Pasar al contenido principal

DESARROLLO DE NUEVOS AEROGELES METALICOS BIFUNCIONALES PARA LA MEJORA DE LA TECNOLOGIA DE PILAS DE COMBUSTIBLE REGENERATIVAS UNITARIAS

PID2022-139493OA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Synthesis of Ni-Doped Graphene Aerogels for Electrochemical Applications

  • González-Barriuso, Marina
  • Sánchez-Suárez, Mario
  • González Lavín, Judith
  • Arenillas de la Puente, Ana
  • Rey Raap, Natalia
© 2024 by the authors. Licensee MDPI, Basel, Switzerland. This article is an open access article distributed under the terms and conditions of the Creative Commons Attribution (CC BY) license (https://creativecommons.org/licenses/by/4.0/)., Carbonaceous materials used in most electrochemical applications require high specific surface area, adequate pore size distribution, and high electrical conductivity to ensure good interaction with the electrolyte and fast electron transport. The development of transition metal doped graphene aerogels is a possible solution, since their structure, morphology, and electrical properties can be controlled during the synthesis process. This work aims to synthesize Ni-doped graphene aerogels to study the role of different nickel salts in the sol-gel reaction and their final properties. The characterization data show that, regardless of the nature of the Ni salts, the surface area, volume of micropores, and enveloped density decrease, while the porosity and electrical conductivity increase. However, differences in morphology, mesopore size distribution, degree of order of the carbon structure, and electrical conductivity were observed depending on the type of Ni salt. It was found that nickel nitrate results in a material with a broader mesopore distribution, higher electrical conductivity, and hence, higher electrochemical surface area, demonstrating that graphene aerogels can be easily synthesized with tailored properties to fit the requirements of specific electrochemical applications., This work was funded by MCIN/AEI/10.13039/501100011033/FEDER-UE, through PID2022-139493OA-100 and PID2020-113001RB-100 projects. MGB is grateful for the funding of the Margarita Salas Grant for the Training of Young Doctors 2021-2023 of the University of Cantabria. MSS is grateful to the PRE2021-098471 PhD grant funded by MCIN/AEI/10.13039/501100011033 and FSE+. JGL is grateful to the Principado de Asturias for her PhD grant from the Severo Ochoa Program. NRR is grateful to the RyC2021-031456-I grant funded by MCIN/AEI/10.13039/501100011033 and European Union NexGenerationEU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Revealing the Importance of Iron Aerogel Features as Electrocatalysts for the Oxygen Reduction Reaction

  • González-Lavín, Judith
  • Arenillas, Ana
  • Rey-Raap, Natalia
(This article belongs to the Special Issue Advanced Metal Gels: Synthesis and Applications)., Metal nanoparticles supported in carbon materials are the traditional electrocatalyst currently used in many applications. However, these composite materials have many problems associated with the optimization of both components for the specific application, besides the stability of the mixture. Self-supported metallic materials may be an interesting strategy in order to avoid the traditional carbon supports; however, these metallic materials should present highly active surface area. Iron aerogels are presented in this work as effective and affordable unsupported electrocatalysts. The combination of their metallic structure with high porosity (i.e., 85 m<sup>2</sup> g<sup>−1</sup> and 0.45 cm<sup>3</sup> g<sup>−1</sup> of mesopore volume), due to their interconnected tridimensional structure, leads to a great activity versus the oxygen reduction reaction. A method for producing iron aerogels based on microwave-assisted sol–gel methodology is presented. The incorporation of carbon functionalities to the iron aerogels seems to clearly influence the mechanism of the reaction, favoring the direct mechanism of the oxygen reduction reaction and thus notably improving the performance of the electrocatalysts. Chemical vapor deposition seems to be an adequate methodology for incorporating carbon functionalities to the transition metal structure without affecting the tridimensional network and leading to current densities over 4 mA cm<sup>−2</sup> and great stability even after 10,000 s., This research was funded by MCIN/AEI/10.13039/501100011033/FEDER-UE through the PID2022-139493OA-100 project. NRR is grateful for the RyC2021-031456-I and CNS2023-144627 grants funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. JGL is grateful to the Principado de Asturias for her PhD grant from the Severo Ochoa Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Overcoming Scaling Challenges in Sol–Gel Synthesis: A Microwave-Assisted Approach for Iron-Based Energy Materials

  • González-Lavín, Judith
  • Arenillas de la Puente, Ana
  • Rey Raap, Natalia
There is currently an effort to scale up sol–gel nanomaterials without compromising quality, and microwave heating can pave the way for this due to its heating efficiency, resulting in a fast and homogeneous process. In this work, the sol–gel synthesis of transition metal aerogels, specifically iron-based aerogels, is studied using a microwave-assisted sol–gel methodology in an open-system multimode device as a potential route to scale-up production. Different approaches were tested to evaluate the best way to increase yield per batch, with different vessel shapes and volumes. It is shown that the shape and size of the vessel can be determinant in the interaction with microwaves and, thus, in the heating process, influencing the sol–gel reactions and the characteristics and homogeneity of the obtained nanomaterials. It has been found that a wide vessel is preferable to a tall and narrow one since the heating process is more homogeneous in the former and the sol–gel and cross-linking reactions take place earlier, which improves the mechanical properties of the final nanomaterial. For mass production of nanomaterials, the interaction of the reagents with the microwave field must be considered, and this depends not only on their nature but also on their volume, shape, and arrangement inside the cavity., This research was funded by MCIN/AEI/10.13039/501100011033/FEDER-UE through PID2022-139493OA-100 project. NRR thanks the RyC2021-031456-I and CNS2023-144627 grants funded by MCIN/AEI/10.13039/501100011033 and European Union NexGenerationEU/PRTR. JGL is grateful to the Principado de Asturias for her PhD grant from the Severo Ochoa Program., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Scalable microwave-assisted synthesis of iron oxide aerogels: Tuning morphology, crystallinity, and electrocatalytic performance

  • González Lavín, Judith
  • Arenillas de la Puente, Ana
  • Rey Raap, Natalia
Microwave-assisted iron oxide aerogels were prepared using different microwave heating systems to study the effect of synthesis pressure on their final properties. Additionally, other parameters, such as the ratio of reagents, time and temperature of synthesis, were also evaluated. It was found that iron oxide aerogels synthesized at atmospheric pressure exhibit structural and morphological properties comparable to those produced under pressure, positioning the use of open vessels as a scalable and efficient alternative for the mass production of iron oxide aerogels by microwave heating. Besides, the morphology, structure, and degree of crystallinity can be easily fine-tuned by modifying the ratio between reagents and time and temperature of synthesis. An excess of reducing or metallic precursor favours the formation of cluster structures, while flake-type structures are obtained employing similar proportions. However, the flakes may evolve into clusters by increasing the time of synthesis. Regarding the structural composition, reducing agent-rich conditions favour the synthesis of magnetite, whereas higher metallic precursor concentrations promote goethite formation. However, higher synthesis temperatures shift the phase balance toward magnetite and enhance crystallinity. The electrocatalytic performance of iron oxide aerogels towards the oxygen reduction reaction may be improved by the proper combination of morphology, structure, and degree of crystallinity. Specifically, clusters composed of amorphous goethite result in the most promising material, particularly after applying a reduction process. These findings underscore the versatility of microwave-assisted sol-gel synthesis to modulate the iron oxide aerogel properties and tailor them to the electrocatalyst requirements for the oxygen reduction reaction., This research was funded by MCIN/AEI/10.13039/501100011033/FEDER-UE through the PID2022-139493OA-100 project. NRR is grateful for the RyC2021-031456-I and CNS2023-144627 grants funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. JGL is grateful to the Principado de Asturias for her PhD grant from the Severo Ochoa Program. The authors also thank the Principado de Asturias (ID/2024/000749)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Impact of carbon and nitrogen doping on trimetallic iron–nickel–cobalt aerogels as electrocatalysts for enhanced urea oxidation: A strategy for energy-efficient hydrogen production

  • González Lavín, Judith
  • Rey Raap, Natalia
  • Arenillas de la Puente, Ana
  • Espinosa-Lagunes, F. I.
  • Arriaga, L. G.
  • Ledesma-García, J.
The replacement of the oxygen evolution reaction (OER) with alternative anodic processes offers an attractive approach to reduce energy demand of electrochemical cells. The urea oxidation reaction (UOR) was investigated in a microfluidic electrochemical cell as a substitute for OER. Iron-nickel-cobalt aerogels (FeNiCoA), doped with carbon (C-FeNiCoA) and nitrogen (N-FeNiCoA), were synthesized and tested as anode catalysts. N-FeNiCoA achieved low onset potential of 0.63 V and 33.3 mA cm−2 at 1.42 V, highlighting significant energy savings compared to conventional OER systems. Optimization of the microfluidic conditions demonstrated that a 1 M CO(NH<inf>2</inf>)<inf>2</inf>: 1 M KOH electrolyte maximizes electrocatalytic flux while minimizing parasitic reactions. The integration of an internal Ag/AgCl reference electrode enabled accurate separation of anodic and cathodic overpotentials. This validation confirmed that the total cell current matched the sum of the independent half-cell responses, demonstrating the high efficiency and reliability of N-FeNiCoA in integrated microfluidic platforms., This research was funded by MCIN/AEI/10.13039/501100011033/FEDER-UE through the PID2022-139493OA-100 project. NRR is grateful for the CNS2023-144627 grant funded by MCIN/AEI/10.13039/501100011033 and the European Union NextGenerationEU/PRTR. JGL is grateful to the Principado de Asturias for her PhD grant from the Severo Ochoa Program (BP21-159 and B24-10). The authors also thank the Principado de Asturias (ID/2024/000749), and CSIC for the collaborative project COOPB24069. The authors thank the Secretaría de Ciencia, Humanidades, Tecnología e Innovación (SECIHTI) for financial support through the Ciencia de Frontera 2023 projects, grant 567 and Apoyo LN-2025-C-110., Peer reviewed