Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Growth and Properties of Sb-Ge-Se Thin Films: A Promising Material for Sustainable Photovoltaic Devices Development

  • Bonal, Víctor
  • Khelif, Samira
  • Djurdjic Mijin, Sanja
  • Galiana, Beatríz
  • Sánchez, Yudania
  • García Pardo, Marina
  • Arranz, Antonio
  • Ruiz Marín, Nazaret
  • Lazic, Snezana
  • Serna, Rosalía
  • Caballero, Raquel
Sb-Ge chalcogenides are known as effective phase change materials, making them ideal for optical data storage applications, detectors, and sensors. However, there have been no photovoltaic devices developed using these materials to date. In this work, Sb-Ge-Se crystalline thin films with different [Sb]/[Ge] atomic ratios are successfully grown for the first time through the selenization of co-evaporated Sb and Ge layers. The impact of the Se addition and temperature during the selenization process on the composition, structural, morphological, vibrational, and optical properties of the Sb-Ge-Se layers is investigated. The coexistence of Sb2Se3 and GeSe2 has been confirmed using various characterization techniques, including Grazing Incidence X-ray diffraction, Fourier Transform Infrared Spectroscopy, X-ray Photoelectron Spectroscopy and Raman spectroscopy. Additionally, Scanning Transmission Electron Microscopy has revealed Ge-enrichment regions surrounding the Sb2Se3 crystals. The composition of the co-evaporated film and final Ge content in the chalcogenide film govern the band gap energy, increasing from 1.41 to 1.83 eV. We present the inaugural operational SLG/Mo/Sb-Ge-Se/CdS/ZnO/ITO photovoltaic devices with a total efficiency of 1.34%. The primary factors limiting the device performance are the significant CdS diffusion into the active layer and the high defect density, as determined by Capacitance-Voltage and Drive-Level Capacitance Profiling. The devices exhibit excellent stability after 1 year of storage in ambient air. These first prototypes of Sb-Ge-Se crystalline thin films pave the way for advancement in the development of sustainable and stable photovoltaic devices.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Growth and Properties of Sb-Ge-Se Thin Films: A Promising Material for Sustainable Photovoltaic Devices Development

  • Bonal, Víctor
  • Khelifi, Samira
  • Djurdjić Mijin, Sanja
  • Galiana, Beatriz
  • Sánchez, Yudania
  • García-Pardo, Marina
  • Arranz, Antonio
  • Ruíz-Marín, Nazaret
  • Lazić, Snežana
  • Serna, Rosalia
  • Caballero, Raquel
14 pages, 13 figures, 4 tables, Sb-Ge chalcogenides are known as effective phase change materials, making them ideal for optical data storage applications, detectors, and sensors. However, there have been no photovoltaic devices developed using these materials to date. In this work, Sb-Ge-Se crystalline thin films with different [Sb]/[Ge] atomic ratios are successfully grown for the first time through the selenization of co-evaporated Sb and Ge layers. The impact of the Se addition and temperature during the selenization process on the composition, structural, morphological, vibrational, and optical properties of the Sb-Ge-Se layers is investigated. The coexistence of Sb<inf>2</inf>Se<inf>3</inf> and GeSe<inf>2</inf> has been confirmed using various characterization techniques, including Grazing Incidence X-ray diffraction, Fourier Transform Infrared Spectroscopy, X-ray Photoelectron Spectroscopy and Raman spectroscopy. Additionally, Scanning Transmission Electron Microscopy has revealed Ge-enrichment regions surrounding the Sb<inf>2</inf>Se<inf>3</inf> crystals. The composition of the co-evaporated film and final Ge content in the chalcogenide film govern the band gap energy, increasing from 1.41 to 1.83 eV. We present the inaugural operational SLG/Mo/Sb-Ge-Se/CdS/ZnO/ITO photovoltaic devices with a total efficiency of 1.34%. The primary factors limiting the device performance are the significant CdS diffusion into the active layer and the high defect density, as determined by Capacitance-Voltage and Drive-Level Capacitance Profiling. The devices exhibit excellent stability after 1 year of storage in ambient air. These first prototypes of Sb-Ge-Se crystalline thin films pave the way for advancement in the development of sustainable and stable photovoltaic devices., This work was supported by ASSESS (TED2021-129666B-C21 and C22) project funded by MCIN/AEI/10.13039/501100011033 and by the “European Union NextGeneration EU/PRTR”. This work was in part supported by the research project InnoPV (PID 2022-140226OB-C3) funded by MICIU/AEI/10.13039/501100011033and by “FEDER/UE”, and by the research project 2DEnLight (PID2020-113415RB-C21) funded by MICIU/AEI/10.13039/501100011033 and by SUNLIFE (PCI2024-155033-2) project funded by MICIU/AEI/10.13039/501100011033/UE. The authors would like to acknowledge the Research Foundation Flanders-Hercules Founda-tion (Belgium) (FWO-Vlaanderen, project No AUGE/13/16:FT-IMAGER). The Raman experiments were performed in the Laboratory for Solid State Physics,headed by Dr. Nenad Lazarevi´c, at the Institute for Physics Belgrade, University of Belgrade, Serbia. B. Galiana is member of the Institute of Chemistry and MaterialsTechnology “ ´Alvaro Alonso Barba” of the UC3M. STEM measurements were partially carried out though an ELECMI-2023 call. We also acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (projectS2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU(FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Investigation of Cd-free Sb2Se3 Thin-Film Solar Cells by ALD-ZnSnO Electron Transport Layer

  • Lázaro-Castrillón, Luna
  • Sánchez, Yudania
  • Payno, David
  • Razi, Umair
  • Bonal, Víctor
  • Cabello, Fátima
  • Galiana, Beatriz
  • Pérez-Rodríguez, Alejandro
  • Merino, José Manuel
  • Caballero, Raquel
4 pages, 5 figures, 1 table . -- 42nd European Photovoltaic Solar Energy Conference and Exhibition , 22-26 September, Bilbao, España, Most of the efficient Sb2Se3-based PV devices use CdS as electron transport layer (ETL) or/and an organic hole transport layer. With the objective of fabricating non-toxic and stable solar cells, we investigate substrate Sb2Se3 thin-film PV devices by the replacement of CdS by Zn1-xSnxO (ZTO) layer without using an organic material in the device structure. In this work, Sb2Se3 thin films have been grown by selenization of evaporated Sb layer onto Mo/SLG substrates. ZTO films are fabricated by atomic layer deposition (ALD) to develop Cd-free solar cells, while the reference CdS layer is deposited by chemical bath. The absorber presents an orthorhombic structure with [hk1] preferred orientation, and a compact structure free of pinholes. The different techniques used for the fabrication of the ETLs show the different CdS and ZTO morphologies, with a conformal growth and uniform surface for the ZTO. ITO/ZnO/CdS/Sb2Se3/Mo/SLG and ITO/ZnO/ZnSnO/Sb2Se3/Mo/SLG solar cells are fabricated. A total efficiency of 4.3 % for the CdS/Sb2Se3 solar cell and of 3.0 % for the Cd-free PV device are obtained. It is revealed that ZTO thickness is a critical parameter to optimize the heterojunction. In this work, 40 nm ZTO layer leads to higher device performances., This work was supported by SUNLIFE (PCI2024 155033-2) project funded by MICIU/AEI/10.13039/501100011033/UE, ASSESS (TED2021-129666B-C21 and TED2021-129666B-C22) project funded by MCIN/AEI/10.13039/501100011033 and by the “European Union Next Generation EU/PRTR” and InnoPV (PID 2022-140226OB-C3) funded by MICIU/AEI/10.13039/501100011033 and by “FEDER/UE”. We also acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimization of Sb2Se3 thin-film solar cells: the role of absorber selenization and the CdS buffer layer

  • Payno, David
  • Sánchez, Yudania
  • Rusu, Marin
  • Lázaro-Castrillón, Luna
  • Khelifi, Samira
  • Galiana, Beatriz
  • Bonal, Víctor
  • Mijin, Sanja Djurdjić
  • Arranz, Antonio
  • Danilson, Mati
  • Lazić, Snežana
  • Grossberg-Kuusk, Maarja
  • Unold, Thomas
  • Serna, Rosalía
  • Merino, José Manuel
  • Caballero, Raquel
18 pages, 10 figures, 3 tables, Sb2Se3 has garnered significant interest as a potential material for photovoltaic (PV) devices, owing to its unique properties. Here, Sb2Se3 thin films are grown by selenization of evaporated Sb layers. The Se content and maximum temperature during the selenization process control the composition of the semiconductor. In all cases, the Sb2Se3 is orientated in the [hk1] direction. The increase of Se temperature results in larger grain size; however, the process temperature must be limited to 340 °C to avoid a significant excess of Se and the formation of holes on the Sb2Se3 surface, which leads to decreased performance of the ITO/ZnO/CdS/Sb2Se3/Mo/SLG device. As determined by surface photovoltage, combined Kelvin probe and photoelectron yield spectroscopy measurements, Sb2Se3 thin films exhibit p-type conductivity with a doping concentration of approximately 4 × 1015 cm−3. Two different buffer layers, CdS1 and CdS2, are studied to form the heterojunction. The use of Na citrate as chemical reagent, along with modified chemical bath conditions for CdS2 deposition, results in enhanced PV performance, increasing the device efficiency from 3.6% to 5.4%. This improvement may be related to the superior optical properties of the CdS2 with higher bandgap energy and lower total reflectance, allowing for a higher carrier collection. The observed Cd diffusion towards the active layer, likely results in the formation of Cdi donors that contribute to a stronger downward band bending at the buffer/absorber interface, reducing interface recombination and enhancing open circuit voltage of the devices. Although the modification of the CdS layer plays a key role in improving the device performance, the efficiency of fabricated devices remains limited by interface recombination. A total area efficiency of 5.5% is achieved by reducing the thickness of Sb2Se3 to 450 nm. This study demonstrates the relevance of optimizing the CdS/Sb2Se3 heterointerface to produce efficient Sb2Se3 PV devices., This work was funded by CETPartnership, the Clean Energy Transition Partnership under the 2023 joint call for research proposals (SUNLIFE, CETP-FP-2023-00137), co-funded by the European Commision (GA N° 10169750) and with the following funding organization (PCI2024-155033-2 funded by MICIU/AEI/10.13039/501100011033/UE and TK210 GREENTECH funded by Estonian Research Council). This work was also supported by ASSESS (TED2021-129666B-C21 and TED2021-129666B-C22) project funded by MCIN/AEI/10.13039/501100011033 and by the ‘European Union Next Generation EU/PRTR’, InnoPV (PID 2022-140226OB-C3) funded by MICIU/AEI/10.13039/501100011033 and by ‘FEDER/UE’ and MAS-PV (ILINK23057) funded by CSIC and RENEW-PV project from COST (European Cooperation in Science and Technology) Action Research and International Networking on Emerging Inorganic Chalcogenides for Photovoltaics (CA21148). Authors would also like to acknowledge projects 2DEnLight (PID2020-113415RB-C21) and LAB (PID2023-150420NB-C33) projects funded by Spanish MICINN, NO-DEPENDENCE (G6037) financed by NATO SPS Programme. The authors would like to acknowledge the Research Foundation Flanders-Hercules Foundation (Belgium) (FWO-Vlaanderen, project No AUGE/13/16:FT-IMAGER). B Galiana is member of the Institute of Chemistry and Materials Technology ‘Álvaro Alonso Barba’ of the UC3M. STEM measurements were partially carried out though an ELECMI-2023 call. We also acknowledge the service from the MiNa Laboratory at IMN-CSIC, and funding from CM (project S2018/NMT-4291 TEC2SPACE), MINECO (project CSIC13-4E-1794) and EU (FEDER, FSE). The Raman experiments were performed in the Laboratory for Solid State Physics, headed by Dr Nenad Lazarević, at the Institute for Physics Belgrade, University of Belgrade, Serbia., Peer reviewed