Pasar al contenido principal

DESARROLLO DE NUEVOS MATERIALES DE CARBONO POLIMERICOS PARA EL ALMACENAMIENTO DE ENERGIA EN BATERIAS DE DOBLE ION DE SODIO

PID2020-113001RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 37
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A promising silicon/carbon xerogel composite for high-rate and high-capacity lithium-ion batteries

  • Santos-Gómez, Lucía dos
  • Cuesta Pedrayes, Nuria
  • Cameán Martínez, Ignacio
  • García-Granda, Santiago
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
Silicon-based anodes are widely studied as an alternative to graphite anodes for lithium-ion batteries. Nevertheless, their practical application is mainly limited by the huge volume change that silicon particles undergo due to alloying and de-alloying with lithium ions during discharge/charge processes, which result in cracks and electrode degradation. In the present study, porous silicon-carbon composites are investigated as anode materials for next-generation lithium-ion batteries. These composites are prepared by a cost-effective, easily-scalable method based on a microwave assisted approach for the carbon matrix, followed by dispersion of the silicon in 2-propanol. The electrochemical behavior of the Si/C composites with different proportions of silicon is evaluated in terms of alloying and de-alloying mechanisms of lithium ions, battery reversible capacity, irreversible capacity in the first cycle, retention of capacity along cycling, and cycle efficiency. The composite with 30 wt.% of silicon presents specific discharge capacity as high as 917 mAh g−1 after 200 cycles and excellent stability in the long-term at high current density, which makes it a promising candidate for the lithium-ion battery market., This research was supported by MCIN/AEI/10.13039/501100011033 and “European Union NextGenerationEU/PRTR” (Project ID2020–113001RB-I00) and Asturian Regional Government (GRUPIN2021 IDI/2021/000031). Lucía dos Santos-Gómez thanks the Ministerio de Ciencia, Innovación y Universidades for her Juan de la Cierva Incorporación grant (IJC2020–044746-I). Ignacio Cameán acknowledges the funding from Fundación General CSIC (Programa ComFuturo, II Edition)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hybrid rf-si xerogels: A cost-effective proposal for insulator materials

  • Flores-López, Samantha L.
  • Fernández Villanueva, Sara
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
This article belongs to the Topic Nanomaterials for Sustainable Energy Applications., Hybrid xerogels RF/Si were synthesized by controlling the chemical variables involved in the polymerization process (i.e., molar ratios, dilution ratio, catalysts, etc.) and evaluated as insulator materials. Higher insulating performances were recorded for these hybrids compared with their counterparts made from only one of their components (i.e., RF or Si xerogels with similar porous characteristics). The analysis of chemical and structural features correlated with heat transfer methods was useful in understanding the sum of contributions involved in the thermal conductivity of RF/Si xerogels. Variables such as roughness and tortuosity can be used to improve the performance of xerogels from a different perspective. In this way, thermal conductivities of 25 mW/mK were achieved without lengthy process steps or special drying methods. Knowledge of material design and the use of microwave heating during the synthesis allowed us to approach a simple and cost-effective process. These results suggest that the hybrid materials developed in this work are a good starting point for the future of the massive production of insulation materials., This research was possible thanks to the grant PID2020-113001RB-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; Grant PCI2020-112039 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; MICIN IJC2019-040875-I; Administración del Principado de Asturias “Severo Ochoa” program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Facile Synthesis of Unsupported Pd Aerogel for High Performance Formic Acid Microfluidic Fuel Cell

  • Martínez-Lázaro, Alejandra
  • Ramírez Montoya, Luis Adrián
  • Ledesma-García, Janet
  • Montes Morán, Miguel Ángel
  • Gurrola, Mayra P
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Arriaga, Luis G
In this work, unsupported Pd aerogel catalysts were synthesized for the very first time by using microwaves as a heating source followed by a lyophilization drying process and used towards formic acid electro-oxidation in a microfluidic fuel cell. Aerogels were also made by heating in a conventional oven to evaluate the microwave effect during the synthesis process of the unsupported Pd aerogels. The performance of the catalysts obtained by means of microwave heating favored the formic acid electro-oxidation with H2SO4 as the electrolyte. The aerogels' performance as anodic catalysts was carried out in a microfluidic fuel cell, giving power densities of up to 14 mW cm-2 when using mass loads of only 0.1 mg on a 0.019 cm2 electrode surface. The power densities of the aerogels obtained by microwave heating gave a performance superior to the resultant aerogel prepared using conventional heating and even better than a commercial Pd/C catalyst., Mexican Council for Science and Technology (CONACYT) through project Ciencia de Frontera Grant no. 845132 and estancia Sabatica Conacyt 2021-2. Grant PID2020-113001RB-I00 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; Grant PCI2020-112039 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Designing nanostructud materials by sol-gel synthesis

  • Arenillas de la Puente, Ana
This work was financially supported by the Spanish Ministerio de Ciencia e Innovación and the European Union through the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033, respectively.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Optimizing the insulation performance of hybrid materials through their chemical and structural properties

  • Flores-López, Samantha L.
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
Authors thanks proyects PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 funded by Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR. NRR and SLF are greatful for their postdorctoral and predoctoral grants funded by Ministerio de Ciencia e Innovación de España (IJC2019-040875-I) and Principality of Asturias (Severo Ochoa Program) respectively
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

The effect of surface área on the electrochemical performance of carbon aerogels as anodes for sodium dual-ion batteries

  • Flores-López, Samantha L.
  • Lobato Ortega, Belén
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
  • Rey Raap, Natalia
This work was financially supported by the Spanish Ministerio de Ciencia e Innovación and the European Union through the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033, respectively. SFL is grateful for her predoctoral grant received from the Administración del Principado de Asturias through the “Severo Ochoa” program, and NRR gratefully acknowledges the Ministerio de Ciencia e Innovación for her postdoctoral grant IJC2019-040875-I.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Aerogeles de grafeno como materiales para extracción en fase sólida

  • Flores-López, Samantha L.
  • Santos Gómez, Lucía dos
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
Los autores agradecen la financiación recibida por parte del Ministerio de Ciencia e Innovación de España y de la Unión Europea NextGeneration EU/PRTR (PCI2020-112039 MCIN/AEI- 10.13039/501100011033, PID2020-115334GB-I00 MCIN/AEI-10.13039/501100011033 y PID2020- 113001RB-I00 MCIN/AEI-10.13039/501100011033), así como la ayuda del Principado de Asturias (AYUD/2021/50921, IDI/2021/000015 y Programa Severo Ochoa de SLF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Electrodos de xerogeles de carbono para baterías de doble ion na+/anión

  • Cameán Martínez, Ignacio
  • Lobato Ortega, Belén
  • Rey Raap, Natalia
  • Santos Gómez, Lucía dos
  • Flores-López, Samantha L.
  • Arenillas de la Puente, Ana
  • García Suárez, Ana Beatriz
MICIN y UE NextGeneration EU/PRTR (PID2020-113001RB-I00MCIN/AEI- 10.13039/501100011033) y Principado de Asturias (AYUD/2021/50921, Beca Pre-doctoral Severo Ochoa de SFL). Ayudas MICIN de NRR (IJC2019-040875-I) y LdSG (IJC2020-044746-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Sintesis de SiC y cSi a partir de geles híbridos para su aplicación en electroquímica

  • Flores-López, Samantha L.
  • Fernández Villanueva, Sara
  • Santos Gómez, Lucía dos
  • Rey Raap, Natalia
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
Los autores agradecen la financiación por parte del Ministerio de Ciencia e Innovación de España, en conjunto con la Unión Europea NextGeneration EU/PRTR (PCI2020-112039 MCIN/AEI-10.13039/501100011033 y PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033), así como por la beca postdoctoral de NRR y LdSG (IJC2019-040875-I, IJC2020-044746-I). Además de la financiación recibida del Principado de Asturias (AYUD/2021/50921 y Programa Severo Ochoa de SLF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Nanomateriales porosos basados en aerogeles de grafeno: aplicación en biosensores electroquímicos

  • Sánchez Suárez, Mario
  • Rey Raap, Natalia
  • Santos Gómez, Lucía dos
  • Blanco-López, María del Carmen
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
Los autores agradecen la financiación del Ministerio de Ciencia e Innovación de España y de la Unión Europea NextGeneration EU/PRTR (PID2020-113001RB-I00 I00 MCIN/AEI-10.13039/501100011033), así como la ayuda del Principado de Asturias (AYUD/2021/50921 y AYUD/2021/52132). MSS agradece al CSIC por su beca de introducción a la investigación - Programa JAE (JAEIntro2021-INCAR-2). NRR y LdSG agradecen al Ministerio de Ciencia e Innovación por sus ayudas JdC-I (IJC2019-040875-I y IJC2020- 044746-I, respectivamente)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduced graphene oxide aerogels cartridges for solid phase extraction of benzotriazoles

  • Flores-López, Samantha L.
  • Arenillas de la Puente, Ana
  • Mikšík, Ivan
  • Menéndez Díaz, José Ángel
  • Montes Morán, Miguel Ángel
UV-benzotriazoles have been identified as water micropollutants that cause serious problems for human health and the environment. Their low concentration in water bodies complicates their detection by direct water analysis, slowing the corrective actions to avoid bioaccumulation. In this regard, the use of graphene-based materials with a high affinity for non-polar molecules has been demonstrated to be a potential tool for the optimal separation and concentration of this type of molecules in solid phase extraction (SPE) processes. This work evaluates the potential of novel reduced graphene oxide aerogels (rGO) as extractants of mixtures of three UV-benzotriazoles in water at low concentrations. These rGO aerogels incorporate graphenic domains into a tough structure of polymeric chains by adding graphene oxide during the synthesis of resorcinol-formaldehyde gels. Aerogels with a different content and ordering of graphenic domains were obtained and characterized using Raman, XRD, SEM and nitrogen adsorption isotherms (−196 °C). The rGO aerogels that performed better as solid phase extractants were those containing 60% rGO. Aerogels with lower rGO contents (40%) required a high-temperature (2000 °C) treatment to render competitive results. The SPE methodology using selected rGO aerogels was optimized by varying the elution solvent, elution time and volume. The best performances, i.e., recoveries of 80–100% and enrichment factors of 12.5–50, were accomplished when using 0.8 mL of tetrahydrofuran (THF) as an elution solvent. As a result, a fast (10 min) and simple extraction method of UV-benzotriazoles in water was attained, achieving a detection limit of 1 ng mL−1. Selected aerogels were finally tested for the SPE of spiked samples of river waters, showing a similar performance to that observed with synthetic mixtures., This research was funded by Consejo Superior de Investigaciones Científicas (CSIC), grant number I-LINK1200; Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR, grant numbers PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-115334GB-I00 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033; Principado de Asturias (FICYT)–European Union (FEDER), grant number PCTI-Asturias IDI/2021/000015; and Czech Science Foundation, grant number 20-03899S. S.L.F.-L. acknowledges her predoctoral grant from the Severo Ochoa Program, awarded by Principado de Asturias. J.A.M. and M.A.M.-M. are members of the CSIC Interdisciplinary Thematic Platform (PTI+) for Sustainable Plastics towards a Circular Economy (PTI-SusPlast+)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Estudio del mecanismo de intercalación electroquímica del anión PF6- en electrodos de grafito

  • Cameán Martínez, Ignacio
  • Lobato Ortega, Belén
  • Cuesta Pedrayes, Nuria
  • García Suárez, Ana Beatriz
Fundación General CSIC (Programa ComFuturo), Ministerio de Ciencia e Innovación en conjunto con la Unión Europea NextGeneration (Proyecto PID2020-113001RB-I00 MCIN/AEI- 10.13039/501100011033) y Principado de Asturias (Proyecto AYUD/2021/50921) por la financiación del trabajo., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Estudio electroquímico de aerogeles nanoestructurados basados en metales de transición

  • González Lavín, Judith
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
Este trabajo ha sido financiado por el Ministerio de Ciencia e Innovación y la Unión Europea a través de los proyectos PCI2020-112039 MCIN/AEI-10.13039/501100011033 y PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033, respectivamente. NRR agradece al Ministerio de Ciencia e Innovación la financiación de su beca posdoctoral IJC2019-040875-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Customized Carbon Aerogels as positive electrode materials in Li-ion capacitors

  • Canal Rodríguez, María
  • Arnaiz, M.
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
  • Ajuria, J.
This research was possible thanks to the grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR. NRR also thanks to MICIN IJC2019-040875-I., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Doped Carbon Xerogels As Electrodes In Solid-State Asymmetric Supercapacitors

  • Rey Raap, Natalia
  • Flores-López, Samantha L.
  • Santos-Gómez, Lucía dos
  • Thomas, Minju
  • Lufrano, Francesco
  • Arenillas de la Puente, Ana
This research was possible thanks to the grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/ 10.13039/50110001103 and by the European Union NextGenerationEU/PRTR. NRR and SLFL also thanks to MICIN IJC2019-040875-I, and Principado de Asturias “Severo Ochoa” program, respectively. Besides, authors acknowledge the financial support from the INNENERMAT project. This project has received funding from EU Network M-ERA.NET (European Research Area Network for Materials Research and Innovation) Consortium, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Graphene-doped Carbon Xerogels as Anode Materials in Sodium-ion Batteries

  • Rey Raap, Natalia
  • Flores-López, Samantha L.
  • Lobato Ortega, Belén
  • Santos-Gómez, Lucía dos
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
This work was financially supported by the Spanish Ministerio de Ciencia e Innovación and the European Union through the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033, respectively. SFL is grateful for her predoctoral grant received from the Administración del Principado de Asturias through the “Severo Ochoa” program, and NRR and LdSG gratefully acknowledge the Ministerio de Ciencia e Innovación for her postdoctoral grant IJC2019-040875-I and IJC2020- 044746-I, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Novel Ordered Carbon Materials for the Analysis of Aromatic Compounds

  • Flores-López, Samantha L.
  • Santos-Gómez, Lucía dos
  • Menéndez Díaz, José Ángel
  • Arenillas de la Puente, Ana
  • Montes Morán, Miguel Ángel
This work was financed by Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR (PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-115334GB-I00 MCIN/AEI- 10.13039/501100011033 y PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033). LdSG and SLF gratefully acknowledges to Ministerio de Ciencia e Innovación de España and Principality of Asturias for their post and predoctoral grants (IJC2020-044746-I and Severo Ochoa Program), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Performance of C/cSi Hybrids and Composites as Anode Material in Li-ion Batteries

  • Flores-López, Samantha L.
  • Fernández Villanueva, Sara
  • Lobato Ortega, Belén
  • Santos-Gómez, Lucía dos
  • Rey Raap, Natalia
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
Authors thanks the financial support received from Ministerio de Ciencia e Innovación de España and European Union NextGeneration EU/PRTR with the projects PCI2020-112039 MCIN/AEI- 10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033. NRR and LdSG are grateful for their postdoctoral grants funded by Ministerio de Ciencia e Innovación de España (IJC2019- 040875-I and IJC2020-044746-I). SLF gratefully acknowledges to Principality of Asturias for their pre-doctoral grant through Severo Ochoa Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

A carbon xerogel-based cathode for sodium dual-ion batteries

  • Cameán Martínez, Ignacio
  • Lobato Ortega, Belén
  • Rey Raap, Natalia
  • Santos-Gómez, Lucía dos
  • Flores-López, Samantha L.
  • Arenillas de la Puente, Ana
  • García Suárez, Ana Beatriz
Projects: PID2020-113001RB-100 funded by MCIN/AEI and the European Union NextGenerationEU/PRTR; and IDI/2021/50921 from Principado de Asturias. NRR and LdSG acknowledge the Ministerio de Ciencia e Innovación for their Juan de la Cierva grants (IJC2019-040875-I and IJC2020-044746-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Crystalline silicon gels as anode material for lithium-ion batteries

  • Flores-López, Samantha L.
  • Santos-Gómez, L.
  • Rey Raap, Natalia
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
  • García-Granda, Santiago
thanks to the grants PID2020-113001RB-100, PID2020-113558RB-C41, and PCI2020-112039 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; and the grants from Principado de Asturias IDI/2021/50921 and IDI/2021/50997. NRR y LdSG gratefully acknowledge to the MICIN for their postdoctoral grants (IJC2019-040875-I and IJC2020-044746-I, respectively); SFL thanks to the Principado de Asturias for the grant received through Severo Ochoa program, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Microwave-Assisted Synthesis of Iron-Based Aerogels with Tailored Textural and Morphological Properties

  • González Lavín, Judith
  • Arenillas de la Puente, Ana
  • Rey Raap, Natalia
Iron aerogels have been synthesized by microwave heating for the first time. Therefore, it is essential to optimize this synthesis process to evaluate the possibility of obtaining nanometric materials with tailored properties and fitting them to the needs of different applications. Herein, the effect of the ratio between reagents and the time of synthesis on the final textural, morphological, and structural properties has been evaluated. The micro-meso-macroporosity of the samples can be tailored by modifying the ratio between reagents, whereas the time of synthesis has only a slight effect on the microporosity. Both the proportion between reagents and the time of synthesis are essential to controlling the nanometric morphology, making it possible to obtain either cluster- or flake-type structures. Regarding the chemical and structural composition, the samples are mainly composed of iron(II) and iron(III) oxides. However, the percentage of iron(II) can be modulated by changing the ratio between reagents, which implies that it is possible to obtain materials from highly magnetic materials to materials without magnetic properties. This control over the properties of iron aerogels opens a new line of opportunities for the use of this type of material in several fields of applications such as electrochemistry, electrocatalysis, and electrical and electronic engineering., This work was funded by Ministerio de Ciencia e Innovación through the projects PCI2020-112039 (MCIN/AEI-10.13039/501100011033) and PID2020-113001RB-100 (MCIN/AEI/10.13039/501100011033) by the European Union NextGenerationEU/PRTR and by the Principado de Asturias (GRUPIN2021 IDI/2021/50921). N.R.-R. is grateful to the Horizon-MSCA-2021-PF-01-01 call for the financial support through the Metgel project 101059852., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimizing the Performance of a Graphitized Carbon Xerogel as Cathode for Sodium Dual-Ion Batteries

  • Cameán Martínez, Ignacio
  • Lobato Ortega, Belén
  • Rey Raap, Natalia
  • Santos-Gómez, Lucía dos
  • Flores López, Samantha Lizzette
  • Arenillas de la Puente, Ana
  • García Suárez, Ana Beatriz
The objective of this study is to optimize the performance of a graphitized carbon xerogel doped with graphene oxide (GXGO) as cathode for sodium dual-ion batteries. Carbon xerogels are synthetic materials produced in large amounts, with well-controlled chemistry, porosity and structure, by a simple and fast microwave process that has been scaled-up. The intercalation of PF6− anions from various NaPF6 salt-based electrolytes in a GXGO-based cathode is investigated by considering the influence of the upper cut-off voltage (UCOV) and of the electrolyte on the electrochemical parameters. The best results were attained in an electrolyte with a 2.0 M NaPF6 concentration in EC : EMC carbonate solvent mixture with added FEC, at a UCOV of 5.0 V. GXGO cathode provides a discharge capacity of 47 mAh g−1 after 2500 cycles with a coulombic efficiency of 97 %. Moreover, it shows great cycling stability and capacity retention of essentially 100 % after the initial cycles., This research was possible thanks to PID2020-113001RB-100 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; and the project from Principado de Asturias IDI/2021/50921. LdSG and NRR acknowledge the Ministerio de Ciencia e Innovación for their postdoctoral Juan de la Cierva Incorporación grants (IJC2019-040875-I and IJC2020-044746-I, respectively)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

CuO metallic aerogels with a tailored nodular morphology

  • Santos-Gómez, Lucía dos
  • Rey Raap, Natalia
  • García-Granda, Santiago
  • Arenillas de la Puente, Ana
This work reports, for the first time, an efficient and fast microwave-based method for the preparation of CuO aerogels. For that, CuCl2, glyoxylic acid and sodium carbonate are employed as reagents. Different experimental conditions such as synthesis temperature, synthesis time and concentration of the precursor solution are investigated to design CuO aerogels with customizable nodular morphologies. The resulting aerogels exhibit well-defined three-dimensional structures and nodular sizes, and therefore, textural properties vary according to the experimental parameters applied in their synthesis., This work was supported by the PID2020-113001RB-100 project, funded by Ministerio de Ciencia e Innovación (MCIN) (MCIN/AEI/10.13039/501100011033) and by the European Union NextGenerationEU/PRTR; MCIN-21-PID2020-113558RB-C41 project, funded by MCIN and the projects from Principado de Asturias (GRUPIN2021 IDI/2021/50921 and SV-PA-21-AYUD/2021/50997). L. d. S. G. thanks the Universidad de Málaga for the funding. N. R. R. is grateful to the Horizon-MSCA-2021-PF-01-01 call for financial support through the Metgel project 101059852., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Tailored carbon aerogels as positive electrodes in Li-ion capacitors: Porosity analysis for a suitable electrochemical performance

  • Canal Rodríguez, María
  • Arnaiz, María
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
  • Ajuria, Jon
Nowadays, carbons are reaching high attention in the field of materials science due to their low cost and good availability. However, in most of their potential applications, specific characteristics are required for their good performance. The properties of natural carbon materials sometimes are not easy to modify as they are directly related to their precursor source. Carbon aerogels are promising materials to solve this drawback as their porosity can be easily tailored by selecting suitable initial conditions during the synthesis. Although these materials have been already employed in a wide range of applications, the combination of a well-developed porosity with high electrical conductivity, normally opposite characteristics in carbon materials, makes them suitable candidates for being used in high-power electrochemical devices. In this sense, carbon aerogels might be of interest for a technology such as lithium-ion capacitors, which, despite having reached the market, still require improvements to trigger their expansion. In the present study, carbon aerogels are used as positive electrodes, in which it is observed that micropores are essential to attain high capacitances at low current densities and that the presence of mesopores is a key factor for the stability of the device in the range of medium-high current densities. However, a certain diameter of mesoporous is essential for their effectiveness., This research was possible thanks to the grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/ 10.13039/501100011033 and by the European Union NextGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Analysis of PF6− Anion Intercalation/De-Intercalation Mechanisms in Graphite Cathodes of Sodium Dual-Ion Batteries

  • Cameán Martínez, Ignacio
  • Lobato Ortega, Belén
  • Cuesta Pedrayes, Nuria
  • García Suárez, Ana Beatriz
A detailed study of the intercalation/de-intercalation mechanisms of PF6− anions in a graphite cathode of sodium dual-ion batteries is carried out by cyclic voltammetry. The influence of the continuous anion intercalation/de-intercalation on the graphite structure is investigated by ex-situ XRD after cycling. It was concluded that the intercalation/de-intercalation occurs through a combination of diffusion-controlled and pseudocapacitive mechanisms. Initially, the contribution of the diffusion-controlled is significant, specifically at the highest voltage and at the lowest scan rates which agrees with the slow kinetic of this mechanism and its usual prevalence in carbon materials with a graphitic structure. However, the continuous anion intercalation/de-intercalation causes some deterioration of the graphite structural order, even from the initial cycles, as it was demonstrated by the evolution of the crystalline parameters, interlayer spacing, d002, and crystallite size, Lc. This deterioration hinders the diffusion-controlled anion intercalation/de-intercalation and, as a consequence, the pseudocapacitive becomes the main mechanism along cycling. Therefore, since graphite is capable of intercalating PF6− anions at high voltages through a capacitive mechanism, with its consequent rapid kinetics, this carbon material is an excellent candidate for using as cathode in high power sodium dual-ion batteries, in which, kinetically fast mechanisms are required., This research was supported by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR (Project PID2020-113001RB-I00) and Principado de Asturias (Project IDI/2021/50921). I. Cameán thanks the funding from Fundación General CSIC (Programa ComFuturo, II Edition) to develop the work., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Graphene Doped Carbon-Gels and MnO<inf>2</inf> for Next Generation of Solid-State Asymmetric Supercapacitors

  • Rey Raap, Natalia
  • Flores López, Samantha Lizette
  • Santos-Gómez, Lucía dos
  • Brigandì, Antonino
  • Thomas, Minju
  • Stoyanova, Antonia E.
  • Lufrano, Francesco
  • Arenillas de la Puente, Ana
Supercapacitors are playing a very relevant role in many applications due to their capability to supply high power density and long durability. However, there is a growing demand to increase their energy density, in gravimetric and volumetric basis. There are different strategies to increase supercapacitor performance by improving the active materials used in the electrodes, the type of electrolyte used or even the configuration employed in the cell. In this work, a combination of these strategies is presented with the use of different active materials, electrolytes, and symmetric vs. asymmetric configuration. The supercapacitor with asymmetric configuration using the graphene-doped carbon xerogel in the negative electrode and the manganese oxide in the positive electrode, along with the use of Na+-form Aquivion electrolyte membrane as solid electrolyte, seems to be a promising combination to obtain a substantial enhancement of both gravimetric and volumetric capacitance. Furthermore, the device presents great stability in a wide operational voltage window from 0 to 1.8 V and with a neutral pH polymer electrolyte which contributes to improve the performance, safety, and long cycle life of the device., This research was possible thanks to the grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGeneration EU/PRTR. Authors also acknowledge the financial support from EU Network M-ERA.NET through INNENERMAT project, and the financial support of the Ministry of Education and Science of the Republic of Bulgaria under the National Program “European Scientific Networks” (Agreement D01-286/07. 10. 2020). NRR and SLFL also thank to MSCA and Principado de Asturias “Severo Ochoa” program, respectively., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel and high electrocatalytic activity aerogel Pd-TM (TM=Co, Ni, Fe)

  • Martínez-Lázaro, A.
  • Rodriguez-Barajas, M.H.
  • Rey Raap, Natalia
  • Espinosa, F. I.
  • Álvarez-Contreras, L.
  • Ledesma-García, J.
  • Arenillas de la Puente, Ana
  • Arriaga, L. G.
In the present research work, unsupported Pd-TM aerogel catalysts are prepared by an ultrafast synthesis by means of a combination of microwave heating and lyophilization. These novel aerogels are synthesized to explore the effect of transition metals on a Pd aerogel matrix in order to reduce the dependence on noble metals and increase its electrocatalytic properties for different electrochemical reactions. Physicochemical characterization of Pd-TM aerogels reveals a successful combination of high specific surface area, electrochemical surface area, and specific oxidation states. The combination of these properties in Pd-TM aerogels enhances the electrocatalytic activity towards ethanol electrooxidation compared to bare Pd aerogels. Among all the Pd-TM, PdNi aerogel presents the highest current per unit mass with 117 mA/mg, being a clear improvement compared to the Pd aerogel (48 mA/mg)., Authors thank to Consejo Nacional de Ciencia y Tecnología CONACYT (Mexico) for funding through the Ciencia de Frontera 2020–845132, 2019-39569 and LN-321116. Also to Ministerio de Ciencia e Innovacion (Spain), the European Union Next Generation EU/PRTR and Science, Technology and Innovation Plan 2018-2022 of the Principado de Asturias with the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 and IDI/2021/50921. N.R.-R is grateful to the Horizon-MSCA-2021-PF-01-01 call for financial support through the Metgel project 101059852, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of Crystalline Si and SiC Species in the Performance of Reduced Hybrid C/Si Gels as Anodes for Lithium-Ion Batteries

  • Flores López, Samantha Lizette
  • Lobato Ortega, Belén
  • Rey Raap, Natalia
  • Cameán Martínez, Ignacio
  • García Suárez, Ana Beatriz
  • Arenillas de la Puente, Ana
In recent years, the research on lithium-ion batteries (LIBs) to improve their lifetime, efficiency and energy density has led to the use of silicon-based materials as a promising anode alternative to graphite. Specifically, crystalline silicon (cSi) and silicon carbide (SiC) obtained from deposition or reduction processes (e.g., magnesiothermal reduction) stand out for their electrochemical properties. However, the synthesis routes proposed until now have limitations that make them difficult to afford or operate on a large scale. For this reason, in this work, carbon-silicon (C-Si) hybrid materials synthesized through an efficient route are evaluated as the potential precursor for the obtention of both cSi and SiC species in a single material. The feasibility and influence of the magnesiothermal reduction process were evaluated, and materials with 10 wt.% of reduced Si and 10-26 wt.% of SiC were obtained. Both species play a role in the improvement of the performance of silicon-based materials as anodes in lithium-ion batteries. In comparison with materials obtained by the reduction of silica gels and composites, the reduced C-Si hybrid gels stand out thanks to the homogeneous distribution and stability of the species developed., This research was funded by the Ministerio de Ciencia e Innovación de España, the European Union Next Generation EU/PRTR and Science, Technology and Innovation Plan 2018–2022 of the Principado de Asturias with the projects PCI2020-112039 MCIN/AEI-10.13039/501100011033, PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 and IDI/2021/50921. N.R.-R. is grateful to the Horizon-MSCA-2021-PF-01-01 call for financial support through the Metgel project 101059852. SFL thanks their PhD grant from “Severo Ochoa” program of the Principado de Asturias., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of Ni-Doped Graphene Aerogels for Electrochemical Applications

  • González-Barriuso, Marina
  • Sánchez-Suárez, Mario
  • González Lavín, Judith
  • Arenillas de la Puente, Ana
  • Rey Raap, Natalia
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., Carbonaceous materials used in most electrochemical applications require high specific surface area, adequate pore size distribution, and high electrical conductivity to ensure good interaction with the electrolyte and fast electron transport. The development of transition metal doped graphene aerogels is a possible solution, since their structure, morphology, and electrical properties can be controlled during the synthesis process. This work aims to synthesize Ni-doped graphene aerogels to study the role of different nickel salts in the sol-gel reaction and their final properties. The characterization data show that, regardless of the nature of the Ni salts, the surface area, volume of micropores, and enveloped density decrease, while the porosity and electrical conductivity increase. However, differences in morphology, mesopore size distribution, degree of order of the carbon structure, and electrical conductivity were observed depending on the type of Ni salt. It was found that nickel nitrate results in a material with a broader mesopore distribution, higher electrical conductivity, and hence, higher electrochemical surface area, demonstrating that graphene aerogels can be easily synthesized with tailored properties to fit the requirements of specific electrochemical applications., This work was funded by MCIN/AEI/10.13039/501100011033/FEDER-UE, through PID2022-139493OA-100 and PID2020-113001RB-100 projects. MGB is grateful for the funding of the Margarita Salas Grant for the Training of Young Doctors 2021-2023 of the University of Cantabria. MSS is grateful to the PRE2021-098471 PhD grant funded by MCIN/AEI/10.13039/501100011033 and FSE+. JGL is grateful to the Principado de Asturias for her PhD grant from the Severo Ochoa Program. NRR is grateful to the RyC2021-031456-I grant funded by MCIN/AEI/10.13039/501100011033 and European Union NexGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Role of the surface chemistry of carbon xerogel-based supports and Cu catalysts in the oxidation reaction of glycerol

  • Flores López, Samantha Lizette
  • Gómez González, Naila
  • Arenillas de la Puente, Ana
  • Cadus, Luis E.
  • Morales, María R.
Carbon xerogel with pore size of about 10 nm were obtained using the sol–gel method and applying different thermal treatments. Catalysts were prepared depositing 3 wt% of copper on the xerogel. The catalytic activities of catalysts and supports were evaluated in the selective oxidation of glycerol (GLY). The supports showed good conversion and selectivity to glyceric acid (GA) and lactic acid (LA), with higher preference to GA. For the catalysts, the conversions were slightly higher, and the order of selectivity changed, benefiting the production of LA. Changes in selectivity between supports and catalysts were mainly associated with the different acid-base surface characteristics and the presence of the Cu domains in the catalysts. In the supports, even if the thermal treatment applied modifies the type and content of oxygenated functional groups (OFG) on the surface, predominates a superficial acid character, addressing the selectivity to GA. On the other hand, the basic character of the catalysts due to the Cu presence and the large metallic domain sizes favoured the production of LA. During the recycle test, supports and catalysts showed a decrease in catalytic activity. After three recycles, the catalytic performances of catalysts and supports were similar due to metal leaching., Authors gratefully acknowledge the founding received through PCI2020-112039 MCIN/AEI-10.13039/501100011033 and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 projects granted by Ministerio de Ciencia e Innovación from Spain and European Union NextGeneration EU/PRTR; and Principado de Asturias, Spain, for the project IDI/2021/50921 and SLFL pre-doctoral grant through “Severo Ochoa” program. The authors are also grateful to the Universidad Nacional de San Luis (UNSL), Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT) and Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Performance of carbon xerogels as anodes for sodium dual-ion batteries

  • Lobato Ortega, Belén
  • Cuesta Pedrayes, Nuria
  • Cameán Martínez, Ignacio
  • Flores López, Samantha Lizette
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
  • García Suárez, Ana Beatriz
Carbon xerogel with different mean pore sizes (10, 50, 100, 500 nm) but analogous structure, chemical composition, surface area, and microporosity, which are produced by an energy-effective microwave-based process, and activated carbon xerogels (100 nm-pore size) with higher microporosity were investigated as anodes for sodium dual-ion batteries. The objective of this study was to optimize the material textural properties for this specific application to be further matched with a carbon xerogel-based cathode in a full battery configuration. To this end, the role of these properties was evaluated, specifically the pore size and the microporosity since the storage of the Na+ ions in these carbon xerogels was demostrated to occur mainly by a pseudocapacitive mechanism based on adsorption on surface, defects (i.e. microporosity) and pores. The balance between the pore size and the associated external surface area of the carbon xerogels was a determining factor for their anodic performance. In this context, a material pore size of ∼ 100 nm and an associated external surface area of ∼ 100 m2 g−1 was the optimum balance. For a given material pore size, the increase of the microporosity by physical activation improved the anode capacity as well as the cycling stability. However, the development of the microporosity in relation to the external surface area must be optimized to avoid an undesirable increase in the first cycle irreversible capacity. Overall, the physically activated carbon xerogel with a pore size of 100 nm, a micropore volume of 0.47 cm3 g−1 and an external surface of 123 m2 g−1 was the most suitable active anode material for sodium dual-ion batteries. This material provided a specific discharge capacity of ∼ 154 mAh g−1 after 300 discharge/charge cycles with excellent cycling stability and coulombic efficiency., Financial support from the Spanish Ministry of Science, Innovation and Universities and EU NextGeneration EU/PRTR (PID2020–113001RB-I00 MCIN/AEI-10.13039/501100011033) and Asturias Regional Government (AYUD/2021/50921) is gratefully acknowledged. S.L. Flores thanks the Asturias Regional Government for her pre-doctoral grant Severo Ochoa. N. Rey-Raap is grateful to Spanish Ministry of Science, Innovation and Universities and EU NextGeneration EU/PRTR (RyC2021–031456-I MCIN/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Carbons for fuel cell energy generation

  • Rey Raap, Natalia
  • Santos Gómez, Lucía dos
  • Arenillas de la Puente, Ana
The growing interest in renewable energy has driven the development of fuel cell technologies. However, their mass use still depends on improving durability and lowering costs. Electrode materials play a crucial role in the cost, stability and performance of fuel cells. A suitable electrode should have a high specific surface area, electroactivity, corrosion resistance, electrical conductivity and be cost-effective. Carbon materials have been used as one of the electrode materials almost from the beginning, as carbon is an abundant element and carbon-based materials can be specifically adapted for this purpose. This review provides a detailed description of the evolution of carbon materials as electrocatalyst supports for fuel cells. Starting with the traditional catalysts of platinum supported on carbon black and how alternatives have been proposed with the aim to reduce the content of noble metals or even replace them completely with other active elements such as transition metals, oxides or/and other heter, Authors gratefully acknowledge the founding received by MCIN/AEI/10.13039/501100011033/FEDER-UE through PID2022-139493OA-100, PID2020-113558RB-C41, and PID2020-113001RB-100 projects. NRR is grateful to the RyC2021-031456-I grant funded by MCIN/AEI/10.13039/501100011033 and European Union NexGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Designing and Optimizing Electrode Materials for Energy Harvesting in CAPMIX Cells

  • Lobato Ortega, Belén
  • Flores López, Samantha Lizette
  • Santos Gómez, Lucía dos
  • García, Ana B.
  • Pernía, Alberto M.
  • Prieto, Miguel J.
  • Busto, María G.
  • Arenillas de la Puente, Ana
The growing demand for clean, decentralized energy has increased interest in blue energy, which generates power from water with different salt concentrations. Despite its potential as a renewable, low-cost energy source, optimizing electrode materials remains a challenge. This work presents a nanomaterial developed via microwave-assisted sol-gel methodology for blue energy applications, where ion diffusion and charge storage are critical. AX-7 carbon, designed for this study, features wide pores, enhancing ion diffusion. Compared to commercial NORIT carbon, AX-7 has a higher mesopore volume and external surface area, improving its overall performance. The synthesis process has been optimized and scaled up for evaluation in CAPMIX electrochemical cell stacks. Moreover, the lower series resistance (Rs) significantly boosts energy recovery, with AX-7 demonstrating superior performance. This advantage is especially evident during fresh-water cycles, where this material achieves significantly lower Rs compared to the commercial one., This research was funded by Ministerio de Ciencia e Innovación, Spain, and the European Union NextGeneration EU/PRTR and the Science, Technology and Innovation Plan2018-2022 of the Principado de Asturias with the projects PID2019-110971RB-I00, and PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 and GRUPIN2021 IDI/2021/50921. SLFL also thanks her PhD grant from Severo Ochoa Program of the Principado de Asturias., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing Aluminium-Ion Battery Performance with Carbon Xerogel Cathodes

  • Almodóvar, Paloma
  • Rey-Raap, Natalia
  • Flores López, Samantha Lizette
  • Sotillo, Belén
  • Santos, Lara
  • Tinoco, Miguel
  • Ramírez-Castellanos, Julio
  • Álvarez-Serrano, Inmaculada
  • López, María Luisa
  • Cameán Martínez, Ignacio
  • Arenillas de la Puente, Ana
  • Chacón, Joaquín
  • García Suárez, Ana Beatriz
This study presents groundbreaking results in the field of rechargeable aluminium-ion batteries, achieving stable capacities exceeding 300 mAh g−1 for more than 300 cycles. The key to this achievement lies in the utilization of tailor-made carbon materials and a urea-AlCl3-based electrolyte. The article investigates the optimal physicochemical properties of the active material necessary for effective electrodes for these aluminium-ion batteries. This investigation employs a wide range of materials characterization techniques (XRD, SEM-EDX, N2 adsorption-desorption isotherms, Hg porosimetry, XPS, FTIR, Raman and TEM-EDX) and electrochemical performance analyses to delve into the subject. These findings represent a significant improvement in the capacity of aluminium-ion batteries, bringing us closer to their implementation and commercialization. This achievement is attributed to the utilization of readily available, cost-effective, and non-corrosive materials. The ability to customize carbon xerogels and the use of the urea-AlCl3 electrolyte offer promising avenues for the practical implementation of these advanced battery technologies, leading to further enhancements in their performance and widespread adoption in various applications., This research was funded by the Ministerio de Ciencia e Innovación de España, the European Union Next Generation EU/PRTR and Science, Technology and Innovation Plan2018–2022 of the Principado de Asturias with the projects PCI2020-112039 MCIN/ AEI-10.13039/501100011033, PID2020-113001RB-I00 MCIN/AEI- 10.13039/501100011033 and IDI/2021/50921. N. R.-R. is grateful to the Horizon-MSCA-2021-PF-01-01 call for financial support through the Metgel project 101059852., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Towards the valorisation of glycerol by designing the surface chemistry of carbon xerogels by doping and oxygen functionalization

  • Gómez González, Naila
  • Flores López, Samantha Lizette
  • Cadus, Luis E
  • Arenillas, Ana
  • Morales, María R
Research on innovative approaches to the valorisation of glycerol as a subproduct of biodiesel production has acquired an increasing demand in the development of a circular economy around energy generation, especially, in the line of improvement of the heterogeneous metallic catalysts used. In this regard, carbon xerogels have gained importance due to their stability and modifiability, while transition metals such as copper stand out as a cost-effective alternative, resulting in a technology where surface engineering plays a crucial role in achieving competitive catalytic activity. Building upon this, current research evaluates doped xerogels (Si, N, or GO) as supports of Cu and catalysts by themselves for glycerol oxidation. Benefits from the incorporation of oxygenated functional groups (OFG) were also evaluated. Results showed a consistently higher selectivity towards lactic acid (LA) across all catalysts and competitive catalytic conversion. In this performance, dopants played a crucial role in surface acid-base characteristics, while oxygenated functional groups (OFG) influenced copper adsorption, dispersion, and reducibility. Notably, the Cu/CXN-f catalyst demonstrated the highest LA yield by combining the effect of N as a doping species, with the presence of OFG and the formation of appropriated metallic Cu domains. This research underscores the potential of carbon xerogels in the tailored catalyst design, contributing to sustainable chemical production through their customizable textural and chemical properties., Authors gratefully acknowledge the founding received through PID2020-113001RB-I00 MCIN/AEI-10.13039/501100011033 projects granted by Ministerio de Ciencia e Innovación from Spain and European Union NextGeneration EU/PRTR; and Principado de Asturias, Spain, SLFL grant through “Severo Ochoa” program. The authors are also grateful to the Universidad Nacional de San Luis (UNSL), Agencia Nacional de Promoción Científica y Tecnológica (ANPCyT) and Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET) for their financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design, development and optimization of highly reliable 2 V solid-state supercapacitor device based on graphene-doped carbon gel and MnO2 electrodes

  • Lufrano, Francesco
  • Chebil, Achref
  • Thomas, Minju
  • Brigandi, Antonino
  • Rey-Raap, Natalia
  • Arenillas de la Puente, Ana
Supercapacitors are revolutionising smart electronics devices by offering an excellent lifetime, outstanding energy and high power densities. In this context, we report on the synthesis of manganese dioxide using a convenient co-precipitation method, exploring its application as a positive pseudocapacitive electrode material, as well as the synthesis of carbon xerogel for use as a negative electrode, alongside the use of a solid-state electrolyte based on Na<sup>+</sup>-form Aquivion membrane. When the device is merged in an asymmetric external configuration, the resulting solid-state supercapacitor exhibits good electrochemical performance, as demonstrated by: i) a high specific capacitance of 110 F·g<sup>−1</sup>, ii) a high energy density of 16.7 Wh·kg<sup>−1</sup> at a power density of 207 W·kg<sup>−1</sup>; and iii) an outstanding capacitance retention of 78 % after 50,000 cycles with an expanded voltage window of 2 V. To demonstrate their practical applicability, the developed devices were connected in series to power a fan and red LEDs with an external and internal configurations (up to 4 V), successfully powering them for several minutes. The proposed fabrication approach is simple to scale up and provides a sustainable, cost-effective manufacturing process for freestanding electrodes based on carbon xerogel/MnO<inf>2</inf> nanocomposites towards next generation smart electronic devices., This research is funded by M-ERA.NET Network through INNENERMAT project, and from grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/10.13039/501100011033. The author A.C. thanks the European Union – Next Generation EU from the Italian Ministry of Environment and Energy Security POR H2AdP MMES/ENEA with involvement of CNR and RSE, PNRR - Mission 2, Component 2, Investmento 3.5, CUP B93C22000630006 “Ricerca e sviluppo sull' idrogeno”, for his postdoc position., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proof of concept of flexible supercapacitors fabricated with carbon gels and MnO2 printed on carbon cloth

  • Lufrano, Francesco
  • Chebil, Achref
  • Brigandì, Antonino
  • Rey-Raap, Natalia
  • Sinopoli, Stefano
  • Arenillas de la Puente, Ana
  • Emanuele, Umberto
Up to now, the scientific community has achieved a significant progress in designing innovative, flexible and conductive materials, paving the way for the advancement of cutting-edge electronic devices dedicated for smart wearable applications. Herein, the introduction of carbon cloth (CC)-based platform for energy storage devices was adopted for nanomaterial coating and improved multilayer adhesion. Using carbon xerogel (CX) and manganese dioxide (MnO<inf>2</inf>) printed on CC, an asymmetric supercapacitor was developed, achieving a high specific capacitance of 213 F g<sup>−1</sup>, energy density of 24 Wh·kg<sup>−1</sup>, at a power density of 180 W kg<sup>−1</sup>, and low self-discharge rate with a voltage retention of 72 % after 22 h. This work paves the way for the adoption of carbon cloth thanks to its outstanding features as a promising and flexible platform to drive the development of next-generation smart and wearable electronic devices dedicated for healthcare and environmental monitoring applications., This research was funded by ERA.NET Network (www.m-era.net/) through INNENERMAT project, and from grants PID2020-113001RB-I00 and PCI2020-112039 funded by MCIN/AEI/10.13039/501100011033. The author Achref Chebil thanks the European Union – Next Generation EU from the Italian Ministry of Environment and Energy Security POR H2 AdP MMES/ENEA with involvement of CNR and RSE, PNRR - Mission 2, Component 2, Investment 3.5 "Ricerca e sviluppo sull'idrogeno", CUP: B93C22000630006., Peer reviewed