Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Experimental Evaluation of All-Optical Up- and Down-Conversion of 3GPP 5G NR Signals Using an Optomechanical Crystal Cavity Frequency Comb

  • Fito-Estevan, Vicente
  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Maria Morant|||0000-0001-5565-7788
  • Mercadé, Laura|||0000-0002-4994-7727
  • Roberto Llorente|||0000-0003-4799-2564
  • Martínez, Alejandro|||0000-0001-5448-0140
[EN] Optomechanical crystal cavities (OMCCs) allow the interaction between localized optical and mechanical modes through the radiation-pressure force. Driving such cavities with blue-detuned lasers relative to the optical resonance can induce a phonon lasing regime where the OMCC supports self-sustained mechanical oscillations. This dynamic state results in a narrow and stable microwave tone that modulates the laser at integer multiples of the mechanical resonance frequency, creating an optomechanical (OM) frequency comb suitable for microwave photonics applications. OMCCs enable compact, low-cost power-efficient all-photonic processing of multiple microwave signals, crucial for current and future beyond-5G systems, whilst being compatible with silicon integrated photonic circuits. This work reports the demonstration of all-optical up- and down-conversion of 3GPP 5G new-radio (NR) signals from the low- to mid- and extended-mid bands using the first and second harmonics of the frequency comb generated in a silicon OMCC. The OM comb generates up to 6 harmonics in the K-band, which is suitable for microwave photonic applications. The experimental demonstration also evaluates the impact of the phase-noise and the signal-to-noise ratio (SNR) in the frequency-converted 5G NR signals when the first and second OMCC harmonics are employed for frequency conversion., The work of Vicente Fito and Raul Ortiz were supported under Grant PAID-01-20 UPV and Grant GVACIACIF/2021/006. This work was supported in part by Generalitat Valenciana CIAICO/2021/201 TERAFLEX Project under Grant IDIFEDER/2021/061, in part by Spanish Ministry of Science and Innovation ALLEGRO under Grant PID2021-124618NB-C21, in part by SLOMO under Grant PDC2022-133267-C21, in part by MUSICIAN (CHISTERA IV Cofund 2021), and in part by the European Commission through MAGNIFIC under Grant HORIZON-CL4-2022-RESILIENCE-01-10 101091968.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Phase-noise and stability comparison of fiber-loop and integrated-waveguide coupling in optomechanical crystal oscillators

  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
  • Martínez, Alejandro|||0000-0001-5448-0140
  • Mercadé, Laura|||0000-0002-4994-7727
  • Yang, Xinyan
[EN] Optomechanical crystal cavities (OMCCs) display appealing features to function as on-chip photonic microwave oscillators (PMOs) when operated in the phonon lasing regime. Silicon OMCCs have so far demonstrated the best performance in terms of phase noise in a free-running configuration. Some preliminary experiments have also demonstrated that the generated microwave tone can be used for mixing wireless signals compliant with 5G standards. Still, more research is needed to identify the primary noise sources and determine the path towards improvement. Here, we report experiments on the realization of optomechanical PMOs operating at 4 GHz under two different driving conditions of the cavity: light coupling via a tapered fiber loop versus using an adjacent integrated waveguide illuminated by a lensed fiber. We performed measurements of the phase noise and the frequency stability in time of the detected tone for both cases and observed an improvement when the light is coupled by an adjacent integrated waveguide. This can be explained by the fact that the ambientinduced motion and changes due to perturbations in the refractive index of the medium surrounding the fiber loop result in variations of the coupling, which in turn affect the stability of the PMO. These results emphasize the relevance of a mechanically stable coupling technique when using such optomechanical devices in real applications, which can be of particular importance in environments where large vibrations are expected., The authors acknowledge funding from the Spanish State Research Agency under projects ALLEGRO, MUSICIAN, and SLOMO (Grants No. PID2021-124618NB-C21, PCI2022-135003-2, and No. PDC2022-133267-C21). We also acknowledge support from the European Commission under the project MAGNIFIC (Grant 101091968).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Design, Nonlinear Dynamics, and Applications of Silicon Optomechanical Crystal Cavities for Microwave Integrated Photonics

  • Ortiz-Fernández, Raúl|||0000-0002-4998-0201
[ES] La optomecánica de cavidades estudia la interacción entre la luz y la materia, donde modos ópticos confinados se acoplan a vibraciones mecánicas mediante presión de radiación. Esta interacción permite el diseño de estructuras nanofotónicas en las que campos ópticos resonantes excitan modos mecánicos a frecuencias bien definidas. La tecnología de silicio sobre aislante (SOI) destaca como una plataforma líder debido a su transparencia a longitudes de onda de telecomunicaciones, compatibilidad CMOS y madurez en los procesos de fabricación, lo que la convierte en una opción muy atractiva para dispositivos optomecánicos integrados. Aunque la optomecánica cuántica de cavidades a temperaturas criogénicas ha despertado gran interés para aplicaciones como la transducción cuántica, muchas implementaciones prácticas¿especialmente en telecomunicaciones¿requieren operación a temperatura ambiente y potencias ópticas elevadas. En este régimen semiclasico, las interacciones no lineales permiten fenómenos como el phonon lasing, la conversión de frecuencia y el procesamiento de señales, aportando ventajas en términos de tamaño reducido, eficiencia energética y diseño ligero en comparación con la electrónica convencional, lo que las hace particularmente atractivas para aplicaciones en satélites. En esta tesis nos centramos en este régimen semiclasico no lineal de cavidades optomecánicas de silicio. Por un lado, investigamos teóricamente el dual-phonon lasing y otras dinámicas no lineales en cavidades multimodo donde dos modos mecánicos se acoplan a un modo óptico único. Por otro lado, diseñamos, fabricamos y caracterizamos experimentalmente cavidades cristalinas optomecánicas suspendidas de silicio, demostrando su potencial para aplicaciones en el procesamiento de señales. Al combinar modelado teórico con realizaciones experimentales, este trabajo ofrece un estudio completo de las interacciones optomecánicas multimodo y su papel en el avance de las tecnologías fotónicas para comunicaciones., [CA] L'optomecànica de cavitats estudia la interacció entre la llum i la matèria, on modes òptics confinats s'acoblen a vibracions mecàniques mitjançant pressió de radiació. Aquesta interacció permet el disseny d'estructures nanofotòniques en les quals camps òptics resonants exciten modes mecànics a freqüències ben definides. La tecnologia de silici sobre aïllant (SOI) destaca com una plataforma líder gràcies a la seua transparència a longituds d'ona de telecomunicacions, compatibilitat CMOS i maduresa en els processos de fabricació, el que la converteix en una opció molt atractiva per a dispositius optomecànics integrats. Encara que l'optomecànica quàntica de cavitats a temperatures criogèniques ha despertat gran interés per a aplicacions com la transducció quàntica, moltes implementacions pràctiques¿especialment en telecomunicacions¿requereixen operació a temperatura ambient i potències òptiques elevades. En aquest règim semiclasíc, les interaccions no lineals permeten fenòmens com el phonon lasing, la conversió de freqüència i el processament de senyals, aportant avantatges en termes de mida reduïda, eficiència energètica i disseny lleuger en comparació amb l'electrònica convencional, fet que les fa particularment atractives per a aplicacions en satèl·lits. En aquesta tesi ens centrem en aquest règim semiclasíc no lineal de cavitats optomecàniques de silici. D'una banda, investiguem teòricament el dual-phonon lasing i altres dinàmiques no lineals en cavitats multimode on dos modes mecànics s'acoblen a un mode òptic únic. D'altra banda, dissenyem, fabriquem i caracteritzem experimentalment cavitats cristal·lines optomecàniques suspeses de silici, demostrant el seu potencial per a aplicacions en el processament de senyals. En combinar modelatge teòric amb realitzacions experimentals, aquest treball ofereix un estudi complet de les interaccions optomecàniques multimode i el seu paper en l'avanç de les tecnologies fotòniques per a comunicacions., [EN] Cavity optomechanics explores the interaction between light and matter, where confined optical modes couple to mechanical vibrations through radiation pressure. This interaction enables the design of nanophotonic structures in which resonant light fields drive mechanical modes at well-defined frequencies. Silicon-on-insulator (SOI) technology stands out as a leading platform due to its transparency at telecom wavelengths, CMOS compatibility, and the maturity of its fabrication processes, making it highly attractive for integrated optomechanical devices. While quantum cavity optomechanics at cryogenic temperatures has drawn great attention for applications such as quantum transduction, many practical implementations¿particularly in telecommunications¿require operation at room temperature and high optical powers. In this semiclassical regime, nonlinear interactions allow for phenomena such as phonon lasing, frequency conversion, and signal processing, providing advantages in terms of footprint, power efficiency, and lightweight design compared to conventional electronics, which makes them particularly appealing for satellite applications. In this thesis, we focus on this semiclassical, nonlinear regime of silicon optomechanical cavities. On one hand, we theoretically investigate dual-phonon lasing and other nonlinear dynamics in multimode cavities where two mechanical modes couple to a single optical mode. On the other hand, we design, fabricate, and experimentally characterize suspended silicon optomechanical crystal cavities, demonstrating their potential for signal processing applications. By combining theoretical modeling with experimental realizations, this work provides a comprehensive study of multimode optomechanical interactions and their role in advancing photonic communication technologies., This doctoral research has been supported by both predoctoral grants and research projects. Predoctoral funding was provided by the AYUDAS UPV SUBPROGRAMA 2 fellowship from the Universitat Politècnica de València and the AYUDA PREDOCTORAL GVA-ORTIZ FERNÁNDEZ (Reference: CIACIF/2021/006). Research projects that supported this work include PAID-06-24_GOMEZ GOMEZ (Reference: PAID-06-24), MAGNIFIC (Reference: 101091968), MUSICIAN (Reference: PCI2022-135003-2), ALLEGRO (Reference: PID2021-124618NB-C21), and SLOMO (Reference: PDC2022-133267-C21)