Pasar al contenido principal

TECNOLOGIAS AVANZADAS BASADAS EN EL ANALISIS DEL FLUJO DE DISPERSION EN REGIMEN TRANSITORIO PARA EL DIAGNOSTICO PRECOZ DE ANOMALIAS ELECTROMECANICAS EN MOTORES ELECTRICOS

PGC2018-095747-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 19
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detection of Uniform Gearbox Wear in Induction Motors based on the Analysis of Stray Flux Signals through Statistical Time-Domain Features and Dimensionality Reduction Techniques

  • Zamudio-Ramirez, Israel
  • Saucedo-Dorantes, Juan Jose
  • Osornio-Rios, Roque Alfredo
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Dunai, Larisa|||0000-0002-5076-0695
[EN] Gearboxes are core elements in power transmission systems, although gearboxes are reliable and high-efficiency components, the occurrence of different faults is frequent since they are often subjected to adverse operating conditions. Classical gearbox condition monitoring approaches are based on the analysis of vibration and current motor signals and rely on the identification of specific fault-related frequency patterns. In this regard, this paper proposes a novel diagnosis methodology based on the analysis of stray flux signals for detecting uniform wear in the gear teeth. The proposed methodology is based on the processing of the stray flux signals through feature calculation and extraction stages that lead to a high-performance signal characterization by estimating a set of statistical time domain-based features and then reducing the dimensionally by means of the PCA and LDA techniques. Additionally, an automatic fault diagnosis is achieved through a Neural Network-based classifier for the detection and identification of uniform wear in a gearbox. The obtained results prove the potential of the proposal for its incorporation in condition maintenance programs in the industry, becoming an excellent alternative to classical approaches., This work was supported in part by Spanish "Ministerio de Ciencia Innovación y Universidades" and FEDER Program in "Proyectos de I+D de Generación de Conocimiento del Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento" under Grant PGC2018-095747-B-I00 and in part by Consejo Nacional de Ciencia y Tecnología under Grant 652815. Paper 2021-EMC-1436.R1, presented at the IEEE Energy Conversion Congress and Exposition, Vancouver, BC, Canada, Oct. 10-14, 2021, and approved for publication in the IEEE TRANSACTIONS ON INDUSTRY APPLICATIONS by the Electric Machines Committee of the IEEE Industry Applications Society.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Smart-Sensors to Estimate Insulation Health in Induction Motors via Analysis of Stray Flux

  • Zamudio-Ramírez, Israel
  • Osornio-Rios, Roque Alfredo
  • Trejo-Hernandez, Miguel
  • Romero-Troncoso, Rene de Jesus
  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] Induction motors (IMs) are essential components in industrial applications. These motors have to perform numerous tasks under a wide variety of conditions, which affects performance and reliability and gradually brings faults and efficiency losses over time. Nowadays, the industrial sector demands the necessary integration of smart-sensors to effectively diagnose faults in these kinds of motors before faults can occur. One of the most frequent causes of failure in IMs is the degradation of turn insulation in windings. If this anomaly is present, an electric motor can keep working with apparent normality, but factors such as the efficiency of energy consumption and mechanical reliability may be reduced considerably. Furthermore, if not detected at an early stage, this degradation could lead to the breakdown of the insulation system, which could in turn cause catastrophic and irreversible failure to the electrical machine. This paper proposes a novel methodology and its application in a smart-sensor to detect and estimate the healthiness of the winding insulation in IMs. This methodology relies on the analysis of the external magnetic field captured by a coil sensor by applying suitable time-frequency decomposition (TFD) tools. The discrete wavelet transform (DWT) is used to decompose the signal into different approximation and detail coefficients as a pre-processing stage to isolate the studied fault. Then, due to the importance of diagnosing stator winding insulation faults during motor operation at an early stage, this proposal introduces an indicator based on wavelet entropy (WE), a single parameter capable of performing an efficient diagnosis. A smart-sensor is able to estimate winding insulation degradation in IMs using two inexpensive, reliable, and noninvasive primary sensors: a coil sensor and an E-type thermocouple sensor. The utility of these sensors is demonstrated through the results obtained from analyzing six similar IMs with differently induced severity faults., We would like to thank Consejo Nacional de Ciencia y Tecnologia (CONACYT) for providing economic support in this work (scholarship). Finally, thanks to the next projects: SEP-CONACYT 222453-2013, and FOFIUAQ-FIN201812. This wok was also funded by Spanish 'Ministerio de Ciencia Innovacion y Universidades' and FEDER program in the framework of the 'Proyectos de I+D de Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento' (ref: PGC2018-095747-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Electrical monitoring under transient conditions: a new paradigm in electric motors predictive maintenance

  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] Electric motors condition monitoring is a field of paramount importance for industry. In recent decades, there has been a continuous effort to investigate on new techniques and methods that are able to determine the health of these machines with high accuracy and reliability. Classical methods based on the analysis of diverse machine quantities under stationary condition are being replaced by modern methodologies that are adapted to any operation regime of the machine (including transients). These new methods (especially those based on motor startup signal monitoring), that imply the use of advanced signal processing tools, have shown a great potential and have provided spectacular advantages versus conventional approaches enabling, among other facts, a much more reliable determination of the machine health. This paper reviews the background of this recent condition monitoring trend and shows the advantages of this new approach, with regards to its application to the analysis of electrical quantities. Examples referred to its application to real motors operating in industry are included, proving the huge potential of the transient-based approach and its benefits versus conventional methods., This research was funded by by the Spanish 'Ministerio de Ciencia Innovacion y Universidades' and FEDER program in the framework of the 'Proyectos de I + D de Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I + D + i, Subprograma Estatal de Generacion de Conocimiento' (ref: PGC2018-095747-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Automatic diagnosis of electromechanical faults in induction motors based on the transient analysis of the stray flux via MUSIC methods

  • Zamudio-Ramírez, Israel
  • Ramirez-Núñez, Juan Angel
  • Osornio-Rios, Roque A.
  • Razik, Hubert
  • Romero-Troncoso, Rene de Jesus
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Quijano-Lopez, Alfredo|||0000-0001-7916-8698
[EN] In the induction motor predictive maintenance area, there is a continuous search for new techniques and methods that can provide additional information for a more reliable determination of the motor condition. In this context, the analysis of the stray flux has drawn the interest of many researchers. The simplicity, low cost and potential of this technique makes it attractive for complementing the diagnosis provided by other well-established methods. More specifically, the study of this quantity under the starting has been recently proposed as a valuable tool for the diagnosis of certain electromechanical faults. Despite this fact, the research in this approach is still incipient and the employed signal processing tools must be still optimized for a better visualization of the fault components. Moreover, the development of advanced algorithms that enable the automatic identification of the resulting transient patterns is another crucial target within this area. This article presents an advanced algorithm based on the combined application of MUSIC and neural networks that enables the automatic identification of the time-frequency patterns created by the stray flux fault components under starting as well as the subsequent determination of the fault severity level. Two faults are considered in the work: rotor problems and misalignments. Also, different positions of the external coil sensor are studied. The results prove the potential of the intelligent algorithm for the reliable diagnosis of electromechanical faults., This work was supported in part by the Spanish "Ministerio de Ciencia Innovacion y Universidades" and in part by FEDER program in the "Proyectos de I+D de Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento" (PGC2018-095747-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Stray Flux Analysis for the Detection and Severity Categorization of Rotor Failures in Induction Machines Driven by Soft-Starters

  • Biot-Monterde, Vicente|||0000-0002-8229-7447
  • Navarro-Navarro, Ángela|||0000-0001-9963-8204
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Razik, Hubert
[EN] The condition monitoring of induction motors (IM), is an important concern for industry due to the widespread use of these machines. Magnetic Flux Analysis, has been proven to be a reliable method of diagnosing these motors. Among the IM types, squirrel-cage motors (SCIM) are one of the most commonly used. In many industrial applications, the IM are driven by different types of starters, quite often by soft-starters. Despite rotor damages are more prone to occur in line-started motors, these kind of failures have been also reported in those ones driven by soft-starters. Related to this, the use of these type of starters may introduce some harmonic components, that could veil the magnetic flux signature of the different rotor faults. So, the aim of this study is to confirm if the Stray Flux Analysis technique maintains its reliability in these cases. Thus, this article presents the results of soft-started induction motors start-up tests, both in healthy and faulty motors. The fault components are detected by analyzing the stray flux during the starting and the study is complemented by analyzing the stray flux during the steady-state. In addition to the failure patterns, numerical indicators have been found so the identification of the failures is not only qualitative, but also quantitative. The results confirm the potential of the technique for detecting electromechanical failures in soft-started SCIMs., This research was founded by the Spanish Ministerio de Ciencia Innovación y Universidades and FEDER program in the framework of the Proyectos de I+D de Generación de Conocimiento del Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i, Subprograma Estatal de Generación de Conocimiento grant number: PGC2018-095747-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detection of adjacent and non-adjacent bar breakages in induction motors via convolutional analysis of sound signals

  • Iglesias Martínez, Miguel Enrique
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Conejero, J. Alberto|||0000-0003-3681-7533
[EN] We apply power spectral analysis based on covariance function and spectral subtraction to detect adjacent and non-adjacent bar breakages. We get a spectral pattern when the signal presents one or various broken bars, independent of the relative position of the bar breakages. The proposed algorithm gives satisfactory results about detectability compared to some previous researches. Additionally, we also present illustrations of faults and signal to noise in the noise reduction stage., This research was funded by MEC, grant number MTM 2016-7963-P; Spanish `Ministerio de Ciencia Innovacion y Universidades' and FEDER program in the framework of the `Proyectos de I +D de Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento' (ref: PGC2018-095747-B-I00); and Generalitat Valenciana, Conselleria de Innovacion, Universidades, Ciencia y Sociedad Digital, (project AICO/019/224).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

System for Tool-Wear Condition Monitoring in CNC Machines under Variations of Cutting Parameter Based on Fusion Stray Flux-Current Processing

  • Jaen-Cuellar, Arturo Yosimar
  • Osornio-Ríos, Roque Alfredo
  • Trejo-Hernández, Miguel
  • Zamudio-Ramírez, Israel
  • Díaz-Saldaña, Geovanni
  • Pacheco-Guerrero, José Pablo
  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] The computer numerical control (CNC) machine has recently taken a fundamental role in the manufacturing industry, which is primordial for the economic development of many countries. Current high quality production standards, along with the requirement for maximum economic benefits demand the use of tool condition monitoring (TCM) systems able to monitor and diagnose cutting tool wearing. Current TCM methodologies mainly rely on vibration signals, cutting force signals, acoustic emission (AE) signals, which have the common drawback of requiring the in-stallation of sensors near the working area, a factor that limits their application under practical terms. Moreover, as machining processes require the optimal tuning of cutting parameters, novel methodologies must be able to perform the diagnosis under a variation of cutting parameters. This paper proposes a novel non-invasive method capable to automatically diagnose cutting tool wearing in CNC machines under the variation of cutting speed, and feed rate cutting parameters. The proposal relies on the sensor information fusion of spindle-motor stray flux and current signals by means of statistical and non-statistical time-domain parameters, which are then reduced by means of a linear discriminant analysis (LDA), and then a feed-forward neural network is used to automatically classify the level of wear on the cutting tool. The proposal is validated with a Fanuc Oi mate Computer Numeric Control (CNC) turning machine for three different cutting tool wearing levels and different cutting speed, and feed rate values., This work was supported by the Spanish 'Ministerio de Ciencia Innovacion y Universidades' and FEDER program in the framework of the 'Proyectos de I + D de Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I + D + i, Subprograma Estatal de Generacion de Conocimiento' (ref: PGC2018-095747-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the Damper Condition in Synchronous Motors through the Analysis of the Transient Stray Fluxes and Currents considering the Effect of the Remanent Magnetism

  • Castro-Coronado, Habib
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Quijano-Lopez, Alfredo|||0000-0001-7916-8698
  • Llovera Segovia, Pedro|||0000-0001-6569-5710
  • Fuster Roig, Vicente Luis|||0000-0002-2428-9203
  • Serrano Iribarnegaray, Luís|||0000-0002-6821-5265
  • Dunai, Larisa|||0000-0002-5076-0695
[EN] This paper proposes the qualitative and quantitative analysis of stray-flux and current data under starting to detect damper faults in cylindrical rotor synchronous machines. These machines are typically employed in high power applications and their possible outages may imply huge costs for the industries or plants where they operate. The damper cage is a critical part of these machines and a potential source of catastrophic failures. However, few research works have provided feasible alternatives to monitor the condition of such element. This work analyses the viability of analyzing the electromotive force signals induced by the stray-flux in external coil sensors as well as current signals under starting to diagnose damper faults. The results obtained with laboratory machines with different levels of damper damage show that the analyses of those signals can provide very useful information for determining how the damper degrades over time. Moreover, the paper studies the effect of the remanent magnetism over the viability of the approaches and provides solutions to overcome this problem. The conclusions are valuable for field engineers since, nowadays, there are few available solutions that allow monitoring the condition of such element without motor disassembly., This work was supported in part by the Spanish "Ministerio de Ciencia Innovacion y Universidades" and in part by the FEDER program in the framework of the "Proyectos de I+D de Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento" (ref: PGC2018-095747-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Gradual Wear Diagnosis of Outer-race Rolling Bearing Faults through Artificial Intelligence Methods and Stray Flux Signals

  • Zamudio-Ramirez, Israel
  • Osornio-Rios, Roque A.
  • Cureño-Osornio, Jonathan
  • Saucedo-Dorantes, Juan-Jose
  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] Electric motors have been widely used as fundamental elements for driving kinematic chains on mechatronic systems, which are very important components for the proper operation of several industrial applications. Although electric motors are very robust and efficient machines, they are prone to suffer from different faults. One of the most frequent causes of failure is due to a degradation on the bearings. This fault has commonly been diagnosed at advanced stages by means of vibration and current signals. Since low-amplitude fault-related signals are typically obtained, the diagnosis of faults at incipient stages turns out to be a challenging task. In this context, it is desired to develop non-invasive techniques able to diagnose bearing faults at early stages, enabling to achieve adequate maintenance actions. This paper presents a non-invasive gradual wear diagnosis method for bearing outer-race faults. The proposal relies on the application of a linear discriminant analysis (LDA) to statistical and Katz¿s fractal dimension features obtained from stray flux signals, and then an automatic classification is performed by means of a feed-forward neural network (FFNN). The results obtained demonstrates the effectiveness of the proposed method, which is validated on a kinematic chain (composed by a 0.746 KW induction motor, a belt and pulleys transmission system and an alternator as a load) under several operation conditions: healthy condition, 1 mm, 2 mm, 3 mm, 4 mm, and 5 mm hole diameter on the bearing outer race, and 60 Hz, 50 Hz, 15 Hz and 5 Hz power supply frequencies., This work was supported by the Spanish Ministerio de Ciencia Innovación y Universidades and FEDER program in the framework of the `Proyectos de I+D de Generación de Conocimiento del Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i, Subprograma Estatal de Generación de Conocimiento¿ (ref: PGC2018-095747-B-I00), and Consejo Nacional de Ciencia y Tecnología (CONACyT) under scholarship 652815.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Savior: A Reliable Fault Resilient Router Architecture for Network-on-Chip

  • Hussain, Ayaz
  • Irfan, Muhammad
  • Baloch, Naveed Khan
  • Draz, Umar
  • Ali, Tariq
  • Glowacz, Adam
  • Dunai, Larisa|||0000-0002-5076-0695
  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] The router plays an important role in communication among different processing cores in on-chip networks. Technology scaling on one hand has enabled the designers to integrate multiple processing components on a single chip; on the other hand, it becomes the reason for faults. A generic router consists of the buffers and pipeline stages. A single fault may result in an undesirable situation of degraded performance or a whole chip may stop working. Therefore, it is necessary to provide permanent fault tolerance to all the components of the router. In this paper, we propose a mechanism that can tolerate permanent faults that occur in the router. We exploit the fault-tolerant techniques of resource sharing and paring between components for the input port unit and routing computation (RC) unit, the resource borrowing for virtual channel allocator (VA) and multiple paths for switch allocator (SA) and crossbar (XB). The experimental results and analysis show that the proposed mechanism enhances the reliability of the router architecture towards permanent faults at the cost of 29% area overhead. The proposed router architecture achieves the highest Silicon Protection Factor (SPF) metric, which is 24.4 as compared to the state-of-the-art fault-tolerant architectures. It incurs an increase in latency for SPLASH2 and PARSEC benchmark traffics, which is minimal as compared to the baseline router., This work was supported by the Spanish 'Ministerio de Ciencia Innovacion y Universidades' and FEDER program in the framework of the 'Proyectos de I+D d Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento' (ref: PGC2018-095747-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detection of Winding Asymmetries in Wound-Rotor Induction Motors via Transient Analysis of the External Magnetic Field

  • Zamudio-Ramírez, Israel
  • Osornio-Rios, Roque A.
  • Romero-Troncoso, Rene de Jesus
  • Razik, Hubert
  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] Over recent decades, the detection of faults in induction motors (IMs) has been mainly focused in cage motors due to their extensive use. However, in recent years, wound-rotor motors have received special attention because of their broad use as generators in wind turbine units, as well as in some large power applications in industrial plants. Some classical approaches perform the detection of certain faults based on the fast Fourier transform analysis of the steady state current (motor current signature analysis); they have been lately complemented with new transient time-frequency-based techniques to avoid false alarms. Nonetheless, there is still a need to improve the already existing methods to overcome some of their remaining drawbacks and increase the reliability of the diagnostic. In this regard, emergent technologies are being explored, such as the analysis of stray flux at the vicinity of the motor, which has been proven to be a promising option to diagnose the motor condition. Recently, this technique has been applied to detect broken rotor bar failures and misalignments in cage motors, offering the advantage of being a noninvasive tool with simple implementation and even avoiding some drawbacks of well-established tools. However, the application of these techniques to wound rotor IMs (WRIMs) has not been studied. This article explores the analysis of the external magnetic field under the starting to detect rotor winding asymmetry defects in WRIMs by using advanced signal processing techniques. Moreover, a new fault indicator based on this quantity is introduced, comparing different levels of fault and demonstrating the potential of this technique to quantify and monitor rotor winding asymmetries in WRIMs., This work was supported by the Spanish "Ministerio de Ciencia Innovacion y Universidades" and Fondo Europeo de Desarrollo Regional program in the framework of the "Proyectos de I+D de Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento" under Grant PGC2018-095747-B-I00.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detection of nonadjacent rotor faults in induction motors via spectral subtraction and autocorrelation of stray flux signals

  • Iglesias-Martínez, Miguel Enrique
  • Fernández de Córdoba, Pedro|||0000-0002-0347-7280
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Conejero, J. Alberto|||0000-0003-3681-7533
[EN] In this paper, statistical signal processing techniques are applied to electromotive force signals captured in external coil sensors for adjacent and nonadjacent broken bars detection in induction motors. An algorithm based on spectral subtraction analysis is applied for broken bar identification, independent of the relative position of the bar breakages. Moreover, power spectrum analyses enable the discrimination between healthy and faulty conditions. The results obtained with experimental data prove that the proposed approach provides good results for fault detectability. Moreover, the identification of the faults, and the signal correlation indicator to prove the results are also presented for different positions of the flux sensor., This work was supported in part by MEC under Project MTM 2016-7963-P and in part by the Spanish 'Ministerio de Ciencia Innovacion y Universidades' and FEDER program in the framework of the 'Proyectos de I+D de Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento' (ref: PGC2018-095747-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Magnetic Flux Analysis for the Condition Monitoring of Electric Machines: A Review

  • Zamudio-Ramírez, Israel
  • Osornio-Rios, Roque Alfredo
  • Razik, Hubert
  • Romero-Troncoso, Rene de Jesus
  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] Magnetic flux analysis is a condition monitoring technique that is drawing the interest of many researchers and motor manufacturers. The great enhancements and reduction in the costs and dimensions of the required sensors, the development of advanced signal processing techniques that are suitable for flux data analysis, along with other inherent advantages provided by this technology are relevant aspects that have allowed the proliferation of flux-based techniques. This paper reviews the most recent scientific contributions related to the development and application of flux-based methods for the monitoring of rotating electric machines. Particularly, aspects related to the main sensors used to acquire magnetic flux signals as well as the leading signal processing and classification techniques are commented. The discussion is focused on the diagnosis of different types of faults in the most common rotating electric machines used in industry, namely: squirrel cage induction machines (SCIM), wound rotor induction machines (WRIM), permanent magnet machines (PMM) and wound field synchronous machines (WFSM). A critical insight of the techniques developed in the area is provided and several open challenges are also discussed., This work was supported by the Spanish 'Ministerio de Ciencia Innovación y Universidades' and FEDER program in the framework of the "Proyectos de I+D de Generación de Conocimiento del Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento" reference PGC2018-095747-B-I00 and by the Consejo Nacional de Ciencia y Tecnología under CONACyT Scholarship with key code 2019-000037-02NACF. Paper no. TII-20-5308.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Advances in Fault Condition Monitoring for Solar Photovoltaic and Wind Turbine Energy Generation: A Review

  • Jaen-Cuellar, Arturo Y.
  • Elvira-Ortiz, David A.
  • Osornio-Rios, Roque A.
  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] Renewable energy-based power generation technologies are becoming more and more popular since they represent alternative solutions to the recent economic and environmental problems that modern society is facing. In this sense, the most widely spread applications for renewable energy generation are the solar photovoltaic and wind generation. Once installed, typically outside, the wind generators and photovoltaic panels suffer the environmental effects due to the weather conditions in the geographical location where they are placed. This situation, along with the normal operation of the systems, cause failures in their components, and on some occasions such problems could be difficult to identify and hence to fix. Thus, there are generated energy production stops bringing as consequence economical losses for investors. Therefore, it is important to develop strategies, schemes, and techniques that allow to perform a proper identification of faults in systems that introduce renewable generation, keeping energy production. In this work, an analysis of the most common faults that appear in wind and photovoltaic generation systems is presented. Moreover, the main techniques and strategies developed for the identification of such faults are discussed in order to address the advantages, drawbacks, and trends in the field of detection and classification of specific and combined faults. Due to the role played by wind and photovoltaic generation, this work aims to serve as a guide to properly select a monitoring strategy for a more reliable and efficient power grid. Additionally, this work will propose some prospective with views toward the existing areas of opportunity, e.g., system improvements, lacks in the fault detection, and tendency techniques that could be useful in solving them., This research was partially funded by Investigación Vinculada a la Atención de Problemas Nacionales 2021 FIN202108 project, and by the Spanish Ministerio de Ciencia Innovación y Universidades; and by FEDER programa un they framework of the Proyectos de I+D de Generación de Conocimiento del Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D, Subprograma Estatal de Generación de Conocimiento; (ref: PGC2018‐095747‐B‐I00)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Current and Stray Flux Combined Analysis for the Automatic Detection of Rotor Faults in Soft-Started Induction Motors

  • Navarro-Navarro, Ángela|||0000-0001-9963-8204
  • Biot-Monterde, Vicente|||0000-0002-8229-7447
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Zamudio-Ramirez, Israel
  • Osornio-Rios, Roque A.
[EN] Induction motors (IMs) have been extensively used for driving a wide variety of processes in several industries. Their excellent performance, capabilities and robustness explain their extensive use in several industrial applications. However, despite their robustness, IMs are susceptible to failure, with broken rotor bars (BRB) being one of the potential faults. These types of faults usually occur due to the high current amplitude flowing in the bars during the starting transient. Currently, soft-starters have been used in order to reduce the negative effects and stresses developed during the starting. However, the addition of these devices makes the fault diagnosis a complex and sometimes erratic task, since the typical fault-related patterns evolutions are usually irregular, depending on particular aspects that may change according to the technology implemented by the soft-starter. This paper proposes a novel methodology for the automatic detection of BRB in IMs under the influence of soft-starters. The proposal relies on the combined analysis of current and stray flux signals by means of suitable indicators proposed here, and their fusion through a linear discriminant analysis (LDA). Finally, the LDA output is used to train a feed-forward neural network (FFNN) to automatically detect the severity of the failure, namely: a healthy motor, one broken rotor bar, and two broken rotor bars. The proposal is validated under a testbench consisting of a kinematic chain driven by a 1.1 kW IM and using four different models of soft-starters. The obtained results demonstrate the capabilities of the proposal, obtaining a correct classification rate (94.4% for the worst case)., This work was supported by the Spanish Ministerio de Ciencia Innovación y Universidades and FEDER program in the framework of the Proyectos de I+D de Generación de Conocimiento del Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i, Subprograma Estatal de Generación de Conocimiento (ref: PGC2018-095747-B-I00). The authors would like to thank Consejo Nacional de Ciencia y Tecnología (CONACyT) under scholarship 652815.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Power Quality Monitoring Strategy Based on an Optimized Multi-domain Feature Selection for the Detection and Classification of Disturbances in Wind Generators

  • Elvira-Ortiz, David A.
  • Saucedo-Dorantes, Juan J.
  • Osornio-Rios, Roque A.
  • Morinigo-Sotelo, Daniel
  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] Wind generation is an essential power supply in the last time, as a renewable option. These wind generators are integrated with electrical machines that require correct functionality. However, the increasing use of non-linear loads introduces undesired disturbances that may compromise the integrity of the electrical machines inside the wind generator. Therefore, this work proposes a 5-step methodology for power quality disturbance detection in grids with injection of wind farm energy. First, a database with synthetic signals is generated to be used in the training process. Then, a multi-domain feature estimation is carried out. To reduce the problem dimensionality, the features that provide redundant information are eliminated through an optimized feature selec-tion performed by means of a genetic algorithm and the principal component analysis. Addi-tionally, each one of the characteristic feature matrices of every considered condition is modeled through a specific self-organizing map neuron grid so they can be shown in a 2-D representation. Since the SOM model provides a pattern of the behavior of every disturbance, they are used as inputs of the classifier based in a softmax layer neural network that performs the power quality disturbance detection of six different conditions: healthy or normal, sag or swell voltages, tran-sients, voltage fluctuations and harmonic distortion. Thus, the proposed method is validated using a set of synthetic signals and then it is tested using two different sets of real signals from an IEEE workgroup and from a wind park located in Spain., This research was partially funded by FONDEC-UAQ 2020 FIN202011 project. It was also supported by the Spanish `Ministerio de Ciencia Innovacion y Universidades' and FEDER program in the framework of the `Proyectos de I+D de Generacion de Conocimiento del Programa Estatal de Generacion de Conocimiento y Fortalecimiento Cientifico y Tecnologico del Sistema de I+D+i, Subprograma Estatal de Generacion de Conocimiento' (ref: PGC2018-095747-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Tracking of high-order stray-flux harmonics under starting for the detection of winding asymmetries in wound-rotor induction motors

  • Zamudio-Ramirez, Israel
  • Osornio-Rios, Roque A.
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Dunai, Larisa|||0000-0002-5076-0695
[EN] Wound rotor induction motors (WRIM) are widely used in a vast number of high output power industrial applications due to their capability of reaching high start torques while maintaining low inrush currents. Nonetheless, these machines are very prone to require early maintenance, and the possibility of presenting rotor winding asymmetry failures is high due to their more complex rotor circuit. Although some recent works have proposed techniques that overcome the drawbacks of conventional methods, an additional research effort for the development of alternative approaches able to enhance their performance and reliability is desirable. In this work, a new method for the diagnosis of rotor asymmetries in WRIM is presented. The proposed methodology is based on a feed-forward neural network (FFNN) feed by suitable fault severity indicators, which rely on the maximum energy density of higher order harmonics (amplified by the failure) at strategic regions of the time-frequency maps obtained from stray flux signals under startup transient. Experimental results for three different levels of rotor asymmetries in a 11 KW WRIM prove the reliability of the enhanced proposed system in comparison to conventional approaches that only rely on the main sideband fault-harmonic amplitudes., The authors would like to thank Consejo Nacional de Ciencia y Tecnologia, CONACyT under scholarship 652815.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Detection of Field Winding Faults in Synchronous Motors via Analysis of Transient Stray Fluxes and Currents

  • Tian, P.
  • Platero, C.A.
  • J. Antonino-Daviu|||0000-0003-1898-2228
  • Dunai, Larisa|||0000-0002-5076-0695
[EN] The detection of rotor failures in synchronous motors is a matter of primordial interest in many industrial sites where these machines are critical assets. However, due to the particular operation of these motors, most conventional techniques relying on steady-state analysis, commonly used in other electric machines, are not applicable to such motors. In this context, it has been recently proven that the analysis of different quantities under transient operation of the motor and, more specifically, under motor starting can provide crucial information for the diagnosis of many faults. This work proposes the time-frequency analysis of stray fluxes and currents to detect field winding faults in synchronous motors. The potential consequences of this fault can be catastrophic for the motor integrity, so that the detection of its presence in its early stages can be of critical importance for the industry. The results included in this paper prove the usefulness of the transient analysis of such non-invasive quantities not only to detect the presence of the field winding fault but also to set a starting point to determine its severity., This work was supported by the Spanish Ministerio de Ciencia Innovación y Universidades and FEDER program in the framework of the Proyectos de I+D de Generación de Conocimiento del Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i, Subprograma Estatal de Generación de Conocimiento (ref: PGC2018-095747-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Condition Monitoring Method for the Detection of Fault Graduality in Outer Race Bearing Based on Vibration-Current Fusion, Statistical Features and Neural Network

  • Saucedo-Dorantes, Juan Jose
  • Zamudio-Ramirez, Israel
  • Cureño-Osornio, Jonathan
  • Osornio-Rios, Roque Alfredo
  • J. Antonino-Daviu|||0000-0003-1898-2228
[EN] Bearings are the elements that allow the rotatory movement in induction motors and the fault occurrence in these elements are due to excessive working conditions. In induction motors, elec-trical erosion remains the most common phenomenon that damages bearings, leading to incipient faults that gradually increase to irreparable damages. Thus, condition monitoring strategies ca-pable of assessing bearing fault severities are mandatory to overcome this critical issue. The contribution of this work lies in the proposal of a condition monitoring strategy that is focused on the analysis and identification of different fault severities of the outer race bearing fault in an induction motor. The proposed approach is supported by fusion information of different physical magnitudes and the use of Machine Learning and Artificial Intelligence. An important aspect of this proposal is the calculation of a hybrid-set of statistical features that are obtained to characterize vibration and stator current signals by its processing through domain analysis, i.e., time-domain and frequency-domain; also, the fusion of information of both signals by means of the Linear Discriminant Analysis is important due to the most discriminative and meaningful information is retained resulting in a high-performance condition characterization. Besides, a Neural Net-work-based classifier allows validating the effectiveness of fusion information from different physical magnitudes to face the diagnosis of multiple fault severities that appear in the bearing outer race. The method is validated under an experimental data set that includes information re-lated to a healthy condition and five different severities that appear in the outer race of bearings., This work was supported by the Spanish `Ministerio de Ciencia Innovación y Universidades and FEDER program in the framework of the `Proyectos de I+D de Generación de Conocimiento del Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i, Subprograma Estatal de Generación de Conocimiento (ref: PGC2018-095747-B-I00), and Consejo Nacional de Ciencia y Tecnología (CONACyT) under scholarship 652815.