Pasar al contenido principal

REDESCUBRIMIENTO IN SILICO DE MECANISMOS ASISTIDOS DUALES DE LA CATALISIS MONOMETALICA: HACIA EL TRABAJO EN CONDICIONES SUAVES

PGC2018-097722-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de Generación de Conocimiento y Fortalecimiento Científico y Tecnológico del Sistema de I+D+i
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D (Excelencia / Generación de Conocimiento)
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 34
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Predictive catalysis in olefin metathesis with Ru-based catalysts with annulated C60 fullerenes in the N-heterocyclic carbenes

  • Martínez, Juan Pablo
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
Predictive catalysis must be the tool that does not replace experiments, but acts as a selective agent, so that synthetic strategies of maximum profitability are used in the laboratory in a surgical way. Here, nanotechnology has been mixed with olefin metathesis from homogeneous Ru-NHC catalysts, specifically annulating a C60 fullerene to the NHC ligand. Based on results with the C60 in the backbone, a sterile change with respect to the catalysis of the metal center, an attempt has been made to bring C60 closer to the metal, by attaching it to one of the two C-N bonds of the imidazole group of the SIMes (1,3-bis(2,4,6-trimethylphenyl)imidazolin-2-ylidene) ligand (reference NHC ligand of the 2nd generation Grubbs catalysts) to increase the steric pressure of C60 in the first sphere of reactivity of the metal. The DFT calculated thermodynamics and the kinetics of SIMes-derived systems show that they are efficient catalysts for olefin metathesis, We are grateful to the Ministerio de Economía y Competitividad (MINECO) of Spain for projects CTQ2017-85341-P and PGC2018-097722-B-I00; Generalitat de Catalunya for project 2017SGR39, Xarxa de Referència en Química Teòrica i Computacional, and ICREA Academia prize 2019 to A. P
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Selective absorption of H2S and CO2 by azole based protic ionic liquids: A combined Density Functional Theory and Molecular Dynamic simulations study

  • Shaikh, Abdul Rajjak
  • Posada-Pérez, Sergio
  • Brotons Rufes, Artur
  • Pajski, Jason J.
  • Kumar, Gulshan
  • Hussain, Vajiha
  • Mateen, Ayesha
  • Poater Teixidor, Albert
  • Solà i Puig, Miquel
  • Chawla, Mohit
  • Cavallo, Luigi
To achieve efficient carbon capture, utilization, and storage, it is necessary to separate CO2 from the atmosphere. In an attempt to move towards selective separation of CO2, some of us have shown that ionic liquids (ILs) can be efficiently used to separate CO2 and H2S from CH4 and H2O. In the present work, we perform Density Functional Theory and Molecular dynamics simulations for four different ILs: [DBNH][1,2,3-triaz], [DBNH][1,2,4-triaz], [DBUH][1,2,3-triaz] and [DBUH][1,2,4-triaz]. DFT calculations have unveiled the additional selective character of H2S with respect to CO2. Whereas CO2 binds to the nitrogen of the anionic moiety of the IL forming a new C-N bond, H2S transfers a proton to one of the nitrogen atoms of the IL with the consequent generation of a HS- anion. Radial distribution function analysis shows the presence of hydrogen bonds between cation and anion in neat ILs as well in presence of gases. Hydrogen bond analysis shows higher number of hydrogen bonds in the ILs between cation and the [1,2,3-triaz] anion as compared to [1,2,4-triaz] anion. Molecular dynamics simulations also show that these ionic liquids have stronger interaction with CO2 and H2S as compared to CH4. Overall, our study confirms the usage of studied ILs to efficiently capture CO2 and H2S, Authors would like to thank the King Abdullah University of Science and Technology (KAUST) Supercomputing Laboratory (KSL) for providing the necessary computational resources. A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019. S.P.P thanks the Spanish Ministerio de Ciencia e Innovación for Juan de la Cierva Formación fellowship (FJC2019-039623-I). M.S. and A.P. thank the Spanish MINECO for projects PID2020-13711GB-I00 and PGC2018-097722-BI00 and the Generalitat de Catalunya for project 2017SGR39. S.P-P., AB-R., J.J.P., G.K., V.H, A.M., thanks STEMskills Research and Education Lab Private Limited, India for providing supervision within the workshop ‘MD simulations of Ionic Liquids’
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Intramolecular interception of the remote position of vinylcarbene silver complex intermediates by C(sp3)−H bond insertion

  • Díaz Jiménez, Àlex
  • Monreal Corona, Roger
  • Poater Teixidor, Albert
  • Álvarez, María
  • Borrego, Elena
  • Pérez, Pedro J.
  • Caballero Bevia, Ana
  • Roglans i Ribas, Anna
  • Pla i Quintana, Anna
The trapping of the elusive vinylogous position of a vinyl carbene with an aliphatic C(sp3)−H bond has been achieved for the first time during a silver-catalyzed carbene/alkyne metathesis (CAM) process. A Tpx-containing silver complex first promotes the generation of a donor-acceptor silver carbene which triggers CAM, generating a subsequent donor-donor vinyl silver carbene species, which then undergoes a selective vinylogous C(sp3)−H bond insertion, leading to the synthesis of a new family of benzoazepines. Density functional theory (DFT) calculations unveil the reaction mechanism, which allows proposing that the C−H bond insertion reaction takes place in a stepwise manner, with the hydrogen shift being the rate determining step, We are grateful for financial support from the Ministerio de Ciencia e Innovación (PGC2018-097722-B-I00, PID2020-113797RB-C21 and PID2020-113711GB-I00 MCIN/AEI/10.13039/501100011033 and FPU grants to A.D.-J. and R.M.-C.) and the Generalitat de Catalunya (Project 2017-SGR-39). We also thank Junta de Andalucía (P18-1536) and Universidad de Huelva (P.O.Feder UHU202024). A.P.Q. and A.P. are Serra Húnter Fellows and A.P. thanks ICREA Academia Prize 2019. M.A. thanks Junta de Andalucia for a postdoctoral fellowship. E.B. thanks Cátedra Cepsa-Universidad de Huelva for financial support
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Diels-Alder cycloaddition of cyclopentadiene to C60 and Si60 and their endohedral Li+ counterparts

  • Charapale, Omkar
  • Poater i Teixidor, Jordi
  • Posada-Pérez, Sergio
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
Both silicon and carbon are elements located in the group 14 on the periodic table. Despite some similarities between these two elements, differences in reactivity are important, and whereas carbon is a central element in all known forms of life, silicon is barely found in biological systems. Here, we investigate the Diels-Alder cycloaddition reaction of cyclopentadiene (CP) and cyclopentasildiene (CPSi) with fullerenes C60, Li+@C60, Si60, and Li+@Si60 using Density Functional Theory (DFT) methods. The results reveal distinct kinetic and thermodynamic trends that govern reactivity and selectivity. For C60, the [6,6] pathway is kinetically and thermodynamically favored, whereas for Si60, the [5,6] pathway is preferred thermodynamically but not kinetically. Introduction of lithium cations increases the reactivity of both C60 and Si60. Energy decomposition analysis unveils the importance of the components of the interaction energy between the CPSi and the corresponding fullerenes. The findings provide insights into the interplay of electronic structure, substrate reactivity, and fullerene electrophilicity in cycloaddition reactions, A.P. is a Serra Hunter Fellow and ICREA Academia Prize 2019. We thank the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI/10.13039/50110001103), for projects PGC2018-097722-B-I00, PID2022-138861NB-I00, CEX2021-001202-M, PID2023-147424NB-I00, and RED2022-134939-T and the Generalitat de Catalunya for projects 2021SGR623 and 2021SGR442. S.E. thanks Generalitat de Catalunya for a FI PhD fellowship. We gratefully acknowledge the computer resources and technical support provided by the Barcelona Supercomputing Center (QHS2024-2-0018, QHS-2024-2-0028, and QHS-2024-2-0039) and the Consorci de Serveis Universitaris de Catalunya (CSUC), Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanism and optimization of ruthenium-catalyzed oxalamide synthesis using DFT

  • Monreal Corona, Roger
  • Joly, Nicolas
  • Gaillard, Sylvain
  • Renaud, Jean Luc
  • Valero, Marc
  • Mayolas, Enric
  • Pla i Quintana, Anna
  • Poater Teixidor, Albert
The oxalamide skeleton is a common structural motif in many biologically active molecules. These scaffolds can be synthesized via ruthenium pincer complex-catalyzed acceptorless dehydrogenative coupling of ethylene glycol and amines. In this study, we elucidate the mechanism of this oxalamide synthesis using density functional theory calculations. The rate-determining state is identified as the formation of molecular hydrogen following the oxidation of hydroxyacetamide to oxoacetamide. In predictive catalysis exercises, various modifications to the ruthenium pincer catalyst were investigated to assess their impact on the reactivity, A. P. and A. P.-Q. are Serra Húnter Fellows. A. P. received ICREA Academia Prize 2019. We thank the Ministerio de Economía y Competitividad (MINECO) for project PGC2018-097722-B-I00 (to A. P.) and Ministerio de Ciencia e Innovación for PID2020-113711GB-I00 MCIN/AEI/10.13039/501100011033 and PID2023-146849NB-I00 (to A. P.-Q.). We thank the Spanish Government for the predoctoral FPU20/00707 grant to R. M.-C. Financial support from the “Ministère de la Recherche et des Nouvelles Technologies”, Normandie Université, University of Caen Normandie, CNRS, “Région Normandie”, and the LABEX SynOrg (ANR-11-LABEX-0029) is acknowledged
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Molecular modelling aided catalyst design for PAO oils hydrofinishing

  • Mehdizadeh, Mohammadreza
  • Sadjadi, Samahe
  • Poater Teixidor, Albert
  • Mansouri, AmirMohammad
  • Bahri-Laleh, Naeimeh
In an attempt to move towards single metal atom catalysis, the functionalization of halloysite with amino-based ligands, where palladium atoms are complexed, is evaluated here as a pathway. The effect of the nature of the aromatic amine is first evaluated by DFT calculations to find the best one. From a series of ten aromatic amine ligands it is discernible which one has the most complexation capacity to the palladium species, analyzing the structural and electronic properties. After this small exercise of predictive catalysis, the catalyst of choice was then synthesized and characterized experimentally, in addition to conducting catalytic studies. Specifically, its efficiency for polyalphaolefin hydrogenation was investigated in different process conditions. Results demonstrate that the synthesized catalyst could promote polyalphaolefin hydrofinishing at optimum catalyst loading, reaction temperature and hydrogen pressure of 5 wt%, 130 °C and 7 bar, respectively to furnish the final product with bromine index of 55 Br/100 in 96 % yield., The authors appreciate support of Iran Polymer and Petrochemical Institute and University of Girona. A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019, and thanks the Spanish MINECO for project ref. PGC2018-097722-B-I00, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Double-Carrousel Mechanism for Mn-Catalyzed Dehydrogenative Amide Synthesis from Alcohols and Amines

  • Luque Urrutia, Jesús Antonio
  • Pèlachs, Tània
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
We study with density functional theory calculations the mechanism of the original example of a base-metal-catalyzed synthesis of amides from alcohols and amines. A preliminary proposal of the mechanism of this reaction was experimentally reported by Milstein and co-workers. Instead of the proposed reaction mechanism with a hemilabile pincer amine arm, our DFT calculations describe a facile protocol, where the catalyst only produces aldehydes from alcohols. Once formaldehyde is formed from methanol, it reacts with the amine to form a second alcohol. This new alcohol undergoes the same procedure as methanol and creates the desired amide through a double-carrousel mechanism. The rate-determining step in the catalytic aldehyde synthesis corresponds to the H2 formation. However, in the nonmetal-catalyzed part of the mechanism, the interaction of formaldehyde with the amine is also quite kinetically demanding, J.A.L.-U. thanks Universitat de Girona for an IFUdG2017 Ph.D. fellowship. A.P. is a Serra Húnter Fellow. A.P. and M.S. thank the Ministerio de Economía y Competitividad (MINECO) of Spain for projects PGC2018-097722-B-I00 and CTQ2017-85341-P; Generalitat de Catalunya for project 2017SGR39 and ICREA Academia prize 2019 to A.P.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Unveiling Oxygen Evolution Reaction on LiCoO2 cathode: Insights for the Development of High-Performance Aqueous Li-ion Batteries

  • George, Gibu
  • Poater Teixidor, Albert
  • Solà i Puig, Miquel
  • Posada-Pérez, Sergio
Aqueous lithium-ion batteries (ALIBs) are attracting significant attention as promising candidates for safe and sustainable energy storage systems. This paper delves into the crucial aspects of ALIB technology focusing on the interaction between LiCoO2 (lithium cobalt oxide) cathode material and water electrolytes, with a specific emphasis on the Oxygen Evolution Reaction (OER) process. Fundamental understanding of the electrochemical behavior of LiCoO2 in aqueous electrolytes is crucial for enhancing the performance, safety, and longevity of ALIBs using LiCoO2 as the cathode material. Through a comprehensive periodic density functional analysis of the LiCoO2-water at the cathode interface, the potential catalytic contributions to the OER mechanism of LiCoO2 are explored. The catalytic properties of LiCoO2 towards OER are investigated considering different steady states of the lowest energy surfaces of LiCoO2 and three different Li concentrations. Our results do not predict the formation of oxygen gas due to the expected large overpotentials, although the exergonic water decomposition to hydroxyl by means the first proton-electron transfer is predicted at equilibrium potential. This work contributes to the fundamental understanding of LiCoO2 as cathode for aqueous Li-ion batteries, reporting the pros and cons of one of the most common cathode materials for traditional non-aqueous batteries, S.P.-P.appreciates the economic support of Marie Curie fellowship (H2020-MSCA-IF-2020-101020330). A.P. is a SerraHúnter Fellow and received the ICREA Academia Prize 2019. M.S. and A.P. thank the Spanish MINECO for projects PID2020-113711GB-I00 and PGC2018-097722-B-I00, and the Generalitat de Catalunya for project 2021 SGR 623. Computational time at the MARENOSTRUM supercomputer has been provided by the Barcelona Supercomputing Centre through a grant fromRed Española de Supercomputación, project (QHS-2022-3-0002), Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Guidelines for Tuning the Excited State Hückel-Baird Hybrid Aromatic Character of Pro-Aromatic Quinoidal Compounds

  • Escayola Gordils, Sílvia
  • Tonnelé, Claire
  • Matito i Gras, Eduard
  • Poater Teixidor, Albert
  • Ottosson, Henrik
  • Solà i Puig, Miquel
  • Casanova, David
Pro-aromatic molecules have higher-energy diradicaloid states that are significantly influenced by resonance structures in which conjugated rings take on Hückel-aromatic character. Recently, it has been argued that there are also pro-aromatic molecules that adopt central units with 4npi-electron Baird-aromatic character in the T1 state, although detailed analysis suggests that these compounds are better labelled as T1 Hückel-Baird hybrid molecules where Hückel-aromaticity dominates. Herein, we consider a series of symmetrically substituted conjugated rings with potential Baird aromaticity in the lowest excited triplet and singlet states. Our computational results allow us to establish general guidelines for the rational design of molecules with excited state Hückel/Baird aromaticity in pro-aromatic quinoidal compounds. We found two main strategies to promote high Baird aromatic character: (i) anionic and small conjugated rings with electron donating groups as substituents and small exocyclic groups with electron withdrawing substituents, or (ii) electron deficient conjugated rings with exocyclic electron-donor substitution, The authors thank the Ministerio de Economía y Competitividad of Spain (projects PGC2018-097722-B-I00, CTQ2017-85341-P, PGC2018-098212-B-C21, EUR2019-103825, and PID2019-109555GBI00), the Generalitat de Catalunya (project 2017SGR39 and the ICREA Academia prize 2019 awarded to A.P.), the Eusko Jaurlaritza (projects PIBA19-0004, IT1254-19, and 2019-CIEN-000092-01), and the Swedish Research Council (grant 2019-05618). S.E. thanks Universitat de Girona and DIPC for an IFUdG2019 PhD fellowship. A.P. is a Serra Húnter Fellow
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

pH-Responsive Gelation in Metallo-Supramolecular Polymers Based on the Protic Pyridinedicarboxamide Ligand

  • Ahmadi, Mostafa
  • Panahi, Farhad
  • Bahri-Laleh, Naeimeh
  • Sabzi, Mohammad
  • Pareras, Gerard
  • Falcone, Bruno N.
  • Poater Teixidor, Albert
Pyridinedicarboxamide (PDCA) ligands have been widely integrated into different polymer chemistries and provided promising self-healing properties in bulk upon adding specific metal ions. However, their application in the development of synthetic hydrogels is limited due to the lack of clear kinetics and thermodynamic data. To fill this gap, we study the dynamics of polymer hydrogels formed by the condensation of linear poly(ethylene glycol) (PEG) precursors and the PDCA ligand, followed by the complexation with different metal ions at various pH values. Rheological studies reveal an unprecedented ability of PDCA in complexation with Co2+/3+ and Ni2+ at elevated pH values, but in contrast with former reports, not with Fe3+ and Zn2+. Moreover, Co2+/3+ gels demonstrate lower equilibrium constants resulting in faster and more efficient self-healing compared to those made by Ni2+. Spectroscopic UV and Fourier transform infrared (FTIR) studies also suggest structural modifications in the presence of the gel-forming metal ions but not the others. To explain these results, we employ static and periodic density functional theory (DFT) simulations. Static DFT indeed reveals that the binding interaction is clearly stronger for Co and Ni, and Fe shows the poorest values by far. The most stable complex geometry is octahedral, in which the central pyridyl, one lateral deprotonated amide, and one carbonyl participate in the metal coordination. Moreover, the periodic calculations unveil an overstabilization effect due to the noncovalent interactions between the PEG segments, which results in their torsion and formation of a helicoidal-like structure, M.A. would like to thank the German Research Foundation (DFG) for their financial support via the independent research grant number 491930291. A.P. is a Serra Hunter Fellow and ́ ICREA Academia Prize 2019. A.P. thanks the Ministerio de Economía y Competitividad (MINECO) for project PGC2018-097722-B-I00. N.B.-L. thanks Iran Polymer and Petrochemical Institute for its support through fund No.43794115, Open Access funding provided thanks to the CRUE-CSIC agreement with ACS
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanism of the Facile Nitrous Oxide fixation by Homogeneous Ruthenium Hydride Pincer Catalysts

  • Escayola Gordils, Sílvia
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
Solving ozone depletion and climate change problems require the development of effective methods for sustainably curbing them. With this aim, Milstein and coworkers developed a PNP pincer ruthenium catalyst for the homogeneous hydrogenation of nitrous oxide (N2O), an ozone-depleting substance and the third most important greenhouse gas, to generate dinitrogen and water as resultant products. The mechanism of this promising transformation was unveiled by means of experiments together with Density Functional Theory (DFT) calculations, which inspired Milstein and coworkers to use similar (PNN)Ru-H pincer catalysts for the reduction of N2O by CO to produce N2 and CO2. The use of the latter type of catalysts resulted in the proposition of a new reaction protocol and allowed to work under milder conditions. Here we describe the detailed mechanism of the last transformation catalyzed by a (PNN)Ru−H catalyst by means of DFT calculations, and not only this, but we also discover the way to block undesired parasitic reactions. Apart from that, we have explored a new evolution of this family of catalysts to go beyond previous experimental outcomes. The mechanism consists in a cascade of easy steps, starting from an insertion of the N2O oxygen into the Ru-H bond generating a hydroxo intermediate and releasing N2, and ending with a β-hydride elimination to form CO2 and regenerate the catalyst. The whole process occurs in a facile way with the exception of two steps: the formation of the hydroxyl ligand and the final β-hydride elimination to form CO2. However, the energy barriers of these two steps are not the bottleneck of the catalysis, but rather the easiness of the pyridyl group bonded to Ru to isomerize by C-H activation. We propose to solve this drawback by tuning the PNN ligand to block the pyridyl free rotation, S.E. thanks Universitat de Girona and Donostia International Physics Center (DIPC) for an IFUdG2019 PhD fellowship. A.P. is a Serra Húnter Fellow. A.P. and M.S. thank the Ministerio de Economía y Competitividad (MINECO) of Spain for projects PGC2018-097722-B-I00 and CTQ2017-85341-P and the Generalitat de Catalunya for project 2017SGR39 and the ICREA Academia prize 2019 awarded to A.P. We thank Prof. David Milstein for helpful discussion
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Free-Radical Photopolymerization for Curing Products for Refinish Coatings Market

  • Ribas-Massonis, Aina
  • Cicujano, Magalí
  • Duran i Carpintero, Josep
  • Besalú i Llorà, Emili
  • Poater Teixidor, Albert
Even though there are many photocurable compositions that are cured by cationic photopolymerization mechanisms, UV curing generally consists of the formation of cross-linking covalent bonds between a resin and monomers via a photoinitiated free radical polymerization reaction, obtaining a three-dimensional polymer network. One of its many applications is in the refinish coatings market, where putties, primers and clear coats can be cured faster and more efficiently than with traditional curing. All these products contain the same essential components, which are resin, monomers and photoinitiators, the latter being the source of free radicals. They may also include additives used to achieve a certain consistency, but always taking into account the avoidance of damage to the UV curing—for example, by removing light from the innermost layers. Surface curing also has its challenges since it can be easily inhibited by oxygen, although this can be solved by adding scavengers such as amines or thiols, able to react with the otherwise inactive peroxy radicals and continue the propagation of the polymerization reaction. In this review article, we cover a broad analysis from the organic point of view to the industrial applications of this line of research, with a wide current and future range of uses, This research was funded by Ministerio de Economía y Competitividad (MINECO) of Spain for the project PGC2018-097722-B-I00 and PID2021-127423NB-I00; Generalitat de Catalunya for the project 2017SGR39; Xarxa de Referència en Química Teòrica i Computacional, and the ICREA Acadèmia Prize 2019 to A.P
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Surface Engineering for Enhanced Perovskite Solar Cells: Fullerene-Mediated Trap State Formation on CsPbI3 (001) Surface

  • George, Gibu
  • Sharapa, Dmitry I.
  • Stasyuk, Anton J.
  • Poater Teixidor, Albert
  • Solà i Puig, Miquel
  • Posada-Pérez, Sergio
Photovoltaic technology, particularly perovskite materials (PSCs), has emerged as a promising avenue due to their excellent light-absorbing properties. Despite advancements, issues like the presence of defects affecting device performance persist. CsPbI3 perovskites have shown potential, but trap states induced by surface defects remain a challenge. The use of fullerene-derivatives, like C60 and PC61BM, has stand out for enhancing the device stability eliminating/reducing hysteresis and passivating trap states. However, the mechanisms behind fullerene-induced passivation of trap states and their impact on surface energetics remain unclear. This study employs periodic density functional (DFT) simulations to explore the interaction between C60, PC61BM, and CsPbI3 (001) surface, with and without defects (Cs vacancy, Pb vacancy, and I-antisite). The DFT simulations reveal that both C60 and PC61BM effectively passivate trap states induced by I-antisite defects by promoting surface reconstruction. This work contributes to understanding the fundamental aspects of surface-defect interactions in CsPbI3 perovskites. Both C60 and PC61BM play a crucial role in passivating trap states, inducing atomic reorganization, and avoiding the nonradiative recombination. The findings provide valuable insights into mechanisms for trap state passivation by fullerene derivatives, paving the way for further research to enhance perovskite solar cell performance, G.G. is thankful for the contract 2020 FISDU 00345 from the Generalitat de Catalunya and the mobility grant (MOB2021) from the Universitat de Girona. S.P.-P. appreciates the economic support of Marie Curie fellowship (H2020-MSCA-IF-2020-101020330). A.P. is a Serra Húnter Fellow and received the ICREA Academia Prize 2019. M.S. and A.P. thank the Spanish MCIN (MCIN/AEI/10.13039/50110001103) for projects PID2023-147424NB-I00, PID2020-13711 GB-I00, PGC2018-097722-B-I00, and RED2022-134331-T, and the Generalitat de Catalunya for project 2021SGR623. Computational time at the MARENOSTRUM supercomputer has been provided by the Barcelona Supercomputing Centre through a grant from Red Española de Supercomputación, projects QHS-2021-3-0009, QHS-2022-1-0016, and QHS-2022-3-0001 and also by the Consorci de Serveis Universitaris de Catalunya (CSUC). We also acknowledge the support by Baden-Württemberg through bwHPC (bwUniCluster and bwForCluster JUSTUS)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Review on the Use of Heavy Metal Deposits from Water Treatment Waste towards Catalytic Chemical Syntheses

  • Das, Tushar Kanti
  • Poater Teixidor, Albert
The toxicity and persistence of heavy metals has become a serious problem for humans. These heavy metals accumulate mainly in wastewater from various industries’ discharged effluents. The recent trends in research are now focused not only on the removal efficiency of toxic metal particles, but also on their effective reuse as catalysts. This review discusses the types of heavy metals obtained from wastewater and their recovery through commonly practiced physico-chemical pathways. In addition, it covers the advantages of the new system for capturing heavy metals from wastewater, as compared to older conventional technologies. The discussion also includes the various structural aspects of trapping systems and their hypothesized mechanistic approaches to immobilization and further rejuvenation of catalysts. Finally, it concludes with the challenges and future prospects of this research to help protect the ecosystem, This research was funded by Ministerio de Economía y Competitividad (MINECO) of Spain for the project PGC2018-097722-B-I00; Generalitat de Catalunya for project 2017SGR39, and ICREA Academia prize 2019 to A.P
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Cycloaddition of CO2 to epoxides by highly nucleophilic 4-aminopyridines: establishing a relationship between carbon basicity and catalytic performance by experimental and DFT investigations

  • Natongchai, Wuttichai
  • Luque Urrutia, Jesús Antonio
  • Phungpanya, Chalida
  • Solà i Puig, Miquel
  • D'Elia, Valerio
  • Poater Teixidor, Albert
  • Zipse, Hendrik
The development of single-component halogen-free organocatalysts in the highly investigated cyclo- addition of CO2 to epoxides is sought-after to enhance the sustainability of the process and reduce costs. In this context, the use of strongly nucleophilic single-component catalysts has been generally restricted to a limited selection of N-nucleophiles. In this study, predictive calculations of epoxide-specific carbon basicities suggested that highly nucleophilic 3,4-diaminopyridines possess suitable basicity to serve as active single-component catalysts for the cycloaddition of CO2 to epoxides. Indeed, experimentally, the most active compounds of this class performed efficiently for the conversion of epoxides to carbonates under atmospheric pressure outperforming the catalytic activity of traditional N-nucleophiles. Importantly, the 3,4-diaminopyridino scaffold could be easily supported on polystyrene and used as a recyclable heterogeneous catalyst under atmospheric CO2 pressure. Finally, the mechanism of the cyclo- addition reaction catalyzed by several N-nucleophiles was investigated highlighting the importance of the 3,4-diaminopyridine nucleophilicity in competently promoting the crucial initial step of epoxide ring- opening without the addition of nucleophiles or hydrogen bond donors, A.P. and M.S. thank the Ministerio de Economía y Competitividad (MINECO) of Spain for projects CTQ2014-59832-JIN, PGC2018-097722-BI00 and CTQ2017-85341-P; Generalitat de Catalunya for project 2017SGR39, Xarxa de Referència en Química Teòrica i Computacional, and ICREA Academia prize 2014 to M.S. and 2019 to A.P
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Unveiling the complexity of the dual gold(I) catalyzed intermolecular hydroamination of alkynes leading to vinylazoles

  • Yeamin, Md Bin
  • Duran i Carpintero, Josep
  • Simon i Rabasseda, Sílvia
  • Tzouras, Nikolaos V.
  • Nolan, Steven P.
  • Poater Teixidor, Albert
The conversion of alkynes into functionalised alkenes catalyzed by Au(NHC) complexes (NHC = N-heterocyclic carbene) is a fundamental and atom-economical transformation yet its mechanistic understanding is limited. In order to shed light on such catalytic reaction mechanisms, computational tools are utilized to gain insights into the gold catalyzed intermolecular hydroamination of internal alkynes. The combination of alkynes and benzotriazole leads to vinylazoles via a solvent free, gold(I) mediated hydroamination. DFT permits an in-depth discussion of single versus dual metal catalysis in this transformation. The role of the triflate anion is studied, being essential for the protodeauration and it helped to clarify the rate determining step, that consists of the gold-tiazolyl nucleophilic attack to the gold-alkyne π-complex, A.P. is a Serra Húnter Fellow. A.P. and S.S. are grateful to the Ministerio de Economia ́ y Competitividad (MINECO) of Spain (project PGC2018–097722-B-I00 and PID2020–13711GB-I00), the Generalitat de Catalunya (project 2017SGR39). A.P. thanks the ICREA Academia prize 2019. The Research Foundation – Flanders (FWO) is also gratefully acknowledged for a Fundamental Research PhD fellowship to N.V.T. (11I6921N). S.P.N. thanks the iBOF (C3 project) for partial support of the work performed in Ghent, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The Importance of the Bite Angle of Metal(III) Salen Catalysts in the Sequestration of CO2 with Epoxides in Mild Conditions

  • Vidal-López, Anna
  • Posada-Pérez, Sergio
  • Solà i Puig, Miquel
  • D'Elia, Valerio
  • Poater Teixidor, Albert
The search for environmentally sustainable and economically affordable catalysts is incessant in the world of chemistry, especially when it comes to reduce polluting gases such as CO2. Capture and sequestration of CO2 are very interesting research fields, although it seems clear that the efforts must be routed towards the potential use of CO2 as an economical feedstock. In this sense, the CO2 cycloaddition to epoxides to give rise to cyclic carbonates has attracted much attention. Here the results for the formation of cyclic organic carbonates catalyzed by metal-salen complexes, previously achieved with yttrium and scandium, are compared with those of analogous complexes containing metals from the first transition series, such as cobalt or chromium. DFT calculations allow to determine whether this switch of metals will be feasible and provide the basis for instigating future experimental efforts in this regard. The calculations analyzing the structure and electronics of the catalysts allow us to give not only a clear picture of whether these catalysts will be efficient, but also allow to assess which metal center is the most convenient and/or whether the catalytic reaction will occur under mild conditions. Advanced buried volume calculations with the SambVca packages shed light on the different catalytic pockets of monometallic first row transition metals versus group III salen complexes. Our results show that the bite O-M-O angle plays an essential role in the catalysis, S.P.P. thanks the Spanish Ministerio de Ciencia e Innovacion for Juan de la Cierva Formacion fellowship (FJC2019-039623-I). A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019. M.S. and A.P. thank the Spanish MINECO for projects PID2020-113711GB-I00, PID2021- 127423NB-I00, and PGC2018-097722-B-I00 and the Generalitat de Catalunya for project 2017SGR39
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

[Pd(NHC)(μ-Cl)Cl]2: Versatile and Highly Reactive Complexes for Cross-Coupling Reactions that Avoid Formation of Inactive Pd(I) Off-Cycle Products

  • Zhou, Tongliang
  • Ma, Siyue
  • Nahra, Fady
  • Obled, Alan M.C.
  • Poater Teixidor, Albert
  • Cavallo, Luigi
  • Cazin, Catherine S. J.
  • Nolan, Steven P.
  • Szostak, Michal
The development of more reactive, general, easily accessible, and readily available Pd(II)–NHC precatalysts remains a key challenge in homogeneous catalysis. In this study, we establish air-stable NHC–Pd(II) chloro-dimers, [Pd(NHC)(μ-Cl)Cl]2, as the most reactive Pd(II)–NHC catalysts developed to date. Most crucially, compared with [Pd(NHC)(allyl)Cl] complexes, replacement of the allyl throw-away ligand with chloride allows for a more facile activation step, while effectively preventing the formation of off-cycle [Pd2(μ-allyl)(μ-Cl)(NHC)2] products. The utility is demonstrated via broad compatibility with amide cross-coupling, Suzuki cross-coupling, and the direct, late-stage functionalization of pharmaceuticals. Computational studies provide key insight into the NHC–Pd(II) chloro-dimer activation pathway. A facile synthesis of NHC–Pd(II) chloro-dimers in one-pot from NHC salts is reported. Considering the tremendous utility of Pd-catalyzed cross-coupling reactions and the overwhelming success of [Pd(NHC)(allyl)Cl] precatalysts, we believe that NHC–Pd(II) chloro-dimers, [Pd(NHC)(μ-Cl)Cl]2, should be considered as go-to precatalysts of choice in cross-coupling processes, We thank Rutgers University (M.S.), the NSF (CAREER CHE-1650766, M.S.), and the NIH (1R35GM133326, M.S.) for financial support. The Bruker 500 MHz spectrometer used in this study was supported by the NSF-MRI grant (CHE-1229030). For work conducted in Belgium, S.P.N. and C.S.J.C. wish to thank the UGent BOF (starter and senior research grants). Umicore AG is thanked for gifts of materials. A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019 holder. A.P. thanks the Spanish MICINN for project PGC2018-097722-B-I00
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

MOF Encapsulation of Ru Olefin Metathesis Catalysts to Block Catalyst Decomposition

  • Pareras, Gerard
  • Tiana, Davide
  • Poater Teixidor, Albert
In the present work, a catalyst variation of the second-generation Hoveyda–Grubbs catalyst, particularly the ammonium-tagged Ru-alkylidene metathesis catalyst AquaMetTM, is under study, not simply to increase the efficiency in olefin metathesis but also the solubility in polar solvents. Moreover, this ionic catalyst was combined with the metal organic framework (MOF) (Cr)MIL-101-SO3−(Na·15-crown-5)+. We started from the experimental results by Grela et al., who increased the performance when the ruthenium catalyst was confined inside the cavities of the MOF, achieving non-covalent interactions between both moieties. Here, using density functional theory (DFT) calculations, the role of the ammonium N-heterocyclic carbene (NHC) tagged and the confinement effects are checked. The kinetics are used to compare reaction profiles, whereas SambVca steric maps and NCI plots are used to characterize the role of the MOF structurally and electronically, This research was funded by the Ministerio de Economía y Competitividad (MINECO) of Spain for project PGC2018-097722-B-I00, the Generalitat de Catalunya for project 2017SGR39, and computer resources and technical support were provided by the Barcelona Supercomputing Center (BSC)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards Dual-Metal Catalyzed Hydroalkoxylation of Alkynes

  • González Belman, Oscar Francisco
  • Brotons Rufes, Artur
  • Tomasini, Michele
  • Falivene, Laura
  • Caporaso, Lucia
  • Jiménez Halla, José Óscar Carlos
  • Poater Teixidor, Albert
Poly (vinyl ethers) are compounds with great value in the coating industry due to exhibiting properties such as high viscosity, soft adhesiveness, resistance to saponification and solubility in water and organic solvents. However, the main challenge in this field is the synthesis of vinyl ether monomers that can be synthetized by methodologies such as vinyl transfer, reduction of vinyl phosphate ether, isomerization, hydrogenation of acetylenic ethers, elimination, addition of alcohols to alkyne species etc. Nevertheless, the most successful strategy to access to vinyl ether derivatives is the addition of alcohols to alkynes catalyzed by transition metals such as molybdenum, tungsten, ruthenium, palladium, platinum, gold, silver, iridium and rhodium, where gold-NHC catalysts have shown the best results in vinyl ether synthesis. Recently, the hydrophenoxylation reaction was found to proceed through a digold-assisted process where the species that determine the rate of the reaction are PhO-[Au(IPr)] and alkyne-[Au(IPr)]. Later, the improvement of the hydrophenoxylation reaction by using a mixed combination of Cu-NHC and Au-NHC catalysts was also reported. DFT studies confirmed a cost-effective method for the hydrophenoxylation reaction and located the rate-determining step, which turned out to be quite sensitive to the sterical hindrance due to the NHC ligands, This research was funded by the Ministerio de Economía y Competitividad (MINECO) of Spain for project PGC2018-097722-B-I00, the Generalitat de Catalunya for project 2017SGR39 and Xarxa de Referència en Química Teórica i Computacional
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Unravelling Enzymatic Features in a Supramolecular Iridium Catalyst by Computational Calculations

  • Tomasini, Michele
  • Caporaso, Lucia
  • Trouvé, Jonathan
  • Poater i Teixidor, Jordi
  • Gramage Doria, Rafael
  • Poater Teixidor, Albert
Non-biological catalysts following the governing principles of enzymes are attractive systems to disclose unprecedented reactivities. Most of those existing catalysts feature an adaptable molecular recognition site for substrate binding that are prone to undergo conformational selection pathways. Herein, we present a non-biological catalyst that is able to bind substrates via the induced fit model according to in-depth computational calculations. The system, which is constituted by an inflexible substrate-recognition site derived from a zinc-porphyrin in the second coordination sphere, features destabilization of ground states as well as stabilization of transition states for the relevant iridium-catalyzed C−H bond borylation of pyridine. In addition, this catalyst appears to be most suited to tightly bind the transition state rather than the substrate. Besides these features, which are reminiscent of the action modes of enzymes, new elementary catalytic steps (i. e. C−B bond formation and catalyst regeneration) have been disclosed owing to the unique distortions encountered in the different intermediates and transition states, Institució Catalana de Recerca i Estudis Avançats. Grant Number: ICREA Academia 2019. Ministerio de Ciencia e Innovación. Grant Numbers: PGC2018-097722-B-I00, PID2019-106830GB-I00, MDM-2017-0767, PID2021-127423NB-I00, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanistic Aspects of the Palladium-Catalyzed Suzuki-Miyaura Cross-Coupling Reaction

  • D'Alterio, Massimo C.
  • Casals Cruañas, Èric
  • Tzouras, Nikolaos V.
  • Talarico, Giovanni
  • Nolan, Steven P.
  • Poater Teixidor, Albert
The story of C−C bond formation includes several reactions, and surely Suzuki-Miyaura is among the most outstanding ones. Herein, a brief historical overview of insights regarding the reaction mechanism is provided. In particular, the formation of the catalytically active species is probably the main concern, thus the preactivation is in competition with, or even assumes the role of the rate determining step (rds) of the overall reaction. Computational chemistry is key in identifying the rds and thus leading to milder conditions on an experimental level by means of predictive catalysis, A.P is grateful to the Ministerio de Economía y Competitividad (MINECO) of Spain for project PGC2018-097722-B I00, the Generalitat de Catalunya for project 2017SGR39, Xarxa de Referència en Química Teórica i Computacional). A.P. thanks the ICREA Academia prize 2019. SPN thanks the iBOF (C3 project) for partial support of the work performed in Ghent. The Research Foundation – Flanders (FWO) is also gratefully acknowledged for a Fundamental Research PhD fellowship to NVT (11I6921N), Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Knölker Iron Catalysts for Hydrogenation Revisited: Non Spectator Solvent and Fine-Tuning

  • Gimferrer Andrés, Martí
  • Joly, Nicolas
  • Escayola Gordils, Sílvia
  • Viñas Panella, Eduard
  • Gaillard, Sylvain
  • Solà i Puig, Miquel
  • Renaud, Jean Luc
  • Salvador Sedano, Pedro
  • Poater Teixidor, Albert
The reductive amination process under hydrogen at high pressure catalyzed by iron complexes is of great synthetic interest. In this work, we report Density Functional Theory (DFT) studies on the reductive amination catalyzed by a Knölker-type iron complex. Different modifications of the catalyst are explored to improve the efficiency and guide experiments towards milder conditions. DFT calculations in conjunction with analysis of the chemical structure in terms of geometry, fragment partial charges, Effective Oxidation States (EOS) and aromaticity, allows to conclude that the presence of electron-withdrawing substituents on the cyclopentadienone ring induces a decrease of the activation barriers of most relevant steps, leading to a more efficient catalysis. The present work is a clear example that predictive catalysis can have a fundamental role in sustainable catalytic transformations, S.G., N.J., and J.-L.R. gratefully acknowledge financial support from the “Ministere de la Recherche et des Nouvelles ̀ Technologies”, Normandie Université, CNRS, and the LABEX SynOrg (ANR-11-LABX-0029). N.J. acknowledges the Graduate School of Research XL-Chem (ANR-18-EURE0020 XL-Chem) for the PhD fellowship. A.P., P.S., and M.S. thank the Ministerio de Economía y Competitividad (MINECO) of Spain for projects PGC2018-097722-B-I00, PGC2018-098212-B-C22, and PID2020-13711GB-I00 and Generalitat de Catalunya for projects 2017SGR39 and ICREA Academia prize 2019. A.P. is a Serra Hunter fellow. ́ M.G. thanks the Generalitat de Catalunya and Fons Social Europeu for the predoctoral fellowship (2018 FI_B01120). S.E. thanks Universitat de Girona and Donostia International Physics Center (DIPC) for an IFUdG2019 predoctoral fellowship, Open Access funding provided thanks to the CRUE-CSIC agreement with ACS
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Chelation enforcing a dual gold configuration in the catalytic hydroxyphenoxylation of alkynes

  • Escayola Gordils, Sílvia
  • Poater i Teixidor, Jordi
  • Ramos, Miguel
  • Luque Urrutia, Jesús Antonio
  • Duran i Carpintero, Josep
  • Simon i Rabasseda, Sílvia
  • Solà i Puig, Miquel
  • Cavallo, Luigi
  • Nolan, Steven P.
  • Poater Teixidor, Albert
The functionalization of alkynes by Au (N-heterocyclic carbene, NHC) complexes via the hydrophenoxylation reaction is a paradigm for the discussion between mono and dual metal catalysis. With the aim of mimicking the framework containing two gold units, achieved with molecular boxes, two NHC ligands were joined here with a chelated chain and this motif was examined in the hydrophenoxylation/hydroalkoxylation reactions through DFT calculations. This synthetic motif transforms the standard hydrophenoxylation intermolecular reaction from an inter- into an intra-molecular nucleophilic attack, when forming the C–O bond. Various chain lengths were tested with regard to the coordination of the alkyne to the cationic NHC-gold(I) center, Institucio Catalana de Recerca i Estudis Avançats (ICREA), Grant/Award Number: ICREA Academia 2019; Generalitat de Catalunya, Grant/Award Numbers: 2017SGR348, 2017SGR39; Ministerio de Economía y Competitividad (MINECO) of Spain, Grant/Award Numbers: CTQ2017-85341-P, MDM-2017-0767, PGC2018-097722-B-I00, PID-2019-106830GB-I00, PID2020-113711GB-I00, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Precise Control of the Site-Selective in Ruthenium-Catalyzed C-H Bond Amidations by Cyclic Amides as Powerful Directing Groups

  • Yuan, Yu-Chao
  • Lu, Qiu-Li
  • Zhu, Xiao Tong
  • Posada-Pérez, Sergio
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
  • Roisnel, Thierry
  • Gramage Doria, Rafael
Selective C-H functionalizations aiming at the formation of new C-N bonds is of paramount importance in the context of step- and atom-economy methodologies in organic synthesis. Although the implementation of noble metal catalysts is prevalent, more benign cobalt pre-catalysts have recently appeared to be promising. However, they sometimes feature selectivity issues that limit their applicability in late-stage functionalization. Herein, we report on a highly reactive ruthenium-based catalytic system displaying excellent levels of mono-, regio- and site-selectivity by exploiting a series of biologically-relevant cyclic amides as weak directing groups. The use of dioxazolone derivatives as amidating reagents overcomes the issues encountered in the use of unstable azide derivatives for such transformations and it enables us to perform these reactions under very mild reaction conditions (air, 40 °C). Moreover, a combination of deuteration experiments and a comparative study with different types of directing groups highlights the relevance of weak amide directing groups for enabling the formation of six-membered cycloruthenate intermediates in the key elementary steps of the catalytic cycle. In addition, DFT computational calculations were carried out for the first time for studying ruthenium-catalyzed C-N bond-forming processes via C-H activation assisted by weak directing groups, thereby elucidating the origin of the regio- and site-selectivity, Y.-C. Y. acknowledges the Science and Technology of XuZhou (KC19042) for financial support. We also thank the Public Experimental Research Center, Xuzhou Medical University, for NMR determination. R. G-D. acknowledges the ANR-JCJC scheme (ANR-19-CE07-0039), CNRS and the University of Rennes 1 for financial support. S. P. P. thanks the Marie Curie fellowship (H2020-MSCA-IF-2020-101020330). A. P. is a Serra Húnter Fellow and thanks ICREA Academia Prize 2019 and Spanish Mineco for project ref. PGC2018-097722-B-I00. A. P. and M. S. thank the Spanish Ministerio de Ciencia e Innovación for projects PID2021-127423NB-I00 and PID2020-13711GB-I00 and the Generalitat de Catalunya for project 2017SGR39
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Do Carbon Nano‐onions Behave as Nanoscopic Faraday Cages? A Comparison of the Reactivity of C60, C240, C60@C240, Li+@C60, Li+@C240, and Li+@C60@C240

  • Luque-Urrutia, Jesús A.
  • Poater Teixidor, Albert
  • Solà i Puig, Miquel
From the analysis of the polarizability of carbon nano-onions (CNOs), it was concluded that CNOs behave as near perfect nanoscopic Faraday cages. If CNOs behave as ideal Faraday cages, the reactivity of the C240 cage should be the same in Li+@C240 and Li+@C60@C240. In this work, the Diels–Alder reaction of cyclopentadiene to the free C240 cage and the C60@C240 CNO together with their Li+-doped counterparts were analyzed using DFT. It was found that in all cases the preferred cycloaddition is on bond [6,6] of type B of C240. Encapsulation of Li+ results in lower enthalpy barriers due to the decrease of the energy of the LUMO orbital of the C240 cage. When the Li+ is placed inside the CNO C60@C240, the decrease in enthalpy barrier is similar to that of Li+@C240. However, the location of Li+ in Li+@C240 (off-centered) and Li+@C60@C240 (centered) is quite different. When Li+ was placed in the center of the C240 cage in Li+@C240, the barriers increased significantly. Taking into account this effect, the barriers in Li+@C240 and Li+@C60@C240 differ by about 4 kcal mol−1. This result can be attributed to the shielding effect of C60 in Li+@C60@C240. As a result, we conclude that this CNO does not act as a perfect Faraday cage, J.A.L.U. thanks Universitat de Girona for an IFUdG2017 PhD fellowship. A.P. is a Serra Húnter fellow. A.P. and M.S. thank the Spanish MINECO for projects PGC2018-097722-B-I00 and CTQ2017-85341-P, respectively. M.S. thanks the Generalitat de Catalunya for project 2017SGR39, the Xarxa de Referència en Química Teòrica i Computacional, and ICREA Academia 2014 prize
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An unprecedented π-electronic circuit involving an odd number of carbon atoms in a grossly warped non-planar nanographene

  • Escayola Gordils, Sílvia
  • Poater Teixidor, Albert
  • Muñoz-Castro, Alvaro
  • Solà i Puig, Miquel
The formation of π-aromatic circuits along a grossly warped nanographene, C80H30, containing five- and seven-membered rings inserted into a six-membered mesh, reveals global π-circuits at the edge of the backbone. Based on DFT calculations, one of the two most favorable circuits for π-electron delocalization formally has 50 π-electrons abiding by Hückel's rule, whereas the second one formally has 75 π-electrons and, remarkably, it does not follow any of the known rules of aromaticity, This work was supported with funds from the Ministerio de Economía y Competitividad (MINECO) of Spain (project CTQ2017- 85341-P and PGC2018-097722-B-I00) and the Generalitat de Catalunya (project 2017SGR39 and the ICREA Academia prize 2019 awarded to A.P.). S.E. thanks Universitat de Girona and DIPC for an IFUdG2019 PhD fellowship. A.P. is a Serra Húnter Fellow. A.M.- C. thanks the financial support from FONDECYT 1180683
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of the Ethanol Content of Adduct on the Comonomer Incorporation of Related Ziegler–Natta Catalysts in Propylene (Co)polymerizations

  • Mehdizadeh, Mohammadreza
  • Karkhaneh, Fereshteh
  • Nekoomanesh-Haghighi, Mehdi
  • Sadjadi, Samahe
  • Emami, Mehrsa
  • Teimoury, HamidReza
  • Salimi, Mehrdad
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
  • Bahri-Laleh, Naeimeh
  • Posada-Pérez, Sergio
The aim of this work is to investigate the influence of the ethanol content of adducts on the catalytic behavior of related Ziegler–Natta (ZN) catalysts in propylene homo- and copolymerizations (with 1-hexene comonomer) in terms of activity, isotacticity, H2 response, and comonomer incorporation. For this purpose, three MgCl2.nEtOH adducts with n values of 0.7, 1.2, and 2.8 were synthesized and used in the synthesis of related ZN catalysts. The catalysts were thoroughly characterized using XRD, BET, SEM, EDX, N2 adsorption–desorption, and DFT techniques. Additionally, the microstructure of the synthesized (co)polymers was distinguished via DSC, SSA, and TREF techniques. Their activity was found to enhance with the adduct’s ethanol content in both homo- and copolymerization experiments, and the increase was more pronounced in homopolymerization reactions in the absence of H2. Furthermore, the catalyst with the highest ethanol content provided a copolymer with a lower isotacticity index, a shorter meso sequence length, and a more uniform distribution of comonomer within the chains. These results were attributed to the higher total surface area and Ti content of the corresponding catalyst, as well as its lower average pore diameter, a larger proportion of large pores compared to the other two catalysts, and its spherical open bud morphology. It affirms the importance of catalyst/support ethanol-content control during the preparation process. Then, molecular simulation was employed to shed light on the iso-specificity of the polypropylene produced via synthesized catalysts, This research was funded by the Spanish Ministerio de Ciencia e Innovación for projects PGC2018-097722-B-I00, PID2020-13711GB-I00, and PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. N. Bahri-Laleh is thankful to the Iran National Science Foundation (INSF) for financial support of the work under the grant number of 4006310. S.P.-P. is thankful to the economic support of Marie Curie fellowship (H2020-MSCA-IF-2020-101020330)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Successive Diels–Alder Cycloadditions of Cyclopentadiene to [10]CPP⊃C60: A Computational Study

  • Pareras, Gerard
  • Simon i Rabasseda, Sílvia
  • Poater Teixidor, Albert
  • Solà i Puig, Miquel
Fullerenes have potential applications in many fields. To reach their full potential, fullerenes have to be functionalized. One of the most common reactions used to functionalize fullerenes is the Diels–Alder cycloaddition. In this case, it is important to control the regioselectivity of the cycloaddition during the formation of higher adducts. In C60, successive Diels–Alder cycloadditions lead to the Th-symmetric hexakisadduct. In this work, we explore computationally using density functional theory (DFT) how the presence of a [10]cycloparaphenylene ring encapsulating C60 ([10]CPP⊃C60) affects the regioselectivity of multiple additions to C60. Our results show that the presence of the [10]CPP ring changes the preferred sites of cycloaddition compared to free C60 and leads to the formation of the tetrakisadduct. Somewhat surprisingly, our calculations predict formation of this particular tetrakisadduct to be more favored in [10]CPP⊃C60 than in free C60, A.P. is a Serra Hunter Fellow and ICREA Academia Prize ́ 2019. A.P., S.S,and M.S. thank the Spanish MINECO for projects PGC2018-097722-B-I00 and PID2020-113711GB-I00 and the Generalitat de Catalunya for project 2017SGR39. The work was performed under the Project HPC-EUROPA3 (HPC17870HV), with the support of the EC Research Innovation Action under the H2020 Programme. G.P. gratefully acknowledges the support of Institut de Química Computacional i Catalisis (IQCC) and the computer resources ̀ and technical support provided by the Barcelona Supercomputing Center (CNS-BSC) and the Irish Centre for HighEnd Computing (ICHEC). Open Access funding provided thanks to the CRUE-CSIC agreement with ACS
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lubricant hydrogenation over a functionalized clay-based Pd catalyst: A combined computational and experimental study

  • Asadi, Zahra
  • Sadjadi, Samahe
  • Nekoomanesh-Haghighi, Mehdi
  • Posada-Pérez, Sergio
  • Solà i Puig, Miquel
  • Bahri-Laleh, Naeimeh
  • Poater Teixidor, Albert
In the world of chemical catalysis and with the importance of being especially in the petrochemical industry, hydrogenation reactions play a central role. Within this framework, the hydrogenation of polyalphaolefins (PAOs) is receiving increasing attention. In this work, for the sake of efficiency and to furnish an efficient support for the immobilization of Pd nanoparticles, a new catalyst containing the 1,3-diaminopropane (DAP) diamine for the decoration of the halloysite (HNT) outer surface is used. The resulting catalytic system exhibited high activity in the hydrogenation of PAOs and high catalyst recyclability since it could be used for several reaction runs, with no appreciable loss of the catalytic activity and Pd leaching. In addition, the nature of the heterogeneous catalysis was demonstrated by a hot filtration test. Density functional theory (DFT) calculations not only unveil the reaction mechanism, in which the rate determining step was determined mechanistically, but also confirm the best location of the palladium nanoparticles, placed between the diamino ligands in the halloysite surface. Furthermore, the computational simulations rationalize why experimentally the catalytic process requires hydrogen pressure of 7 bar and temperature of 130°C to reach high yield, Ministerio de Ciencia e Innovación, Grant/Award Numbers: PID2020-113711GB-I00, PGC2018-097722-B-I00; Iran Polymer and Petrochemical Institute, Grant/Award Number: 43794110; MCIN/AEI, Grant/Award Number: PID2021-127423NB-I00; Institució Catalana de Recerca i Estudis Avançats, Grant/Award Number: ICREA Academia 2019; Generalitat de Catalunya, Grant/Award Number: 2017SGR39, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards mild conditions by predictive catalysis via sterics in the Ru-catalyzed hydrogenation of thioesters

  • Tomasini, Michele
  • Duran i Carpintero, Josep
  • Simon i Rabasseda, Sílvia
  • Azofra, Luis Miguel
  • Poater Teixidor, Albert
The Milstein's reported discovery of hydrogenation of thioesters directly toward thiols and alcohols catalyzed by a Ru-acridine complex has been studied here by DFT calculations to know the origin of the different performance depending on the nature of the substituents. Unveiling the reaction mechanism leads to a deeper understanding of the steric and electronic properties on the nature of the limiting step of the reaction. Steric maps and Conceptual DFT have been the tools to rationalize the reactivity patterns. In addition, the nature of the catalyst has been studied, replacing the substituents on the phosphorous atoms by less sterically demanding groups with the aim to move to milder reaction conditions, A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019, and thanks the Spanish MINECO for projects ref. PGC2018-097722-B-I00 and CTQ2017-85341-P, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Combining Both Acceptorless Dehydrogenation and Borrowing Hydrogen Mechanisms in One System as Described by DFT Calculations

  • Cicolella, Alessandra
  • D'Alterio, Massimo C.
  • Duran i Carpintero, Josep
  • Simon i Rabasseda, Sílvia
  • Talarico, Giovanni
  • Poater Teixidor, Albert
The mechanisms for the formation of N-substituted hydrazones by coupling of alcohols and hydrazine, achieved by the sequential processes of acceptorless dehydrogenation and borrowing hydrogen, has been unveiled by density functional theory (DFT) calculations. The release of water and molecular hydrogen as subproducts, combined with the Mn-PNN pincer based catalyst describe a green environment. Mechanistically, apart from describing a complex system of three coupled catalytic pathways, calculations describe the pivotal role of two intermediates, which participate in two catalytic pathways each one. Finally, predictive catalysis plays the role to push forward this reaction toward milder conditions, and thus in line with green chemistry standards, A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019. S.S. and A.P. thank the Spanish MINECO for projects and PID2020-113711GB-I00 and PGC2018-097722-B-I0, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effect of support hydrophobicity of halloysite-based catalysts on the polyalphaolefin hydrofinishing performance

  • Shams, Arash
  • Sadjadi, Samahe
  • Duran i Carpintero, Josep
  • Simon i Rabasseda, Sílvia
  • Poater Teixidor, Albert
  • Bahri-Laleh, Naeimeh
Hydrogenation of polyalphaolefins (PAOs) is an industrial process catalyzed by supported precious metals. In this regard, halloysite (Hal) clay has been proven as an efficient support for the immobilization of Pd nanoparticles and development of high-performance catalysts under mild reaction condition. In this research, the effect of Hal hydrophobicity on the PAO hydrofinishing efficiency is studied. In this line, cetrimonium bromide (CTAB) was used for adjusting the hydrophobicity of halloysite surface. Three catalysts, Hal/Pd, Hal/Pd/CTAB, and Hal/CTAB/Pd, were fabricated by palladation of Hal, treating palladated Hal with CTAB and palladation of CTAB-treated Hal, respectively. The catalysts were characterized, and their activity for the hydrogenation of PAO was appraised. Moreover, a molecular simulation approach was employed to survey the effect of surface hydrophobicity of Hal on the alkene hydrogenation energy diagram and the steric maps of the main catalytic stages. Both experimental and computational studies approved that the presence of CTAB detracts the activity of the catalyst. Moreover, the order of introduction of Pd and CTAB affects the content of incorporated CTAB and Pd and Pd particle size, and the order of catalysts activity was as follows: Hal/Pd > Hal/Pd/CTAB > Hal/CTAB/Pd. In fact, 5 wt.% Hal/Pd promoted the hydrogenation at 130°C and hydrogen pressure of 8 bar to furnish 98% hydrogenated PAO, Albert Poater is a Serra Húnter Fellow andICREA Academia Prize 2019 and thanks the SpanishMINECO for project ref. PGC2018-097722-B-I00, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Experimental and DFT study on titanium-based half-sandwich metallocene catalysts and their application for production of 1-hexene from ethylene

  • Gharajedaghi, Sajjad
  • Mohamadnia, Zahra
  • Ahmadi, Ebrahim
  • Marefat, Mohamadreza
  • Pareras, Gerard
  • Simon i Rabasseda, Sílvia
  • Poater Teixidor, Albert
  • Bahri-Laleh, Naeimeh
Different types of [Ind-C(R)-Phenyl]TiCl3 catalysts based on pendant arene containing indenyl (Ind) ligand bearing various types of bridges (R=cyclo‐C5H10 (C1), (CH3)2 (C2), 4-tBu-cyclo‐C5H9 (C3), and cyclo‐C6H12 (C4)) have been synthesized, and used in the ethylene trimerization to 1-hexene in the presence of methyl aluminoxane (MAO) as co-catalyst. The reaction conditions were first optimized in C2 catalyst case, where the highest 1-hexene product was achieved at the catalyst concentration, temperature and ethylene pressure of 1.5 10−3 M, 40 °C, and 8 bar, respectively. During this optimization and under specific reaction conditions, a switching behavior from ethylene trimerization to polymerization was also detected, as an undesired reaction. At the optimized conditions, synthesized catalysts showed the following trend toward both 1-hexene yield and selectivity: C1>C2>C3>C4. Then, to shed light on the possible reaction mechanisms and to confirm the activity trend obtained in experimental section, density functional theory (DFT) calculations were employed. In this line, obtained results for activity trend in the simulation studies fit well with the experiments. According to both experimental and DFT results, the highest catalytic activity was observed in the presence of the catalyst with a cyclohexane middle bridge (C1), This work was supported by the Iran National Science Foundation (INSF) through the grant number of 98020308. A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019, and thanks the Spanish MINECO for project PGC2018-097722-B-I00 and CTQ2017-85341-P, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier