BULERIA. Repositorio Institucional de la Universidad de León
Publicación
Artículo científico (JournalArticle)
Formulation of eco-friendly rendering mortars based on new alternative raw materials: performance and microstructure
[EN] The cement-based construction materials industry needs to adapt its formulations and production
processes to the new paradigm characterized by sustainability, circularity and decarbonization. In
this context, one of the strategies proposed by the prepared mortars industry is to seek new
alternative recycled raw materials derived from industrial by-products. This paper analyses the
feasibility of using mixed recycled sand (0/2 mm) derived from construction and demolition
waste as a 100% replacement for natural sand in the formulation of prepared rendering mortars.
It additionally explores its concurrent use with mixed recycled ultra-fine fractions (< 0.075 mm)
of construction and demolition waste and/or biomass bottom ash collected from power plants.
The by-products were characterized in terms of their physical, chemical and mineralogical
properties. The formulations of the new eco-friendly mortars (Mix O, Mixes A–D) were then
adjusted, and their properties were assessed in their powdered, fresh, and hardened states. The
results indicate that incorporating these new raw materials does not adversely affect their
consistency (162–166 mm) or fresh-state density (634–678 kg/m3
). In addition, the new ecofriendly mortars (Mixes A–D) exhibit greater compressive and flexural strength than the
conventional mortar (Mix O), presenting increases in these values at 90 d ranging from 8.6–
23.7% and 2.4–26.2%, respectively, versus Mix O. The formulated mortars meet the criteria of
category CS I mortar (0.4 MPa ≤ fcm ≤ 2.5 MPa), as per standard EN 998-1. Additionally, the pore
structure of the eco-friendly mortars differs from that of Mix O: the volume of pores with
Ø ≥ 50 µm increases when only CDWm is added and decreases when both mixed recycled sand
and ultra-fine fractions are incorporated. Based on the results obtained, it can be concluded that
all the formulated eco-friendly mortars would, a priori, be suitable for use as prepared rendering
mortars in construction and civil engineering., SI