Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 16
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Power factor correction stage and matrix zero voltage switching resonant inverter for domestic induction heating appliances

  • Pérez-Tarragona, Mario
  • Sarnago, Héctor
  • Lucía, Óscar
  • Burdío, José M.
The technology of flexible cooking surfaces applied to domestic induction heating (IH) appliances offers several advantages that improve the experience of the users, not only because the safety or cleanness, but also due to the fast heating and flexibility. These cooktops have more challenging design requirements because of different mains connections, efficiency requirements, electromagnetic compatibility (EMC) standards, control complexity, and cost. In previous works, the use of a front-end power factor corrector (PFC) rectifier has been proposed to overcome these restrictions. In order to get a cost-effective implementation, this paper proposes the use of a front-end PFC stage and a matrix resonant inverter, which features zero voltage switching (ZVS), to achieve a reduced number of power devices, and get a high performance and reduced power losses in the converter. Finally, an experimental prototype with four outputs of 3.6 kW has been implemented to prove the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Self-adaptive overtemperature protection materials for safety-centric domestic induction heating applications

  • Pascual, A.
  • Acero, J.
  • Llorente, S.
  • Carretero, C.
  • Burdio, J. M.
Security aspects in the household sphere have become a major concern in modern societies. In particular, regardless of the technology used, users increasingly appreciate a protection system to prevent material damage in the case of human errors or distractions during the cooking process. This paper presents a sensorless method for detecting and limiting overtemperature, unique to induction cooktops, based on their specific features, such as automatic pot detection and load power factor estimation. The protection system exploits the change in the load material properties at certain temperatures, the effect of which may be enhanced by arranging a multilayer structure comprising a low Curie temperature alloy and an aluminum layer. The proposed multilayer load exhibits two differentiated states: a normal state, where the cookware is efficiently heated, and a protection state, above the safety temperature, where the power factor abruptly decreases, limiting the overheating and making the state easily detectable by the cooktop. This method of overtemperature self-protection uses the electronics of conventional induction cooktops; therefore, no other sensors or systems are required, reducing its complexity and costs. Simulation and experimental results are provided for several cookware designs, thereby proving the feasibility of this proposal.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

L2C2: Last-level compressed-contents non-volatile cache and a procedure to forecast performance and lifetime

  • Escuin, Carlos
  • Ibáñez, Pablo
  • Navarro, Denis
  • Monreal, Teresa
  • Llabería, José M.
  • Viñals, Víctor
Several emerging non-volatile (NV) memory technologies are rising as interesting alternatives to build the Last-Level Cache (LLC). Their advantages, compared to SRAM memory, are higher density and lower static power, but write operations wear out the bitcells to the point of eventually losing their storage capacity. In this context, this paper presents a novel LLC organization designed to extend the lifetime of the NV data array and a procedure to forecast in detail the capacity and performance of such an NV-LLC over its lifetime. From a methodological point of view, although different approaches are used in the literature to analyze the degradation of an NV-LLC, none of them allows to study in detail its temporal evolution. In this sense, this work proposes a forecasting procedure that combines detailed simulation and prediction, allowing an accurate analysis of the impact of different cache control policies and mechanisms (replacement, wear-leveling, compression, etc.) on the temporal evolution of the indices of interest, such as the effective capacity of the NV-LLC or the system IPC. We also introduce L2C2, a LLC design intended for implementation in NV memory technology that combines fault tolerance, compression, and internal write wear leveling for the first time. Compression is not used to store more blocks and increase the hit rate, but to reduce the write rate and increase the lifetime during which the cache supports near-peak performance. In addition, to support byte loss without performance drop, L2C2 inherently allows N redundant bytes to be added to each cache entry. Thus, L2C2+N, the endurance-scaled version of L2C2, allows balancing the cost of redundant capacity with the benefit of longer lifetime. For instance, as a use case, we have implemented the L2C2 cache with STT-RAM technology. It has affordable hardware overheads compared to that of a baseline NV-LLC without compression in terms of area, latency and energy consumption, and increases up to 6-37 times the time in which 50% of the effective capacity is degraded, depending on the variability in the manufacturing process. Compared to L2C2, L2C2+6 which adds 6 bytes of redundant capacity per entry, that means 9.1% of storage overhead, can increase up to 1.4-4.3 times the time in which the system gets its initial peak performance degraded.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Printed circuit board coils of multi-track litz structure for 3.3 kW inductive power transfer system

  • Narvaez, Alexis
  • Carretero, Claudio
  • Lope, Ignacio
  • Acero, Jesús
This paper presents the optimization procedure of an inductive power transmission (IPT) system which utilizes large size spiral printed circuit board (PCB) coils for high- power transfer. Printed circuit boards for coil assembly provides advantages in the manufacturing process through the use of cost- effective flexible fabrication techniques. Furthermore, this kind of construction offers a low profile device, which is of great interest for applications with space constraints. PCB-based IPT system coils can achieve high energy efficiency by applying litz-structure braiding techniques, as investigated in this work, where the objective was to obtain an optimized balance between the conduc- tion losses and proximity losses associated with the number and dimensions of the traces. Considering the geometrical dimensions and manufacturing constraints, we will proceed to obtain the characteristics of the coil to achieve optimal performance. The estimation of coil losses were in part based on finite element simulations, and the results were conveniently processed with the appropriate mathematical methods. Numerical simulation and experimental results were conducted for validation on a prototype suitable to transfer up to 3.3 kW for a transmitter- receiver distance of 10 cm. In the experimental arrangement, a maximum efficiency in the coils of 93% has been measured, and the overall efficiency of 88% has been reached for the entire IPT system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Small-sized immersible water heaters for domestic induction heating technology

  • Pascual, Alberto
  • Acero, jesús
  • Llorente, Sergio
  • Carretero, Claudio
  • Burdio, José M.
Induction cooktops are a key element in home electrification. This paper presents a new use of induction cooktops, which allows the preparation of infusions directly in a ceramic mug. It is proposed the design of a water heater with an immersible metallic load. The dimensions of the load allow its embedding in small ceramic vessels. Despite being smaller than conventional inductors, the immersible load has a specific shape that allows it to efficiently receive the energy from the induction cooktops and quickly heat the liquid inside the mug. Its geometry consists of a flat disk with sidewalls on its edge, which provides low reluctance paths for the magnetic field, resulting in improved transmitted power and efficiency. The load is arranged in a multilayer structure consisting of a ferromagnetic alloy with low Curie temperature at the bottom and aluminum on the top, which confers self-detection capabilities against dangerous overheating. The study of the proposal has been carried out with a finite element analysis model, and the feasibility of this proposal has been demonstrated through experimental results of its performance. Finally, the immersible water heater, powered by an induction cooktop, has been compared to other liquid heating systems, such as the microwave and the kettle, with promising results.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tumor location on electroporation therapies by means of multi-electrode structures and machine learning

  • Briz, P.
  • López-Alonso, B.
  • Sarnago, H.
  • Burdío, J.M.
  • Lucía, O.
Electroporation is a phenomenon produced in the cell membrane when it is exposed to high pulsed electric fields that increases its permeability. Among other application fields, this phenomenon can be exploited in a clinical environment for tumor ablation therapies. In this context to achieve optimum results, it is convenient to focus the treatment on the tumor tissue to minimize side effects. In this work, a pre-treatment tumor location method is developed, with the purpose of being able to precisely target the therapy. This is done by taking different impedance measurements with a multi-output electroporation generator in conjunction with a multi-electrode structure. Data are processed by means of a vector of independent artificial neural networks, trained and tested with simulation data, and validated with phantom gels. This algorithm proved to provide suitable accuracy in spite of the low electrode count compared to the number of electrodes of a standard electrical impedance tomography device.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electromagnetic modeling and analysis of multimaterial cookware for domestic induction heating

  • Pascual, Alberto
  • Acero, Jesús
  • Carretero, Claudio
  • Llorente, Sergio
  • Burdio, José M.
The performance of induction cooktops (inductor and electronic power converter) is closely related to the inductive properties of the cookware used. Traditionally, they are designed to work optimally with fully ferromagnetic cookware. However, multimaterial cookware with a bottom surface composed of a ferromagnetic material and small pieces of aluminum are nowadays more commonly used. Designing cooktops to also work optimally with this cookwares requires identifying the equivalent parameters, Req and Leq, obtained from the electromagnetic models of the inductor-load system. Modeling multimaterial cookware, with a large number of inserts, complicates the model design and increases its computational cost. This work presents an equivalent model for multimaterial loads that allows the evaluation of the inductor performance and obtaining the equivalent parameters quickly and accurately. The multimaterial cookware is modeled as a disk of uniform material with equivalent electromagnetic properties, µr,eq and σeq, which depend on the properties of each material and the proportion of area they occupy. The equivalent model has been validated by electromagnetic simulation using a FEA tool and by experimental results. Finally, based on the results obtained, an analysis has been carried out to evaluate the importance of design factors such as the choice of the cookware base material and the size, arrangement, and number of inserts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Series-Resonant Matrix Inverter with Asymmetrical Modulation for Improved Power Factor Correction in Flexible Induction Heating Appliances

  • Guillen, P.
  • Sarnago, H.
  • Lucia, O.
  • Burdio, J.M.
Induction heating appliance operation is constrained by the nonlinear pot material behavior under the generated magnetic field. The equivalent load seen by the inverter varies with the intensity of the field, meaning that this variation is dependent on the mains voltage. In flexible-surface induction cooktops, this fact is combined with a high coil number and different pots to be powered simultaneously, increasing the complexity to control the transmitted power while maintaining proper mains current consumption. In this article, two noncomplementary asymmetrical modulations with in-cycle parameter variation are proposed for improved power factor correction while avoiding the need for switching frequency variation and intermodulation noise in multiload systems. The proposed strategies are analyzed and experimentally tested using a 3.6 kW multi-inverter prototype featuring five induction coils.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

GaN-based matrix resonant power converter for domestic induction heating

  • Guillen, P.
  • Sarnago, H.
  • Lucía, O.
  • Burdio, J. M.
Flexible-surface induction cooktops must operate with a variety of induction heating loads with different behavior and power setpoints to be heated simultaneously. In this context, multi-output inverter topologies aim at achieving independent power management while featuring low power-device count and high power density. However, they suffer from limitations when applying classical modulation strategies to ensure soft switching, which is required to reduce transistor losses and achieve efficient operation. In this scenario, wide band-gap devices reduce switching losses, opening a new paradigm in power conversion where soft switching is not mandatory in order to achieve high efficiency. This paper proposes an implementation of a multi-output resonant inverter based on GaN HEMTs and evaluates various modulation strategies in terms of efficiency under different switching modes. The proposed approach is designed and experimentally validated by means of a 2-coil 2000 W prototype implementation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Contribución de congreso (ConferenceOutput)

Printed circuit board coil design with reduced series resistance for high power inductive wireless power transmission systems

  • Narvaez, A. A.
  • Carretero, C.
  • Acero, J.
  • Burdío, J. M.
Due to the growing use of the popular wireless power transmission (WPT) technology, an innovative method of coil design and optimization is presented in this paper. This method has been applied to develop spiral printed circuit board (PCB) coils with litz-wire structure. From the geometry definition, the design process is carried out by means of finite element analysis (FEA). In addition, as a complement to the design process, some prototypes of spiral PCB coils were built to contrast the simulation results and experimental measurements by means of the small-signal characterization, which reflects the success of the applied method.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Electroporation pulse generator for biomedical applications with improved output voltage ripple and reduced bus capacitor

  • Sarnago, H.
  • Burdio, J. M.
  • Lucia, Ó.
Electroporation is a promising cancer treatment based on applying short electric field pulses. In this context, highly versatile pulse generators are required to generate high-voltage low-ripple pulses in the µs range. In the past, several multi-level converters have been proposed to achieve this aim. Achieving constant output voltage and, consequently, electric field is essential to obtain predictable treatments and minimize the risks of tumor relapse. However, significant bus capacitance is required to achieve the required performance, leading to bulky equipment with serious safety implications due to the stored energy. In this letter, a high-performance pulse generator for electroporation is proposed that takes advantage of a multi-level structure with linear voltage regulation to achieve the desired performance with reduced bus capacitance. The proposed converter has been designed and tested experimentally during both laboratory and operation room treatments.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Coupling between cavity resonances and characteristic modes on household appliances

  • Labodía, Miguel
  • Español, Jorge
  • Tesa, Jorge
  • Mediano, Arturo
Home appliances generally comprise a mechanical envelope, or enclosure, of electrically conductive material (steel, aluminum, etc.) that houses electrical and electronic circuits. That envelope typically includes all kind of apertures, openings, holes, slots, windows, etc., to connect—physically and electromagnetically—the external space with its internal space. The performance of that envelope is a key element to comply with surface current EMI/EMC (Electro-Magnetic Interference/Electro-Magnetic Compatibility) regulations for electromagnetic interference, both emissions and immunity. Here, we present a novel theoretical proposal that consists of establishing the mathematical relationship of the coupling between the resonant modes of an internal cavity (RMs) contained in a conductive body and the characteristic modes (CMs) on the external surface of its envelope through the openings that connect those external and internal spaces, and doing so by means of equivalent virtual surface currents located in those openings. The comparative results of simulations and actual measurements of immunity in an anechoic chamber (measurements originally oriented to other purposes) are presented as above-mentioned evidence of resonating modes coupling on the frequency range 40–1000 MHz. However, this theoretical proposal is novel and remains to be developed in greater depth and detail in future works.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative evaluation of different cables for magnetic couplers in inductive power transfer systems

  • Acero, Jesús
  • Lope, Ignacio
  • Carretero, Claudio
  • Sarnago, Héctor
  • Burdío, José Miguel
Copper litz wires are widely used in wireless charging stations of light-duty electric vehicles. This type of cable is specifically mentioned in the SAE J2954 standard. However, details as the number and diameter of strands, or the material of conductors are not mentioned in the standard, which makes room to address some research and innovations. In this work, several alternatives to the traditional copper-litz wires are analyzed. Specifically, aluminum litz wire, copper-clad aluminum litz wire, and copper tubes are considered as alternatives to standard litz wire for the mentioned application. Potential benefits of the considered alternatives could include weight and cost savings. However, these advantages could not be enough to justify a wiring change if the resistance of the power pads increases and, equivalently, the efficiency of the electromagnetic power transfer decreases. For this reason, a model of the parasitic resistance of windings is proposed by combining the analytical ac resistance of two-layered round strands and finite element simulations. This model is used to obtain a figure of merit related with the efficiency of the electromagnetic energy transfer which is used to compare the different cables. Apart from efficiency, thermal behavior, cost and weight are also considered for comparison purposes. As a result, some conclusions about the suitability of each cable with respect to the operating frequency range are extracted.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Dual-Output Extended-Power-Range Quasi-Resonant Inverter for Induction Heating Appliances

  • Sarnago, Hector
  • Burdio, Jose M.
  • Lucia, Oscar
Induction heating technology provides efficient and reliable heating processes that outperform other classical heating methods based on fossil fuels or resistive heating. Among its many industrial, domestic, and biomedical applications, domestic induction heating appliances are a popular choice due to these advantages. This technology requires high-performance and cost-effective inverters that take most of the power devices and the converter topology. Depending upon the desired performance and output-power range, different power converters are employed. However, currently, most platforms rely on the well-known series resonant half-bridge topology. Single-switch topologies offer a cost-effective implementation but are limited to the low-cost low-performance markets due to their limitations in terms of output power and power control. In this context, this paper proposes a high-performance dual-output quasi-resonant inverter for modern induction heating appliances. Unlike state-of-the-art proposals, this converter achieves a full-output-power operating range of up to 3.6 kW. Consequently, it provides a high-performance cost-effective alternative to current implementations. The proposed converter is analyzed in this paper and experimentally verified using a dual-output 3.6-kW induction heating appliance prototype.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Normalized nonlinear impedance boundary condition in anhysteretic magnetic material for eddy current problems

  • Carretero, Claudio
  • Acero, Jesús
  • Burdio, José M.
Numerical simulations of induction heating systems often assume that the properties of the induction load are linear. Thus, its electrical behavior is described by an equivalent impedance which exhibits frequency dispersion but remains independent of the excitation level. Although deriving such solutions is computationally complex, the use of the impedance boundary condition (IBC) provides high-quality results for linear media. This boundary condition replaces the effects of media with rapidly varying fields by a ratio between their tangential components at the surface. However, in typical induction loads, magnetic saturation of the material causes phenomena of dependence of the properties on the current level. The precise formulation of such an IBC can only be performed considering linear media. This paper proposes calculating a nonlinear excitation level-dependent IBC numerically, considering the saturation dependence of the magnetic properties given by a Langevin function BH-loop. A normalized form of the nonlinear IBC will be obtained from the equation governing this type of behavior, thereby reducing the computational cost of the solution. The usefulness of the proposed nonlinear IBC will be validated by comparing it with results obtained from conventional time domain simulations of a typical induction heating system.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Optimizing IRE targeting using multi-electrode structure and biomedical multi-output generator

  • López-Alonso, Borja
  • Briz, Pablo
  • Sarnago, Hector
  • Burdio, José M.
  • Lucia, Oscar
Purpose This paper aims to study the feasibility of proposed method to focus the electroporation ablation by mean of multi-output multi-electrode system. Design/methodology/approach The proposed method has been developed based on a previously designed electroporation system, which has the capabilities to modify the electric field distribution in real time, and to estimate the impedance distribution. Taking into consideration the features of the system and biological tissues, the problem has been addressed in three phases: modeling, control system design and simulation testing. In the first phase, a finite element analysis model has been proposed to reproduce the electric field distribution within the hepatic tissue, based on the characteristics of the electroporation system. Then, a control strategy has been proposed with the goal of ensuring complete ablation while minimizing the affected volume of healthy tissue. Finally, to check the feasibility of the proposal, several representative cases have been simulated, and the results have been compared with those obtained by a traditional system. Findings The proposed method achieves the proposed goal, as part of a complex electroporation system designed to improve the targeting, effectiveness and control of electroporation treatments and serve to demonstrate the feasibility of developing new electroporation systems capable of adapting to changes in the preplanning of the treatment in real-time. Originality/value The work presents a thorough study of control method to multi-output multi-electrode electroporation system by mean of a rigorous numerical simulation.