Pasar al contenido principal

TECNOLOGIAS ELECTRONICAS DE POTENCIA Y ELECTROMAGNETICAS PARA LA TRANSFERENCIA INALAMBRICA DE ENERGIA MEDIANTE ACOPLAMIENTO INDUCTIVO, RESONANTE Y CAPACITIVO

PID2022-136621OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative evaluation of different cables for magnetic couplers in inductive power transfer systems

  • Acero, Jesús
  • Lope, Ignacio
  • Carretero, Claudio
  • Sarnago, Héctor
  • Burdío, José Miguel
Copper litz wires are widely used in wireless charging stations of light-duty electric vehicles. This type of cable is specifically mentioned in the SAE J2954 standard. However, details as the number and diameter of strands, or the material of conductors are not mentioned in the standard, which makes room to address some research and innovations. In this work, several alternatives to the traditional copper-litz wires are analyzed. Specifically, aluminum litz wire, copper-clad aluminum litz wire, and copper tubes are considered as alternatives to standard litz wire for the mentioned application. Potential benefits of the considered alternatives could include weight and cost savings. However, these advantages could not be enough to justify a wiring change if the resistance of the power pads increases and, equivalently, the efficiency of the electromagnetic power transfer decreases. For this reason, a model of the parasitic resistance of windings is proposed by combining the analytical ac resistance of two-layered round strands and finite element simulations. This model is used to obtain a figure of merit related with the efficiency of the electromagnetic energy transfer which is used to compare the different cables. Apart from efficiency, thermal behavior, cost and weight are also considered for comparison purposes. As a result, some conclusions about the suitability of each cable with respect to the operating frequency range are extracted.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

High power density on-board charger featuring power pulsating buffer

  • Sarnago, Héctor
  • Lucía, Oscar
Power electronics plays a key role in electric vehicle technology in areas such as the battery charging and managing, dc distribution and motor drive systems, among others. There are, however, significant challenges to be addressed in terms of cost, performance, reliability and power density. This paper aims at proposing an improved on-board charger architecture taking advantage of a power pulsating buffer topology. The proposed architecture will enable to significantly reduce the dc-link capacitor size, enabling a change in its technology, and leading to a higher power density and higher reliability implementation. The proposed architecture is analyzed, its main design considerations are discussed and, finally, a 3.6-kW experimental prototype is designed and implemented to prove the feasibility of this proposal. As a conclusion, the proposed topology is recommended as a high-performance high-power-density OBC implementation for future EVs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Normalized nonlinear impedance boundary condition in anhysteretic magnetic material for eddy current problems

  • Carretero, Claudio
  • Acero, Jesús
  • Burdio, José M.
Numerical simulations of induction heating systems often assume that the properties of the induction load are linear. Thus, its electrical behavior is described by an equivalent impedance which exhibits frequency dispersion but remains independent of the excitation level. Although deriving such solutions is computationally complex, the use of the impedance boundary condition (IBC) provides high-quality results for linear media. This boundary condition replaces the effects of media with rapidly varying fields by a ratio between their tangential components at the surface. However, in typical induction loads, magnetic saturation of the material causes phenomena of dependence of the properties on the current level. The precise formulation of such an IBC can only be performed considering linear media. This paper proposes calculating a nonlinear excitation level-dependent IBC numerically, considering the saturation dependence of the magnetic properties given by a Langevin function BH-loop. A normalized form of the nonlinear IBC will be obtained from the equation governing this type of behavior, thereby reducing the computational cost of the solution. The usefulness of the proposed nonlinear IBC will be validated by comparing it with results obtained from conventional time domain simulations of a typical induction heating system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Fröhlich model characterization of magnetic properties of the induction heating load

  • Lahuerta, Óscar
  • Ortega, José
  • Carretero, Claudio
  • Martínez, Juan Pablo
  • Acero, Jesús
Purpose: The purpose of this paper is the identification of the magnetic characteristics of the induction load by means of the B–H curve proposed by Fröhlich. Design/methodology/approach: An electromagnetic description of the inductor system is performed to substitute the effects of the induction load, for a mathematical condition, the so-called impedance boundary condition (IBC). Findings: A significant reduction in the computational cost of electromagnetic simulation has been achieved through the use of the IBC, resulting in a computation time approximately 400 times faster than time domain simulation. Moreover, an alternative method has been developed to experimentally identify the parameters that determine the magnetic behavior of the induction load. Finally, further research has been conducted to understand the relationship between the equivalent impedance of an induction load and the excitation current level. Practical implications: This work is performed to achieve a better understanding of the fundamentals involved in the electromagnetic modeling of an induction heating system. Originality/value: This paper introduces the dependence on the excitation level based on a first harmonic approximation and extends the IBC to nonlinear magnetic materials which allows the identification of the magnetic characteristics of the induction load.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A versatile switched-mode large-signal gan-based low-distortion arbitrary waveform generator

  • Álvarez-Gariburo, Ignacio
  • Sarnago, Héctor
  • Burdío, José M.
  • Lucia, Oscar
In a multitude of industrial and biomedical applications, the need for arbitrary waveform generators is essential, serving the purpose of load characterization and excitation, among others. Historically, these generators have had limitations in terms of voltage, current, and frequency output, primarily related with constraints associated with the power devices and circuit topologies. However, notable advancements in semiconductor technology have introduced a new era, enabling the creation of highly versatile waveform generators capable of superior performance, and extended operational capabilities. In this article, a versatile AWG based on switched modules is proposed. In contrast to the previous ones, whose implementation was based on linear amplifiers, it enables arbitrary waveform generation, higher efficiency, and very low output impedance. In addition, it is also presented as a novelty that the voltage in each of the modules is different, following a digital to analog converter (DAC) structure, which allows us to obtain a lower total harmonic distortion (THD) in the output waveform than with conventional methods. The design will take advantage of wide band gap devices to be able to switch in the MHz range to achieve a high bandwidth. Furthermore, in addition to the design and implementation of a high-performance generator, a comparative analysis between the conventional and the proposed DAC-based modulation pattern is performed based on a comparative analysis of the THD and switching losses.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimizing IRE targeting using multi-electrode structure and biomedical multi-output generator

  • López-Alonso, Borja
  • Briz, Pablo
  • Sarnago, Hector
  • Burdio, José M.
  • Lucia, Oscar
Purpose This paper aims to study the feasibility of proposed method to focus the electroporation ablation by mean of multi-output multi-electrode system. Design/methodology/approach The proposed method has been developed based on a previously designed electroporation system, which has the capabilities to modify the electric field distribution in real time, and to estimate the impedance distribution. Taking into consideration the features of the system and biological tissues, the problem has been addressed in three phases: modeling, control system design and simulation testing. In the first phase, a finite element analysis model has been proposed to reproduce the electric field distribution within the hepatic tissue, based on the characteristics of the electroporation system. Then, a control strategy has been proposed with the goal of ensuring complete ablation while minimizing the affected volume of healthy tissue. Finally, to check the feasibility of the proposal, several representative cases have been simulated, and the results have been compared with those obtained by a traditional system. Findings The proposed method achieves the proposed goal, as part of a complex electroporation system designed to improve the targeting, effectiveness and control of electroporation treatments and serve to demonstrate the feasibility of developing new electroporation systems capable of adapting to changes in the preplanning of the treatment in real-time. Originality/value The work presents a thorough study of control method to multi-output multi-electrode electroporation system by mean of a rigorous numerical simulation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A versatile plasma generation power supply featuring a multilevel converter for arbitrary waveforms generation

  • Álvarez Gariburo, Ignacio Jesús
  • Sarnago, Hector
  • Lucia, Oscar
Purpose Plasma technology has become of great interest in a wide variety of industrial and domestic applications. Moreover, the application of plasma in the domestic field has increased in recent years due to its applications to surface treatment and disinfection. In this context, there is a significant need for versatile power generators able to generate a wide range of output voltage/current ranging from direct current (DC) to tens of kHz in the range of kVs. The purpose of this paper is to develop a highly versatile power converter for plasma generation based on a multilevel topology. Design/methodology/approach This paper proposes a versatile multilevel topology able to generate versatile output waveforms. The followed methodology includes simulation of the proposed architecture, design of the power electronics, control and magnetic elements and test laboratory tests after building an eight-level prototype. Findings The proposed converter has been designed and tested using an experimental prototype. The designed generator is able to operate at 10 kVpp output voltage and 10 kHz, proving the feasibility of the proposed approach. Originality/value The proposed converter enables versatile waveform generation, enabling advanced studies in plasma generation. Unlike previous proposals, the proposed converter features bidirectional operation, allowing to test complex reactive loads. Besides, complex waveforms can be generated, allowing testing complex patterns for optimized cold-plasma generation methods. Besides, unlike transformer- or resonant-network-based approaches, the proposed generator features very low output impedance regardless the operating point, exhibiting improved and reliable performance for different operating conditions.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study on effect of electroporation combining high- and low-frequency harmonics

  • López-Alonso, Borja
  • Polajžer, Tamara
  • Reberšek, Matej
  • Sarnago, Héctor
  • Lucía, Óscar
  • Miklavcic, Damijan
The effects of electroporation are highly influenced by the shape of the applied waveform. This waveform shape can modify the transmitted energy and current flow patterns, impacting the electric field distribution, temperature rise among others. These interactions, along with their synergies with electroporation, are being explored across various industrial and research domains. For instance, in the biomedical field, high-frequency waveforms such as nanosecond pulses offer distinct advantages, while in the food industry, controlled temperature increases combined with electroporation are beneficial. However, in the medical field, the effects of combining high-frequency waveforms (in the MHz range) with low-frequency waveforms (in the kHz range commonly used in clinical electroporation) have not been thoroughly studied, though hypotheses have been proposed regarding their potential effects. In this paper, proof of concept of the effect of the combination of two harmonics is presented using three different strategies to investigate new electroporation protocols. To support this study, a specialized electrical and thermal test bench was developed to control and evaluate the feasibility and potential of possible synergy between high- and low-frequency waveforms to electroporation using an in vitro model.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

A Cost-Effective Nonresonant Inverter Topology for Domestic Induction Heating

  • Rehm, Felix
  • Sarnago, Héctor
  • Schwendemann, Rüdiger
  • Lucía, Óscar
  • Hiller, Marc
Nonresonant inverter topologies are a reliable, self-protective, and cost-effective solution for induction heating (IH) appliances. In this article, a novel nonresonant inverter topology, particularly suitable for domestic IH applications, is proposed. The proposed topology achieves high output voltage levels, addressing the main drawback of nonresonant topologies compared to resonant ones, which is an increased voltage demand for the same output power. In addition, both switching devices operate against a common ground, enabling a cost-effective implementation with high power density. In this article, the proposed inverter is described, its different operating modes are analyzed, and a power control strategy is derived. A comparison with conventional resonant topologies reveals a potential cost reduction of approximately 13% in the main power electronics components, due to the elimination of resonant capacitors and the possibility of using more cost-effective gate drivers. Experimental results demonstrate that the output power can be seamlessly controlled from zero to 3.6kW, while maintaining zero-voltage switching across a wide operational range. This ensures efficient operation with a maximum estimated efficiency of 98.3%.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Induction Heating Appliances: Fifty Years of Technological Success: Paving the Path for Sustainable Homes

  • Guillén, Pablo
  • Sarnago, Héctor
  • Acero, Jesús
  • Burdío, José Miguel
  • Llorente, Sergio
  • Lucía, Óscar
Creating a sustainable future is a transdisciplinary challenge where industrial electronics (IE) plays a key role by providing environmentally friendly solutions to daily processes. Domestic device electrification is a powerful tool for sustainable energy consumption and indoor air quality improvement. In this context, this article covers a relevant example of household appliance electrification with improved energetic performance: domestic induction heating. Domestic IH has now been on the market for 50 years. This article reviews the main historical milestones in electrical cooking appliances, and presents the enabling technologies and advances behind the success of current IH technology. Additionally, recent technological development advancements and future trends are introduced showing the potential of IH to help pave the path to create a sustainable future.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hybrid-timescale physics-informed neural network for electrical equivalent impedance identification in induction heating systems

  • Lahuerta, Oscar
  • Carretero, Claudio
  • Barragan, Luis Angel
  • Navarro, Denis
  • Acero, Jesus
This article introduces a hybrid variant of a physics-informed neural network (PINN) that is designed to effectively capture both the rapid dynamics of electrical variables and the slower dynamics of state parameters in a domestic induction heating system. By utilizing observable variables, specifically the voltage and current waveforms from the inductor system, the proposed architecture aims to accurately estimate key electrical parameters, i.e., equivalent resistance and inductance, which vary over time due to the nonlinear magnetic properties of the induction load. To assess the performance of the proposed PINN architecture, a comparison with results obtained using an extended Kalman filter was conducted, which serves as a benchmark for this type of task. In addition, the robustness of both approaches was assessed by introducing varying levels of uncertainty in the observable variables. Finally, the effectiveness of both methods was validated through the analysis of experimental measurements collected from a functional prototype.