Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Design and Experimental Verification of a Bidirectional EV On-Board Charger Featuring Multiphase Operation in Full Power/Voltage Ranges

  • Sarnago, Héctor
  • Lucía, Óscar
Modern electric vehicles require power electronic systems capable of operating under a wide variety of operating conditions, including on-board chargers (OBCs) and dc–dc converters. These systems must function across a wide range of parameters, such as phase number, input voltage, and output battery voltage. Considering modern design standards, achieving a high-performance implementation featuring high efficiency and low cost is also mandatory, adding additional technical challenges. To address these challenges, this article proposes a novel OBC architecture designed to operate in both three-phase and single-phase configurations across the full output power range. This is achieved without requiring additional power components or degrading performance. As a consequence, the proposed solution is a universal-charging single-power-processing block that features a cost-effective implementation while achieving high power density and efficiency. In this article, a bidirectional 11-kW 800-V-battery-voltage prototype of the system is designed and constructed for a 400-V (line-to-line) mains supply.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A versatile switched-mode large-signal gan-based low-distortion arbitrary waveform generator

  • Álvarez-Gariburo, Ignacio
  • Sarnago, Héctor
  • Burdío, José M.
  • Lucia, Oscar
In a multitude of industrial and biomedical applications, the need for arbitrary waveform generators is essential, serving the purpose of load characterization and excitation, among others. Historically, these generators have had limitations in terms of voltage, current, and frequency output, primarily related with constraints associated with the power devices and circuit topologies. However, notable advancements in semiconductor technology have introduced a new era, enabling the creation of highly versatile waveform generators capable of superior performance, and extended operational capabilities. In this article, a versatile AWG based on switched modules is proposed. In contrast to the previous ones, whose implementation was based on linear amplifiers, it enables arbitrary waveform generation, higher efficiency, and very low output impedance. In addition, it is also presented as a novelty that the voltage in each of the modules is different, following a digital to analog converter (DAC) structure, which allows us to obtain a lower total harmonic distortion (THD) in the output waveform than with conventional methods. The design will take advantage of wide band gap devices to be able to switch in the MHz range to achieve a high bandwidth. Furthermore, in addition to the design and implementation of a high-performance generator, a comparative analysis between the conventional and the proposed DAC-based modulation pattern is performed based on a comparative analysis of the THD and switching losses.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A versatile plasma generation power supply featuring a multilevel converter for arbitrary waveforms generation

  • Álvarez Gariburo, Ignacio Jesús
  • Sarnago, Hector
  • Lucia, Oscar
Purpose Plasma technology has become of great interest in a wide variety of industrial and domestic applications. Moreover, the application of plasma in the domestic field has increased in recent years due to its applications to surface treatment and disinfection. In this context, there is a significant need for versatile power generators able to generate a wide range of output voltage/current ranging from direct current (DC) to tens of kHz in the range of kVs. The purpose of this paper is to develop a highly versatile power converter for plasma generation based on a multilevel topology. Design/methodology/approach This paper proposes a versatile multilevel topology able to generate versatile output waveforms. The followed methodology includes simulation of the proposed architecture, design of the power electronics, control and magnetic elements and test laboratory tests after building an eight-level prototype. Findings The proposed converter has been designed and tested using an experimental prototype. The designed generator is able to operate at 10 kVpp output voltage and 10 kHz, proving the feasibility of the proposed approach. Originality/value The proposed converter enables versatile waveform generation, enabling advanced studies in plasma generation. Unlike previous proposals, the proposed converter features bidirectional operation, allowing to test complex reactive loads. Besides, complex waveforms can be generated, allowing testing complex patterns for optimized cold-plasma generation methods. Besides, unlike transformer- or resonant-network-based approaches, the proposed generator features very low output impedance regardless the operating point, exhibiting improved and reliable performance for different operating conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study on effect of electroporation combining high- and low-frequency harmonics

  • López-Alonso, Borja
  • Polajžer, Tamara
  • Reberšek, Matej
  • Sarnago, Héctor
  • Lucía, Óscar
  • Miklavcic, Damijan
The effects of electroporation are highly influenced by the shape of the applied waveform. This waveform shape can modify the transmitted energy and current flow patterns, impacting the electric field distribution, temperature rise among others. These interactions, along with their synergies with electroporation, are being explored across various industrial and research domains. For instance, in the biomedical field, high-frequency waveforms such as nanosecond pulses offer distinct advantages, while in the food industry, controlled temperature increases combined with electroporation are beneficial. However, in the medical field, the effects of combining high-frequency waveforms (in the MHz range) with low-frequency waveforms (in the kHz range commonly used in clinical electroporation) have not been thoroughly studied, though hypotheses have been proposed regarding their potential effects. In this paper, proof of concept of the effect of the combination of two harmonics is presented using three different strategies to investigate new electroporation protocols. To support this study, a specialized electrical and thermal test bench was developed to control and evaluate the feasibility and potential of possible synergy between high- and low-frequency waveforms to electroporation using an in vitro model.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Cost-Effective Nonresonant Inverter Topology for Domestic Induction Heating

  • Rehm, Felix
  • Sarnago, Héctor
  • Schwendemann, Rüdiger
  • Lucía, Óscar
  • Hiller, Marc
Nonresonant inverter topologies are a reliable, self-protective, and cost-effective solution for induction heating (IH) appliances. In this article, a novel nonresonant inverter topology, particularly suitable for domestic IH applications, is proposed. The proposed topology achieves high output voltage levels, addressing the main drawback of nonresonant topologies compared to resonant ones, which is an increased voltage demand for the same output power. In addition, both switching devices operate against a common ground, enabling a cost-effective implementation with high power density. In this article, the proposed inverter is described, its different operating modes are analyzed, and a power control strategy is derived. A comparison with conventional resonant topologies reveals a potential cost reduction of approximately 13% in the main power electronics components, due to the elimination of resonant capacitors and the possibility of using more cost-effective gate drivers. Experimental results demonstrate that the output power can be seamlessly controlled from zero to 3.6kW, while maintaining zero-voltage switching across a wide operational range. This ensures efficient operation with a maximum estimated efficiency of 98.3%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Induction Heating Appliances: Fifty Years of Technological Success: Paving the Path for Sustainable Homes

  • Guillén, Pablo
  • Sarnago, Héctor
  • Acero, Jesús
  • Burdío, José Miguel
  • Llorente, Sergio
  • Lucía, Óscar
Creating a sustainable future is a transdisciplinary challenge where industrial electronics (IE) plays a key role by providing environmentally friendly solutions to daily processes. Domestic device electrification is a powerful tool for sustainable energy consumption and indoor air quality improvement. In this context, this article covers a relevant example of household appliance electrification with improved energetic performance: domestic induction heating. Domestic IH has now been on the market for 50 years. This article reviews the main historical milestones in electrical cooking appliances, and presents the enabling technologies and advances behind the success of current IH technology. Additionally, recent technological development advancements and future trends are introduced showing the potential of IH to help pave the path to create a sustainable future.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrid-timescale physics-informed neural network for electrical equivalent impedance identification in induction heating systems

  • Lahuerta, Oscar
  • Carretero, Claudio
  • Barragan, Luis Angel
  • Navarro, Denis
  • Acero, Jesus
This article introduces a hybrid variant of a physics-informed neural network (PINN) that is designed to effectively capture both the rapid dynamics of electrical variables and the slower dynamics of state parameters in a domestic induction heating system. By utilizing observable variables, specifically the voltage and current waveforms from the inductor system, the proposed architecture aims to accurately estimate key electrical parameters, i.e., equivalent resistance and inductance, which vary over time due to the nonlinear magnetic properties of the induction load. To assess the performance of the proposed PINN architecture, a comparison with results obtained using an extended Kalman filter was conducted, which serves as a benchmark for this type of task. In addition, the robustness of both approaches was assessed by introducing varying levels of uncertainty in the observable variables. Finally, the effectiveness of both methods was validated through the analysis of experimental measurements collected from a functional prototype.