Pasar al contenido principal

DISEÑO DE MORTERO PARA REHABILITACION ENERGETICA Y CONSTRUCCION EFICIENTE. AUTOSOSTENIBLE, CON CAPACIDADES TERMICAS, ACUSTICAS, CATALIZADORAS DE CO2 Y SENSORIZADO

PID2022-136244OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE EXTREMADURA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

BULERIA. Repositorio Institucional de la Universidad de León
Publicación Artículo científico (JournalArticle)

Formulation of eco-friendly rendering mortars based on new alternative raw materials: performance and microstructure

  • Valoni, N.A.
  • Sáez del Bosque, Isabel F.
  • Medina Martínez, Gabriel
  • Medina Martínez, Carlos
[EN] The cement-based construction materials industry needs to adapt its formulations and production processes to the new paradigm characterized by sustainability, circularity and decarbonization. In this context, one of the strategies proposed by the prepared mortars industry is to seek new alternative recycled raw materials derived from industrial by-products. This paper analyses the feasibility of using mixed recycled sand (0/2 mm) derived from construction and demolition waste as a 100% replacement for natural sand in the formulation of prepared rendering mortars. It additionally explores its concurrent use with mixed recycled ultra-fine fractions (< 0.075 mm) of construction and demolition waste and/or biomass bottom ash collected from power plants. The by-products were characterized in terms of their physical, chemical and mineralogical properties. The formulations of the new eco-friendly mortars (Mix O, Mixes A–D) were then adjusted, and their properties were assessed in their powdered, fresh, and hardened states. The results indicate that incorporating these new raw materials does not adversely affect their consistency (162–166 mm) or fresh-state density (634–678 kg/m3 ). In addition, the new ecofriendly mortars (Mixes A–D) exhibit greater compressive and flexural strength than the conventional mortar (Mix O), presenting increases in these values at 90 d ranging from 8.6– 23.7% and 2.4–26.2%, respectively, versus Mix O. The formulated mortars meet the criteria of category CS I mortar (0.4 MPa ≤ fcm ≤ 2.5 MPa), as per standard EN 998-1. Additionally, the pore structure of the eco-friendly mortars differs from that of Mix O: the volume of pores with Ø ≥ 50 µm increases when only CDWm is added and decreases when both mixed recycled sand and ultra-fine fractions are incorporated. Based on the results obtained, it can be concluded that all the formulated eco-friendly mortars would, a priori, be suitable for use as prepared rendering mortars in construction and civil engineering., SI
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Recycled Eco-Concretes Containing Fine and/or Coarse Concrete Aggregates. Mechanical Performance

  • Plaza, Pablo
  • Sáez del Bosque, Isabel F.
  • Sánchez-Montero, Javier
  • Medina, César
This study analysed the effect of substituting different percentages of natural aggregate with recycled aggregate from concrete crushing, using a coarse fraction as well as a fine fraction. Natural and recycled materials were classified in order to analyse the mechanical performance and impermeability of these eco-concretes in the fresh state as well as in the hardened state. A statistical analysis also determined whether the performance loss was significant from a statistical point of view, finding strength decreases of less than 13% in compressive strength and losses of less than 20% in flexural strength. An increasing trend was found in permeability as the percentage of recycled aggregate in the mix increased., This research was funded by the Spanish Ministry for Science and Innovation under project PDC2022-133285-C21 funded by MCIN/AEI/10.13039/501100011033 and, by the ‘European Union NextGenerationEU/PRTR’, by Spanish Ministry for Science, Innovation and Universities under project PID2022-136244OB-I00 funded MICIU/AEI/10.13039/501100011033 and by “FEDER/UE” and the IB 20131 research project financed by the Consejería de Economía, Ciencia y Agenda Digital de la Junta de Extremadura and by the European Union Regional Development Fund (ERDF). Author Pablo Plaza benefitted from Spanish Ministry of Education, Culture and Sport pre-doctoral grant FPU19/06704., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

New advances in understanding of use of coal bottom ash as an eco-pozzolan: Comparative study with fly ash, its traditional counterpart

  • Sáez del Bosque, Isabel F.
  • Frías, Moisés
  • Medina, Gabriel
  • Medina, César
The sharp decline in coal fly ash (CFA) production due to the ban on coal use in power stations threatens the continued manufacture of fly ash blended cements. This situation has prompted a search for scientifically, technically, economically and environmentally feasible alternatives. Against this backdrop, research is increasingly focusing on coal bottom ash (CBA), a material that has been disposed of in landfill for decades, creating significant technical, environmental, economic and health challenges. This study examines 2 coal ashes (fly ash and bottom ash) produced at the same power station. It conducts chemical, physical, mechanical and microstructural characterization to identify differences between the 2 materials and assess their performance when incorporated into cement matrices at 10–30% replacement volumes. Various standardized techniques and methods (XRF, XRD, laser grading) are employed to analyse the starting ashes, their pozzolanic activity (pozzolan/lime system) and the physical and mechanical behaviour of the resulting blended cements (rheology, calorimetry, mechanical strength and microporosity). Both ashes present similar chemical compositions and meet the requirements for cement and concrete production, according to EN 450–1. Their XRD spectra are also largely comparable and exhibit only minor crystalline differences, the most notable being the presence of anhydrite in the CFA. Between 7 and 28 days of reaction, the CBA demonstrates greater lime fixation capacity than the CFA. No appreciable differences are observed in normal consistency water demand, though in the 30% CBA paste the initial setting time is 60 min faster than in the CFA paste. The compressive strength and microporosity values over time show no significant differences between the two ashes, following the same trend as the reference Portland cement mortar. In summary, CBA emerges as a viable alternative to standardized fly ash since it fulfils the same chemical, physical and mechanical requirements as its CFA counterpart without any adverse effects, according to EN 450–1., This research was financed by the Spanish Ministry for Science, Innovation and Universities under project PID2022–136244OB-I00, through MICIU/AEI/10.13039/501100011033, and by the ERDF/EU. by the Unión Europea, Fondo Europeo de Desarrollo Regional, y la Junta de Extremadura. Autoridad de Gestión. Ministerio de Hacienda. Grant number GR24085 and IB 24056., Peer reviewed