Pasar al contenido principal

ANALISIS GEOLOGICO Y GEOFISICO DE LA CONEXION ENTRE ZONAS TRANSVERSALES Y ESTRUCTURAS HEREDADAS DE BASAMENTO EN REGIONES DE CABALGAMIENTOS Y PLIEGUES: EL EJEMPLO DE TAIWAN

PGC2018-094227-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Imaging active faulting in the western Taiwan Strait

  • Zhang, Y.
  • Kuo-Chen, H.
  • Alvarez-Marrón, Joaquina
  • Brown, Dennis
  • Lin, Andrew Tien-Shun
  • Xie, Z.
  • Jin, Xing
Large, destructive historical earthquakes off the coast of China’s Fujian Province point to important tectonic activity in the western Taiwan Strait that, until recently, has received little attention. We present newly acquired reflection seismic data that is used to study the shallow crustal structure of the western Taiwan Strait. With these data we map the location of the Benhai fault for the first time, describe its upper crustal geometry and, in combination with seismicity and earthquake focal mechanisms, interpret its kinematics. These new data demonstrate that there is wide spread evidence of faulting that reaches the sea floor in the western Taiwan Strait, clearly indicating that the Benhai fault is active. Faults that cut up section from steep basin sidewalls to form flower structures or terraced sidewall fault zones, together with the fault and basin map pattern, are consistent with this fault zone being in the early developmental stages of a dextral strike-slip system. Earthquake focal mechanisms, although not definitive, support the model of an active dextral strike-slip fault system in the western Taiwan Strait. © 2020, The Author(s)., ZYF acknowledge funding supported by the National Natural Science Foundation of China (Grant No. 41774104). KC acknowledge funding supported by the Ministry of Science and Technology (MOST 108-2116-M-008-022-MY3). JAM and DB acknowledge funding provided by the Spanish Ministerio de Economia y Competividad grant PGC2018-094227-B-I00. DB also acknowledges financing through the Salvador de Madariaga program (project PRX17/00036) provided by the Spanish Ministerio de Educación, Cultura, y Deporte for a 6 month stay at NCU. We also thank C.-W. Ho of Central Weather Bureau for providing the earthquake catalogue., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Structure of the south-central Taiwan fold-and-thrust belt

  • Brown, Dennis
  • Alvarez-Marrón, Joaquina
  • Kuo-Chen, Hao
  • Wu, Yih-Min
  • Camanni, Giovanni
  • Biete, Cristina
EGU General Assembly 2020, Online, 4–8 May 2020, Studies of mountain belts worldwide have shown that the structural, mechanical, and kinematic evolution of their foreland fold-and-thrust belts are strongly influenced by the structure of the continental margins that are involved in the deformation. The area on and around the island of Taiwan provides an unparalleled opportunity to investigate this because the entire profile of the SE margin of the Eurasian plate, from the shelf in the north to the slope and continent-ocean transition in the south and the offshore, is currently involved in a collision with the Luzon arc on the Philippine Sea plate. Taiwan can, then, provide key insights into how such features as rift basins on the shelf, the extensional faults that form the shelf-slope break in the basement, or the structure of the extended crust and morphology of the sedimentary carapace of the slope can be directly reflected in the structural architecture, the location and pattern of seismicity, topography, and the contemporaneous stress and strain fields of a fold-and-thrust belt. For example, east-northeast striking faults that have been mapped on the necking zone of the Eurasian margin can be traced into the island of Taiwan where they are causing important along-strike changes in various aspects of the structural, mechanical, kinematic, and morphological behavior of the fold-and-thrust belt. In particular, across the upper part of the necking zone there is an abrupt north-south change in structure, an increase in the amount of seismicity, an increase in topography, a rotation of the direction of maximum compressive horizontal stress, of the GPS displacement vectors, the compressional strain rate, and the maximum shear strain rate. These changes are interpreted to be caused by east-northeast striking, dextral strike-slip faulting in the basement that is taking place as a result of the reactivation of pre-existing faults along the upper part of the necking zone. The abrupt southeastward increase in topography across the upper part of the necking zone is the surface expression of the basal thrust of the fold-and-thrust belt ramping down into the basement, with maximum elevations reached in the basement-involved thrust sheets, suggesting a causal link between basement involvement in the thrusting and high topography. On the shelf, the roughly northeast-oriented Hsuehshan Trough is inverting along almost north-south striking basin bounding faults that penetrate into the middle crust and have well-clustered, deep seismicity. There are no substantial differences in the contemporaneous stress and strain field. There is, however, a clear relationship between basement involvement in the thrusting and the development of high topography in the Hsuehshan Range. Only the upper part of the slope is involved in the fold-and-thrust belt in southernmost Taiwan. In this area, there is a reduction of the amount of seismicity and lower topography. The largest part of the corresponding thrust wedge developed in the lower slope is offshore., This work is funded by the Spanish Ministerio de Ciencia, Innovación y Universidades grant PGC2018-094227-B-I00.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Potential field constraints on the basement structure of the Taiwan thrust-and-fold belt: preliminary results

  • Lozano, O.
  • Ayarza, P.
  • Alvarez-Marrón, Joaquina
  • Brown, Dennis
vEGU21: Gather Online | 19-30 April 2021, The Taiwan orogen forms an active mountain range that has been evolving since the Late Miocene as a result of the oblique collision between the Luzon Arc, located in the Philippine Sea Plate, and the continental margin of the Eurasian Plate. Due to this configuration, some inherited structures from the continental margin are at high angle to the structural trend of the Taiwan thrust-and-fold belt and are thought to play an important role in present day tectonics. The inherited structures resulted from processes undergone by the Eurasian margin, such as rifting in the Early Eocene, and further local extension in the Middle Miocene. They comprise sub-vertical faults that are presently being reactivated and are actively involved in the evolution of the structure, seismicity and topography of Taiwan, causing transverse zones in its thrust-and-fold belt and foreland. The key objective of this research is to help define the deep structure in southern Taiwan, as well as the location and kinematics of these inherited east-northeast striking faults. To achieve this goal, we undergo a multidisciplinary approach based on the analysis and modelling of gravity (free-air and Bouguer anomaly) and magnetic data. The application of analytical techniques, such as horizontal directional derivatives allows us to identify gradients that can be related to the geometry and minimum horizontal extent of these basement structures in the margin and in Taiwan. Forward modelling of gravity and magnetic data contributes further to provide a better-constrained quantitative approach to their depth as they appear to affect the top of the basement. Finally, these results have been integrated with structural studies and earthquake information in order to improve our understanding of the southern Taiwan and Eurasian continental margin structure. The preliminary results allow us to discuss the limitations of vertical derivatives and residual potential field data when dealing with deep inherited basement structures. The present dataset has proven to be useful to discern the existence of a deformed reactivated basement in the foreland and frontal part of the Taiwan thrust-and-fold belt, and improve our comprehension of its crustal structure. Due to the limitations of potential field data as the depth of the source increases, the resolution diminishes towards the E of the thrust-and-fold belt. This research is part of project PGC2018-094227-B-I00 funded by the Spanish Research Agency of the Ministry of Science and Innovation of Spain. Olivia Lozano acknowledges funding from the same agency through contract PRE2019-091431., This research is part of project PGC2018-094227-B-I00 funded by the Spanish Research Agency ofthe Ministry of Science and Innovation of Spain. Olivia Lozano acknowledges funding from thesame agency through contract PRE2019-091431
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Regional geology, extreme weather events and natural disasters: Environmentally-forced, involuntary settlement migrations of the indigenous people of southern Taiwan

  • Giletycz, Slawomir Jack
  • Kot-Giletycz, Olimpia
  • Brown, Dennis
Active mountain belts in monsoonal climates are characterized by rapid denudation due to erosion and mass wasting processes. In such areas, unstable topography caused by local geological conditions combined with extreme rainfall or earthquakes impact on indigenous people, especially through involuntary settlement migration. Anthropological surveys in southern Taiwan show that the oral traditions of indigenous people preserve records of natural disasters that took place several hundred years ago. When combined with geological data, these stories allow us to assess the triggers and underlying causes that led to settlement migrations. These settlements are located in the Central Range of southern Taiwan, a high-relief terrain comprised of Miocene formations characterized by well-developed slaty cleavage (S1) that forms dip slopes that are prone to landslides. Here, we investigate how extreme events coupled with the geological setting caused two relocations of a settlement of the Paiwan group within approximately 350 years. We also draw attention to the point that the oral traditions of indigenous groups can provide important data sets for reconstructing landslides in the recent past (less than 500 years) which other, more traditional methods (e.g. digital data archives) do not record. We conclude that extreme weather provides the trigger, and local geological conditions the underlying factors, for natural disasters that have had a significant impact on the indigenous people in southern Taiwan., Brown acknowledges funding from the Spanish Ministry of Science, Innovation, and Universities through grant number PGC2018-094227-B-I00, as well as a Chaired Professor stipend from the Department of Earth Sciences, National Central University, Taiwan, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Desde el cinturón de pliegues y cabalgamientos al prisma de acreción en el sur de Taiwán: estructura cortical, From the fold-and-thrust belt to the offshore accretionary prism in the south of Taiwan: crustal structure.

  • Alvarez-Marrón, Joaquina
  • Brown, Dennis
  • Alcalde, Juan
  • Marzán, Ignacio
  • Kuo-Chen, H.
  • Ayarza, P.
  • Carbonell, Ramón
X Congreso Geológico de España, 5-7 Julio 2021, Vitoria - Gasteiz, En Taiwán se da una colisión oblicua entre el arco de Luzón en la Placa de Filipinas y el margen continental de Eurasia. El cinturón de pliegues y cabalgamientos (FTB) de este orógeno pasa hacia el sur a una cuña acrecional submarina en la fosa de Manila. El objetivo de este estudio es examinar la estructura en esa transición. Para ello se usan datos de campo, perfiles sísmicos de reflexión marina y modelos de tomografía sísmica. Se construyen mapas de contornos estructurales del cabalgamiento basal y modelos de profundidad del Moho en la región de transición. El cabalgamiento basal del sistema FTB/prisma corta lateralmente y atraviesa la cobertera sedimentaria del margen de forma que los sedimentos pre-orogénicos Miocenos se incorporan al bloque cabalgante a medida que se pasa desde la cuña acrecional al FTB. El Moho presenta variaciones de profundidad que pueden relacionarse con la oblicuidad de la colisión. De esta forma, el engrosamiento de la corteza es menor bajo la región en que colisiona la parte más delgada del margen en el sur de Taiwán., In Taiwan there is an active, oblique arc-continent colision between the Luzon Arc on the Philippine Sea Plate and the continental margin of Eurasia. The Fold-and-Thrust Belt (FTB) in Taiwan passes southwards into a submarine accretionary wedge at the Manila subduction zone. The aim of this contribution is to examine how an on land FTB changes into a marine accretionary prism in that tectonic context. Here we use surface geology, marine seismic reflection profiles, and seismic tomography models to obtain maps of the basal thrust and the depth to the Moho across a transition area. The basal thrust of the FTB/Prism system cuts laterally along-strike through the margin’s sedimentary cover to incorporate thicker Miocene pre-orogenic sediments onto its hanging wall as it passes from the submarine wedge to the on land FTB. The Moho shows changes of depth that may be related to the changes in crustal thickness and the obliquity of the collision. Because of this, crustal thickening is less pronounced beneath southern Taiwan where the thinner part of the margin is colliding with the arc., Esta investigación es parte del proyecto PGC2018-094227-B-I00 financiado por la Agencia Española de Investigación del Ministerio de Innovación Científica y Universidades de España.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Four decades of geophysical research on Iberia and adjacent margins

  • Diaz, J.
  • Torné, Montserrat
  • Vergés Masip, Jaume
  • Jimenez-Munt, Ivone
  • Martí Molist, Joan
  • Carbonell, Ramón
  • Schimmel, Martin
  • Geyer, Adelina
  • Ruiz Fernández, Mario
  • García-Castellanos, Daniel
  • Alvarez-Marrón, Joaquina
  • Brown, Dennis
  • Villaseñor, Antonio
  • Ayala, C.
  • Palomeras, Imma
  • Fernández Ortiga, Manel
  • Gallart Muset, Josep
The dimensions, the geographical position and the complex geological history of the Iberian Peninsula makes it a unique and singular target to study its crustal and upper mantle structure and geodynamical evolution using geophysical methods. The lithospheric structure beneath Iberia has been investigated since the 1970’s using deep multichannel seismic reflection and refraction/wide-angle reflection profiling. Gravimetric and magnetic data were acquired following the deployment of permanent and temporary stations, mostly during the 1990’s. Beginning in the late 1990’s, the progressive use of Global Navigation Satellite Systems (GNSS) instruments contributed to monitor the present-day motions. During the last decades, numerous geological and geophysical surveys have investigated the Iberian lithosphere and upper mantle in the onshore and offshore regions, the most recent ones related to the TopoIberia project. The approach developed in this contribution is twofold. Firstly, we summarize the available geophysical information over Iberia, from focusing on the upper crust to the lithosphere-asthenosphere boundary and the transition zone marking the bottom of the upper mantle. Results of GNSS data, potential fields, controlled source seismic profiles, magnetotelluric data, body and surface wave tomography, receiver functions and 2D and 3D lithospheric modeling are reviewed and compared. Secondly, we focus on the areas of greater geodynamic interest and the regions where inconsistencies within the geophysical results, or contradictions in their tectonic interpretation exist, identifying the major questions that are still under debate. Besides shedding light to the state of knowledge and pointing out present-day research challenges, this review provides a tool for the integration of the diverse geophysical datasets with the surface geology and geodynamical processes that are interpreted to have built the complex geology of the Iberian Peninsula., The authors acknowledge funding from the Generalitat de Catalunya, grant/awards number AGAUR 2017SGR1022, and AGAUR 2017SGR847, the Spanish Ministry of Science, Innovation, and Universities grant numbers RTI2018-095594-B-I00, PGC2018-095154-B-100 and PGC2018-094227-B-I00 and the Spanish Ministry of Economy and Competitiveness grant numbers CGL2017-84901-C2 and PIE-CSIC-201830E039. IP is funded by the Spanish Ministry of Science, Innovation, and Universities and University of Salamanca grant BEAGAL18/00090. AV acknowledges funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000928-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lightning-induced high temperature and pressure microstructures in surface and subsurface fulgurites

  • Kuo, Li-Wei
  • Smith, Steven A. F.
  • Chen, Chien-Chih
  • Ku, Ching-Shun
  • Chiang, Ching-Yu
  • Brown, Dennis
  • Negrini, M.
  • Huang, Wen-Jeng
  • Chen, Tze-Yuan
Cloud-to-ground lightning causes both high-temperature and high-pressure metamorphism of rocks, forming rock fulgurite. We demonstrate that a range of microstructural features indicative of high temperatures and pressures can form in fulgurites at the surface and in fractures up to several meters below the surface. In comparison to a granite reference sample collected from a borehole at a depth of 138 m, microstructures in both the surface and fracture fulgurite are characterized by: (i) the presence of glass, (ii) a phase transformation in K-feldspar with the presence of exsolution lamellae of plagioclase, and (iii) high residual stresses up to 1.5 GPa. Since this is the first time that fracturerelated fulgurite has been described, we also carried out a 1-D numerical model to investigate the processes by which these can form. The model shows that the electric current density in fractures up to 40 m from the landing point can be as high as that on the surface, providing an explanation for the occurrence of fracture-related fulgurites. Our work broadens the near-surface environments in which rock fulgurite has been reported, and provides a detailed description of microstructures that can be compared to those formed during other types of extreme metamorphic events., The research was supported by the Taiwan ROC (Republic of China) Ministry of Science and Technology (MOST 110-2116-M-008-002-MY2) and Earthquake-Disaster & Risk Evaluation and Management Center (E-DREaM) from the Ministry of Education (MOE) to Li-Wei Kuo. Dennis Brown acknowledges funding (PGC2018-094227-B-I00) from the Spanish Ministry of Science, Innovation, and Universities, as well as a Chaired Professor stipend from the Department of Earth Sciences at National Central University. Steven Smith acknowledges funding from the Marsden Fund, administered by the Royal Society of New Zealand (project UOO1829).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Identification of natural and anthropogenic signals in controlled source seismic experiments

  • Diaz, J.
  • DeFelipe, Irene
  • Ruiz, M. Teresa
  • Andrés, Juvenal
  • Ayarza, P.
  • Carbonell, Ramón
The analysis of the background noise in seismic networks has proved to be a powerful tool not only to acquire new insights on the crustal structure, but also to monitor different natural and anthropogenic processes. We show that data acquired during controlled source experiments can also be a valuable tool to monitor such processes, in particular when using high-density deployments. Data from a wide-angle reflection and refraction seismic profile in the central-northwest part of Iberia is used to identify signals related to aircrafts, road traffic, quarry blasts, wind blow, rainfall or thunders. The most prominent observations are those generated by a helicopter and an airplane flying following trajectories subparallel to the profile, which are tracked along 200 km with a spatial resolution of 350 m, hence providing an exceptional dataset. Other highlights are the observation of the Doppler effect on signals generated by moving cars and the high-density recording of acoustic waves generated by thunders. In addition to the intrinsic interest of identifying such signals, this contribution proves that it is worth inspecting the data acquired during seismic experiments beyond the time interval including the arrival of the seismic waves generated by the controlled source., The authors want to acknowledge all the staff that made possible the data acquisition, as well as the Geo3Bcn-CSIC LabSis Laboratory (http://labsis.geo3bcn.csic.es, last access, October 2021) for making their seismic station available for this experiment.This research has been supported by the Ministerio de Economía y Competitividad grant no. CGL2014-56548-P with additional support from the Ministerio de Ciencia, Innovación y Universidades grant no. RTI2018-095594-B-I00. PA is currently funded by projects SA084P20 from the Junta de Castilla y León, and by PGC2018-094227-B-I00 and PGC2018-093903-B-C21, from the Ministerio de Ciencia, Innovación y Universidades., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Lightning-induced features on granitic gneiss and its implication for rare lightning scars from the geological record

  • Chen, Tze-Yuan
  • Kuo, Li-Wei
  • Brown, Dennis
  • Si, Jialiang
  • Meng, Ting-Ju
  • Sheu, Hwo-Shuenn
  • Song, Yen-Fang
  • Yin, Gung-Chian
Cloud-to-ground lightning can cause high-temperature and high-pressure deformation features in rock at the strike point, forming fulgurite. Although cloud-to-ground lightning is a frequent phenomenon, rock fulgurites are rarely reported. Here, we present field, optical microscope, X-ray fluorescence, scanning and transmission electron microscope, in situ synchrotron projection X-ray microscopy and X-ray diffraction, and Raman data to investigate the formation and preservation of a recently formed rock fulgurite from Kinmen Island, Taiwan. In the field, the fulgurite is asymmetrically distributed on the surface over an ~ 12 m area. In detail, the fulgurite contains an opaque glassy layer comprised of quartz and feldspar clasts, voids, iron-rich spheres, and barite aggregates that overlies fractured quartz grains and feldspar grains with planar features. Secondary minerals found locally adhering to the glassy layer as greenish patches are mainly jarosite group minerals, which commonly form as a secondary hydrothermal alteration product. We interpret the jarosite to have formed during the solidification of melt in the presence of raindrops, suggesting the rapid alteration of glass and short preservation potential of rock fulgurite. Finally, we estimate the production ratio of fulgurite by calculating the energy required for fulgurite formation and that released to the ground by the lightning event. A calculated energy ratio of 0.026% is within the range of 10 to 10 of the lightning total energy delivered to the strike point. We suggest that the scarcity of rock fulgurite in the geological record may be due to both the low production possibility and rapid alteration., The research was supported by the Taiwan ROC (Republic of China) Ministry of Science and Technology (MOST 110–2116-M-008–002-MY2) and Earthquake-Disaster & Risk Evaluation and Management Center (E-DREaM) from the Ministry of Education (MOE) to Li-Wei Kuo. Dennis Brown acknowledges funding (PGC2018-094227-B-I00) from the Spanish Ministry of Science, Innovation, and Universities, as well as a Chaired Professor stipend from the Department of Earth Sciences at National Central University. Jialiang Si acknowledges funding from the National Natural Science Foundation of China (41872211)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Structure of the south-central Taiwan fold-and-thrust belt: Testing the viability of the model

  • Brown, Dennis
  • Alvarez-Marrón, Joaquina
  • Camanni, Giovanni
  • Biete, Cristina
  • Kuo-Chen, Hao
  • Wu, Y. M.
A structural model is developed for the south-central Taiwan fold-and-thrust belt that shows consistency across an array of data types and marks an important step forward in the consideration of geological hazards and risks. Although there is general agreement about the regional scale geology of Taiwan, there are considerable differences in the structural interpretations of its western fold-and-thrust belt. In this paper, we bring together results of our previous studies and add new data and data analyses to develop a consistent 3D structural model for the south-central Taiwan fold-and-thrust belt that can explain key aspects of the seismicity, GPS, and topography data. We interpret the fold-and-thrust belt to be a west-verging, imbricate thrust system developed above a single basal thrust that is breached by ENE-striking faults that are inherited from the continental margin. These breaching faults are associated with ENE-striking transverse zones in the fold-and-thrust belt that are marked by changes in stratigraphy, structural style, strike and dip of the basal thrust, and uplift of the stratigraphic contacts. Along the eastern flank of the fold-and-thrust belt, metamorphic basement rocks are involved in the thrusting. Shortening estimates range from 15 km to >25 km. Much of the seismicity is taking place beneath the basal thrust, in the basement, along the flanks of basement highs and lows where strike-slip and transpressive fault types are common. There are systematic changes in GPS displacement vectors and strain rates across the transverse zones. Topography is higher in areas where basement is involved in the thrusting. The proposed structural model has depth and along-strike consistency, and can explain aspects of the distribution of seismicity, faults types, GPS displacement vectors and strain rates, and topography of the study area, and can therefore be considered a viable model., This publication if part of the I+D+i project PGC2018-094227-B-I00 financed by MCIN/AEI/ https://doi.org/10.13039/501100011033 and the Generalitat de Catalunya, grant/award number AGAUR 2017SGR1022., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Evidence of Synorogenic Extension in the Upper-Middle Crust in Central Taiwan

  • Lozano Blanco, Olivia
  • Lund, Björn
  • Ayarza, Pui
  • Alvarez-Marrón, Joaquina
  • Brown, Dennis
  • Wu, Yih-Min
The active Taiwan mountain belt is located in a complex geodynamic setting that involves two subduction processes. To the northeast, the Philippine Sea Plate subducts northward beneath the Eurasian Plate at the Ryukyu Trench, while in the southwestern part, the Eurasian Plate subducts eastward under the Philippine Sea Plate, where it obliquely collides with the Luzon Volcanic Arc. The Taiwan thrust-and-fold belt is created as a result of this ongoing arc-continent collision. Regardless of the predominance of compression in the overall structure of the island, several studies have also reported normal faulting. This study aims to estimate the local and regional stress field using earthquake focal mechanism data to contribute to a better understanding of crustal deformation in the complex tectonic setting of Taiwan. Manually clustered earthquake focal mechanisms are inverted to obtain an estimate of the principal stress (¿1, ¿2, ¿3) orientations and the stress ratio (¿1-¿2)/(¿1-¿3), from which the direction of the maximum horizontal stress (SH) is calculated. The initial data set contains 11,587 earthquake focal mechanisms compiled from several sources dating between 1990 and 2020. All deep earthquakes in the Ryukyu subduction zone were removed from the data set. The Chi-Chi 1999 and other major earthquakes and aftershocks were also removed as they may reflect a distorted stress field. After preprocessing, a database consisting of 8,510 events with focal depths between 1-144 km and magnitudes ML=0.7-5.9 was used in the inversion. Depth division was performed in a regular 7 km grid up to 28 km depth, all events deeper than 28 km being considered in the same layer. Preliminary results show that, to the southwest, the notable clockwise rotation of SH from SW-NE to a W-E direction and a change in the fault type from strike-slip to reverse to the east coincides with the interaction between the ENE-striking reactivated inherited structures of the Eurasian continental margin and the NNE-striking thrust faults of the foreland thrust-and-fold belt. To the centre-east, results show normal faulting in the upper crust, which changes to reverse faulting with depth, suggesting that there is a stress transition at approximately 14 km. Beneath that depth, there is a general state of compression. Ongoing research aims at integrating these results with those of numerical modelling and with field data in an effort to understand the locus of deformation and the occurrence of extensional tectonics in compressional settings, here and in other mountains belts worldwide., This research is part of project PGC2018-094227-B-I00 funded by the Spanish Research Agency of the Ministry of Science and Innovation of Spain. Olivia Lozano acknowledges funding from the same agency through contract PRE2019-091431. Funding from SERA European Union H2020 INFRAIA-2016-2017 Agreement, 170522 is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Contemporaneous Stress in Taiwan: Evidence for Orogen-Parallel Extension and Lower Crustal Extrusion

  • Lozano Blanco, Olivia
  • Lund, Björn
  • Brown, Dennis
  • Alvarez-Marrón, Joaquina
  • Ayarza, Puy
  • Wu, Yih-Min
Syn-to late-orogenic extension caused by gravitational collapse is a process that has been documented in most orogens. In this paper, we investigate the contemporaneous stress field in Taiwan to examine syn-orogenic extensional faulting and the possible gravitational collapse modes by which it is taking place. We use a new, large, well-constrained, clustered earthquake focal mechanism data set from which we calculate the stress field (σ1, σ2, σ3), the direction of the maximum compressive horizontal stress (SH), and determine the most likely fault plane orientations and kinematics. Our results show that, in the upper 21 km of the crust, shearing, with lesser compression are the dominant stress regimes in the Western Foothills and Hsuehshan Range, resulting in a complex interaction of strike-slip (with transpression and transtension) and thrust faulting. Extension is predominately localized in the upper 14 km of the crust in the Central Range (CR), where it is roughly orogen-parallel. SH and the best-fit fault planes in the CR strike roughly NW-SE, at a high angle to the structural and topographic grain. At depths greater than 21 km, compression and shear, with transpression and minor extension are the dominant stress regimes throughout Taiwan. Along the eastern flank of the mountain belt, mixed compression and shear stress regimes at depths greater than 50 km are related to the Manila and Ryukyu subduction zones. Our new results allow, for the first time, to characterize an ongoing, large-scale, orogen-parallel extension in Taiwan related to lateral extrusion with free-boundary gravitational collapse., This publication is part of the I + D + i project PGC2018-094227-B-I00 financed by MCIN/AEI/10.13039/501100011033 and by FEDER European Union. Olivia Lozano acknowledges Ph.D. funding from contract PRE2019-091431 financed by MCIN/AEI/10.13039/501100011033 and by “ESF Investing in your future.”, Peer reviewed