Pasar al contenido principal

GENERADORES ELECTRONICOS DE POTENCIA VERSATILES PARA APLICACIONES DE TRANSFERENCIA DE ENERGIA ELECTROMAGNETICA

PID2019-103939RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 39
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

Multifractality in spin glasses

  • Baity-Jesi, Marco
  • Calore, Enrico
  • Cruz, Andrés
  • Fernández Pérez, Luis Antonio
  • Gil-Narvion, Jose Miguel
  • González-Adalid Pemartín, Isidoro
  • Martín Mayor, Víctor
  • Muñoz Sudupe, Antonio
  • Seoane Bartolomé, Beatriz
  • Yllanes, David
We unveil the multifractal behavior of Ising spin glasses in their low-temperature phase. Using the Janus II custom-built supercomputer, the spin-glass correlation function is studied locally. Dramatic fluctuations are found when pairs of sites at the same distance are compared. The scaling of these fluctuations, as the spin-glass coherence length grows with time, is characterized through the computation of the singularity spectrum and its corresponding Legendre transform. A comparatively small number of site pairs controls the average correlation that governs the response to a magnetic field. We explain how this scenario of dramatic fluctuations (at length scales smaller than the coherence length) can be reconciled with the smooth, self-averaging behavior that has long been considered to describe spin-glass dynamics.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Superposition principle and nonlinear response in spin glasses

  • Paga, I.
  • Zhai, Q.
  • Baity-Jesi, M.
  • Calore, E.
  • Cruz, A.
  • Cummings, C.
  • Fernández Pérez, Luis Antonio
  • Gil-Narvion, J. M.
  • González-Adalid Pemartín, Isidoro
  • Gordillo-Guerrero, A.
  • Iñiguez, D.
  • Kenning, G. G.
  • Maiorano, A.
  • Marinari, E.
  • Martín Mayor, Víctor
  • Moreno-Gordo, J.
  • Muñoz Sudupe, Antonio
  • Navarro, D.
  • Orbach, R. L.
  • Parisi, G.
  • Perez-Gaviro, S.
  • Ricci-Tersenghi, F.
  • Ruiz-Lorenzo, J. J.
  • Schifano, S. F.
  • Schlagel, D. L.
  • Seoane Bartolomé, Beatriz
  • Tarancon, A.
  • Yllanes, D.
The extended principle of superposition has been a touchstone of spin-glass dynamics for almost 30 years. The Uppsala group has demonstrated its validity for the metallic spin glass, CuMn, for magnetic fields H up to 10 Oe at the reduced temperature T-r = T/T-g = 0.95, where T-g is the spin-glass condensation temperature. For H > 10 Oe, they observe a departure from linear response which they ascribe to the development of nonlinear dynamics. The thrust of this paper is to develop a microscopic origin for this behavior by focusing on the time development of the spin-glass correlation length, xi (t, t(w); H). Here, t is the time after H changes, and t(w) is the time from the quench for T > T-g to the working temperature T until H changes. We connect the growth of xi (t, t(w); H) to the barrier heights Lambda(t(w)) that set the dynamics. The effect of H on the magnitude of Delta (t(w)) is responsible for affecting differently the two dynamical protocols associated with turning H off (TRM, or thermoremanent magnetization) or on (ZFC, or zero-field-cooled magnetization). This difference is a consequence of nonlinearity based on the effect of H on Delta (t(w)). Superposition is preserved if Delta(t(w)) is linear in the Hamming distance Hd (proportional to the difference between the self-overlap qEA and the overlap q[ Delta(t(w))]). However, superposition is violated if Delta(t(w)) increases faster than linear in Hd. We have previously shown, through experiment and simulation, that the barriers Delta (t(w)) do increase more rapidly than linearly with Hd through the observation that the growth of. (t, t(w); H) slows down as. (t, t(w); H) increases. In this paper, we display the difference between the zero-fieldcooled.ZFC(t, t(w); H) and the thermoremanent magnetization.TRM(t, t(w); H) correlation lengths as H increases, both experimentally and through numerical simulations, corresponding to the violation of the extended principle of superposition in line with the finding of the Uppsala Group.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Analysis and Modeling of the Forces Exerted on the Cookware in Induction Heating Applications

  • Acero, Jesús
  • Lope, Ignacio
  • Carretero, Claudio
  • Burdio, José M.
We present a semianalytical model for calculating the forces exerted on cookware in domestic induction heating applications. The developed model is based on the Maxwell''s stress tensor and is also based on the existing semianalytic expressions of the electromagnetic fields in planar induction heating systems, which are expressed in terms of Fourier-Bessel series. Taking advantage of the axial symmetry of usual domestic induction heating systems, the flux of the vertical component of the Maxwell''s stress tensor is analytically integrated and the vertical force is obtained. The proposed model captures both eddy currents and magnetization that occurs in typical ferromagnetic cookware. The model is verified by means of two-dimensional Finite Element simulations and also is tested by means of measurements of the change of the weight experimented by cookware due to the forces during the heating process.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Scaling Law Describes the Spin-Glass Response in Theory, Experiments, and Simulations

  • Zhai, Q.
  • Paga, I.
  • Baity-Jesi, M.
  • Calore, E.
  • Cruz, A.
  • Fernandez, L.A.
  • Gil-Narvion, J.M.
  • Gonzalez-Adalid Pemartin, I.
  • Gordillo-Guerrero, A.
  • Iñiguez, D.
  • Maiorano, A.
  • Marinari, E.
  • Martin-Mayor, V.
  • Moreno-Gordo, J.
  • Muñoz-Sudupe, A.
  • Navarro, D.
  • Orbach, R.L.
  • Parisi, G.
  • Perez-Gaviro, S.
  • Ricci-Tersenghi, F.
  • Ruiz-Lorenzo, J.J.
  • Schifano, S.F.
  • Schlagel, D.L.
  • Seoane, B.
  • Tarancon, A.
  • Tripiccione, R.
  • Yllanes, D.
The correlation length ?, a key quantity in glassy dynamics, can now be precisely measured for spin glasses both in experiments and in simulations. However, known analysis methods lead to discrepancies either for large external fields or close to the glass temperature. We solve this problem by introducing a scaling law that takes into account both the magnetic field and the time-dependent spin-glass correlation length. The scaling law is successfully tested against experimental measurements in a CuMn single crystal and against large-scale simulations on the Janus II dedicated computer.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

First self-resonant frequency of power inductors based on approximated corrected stray capacitances

  • Lope, I.
  • Carretero, C.
  • Acero, J.
Inductive devices are extensively employed in power electronic systems due to their magnetic energy storage and power transfer capabilities. The current trend is towards increasing the frequency of operation in order to reduce the size of the magnetic components, but the main drawback is that the parasitic capacitance effect can become significant, and degrade the performance of the system. This work analyses the influence of this stray capacitance, and considers how to improve the performance of the device. In general, the impact of the stray capacitance on a magnetic component can be reduced by two methods: reducing the parasitic capacitance between turns of the winding or, alternatively, modifying the arrangement of the connection between turns. To evaluate the last option, an approximated expression of the first self-resonant frequency of the magnetic device is proposed. This gives a rapid assessment of the performance of different devices maintaining the overall equivalent inductance. The proposed expression accounts for the influence of the connection between turns in the bandwidth of the component. Finally, some numerical results are verified with planar coils manufactured on two-layer printed circuit boards.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Vessel Recognition in Induction Heating Appliances - A Deep-Learning Approach

  • Villa, J.
  • Navarro, D.
  • Dominguez, A.
  • Artigas, J.I.
  • Barragan, L.A.
The selection of a vessel by an induction-hob user has a significant impact on the performance of the appliance. Due to the induction heating physical phenomena, there exist many factors that modify the equivalent impedance of induction hobs and, consequently, the operational conditions of the inverter. In particular, the type of vessel, which is a sole decision of the user, strongly affects these parameters. Besides, the ferromagnetic properties of the different materials the vessels are made with, vary differently with the excitation level, and given that most of the domestic induction hobs are based on an ac-bus voltage arrangement, the excitation level continuously varies. The algorithm proposed in this work takes advantage of this fact to identify the equivalent impedance of the load and recognize the pot. This is accomplished through a phase-sensitive detector that was already proposed in the literature and the application of deep learning. Different convolutional neural networks are tested on an augmented experimental-based dataset and the proposed algorithm is implemented in an experimental prototype with a system-on-chip. The proposed implementation is presented as an effective and accurate method to characterize and discriminate between different pots that could enable further functionalities in new generations of induction hobs.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multi-electrode architecture modeling and optimization for homogeneous electroporation of large volumes of tissue

  • López-Alonso, Borja
  • Sarnago, Héctor
  • Burdío, José Miguel
  • Briz, Pablo
  • Lucía, Óscar
Electroporation is a phenomenon that consists of increasing the permeability of the cell membrane by means of high-intensity electric field application. Nowadays, its clinical application to cancer treatment is one of the most relevant branches within the many areas of electroporation. In this area, it is essential to apply homogeneous treatments to achieve complete removal of tumors and avoid relapse. It is necessary to apply an optimized transmembrane potential at each point of the tissue by means of a homogenous electric field application and appropriated electric field orientation. Nevertheless, biological tissues are composed of wide variety, heterogeneous and anisotropic structures and, consequently, predicting the applied electric field distribution is complex. Consequently, by applying the parallel-needle electrodes and single-output generators, homogeneous and predictable treatments are difficult to obtain, often requiring several repositioning/application processes that may leave untreated areas. This paper proposes the use of multi-electrode structure to apply a wide range of electric field vectors to enhance the homogeneity of the treatment. To achieve this aim, a new multi-electrode parallel-plate configuration is proposed to improve the treatment in combination with a multiple-output generator. One method for optimizing the electric field pattern application is studied, and simulation and experimental results are presented and discussed, proving the feasibility of the proposed approach.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Conductance control for electromagnetic-compatible induction heating appliances

  • Villa, Jorge
  • Dominguez, Alberto
  • Barragan, Luis A.
  • Artigas, Jose I.
  • Español, Jorge
  • Navarro, Denis
The design requirements of induction hobs are strongly restricted by efficiency, heating performance, cost, the generation of acoustic noise, and electromagnetic compatibility (EMC). These two latter topics, cost and EMC, motivated the research presented in this article. The different levels at which the equivalent load of the induction hob is excited generate a variation of the equivalent impedance throughout the grid period even if all the other parameters are kept constant. This can cause a nonsinusoidal consumption of the grid current which goes against the compliance with EMC standards. This article proposes an online controller which controls the conductance seen by the inverter by only modifying the switching frequency throughout the bus period. This greatly reduces the harmonic distortion of the grid current, no matter what is the type of the vessel used. Moreover, it requires neither power-factor correction rectifiers nor any additional circuitry and it has a faster dynamic response with respect to the traditional solutions used in induction hobs due to its higher bandwidth.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Temperature chaos is present in off-equilibrium spin-glass dynamics

  • Baity-Jesi M.
  • Calore E.
  • Cruz A.
  • Fernandez L.A.
  • Gil-Narvion J.M.
  • Gonzalez-Adalid Pemartin I.
  • Gordillo-Guerrero A.
  • Iñiguez D.
  • Maiorano A.
  • Marinari E.
  • Martin-Mayor V.
  • Moreno-Gordo J.
  • Muñoz-Sudupe A.
  • Navarro D.
  • Paga I.
  • Parisi G.
  • Perez-Gaviro S.
  • Ricci-Tersenghi F.
  • Ruiz-Lorenzo J.J.
  • Schifano S.F.
  • Seoane B.
  • Tarancon A.
  • Tripiccione R.
  • Yllanes D.
Experiments featuring non-equilibrium glassy dynamics under temperature changes still await interpretation. There is a widespread feeling that temperature chaos (an extreme sensitivity of the glass to temperature changes) should play a major role but, up to now, this phenomenon has been investigated solely under equilibrium conditions. In fact, the very existence of a chaotic effect in the non-equilibrium dynamics is yet to be established. In this article, we tackle this problem through a large simulation of the 3D Edwards-Anderson model, carried out on the Janus II supercomputer. We find a dynamic effect that closely parallels equilibrium temperature chaos. This dynamic temperature-chaos effect is spatially heterogeneous to a large degree and turns out to be controlled by the spin-glass coherence length ¿. Indeed, an emerging length-scale ¿* rules the crossover from weak (at ¿ « ¿*) to strong chaos (¿ » ¿*). Extrapolations of ¿* to relevant experimental conditions are provided.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Induction heating of two magnetically independent loads with a single transmitter

  • Plumed, E.
  • Lope, I.
  • Acero, J.
  • Burdío, J. M.
This article introduces the design of a system capable of heating two magnetically independent ferromagnetic loads placed on different horizontal planes, which uses a combination of induction heating and inductive coupling, called inductively coupled heating. The system uses a single primary inductor acting as a transmitter to transfer power to a secondary inductor attached to the bottom load, which is connected electrically with a third inductor that heats the top load. Since power of the whole system is supplied by a simple half-bridge inverter, the ratio of the delivered power to each of the loads, which is critical for cooking results, is entirely dependent on the system's geometry, coil's number of turns, and compensation capacitors. A finite-element model is used to simulate the magnetic fields generated by inductor currents and calculate the impedance matrix. With the impedance, capacitor values and inductors’ number of turns are selected with the objective of achieving a high power ratio between the top and bottom zones, as well as minimizing stress in the electronics. First, a prototype was built to validate the impedance results in the small-signal regime, and then, the full power regime was used to verify power and current simulations
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

EMI Reduction Via Resonator Coils in Glassless Integrated Domestic Induction Systems

  • Plumed E.
  • Lope Moratilla, I.
  • Acero Acero, J.
This paper explores the magnetic flux emissions of induction heating systems compared with inductively coupled heating systems. Inductively coupled heating uses a resonator coil attached to the ferromagnetic load in order to improve energy transfer from the appliance to the load. The magnetic flux emissions of both kinds of systems are simulated, and their dependence on coil current and turn number is outlined. The paper focuses on emitted near field, whose measurement and limits are determined by norm. Several prototypes are developed and tested to verify the simulations
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Power factor correction stage and matrix zero voltage switching resonant inverter for domestic induction heating appliances

  • Pérez-Tarragona, Mario
  • Sarnago, Héctor
  • Lucía, Óscar
  • Burdío, José M.
The technology of flexible cooking surfaces applied to domestic induction heating (IH) appliances offers several advantages that improve the experience of the users, not only because the safety or cleanness, but also due to the fast heating and flexibility. These cooktops have more challenging design requirements because of different mains connections, efficiency requirements, electromagnetic compatibility (EMC) standards, control complexity, and cost. In previous works, the use of a front-end power factor corrector (PFC) rectifier has been proposed to overcome these restrictions. In order to get a cost-effective implementation, this paper proposes the use of a front-end PFC stage and a matrix resonant inverter, which features zero voltage switching (ZVS), to achieve a reduced number of power devices, and get a high performance and reduced power losses in the converter. Finally, an experimental prototype with four outputs of 3.6 kW has been implemented to prove the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Domestic induction heating system with standard primary inductor for reduced-size and high distance cookware

  • Plumed, Emilio
  • Lope, Ignacio
  • Acero, Jesús
  • Burdío, José Miguel
In this work, a hybrid wireless power transfer system which combines induction heating (IH) and inductive power transfer (IPT) functionalities is proposed to improve the performance of a domestic induction heating application with small loads weakly coupled to distant inductors. Considering the basic single-inductor domestic IH application, the addition of a secondary inductor with series compensation capacitor directly attached to the small ferromagnetic cookware. This inductor allows to adapt the primary inductor to the load size, extending load distance while avoiding increased power losses and stress in electronic components. The extended distance can be used to implement the glassless induction concept, where the ceramic glass of typical cooktops is substituted by the kitchen surface itself. The design of the secondary coil is carried out by means of a combination of Finite Element simulations and electrical simulations. A design process including the housing of the resonant capacitors and the selection of the secondary winding number of turns and cabling is presented. As a result, a prototype is implemented and tested under working conditions up to 1500 W at several distances. Experimental results validate the electrical modelling and simulation. Moreover, thermal results confirm the feasibility of the proposal and validate the adopted strategies for the capacitor housing. IEEE
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Liver tissue remodeling following ablation with irreversible electroporation in a porcine model

  • Monleón, E.
  • Lucía, Ó.
  • Güemes, A.
  • López-Alonso, B.
  • Arribas, D.
  • Sarnago, H.
  • Hernáez, A.
  • Burdío, J. M.
  • Junquera, C.
Irreversible electroporation (IRE) is a method of non-thermal focal tissue ablation characterized by irreversibly permeabilizing the cell membranes while preserving the extracellular matrix. This study aimed to investigate tissue remodeling after IRE in a porcine model, especially focusing on the extracellular matrix and hepatic stellate cells. IRE ablation was performed on 11 female pigs at 2,000 V/cm electric field strength using a versatile high-voltage generator and 3 cm diameter parallel-plate electrodes. The treated lobes were removed during surgery at 1, 3, 7, 14, and 21 days after IRE. Tissue remodeling and regeneration were assessed by histopathology and immunohistochemistry. Throughout the treated area, IRE led to extensive necrosis with intact collagenous structures evident until day 1. From then on, the necrosis progressively diminished while reparative tissue gradually increased. During this process, the reticulin framework and the septal fibrillar collagen remained in the necrotic foci until they were invaded by the reparative tissue. The reparative tissue was characterized by a massive proliferation of myofibroblast-like cells accompanied by a complete disorganization of the extracellular matrix with the disappearance of hepatic architecture. Hepatic stellate cell markers were associated with the proliferation of myofibroblast-like cells and the reorganization of the extracellular matrix. Between 2 and 3 weeks after IRE, the lobular architecture was almost completely regenerated. The events described in the present study show that IRE may be a valid model to study the mechanisms underlying liver regeneration after extensive acute injury.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Self-adaptive overtemperature protection materials for safety-centric domestic induction heating applications

  • Pascual, A.
  • Acero, J.
  • Llorente, S.
  • Carretero, C.
  • Burdio, J. M.
Security aspects in the household sphere have become a major concern in modern societies. In particular, regardless of the technology used, users increasingly appreciate a protection system to prevent material damage in the case of human errors or distractions during the cooking process. This paper presents a sensorless method for detecting and limiting overtemperature, unique to induction cooktops, based on their specific features, such as automatic pot detection and load power factor estimation. The protection system exploits the change in the load material properties at certain temperatures, the effect of which may be enhanced by arranging a multilayer structure comprising a low Curie temperature alloy and an aluminum layer. The proposed multilayer load exhibits two differentiated states: a normal state, where the cookware is efficiently heated, and a protection state, above the safety temperature, where the power factor abruptly decreases, limiting the overheating and making the state easily detectable by the cooktop. This method of overtemperature self-protection uses the electronics of conventional induction cooktops; therefore, no other sensors or systems are required, reducing its complexity and costs. Simulation and experimental results are provided for several cookware designs, thereby proving the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

L2C2: Last-level compressed-contents non-volatile cache and a procedure to forecast performance and lifetime

  • Escuin, Carlos
  • Ibáñez, Pablo
  • Navarro, Denis
  • Monreal, Teresa
  • Llabería, José M.
  • Viñals, Víctor
Several emerging non-volatile (NV) memory technologies are rising as interesting alternatives to build the Last-Level Cache (LLC). Their advantages, compared to SRAM memory, are higher density and lower static power, but write operations wear out the bitcells to the point of eventually losing their storage capacity. In this context, this paper presents a novel LLC organization designed to extend the lifetime of the NV data array and a procedure to forecast in detail the capacity and performance of such an NV-LLC over its lifetime. From a methodological point of view, although different approaches are used in the literature to analyze the degradation of an NV-LLC, none of them allows to study in detail its temporal evolution. In this sense, this work proposes a forecasting procedure that combines detailed simulation and prediction, allowing an accurate analysis of the impact of different cache control policies and mechanisms (replacement, wear-leveling, compression, etc.) on the temporal evolution of the indices of interest, such as the effective capacity of the NV-LLC or the system IPC. We also introduce L2C2, a LLC design intended for implementation in NV memory technology that combines fault tolerance, compression, and internal write wear leveling for the first time. Compression is not used to store more blocks and increase the hit rate, but to reduce the write rate and increase the lifetime during which the cache supports near-peak performance. In addition, to support byte loss without performance drop, L2C2 inherently allows N redundant bytes to be added to each cache entry. Thus, L2C2+N, the endurance-scaled version of L2C2, allows balancing the cost of redundant capacity with the benefit of longer lifetime. For instance, as a use case, we have implemented the L2C2 cache with STT-RAM technology. It has affordable hardware overheads compared to that of a baseline NV-LLC without compression in terms of area, latency and energy consumption, and increases up to 6-37 times the time in which 50% of the effective capacity is degraded, depending on the variability in the manufacturing process. Compared to L2C2, L2C2+6 which adds 6 bytes of redundant capacity per entry, that means 9.1% of storage overhead, can increase up to 1.4-4.3 times the time in which the system gets its initial peak performance degraded.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Printed circuit board coils of multi-track litz structure for 3.3 kW inductive power transfer system

  • Narvaez, Alexis
  • Carretero, Claudio
  • Lope, Ignacio
  • Acero, Jesús
This paper presents the optimization procedure of an inductive power transmission (IPT) system which utilizes large size spiral printed circuit board (PCB) coils for high- power transfer. Printed circuit boards for coil assembly provides advantages in the manufacturing process through the use of cost- effective flexible fabrication techniques. Furthermore, this kind of construction offers a low profile device, which is of great interest for applications with space constraints. PCB-based IPT system coils can achieve high energy efficiency by applying litz-structure braiding techniques, as investigated in this work, where the objective was to obtain an optimized balance between the conduc- tion losses and proximity losses associated with the number and dimensions of the traces. Considering the geometrical dimensions and manufacturing constraints, we will proceed to obtain the characteristics of the coil to achieve optimal performance. The estimation of coil losses were in part based on finite element simulations, and the results were conveniently processed with the appropriate mathematical methods. Numerical simulation and experimental results were conducted for validation on a prototype suitable to transfer up to 3.3 kW for a transmitter- receiver distance of 10 cm. In the experimental arrangement, a maximum efficiency in the coils of 93% has been measured, and the overall efficiency of 88% has been reached for the entire IPT system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Small-sized immersible water heaters for domestic induction heating technology

  • Pascual, Alberto
  • Acero, jesús
  • Llorente, Sergio
  • Carretero, Claudio
  • Burdio, José M.
Induction cooktops are a key element in home electrification. This paper presents a new use of induction cooktops, which allows the preparation of infusions directly in a ceramic mug. It is proposed the design of a water heater with an immersible metallic load. The dimensions of the load allow its embedding in small ceramic vessels. Despite being smaller than conventional inductors, the immersible load has a specific shape that allows it to efficiently receive the energy from the induction cooktops and quickly heat the liquid inside the mug. Its geometry consists of a flat disk with sidewalls on its edge, which provides low reluctance paths for the magnetic field, resulting in improved transmitted power and efficiency. The load is arranged in a multilayer structure consisting of a ferromagnetic alloy with low Curie temperature at the bottom and aluminum on the top, which confers self-detection capabilities against dangerous overheating. The study of the proposal has been carried out with a finite element analysis model, and the feasibility of this proposal has been demonstrated through experimental results of its performance. Finally, the immersible water heater, powered by an induction cooktop, has been compared to other liquid heating systems, such as the microwave and the kettle, with promising results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tumor location on electroporation therapies by means of multi-electrode structures and machine learning

  • Briz, P.
  • López-Alonso, B.
  • Sarnago, H.
  • Burdío, J.M.
  • Lucía, O.
Electroporation is a phenomenon produced in the cell membrane when it is exposed to high pulsed electric fields that increases its permeability. Among other application fields, this phenomenon can be exploited in a clinical environment for tumor ablation therapies. In this context to achieve optimum results, it is convenient to focus the treatment on the tumor tissue to minimize side effects. In this work, a pre-treatment tumor location method is developed, with the purpose of being able to precisely target the therapy. This is done by taking different impedance measurements with a multi-output electroporation generator in conjunction with a multi-electrode structure. Data are processed by means of a vector of independent artificial neural networks, trained and tested with simulation data, and validated with phantom gels. This algorithm proved to provide suitable accuracy in spite of the low electrode count compared to the number of electrodes of a standard electrical impedance tomography device.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electromagnetic modeling and analysis of multimaterial cookware for domestic induction heating

  • Pascual, Alberto
  • Acero, Jesús
  • Carretero, Claudio
  • Llorente, Sergio
  • Burdio, José M.
The performance of induction cooktops (inductor and electronic power converter) is closely related to the inductive properties of the cookware used. Traditionally, they are designed to work optimally with fully ferromagnetic cookware. However, multimaterial cookware with a bottom surface composed of a ferromagnetic material and small pieces of aluminum are nowadays more commonly used. Designing cooktops to also work optimally with this cookwares requires identifying the equivalent parameters, Req and Leq, obtained from the electromagnetic models of the inductor-load system. Modeling multimaterial cookware, with a large number of inserts, complicates the model design and increases its computational cost. This work presents an equivalent model for multimaterial loads that allows the evaluation of the inductor performance and obtaining the equivalent parameters quickly and accurately. The multimaterial cookware is modeled as a disk of uniform material with equivalent electromagnetic properties, µr,eq and σeq, which depend on the properties of each material and the proportion of area they occupy. The equivalent model has been validated by electromagnetic simulation using a FEA tool and by experimental results. Finally, based on the results obtained, an analysis has been carried out to evaluate the importance of design factors such as the choice of the cookware base material and the size, arrangement, and number of inserts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Multi-Output Resonant Power Converters for Domestic Induction Heating

  • Guillen, P.
  • Sarnago, H.
  • Lucia, O.
  • Burdio, J.M.
Induction heating has become the most relevant domestic heating technology due to its accurate power control, clean operation and high efficiency. Current design tendencies aim to reduce limitations in pot positioning to increase the cooktop versatility and to improve the user experience. These desired flexible surfaces are implemented by means of multi-coil structures which require the design of new multi-output power converters. This paper reviews and classifies the different inverters proposed in the literature to power multi-coil structures, and analyzes them in terms of versatility, performance, and component count.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Series-Resonant Matrix Inverter with Asymmetrical Modulation for Improved Power Factor Correction in Flexible Induction Heating Appliances

  • Guillen, P.
  • Sarnago, H.
  • Lucia, O.
  • Burdio, J.M.
Induction heating appliance operation is constrained by the nonlinear pot material behavior under the generated magnetic field. The equivalent load seen by the inverter varies with the intensity of the field, meaning that this variation is dependent on the mains voltage. In flexible-surface induction cooktops, this fact is combined with a high coil number and different pots to be powered simultaneously, increasing the complexity to control the transmitted power while maintaining proper mains current consumption. In this article, two noncomplementary asymmetrical modulations with in-cycle parameter variation are proposed for improved power factor correction while avoiding the need for switching frequency variation and intermodulation noise in multiload systems. The proposed strategies are analyzed and experimentally tested using a 3.6 kW multi-inverter prototype featuring five induction coils.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

GaN-based matrix resonant power converter for domestic induction heating

  • Guillen, P.
  • Sarnago, H.
  • Lucía, O.
  • Burdio, J. M.
Flexible-surface induction cooktops must operate with a variety of induction heating loads with different behavior and power setpoints to be heated simultaneously. In this context, multi-output inverter topologies aim at achieving independent power management while featuring low power-device count and high power density. However, they suffer from limitations when applying classical modulation strategies to ensure soft switching, which is required to reduce transistor losses and achieve efficient operation. In this scenario, wide band-gap devices reduce switching losses, opening a new paradigm in power conversion where soft switching is not mandatory in order to achieve high efficiency. This paper proposes an implementation of a multi-output resonant inverter based on GaN HEMTs and evaluates various modulation strategies in terms of efficiency under different switching modes. The proposed approach is designed and experimentally validated by means of a 2-coil 2000 W prototype implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Printed circuit board coil design with reduced series resistance for high power inductive wireless power transmission systems

  • Narvaez, A. A.
  • Carretero, C.
  • Acero, J.
  • Burdío, J. M.
Due to the growing use of the popular wireless power transmission (WPT) technology, an innovative method of coil design and optimization is presented in this paper. This method has been applied to develop spiral printed circuit board (PCB) coils with litz-wire structure. From the geometry definition, the design process is carried out by means of finite element analysis (FEA). In addition, as a complement to the design process, some prototypes of spiral PCB coils were built to contrast the simulation results and experimental measurements by means of the small-signal characterization, which reflects the success of the applied method.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electroporation pulse generator for biomedical applications with improved output voltage ripple and reduced bus capacitor

  • Sarnago, H.
  • Burdio, J. M.
  • Lucia, Ó.
Electroporation is a promising cancer treatment based on applying short electric field pulses. In this context, highly versatile pulse generators are required to generate high-voltage low-ripple pulses in the µs range. In the past, several multi-level converters have been proposed to achieve this aim. Achieving constant output voltage and, consequently, electric field is essential to obtain predictable treatments and minimize the risks of tumor relapse. However, significant bus capacitance is required to achieve the required performance, leading to bulky equipment with serious safety implications due to the stored energy. In this letter, a high-performance pulse generator for electroporation is proposed that takes advantage of a multi-level structure with linear voltage regulation to achieve the desired performance with reduced bus capacitance. The proposed converter has been designed and tested experimentally during both laboratory and operation room treatments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Coupling between cavity resonances and characteristic modes on household appliances

  • Labodía, Miguel
  • Español, Jorge
  • Tesa, Jorge
  • Mediano, Arturo
Home appliances generally comprise a mechanical envelope, or enclosure, of electrically conductive material (steel, aluminum, etc.) that houses electrical and electronic circuits. That envelope typically includes all kind of apertures, openings, holes, slots, windows, etc., to connect—physically and electromagnetically—the external space with its internal space. The performance of that envelope is a key element to comply with surface current EMI/EMC (Electro-Magnetic Interference/Electro-Magnetic Compatibility) regulations for electromagnetic interference, both emissions and immunity. Here, we present a novel theoretical proposal that consists of establishing the mathematical relationship of the coupling between the resonant modes of an internal cavity (RMs) contained in a conductive body and the characteristic modes (CMs) on the external surface of its envelope through the openings that connect those external and internal spaces, and doing so by means of equivalent virtual surface currents located in those openings. The comparative results of simulations and actual measurements of immunity in an anechoic chamber (measurements originally oriented to other purposes) are presented as above-mentioned evidence of resonating modes coupling on the frequency range 40–1000 MHz. However, this theoretical proposal is novel and remains to be developed in greater depth and detail in future works.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Induction Heating Adaptation of a Different-Sized Load with Matching Secondary Inductor to Achieve Uniform Heating and Enhance Vertical Displacement

  • Plumed, Emilio
  • Lope, Ignacio
  • Acero, Jesús
This article presents an inductively coupled heating application, that is, a combination of wireless power transfer and induction heating. The addition of a secondary inductor with a resonant capacitor directly beneath and attached to the ferromagnetic load allows us to improve induction heating adaptation of loads of different sizes to the primary inductor, enhancing power distribution and extending load distance while avoiding increased power losses and stress on electronic components. The extended distance can be used to implement the seamless induction concept, where the typical ceramic glass is substituted by the kitchen surface itself. Finite-element analysis simulations are carried out to determine the suitability of each possible design, and a scoring system is applied to determine the optimal solution, bearing in mind the delivered power, power factor, power distribution, and efficiency. A near optimal design is chosen to develop as a prototype. The prototype is tested under working conditions up to 3680 W at several distances, validating the simulations'' impedance parameters and verifying power distribution with a water boiling test and a dry test with a thermographic camera.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multifractality in spin glasses

  • Baity-Jesi, Marco
  • Calore, Enrico
  • Cruz, Andrés
  • Fernández, Luis Antonio
  • Gil-Narvión, José Miguel
  • González-Adalid Pemartín, Isidoro
  • Gordillo-Guerrero, Antonio
  • Íñiguez, David
  • Maiorano, Andrea
  • Marinari, Enzo
  • Martín-Mayor, Víctor
  • Moreno-Gordo, Javier
  • Muñoz Sudupe, Antonio
  • Navarro, Denis
  • Paga, Ilaria
  • Parisi, Giorgio
  • Pérez-Gaviro, Sergio
  • Ricci-Tersenghi, Federico
  • Ruiz-Lorenzo, Juan Jesús
  • Schifano, Sebastiano Fabio
  • Seoane, Beatriz
  • Tarancón, Alfonso
  • Yllanes, David
We unveil the multifractal behavior of Ising spin glasses in their low-temperature phase. Using the Janus II custom-built supercomputer, the spin-glass correlation function is studied locally. Dramatic fluctuations are found when pairs of sites at the same distance are compared. The scaling of these fluctuations, as the spin-glass coherence length grows with time, is characterized through the computation of the singularity spectrum and its corresponding Legendre transform. A comparatively small number of site pairs controls the average correlation that governs the response to a magnetic field. We explain how this scenario of dramatic fluctuations (at length scales smaller than the coherence length) can be reconciled with the smooth, self-averaging behavior that has long been considered to describe spin-glass dynamics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative evaluation of different cables for magnetic couplers in inductive power transfer systems

  • Acero, Jesús
  • Lope, Ignacio
  • Carretero, Claudio
  • Sarnago, Héctor
  • Burdío, José Miguel
Copper litz wires are widely used in wireless charging stations of light-duty electric vehicles. This type of cable is specifically mentioned in the SAE J2954 standard. However, details as the number and diameter of strands, or the material of conductors are not mentioned in the standard, which makes room to address some research and innovations. In this work, several alternatives to the traditional copper-litz wires are analyzed. Specifically, aluminum litz wire, copper-clad aluminum litz wire, and copper tubes are considered as alternatives to standard litz wire for the mentioned application. Potential benefits of the considered alternatives could include weight and cost savings. However, these advantages could not be enough to justify a wiring change if the resistance of the power pads increases and, equivalently, the efficiency of the electromagnetic power transfer decreases. For this reason, a model of the parasitic resistance of windings is proposed by combining the analytical ac resistance of two-layered round strands and finite element simulations. This model is used to obtain a figure of merit related with the efficiency of the electromagnetic energy transfer which is used to compare the different cables. Apart from efficiency, thermal behavior, cost and weight are also considered for comparison purposes. As a result, some conclusions about the suitability of each cable with respect to the operating frequency range are extracted.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Multi-Phase PFC Rectifier and Modulation Strategies for Domestic Induction Heating Applications

  • Pérez-Tarragona, Mario
  • Sarnago, Héctor
  • Lucía, Óscar
  • Burdío, José M.
Domestic induction heating appliances have improved the final user experience due to the advantages that this technology offers, such as flexibility, fast heating, cleanness and safety. Currently, these appliances are implemented using several isolated electronic boards to be able to be powered from one or several mains phases, enabling its use in regions with different connections. In order to enhance this approach, a multi-phase Power Factor Correction (PFC) rectifier is proposed, improving significantly induction heating cookers. The topology is described, and a wide variety of modulation strategies are presented and analyzed, discussing their main advantages and disadvantages according to the conduction mode, operating frequency, switching mode, and control strategy. In order to validate this proposal, a 11-kW and up-to-3-phase high power-density converter for domestic IH applications is implemented and experimentally analyzed, including its main waveforms and efficiency. Finally, a comparative evaluation is performed to enable the selection of the optimum modulation strategy for each specific application.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Constant-current gate driver for GaN HEMts applied to resonant power conversion

  • Sarnago H.
  • Lucía Ó.
  • Popa I.O.
  • Burdío J.M.
New semiconductor technology is enabling the design of more reliable and high-performance power converters. In particular, wide bandgap (WBG) silicon carbide (SiC) and gallium nitride (GaN) technologies provide faster switching times, higher operating temperature, and higher blocking voltage. Recently, high-voltage GaN devices have opened the design window to new applications with high performance and cost-effective implementation. However, one of the main drawbacks is that these devices require accurate base current control to ensure safe and efficient operation. As a consequence, the base drive circuit becomes more complex and the final efficiency is decreased. This paper presents an improved gate driver circuit for GaN devices based on the use of a constant current regulator (CCR). The proposed circuit achieves constant current regardless of the operating conditions, solving variations with temperature, aging and operating conditions that may degrade the converter performance. Besides, the proposed circuit is reliable and cost-effective, being applicable to a wide range of commercial, industrial and automotive applications. In this paper, its application to a zero-voltage switching resonant inverter for domestic induction heating was performed to prove the feasibility of this concept. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dual-Output Extended-Power-Range Quasi-Resonant Inverter for Induction Heating Appliances

  • Sarnago, Hector
  • Burdio, Jose M.
  • Lucia, Oscar
Induction heating technology provides efficient and reliable heating processes that outperform other classical heating methods based on fossil fuels or resistive heating. Among its many industrial, domestic, and biomedical applications, domestic induction heating appliances are a popular choice due to these advantages. This technology requires high-performance and cost-effective inverters that take most of the power devices and the converter topology. Depending upon the desired performance and output-power range, different power converters are employed. However, currently, most platforms rely on the well-known series resonant half-bridge topology. Single-switch topologies offer a cost-effective implementation but are limited to the low-cost low-performance markets due to their limitations in terms of output power and power control. In this context, this paper proposes a high-performance dual-output quasi-resonant inverter for modern induction heating appliances. Unlike state-of-the-art proposals, this converter achieves a full-output-power operating range of up to 3.6 kW. Consequently, it provides a high-performance cost-effective alternative to current implementations. The proposed converter is analyzed in this paper and experimentally verified using a dual-output 3.6-kW induction heating appliance prototype.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Normalized nonlinear impedance boundary condition in anhysteretic magnetic material for eddy current problems

  • Carretero, Claudio
  • Acero, Jesús
  • Burdio, José M.
Numerical simulations of induction heating systems often assume that the properties of the induction load are linear. Thus, its electrical behavior is described by an equivalent impedance which exhibits frequency dispersion but remains independent of the excitation level. Although deriving such solutions is computationally complex, the use of the impedance boundary condition (IBC) provides high-quality results for linear media. This boundary condition replaces the effects of media with rapidly varying fields by a ratio between their tangential components at the surface. However, in typical induction loads, magnetic saturation of the material causes phenomena of dependence of the properties on the current level. The precise formulation of such an IBC can only be performed considering linear media. This paper proposes calculating a nonlinear excitation level-dependent IBC numerically, considering the saturation dependence of the magnetic properties given by a Langevin function BH-loop. A normalized form of the nonlinear IBC will be obtained from the equation governing this type of behavior, thereby reducing the computational cost of the solution. The usefulness of the proposed nonlinear IBC will be validated by comparing it with results obtained from conventional time domain simulations of a typical induction heating system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Spin-glass dynamics in the presence of a magnetic field: exploration of microscopic properties

  • Paga, I.
  • Zhai, Q.
  • Baity-Jesi, M.
  • Calore, E.
  • Cruz, A.
  • Fernández, L. A.
  • Gil-Narvion, J. M.
  • González-Adalid Pemartin, I.
  • Gordillo Guerrero, A.
  • Iñiguez, D.
  • Maiorano, A.
  • Marinari, E.
  • Martin-Mayor, V.
  • Moreno-Gordo, J.
  • Muñoz-Sudupe, A.
  • Navarro, D.
  • Orbach, R. L.
  • Parisi, G.
  • Pérez-Gaviro, S.
  • Ricci-Tersenghi, F.
  • Ruiz Lorenzo, J. J.
  • Schifano, S. F.
  • Schlagel, D. L.
  • Seoane, B.
  • Tarancón, A.
  • Tripiccione, R.
  • Yllanes, D.
The synergy between experiment, theory, and simulations enables a microscopic analysis of spin-glass dynamics in a magnetic field in the vicinity of and below the spin-glass transition temperature T g. The spin-glass correlation length, ¿(t, t w; T), is analysed both in experiments and in simulations in terms of the waiting time t w after the spin glass has been cooled down to a stabilised measuring temperature T < T g and of the time t after the magnetic field is changed. This correlation length is extracted experimentally for a CuMn 6 at. % single crystal, as well as for simulations on the Janus II special-purpose supercomputer, the latter with time and length scales comparable to experiment. The non-linear magnetic susceptibility is reported from experiment and simulations, using ¿(t, t w; T) as the scaling variable. Previous experiments are reanalysed, and disagreements about the nature of the Zeeman energy are resolved. The growth of the spin-glass magnetisation in zero-field magnetisation experiments, M ZFC(t, t w; T), is measured from simulations, verifying the scaling relationships in the dynamical or non-equilibrium regime. Our preliminary search for the de Almeida-Thouless line in D = 3 is discussed.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Memory and rejuvenation effects in spin glasses are governed by more than one length scale

  • Baity-Jesi, M.
  • Calore, E.
  • Cruz, A.
  • Fernández, L. A.
  • Gil-Narvión, J. M.
  • González-Adalid Pemartín, I.
  • Gordillo-Guerrero, A.
  • Iñiguez, D.
  • Maiorano, A.
  • Marinari, E.
  • Martín-Mayor, V.
  • Moreno-Gordo, J.
  • Muñoz Sudupe, A.
  • Navarro, D.
  • Paga, I.
  • Parisi, G.
  • Pérez-Gaviro, S.
  • Ricci-Tersenghi, F.
  • Ruiz-Lorenzo, J. J.
  • Schifano, S. F.
  • Seoane, B.
  • Tarancón, A.
  • Yllanes, D.
Memory and rejuvenation effects in the magnetic response of off-equilibrium spin glasses have been widely regarded as the doorway into the experimental exploration of ultrametricity and temperature chaos. Unfortunately, despite more than twenty years of theoretical efforts following the experimental discovery of memory and rejuvenation, these effects have, thus far, been impossible to reliably simulate. Yet, three recent developments convinced us to accept this challenge: first, the custom-built Janus II supercomputer makes it possible to carry out simulations in which the very same quantities that can be measured in single crystals of CuMn are computed from the simulation, allowing for a parallel analysis of the simulation and experimental data. Second, Janus II simulations have taught us how numerical and experimental length scales should be compared. Third, we have recently understood how temperature chaos materializes in aging dynamics. All these three aspects have proved crucial for reliably reproducing rejuvenation and memory effects on the computer. Our analysis shows that at least three different length scales play a key role in aging dynamics, whereas essentially all the theoretical analyses of the aging dynamics emphasize the presence and crucial role of a single glassy correlation length.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Superposition principle and nonlinear response in spin glasses

  • Paga, I.
  • Zhai, Q.
  • Baity-Jesi, M.
  • Calore, E.
  • Cruz, A.
  • Cummings, C.
  • Fernandez, L. A.
  • Gil-Narvion, J. M.
  • Pemartin, I. Gonzalez-Adalid
  • Gordillo-Guerrero, A.
  • Iñiguez, D.
  • Kenning, G. G.
  • Maiorano, A.
  • Marinari, E.
  • Martin-Mayor, V.
  • Moreno-Gordo, J.
  • Muñoz-Sudupe, A.
  • Navarro, D.
  • Orbach, R. L.
  • Parisi, G.
  • Perez-Gaviro, S.
  • Ricci-Tersenghi, F.
  • Ruiz-Lorenzo, J. J.
  • Schifano, S. F.
  • Schlagel, D. L.
  • Seoane, B.
  • Tarancon, A.
  • Yllanes, D.
The extended principle of superposition has been a touchstone of spin-glass dynamics for almost 30 years. The Uppsala group has demonstrated its validity for the metallic spin glass, CuMn, for magnetic fields H up to 10 Oe at the reduced temperature Tr=T/Tg=0.95, where Tg is the spin-glass condensation temperature. For H>10 Oe, they observe a departure from linear response which they ascribe to the development of nonlinear dynamics. The thrust of this paper is to develop a microscopic origin for this behavior by focusing on the time development of the spin-glass correlation length, ξ(t,tw;H). Here, t is the time after H changes, and tw is the time from the quench for T>Tg to the working temperature T until H changes. We connect the growth of ξ(t,tw;H) to the barrier heights Δ(tw) that set the dynamics. The effect of H on the magnitude of Δ(tw) is responsible for affecting differently the two dynamical protocols associated with turning H off (TRM, or thermoremanent magnetization) or on (ZFC, or zero-field-cooled magnetization). This difference is a consequence of nonlinearity based on the effect of H on Δ(tw). Superposition is preserved if Δ(tw) is linear in the Hamming distance Hd (proportional to the difference between the self-overlap qEA and the overlap q[Δ(tw)]). However, superposition is violated if Δ(tw) increases faster than linear in Hd. We have previously shown, through experiment and simulation, that the barriers Δ(tw) do increase more rapidly than linearly with Hd through the observation that the growth of ξ(t,tw;H) slows down as ξ(t,tw;H) increases. In this paper, we display the difference between the zero-field-cooled ξZFC(t,tw;H) and the thermoremanent magnetization ξTRM(t,tw;H) correlation lengths as H increases, both experimentally and through numerical simulations, corresponding to the violation of the extended principle of superposition in line with the finding of the Uppsala Group.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Quantifying Memory in Spin Glasses

  • Paga, I.
  • He, J.
  • Baity-Jesi, M.
  • Calore, E.
  • Cruz, A.
  • Fernandez, L.¿A.
  • Gil-Narvion, J.¿M.
  • Gonzalez-Adalid Pemartin, I.
  • Gordillo-Guerrero, A.
  • Iñiguez, D.
  • Maiorano, A.
  • Marinari, E.
  • Martin-Mayor, V.
  • Moreno-Gordo, J.
  • Muñoz Sudupe, A.
  • Navarro, D.
  • Orbach, R.¿L.
  • Parisi, G.
  • Perez-Gaviro, S.
  • Ricci-Tersenghi, F.
  • Ruiz-Lorenzo, J.¿J.
  • Schifano, S.¿F.
  • Schlagel, D.¿L.
  • Seoane, B.
  • Tarancon, A.
  • Yllanes, D.
Rejuvenation and memory, long considered the distinguishing features of spin glasses, have recently been proven to result from the growth of multiple length scales. This insight, enabled by simulations on the Janus II supercomputer, has opened the door to a quantitative analysis. We combine numerical simulations with comparable experiments to introduce two coefficients that quantify memory. A third coefficient has been recently presented by Freedberg et al. We show that these coefficients are physically equivalent by studying their temperature and waiting-time dependence.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Radiation Pattern Recovery from Tilted Orbital Sampling Measurements via Sparse Spherical Harmonic Expansion

  • Labodía, Miguel
  • Mediano, Arturo
This paper proposes a reconstruction framework for estimating the far-field (FF) radiation patterns of large, heavy, or non-rotatable wireless-enabled systems. The method combines a tilted orbital sampling (ToS) strategy with sparse spherical harmonic (SH) expansion, compressed sensing (CS), and convex optimization (CO), thereby linking a mechanically constrained acquisition scheme with a mathematically efficient recovery process. The purpose of this integration is not only to reduce the number of measurements but also to retrieve the radiation information most relevant to Internet of Things (IoT) devices and bulky equipment that cannot be easily rotated within anechoic chambers. The framework is validated on two representative cases: a canonical half-wave dipole and a commercial Wi-Fi-enabled device. In the latter and more challenging case, accurate reconstruction is achieved with fewer than 30 SH coefficients and using less than 20% of the measurements required by a conventional full-sphere scan, with the normalized root-mean-square error remaining below 5%. Although inaccessible angular regions may be partially uncharacterized, such directions are of minor relevance for the intended operational coverage. The resulting SH-based representation can be seamlessly integrated into ray-tracing propagation simulators and electromagnetic optimization workflows, enabling efficient and application-oriented OTA characterization under realistic chamber constraints.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Memory and rejuvenation effects in spin glasses are governed by more than one length scale

  • Baity-Jesi, M.
  • Calore, E.
  • Cruz, A.
  • Fernández Pérez, Luis Antonio
  • Gil-Narvion, J. M.
  • González-Adalid Pemartín, Isidoro
  • Gordillo-Guerrero, A.
  • Iñiguez, D.
  • Maiorano, A.
  • Marinari, E.
  • Martín Mayor, Víctor
  • Moreno-Gordo, J.
  • Muñoz Sudupe, Antonio
  • Navarro, D.
  • Paga, I.
  • Parisi, G.
  • Perez-Gaviro, S.
  • Ricci-Tersenghi, F.
  • Ruiz-Lorenzo, J. J.
  • Schifano, S. F.
  • Seoane Bartolomé, Beatriz
  • Tarancon, A.
  • Yllanes, D.
Memory and rejuvenation effects in the magnetic response of off-equilibrium spin glasses have been widely regarded as the doorway into the experimental exploration of ultrametricity and temperature chaos. Unfortunately, despite more than twenty years of theoretical efforts following the experimental discovery of memory and rejuvenation, these effects have, thus far, been impossible to reliably simulate. Yet, three recent developments convinced us to accept this challenge: first, the custom-built Janus II supercomputer makes it possible to carry out simulations in which the very same quantities that can be measured in single crystals of CuMn are computed from the simulation, allowing for a parallel analysis of the simulation and experimental data. Second, Janus II simulations have taught us how numerical and experimental length scales should be compared. Third, we have recently understood how temperature chaos materializes in aging dynamics. All these three aspects have proved crucial for reliably reproducing rejuvenation and memory effects on the computer. Our analysis shows that at least three different length scales play a key role in aging dynamics, whereas essentially all the theoretical analyses of the aging dynamics emphasize the presence and crucial role of a single glassy correlation length.