Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Operation of DR-HVdc-Connected Grid-Forming Wind Turbine Converters Using Robust Loop-Shaping Controllers

  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Sala, Antonio|||0000-0002-5691-8772
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
  • Blanes Campos, Carlos|||0000-0003-1977-7429
[EN] Off-shore wind power plants can be connected to the on-shore grid using diode rectifier HVdc links. As diode rectifiers are passive converters, off-shore WPPs require grid-forming capability. This paper shows how to improve the WTG dynamic response and the voltage and current harmonic rejection by using H-infinity -based controllers. The paper explains how to synthesise three different H-infinity voltage controllers: the first is a single-loop H-infinity controller, the second is a cascaded H(infinity )controller and the third is a proportional-resonant controller that is optimised using H-infinity synthesis. The three H-infinity -based controllers improve the performance and the robustness obtained with a benchmark case PR controller tuned using the root locus technique. All the controllers are designed in continuous time and implemented in discrete time, applying bilinear discretisation with a sampling rate of 0.25 ms. Detailed PSCAD simulations validate the improvement of the performance and robustness, as well as an improvement in the harmonic rejection. The single H(infinity )controller shows the best combined characteristics of all tried controllers, at the expense of losing the separation between voltage and current control loops., Authors would like to acknowledge the support of the Spanish Research Agency through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033 and grant PDC2021-121077-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of non-uniform grid-forming control techniques for the HVDC connection of renewable energy

  • Beneit-Barajas, Adrián
  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Penadés-Huesca, Patricia
[EN] Grid-forming control techniques are required to achieve a high penetration of power electronics- based renewable energy sources for decarbonized electric systems. However, different grid- forming control strategies can operate in the same grid, and grid stability shall be warranted. This paper analyses the use of different grid-forming control strategies for diode rectifier-based wind power plants. The analysed grid-forming controllers are the well-known droop control, an advanced droop control, and the virtual synchronous machine control. The controllers' analysis validates the three grid-forming controllers' interoperability, identifying each control parameter's contribution to the stability of each system state variable. Furthermore, the analysis allows a better tuning of the control parameters. Additionally, a fault-ride-through strategy that improves the system restoration after faults is proposed and validated. The proposed fault-ride-through strategy achieves a soft restoration of the active power., Authors would like to acknowledge the support of the Spanish Research Agency through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033, grant PDC2021-121077-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, grant PRE2021-100779 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future", the support of Generalitat Valenciana through grant CIAICO/2021/340, and grant INVEST/2022/439 funded by Generalitat Valenciana and the European Union Next GenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control of a 15MW off-shore wind turbine for black-start operation

  • Navarro-Martínez, Gala|||0009-0006-5791-768X
  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] Grid forming wind turbines are crucial for achieving a 100% renewable based grid. The mechanical control of the wind turbines is usually designed for maximum power tracking operation. This paper includes the development of a wind turbine pitch controller considering the wider operational range of a grid forming wind turbine. The proposed controller tracks the optimal generation characteristic of the wind turbine when grid connected and is designed to cater for the different power levels when the wind turbine is operated in islanded mode (or grid-connected at partial power). The proposed controller does not require wind speed estimation for its operation and shows better performance than standard pitch controllers during grid-forming operation, particularly, limiting wind turbine speed excursion during block de-loading. Moreover, the proposed controller does not increase the mechanical loads of the key wind turbine elements. The performance of the proposed control is validated in a black start procedure with a full wind farm realistic real-time simulator, including detailed electrical and aeroelastic models of the wind turbine generator, wind farm and connecting HVDC link. Time and frequency domain validation using the real-time model has shown the performance of the proposed controller during black start operation., Authors would like to acknowledge the support of the Spanish Research Agency through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033, Spain, grant PDC2021-121077-I00 funded by MCIN/AEI/10.13039/501100011033, Spain and by the European Union NextGenerationEU/PRTR, the support of Generalitat Valenciana, Spain through grant CIAICO/2021/340, and grant INVEST/2022/439 funded by Generalitat Valenciana, Spain and the European Union Next GenerationEU/PRTR, and the grant FPU22/00791 funded by Ministerio de Ciencia Innovacion e Universidades, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Robust Grid Forming Wind Turbines for Diode Rectifier Based HVDC Link

  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Sala, Antonio|||0000-0002-5691-8772
  • Navarro-Martínez, Gala|||0009-0006-5791-768X
  • Añó Villalba, Salvador Conrado|||0000-0002-8435-5225
  • Bernal-Perez, Soledad|||0000-0002-5431-9792
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] Grid forming wind turbines shall be able to work in different modes of operation. The operating modes that the grid forming wind turbine shall be able to operate are islanding operation, different power transmission levels and fault-ride through. This paper proposes synthesising robust grid forming controllers for the wind turbines of an HVDC Diode Rectifier based Wind Power Plant. The considered grid forming controller is based on a cascade control using Proportional Resonant regulators for the voltage and the current control. The cascade loop is tuned using µ-synthesis to optimise closed-loop robust performance. The validation at the system level has been carried out using a realistic simulation of an HVDC Diode Rectifier-connected Wind Power Plant in a real-time simulator
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Grid forming H control for HVDC diode rectifier-connected wind power plants

  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Sala, Antonio|||0000-0002-5691-8772
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] Grid forming controllers need to operate with a large variation of grid parameters and grid structure, for instance, during black-start operation, connection to HVDC diode rectifiers, etc. This paper proposes a methodology for the synthesis of robust grid forming controllers for HVDC Diode Rectifier based Wind Power Plants using H ¿ control. The different operating modes of a HVDC Diode Rectifier based Wind Power Plant are be considered for the controller synthesis using the proposed H ¿ controller design methodology. The proposed methodology for grid forming controller design improves the performance and robustness of well tuned standard proportional-resonant based controllers. The results have been validated experimentally at the wind turbine level by means of a small power prototype. The validation at the system level has been carried out using a realistic simulation of a HVDC Diode Rectifier-connected Wind Power Plant., Authors would like to acknowledge the support of the Spanish Research Agency through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033 and grant PDC2021-121077-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.