y Universidades” (Projects number RTI2018–094683-B-C54 (MCIU/AEI/FEDER, UE)), Navarra Government (Project number PC017–018 AMELEC). P. La Roca has received funding from “la Caixa” and "Caja Navarra" Foundations, under agreement LCF/PR/PR13/51080004.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Magnetically tunable damping in composites for 4D printing

  • Bonifacich, Federico Guillermo
  • Lambri, Osvaldo Agustín
  • Recarte Callado, Vicente
  • Sánchez-Alarcos Gómez, Vicente
  • Pérez de Landazábal Berganzo, José Ignacio
Composite materials are being used in the design of new devices to produce more functional, cheap and on-demand products. In particular, 3D printing technology based on composites opens a huge field enabling the freedom of design and the ability to manufacture complex structures. In this context, the analysis of the functional properties of printable composites is of great importance. The work is focused on the analysis of the mechanical damping of a composite made with different concentrations of a Ni45Mn36.7In13.3Co5 metamagnetic shape memory alloy into an UV-curing polymer. The composites provide a bulk material containing very brittle metallic μ-particles that can be handled for technological applications. Damping and dynamic modulus of the composites were modified with small magnetic fields below 100 kA/m, proving that the damping capacity can be tuned by applying an external magnetic field. From the measurements, it has been also possible to determine the intrinsic damping and moduli of the alloy particles, which show the characteristic properties linked to the MT. These preliminary results allow proposing this composite material as a potential functional material to be used in the design of printable devices for magneto-mechanical damping applications., This work has been partially supported by PID-UNR ING 575 and ING 612 (2018–2021), Agencia de Investigación de la Provincia de Santa Fe (Cod. IO-2017-00138, Res. 177/18), the Project RTI2018-094683-B-C54 (MCIU/AEI/FEDER, UE) and the Cooperation Agreement between the Universidad Pública de Navarra and the Universidad Nacional de Rosario, Res. C.S. 3247/2015.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Correlation between particle size and magnetic properties in soft-milled Ni45Co5Mn34In16 powders

  • Khanna, Deepali
  • Sánchez-Alarcos Gómez, Vicente
  • Recarte Callado, Vicente
  • Pérez de Landazábal Berganzo, José Ignacio
The effect of microstructural defects induced by mechanical milling has been studied in a Ni–Mn–In–Co metamagnetic shape memory alloy. The martensitic transformation and Curie temperatures do not change with grinding, thus pointing out to a null variation of long range atomic order as a consequence of the deformation. Nevertheless, the enthalpy change of the martensitic transformation highly decreases. This, and the large thermal stabilization of the martensite (with shifts on the temperature of the first reverse martensitic transformation up to 60 K), indicate the presence of a huge amount of internal stresses and microstructural defects in the obtained micro-particles. The presence of such defects considerably affects the saturation magnetization in austenite whereas almost no effect is observed in martensite. The magnetocaloric effect has been evaluated in samples with three different particle sizes. In spite of the MCE value is lower than in the bulk, the broader temperature range for the martensitic transformation in the powders makes the relative cooling power be comparable to that in the bulk. The as-milled micro-particles can be then considered as good preliminary candidates for magnetic refrigeration applications at the microscale., D. L. R. Khanna wants to acknowledge UPNA and InaMat for the Ph.D. Grant (Ayudas para contratos pre-doctorales adscritas a grupos e institutos de investigación UPNA). This work has been carried out with the financial support of the Spanish Ministerio de Ciencia, Innovación y Universidades (Project number RTI2018-094683-B-C 54,MCIU/AEI/FEDER, UE), Spain and the Navarra Government (project number PC017-018 AMELEC).