Pasar al contenido principal

MATERIALES NANOESTRUCTURADOS INNOVADORES Y TEJIDOS INTELIGENTES PARA ELECTRODOS DE BATERIAS Y SUPERCONDENSADORES DE NUEVA GENERACION

PCI2020-112039

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 25
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbon/silica hybrid aerogels with controlled porosity by a quick one-pot synthesis

  • Flores-López, Samantha L.
  • Montes Morán, Miguel Ángel
  • Arenillas de la Puente, Ana
Hybrid aerogels from carbon and silica precursors were obtained via a rapid process by microwave heating and the use of catalysts. Due to the varied nature of the precursors, one of the key points in synthesizing these hybrid aerogels is to ensure a homogeneous mixture during the entire synthesis process. It is well known that using microwaves may accelerate some reactions, but our study also evaluated the so-called microwave effect on certain reactions. Another strategy to boost polymerization reactions is the addition of a specific catalyst. The addition of a small amount of aminosilanes to the precursor solution was also evaluated with excellent results. The combination of the two different strategies (i.e., microwave heating and addition of aminosilanes) makes it possible to obtain hybrid aerogels via a rapid process and also to define the final porous properties via the usual synthesis variables (e.g., dilution ratio) in sol-gel synthesis., Authors thanks the financial support received from the Ministerio de Ciencia e Innovación from Spain PCI-2020-112039 (AEI/10.13039/501100011033) and Principado de Asturias–FICYT-FEDER(IDI/2018/000118). SFL is grateful for her research training grant received from the Administración del Principado de Asturias through the “Severo Ochoa” program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Reaction mechanism and optimization of the process variables in the microwawe-induced synthesis of nanostructured transition metal aerogels

  • González Lavín, Judith
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
Resumen del trabajo presentado a la XXXVIII Reunión Bienal de la Real Sociedad Española de Química, celebrada en el Palacio de Congresos de Granada, del 27 de junio al 30 de junio de 2022., This research was possible thanks to the grant PCI2020-112039 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid rf-si xerogels: A cost-effective proposal for insulator materials

  • Flores-López, Samantha L.
  • Fernández Villanueva, Sara
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
This article belongs to the Topic Nanomaterials for Sustainable Energy Applications., Hybrid xerogels RF/Si were synthesized by controlling the chemical variables involved in the polymerization process (i.e., molar ratios, dilution ratio, catalysts, etc.) and evaluated as insulator materials. Higher insulating performances were recorded for these hybrids compared with their counterparts made from only one of their components (i.e., RF or Si xerogels with similar porous characteristics). The analysis of chemical and structural features correlated with heat transfer methods was useful in understanding the sum of contributions involved in the thermal conductivity of RF/Si xerogels. Variables such as roughness and tortuosity can be used to improve the performance of xerogels from a different perspective. In this way, thermal conductivities of 25 mW/mK were achieved without lengthy process steps or special drying methods. Knowledge of material design and the use of microwave heating during the synthesis allowed us to approach a simple and cost-effective process. These results suggest that the hybrid materials developed in this work are a good starting point for the future of the massive production of insulation materials., This research was possible thanks to the grant PID2020-113001RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; Grant PCI2020-112039 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; MICIN IJC2019-040875-I; Administración del Principado de Asturias “Severo Ochoa” program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile Synthesis of Unsupported Pd Aerogel for High Performance Formic Acid Microfluidic Fuel Cell

  • Martínez-Lázaro, Alejandra
  • Ramírez Montoya, Luis Adrián
  • Ledesma-García, Janet
  • Montes Morán, Miguel Ángel
  • Gurrola, Mayra P
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Arriaga, Luis G
In this work, unsupported Pd aerogel catalysts were synthesized for the very first time by using microwaves as a heating source followed by a lyophilization drying process and used towards formic acid electro-oxidation in a microfluidic fuel cell. Aerogels were also made by heating in a conventional oven to evaluate the microwave effect during the synthesis process of the unsupported Pd aerogels. The performance of the catalysts obtained by means of microwave heating favored the formic acid electro-oxidation with H2SO4 as the electrolyte. The aerogels' performance as anodic catalysts was carried out in a microfluidic fuel cell, giving power densities of up to 14 mW cm-2 when using mass loads of only 0.1 mg on a 0.019 cm2 electrode surface. The power densities of the aerogels obtained by microwave heating gave a performance superior to the resultant aerogel prepared using conventional heating and even better than a commercial Pd/C catalyst., Mexican Council for Science and Technology (CONACYT) through project Ciencia de Frontera Grant no. 845132 and estancia Sabatica Conacyt 2021-2. Grant PID2020-113001RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; Grant PCI2020-112039 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Designing nanostructud materials by sol-gel synthesis

  • Arenillas de la Puente, Ana
This work was financially supported by the Spanish Ministerio de Ciencia e Innovación and the European Union through the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimizing the insulation performance of hybrid materials through their chemical and structural properties

  • Flores-López, Samantha L.
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
Authors thanks proyects PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 funded by Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR. NRR and SLF are greatful for their postdorctoral and predoctoral grants funded by Ministerio de Ciencia e Innovación de España (IJC2019-040875-I) and Principality of Asturias (Severo Ochoa Program) respectively
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The effect of surface área on the electrochemical performance of carbon aerogels as anodes for sodium dual-ion batteries

  • Flores-López, Samantha L.
  • Lobato Ortega, Belén
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
  • Rey Raap, Natalia
This work was financially supported by the Spanish Ministerio de Ciencia e Innovación and the European Union through the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033, respectively. SFL is grateful for her predoctoral grant received from the Administración del Principado de Asturias through the “Severo Ochoa” program, and NRR gratefully acknowledges the Ministerio de Ciencia e Innovación for her postdoctoral grant IJC2019-040875-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Aerogeles de grafeno como materiales para extracción en fase sólida

  • Flores-López, Samantha L.
  • Santos Gómez, Lucía dos
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
Los autores agradecen la financiación recibida por parte del Ministerio de Ciencia e Innovación de España y de la Unión Europea NextGeneration EU/PRTR (PCI2020-112039 MCIN/AEI- 10.13039/501100011033, PID2020-115334GB-I00 MCIN/AEI-10.13039/501100011033 y PID2020- 113001RB-I00 MCIN/AEI-10.13039/501100011033), así como la ayuda del Principado de Asturias (AYUD/2021/50921, IDI/2021/000015 y Programa Severo Ochoa de SLF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Sintesis de SiC y cSi a partir de geles híbridos para su aplicación en electroquímica

  • Flores-López, Samantha L.
  • Fernández Villanueva, Sara
  • Santos Gómez, Lucía dos
  • Rey Raap, Natalia
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
Los autores agradecen la financiación por parte del Ministerio de Ciencia e Innovación de España, en conjunto con la Unión Europea NextGeneration EU/PRTR (PCI2020-112039 MCIN/AEI-10.13039/501100011033 y PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033), así como por la beca postdoctoral de NRR y LdSG (IJC2019-040875-I, IJC2020-044746-I). Además de la financiación recibida del Principado de Asturias (AYUD/2021/50921 y Programa Severo Ochoa de SLF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduced graphene oxide aerogels cartridges for solid phase extraction of benzotriazoles

  • Flores-López, Samantha L.
  • Arenillas de la Puente, Ana
  • Mikšík, Ivan
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
UV-benzotriazoles have been identified as water micropollutants that cause serious problems for human health and the environment. Their low concentration in water bodies complicates their detection by direct water analysis, slowing the corrective actions to avoid bioaccumulation. In this regard, the use of graphene-based materials with a high affinity for non-polar molecules has been demonstrated to be a potential tool for the optimal separation and concentration of this type of molecules in solid phase extraction (SPE) processes. This work evaluates the potential of novel reduced graphene oxide aerogels (rGO) as extractants of mixtures of three UV-benzotriazoles in water at low concentrations. These rGO aerogels incorporate graphenic domains into a tough structure of polymeric chains by adding graphene oxide during the synthesis of resorcinol-formaldehyde gels. Aerogels with a different content and ordering of graphenic domains were obtained and characterized using Raman, XRD, SEM and nitrogen adsorption isotherms (−196 °C). The rGO aerogels that performed better as solid phase extractants were those containing 60% rGO. Aerogels with lower rGO contents (40%) required a high-temperature (2000 °C) treatment to render competitive results. The SPE methodology using selected rGO aerogels was optimized by varying the elution solvent, elution time and volume. The best performances, i.e., recoveries of 80–100% and enrichment factors of 12.5–50, were accomplished when using 0.8 mL of tetrahydrofuran (THF) as an elution solvent. As a result, a fast (10 min) and simple extraction method of UV-benzotriazoles in water was attained, achieving a detection limit of 1 ng mL−1. Selected aerogels were finally tested for the SPE of spiked samples of river waters, showing a similar performance to that observed with synthetic mixtures., This research was funded by Consejo Superior de Investigaciones Científicas (CSIC), grant number I-LINK1200; Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR, grant numbers PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-115334GB-I00 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033; Principado de Asturias (FICYT)–European Union (FEDER), grant number PCTI-Asturias IDI/2021/000015; and Czech Science Foundation, grant number 20-03899S. S.L.F.-L. acknowledges her predoctoral grant from the Severo Ochoa Program, awarded by Principado de Asturias. J.A.M. and M.A.M.-M. are members of the CSIC Interdisciplinary Thematic Platform (PTI+) for Sustainable Plastics towards a Circular Economy (PTI-SusPlast+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Estudio electroquímico de aerogeles nanoestructurados basados en metales de transición

  • González Lavín, Judith
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación y la Unión Europea a través de los proyectos PCI2020-112039 MCIN/AEI-10.13039/501100011033 y PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033, respectivamente. NRR agradece al Ministerio de Ciencia e Innovación la financiación de su beca posdoctoral IJC2019-040875-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Customized Carbon Aerogels as positive electrode materials in Li-ion capacitors

  • Canal Rodríguez, María
  • Arnaiz, M.
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
  • Ajuria, J.
This research was possible thanks to the grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. NRR also thanks to MICIN IJC2019-040875-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Doped Carbon Xerogels As Electrodes In Solid-State Asymmetric Supercapacitors

  • Rey Raap, Natalia
  • Flores-López, Samantha L.
  • Santos-Gómez, Lucía dos
  • Thomas, Minju
  • Lufrano, Francesco
  • Arenillas de la Puente, Ana
This research was possible thanks to the grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/ 10.13039/50110001103 and by the European Union NextGenerationEU/PRTR. NRR and SLFL also thanks to MICIN IJC2019-040875-I, and Principado de Asturias “Severo Ochoa” program, respectively. Besides, authors acknowledge the financial support from the INNENERMAT project. This project has received funding from EU Network M-ERA.NET (European Research Area Network for Materials Research and Innovation) Consortium, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Graphene-doped Carbon Xerogels as Anode Materials in Sodium-ion Batteries

  • Rey Raap, Natalia
  • Flores-López, Samantha L.
  • Lobato Ortega, Belén
  • Santos-Gómez, Lucía dos
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
This work was financially supported by the Spanish Ministerio de Ciencia e Innovación and the European Union through the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033, respectively. SFL is grateful for her predoctoral grant received from the Administración del Principado de Asturias through the “Severo Ochoa” program, and NRR and LdSG gratefully acknowledge the Ministerio de Ciencia e Innovación for her postdoctoral grant IJC2019-040875-I and IJC2020- 044746-I, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Novel Ordered Carbon Materials for the Analysis of Aromatic Compounds

  • Flores-López, Samantha L.
  • Santos-Gómez, Lucía dos
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
This work was financed by Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR (PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-115334GB-I00 MCIN/AEI- 10.13039/501100011033 y PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033). LdSG and SLF gratefully acknowledges to Ministerio de Ciencia e Innovación de España and Principality of Asturias for their post and predoctoral grants (IJC2020-044746-I and Severo Ochoa Program), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Performance of C/cSi Hybrids and Composites as Anode Material in Li-ion Batteries

  • Flores-López, Samantha L.
  • Fernández Villanueva, Sara
  • Lobato Ortega, Belén
  • Santos-Gómez, Lucía dos
  • Rey Raap, Natalia
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
Authors thanks the financial support received from Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR with the projects PCI2020-112039 MCIN/AEI- 10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033. NRR and LdSG are grateful for their postdoctoral grants funded by Ministerio de Ciencia e Innovación de España (IJC2019- 040875-I and IJC2020-044746-I). SLF gratefully acknowledges to Principality of Asturias for their pre-doctoral grant through Severo Ochoa Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Crystalline silicon gels as anode material for lithium-ion batteries

  • Flores-López, Samantha L.
  • Santos-Gómez, L.
  • Rey Raap, Natalia
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
  • García-Granda, Santiago
thanks to the grants PID2020-113001RB-100, PID2020-113558RB-C41, and PCI2020-112039 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; and the grants from Principado de Asturias IDI/2021/50921 and IDI/2021/50997. NRR y LdSG gratefully acknowledge to the MICIN for their postdoctoral grants (IJC2019-040875-I and IJC2020-044746-I, respectively); SFL thanks to the Principado de Asturias for the grant received through Severo Ochoa program, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave-Assisted Synthesis of Iron-Based Aerogels with Tailored Textural and Morphological Properties

  • González Lavín, Judith
  • Arenillas de la Puente, Ana
  • Rey Raap, Natalia
Iron aerogels have been synthesized by microwave heating for the first time. Therefore, it is essential to optimize this synthesis process to evaluate the possibility of obtaining nanometric materials with tailored properties and fitting them to the needs of different applications. Herein, the effect of the ratio between reagents and the time of synthesis on the final textural, morphological, and structural properties has been evaluated. The micro-meso-macroporosity of the samples can be tailored by modifying the ratio between reagents, whereas the time of synthesis has only a slight effect on the microporosity. Both the proportion between reagents and the time of synthesis are essential to controlling the nanometric morphology, making it possible to obtain either cluster- or flake-type structures. Regarding the chemical and structural composition, the samples are mainly composed of iron(II) and iron(III) oxides. However, the percentage of iron(II) can be modulated by changing the ratio between reagents, which implies that it is possible to obtain materials from highly magnetic materials to materials without magnetic properties. This control over the properties of iron aerogels opens a new line of opportunities for the use of this type of material in several fields of applications such as electrochemistry, electrocatalysis, and electrical and electronic engineering., This work was funded by Ministerio de Ciencia e Innovación through the projects PCI2020-112039 (MCIN/AEI-10.13039/501100011033) and PID2020-113001RB-100 (MCIN/AEI/10.13039/501100011033) by the European Union NextGenerationEU/PRTR and by the Principado de Asturias (GRUPIN2021 IDI/2021/50921). N.R.-R. is grateful to the Horizon-MSCA-2021-PF-01-01 call for the financial support through the Metgel project 101059852., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene Doped Carbon-Gels and MnO<inf>2</inf> for Next Generation of Solid-State Asymmetric Supercapacitors

  • Rey Raap, Natalia
  • Flores López, Samantha Lizette
  • Santos-Gómez, Lucía dos
  • Brigandì, Antonino
  • Thomas, Minju
  • Stoyanova, Antonia E.
  • Lufrano, Francesco
  • Arenillas de la Puente, Ana
Supercapacitors are playing a very relevant role in many applications due to their capability to supply high power density and long durability. However, there is a growing demand to increase their energy density, in gravimetric and volumetric basis. There are different strategies to increase supercapacitor performance by improving the active materials used in the electrodes, the type of electrolyte used or even the configuration employed in the cell. In this work, a combination of these strategies is presented with the use of different active materials, electrolytes, and symmetric vs. asymmetric configuration. The supercapacitor with asymmetric configuration using the graphene-doped carbon xerogel in the negative electrode and the manganese oxide in the positive electrode, along with the use of Na+-form Aquivion electrolyte membrane as solid electrolyte, seems to be a promising combination to obtain a substantial enhancement of both gravimetric and volumetric capacitance. Furthermore, the device presents great stability in a wide operational voltage window from 0 to 1.8 V and with a neutral pH polymer electrolyte which contributes to improve the performance, safety, and long cycle life of the device., This research was possible thanks to the grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. Authors also acknowledge the financial support from EU Network M-ERA.NET through INNENERMAT project, and the financial support of the Ministry of Education and Science of the Republic of Bulgaria under the National Program “European Scientific Networks” (Agreement D01-286/07. 10. 2020). NRR and SLFL also thank to MSCA and Principado de Asturias “Severo Ochoa” program, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel and high electrocatalytic activity aerogel Pd-TM (TM=Co, Ni, Fe)

  • Martínez-Lázaro, A.
  • Rodriguez-Barajas, M.H.
  • Rey Raap, Natalia
  • Espinosa, F. I.
  • Álvarez-Contreras, L.
  • Ledesma-García, J.
  • Arenillas de la Puente, Ana
  • Arriaga, L. G.
In the present research work, unsupported Pd-TM aerogel catalysts are prepared by an ultrafast synthesis by means of a combination of microwave heating and lyophilization. These novel aerogels are synthesized to explore the effect of transition metals on a Pd aerogel matrix in order to reduce the dependence on noble metals and increase its electrocatalytic properties for different electrochemical reactions. Physicochemical characterization of Pd-TM aerogels reveals a successful combination of high specific surface area, electrochemical surface area, and specific oxidation states. The combination of these properties in Pd-TM aerogels enhances the electrocatalytic activity towards ethanol electrooxidation compared to bare Pd aerogels. Among all the Pd-TM, PdNi aerogel presents the highest current per unit mass with 117 mA/mg, being a clear improvement compared to the Pd aerogel (48 mA/mg)., Authors thank to Consejo Nacional de Ciencia y Tecnología CONACYT (Mexico) for funding through the Ciencia de Frontera 2020–845132, 2019-39569 and LN-321116. Also to Ministerio de Ciencia e Innovacion (Spain), the European Union Next Generation EU/PRTR and Science, Technology and Innovation Plan 2018-2022 of the Principado de Asturias with the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 and IDI/2021/50921. N.R.-R is grateful to the Horizon-MSCA-2021-PF-01-01 call for financial support through the Metgel project 101059852, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of Crystalline Si and SiC Species in the Performance of Reduced Hybrid C/Si Gels as Anodes for Lithium-Ion Batteries

  • Flores López, Samantha Lizette
  • Lobato Ortega, Belén
  • Rey Raap, Natalia
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
In recent years, the research on lithium-ion batteries (LIBs) to improve their lifetime, efficiency and energy density has led to the use of silicon-based materials as a promising anode alternative to graphite. Specifically, crystalline silicon (cSi) and silicon carbide (SiC) obtained from deposition or reduction processes (e.g., magnesiothermal reduction) stand out for their electrochemical properties. However, the synthesis routes proposed until now have limitations that make them difficult to afford or operate on a large scale. For this reason, in this work, carbon-silicon (C-Si) hybrid materials synthesized through an efficient route are evaluated as the potential precursor for the obtention of both cSi and SiC species in a single material. The feasibility and influence of the magnesiothermal reduction process were evaluated, and materials with 10 wt.% of reduced Si and 10-26 wt.% of SiC were obtained. Both species play a role in the improvement of the performance of silicon-based materials as anodes in lithium-ion batteries. In comparison with materials obtained by the reduction of silica gels and composites, the reduced C-Si hybrid gels stand out thanks to the homogeneous distribution and stability of the species developed., This research was funded by the Ministerio de Ciencia e Innovación de España, the European Union Next Generation EU/PRTR and Science, Technology and Innovation Plan 2018–2022 of the Principado de Asturias with the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 and IDI/2021/50921. N.R.-R. is grateful to the Horizon-MSCA-2021-PF-01-01 call for financial support through the Metgel project 101059852. SFL thanks their PhD grant from “Severo Ochoa” program of the Principado de Asturias., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of the surface chemistry of carbon xerogel-based supports and Cu catalysts in the oxidation reaction of glycerol

  • Flores López, Samantha Lizette
  • Gómez González, Naila
  • Arenillas de la Puente, Ana
  • Cadus, Luis E.
  • Morales, María R.
Carbon xerogel with pore size of about 10 nm were obtained using the sol–gel method and applying different thermal treatments. Catalysts were prepared depositing 3 wt% of copper on the xerogel. The catalytic activities of catalysts and supports were evaluated in the selective oxidation of glycerol (GLY). The supports showed good conversion and selectivity to glyceric acid (GA) and lactic acid (LA), with higher preference to GA. For the catalysts, the conversions were slightly higher, and the order of selectivity changed, benefiting the production of LA. Changes in selectivity between supports and catalysts were mainly associated with the different acid-base surface characteristics and the presence of the Cu domains in the catalysts. In the supports, even if the thermal treatment applied modifies the type and content of oxygenated functional groups (OFG) on the surface, predominates a superficial acid character, addressing the selectivity to GA. On the other hand, the basic character of the catalysts due to the Cu presence and the large metallic domain sizes favoured the production of LA. During the recycle test, supports and catalysts showed a decrease in catalytic activity. After three recycles, the catalytic performances of catalysts and supports were similar due to metal leaching., Authors gratefully acknowledge the founding received through PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 projects granted by Ministerio de Ciencia e Innovación from Spain and European Union NextGeneration EU/PRTR; and Principado de Asturias, Spain, for the project IDI/2021/50921 and SLFL pre-doctoral grant through “Severo Ochoa” program. The authors are also grateful to the Universidad Nacional de San Luis (UNSL), Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT) and Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing Aluminium-Ion Battery Performance with Carbon Xerogel Cathodes

  • Almodóvar, Paloma
  • Rey-Raap, Natalia
  • Flores López, Samantha Lizette
  • Sotillo, Belén
  • Santos, Lara
  • Tinoco, Miguel
  • Ramírez-Castellanos, Julio
  • Álvarez-Serrano, Inmaculada
  • López, María Luisa
  • Cameán Martínez, Ignacio
  • Arenillas de la Puente, Ana
  • Chacón, Joaquín
  • García Suárez, Ana Beatriz
This study presents groundbreaking results in the field of rechargeable aluminium-ion batteries, achieving stable capacities exceeding 300 mAh g−1 for more than 300 cycles. The key to this achievement lies in the utilization of tailor-made carbon materials and a urea-AlCl3-based electrolyte. The article investigates the optimal physicochemical properties of the active material necessary for effective electrodes for these aluminium-ion batteries. This investigation employs a wide range of materials characterization techniques (XRD, SEM-EDX, N2 adsorption-desorption isotherms, Hg porosimetry, XPS, FTIR, Raman and TEM-EDX) and electrochemical performance analyses to delve into the subject. These findings represent a significant improvement in the capacity of aluminium-ion batteries, bringing us closer to their implementation and commercialization. This achievement is attributed to the utilization of readily available, cost-effective, and non-corrosive materials. The ability to customize carbon xerogels and the use of the urea-AlCl3 electrolyte offer promising avenues for the practical implementation of these advanced battery technologies, leading to further enhancements in their performance and widespread adoption in various applications., This research was funded by the Ministerio de Ciencia e Innovación de España, the European Union Next Generation EU/PRTR and Science, Technology and Innovation Plan2018–2022 of the Principado de Asturias with the projects PCI2020-112039 MCIN/ AEI-10.13039/501100011033, PID2020-113001RB-I00 MCIN/AEI- 10.13039/501100011033 and IDI/2021/50921. N. R.-R. is grateful to the Horizon-MSCA-2021-PF-01-01 call for financial support through the Metgel project 101059852., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design, development and optimization of highly reliable 2 V solid-state supercapacitor device based on graphene-doped carbon gel and MnO2 electrodes

  • Lufrano, Francesco
  • Chebil, Achref
  • Thomas, Minju
  • Brigandi, Antonino
  • Rey-Raap, Natalia
  • Arenillas de la Puente, Ana
Supercapacitors are revolutionising smart electronics devices by offering an excellent lifetime, outstanding energy and high power densities. In this context, we report on the synthesis of manganese dioxide using a convenient co-precipitation method, exploring its application as a positive pseudocapacitive electrode material, as well as the synthesis of carbon xerogel for use as a negative electrode, alongside the use of a solid-state electrolyte based on Na<sup>+</sup>-form Aquivion membrane. When the device is merged in an asymmetric external configuration, the resulting solid-state supercapacitor exhibits good electrochemical performance, as demonstrated by: i) a high specific capacitance of 110 F·g<sup>−1</sup>, ii) a high energy density of 16.7 Wh·kg<sup>−1</sup> at a power density of 207 W·kg<sup>−1</sup>; and iii) an outstanding capacitance retention of 78 % after 50,000 cycles with an expanded voltage window of 2 V. To demonstrate their practical applicability, the developed devices were connected in series to power a fan and red LEDs with an external and internal configurations (up to 4 V), successfully powering them for several minutes. The proposed fabrication approach is simple to scale up and provides a sustainable, cost-effective manufacturing process for freestanding electrodes based on carbon xerogel/MnO<inf>2</inf> nanocomposites towards next generation smart electronic devices., This research is funded by M-ERA.NET Network through INNENERMAT project, and from grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/10.13039/501100011033. The author A.C. thanks the European Union – Next Generation EU from the Italian Ministry of Environment and Energy Security POR H2AdP MMES/ENEA with involvement of CNR and RSE, PNRR - Mission 2, Component 2, Investmento 3.5, CUP B93C22000630006 “Ricerca e sviluppo sull' idrogeno”, for his postdoc position., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proof of concept of flexible supercapacitors fabricated with carbon gels and MnO2 printed on carbon cloth

  • Lufrano, Francesco
  • Chebil, Achref
  • Brigandì, Antonino
  • Rey-Raap, Natalia
  • Sinopoli, Stefano
  • Arenillas de la Puente, Ana
  • Emanuele, Umberto
Up to now, the scientific community has achieved a significant progress in designing innovative, flexible and conductive materials, paving the way for the advancement of cutting-edge electronic devices dedicated for smart wearable applications. Herein, the introduction of carbon cloth (CC)-based platform for energy storage devices was adopted for nanomaterial coating and improved multilayer adhesion. Using carbon xerogel (CX) and manganese dioxide (MnO<inf>2</inf>) printed on CC, an asymmetric supercapacitor was developed, achieving a high specific capacitance of 213 F g<sup>−1</sup>, energy density of 24 Wh·kg<sup>−1</sup>, at a power density of 180 W kg<sup>−1</sup>, and low self-discharge rate with a voltage retention of 72 % after 22 h. This work paves the way for the adoption of carbon cloth thanks to its outstanding features as a promising and flexible platform to drive the development of next-generation smart and wearable electronic devices dedicated for healthcare and environmental monitoring applications., This research was funded by ERA.NET Network (www.m-era.net/) through INNENERMAT project, and from grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/10.13039/501100011033. The author Achref Chebil thanks the European Union – Next Generation EU from the Italian Ministry of Environment and Energy Security POR H2 AdP MMES/ENEA with involvement of CNR and RSE, PNRR - Mission 2, Component 2, Investment 3.5 "Ricerca e sviluppo sull'idrogeno", CUP: B93C22000630006., Peer reviewed