Pasar al contenido principal

CONTROL "GRID FORMING" PARA OPERACION AVANZADA DE SISTEMAS ELECTRICOS CON GRAN PENETRACION DE ENERGIA RENOVABLE

PID2020-112943RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Operation of DR-HVdc-Connected Grid-Forming Wind Turbine Converters Using Robust Loop-Shaping Controllers

  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Sala, Antonio|||0000-0002-5691-8772
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
  • Blanes Campos, Carlos|||0000-0003-1977-7429
[EN] Off-shore wind power plants can be connected to the on-shore grid using diode rectifier HVdc links. As diode rectifiers are passive converters, off-shore WPPs require grid-forming capability. This paper shows how to improve the WTG dynamic response and the voltage and current harmonic rejection by using H-infinity -based controllers. The paper explains how to synthesise three different H-infinity voltage controllers: the first is a single-loop H-infinity controller, the second is a cascaded H(infinity )controller and the third is a proportional-resonant controller that is optimised using H-infinity synthesis. The three H-infinity -based controllers improve the performance and the robustness obtained with a benchmark case PR controller tuned using the root locus technique. All the controllers are designed in continuous time and implemented in discrete time, applying bilinear discretisation with a sampling rate of 0.25 ms. Detailed PSCAD simulations validate the improvement of the performance and robustness, as well as an improvement in the harmonic rejection. The single H(infinity )controller shows the best combined characteristics of all tried controllers, at the expense of losing the separation between voltage and current control loops., Authors would like to acknowledge the support of the Spanish Research Agency through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033 and grant PDC2021-121077-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of non-uniform grid-forming control techniques for the HVDC connection of renewable energy

  • Beneit-Barajas, Adrián
  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Penadés-Huesca, Patricia
[EN] Grid-forming control techniques are required to achieve a high penetration of power electronics- based renewable energy sources for decarbonized electric systems. However, different grid- forming control strategies can operate in the same grid, and grid stability shall be warranted. This paper analyses the use of different grid-forming control strategies for diode rectifier-based wind power plants. The analysed grid-forming controllers are the well-known droop control, an advanced droop control, and the virtual synchronous machine control. The controllers' analysis validates the three grid-forming controllers' interoperability, identifying each control parameter's contribution to the stability of each system state variable. Furthermore, the analysis allows a better tuning of the control parameters. Additionally, a fault-ride-through strategy that improves the system restoration after faults is proposed and validated. The proposed fault-ride-through strategy achieves a soft restoration of the active power., Authors would like to acknowledge the support of the Spanish Research Agency through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033, grant PDC2021-121077-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, grant PRE2021-100779 funded by MCIN/AEI/10.13039/501100011033 and by "ESF Investing in your future", the support of Generalitat Valenciana through grant CIAICO/2021/340, and grant INVEST/2022/439 funded by Generalitat Valenciana and the European Union Next GenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Robust grid forming control for black start operation of diode rectifier based wind power plants

  • Navarro-Martínez, Gala|||0009-0006-5791-768X
  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Sala, Antonio|||0000-0002-5691-8772
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] Black start capability of off-shore wind power plants is an important feature to reduce the number of traditional power plants required for robust system operation. The impedance seen by each wind turbine shows a large variation during the complete black start procedure, normal operation and during faults. This paper proposes a controller design methodology for the voltage control of grid-forming wind turbines based on mu-synthesis optimisation that ensures the stability of the wind power plant during all the considered modes of operation (black start operation, normal operation and faults). The use of mu-synthesis optimisation leads to the optimal controller in terms of robustness and performance for all the impedance variations that occur during the operation of the wind power plant, as is confirmed by the obtained results. The results include Matlab simulations for a limited number of wind turbines and a validation on a real-time co-simulation of a detailed large scale wind power plant, including detailed aeroelastic, mechanical, electric and power electronic models of the complete wind power plant., Authors would like to acknowledge the support of the Spanish Research Agency through Grant TED2021-130120B-C21 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR, Grant PID2020-112943RB-I00, grant PID2023-146747NB-C21 funded by MCIN/AEI/10.13039/501100011033 and by ERDF/EU; and grant FPU22/00791 funded by Ministerio de Ciencia Innovacion y Universidades, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Embedded Real-Time Simulator for Sensorless Control of Modular Multi-Level Converters

  • Tormo, Daniel
  • Vidal-Albalate, Ricardo
  • Idkhajine, Lahoucine
  • Monmasson, Eric
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] This paper suggests the application of an embedded real-time simulator (eRTS) in the context of voltage-sensorless control of a modular multilevel power converter (MMC). This eRTS acts as an observer and ensures digital redundancy in the case of any fault occurring among the capacitor voltage sensors of the MMC submodules. Hence, in such a faulty situation, the MMC controller switches from the measured voltages to their estimated counterparts. As for the digital implementation, to ensure a high level of integration of the overall control system, the Xilinx Zynq7020 system-on-chip field programmable gate array (SoC-FPGA) device was used. The controller was implemented in the hardwired ARM Cortex-A9 processor, with a 100 mu s time step. Regarding the time-sensitive blocks (PWM, eRTS and measurements filtering), a full hardware implementation was privileged, using the FPGA fabric. The execution time of these blocks was 710 ns with a 100 MHz system clock, and the synchronization with the analog to digital acquisition chain was made with a 5 mu s time resolution. The whole proof-of-concept system was experimentally tested, including the time/area evaluation of the implemented designs and the experimental validation of the eRTS estimations in both healthy and faulty scenarios., This work was the result of a collaboration between the SATIE laboratory (CYU-France) involved in the digital implementation of power electronics and motor controllers, and the AI2 laboratory (UPV-Spain) involved in the development of power converters. The authors would like to thank the Spanish Research Agency for their help through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Control of a 15MW off-shore wind turbine for black-start operation

  • Navarro-Martínez, Gala|||0009-0006-5791-768X
  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] Grid forming wind turbines are crucial for achieving a 100% renewable based grid. The mechanical control of the wind turbines is usually designed for maximum power tracking operation. This paper includes the development of a wind turbine pitch controller considering the wider operational range of a grid forming wind turbine. The proposed controller tracks the optimal generation characteristic of the wind turbine when grid connected and is designed to cater for the different power levels when the wind turbine is operated in islanded mode (or grid-connected at partial power). The proposed controller does not require wind speed estimation for its operation and shows better performance than standard pitch controllers during grid-forming operation, particularly, limiting wind turbine speed excursion during block de-loading. Moreover, the proposed controller does not increase the mechanical loads of the key wind turbine elements. The performance of the proposed control is validated in a black start procedure with a full wind farm realistic real-time simulator, including detailed electrical and aeroelastic models of the wind turbine generator, wind farm and connecting HVDC link. Time and frequency domain validation using the real-time model has shown the performance of the proposed controller during black start operation., Authors would like to acknowledge the support of the Spanish Research Agency through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033, Spain, grant PDC2021-121077-I00 funded by MCIN/AEI/10.13039/501100011033, Spain and by the European Union NextGenerationEU/PRTR, the support of Generalitat Valenciana, Spain through grant CIAICO/2021/340, and grant INVEST/2022/439 funded by Generalitat Valenciana, Spain and the European Union Next GenerationEU/PRTR, and the grant FPU22/00791 funded by Ministerio de Ciencia Innovacion e Universidades, Spain.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Contribución de congreso (ConferenceOutput)

Robust Grid Forming Wind Turbines for Diode Rectifier Based HVDC Link

  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Sala, Antonio|||0000-0002-5691-8772
  • Navarro-Martínez, Gala|||0009-0006-5791-768X
  • Añó Villalba, Salvador Conrado|||0000-0002-8435-5225
  • Bernal-Perez, Soledad|||0000-0002-5431-9792
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] Grid forming wind turbines shall be able to work in different modes of operation. The operating modes that the grid forming wind turbine shall be able to operate are islanding operation, different power transmission levels and fault-ride through. This paper proposes synthesising robust grid forming controllers for the wind turbines of an HVDC Diode Rectifier based Wind Power Plant. The considered grid forming controller is based on a cascade control using Proportional Resonant regulators for the voltage and the current control. The cascade loop is tuned using µ-synthesis to optimise closed-loop robust performance. The validation at the system level has been carried out using a realistic simulation of an HVDC Diode Rectifier-connected Wind Power Plant in a real-time simulator
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Grid forming H control for HVDC diode rectifier-connected wind power plants

  • Martínez-Turégano, Jaime|||0000-0002-3483-8253
  • Sala, Antonio|||0000-0002-5691-8772
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] Grid forming controllers need to operate with a large variation of grid parameters and grid structure, for instance, during black-start operation, connection to HVDC diode rectifiers, etc. This paper proposes a methodology for the synthesis of robust grid forming controllers for HVDC Diode Rectifier based Wind Power Plants using H ¿ control. The different operating modes of a HVDC Diode Rectifier based Wind Power Plant are be considered for the controller synthesis using the proposed H ¿ controller design methodology. The proposed methodology for grid forming controller design improves the performance and robustness of well tuned standard proportional-resonant based controllers. The results have been validated experimentally at the wind turbine level by means of a small power prototype. The validation at the system level has been carried out using a realistic simulation of a HVDC Diode Rectifier-connected Wind Power Plant., Authors would like to acknowledge the support of the Spanish Research Agency through grant PID2020-112943RB-I00 funded by MCIN/AEI/10.13039/501100011033 and grant PDC2021-121077-I00 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Comparative Assessment of Modulation Strategies in Modular Multilevel Converters: An Attempt for a Better Compromise Between the Efficiency and Capacitor Voltages&apos, Dispersion

  • Abdayem, Anthony
  • Sawma, Jean
  • Khatounian, Flavia
  • Monmasson, Eric
  • Beneit-Barajas, Adrián
  • Blasco-Gimenez, Ramon|||0000-0003-3427-1581
[EN] Modulation techniques for Modular Multilevel Converters (MMCs) encounter a limit in the tradeoff between reducing the total harmonic distortion (THD) of the load current and minimizing the number of commutations, primarily due to traditional sorting algorithms. This article presents a novel sorting algorithm to address this challenge. This study compares six modulation methods for MMCs: Nearest Level Control (NLC), Integral Modulation (IM), and PWM using a traditional sorting algorithm, alongside their modified versions featuring the novel sorting algorithm. The effectivenss of each modulation technique discussed in this article is verified through experimental tests. The results show that the proposed modulation techniques utilizing the suggested sorting algorithm, effectively decrease the switching number while maintaining the THD of the load currents. However, there is a slight increase in the disparity of the capacitor voltages, which remains controllable. In addition, the study fills a gap in the literature by providing experimental evidence and a theoretical framework demonstrating the superior efficiency of IM over NLC through frequency analysis and experimental results. These findings highlight the potential of the proposed techniques to optimize the MMC performance., This work was supported in part by MCIN/AEI 10.13039/501100011033 under Grant PRE2021-100779, and in part by MCIN/AEI/10.13039/501100011033 "ESF Investing in your future" under Grant PID2020-112943RB-I00.
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A parametric approach for the study of three-phase inverters subject to grid faults

  • Rolán Blanco, Alejandro|||0000-0002-9855-6933
  • Sainz Sapera, Luis|||0000-0002-5670-0669
The aim of this work is to describe the behavior of three-phase inverters connected to a faulty grid by means of a parametric approach which gives rise to limaçon of Pascal curves and 3D figures formed by the injected currents during the fault. The analytical study is given in the complex form of the transformed Park variables, and the simulation results are obtained by means of MATLAB. The results show that the parametric analysis can be an easy and useful tool to predict the behavior of three-phase inverters operating under voltage sags, with the aim of achieving fault ride-through (FRT) capability., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A parametric approach for the study of three-phase inverters subject to grid faults

  • Rolán Blanco, Alejandro
  • Sainz Sapera, Luis
The aim of this work is to describe the behavior of three-phase inverters connected to a faulty grid by means of a parametric approach which gives rise to limaçon of Pascal curves and 3D figures formed by the injected currents during the fault. The analytical study is given in the complex form of the transformed Park variables, and the simulation results are obtained by means of MATLAB. The results show that the parametric analysis can be an easy and useful tool to predict the behavior of three-phase inverters operating under voltage sags, with the aim of achieving fault ride-through (FRT) capability., Objectius de Desenvolupament Sostenible::11 - Ciutats i Comunitats Sostenibles, Objectius de Desenvolupament Sostenible::7 - Energia Assequible i No Contaminant, Postprint (published version)