Pasar al contenido principal

CATALISIS PREDICTIVA PARA CAMBIAR EL ODEN SECUENCIAL ENTRE EXPERIMENTOS I CALCULOS

PID2021-127423NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 76
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Single─Not Double─3D-Aromaticity in an Oxidized Closo Icosahedral Dodecaiodo-Dodecaborate Cluster

  • Poater, Jordi
  • Escayola, Sílvia
  • Poater, Albert
  • Teixidor, Francesc
  • Ottosson, Henrik
  • Viñas, Clara
  • Solà, Miquel
3D-aromatic molecules with (distorted) tetrahedral, octahedral, or spherical structures are much less common than typical 2D-aromatic species or even 2D-aromatic-in-3D systems. Closo boranes, [BnHn]2- (5 ≤ n ≤ 14) and carboranes are examples of compounds that are singly 3D-aromatic, and we now explore if there are species that are doubly 3D-aromatic. The most widely known example of a species with double 2D-aromaticity is the hexaiodobenzene dication, [C6I6]2+. This species shows π-aromaticity in the benzene ring and σ-aromaticity in the outer ring formed by the iodine substituents. Inspired by the hexaiodobenzene dication example, in this work, we explore the potential for double 3D-aromaticity in [B12I12]0/2+. Our results based on magnetic and electronic descriptors of aromaticity together with 11B{1H} NMR experimental spectra of boron-iodinated o-carboranes suggest that these two oxidized forms of a closo icosahedral dodecaiodo-dodecaborate cluster, [B12I12] and [B12I12]2+, behave as doubly 3D-aromatic compounds. However, an evaluation of the energetic contribution of the potential double 3D-aromaticity through homodesmotic reactions shows that delocalization in the I12 shell, in contrast to the 10σ-electron I62+ ring in the hexaiodobenzene dication, does not contribute to any stabilization of the system. Therefore, the [B12I12]0/2+ species cannot be considered as doubly 3D-aromatic., The authors thank the Spanish Ministerio de Ciencia e Innovación for projects PID2020-113711GB-I00, PID2021-127423NB-I00, PID2022-138861NB-I00, PID-2019-106830GB-I00, and CEX2021-001202-M, the Generalitat de Catalunya for projects 2021SGR623 and 2021SGR442, and the Swedish Research Council for project 2019-05618. A.P. is a Serra Húnter Fellow and ICREA Academia Prize winner (2019). S.E. thanks Universitat de Girona and DIPC for an IFUdG2019 PhD fellowship., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2019-000917-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Highly dispersed Rh single atoms over graphitic carbon nitride as a robust catalyst for the hydroformylation reaction

  • Jurado, Lole
  • Esvan, Jerome
  • Luque-Álvarez, Ligia A.
  • Bobadilla, Luis F.
  • Odriozola, José Antonio
  • Posada-Pérez, Sergio
  • Poater, Albert
  • Comas-Vives, Aleix
  • Axet, M Rosa
Rhodium-catalysed hydroformylation, effective tool in bulk and fine-chemical synthesis, predominantly uses soluble metal complexes. For that reason, the metal leaching and the catalyst recycling are still the major drawbacks of this process. Single-atom catalysts have emerged as a powerful tool to combine the advantages of both homogeneous and heterogeneous catalysts. Since using an appropriate support material is key to create stable, finely dispersed, single-atom catalysts, here we show that Rh atoms anchored on graphitic carbon nitride are robust catalysts for the hydroformylation reaction of styrene., This work was supported by the CNRS, which we gratefully acknowledge. The authors acknowledge the financial support from EMERGENCE (R) INC2021 for L. J. grant. A. P. is a Serra Hunter Professor and thanks ICREA Academia 2019. A. P. and A. C.-V. Thank the Ministerio de Ciencia e Innovacion for the projects PID2021-127423NB-I00 and PGC2018-100818-A-I00, respectively. A. C.-V. also thanks the Spanish MEC and the European Social Fund (grant no. RyC-2016-19930). S. P.-P. thanks Marie Curie fellowship (H2020-MSCA-IF-2020-101020330) and "Juan de la Cierva Formacion" fellowship ref. FJC2019-039623-I. Ligia A. Luque-Alvarez thanks VI-PPITUS (University of Sevilla) for her current predoctoral contract., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Computational and experimental insights into single-atom catalysts supported on g-C<inf>3</inf>N<inf>4</inf>: Unraveling the superior stability and catalytic activity of Rh in hydroformylation reactions

  • Monreal-Corona, Roger
  • Jurado, Lole
  • Ishikawa, Hiroya
  • Gimferrer, Martí
  • Poater, Albert
  • Bobadilla, Luis F.
  • Axet, M. Rosa
  • Posada-Pérez, Sergio
Single-atom catalysts (SACs) have emerged as a promising class of materials, leveraging the benefits of both homogeneous and heterogeneous catalysis to enhance efficiency and selectivity. In this work we have investigated the catalytic performance of SACs supported on graphitic carbon nitride (g-C3N4) for hydroformylation reactions. A systematic evaluation of nine transition metal SACs (Fe, Ru, Os, Co, Rh, Ir, Ni, Pd, and Pt) anchored on g-C3N4 was conducted using a combination of Density Functional Theory (DFT) calculations and experimental validation. Computational results indicate that at higher metal loadings, most metal atoms tend to migrate into the interlayers of g-C3N4, reducing their accessibility to reactant species and limiting their involvement in the catalytic process. However, Ru, Os, Ir, and Co single atoms remain stabilized on the heptazine rings, residing on the outermost layer and preserving active sites, albeit with lower predicted catalytic activity compared to Rh, while Fe, Ni, Pd, and Pt preferentially localize within the interlayers. Ru, Rh, and Co SACs anchored on g-C3N4 were experimentally synthesized and characterized using Transmission Electron Microscopy (TEM), X-ray Photoelectron Spectroscopy (XPS), and in situ Diffuse Reflectance Infrared Fourier Transform Spectroscopy (DRIFTS), along with catalytic testing, confirming the single-atom nature of the catalysts and corroborating the theoretical findings., We would like to acknowledge Paula Sabaté-Fàbregas for her expert contribution in generating the plots, which significantly improved the clarity and presentation of our results. This work was supported by the Ministerio de Ciencia e Innovación (PID2021-127423NB-I00 project) and the Generalitat de Catalunya (Project 2021-SGR-623). A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019. We thank the Spanish Ministerio de Universidades for the predoctoral fellowship FPU20/00707 to R.M.-C. M.G. thanks for being funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation) - 217133147/SFB1073, project C03. This work was supported by the CNRS, which we gratefully acknowledge. The authors acknowledge the financial support from EMERGENCE@INC2021. The authors acknowledge the financial support from the Japan Society for the Promotion of Science (JSPS) for Hiroya Ishikawa grant. R. Castaing characterization platform in Toulouse is also acknowledged. Computational time at the MARENOSTRUM supercomputer has been provided by the Barcelona Supercomputing Centre through a grant from Red Española de Supercomputación, projects QHS-2022-3-0028, QHS-2023-1-0012, and QHS-2024-1-0041., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Unraveling aromaticity: the dual worlds of pyrazole, pyrazoline, and 3D carborane

  • Noori, Zahra
  • Solà, Miquel
  • Viñas, Clara
  • Teixidor, Francesc
  • Poater, Jordi
A new series of o-carborane-fused pyrazoles has been recently successfully synthesized. This fusion was expected to create a hybrid 3D/2D aromatic system, combining the 3D aromaticity of o-carborane with the 2D aromaticity of pyrazole. However, while the boron cage retains its aromatic character, the pyrazole's aromaticity is lost. As a result, rather than forming o-carborane-fused pyrazoles, the synthesis yielded o-carborane-fused pyrazolines, which are non-aromatic. The limited overlap between the π molecular orbitals (MOs) of the planar heterocycle and the n + 1 MOs of the carborane prevents significant electronic delocalization between the two fused components. This contrasts with the fusion of pyrazole and benzene to form indazole, where both rings maintain their 2D aromaticity. Our findings demonstrate that the peripheral σ-aromaticity of carborane and the π-aromaticity of the heterocycle are orthogonal, making a true 3D/2D aromatic system unachievable. The carborane is highly aromatic, generating highly negative NICS values (-25 to -30 ppm). We have observed that these high NICS values extend to fused rings, leading to incorrect estimations of aromaticity. Therefore, relying solely on NICS can be misleading, and other computational indicators, along with experimental or structural data, should be used to accurately assess aromaticity., We thank the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI/10.13039/501100011033) for projects PID2019-106832RB-100, PID2023-147424NB-I00, PID2020-113711GB-I00, PID2021-127423NB-I00, PID2022138861NB-I00, and CEX2021-001202-M, and the Generalitat de Catalunya for projects 2021SGR623 and 2021SGR442. We also acknowledge CSUC for HPC facilities., With funding from the Spanish government through the ‘Severo Ochoa Centre of Excellence’ accreditation (CEX2023-001263-S)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Data-driven analysis of Ni-catalyzed semihydrogenations of alkynes

  • Martínez Fernández, Miguel
  • Yeamin, Md Bin
  • Dalmau, David
  • Carbó, Jorge J.
  • Poater, Albert
  • Alegre-Requena, Juan V.
The semihydrogenation of alkynes to alkenes has historically been an essential technique in organic chemistry. In this context, researchers often employ transition metal complexes to achieve this conversion. Given the pronounced polarization of results, often yielding either very high or very low values, it remains challenging to discern the factors influencing reactivity and selectivity in many cases. In this work, we combine different sub-disciplines of digital chemistry with experimental outcomes to rationalize the results of a model Ni-catalyzed semihydrogenation that leads to E-alkenes. First, we analyze the main factors behind successful reactions using a machine learning classification model. The descriptors are computed directly from the SMILES strings of the reacting alkynes using an automated protocol that relies on structural features, molecular mechanics, and semi-empirical techniques. This workflow requires minimal human intervention and provides a fast and effective approach. Next, we couple the same descriptors with activation barriers calculated with density functional theory, generating a regression model that explains reactivity based on the properties of the alkyne substrates. Overall, this study demonstrates the potential of using a combination of digital chemistry techniques to uncover reaction trends in Ni-catalyzed semihydrogenations of alkynes, an area where human intuition proves limited in application., J.V.A.-R., M.M.-F. and D.D. acknowledge Gobierno de Aragón-Fondo Social Europeo (Research Groups E07_23R and E17_23R) and the State Research Agency of Spain (MCIN/AEI/10.13039/501100011033/FEDER, UE) for financial support (PID2022-140159NA-I00). J.V.A.-R. and D.D. acknowledge the computing resources at the Galicia Supercomputing Center, CESGA, including access to the FinisTerrae supercomputer, the Red Española de Supercomputación (grant number QH-2023-2-0003) and the Drago cluster facility of SGAI-CSIC. D.D. thanks Gobierno de Aragón-FSE for a PhD fellowship (2021–2025). A.P. and J.J.C. thank the Spanish Ministerio de Ciencia e Innovación for projects PID2021-127423NB-I00 and PID2021-128128NB-I00, and the Generalitat de Catalunya for projects 2021SGR623 and 2021SGR00110. A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019. M.B.Y acknowledges the Margarita Salas Grant 2021URV-MS-12 from Rovira I Virgili University (URV) and CSA Trust Grant 2023., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Data-driven analysis of ni-catalyzed semihydrogenations of alkynes

  • Martinez-Fernandez, Miguel
  • Yeamin, Md Bin
  • Dalmau, David
  • Carbó, Jorge J.
  • Poater, Albert
  • Alegre-Requena, Juan V.
The semihydrogenation of alkynes to alkenes has historically been an essential technique in organic chemistry. In this context, researchers often employ transition metal complexes to achieve this conversion. Given the pronounced polarization of results, often yielding either very high or very low values, it remains challenging to discern the factors influencing reactivity and selectivity in many cases. In this work, we combine different sub‐disciplines of digital chemistry with experimental outcomes to rationalize the results of a model Ni‐catalyzed semihydrogenation that leads to E‐alkenes. First, we analyze the main factors behind successful reactions using a machine learning classification model. The descriptors are computed directly from the SMILES strings of the reacting alkynes using an automated protocol that relies on structural features, molecular mechanics, and semi‐empirical techniques. This workflow requires minimal human intervention and provides a fast and effective approach. Next, we couple the same descriptors with activation barriers calculated with density functional theory, generating a regression model that explains reactivity based on the properties of the alkyne substrates. Overall, this study demonstrates the potential of using a combination of digital chemistry techniques to uncover reaction trends in Ni‐catalyzed semihydrogenations of alkynes, an area where human intuition proves limited in application.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Systematic investigation of the role of the epoxides as substrates for CO<sub>2</sub> capture in the cycloaddition reaction catalysed by ascorbic acid

  • Ortiz-García, Thalía
  • Posada-Pérez, Sergio
  • El-Khchin, Layla
  • Dalmau, David
  • Alegre-Requena, Juan V.
  • Solà, Miquel
  • D'Elia, Valerio
  • Poater, Albert
This work establishes a comprehensive theoretical framework for synthesizing cyclic organic carbonates, crucial for the polymer industry, through the organocatalytic cycloaddition of carbon dioxide (CO2) to epoxides under mild pressure and temperature conditions. Using advanced computational techniques, the study examines the thermodynamic and kinetic aspects of the reaction, with a particular focus on epoxide substrates featuring diverse substituents. Detailed analysis reveals activation energy barriers and identifies the rate-determining step (rds), offering crucial insights into the molecular processes governing the reaction. An automated data-driven workflow revealed that the buried volume of the epoxide O atoms was among the most influential molecular features affecting reaction barriers. Overall, the findings align with experimental data, offering insights into substrate design for optimized CO2 utilization. This work calls for a systematic exploration of ascorbic acid-based catalyst modifications to optimize energy barriers and improve overall reaction performance, paving the way for rational catalyst design and predictive catalysis in CO2 valorization. The computational study is not limited to basic research or ascorbic acid but is applicable to most catalysts capable of carrying out this reaction in the polymer industry.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hydrogen Evolution and Carbon Dioxide Reduction Pathways on Graphitic Carbon Nitride Decorated by Single-Atom of Transition Metals

  • Vidal López, Anna
  • Gassó-Capdevila, Joan
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
  • Posada-Pérez, Sergio
The conversion of carbon dioxide (CO2) into valuable products represents a promising strategy to mitigate CO2 emissions and enable sustainable energy storage. However, the development of efficient and selective catalysts for the electrocatalytic reduction of CO2 (CO2RR) remains a significant challenge. In this study, we explore the performance of first-row transition metal single atoms anchored on g-C3N4 monolayers as potential catalysts for CO2RR. We employed density functional theory (DFT) calculations to investigate the hydrogen evolution reaction (HER) as a competing pathway to CO2RR. Only the candidates that suppress HER are promising candidates for the selective CO2RR. Our results indicate that Ni1/C3N4 emerges as the most promising catalyst due to its relatively moderate-high overpotential for HER and a favorable reaction pathway that favors CO production through the HCOO* intermediate. Despite some challenges, such as the strong Ni-CO interaction hindering CO desorption, Ni1/C3N4 presents a viable route for CO2RR. Mn and Co single atoms exhibit slightly lower but still promising overpotential towards HER. Nevertheless, Co1/C3N4 clearly shows a preference for HER due to the large barriers of CO hydrogenation and HCOOH production, while Mn1/C3N4 opens the route of formic acid production. This work highlights the importance of evaluating HER alongside CO2RR to identify catalysts with optimal selectivity and efficiency, A.P. and M.S. thank the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI/10.13039/50110001103) for projects PID2021-127423NB-I00 and PID2023-147424NB-I00, and the Generalitat de Catalunya for project 2021SGR623 and ICREA Academia 2019 awarded to A.P. and 2024 to M.S. A.P. is a Serra Húnter Professor. Computational time at the MARENOSTRUM supercomputer has been provided by the Barcelona Supercomputing Centre through a grant from Red Española de Supercomputación (Projects QHS-2023-2-0031, QHS-2024-1-0041, and QHS-2024-2-0028), Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS), 7
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanism of Gold-Catalyzed Arylation-Lactonization: A Density Functional Theory Study on the Role of the (MIC^N)AuCl Complex in Au(I)/Au(III) Catalysis

  • Monreal Corona, Roger
  • Ribas Salamaña, Xavi
  • Pla i Quintana, Anna
  • Poater Teixidor, Albert
Gold-catalyzed redox transformations via Au(I)/Au(III) cycles offer efficient oxidative addition and reductive elimination under mild, oxidant-free conditions. Recent studies highlight the role of hemilabile mesoionic carbene (MIC) ligands in stabilizing key intermediates. Using DFT, we investigated the mechanism of the arylation-lactonization of γ-alkenoic acids, revealing two viable pathways, cis and trans, each with distinct rate-determining steps. While the trans pathway avoids decomposition of the catalyst, its lactonization step is hindered by a high barrier. In contrast, the cis pathway features competing productive and decomposition routes. By correlating computed activation barriers with experimental yields, we built statistically significant multivariable models (R2 = 0.919), enabling the prediction of product yields across various substituted aryl iodides. These models revealed clear electronic and steric trends. Additionally, ligand modifications suggest that trans-selective oxidative addition can be improved through steric tuning with the trans effect also influencing selectivity. Overall, this study provides valuable design principles for future gold-catalyzed redox processes, We are grateful for financial support from the Ministerio de Ciencia e Innovación (PID2021-127423NB-I00, PID2022-136970NB-I00, TED2021-130573B-100, and PID2023-146849NB I00/MICIU/AEI/10.13039/501100011033/FEDER, UE projects) and the Generalitat de Catalunya (2021-SGR-623 and 2021 SGR 00475). We thank the Spanish Ministerio de Universidades for the predoctoral fellowship FPU20/00707 to R.M.-C. A.P.-Q. and A.P. are Serra Húnter Fellows, and X.R. thanks ICREA Academia Prize 2020
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The metal role on the activity and stereoselectivity of ring opening polymerization of racemic lactide promoted by Salen catalysts

  • Rusconi, Yolanda
  • D’Alterio, Massimo Christian
  • Grillo, Andrea
  • Poater Teixidor, Albert
  • De Rosa, Claudio
  • Talarico, Giovanni
The stereoselective rac-lactide ring opening polymerization (ROP) promoted by enantiopure Salen catalysts has been studied by Density Functional Theory calculations with the aim of understanding the role of the metal atom in both the stereoselectivity and the activity of the process. The results obtained with M = Al, Sc, Y, La were compared to identify the steric and electronic effects deriving from the metal centre by combining a molecular descriptor based on the buried volume percentage (%VBur) and calculations of electronic parameters, including chemical hardness and electrophilicity. Our analysis gave insight into the parameters affecting the outcome of the ROP and we concluded that steric and electronic effects promoting stereoselective polymerization suppress catalyst activity and viceversa, This work was financially supported by the Italian Ministry of University and Research (PRIN 2022, CUP E53D23008360006). This study was carried out within the MICS (Made in Italy–Circular and Sustainable) Extended Partnership funded from the European Union Next-Generation EU (Piano Nazionale di Ripresa e Resilienza (PNRR) – Missione 4 Componente 2, Investimento 1.3 –D.D. 1551.11-10-2022, PE00000004). A.P. is a Serra Húnter Fellow. A.P. received ICREA Academia Prize 2019. We thank the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Computational Insights into the Regioselectivity of 1,3-Dipolar Cycloadditions inside Carbon Nanotubes

  • Tomasini, Michele
  • Marforio, Tainah Dorina
  • Calveresi, Matteo
  • Poater Teixidor, Albert
  • Poater i Teixidor, Jordi
Nature’s enzymes exhibit remarkable substrate specificity and catalytic efficiency by transforming substrates within confined active sites. To emulate this, various molecular containers, including zeolites, cyclodextrins, calix[n]arenes, cavitands, cucurbit[n]urils, metal-organic frameworks, covalent organic frameworks, and carbon nanotubes (CNTs), have been explored. Among these, CNTs are notable for their unique physical and chemical properties, enabling them to control reactions through spatial confinement. This study investigates the effect of CNT encapsulation on metal-free 1,3-dipolar Huisgen cycloaddition reactions between benzyl azide and substituted alkynes. Experimental results showed that CNTs significantly enhance the selectivity for the 1,4-triazole product. Computational studies using density functional theory further elucidate the impact of CNT confinement on reaction mechanisms and regioselectivity. The findings reveal that confinement within CNTs alters potential energy surfaces, favoring 1,4-triazole formation over 1,5-triazole, driven by steric and electronic factors. Additionally, comparative analyses highlight the influence of CNT diameter on activation energies and product stability, particularly with energy decomposition analysis and noncovalent interaction plots. This research underscores the potential of CNTs as nanoscale reactors for controlled synthesis, providing insights into the design of new catalytic systems and advancing the field of molecular encapsulation for selective organic transformations, The authors thank the Spanish Ministerio de Ciencia e Innovación for projects PID2021-127423NB-I00 and PID2022-138861NB-I00 and the Generalitat de Catalunya for projects 2021SGR623 and 2021SGR442. A.P. is a Serra Húnter Fellow and ICREA Academia Prize winner (2019). We thank Barcelona Supercomputing Centre for computational facilities (QHS-2024-2-0018, QHS-2024-2-0028, and QHS-2024-2-0039), Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

New halloysite-supported bio-based acidic ionic liquid as an efficient catalyst for conversion of fructose to 5-hydroxymethylfurfural: A combined experimental and computational studies

  • Sadjadi, Samahe
  • Fahimizadeh, Mohammad
  • Bahri-Laleh, Naeimeh
  • Bin Yeamin, Md
  • Yuan, Peng
  • Poater Teixidor, Albert
In an effort to design a bio-based catalyst with enough acidic strength to promote the conversion of fructose to 5-hydroxymethylfurfural, a series of halloysite clay-supported acidic ionic liquids were considered as potential candidates. The catalysts could be synthesized from reaction of Cl-functionalized halloysite with histidine, histamine, adenine and tryptophan, followed by treatment with chlorosulfuric acid. Predictive computational studies were performed and approved the superior activity of the histidine-based catalyst. In addition, the computational studies aimed to identify the optimal catalyst using Density Functional Theory (DFT) calculations and other characterization techniques, particularly non covalent interactions plots. Aknowledged by computational results, histidine based catalyst was prepared, characterized and its catalytic activity and recyclability were appraised for the synthesis of 5-hydroxymethylfurfural from fructose as a bio-based starting material. The reaction conditions were optimized and it was revealed that using 30 wt% catalyst, the desired product could be achieved at 100 °C within 1 h. Notably, the catalyst exhibited high recyclability and efficiently promoted the reaction of other mono-saccharides as well, A.P. is a Serra Húnter Fellow and recipient of the 2019 ICREA Academia Prize, also acknowledges the Spanish Ministerio de Ciencia, Innovación y Universidades (MICIU) for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electrophilic insertion and ring growth in 1,2,5-azadiborolidines: theoretical evidence for boron-driven expansion

  • Lucas-Rosales, Victor A.
  • Vázquez, Miguel A.
  • Merino, Gabriel
  • Poater Teixidor, Albert
  • Jiménez Halla, José Óscar Carlos
This study computationally investigates the reactivity of 1,2,5-azadiborolidine derivatives toward carbon monoxide (CO), extending ring-expansion mechanisms from borole chemistry. Establishing structural and electronic analogies through isosterism, we propose that endocyclic CO insertion operates in this new class of boron heterocycles. 1,2,5-Tri-tert-butyl-1,2,5-azadiborolidine emerged as the optimal candidate, exhibiting a favourable three-step pathway: CO insertion, dimerization of the ring-expanded intermediate, and subsequent double [1,2]-migration. Thermochemical analysis confirms viability under mild conditions, with solvents (DCM, n-pentane, THF) providing similar barriers and reaction Gibbs energies. Key reactivity indicators include B–C(O) and C–O bond lengths, while correlations between kinetic barriers and σ → π*(CO) backdonation energies provide predictive insight. This work broadens boron-based reactivity by proposing a fourth class of CO-inserting boracycles and highlights 1,2,5-azadiborolidines as versatile, metal-free frameworks for small-molecule activation, V. A. L.-R. thanks SECIHTI for his M.Sc. student scholarship (#1312084). J. O. C. J.-H. acknowledges Laboratorio Nacional de Cómputo de Alto Desempeño (PIPILA) and Universidad de Guanajuato (DCNE). A. P. is a Serra Húnter Fellow and thanks the Spanish MINECO for project PID2021-127423NB-I00, and the Generalitat de Catalunya for project 2021SGR623. The authors acknowledge the computing time supported by Conacyt (Grant CB-2015-252356), and additional resources provided by BSC supercomputing facilities. Open Access funding provided thanks to the CRUE-CSIC agreement with RSC
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Chemical dealcoholation of MgCl2·EtOH adduct by Al compounds and its effect on the performance of Ziegler–Natta catalysts

  • Bazvand, Reza
  • Bahri-Laleh, Naeimeh
  • Abedini, Hossein
  • Nekoomanesh-Haghighi, Mehdi
  • Poater Teixidor, Albert
MgCl2·nEtOH adducts play a major role in the industrial production of polyethylenes. Their chemical dealcoholation, usually accomplished during the catalyst synthesis step, has had a pronounced impact on the microstructure of the final Ziegler–Natta pre-catalysts and the properties of the resulting polymers. Due to the industrial and academic importance of this issue, different aluminum-based compounds including triethylaluminum (TEAL), triisobutylaluminum (TIBA), and ethylaluminumdichloride (EADC) were used in this research in the chemical dealcoholation of a MgCl2·1.5EtOH adduct, to provide the target catalysts. According to the analytical results, the catalysts synthesized using aluminum compounds (especially TEAL and EADC) generally had a more fractured structure, a smaller particle size and a vast surface area. Aluminum precursors bind to the catalyst structure together with TiCl4, which is manifested from their higher adsorption energies obtained by DFT calculations, and the presence of Al atom in the elemental analysis. Varying the chemical structure and physical properties of the catalysts, established using Al compounds, caused significant variation in the ethylene polymerization kinetic curves, their related rate constants, and the flow characteristic of the final polymers. The overall results outstandingly affirm that by appropriate choice of the Lewis acid compound, during the chemical dealcoholation of the adduct, various Ziegler–Natta catalysts can be achieved for different polyethylene grades, Iran National Science Foundation. Grant Number: 4006310; Iran Polymer and Petrochemical Institute; Ministerio de Ciencia e Innovación. Grant Number: PID2021-127423NB-I00; Generalitat de Catalunya. Grant Number: 2021SGR623 and Barcelona Supercomputing Center (BSC), Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Synthesis of 1H‑Isoindole-containing scaffolds enabled by a nitrile trifunctionalization

  • Díaz Jiménez, Àlex
  • Monreal Corona, Roger
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
  • Roglans i Ribas, Anna
  • Pla i Quintana, Anna
Nitrogen ring structures are widely found in biologically active compounds and natural products, making their construction an important area of focus in modern organic synthesis. In this work, the synthesis of products containing the 1H-isoindole motif has been successfully accomplished through a rhodium-catalyzed cascade, resulting in a significant increase in molecular complexity. This reaction, which encompasses the trifunctionalization of a nitrile moiety, is triggered by the formation of a nitrile ylide with extended conjugation by reaction of a rhodium vinylcarbene with a nitrile. The mechanism has been investigated by means of density functional theory calculations and supported through experimental data, enabling us to elucidate the precise steps that explain the rare nitrile trifunctionalization. A crucial step in this trifunctionalization is the attack of the second vinylcarbene to the azepine ring formed upon1,7-electrocyclization of the nitrile ylide with extended conjugation, We are grateful for financial support from the Ministerio de Ciencia e Innovación (PID2021-127423NB-I00 and PID2020-113711GB-I00 MCIN/AEI/10.13039/501100011033 projects) and the Generalitat de Catalunya (Project 2021-SGR-623). We thank the Spanish Ministerio de Universidades for the predoctoral fellowship FPU18/02912 to A.D.-J. and FPU20/00707 to R.M.-C. A.P.Q. and A.P. are Serra Húnter Fellows, and A.P. thanks ICREA Academia Prize 2019, Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Pd nanoparticles supported on modified magnetic kaolin as a novel hydrogenation catalyst

  • Karimi, Mahsa
  • Sadjadi, Samahe
  • Arabi, Hassan
  • Bahri-Laleh, Naeimeh
  • Poater Teixidor, Albert
Hydrogenation process is considered a vital and important step in the production of Poly-alpha-olefin oils. The development of novel catalytic systems is crucial for enhancing the efficiency of hydroprocessing. In recent decades, catalytic systems with magnetic separation have received immense attention. In work, we designed and synthesized a novel magnetic catalyst for the efficient hydrogenation of Poly-alpha-olefin oil. To achieve this, kaolinite was first magnetized and then functionalized with N-(2-aminoethyl)-3-aminopropyltrimethoxysilane and trichloro-1,3,5-triazine. To design an optimal support, a library of four amine compounds i.e., urea, thiourea, guanidine, and thiosemicarbazide was considered. Predictive computational results affirmed the superior interaction of thiosemicarbazide with palladium nanoparticles, making it an efficient ligand for stabilizing Pd nanoparticles. The prepared catalyst was fully characterized using ICP-AES, WAXS, TGA, FT-IR, VSM, SEM, and TEM analyses and applied for the hydro-finishing of Poly-alpha-olefin oil. In order to achieve optimal conditions, the effects of catalyst loading, hydrogen pressure and temperature as well as reaction time were surveyed. Gratifyingly, the resulting catalyst was a suitable candidate for the hydrogenation of Poly-alpha-olefin oil and exhibited superb performance under mild reaction conditions. The results indicated that 4 wt.% of the obtained catalyst could effectively promote the hydrogenation reaction at 130 °C for 7 h under hydrogen pressure of 7 bar, achieving a hydrogenation yield of 99 %. Furthermore, the catalyst demonstrated acceptable recyclability, retaining its activity with minimal Pd leaching after seven consecutive runs, The authors appreciate support of Iran Polymer and Petrochemical Institute. N. Bahri-Laleh is thankful to Iran National Science Foundation (INSF) for the grant number of 4006310 and SKCM2 for the Startup Grant. A.P. is a Serra Húnter Fellow, and ICREA Academia Prize 2019, and thanks the Spanish MINECO for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Macrocyclic NHC Ligands in Hoveyda-Type Ru Alkene Metathesis Catalysts: Only Sterics?

  • Brotons Rufes, Artur
  • Posada-Pérez, Sergio
  • Diver, Steven T.
  • Poater Teixidor, Albert
The integration of macrocyclic structures within N-heterocyclic carbene (NHC) ligands in Hoveyda-type catalysts presents a pioneering strategy to enhance selectivity in cross-alkene metathesis. This approach falls within a promising paradigm for avoiding undesired homocouplings between reacting alkenes and introducing site-selectivity into the cross metathesis process. This paper presents a computational study that aims to provide an improved understanding of the impact of these ligand modifications on stability, sterics, and activity, focusing on the precatalyst activation and cross-metathesis. The traditional Hoveyda-type catalyst is compared alongside two recent macrocyclic systems for which experimental data is available. Higher activation barriers in the macrocyclic systems are consistent with the reduced activity observed in these systems. Additionally, a noncovalent interaction component was found to facilitate the selective pathway, in conjunction with the already expected steric descriptors. These results highlight the potential of macrocyclic NHC ligands to enhance catalyst performance, not only offering chemoselectivity based on alkene size, but a potential for stereoselectivity capacity arising from the macrocycle-induced electronic effects, A.P. is a Serra Húnter Fellow. We thank the Spanish Minis-terio de Ciencia y Universidades (MICIU) for projects PID2021-127423NB-I00 and PID2024-155989NB-I00 and the Generalitat de Catalunya for project 2021SGR623. S.T.D. thanks the National Science Foundation (NSF) through grant CHE-1900392. Open Access funding provided thanks to the CRUE-CSIC agreement with ACS
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Matrix Effect on Singlet Oxygen Generation Using Methylene Blue as Photosensitizer

  • Xu, Jianan
  • Bonneviot, Laurent
  • Guari, Yannick
  • Monnereau, Cyrille
  • Zhang, Kun
  • Poater Teixidor, Albert
  • Rodríguez Pizarro, Montserrat
  • Albela, Belén
Methylene blue (MB) is a well-established and extensively studied photosensitizer for photodynamic therapy (PDT), since it can generate singlet oxygen with a high quantum yield upon irradiation within the phototherapeutic (600-950 nm) window. However, its activity can decrease due to the formation of dimers or higher aggregates, which can take place in an aqueous solution at relatively high concentrations. The incorporation of this molecule into a matrix can avoid this aggregation and increase its activity relative to PDT. Silica porous nanoparticles are chosen here as a matrix to host MB. The size and pore geometry are tuned in order to decrease MB leaching while maintaining good singlet oxygen generation and colloidal stability for further applications in nanomedicine. In addition, phenyl functions are grafted on the pores of the silica matrix in order to avoid MB aggregation, thereby increasing the activity of the photosensitizer in the singlet oxygen generation. DFT calculations give insight in the structure of the aggregation of the MB units, and the roles of water and organic environments are investigated through time-dependent calculations on UV-vis spectra, This research was funded by CNRS UMR-5182 and the Ecole Normale Supérieure de Lyon; the Spanish MINECO, for project PID2021-127423NB-I00; and the Generalitat de Catalunya, for project 2021SGR623
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ring Opening Polymerization of Six- and Eight-Membered Racemic Cyclic Esters for Biodegradable Materials

  • Grillo, Andrea
  • Rusconi, Yolanda
  • D’Alterio, Massimo Christian
  • De Rosa, Claudio
  • Talarico, Giovanni
  • Poater Teixidor, Albert
The low percentage of recyclability of the polymeric materials obtained by olefin transition metal (TM) polymerization catalysis has increased the interest in their substitution with more eco-friendly materials with reliable physical and mechanical properties. Among the variety of known biodegradable polymers, linear aliphatic polyesters produced by ring-opening polymerization (ROP) of cyclic esters occupy a prominent position. The polymer properties are highly dependent on the macromolecule microstructure, and the control of stereoselectivity is necessary for providing materials with precise and finely tuned properties. In this review, we aim to outline the main synthetic routes, the physical properties and also the applications of three commercially available biodegradable materials: Polylactic acid (PLA), Poly(Lactic-co-Glycolic Acid) (PLGA), and Poly(3-hydroxybutyrate) (P3HB), all of three easily accessible via ROP. In this framework, understanding the origin of enantioselectivity and the factors that determine it is then crucial for the development of materials with suitable thermal and mechanical properties, This research was funded by Ministerio de Ciencia e Innovación for the project PID2021-127423NB-I00; Generalitat de Catalunya for project 2021SGR623, and ICREA Academia prize 2019 to A.P. This work was financially supported by the Italian Ministry of University and Research (PRIN 2022, CUP E53D23008360006). This study was carried out within the MICS (Made in Italy–Circular and Sustainable) Extended Partnership funded by the European Union Next-Generation EU (PIANO NAZIONALE DI RIPRESA E RESILIENZA (PNRR)–MISSIONE 4 COMPONENTE 2, INVESTIMENTO 1.3–D.D. 1551.11-10-2022, PE00000004)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Access to Secondary Amines through Hydrogen Autotransfer Reaction Mediated by KOtBu

  • Hima, P.
  • Tomasini, Michele
  • Vageesh, M.
  • Poater Teixidor, Albert
  • Dey, Raju
We report herein an N-alkylation reaction of amines with alcohols through a hydrogen autotransfer reaction. Unlike other catalytic systems containing transition metals or additives, potassium tertiary butoxide was found to be a unique and effective catalyst for synthesizing secondary amines. The role of the K+ ion and the reaction intermediates were studied under control experiments and by theoretical calculations. The reaction was found to be general and tolerates a series of functional groups, providing a convenient method to synthesize N-alkylated compounds, Science and Engineering Research Board. Grant Number: SRG/2020/002161 NIT Calicut; Spanish Ministerio de Ciencia e smoothInnovación. Grant Number: PID2021-127423NB-I00 and Generalitat de Catalunya. Grant Number: 2021SGR623, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Free-Radical Photopolymerization for Curing Products for Refinish Coatings Market

  • Ribas-Massonis, Aina
  • Cicujano, Magalí
  • Duran i Carpintero, Josep
  • Besalú i Llorà, Emili
  • Poater Teixidor, Albert
Even though there are many photocurable compositions that are cured by cationic photopolymerization mechanisms, UV curing generally consists of the formation of cross-linking covalent bonds between a resin and monomers via a photoinitiated free radical polymerization reaction, obtaining a three-dimensional polymer network. One of its many applications is in the refinish coatings market, where putties, primers and clear coats can be cured faster and more efficiently than with traditional curing. All these products contain the same essential components, which are resin, monomers and photoinitiators, the latter being the source of free radicals. They may also include additives used to achieve a certain consistency, but always taking into account the avoidance of damage to the UV curing—for example, by removing light from the innermost layers. Surface curing also has its challenges since it can be easily inhibited by oxygen, although this can be solved by adding scavengers such as amines or thiols, able to react with the otherwise inactive peroxy radicals and continue the propagation of the polymerization reaction. In this review article, we cover a broad analysis from the organic point of view to the industrial applications of this line of research, with a wide current and future range of uses, This research was funded by Ministerio de Economía y Competitividad (MINECO) of Spain for the project PGC2018-097722-B-I00 and PID2021-127423NB-I00; Generalitat de Catalunya for the project 2017SGR39; Xarxa de Referència en Química Teòrica i Computacional, and the ICREA Acadèmia Prize 2019 to A.P
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A comprehensive review of approaches, systems, and materials used in adsorption-based atmospheric water harvesting

  • Ehtisham, Muhammad
  • Saeed-Ul-Hassan, Muhammad
  • Poater Teixidor, Albert
Atmospheric water harvesting (AWH) is one of the most efficient, sustainable, cost-effective, and promising techniques for addressing world's water scarcity. Over 4.3 billion people around the world struggle to access clean, abundant, and safe drinking water. Additionally, >3.3 million people die each year due to drinking poor quality water. Meanwhile, our atmosphere contains approximately 13,000 trillion liters of water in the form of vapor. Therefore, AWH offers a viable solution to meet the demand for drinking water, even in arid or high humidity regions. AWH can be achieved through methods such as fog harvesting, dew harvesting and sorption-based atmospheric water harvesting (SBAWH). The main aim of this manuscript is to explore the potential of Sorption-Based Atmospheric Water Harvesting (SBAWH) as a solution to the global water scarcity crisis. The study focuses on evaluating the adsorption capacities and performance of various sorbent materials, systems, and devices used in SBAWH. Notably, materials such as silica gel, zeolite, hygroscopic salts, and metal-organic frameworks (MOFs) are highlighted, with MOFs and their composites being recognized as some of the most efficient options for atmospheric water harvesting. This review emphasizes the critical role of AWH techniques in addressing the pressing issue of global water shortages, A.P. is a Serra Húnter Fellow, and ICREA Academia Prize 2019, and thanks the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 6, 11, 13
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Metallic–Organic Cages (MOCs) with Heterometallic Character: Flexibility-Enhancing MOFs

  • Posada-Pérez, Sergio
  • Poater i Teixidor, Jordi
  • Bahri-Laleh, Naeimeh
  • Poater Teixidor, Albert
The dichotomy between metal–organic frameworks (MOFs) and metal–organic cages (MOCs) opens up the research spectrum of two fields which, despite having similarities, both have their advantages and disadvantages. Due to the fact that they have cavities inside, they also have applicability in the porosity sector. Bloch and coworkers within this evolution from MOFs to MOCs manage to describe a MOC with a structure of Cu2 paddlewheel Cu4L4 (L = bis(pyrazolyl)methane) with high precision thanks to crystallographic analyses of X-ray diffraction and also SEM-EDX. Then, also at the same level of concreteness, they were able to find the self-assembly of Pd(II)Cl2 moieties on the available nitrogen donor atoms leading to a [Cu4(L(PdCl2))4] structure. Here, calculations of the DFT density functional allow us to reach an unusual precision given the magnitude and structural complexity, explaining how a pyrazole ring of each bis(pyprazolyl)methane ligand must rotate from an anti to a syn conformation, and a truncation of the MOC structure allows us to elucidate, in the absence of the MOC constraint and its packing in the crystal, that the rotation is almost barrierless, as well as also explain the relative stability of the different conformations, with the anti being the most stable conformation. Characterization calculations with Mayer bond orders (MBO) and noncovalent interaction (NCI) plots discern what is important in the interaction of this type of cage with PdCl2 moieties, also CuCl2 by analogy, as well as simple molecules of water, since the complex is stable in this solvent. However, the L ligand is proved to not have the ability to stabilize an H2O molecule, This research was funded by Ministerio de Ciencia e Innovación for the project PID2021-127423NB-I00; the Generalitat de Catalunya (project 2021 SGR0623 and ICREA Academia prize 2019 to A.P.). N.B.-L. appreciates the support of the Iran National Science Foundation (INSF) for the grant number of 4006310. S.P.-P. appreciates the economic support of Marie Curie fellowship (H2020-MSCA-IF-2020-101020330). J.P. acknowledges the Spanish Ministerio de Ciencia e Innovación (PID2019-106830GB-I00, CEX2021-001202-M and MDM-2017-0767)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The Importance of the Bite Angle of Metal(III) Salen Catalysts in the Sequestration of CO2 with Epoxides in Mild Conditions

  • Vidal-López, Anna
  • Posada-Pérez, Sergio
  • Solà i Puig, Miquel
  • D'Elia, Valerio
  • Poater Teixidor, Albert
The search for environmentally sustainable and economically affordable catalysts is incessant in the world of chemistry, especially when it comes to reduce polluting gases such as CO2. Capture and sequestration of CO2 are very interesting research fields, although it seems clear that the efforts must be routed towards the potential use of CO2 as an economical feedstock. In this sense, the CO2 cycloaddition to epoxides to give rise to cyclic carbonates has attracted much attention. Here the results for the formation of cyclic organic carbonates catalyzed by metal-salen complexes, previously achieved with yttrium and scandium, are compared with those of analogous complexes containing metals from the first transition series, such as cobalt or chromium. DFT calculations allow to determine whether this switch of metals will be feasible and provide the basis for instigating future experimental efforts in this regard. The calculations analyzing the structure and electronics of the catalysts allow us to give not only a clear picture of whether these catalysts will be efficient, but also allow to assess which metal center is the most convenient and/or whether the catalytic reaction will occur under mild conditions. Advanced buried volume calculations with the SambVca packages shed light on the different catalytic pockets of monometallic first row transition metals versus group III salen complexes. Our results show that the bite O-M-O angle plays an essential role in the catalysis, S.P.P. thanks the Spanish Ministerio de Ciencia e Innovacion for Juan de la Cierva Formacion fellowship (FJC2019-039623-I). A.P. is a Serra Húnter Fellow and ICREA Academia Prize 2019. M.S. and A.P. thank the Spanish MINECO for projects PID2020-113711GB-I00, PID2021- 127423NB-I00, and PGC2018-097722-B-I00 and the Generalitat de Catalunya for project 2017SGR39
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An efficient initiator system containing AlCl3 and supported ionic-liquid for the synthesis of conventional grade polyisobutylene in mild conditions

  • Yousefi, Saleh
  • Bahri-Laleh, Naeimeh
  • Nekoomanesh-Haghighi, Mehdi
  • Emami, Mehrsa
  • Sadjadi, Samahe
  • Mirmohammadi, Seyed Amin
  • Tomasini, Michele
  • Bardají Rodríguez, Eduard
  • Poater Teixidor, Albert
Ionic liquid based systems are used to facilitate the cationic polymerization of isobutylene to conventional grade polyisobutylene (PIB) using AlCl3 as an initiator. Specifically, the compound 1-butyl-3-methylimidazolium chloride (IL) is employed as a reference system due to its simplicity, as well as the polyionic liquid (PIL), prepared via radical polymerization of 1-butyl-3-vinylimidazolium chloride, and the halloysite clay (Hal) supported ionic liquid (S-IL). The overall results stated that the designed AlCl3/S-IL initiator system can be used as a safer and greener alternative to the industrially used BF3 system, in the development of isobutylene polymerizations under mild reaction conditions to conventional grade PIB for viscosity improvement applications. The microstructure and final properties of the as-synthesized PIB was unraveled and compared to Indopole 2100, as a commercial PIB. DFT calculations were performed to understand the different performance of IL and PIL with respect to the S-IL system, and also to show why the catalyst loading for the latter system is lower, as well as to understand how each of the three systems sequesters the catalyst AlCl3. Since the interaction is non-covalent or ionic, in addition to NBO charges, NCI plots were also used, Albert Poater is a Serra Húnter Fellow and ICREA Academia Prize 2019, and thanks the Spanish Ministerio de Ciencia e Innovación for projects PID2021-127423NB-I00 and PGC2018-097722-B-I00. Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Machine Learning in Predicting Activation Barrier Energy of C=N Bond Rotation in Amides

  • Tomasini, Michele
  • Szostak, Michal
  • Poater Teixidor, Albert
This study applies machine learning (ML) to predict activation energy barriers for cis-trans isomerization in twisted amides, focusing on the C=N bond. Amides are increasingly used in synthetic chemistry, particularly in cross-coupling reactions, due to their versatility. However, the C=N bond's high activation energy presents a challenge. Using Density Functional Theory (DFT) calculations, the study evaluates key structural parameters and energy barriers for different amides. ML models, including support vector regression and neural networks, are developed to predict these activation barriers based on molecular descriptors. The results show that twisted amides, particularly N-Ts and N-Boc types, exhibit unique reactivities influenced by steric and electronic factors. The neural network model outperformed other methods with R2 values of around or over 0.9 for ΔG≠ and ΔGtrans, though overfitting remains a concern. These findings contribute to a deeper understanding of amide reactivity, facilitating the design of more efficient catalytic systems, We thank the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. We thank the NIH (1R35GM133326), the NSF (CAREER CHE-1650766), and Rutgers University and for generous financial support. Supplement funding for this project was provided by the Rutgers University – Newark Chancellor's Research Office
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Exploring microstructure of MgCl2·nEtOH adducts for Ziegler-Natta catalysts

  • Bazvand, Reza
  • Bahri-Laleh, Naeimeh
  • Abedini, Hossein
  • Nekoomanesh-Haghighi, Mehdi
  • Poater Teixidor, Albert
The activation of MgCl2 through the formation of MgCl2·nEtOH adducts is considered the principal step for the preparation of high performance Ziegler-Natta catalysts for olefins polymerizations in industry. Despite this importance, due to the complicated microstructure of the adducts, the precise structural characterization of these compounds has been left behind. In this research, four MgCl2.nEtOH adducts (with n = 0.6, 1.0, 1.8, and 3.2) were prepared by melt quenching procedure and assessed thoroughly by different techniques. Despite the multiple peaks in TGA analysis, similar FTIR spectra were recorded, and the adducts with n = 3.2 revealed sticky nature in SEM pictures which enhanced their particle size and broadened SPAN. According to the XRD spectra, the adducts showed distinct peaks related to the lateral cuts of distorted MgCl2, in which the ratio of α-MgCl2 to β-MgCl2 form enhanced by increasing the EtOH content, that was further confirmed by DFT calculations, even though it must be accepted that it is only a minimalist exercise in terms of a clear characterization of the adducts, Ministerio de Ciencia e Innovación for project PID2021–127423NB-I00, and the Generalitat de Catalunya for project 2021SGR623. Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Characterization of a Silver Vinylcarbene Intermediate in Carbene–Alkyne Metathesis and Its Concerted C(sp2)–H Bond Insertion

  • Díaz Jiménez, Àlex
  • Monreal Corona, Roger
  • Saha, Arijit
  • Álvarez Núñez, Andrea
  • Company Casadevall, Anna
  • Parella Coll, Teodor
  • Pérez, Pedro J.
  • Caballero Bevia, Ana
  • Roglans i Ribas, Anna
  • Poater Teixidor, Albert
  • Pla i Quintana, Anna
Herein we present compelling evidence of the intervention of electrophilic silver vinylcarbenes in the carbene-alkyne metathesis (CAM) reaction, leading to a pivotal C(sp2)-H insertion process. The delicate equilibrium between the stability and reactivity of transient species is crucial for efficient detection. Through meticulous mechanistic exploration, we unveil that the mechanism for the C(sp2)-H insertion hinges on the substitution pattern. Indeed, it departs from the previously documented stepwise mechanism (involving Wheland intermediates), and it follows a concerted route, quite uncommon for this transformation, The authors are grateful for finantial support from Projects PID2021-127423NB-I00 to A.P., PID2020-113711GB-I00 and PID2023-146849NB-I00 to A.P.-Q., PID2019-106699GB-I00 to A.Co., PID2020-113797RB-C21 and PID2023-146946NB-I00 to P.J.P. and A.C. funded by the Ministerio de Ciencia, Innovación y Universidades of Spain MCIU/AEI/10.13039/501100011033 and FEDER, UE,; RED2022-134074-T and RED2022-134331-T for network support, and from the Generalitat de Catalunya (2021-SGR-623 to A.R., 2021SGR-475 to A.Co. projects). We thank the Spanish Ministerio de Universidades for the predoctoral fellowship FPU18/02912 to À.D.-J. and FPU20/00707 to R.M.-C. and the Catalan Government for the predoctoral fellowship 2022 FI_B 00605 to A.A.-N. and a Beatriu de Pinós-AGAUR Postdoctoral grant (2022BP00051) to A.S.. A.P.-Q., A. Co, and A.P. are Serra Húnter Fellows and A.P. and A.Co. thank ICREA Academia Prizes, Open Access funding provided thanks to the CRUE-CSIC agreement with ACS
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Unravelling Enzymatic Features in a Supramolecular Iridium Catalyst by Computational Calculations

  • Tomasini, Michele
  • Caporaso, Lucia
  • Trouvé, Jonathan
  • Poater i Teixidor, Jordi
  • Gramage Doria, Rafael
  • Poater Teixidor, Albert
Non-biological catalysts following the governing principles of enzymes are attractive systems to disclose unprecedented reactivities. Most of those existing catalysts feature an adaptable molecular recognition site for substrate binding that are prone to undergo conformational selection pathways. Herein, we present a non-biological catalyst that is able to bind substrates via the induced fit model according to in-depth computational calculations. The system, which is constituted by an inflexible substrate-recognition site derived from a zinc-porphyrin in the second coordination sphere, features destabilization of ground states as well as stabilization of transition states for the relevant iridium-catalyzed C−H bond borylation of pyridine. In addition, this catalyst appears to be most suited to tightly bind the transition state rather than the substrate. Besides these features, which are reminiscent of the action modes of enzymes, new elementary catalytic steps (i. e. C−B bond formation and catalyst regeneration) have been disclosed owing to the unique distortions encountered in the different intermediates and transition states, Institució Catalana de Recerca i Estudis Avançats. Grant Number: ICREA Academia 2019. Ministerio de Ciencia e Innovación. Grant Numbers: PGC2018-097722-B-I00, PID2019-106830GB-I00, MDM-2017-0767, PID2021-127423NB-I00, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Unlocking the Limitations of layered LiNiO2: Insights from DFT Simulations on its Viability as a Cathode Material for Aqueous Lithium-Ion Batteries

  • George, Gibu
  • Brotons Rufes, Artur
  • Poater Teixidor, Albert
  • Solà i Puig, Miquel
  • Posada-Pérez, Sergio
Aqueous lithium-ion batteries (ALiBs) present a promising avenue for safer and more sustainable energy storage solutions compared to traditional non-aqueous lithium-ion batteries. LiNiO2 (LNO) has emerged as a potential cathode material for ALiBs due to its high capacity potential and ability to facilitate Li⁺ intercalation over H⁺ intercalation in aqueous media. However, challenges remain regarding its stability and performance in aqueous electrolytes. In this study, we employ periodic density functional theory simulations to investigate the interactions between LNO surfaces and aqueous electrolytes, evaluating its viability as a cathode material for ALiBs. We have systematically and exhaustively studied the surface energetics, shedding light on the formation of NiOOHx species, one of the common issues associated with this material. We have evaluated the oxygen evolution reaction on LNO surfaces, revealing that they decompose water molecules into hydroxide and other intermediate species, thereby degrading the electrolyte. Our findings suggest that, despite their promising abilities for Li+ ion intercalation, the tendency to boost the generation of NiOOHx and its facility to decompose water at potentials lower than 1.23 V are important limitations for the battery performance, S.P.-P. appreciates the economic support of Marie Curie fellowship (H2020-MSCA-IF- 2020–101020330). A.P. is a Serra Húnter Fellow and received the ICREA Academia Prize 2019. M.S. and A.P. thank the Spanish MINECO for projects PID2020-13711GB-I00, PID2023-147424NB-I00, and PID2021-127423NB-I00, and the Generalitat de Catalunya for project 2021SGR623. Computational time at the MARENOSTRUM supercomputer has been provided by the Barcelona Supercomputing Centre through a grant from Red Española de Supercomputación, project (QHS-2022-3-0002)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

From (Sub)Porphyrin to (Sub)Phthalocyanine: Aromaticity Signatures in the UV-Vis Absorption Spectra

  • Escayola Gordils, Sílvia
  • Labella, Jorge
  • Szczepanik, Dariusz W.
  • Poater Teixidor, Albert
  • Torres, Tomas
  • Solà i Puig, Miquel
  • Matito i Gras, Eduard
The development of novel synthetic methods has greatly expanded the toolbox available to chemists for engineering porphyrin and phthalocyanine derivatives with precise electronic and optical properties. In this study, we focus on the UV-vis absorption characteristics of substituted phthalocyanines and their contracted analogs, subphthalocyanines, which feature nonplanar, bowl-shaped geometries. These macrocycles, which are central to numerous applications in materials science and catalysis, possess extensive π-conjugated systems that drive their unique electronic properties. We explore how the change from a metalloid (B) to a metal (Zn) and the resulting coordination environments influence the aromaticity and, consequently, the spectroscopic features of these systems. A combined computational and experimental approach reveals a direct correlation between the aromaticity of the external conjugated pathways and the Q bands in the UV-vis spectra. Our findings highlight key structural modifications that can be leveraged to fine-tune the optical properties of porphyrinoid systems, offering new pathways for the design of advanced materials and catalysts with tailored functionalities, S.E. is grateful to Universitat de Girona and DIPC for an IFUdG2019 PhD fellowship. E.M., A.P., and M.S. are grateful for financial support from Agencia Española de Investigación for projects: PID2022-140666NB-C21, PID2021-127423NB-I00, RED2022-134939-T, PID2020-113711GB-I00, and PID2023-147424NB-I00 funded by MCIN/AEI/10.13039/501100011033 and “FEDER Una manera de hacer Europa”. E.M. acknowledges the Gobierno Vasco grant PIBA_2023_1_0055 and IT588-22. A.P. and M.S. also acknowledge Generalitat de Catalunya for Project 2021SGR623 and ICREA Academia prize 2019 to A.P. A.P. is a Serra Húnter fellow. D.W.S. thanks the computer facilities provided by the Polish high-performance computing infrastructure PLGrid (HPC Centers: ACK Cyfronet AGH) within computational grant no. PLG/2022/015950. T.T. acknowledges financial support from the Spanish MCIN/AEI/10.13039/501100011033 and European Union NextGenerationEU/ PRTR (PID2020-116490GB-I00, TED2021-131255B-C43), MCIU /AEI /10.13039/501100011033 / FEDER, UE (PID2023-151167NB-I00), the Comunidad de Madrid and the Spanish State through the Recovery, Transformation and Resilience Plan [“Materiales Disruptivos Bidimensionales (2D)” (MAD2D-CM) (UAM1)-MRR Materiales Avanzados], and the European Union through the Next Generation EU funds. IMDEA Nanociencia acknowledges support from the “Severo Ochoa” Programme for Centres of Excellence in R&D (MINECO, Grant SEV2016-0686). T.T. also acknowledges the Alexander von Humboldt Foundation (Germany) for the A. v. Humboldt─J. C. Mutis Research Award 2023 (ref 3.3-1231125─ESP-GSA). J.L. acknowledges MECD, Spain, for an F.P.U. fellowship, Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Novel Method for Dynamic Molecular Weight Distribution Determination in Organometallic Catalyzed Olefin Polymerizations

  • Shiri, Masoud
  • Parvazinia, Mahmoud
  • Yousefi, Ali Akbar
  • Bahri-Laleh, Naeimeh
  • Poater Teixidor, Albert
In this study, a mathematical model for the time evolution of molecular weight distribution (MWD) was developed. This temporal model is based on the well-known Ziegler–Natta polymerization mechanism and reaction kinetics by the parametric solving of related differential equations. However, due to the generality of the reactions involved, the model can be extended to the other type of catalysts, such as metallocenes, Phillips, etc. The superiority of this model lies in providing the possibility of a more precise prediction over the active sites and kinetic parameters using a simple mathematical equation, which leads to improved reactor design in large-scale production. The model uses a function to develop a methodology for MWD calculations. In this way, the transient response is limited to the first few minutes of the reaction; however, it is important as it demonstrates the establishment of the final MWD. According to the results, almost for practical conditions with negligible transfer resistances, the time dependency of the MWD has a transient interval, depending on the kinetic constants of polymerization reactions. Increasing the time to infinity results in an increase in MW and a widening in MWD, which confirms the experimental plots well. In short, the main advantage of our proposed model over the previous ones is its ability to predict the MWD even before the completion of the polymerization reaction. The results of the present model match well with those of the well-known Schulz–Flory distribution, which only predicts the final molecular weight distribution, thus confirming that the model is reliable and generalizable, Spanish MINECO for project ref. PID2021-127423NB-I00
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Carbon Dioxide Conversion on Supported Metal Nanoparticles: A Brief Review

  • Posada-Pérez, Sergio
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
The increasing concentration of anthropogenic CO2 in the air is one of the main causes of global warming. The Paris Agreement at COP 21 aims to reach the global peak of greenhouse gas emissions in the second half of this century, with CO2 conversion towards valuable added compounds being one of the main strategies, especially in the field of heterogeneous catalysis. In the current search for new catalysts, the deposition of metallic nanoparticles (NPs) supported on metal oxides and metal carbide surfaces paves the way to new catalytic solutions. This review provides a comprehensive description and analysis of the relevant literature on the utilization of metal-supported NPs as catalysts for CO2 conversion to useful chemicals and propose that the next catalysts generation can be led by single-metal-atom deposition, since in general, small metal particles enhance the catalytic activity. Among the range of potential indicators of catalytic activity and selectivity, the relevance of NPs’ size, the strong metal–support interactions, and the formation of vacancies on the support are exhaustively discussed from experimental and computational perspective, This research was funded by the Spanish Ministerio de Ciencia e Innovación (projects PID2021-127423NB-I00 to A.P. and PID2020-113711GB-I00 to M.S.) and the Generalitat de Catalunya (project 2021 SGR0623 and ICREA Academia prize 2019 to A.P.). S.P.-P. appreciates the economic support of the Marie Curie fellowship (H2020-MSCA-IF-2020-101020330), 13
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Predictive catalysis: a valuable step towards machine learning

  • Monreal Corona, Roger
  • Pla i Quintana, Anna
  • Poater Teixidor, Albert
As physical chemistry transitioned to computational chemistry, a new growth occurred in the field with the advent of predictive catalysis, making it a key player in the optimization and development of catalytic processes. Predictive catalysis refers to the use of computational and theoretical methods to predict the properties and behavior of chemical systems and, more specifically, their catalytic activity and selectivity. In this analysis, we take a look at what predictive catalysis has done to date and build a picture of how far it can go in the future, while also outlining the challenges that need to be resolved to make it a powerful tool of general applicability, A.P. and A.P.-Q. are Serra Húnter Fellows. A.P. received ICREA Academia Prize 2019. We thank the Spanish Ministerio de Ciencia e Innovación for projects PID2021-127423NB-I00 (to A.P.) and PID2020-113711GB-I00 (to A.P.-Q.) and the Generalitat de Catalunya for project 2021SGR623. We thank the Spanish Ministerio de Universidades for the predoctoral fellowship FPU20/00707 to R.M.-C
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Ionic liquids as modifier for the oligomerization of α-olefins to reactive poly (α-olefins) via traditional AlCl3 catalyst

  • Mashayekhi, Miad
  • Moballegh, Leila
  • Bahri-Laleh, Naeimeh
  • Sadjadi, Samahe
  • Poater Teixidor, Albert
In the polymerization there are series of systems that are traditionally used because their procedures are well established, and it is not considered necessary to leave the comfort zone. Here, it is proposed to reevaluate the cationic initiator system with a trident of IL/AlCl3/H2O (IL: ionic liquid). Thus, different ILs comprising of similar anionic part, however various cationic moieties; based on triethanolamine (TEA), tributylamine (TBA), and pyridine (Pyr) precursors; were synthesized and evaluated together with AlCl3 in the cationic polymerization of 1-decene. According to the GPC results, while Pyr and TBA-based ILs suppressed molar mass of poly(α-olefins) (PAO), compared to PAO from neat AlCl3, TEA containing IL enhanced it. This affirms outstandingly higher performance of the IL/AlCl3 than AlCl3/H2O. According to the 13C NMR data, PAOs from IL containing initiators have higher content of long chain branching, which is beneficial to improved viscosity index characteristic. Kinematic viscosity results were in accordance with the molar mass and 13C NMR data. 1H NMR spectra point to the fact that PAOs derived from TEA and TBA-based ILs generate exo-olefins, a type of vinyl that leads to reactive oligomers with potential capacity for block copolymers. DFT theoretical calculations and studies of non-covalent interactions help to separate and understand how the nature of the IL translates into such different properties, We thank the Spanish Ministerio de Ciencia e Innovación for project PID2021–127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

In the quest of Hückel–Hückel and Hückel–Baird double aromatic tropylium (tri)cation and anion derivatives

  • Escayola Gordils, Sílvia
  • Proos Vedin, Nathalie
  • Poater Teixidor, Albert
  • Ottosson, Henrik
  • Solà i Puig, Miquel
Besides the most common form of aromaticity involving a π-ring, hexaiodobenzene and hexakis(phenylselenyl)benzene dications also present σ-aromaticity in the outer ring formed by the main group substituents. These two compounds are considered σ- and π-double aromatic, and their characterization is of special interest to the fields of organic and structural chemistry. In this work, we decided to explore the double aromaticity in substituted tropylium cations for three reasons: (i) the seven neutral halogen substituents of the tropylium cations will, without oxidation, lead to 14 σ-electrons (a 4n + 2 Hückel number); (ii) tropylium cations are highly stable and can be easily generated experimentally; and (iii) whereas in substituted benzenes the distances between substituents in the optimized structures or X-ray crystals are too large to allow strong σ-aromaticity, these distances are expected to be shorter in substituted tropylium cations. Yet, instead of the expected σ-aromaticity, we found that the most stable geometries are highly puckered, meaning that delocalization in both π- and σ-systems is lost. Our results, which include also the tropylium anion and trication in the singlet and triplet state, show that there is a need to open a lone pair hole by oxidation to generate σ-aromaticity. Among the systems studied, only triplet C7Br7+3 with an internal Hückel aromatic tropylium ring and an external incipient Baird aromatic Br7 ring shows double π- and σ-aromaticity. This result, however, is functional-dependent and reveals that 3C7Br73+ is at the borderline for onset of double aromaticity, Generalitat de Catalunya. Grant Number: 2017SGR39 Ministerio de Ciencia e Innovación. Grant Numbers: PID2020-113711GB-I00, PID2021-127423NB-I00 Swedish Research Council. Grant Number: 2019-05618 Universitat de Girona. Grant Number: IFUdG2019 Swedish National Infrastructure for Computing, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Design and Synthesis of a Novel Catalytic System Based on Pd Supported on Alumina Extrudates for Hydrotreating of PAO Lubricants

  • Karimi, Mahsa
  • Sadjadi, Samahe
  • Arabi, Hassan
  • Bahri-Laleh, Naeimeh
  • Poater Teixidor, Albert
The development of hydrogenation processes for polyalphaolefin (PAO) lubricants, which hold commercialization potential, is a challenging endeavor. Here, we synthesized and characterized rod-shaped γ-alumina supported Pd catalyst for PAO hydrofinishing, comparing it with γ-alumina supported Ni catalyst. Results indicated that Pd/Al2O3 catalyst efficiently promoted PAO hydrofinishing, whereas Ni-based catalyst exhibited lower activity. Optimization of reaction variables using the one-factor-at-a-time method revealed that hydrogenated polyalphaolefin could be achieved with a 90% yield using a 5 wt.% catalyst, a hydrogen pressure of 12 bar, at 130°C after 7 h. The superior performance of the fabricated catalysts, coupled with the use of rod-shaped alumina suitable for large-scale hydrogenation reactors, suggests the versatility of the process for potential commercialization. Additionally, the higher performance of Pd/alumina compared to Ni/alumina catalyst was computationally assessed at the molecular level using DFT methods, Finançament: AP és Beca Serra Húnter i va comptar amb el suport de la Institució Catalana de Recerca i Estudis Avançats (ICREA) Premi Acadèmia 2019 i agraeix al Ministeri de Ciència, Innovació i Universidades (MINECO) espanyol pel projecte PID2021-127423NB-I00 i la Generalitat. de Catalunya per al projecte 2021SGR623. El temps de càlcul al superordinador MARENOSTRUM (QHS-2022-3-0029) ha estat proporcionat pel Barcelona Supercomputing Center a través d'una beca de Red Española de Supercomputación, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tuning the steric hindrance of alkylamines: a predictive model of steric editing of planar amines

  • Tomasini, Michele
  • Voccia, Maria
  • Caporaso, Lucia
  • Szostak, Michal
  • Poater Teixidor, Albert
Amines are one of the most prevalent functional groups in chemistry. Perhaps even more importantly, amines represent one of the most ubiquitous moieties within the realm of bioactive natural products and life-saving pharmaceuticals. The archetypal geometrical property of amines is their sp3 hybridization with the lone pair of nitrogen occupying the apex of the pyramid. Herein, we present a blueprint for quantifying the properties of extremely sterically hindered alkylamines. These amines reach planarity around the nitrogen atom due to the excessive steric hindrance, which results in a conformational re-modeling of the amine moiety. Crucially, the steric properties of amines are characterized by the %VBur index, which we show is a general predictive parameter for evaluating the properties of sterically hindered amines. Computational studies on the acidic nature and the reactivity of organometallic Au and Pd complexes are outlined. Density functional theory calculations permit for predictive catalysis, ordering the mapping of extremely hindered tertiary amines by employing artificial intelligence via machine learning. Overall, the study outlines the correlation between the unusual geometry and the key thermodynamic and kinetic properties of extremely hindered alkylamines. The steric hindrance, as quantified by %VBur, is the crucial factor influencing the observed trends and the space required to accommodate sterically hindered tertiary amines, M. S. thanks the NIH (1R35GM133326), the NSF (CAREER CHE1650766), and Rutgers University for generous financial support. A. P. is a Serra Hunter Fellow. A. P. received ICREA Academia Prize ´ 2019. We thank the Spanish Ministerio de Ciencia e Innovaci´on for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623, Open Access funding provided thanks to the CSUC agreement with Royal Society of Chemistry (RSC)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Indolizine Synthesis through Annulation of Pyridinium 1,4-Thiolates and Copper Carbenes: A Predictive Catalysis Approach

  • Monreal Corona, Roger
  • Díaz Jiménez, Àlex
  • Roglans i Ribas, Anna
  • Poater Teixidor, Albert
  • Pla i Quintana, Anna
Predictive catalysis was applied to the reaction of pyridinium 1,4-zwitterionic thiolates with a copper carbene. Theoretical calculations were first performed to determine the suitability of their annulation reaction and to make predictions about the performance of different copper salts, diazo species, and pyridinium derivatives. With calculations in hand, the experimental conditions were optimized, the scope of the reaction was assessed, and the precision of the predictions was evaluated. Yields up to 90% were obtained for the synthesis of indolizine scaffolds in the reactivity of pyridinium 1,4-zwitterionic thiolates with a metal carbene, Ministerio de Ciencia e Innovación. Grant Numbers: PID2021-127423NB-I00, PID2020-113711GB-I00, MCIN/AEI/10.13039/501100011033, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Towards the activity of twisted acyclic amides

  • Tomasini, Michele
  • Caporaso, Lucia
  • Szostak, Michal
  • Poater Teixidor, Albert
N,N-Boc2 amides have emerged as the most common class of acyclic twisted amides that have been engaged in a range of C–N activation and cross-coupling processes of ubiquitous amide bonds. These amides are readily synthesized from primary amides through a site-selective tert-butoxycarbonylation. Due to the steric bulk of di-tert-butoxy groups, these amides exhibit significant C N bond twisting, which promotes N–C bond cleavage, facilitating their use in cross-coupling reactions. Herein, we present a computational blueprint for the C N bond rotation in N,N-Boc2 amides, revealing that the rotational barrier and twist angle (τ) are influenced by the nature of the substituents at the sp2 carbon position. Sterically hindered substituents exhibit the highest distortions, leading to lower rotation barriers. Rotation along the C N bond is accompanied by phenyl ring rotation to minimize steric clashes. A strong correlation between the rotational barriers and the HOMO energies is observed. These findings provide key insights into the fundamental role of amide bond distortion in C–N activation processes, A. P. thanks the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. Open Access funding provided thanks to the CRUE-CSIC agreement with RSC
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

H-Bonding leading to latent initiators for olefin metathesis polymerization

  • Brotons Rufes, Artur
  • Bahri-Laleh, Naeimeh
  • Poater Teixidor, Albert
Ruthenium–NHC based catalysts, with a chelated iminium ligand trans to the N-heterocyclic carbene (NHC) ligand, that polymerize dicyclopentadiene (DCPD) at different temperatures are monitored using Density Functional Theory calculations to unveil the reaction mechanism, and subsequently how important are the geometrical and electronic features vs. the non-covalent interactions in between. The balance is very fragile and H-bonds are fundamental to explain the different behaviour of latent catalysts. This computational study aims to facilitate future studies of new generations of latent initiators for olefin metathesis polymerization, with the 3D and mainly the 2D Non-Covalent Interaction plots the characterization tool for H-bonds, We thank the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00, Open Access funding provided thanks to the CSUC agreement with Royal Society of Chemistry (RSC)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Precise Control of the Site-Selective in Ruthenium-Catalyzed C-H Bond Amidations by Cyclic Amides as Powerful Directing Groups

  • Yuan, Yu-Chao
  • Lu, Qiu-Li
  • Zhu, Xiao Tong
  • Posada-Pérez, Sergio
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
  • Roisnel, Thierry
  • Gramage Doria, Rafael
Selective C-H functionalizations aiming at the formation of new C-N bonds is of paramount importance in the context of step- and atom-economy methodologies in organic synthesis. Although the implementation of noble metal catalysts is prevalent, more benign cobalt pre-catalysts have recently appeared to be promising. However, they sometimes feature selectivity issues that limit their applicability in late-stage functionalization. Herein, we report on a highly reactive ruthenium-based catalytic system displaying excellent levels of mono-, regio- and site-selectivity by exploiting a series of biologically-relevant cyclic amides as weak directing groups. The use of dioxazolone derivatives as amidating reagents overcomes the issues encountered in the use of unstable azide derivatives for such transformations and it enables us to perform these reactions under very mild reaction conditions (air, 40 °C). Moreover, a combination of deuteration experiments and a comparative study with different types of directing groups highlights the relevance of weak amide directing groups for enabling the formation of six-membered cycloruthenate intermediates in the key elementary steps of the catalytic cycle. In addition, DFT computational calculations were carried out for the first time for studying ruthenium-catalyzed C-N bond-forming processes via C-H activation assisted by weak directing groups, thereby elucidating the origin of the regio- and site-selectivity, Y.-C. Y. acknowledges the Science and Technology of XuZhou (KC19042) for financial support. We also thank the Public Experimental Research Center, Xuzhou Medical University, for NMR determination. R. G-D. acknowledges the ANR-JCJC scheme (ANR-19-CE07-0039), CNRS and the University of Rennes 1 for financial support. S. P. P. thanks the Marie Curie fellowship (H2020-MSCA-IF-2020-101020330). A. P. is a Serra Húnter Fellow and thanks ICREA Academia Prize 2019 and Spanish Mineco for project ref. PGC2018-097722-B-I00. A. P. and M. S. thank the Spanish Ministerio de Ciencia e Innovación for projects PID2021-127423NB-I00 and PID2020-13711GB-I00 and the Generalitat de Catalunya for project 2017SGR39
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Head-to-Tail Selective [2 + 2 + 2] Cycloadditions of Bisallenes Enabled by Ligand-Free Nickel(0)

  • Kennington, Stuart C. D.
  • Mandal, Mou
  • Monreal Corona, Roger
  • Saha, Arijit
  • Poater Teixidor, Albert
  • Roglans i Ribas, Anna
  • Pla i Quintana, Anna
A ligand-free Ni(0) catalyst enables highly chemo- and regioselective [2 + 2 + 2] cycloadditions between 1,5-bisallenes and acetylenes, affording 6,6-fused hexahydroisoquinoline frameworks under mild conditions. DFT studies reveal that head-to-tail selectivity arises from competing oxidative cyclization pathways with metallacycle geometry dictating product formation. This work highlights how simple nickel complexes can achieve precise molecular construction without the need for ancillary ligands, We are grateful for the financial support from the Spanish Ministerio de Ciencia, Innovación y Universidades (Projects PID2023-146849NB-I00/MICIU/AEI/10.13039/ 501100011033/FEDER, UE, RED2022-134939-T, PID-2021-127423NB-I00, predoctoral FPU20/00707 grant to R.M.-C., and Margarita Salas Grant (NextGenerationEU) to S.C.D.K.),a Beatriu de Pinós−AGAUR Postdoctoral Grant (2022 BP00051) to A.S., and the Generalitat de Catalunya (Project 2021-SGR-623). M.M. thanks the Ministerio de Ciencia, Innovación y Universidades for her fellowship (PID2021 127423NB-I00), Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving Environmental Stress Cracking Resistance of High-Density Polyethylene Grades by Comonomer Addition and Nanocomposite Approach

  • Mansouri, AmirMohammad
  • Ghasemi Hamedani, Nona
  • Zou, Chen
  • Mousavi, Saber
  • Ali Khonakdar, Hossein
  • Bahri-Laleh, Naeimeh
  • Rodríguez Pizarro, Montserrat
  • Brotons Rufes, Artur
  • Posada-Pérez, Sergio
  • Poater Teixidor, Albert
The aim is to determine the effect of polymer density, correlated to the comonomer content, and nanosilica addition on the mechanical and Environmental Stress Cracking Resistance (ESCR) characteristics of high-density polyethylene (HDPE). In this regard, five HDPE samples with similar Melt Flow Index (MFI) and molar mass but various densities were acquired from a petrochemical plant. Two polymerization reactors work in series and differ only in the amount of 1-buene comonomer fed to the second reactor. To ascertain the microstructure of the studied samples, GPC and SSA (successive self-nucleation and annealing) analyses were accomplished. All samples resulted having similar characteristics but slightly various SCB/1000C=7.26-9.74 (SCB=Short Chain Branching). Consequently, meanwhile studied HDPEs reveal similar notched impact and stress at yield values, the tensile modulus, stress-at-break, and elongation-at-break tend to demonstrate different results with the SCB content. More significantly, ESCR characteristic varied considerably with SCB/1000C extent, so that higher amount of SCB acknowledged advanced ESCR. Notably, blending HDPE sample containing higher amount of SCB/1000C, with 3 wt.% of chemically modified nanosilica enhanced ESCR characteristic by 40%. DFT (Density Functional Theory) calculations unveiled the role of the comonomer, quantitatively by binding energies and qualitatively by Non Covalent Interaction (NCI) plots, We thank theSpanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project2021SGR623. A.P. is a Serra Húnter Fellow, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Catalyst-Directed Selectivity in Vinylcarbene Reactions: A Comparative Study of Ag, Rh, and Cu Complexes

  • Monreal Corona, Roger
  • Díaz Jiménez, Àlex
  • Pérez, Pedro J.
  • Caballero Bevia, Ana
  • Roglans i Ribas, Anna
  • Poater Teixidor, Albert
  • Pla i Quintana, Anna
A comprehensive mechanistic investigation is conducted to uncover the factors governing the selectivity of Ag, Rh, and Cu catalysts in vinylcarbene-mediated reactions. The study examines the preference for carbenic versus vinylogous C(sp3)H bond insertion, highlighting the critical roles of the electronic and steric properties of transition metal catalysts. Contrary to previous assumptions that the enhanced electrophilic character of the vinylogous position in metal vinyl carbenes is the primary determinant, the findings demonstrate that the stereoelectronic effects of the ligand play a more dominant role. These insights inform the design of catalytic systems with tailored selectivity, advancing predictive catalysis and CH bond functionalization, Research funding: Ministerio de Ciencia e Innovación. Grant Number: PID2021-127423NB-I00, PID2023-146946NB-I00, PID2023-146849NB-I00/MICIU/ AEI/10.13039/501100011033/FEDER; OASIS Network. Grant Number: RED2022-134074-T and Generalitat de Catalunya. Grant Number: 2021-SGR-623. Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Rhenium Alkyne Catalysis: Sterics Control the Reactivity

  • Tomasini, Michele
  • Gimferrer Andrés, Martí
  • Caporaso, Lucia
  • Poater Teixidor, Albert
Metathesis reactions, including alkane, alkene, and alkyne metatheses, have their origins in the fundamental understanding of chemical reactions and the development of specialized catalysts. These reactions stand as transformative pillars in organic chemistry, providing efficient rearrangement of carbon–carbon bonds and enabling synthetic access to diverse and complex compounds. Their impact spans industries such as petrochemicals, pharmaceuticals, and materials science. In this work, we present a detailed mechanistic study of the Re(V) catalyzed alkyne metathesis through density functional theory calculations. Our findings are in agreement with the experimental evidence from Jia and co-workers and unveil critical factors governing catalyst performance. Our work not only enhances our understanding of alkyne metathesis but also contributes to the broader landscape of catalytic processes, facilitating the design of more efficient and selective transformations in organic synthesis, .P. is a Serra Húnter Fellow and received ICREA Academia Prize 2019. We thank the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. M.G. thanks being partially funded by the Deutsche Forschungsgemeinschaft (DFG, German Research Foundation)─217133147/SFB 1073, project C03, Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A Non Expected Alternative Ni(0) Species in the Ni-Catalytic Aldehyde and Alcohol Arylation Reactions Facilitated by a 1,5-Diaza-3,7-diphosphacyclooctane Ligand

  • Heitkämper, Juliane
  • Posada-Pérez, Sergio
  • scayola Gordils, Sílvia
  • Solà i Puig, Miquel
  • Kästner, Johannes
  • Poater Teixidor, Albert
For decades there were many attempts to dispense with stoichiometric amounts of metal reagents for the synthesis of secondary alcohols. In 2021, the synthetic results of Newman and collaborators pioneered a synthesis still with metals, but not as reactants. Instead, they serverd as catalytic engines. Here we present a description by means of Density Functional Theory calculations of how this process can occur, and an attempt is made to shed light on the mechanism that facilitates the attainment of secondary alcohols, emphasizing the eternal cross-coupling debate of whether the catalytically active species is Ni(0) or they are really taking shortcuts following the course of Ni(II). Effective Orbital analyses give a clear picture. Furthermore, this paper provides insight not only into the nature of the ligands of the metal catalyst but also the role of the base, Institució Catalana de Recerca i Estudis Avançats. Grant Number: ICREA Academia 2019 Studienstiftung des Deutschen Volkes Ministerio de Ciencia e Innovación. Grant Numbers: FJC2019-039623-I, PID2020-13711GB-I00, PID2021-127423NB-I00 Deutsche Stiftung für Herzforschung. Grant Number: INST 40/575-1 FUGG H2020 Marie Skłodowska-Curie Actions. Grant Number: H2020-MSCA-IF-2020-101020330, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Hydrogen autotransfer with alcohols for alkylations

  • Joly, Nicolas
  • Gaillard, Sylvain
  • Poater Teixidor, Albert
  • Renaud, Jean Luc
Despite the advancements enabled by organometallic complexes in organic synthesis, which have led to innovative transformations and tackled issues related to waste and atom economy, concerns persist regarding the cost of noble metals and ligands. Expanding on previous work, iron and ruthenium complexes with cyclopentadienone ligands, akin to Knölker catalysts, have demonstrated remarkable efficiency in bond reduction and alkylations using alcohols as pro-electrophiles. This review delves into novel alkylation methodologies involving hydrazides or ketones, inventive dehydrogenative coupling reactions yielding highly functionalized structures, and the optimization of metal-catalysed reactions through organometallic complex modifications. Metal-catalysed hydrogen auto-transfer, or hydrogen borrowing, offers a sustainable approach to forming C–C or C–N bonds from eco-friendly alcohols. While transitioning the diaminocyclopentadienone tricarbonyl ligand to first-row transition metals under mild conditions remains challenging, recent findings indicate that blue-light irradiation at room temperature can facilitate this transformation without external photosensitizers. Thus, while conventional studies without light remain demanding, the incorporation of light can enhance this research domain, where such catalysts may play a pivotal role. Moreover, further exploration of asymmetric catalysis is warranted. This review aims to benefit not only the community working with Knölker derivative catalysts but also organic chemists seeking potential applications and inorganic chemists interested in catalyst development, particularly in pursuit of catalysts for asymmetric syntheses. Additionally, the focus on sustainability makes it relevant for chemists dedicated to green chemistry, We gratefully acknowledge financial support from the “Ministère de la Recherche et des Nouvelles Technologies”, Normandie Université, University of Caen Normandie, CNRS, “Région Normandie”, the LABEX SynOrg (ANR-11-LABEX-0029), and European Union (HORIZON-MSCA-2022-DN-01 Project: 101119574). We thank the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. A. P. is a Serra Húnter Fellow and ICREA Academia Prize 2019, Open Access funding provided thanks to the CSUC agreement with Royal Society of Chemistry (RSC), 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Stereoretentive Formation of Cyclobutanes from Pyrrolidines: Lessons Learned from DFT Studies of the Reaction Mechanism

  • Monreal Corona, Roger
  • Solà i Puig, Miquel
  • Pla i Quintana, Anna
  • Poater Teixidor, Albert
The stereoselective synthesis of cyclobutanes that possess an array of stereocenters in a contiguous fashion has attracted the wide interest of the synthetic community. Cyclobutanes can be generated from the contraction of pyrrolidines through the formation of 1,4-biradical intermediates. Little else is known about the reaction mechanism of this reaction. Here, we unveil the mechanism for this stereospecific synthesis of cyclobutanes by means of density functional theory (DFT) calculations. The rate-determining step of this transformation corresponds to the release of N2 from the 1,1-diazene intermediate to form an open-shell singlet 1,4-biradical. The formation of the stereoretentive product is explained by the barrierless collapse of this open-shell singlet 1,4-biradical. The knowledge of the reaction mechanism is used to predict that the methodology could be amenable to the synthesis of [2]-ladderanes and bicyclic cyclobutanes, The authors thank the Spanish Ministerio de Ciencia e Innovación for projects PID2021127423NB-I00 (to A.P.) and PID2020-113711GB-I00 (to M.S. and A.P.-Q.) and the Generalitat de Catalunya for project 2021SGR623, Open Access funding provided thanks to the CRUE-CSIC agreement with ACS
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of the Ethanol Content of Adduct on the Comonomer Incorporation of Related Ziegler–Natta Catalysts in Propylene (Co)polymerizations

  • Mehdizadeh, Mohammadreza
  • Karkhaneh, Fereshteh
  • Nekoomanesh-Haghighi, Mehdi
  • Sadjadi, Samahe
  • Emami, Mehrsa
  • Teimoury, HamidReza
  • Salimi, Mehrdad
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
  • Bahri-Laleh, Naeimeh
  • Posada-Pérez, Sergio
The aim of this work is to investigate the influence of the ethanol content of adducts on the catalytic behavior of related Ziegler–Natta (ZN) catalysts in propylene homo- and copolymerizations (with 1-hexene comonomer) in terms of activity, isotacticity, H2 response, and comonomer incorporation. For this purpose, three MgCl2.nEtOH adducts with n values of 0.7, 1.2, and 2.8 were synthesized and used in the synthesis of related ZN catalysts. The catalysts were thoroughly characterized using XRD, BET, SEM, EDX, N2 adsorption–desorption, and DFT techniques. Additionally, the microstructure of the synthesized (co)polymers was distinguished via DSC, SSA, and TREF techniques. Their activity was found to enhance with the adduct’s ethanol content in both homo- and copolymerization experiments, and the increase was more pronounced in homopolymerization reactions in the absence of H2. Furthermore, the catalyst with the highest ethanol content provided a copolymer with a lower isotacticity index, a shorter meso sequence length, and a more uniform distribution of comonomer within the chains. These results were attributed to the higher total surface area and Ti content of the corresponding catalyst, as well as its lower average pore diameter, a larger proportion of large pores compared to the other two catalysts, and its spherical open bud morphology. It affirms the importance of catalyst/support ethanol-content control during the preparation process. Then, molecular simulation was employed to shed light on the iso-specificity of the polypropylene produced via synthesized catalysts, This research was funded by the Spanish Ministerio de Ciencia e Innovación for projects PGC2018-097722-B-I00, PID2020-13711GB-I00, and PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. N. Bahri-Laleh is thankful to the Iran National Science Foundation (INSF) for financial support of the work under the grant number of 4006310. S.P.-P. is thankful to the economic support of Marie Curie fellowship (H2020-MSCA-IF-2020-101020330)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Challenges in olefin metathesis: past, present and future

  • Brotons Rufes, Artur
  • Posada-Pérez, Sergio
  • Martínez, Juan Pablo
  • Nolan, Steven P.
  • Poater Teixidor, Albert
Olefin metathesis has become a cornerstone in modern synthetic chemistry, enabling diverse applications across organic synthesis, polymer science, and industrial processes. Despite its transformative impact, significant challenges persist, including catalyst stability, functional group tolerance, selectivity, and scalability. Ruthenium-based catalysts dominate the field, yet their sensitivity to oxygen, moisture, and harsh conditions limits industrial applicability. Functional group incompatibility and the difficulty in achieving precise product selectivity further hinder its versatility, particularly in cross-metathesis (CM) and ring-closing metathesis (RCM). Advances in catalyst recycling, green chemistry practices, and alternative systems using earth-abundant metals like iron are promising but remain underdeveloped. Expanding substrate scope, improving mechanistic understanding, and integrating metathesis with other catalytic processes offer opportunities for innovation. Addressing these issues through predictive catalysis, novel ligand design, and artificial intelligence-driven insights will enhance the sustainability and efficiency of metathesis, cementing its role as a pivotal reaction in future chemical synthesis, A.P. thanks the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. The FWO is gratefully acknowledged for support of this work. J.P.M. acknowledges financial support from the Polish National Science CenterPolish National Science Center through the SONATA‐19 grant UMO‐2023/51/D/ST4/01561 Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

From Stilbenes to carbo-Stilbenes: an Encouraging Prospect

  • Zhu, Chongwei
  • Saquet, Alix
  • Maraval, Valérie
  • Bijani, Christian
  • Cui, Xiuling
  • Poater Teixidor, Albert
  • Chauvin, Remi
Beyond previously described carbo-naphthalene and carbo-biphenyl, a novel type of bis-carbo-benzenic molecules is envisaged from the stilbene parent. The synthesis, structure, spectroscopic and electrochemical properties of two such carbo-stilbenes are described at complementary experimental and computational DFT levels. In the selected targets, the bare skeletal carbo-mer of carbo-stilbene is decorated by 8 or 10 phenyl groups, 0 or 2 tert-butyl groups, and 2 n-octyl chains, the later substituents being introduced to compensate anticipated solubility issues. As in the parent stilbene series, isomers of the phenylated carbo-stilbenes are characterized. The cis- and trans-isomers are, however, formed in almost equal amounts and could not be separated by either chromatography or crystallization. Nevertheless, due to a slow interconversion at the NMR time scale (up to 55 °C) the 1H NMR signals of both isomers of the two carbo-stilbenes could be tentatively assigned. The calculated structure of the cis-isomer exhibits a helical shape, consistent with the observed magnetic shielding of phenyl p-CH nuclei residing inside the shielding cone of the facing C18 ring. The presence of the two isomers in solution also gives rise to quite broad UV-vis absorption spectra with main bands at ca 460, 560 and 710 nm, and a significant bathochromic shift for the decaphenylated carbo-stilbene vs the di-tert-butyl-octaphenylated counterpart. Square wave voltammograms do not show any resolution of the two isomers, giving a reversible reduction wave at −0.65 or −0.58 V/SCE, and an irreversible oxidation peak at 1.11 V/SCE, those values being classical for most carbo-benzene derivatives. Calculated NICS values (NICS(1)=−12.5±0.2 ppm) also indicate that the aromatic nature of the C18 rings is not markedly affected by the dialkynylbutatriene (DAB) connector between them, Institució Catalana de Recerca i Estudis Avançats. Grant Number: ICREA Acadèmia 2019; Ministerio de Ciencia e Innovación. Grant Number: PID2021-127423NB-I00; Generalitat de Catalunya. Grant Number: 2021SGR623; China Scholarship Council. Grant Number: Ph.D. scholarshi & Agence Nationale de la Recherche. Grant Numbers: ANR- 11-BS07-016-01, ANR-18-CE06-00029-01, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

%VBur index and steric maps: from predictive catalysis to machine learning

  • Escayola Gordils, Sílvia
  • Bahri-Laleh, Naeimeh
  • Poater Teixidor, Albert
Steric indices are parameters used in chemistry to describe the spatial arrangement of atoms or groups of atoms in molecules. They are important in determining the reactivity, stability, and physical properties of chemical compounds. One commonly used steric index is the steric hindrance, which refers to the obstruction or hindrance of movement in a molecule caused by bulky substituents or functional groups. Steric hindrance can affect the reactivity of a molecule by altering the accessibility of its reactive sites and influencing the geometry of its transition states. Notably, the Tolman cone angle and %VBur are prominent among these indices. Actually, steric effects can also be described using the concept of steric bulk, which refers to the space occupied by a molecule or functional group. Steric bulk can affect the solubility, melting point, boiling point, and viscosity of a substance. Even though electronic indices are more widely used, they have certain drawbacks that might shift preferences towards others. They present a higher computational cost, and often, the weight of electronics in correlation with chemical properties, e.g. binding energies, falls short in comparison to %VBur. However, it is worth noting that this may be because the steric index inherently captures part of the electronic content. Overall, steric indices play an important role in understanding the behaviour of chemical compounds and can be used to predict their reactivity, stability, and physical properties. Predictive chemistry is an approach to chemical research that uses computational methods to anticipate the properties and behaviour of these compounds and reactions, facilitating the design of new compounds and reactivities. Within this domain, predictive catalysis specifically targets the prediction of the performance and behaviour of catalysts. Ultimately, the goal is to identify new catalysts with optimal properties, leading to chemical processes that are both more efficient and sustainable. In this framework, %VBur can be a key metric for deepening our understanding of catalysis, emphasizing predictive catalysis and sustainability. Those latter concepts are needed to direct our efforts toward identifying the optimal catalyst for any reaction, minimizing waste, and reducing experimental efforts while maximizing the efficacy of the computational methods, We thank the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. A. P. is a Serra Húnter Fellow and ICREA Academia Prize 2019. S. E. thanks Universitat de Girona and DIPC for an IFUdG2019 PhD fellowship, Open Access funding provided thanks to the CSUC agreement with Royal Society of Chemistry (RSC)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

KOtBu Mediated Alcohol Dehydrogenation Strategy: Synthesis of 2-Aryl Quinazolinones

  • Hima, P.
  • Tomasini, Michele
  • Poater Teixidor, Albert
  • Dey, Raju
Herein we report an atom-economical, transition metal-free method for synthesizing 2-aryl quinazolinones through a cascade annulation of 2-amino benzamide and benzyl alcohol. The reaction proceeds via KOtBu-mediated acceptorless alcohol dehydrogenation pathways. The procedure tolerates a wide variety of functional groups and provides a convenient method for the synthesis of 2-aryl quinazolinones. Mechanistic insights by experiments and DFT calculations lead to unveil the reaction mechanism, Science and Engineering Research Board. Grant Number: SRG/2020/002161; NIT Calicut; Serra Húnter Fellow; ICREA Academia Prize 2019; Spanish Ministerio de Ciencia e Innovación. Grant Number: PID2021-127423NB-I00 and Generalitat de Catalunya. Grant Number: 2021SGR623, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Site selective gold(i)-catalysed benzylic C–H amination via an intermolecular hydride transfer to triazolinediones

  • Bevernaege, Kevin
  • Tzouras, Nikolaos V.
  • Poater Teixidor, Albert
  • Cavallo, Luigi
  • Nolan, Steven P.
  • Nahra, Fady
  • Winne, Johan M.
Triazolinediones are known as highly reactive dienophiles that can also act as electrophilic amination reagents towards enolisable C–H bonds (ionic pathway) or weak C–H bonds (free radical pathway). Here, we report that this C–H amination reactivity can be significantly extended and enhanced via gold(I)-catalysis. Under mild conditions, several alkyl-substituted aryls successfully undergo benzylic C–H aminations at room temperature. The remarkable site selectivity that is observed points towards strong electronic activation and deactivation effects, that go beyond a simple weakening of the C–H bond. The observed catalytic C–H aminations do not follow the expected trends for a free radical-type C–H amination and show complementarity to existing methods. Density functional theory (DFT) calculations and distinct experimental trends provide a clear mechanistic rationale for observed selectivity patterns, postulating a novel pathway for triazolinedione-induced aminations via a carbon-to-nitrogen hydride transfer, A. P. thanks the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00. A. P. is a Serra Húnter Fellow and ICREA Academia Prize 2019
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Optimization of Starting Material Composition in the Synthesis of Highly Active Magnesium Ethoxide-Supported Ziegler–Natta Catalysts for Propylene Polymerization

  • Ghasemi Hamedani, Nona
  • Behrouzi-Fardmoghadam, Mina
  • Abedini, Hossein
  • Bahri-Laleh, Naeimeh
We aim to deepen our understanding of the structure-performance relationship in Ziegler–Natta catalysts (ZNCs) for propylene polymerization. To this end, three different Mg(OEt)₂ supports were synthesized by reacting magnesium powder with varying amounts of MnCl₂ during the magnesium-ethanol reaction stage. Despite similar XRD patterns among all obtained Mg(OEt)2 samples, at an optimal MnCl2/Mg ratio of 2 g/g, well-spherically shaped Mg(OEt)2 particles with plate-like building units were formed. The prepared support precursors were then used in ZNC synthesis with different TiCl₄/Mg(OEt)₂ ratios and internal donor types, and their behavior in propylene polymerization was thoroughly explored. The overall results indicated that the optimal Ti/Mg ratio is 8 mol/mol. Additionally, phthalate as an internal donor demonstrated higher activity compared to diethyl ether or succinate-based internal donors. The kinetic curve of propylene uptake versus time in polymerization experiments with varying external donor content was mathematically modeled to evaluate changes in rate constants. The calculated rate constants showed that as the external donor content increases, ktrH, kd, kiED and ktED all enhance, while kp decreases significantly due to the poisoning of active sites by the external donor. These findings highlight the critical role of the type and amount of catalyst components in achieving optimal performance, This work was supported by Iran National Science Foundation (4006310), Institució Catalana de Recerca i Estudis Avançats (ICREA ACADEMIA 2019), Ministerio de Ciencia, Innovación y Universidades (PID2021-127423NB-I00), and Generalitat de Catalunya (2021SGR623), Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lubricant hydrogenation over a functionalized clay-based Pd catalyst: A combined computational and experimental study

  • Asadi, Zahra
  • Sadjadi, Samahe
  • Nekoomanesh-Haghighi, Mehdi
  • Posada-Pérez, Sergio
  • Solà i Puig, Miquel
  • Bahri-Laleh, Naeimeh
  • Poater Teixidor, Albert
In the world of chemical catalysis and with the importance of being especially in the petrochemical industry, hydrogenation reactions play a central role. Within this framework, the hydrogenation of polyalphaolefins (PAOs) is receiving increasing attention. In this work, for the sake of efficiency and to furnish an efficient support for the immobilization of Pd nanoparticles, a new catalyst containing the 1,3-diaminopropane (DAP) diamine for the decoration of the halloysite (HNT) outer surface is used. The resulting catalytic system exhibited high activity in the hydrogenation of PAOs and high catalyst recyclability since it could be used for several reaction runs, with no appreciable loss of the catalytic activity and Pd leaching. In addition, the nature of the heterogeneous catalysis was demonstrated by a hot filtration test. Density functional theory (DFT) calculations not only unveil the reaction mechanism, in which the rate determining step was determined mechanistically, but also confirm the best location of the palladium nanoparticles, placed between the diamino ligands in the halloysite surface. Furthermore, the computational simulations rationalize why experimentally the catalytic process requires hydrogen pressure of 7 bar and temperature of 130°C to reach high yield, Ministerio de Ciencia e Innovación, Grant/Award Numbers: PID2020-113711GB-I00, PGC2018-097722-B-I00; Iran Polymer and Petrochemical Institute, Grant/Award Number: 43794110; MCIN/AEI, Grant/Award Number: PID2021-127423NB-I00; Institució Catalana de Recerca i Estudis Avançats, Grant/Award Number: ICREA Academia 2019; Generalitat de Catalunya, Grant/Award Number: 2017SGR39, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Green Energy by Hydrogen Production from Water Splitting, Water Oxidation Catalysis and Acceptorless Dehydrogenative Coupling

  • Luque Urrutia, Jesús Antonio
  • Ortiz García, Thalía
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
In this review, we want to explain how the burning of fossil fuels is pushing us towards green energy. Actually, for a long time, we have believed that everything is profitable, that resources are unlimited and there are no consequences. However, the reality is often disappointing. The use of non-renewable resources, the excessive waste production and the abandonment of the task of recycling has created a fragile thread that, once broken, may never restore itself. Metaphors aside, we are talking about our planet, the Earth, and its unique ability to host life, including ourselves. Our world has its balance; when the wind erodes a mountain, a beach appears, or when a fire devastates an area, eventually new life emerges from the ashes. However, humans have been distorting this balance for decades. Our evolving way of living has increased the number of resources that each person consumes, whether food, shelter, or energy; we have overworked everything to exhaustion. Scientists worldwide have already said actively and passively that we are facing one of the biggest problems ever: climate change. This is unsustainable and we must try to revert it, or, if we are too late, slow it down as much as possible. To make this happen, there are many possible methods. In this review, we investigate catalysts for using water as an energy source, or, instead of water, alcohols. On the other hand, the recycling of gases such as CO2 and N2O is also addressed, but we also observe non-catalytic means of generating energy through solar cell production, This research was funded by the Spanish Ministerio de Ciencia e Innovación (projects PID2021-127423NB-I00 to A.P. and PID2020-113711GB-I00 to M.S.) and the Generalitat de Catalunya (project 2021 SGR0623 and ICREA Academia prize 2019 to A.P.), 7, 13
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Mechanistic Insights into Nickel–NHC-Catalyzed Alkene Isomerization: A Computational Study on Selectivity and Reactivity

  • Ahmad, Arslan
  • Monreal Corona, Roger
  • Saha, Arijit
  • Pla i Quintana, Anna
  • Posada-Pérez, Sergio
  • Poater Teixidor, Albert
Alkene isomerization holds significant importance in organic chemistry and various chemical industries; however, achieving a high selectivity remains a major challenge. This comprehensive computational investigation delves into the mechanistic parameters governing alkene isomerization catalyzed by a modular Ni(0)/silane system. By systematically analyzing electronic and steric influences of both the substrate and catalyst, the study unveils critical insights into factors that modulate catalytic selectivity and productivity of the isomerized products. In particular, the [3,1]-hydrogen migration pathway in olefins is studied, with a focus on E/Z stereoselectivity. Overall, our findings elucidate the subtle interplay between catalyst design and substrate structure, offering potential design principles for the development of more efficient nickel-catalyzed alkene isomerization processes within synthetic and industrial contexts, We are grateful for financial support from the Ministerio de Ciencia e Innovación (PID2021-127423NB-I00, PID2023-146849NB-I00, and PID2024-155989NB-I00 projects) and the Generalitat de Catalunya (2021-SGR-623). We thank the Spanish Ministerio de Universidades for the predoctoral fellowships FPU20/00707 to R.M.-C. and FPU24/02862 to A.A. A.P. and A.P.Q. are Serra Húnter Fellows. A.P. thanks ICREA Acadèmia 2019. Open Access funding provided thanks to the CRUE-CSIC agreement with ACS. Computational time at the MARENOSTRUM supercomputer has been provided by the Barcelona Supercomputing Centre through a grant from Red Española de Supercomputación (QH-2025-2-0006, QHS-2025-2-0016, QHS-2025-2-0023, and AECT-2025-1-0022). Open Access funding provided thanks to the CRUE-CSIC agreement with ACS
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Single─Not Double─3D-Aromaticity in an Oxidized Closo Icosahedral Dodecaiodo-Dodecaborate Cluster

  • Poater i Teixidor, Jordi
  • Escayola Gordils, Sílvia
  • Poater Teixidor, Albert
  • Teixidor Bombardó, Francesc
  • Ottosson, Henrik
  • Viñas Teixidor, Clara
  • Solà i Puig, Miquel
3D-aromatic molecules with (distorted) tetrahedral, octahedral, or spherical structures are much less common than typical 2D-aromatic species or even 2D-aromatic-in-3D systems. Closo boranes, [BnHn]2– (5 ≤ n ≤ 14) and carboranes are examples of compounds that are singly 3D-aromatic, and we now explore if there are species that are doubly 3D-aromatic. The most widely known example of a species with double 2D-aromaticity is the hexaiodobenzene dication, [C6I6]2+. This species shows π-aromaticity in the benzene ring and σ-aromaticity in the outer ring formed by the iodine substituents. Inspired by the hexaiodobenzene dication example, in this work, we explore the potential for double 3D-aromaticity in [B12I12]0/2+. Our results based on magnetic and electronic descriptors of aromaticity together with 11B{1H} NMR experimental spectra of boron-iodinated o-carboranes suggest that these two oxidized forms of a closo icosahedral dodecaiodo-dodecaborate cluster, [B12I12] and [B12I12]2+, behave as doubly 3D-aromatic compounds. However, an evaluation of the energetic contribution of the potential double 3D-aromaticity through homodesmotic reactions shows that delocalization in the I12 shell, in contrast to the 10σ-electron I62+ ring in the hexaiodobenzene dication, does not contribute to any stabilization of the system. Therefore, the [B12I12]0/2+ species cannot be considered as doubly 3D-aromatic, The authors thank the Spanish Ministerio de Ciencia e Innovación for projects PID2020-113711GB-I00, PID2021-127423NB-I00, PID2022-138861NB-I00, PID-2019-106830GB-I00, and CEX2021-001202-M, the Generalitat de Catalunya for projects 2021SGR623 and 2021SGR442, and the Swedish Research Council for project 2019-05618. A.P. is a Serra Húnter Fellow and ICREA Academia Prize winner (2019). S.E. thanks Universitat de Girona and DIPC for an IFUdG2019 PhD fellowship
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Systematic Investigation of the Role of the Epoxides as Substrates for CO2 Capture in the Cycloaddition Reaction Catalyzed by Ascorbic Acid

  • Ortiz García, Thalía
  • Posada-Pérez, Sergio
  • El-Khchi, Layla
  • Dalmau Ginesta, David
  • Alegre-Requena, Juan V.
  • Solà i Puig, Miquel
  • D'Elia, Valerio
  • Poater Teixidor, Albert
This work establishes a comprehensive theoretical framework for synthesizing cyclic organic carbonates through the cycloaddition of carbon dioxide (CO2) to epoxides under mild pressure and temperature conditions. Using advanced computational techniques, the study examines the thermodynamic and kinetic aspects of the reaction, with a particular focus on epoxide substrates featuring diverse substituents. Detailed analysis reveals activation energy barriers and identifies the rate-determining step, offering crucial insights into the molecular processes governing the reaction. The investigation highlights the significant role of steric and electronic effects in influencing substrate reactivity. Monosubstituted epoxides display stronger steric correlations, while bulkier and disubstituted substrates deviate due to the interplay of steric hindrance and electronic factors such as electrophilicity and chemical hardness. Additionally, localized steric effects and substituent electronegativity emerge as key contributors to transition state stability, with halogenated substrates showcasing nuanced reactivity profiles. Despite these advancements, machine learning models applied in this study demonstrate poor predictive performance, underscoring the challenge of capturing the complex interplay of substrate properties using current descriptors. This highlights the limitations of substrate-based approaches in predicting reaction outcomes. These findings emphasize that catalytic design plays a more decisive role than substrate modification in determining reaction efficiency. This work calls for a systematic exploration of ascorbic acid-based catalyst modifications to optimize energy barriers and improve overall reaction performance, paving the way for rational catalyst design and predictive catalysis in CO₂ valorization, We thank the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI/https://doi.org/10.13039/501100011033/FEDER, UE) for projects PID2021-127423NB-I00 (to A. P.), PID2022-140159NA-I00 (to J. V. A.-R.), PID2023-147424NB-I00 (to M. S.), and RED2022-134939-T (to M. S.), andthe Generalitat de Catalunya for project 2021SGR623, predoctoral FISDUR 2023 grant to T. O.-G. and ICREA Academia Prizes to A. P. (2019) and M. S. (2024). A. P. is a Serra Húnter Fellow. S. P.-P. acknowledges co-funding from the European Union's Horizon 2020 research and innovation Maria Skłodowska-Curie Actions, under grant agreement number 945380. D. D. and J. V. A.-R. acknowledge Gobierno de AragónFondo Social Europeo (Research Group E07_23R). We acknowledge Angie Sacoto for helpful initial testing calculations. V. D. E. thanks the National Research Council of Thailand, grant no. N42A650196, for research support. European Union's Recovery and Resilience Facility-Next Generation (MMT24-ISQCH-01) in the framework of the General Invitation of the Spanish Government's public business entity Red.es to participate in talent attraction and retention programmes within Investment 4 of Component 19 of the Recovery, Transformation and Resilience Plan (MOMENTUM), 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Amino acid ionic liquids as efficient catalysts for CO2 capture: A combined static and dynamic approach

  • Shaikh, Abdul Rajjak
  • Vidal López, Anna
  • Brotons Rufes, Artur
  • Pajski, Jason J.
  • Zafar, Sadain
  • Mahmood, Raisul Awal
  • Khan, Muhammad Usman
  • Poater Teixidor, Albert
  • Chawla, Mohit
  • Cavallo, Luigi
Amino acid ionic liquids (AAILs) have gained significant attention as green solvents that are biocompatible, biodegradable, and useful in various applications, including catalysts, absorbents, and solvents. This study investigates the detailed interactions of three amino acid anions (glycine [Gly]-, histidine [His]-, and arginine [Arg]-) with the cation 1-methoxylbutyl-3-methylimidazolium [MOBMIM]+ and their role in CO2 absorption using quantum mechanical calculations and molecular dynamics (MD) simulations. The Density Functional Theory (DFT) calculations elucidate the reaction mechanisms underlying CO2 absorption and cycloaddition, and facilitate a comparative analysis of the impact of different amino acids on these reactions, and the synergies between them. Notably, arginine displays superior CO2 absorption capacity in comparison to glycine and histidine. Additionally, the cycloaddition reaction with CO2 exhibits a lower energy barrier when arginine is involved. Insights from the MD simulations highlight the higher level of electrostatic interaction between [MOBMIM]+[Arg]- and CO2, relative to the other studied molecules. Moreover, the Lennard Jones interaction emerges as the dominant type of interaction in these systems. The diffusion coefficient for CO2 was highest when interacting with [MOBMIM]+[Gly]-, followed by [MOBMIM]+[Arg]-. Consequently, both MD and DFT investigations converge to suggest that [MOBMIM]+[Arg]- followed by [MOBMIM]+[Gly]- may serve as advantageous choices for CO2 fixation and cycloaddition. The findings from this study underscore the considerable potential of the investigated AAILs as materials conducive to CO2 capture and utilization, thus paving the way for the integration of CO2 capture into valuable chemical products, We thank the Spanish Ministerio de Ciencia e Innovación for project PID 2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

PLA/PMMA Reactive Blending in the Presence of MgO as an Exchange Reaction Catalyst

  • Komeijani, Masoud
  • Bahri-Laleh, Naeimeh
  • Mirjafary, Zohreh
  • D’Alterio, Massimo Christian
  • Rouhani, Morteza
  • Sakhaeinia, Hossein
  • Moghaddam, Amin Hedayati
  • Poater Teixidor, Albert
To address the limitations of poly (lactic acid) (PLA), it was blended with poly (methyl methacrylate) (PMMA) as a toughening component, using MgO nanoparticles (NPs, 0.075–0.15 wt%) as a catalyst. SEM pictures confirmed the good miscibility of the blends. Mechanical tests showed a slight decrease in elastic modulus and tensile strength for the PLA/PMMA125 sample containing 0.125% MgO. Yet, elongation at break rose by over 60% and impact strength increased by over 400% compared to pure PLA. Also, MgO facilitated the shifting of the glass transition temperature (Tg) of both polymers in DSC curves. Additionally, the absence of cold crystallization in PLA, coupled with reductions in its melting temperature (Tm) and crystallinity, were identified as critical factors contributing to improved miscibility within the reactive blend. Melt flow index (MFI) evaluation indicated a decrease in viscosity, while water contact angle measurements revealed an increase in polar groups on the surfaces of the MgO-containing samples. X-ray diffraction (XRD) and transmission electron microscopy (TEM) analyses confirmed the effective distribution and dispersion of NPs throughout the blend, along with a significant decrease in crystallinity. Moreover, DFT calculations were performed to better understand the role of MgO in the reaction. The findings offered key insights into the reaction mechanism, confirming that MgO plays a crucial role in facilitating the transesterification between PLA and PMMA. These findings underscore the enhanced performance of exchange reactions between the active groups of both polymers in the presence of MgO, leading to the formation of PLA-PMMA copolymers with superior miscibility and mechanical properties. Finally, a cell culture assay confirmed the blend’s non-toxicity, showing its versatile potential, This research was funded by the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623. Financial support from the project 3A-Italy, MICS–PNRR MUR-M4C2-I 1.3 (PE00000004) is gratefully acknowledged
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Unveiling the reaction mechanisms of the synthesis and the excited state intramolecular proton transfer of 2-(2′-hydroxyphenyl)imidazo[1,2-a]pyridine

  • Monreal Corona, Roger
  • Stasyuk, Anton J.
  • Solà i Puig, Miquel
  • Pla i Quintana, Anna
  • Poater Teixidor, Albert
Given its wide variety of applications in the pharmaceutical industry, the synthesis of imidazo[1,2-a]pyridines has been extensively studied since the beginning of the last century. Here, we disclose the mechanism for the synthesis of imidazo[1,2-a]pyridines by means of the Ortoleva-King reaction. We also reveal the reaction pathway leading to the formation of a iodinated byproduct, demonstrating the challenge of preventing the formation of such a byproduct because of the low energy barrier to access it. Moreover, quantum chemistry tools were employed to investigate the mechanism of intramolecular proton transfer in the excited state, and connections with aromaticity were explored, ICREA Academia Prize 2019; Ministerio de Ciencia e Innovación. Grant Numbers: PID2021-127423NB−I00, PID2020113711GB−I00</MCIN/AEI/10.13039/501100011033; Generalitat de Catalunya. Grant Number: 2021SGR623 and Spanish government. Grant Number: FPU20/00707, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Clay-supported acidic ionic liquid as an efficient catalyst for conversion of carbohydrates to 5-hydroxymethylfurfural

  • Sadjadi, Samahe
  • Abedian-Dehaghani, Neda
  • Heravi, Majid M.
  • Zhong, Xuemin
  • Yuan, Peng
  • Duran i Carpintero, Josep
  • Poater Teixidor, Albert
  • Bahri-Laleh, Naeimeh
Halloysite nanoclay has been used as a natural support for the immobilization of an acidic ionic liquid with multiple acidic sites. To graft the ionic liquid on the halloysite, amino-functionalized halloysite was reacted with 2,4,6-trichloro-1,3,5-triazine and 2-aminopyrimidine successively to form heterocyclic ligand on halloysite, which was then converted to acidic ionic liquids through reaction with chlorosulfuric acid. The resultant catalyst was then characterized via SEM, EDS, and elemental mapping analysis, FTIR, XRD and TGA. Noteworthy, acid-base titration method confirmed that introduction of acidic ionic liquid significantly improved the Brønsted acidity of halloysite. The catalytic activity of the catalyst was investigated for conversion of various carbohydrates to 5-hydroxymethylfurfural. Gratifyingly, the results showed that the catalyst could promote the reaction of fructose, sucrose, glucose and galactose under mild reaction conditions (catalyst (0.03 g), at 85 °C in 70 min) to give the product in high to excellent yields. Computational DFT studies unveiled the reaction mechanism, pointing out the limiting steps kinetically, and in addition how important are the non-covalent interactions. Furthermore, the recycling tests confirmed high recyclability of the catalyst up to six runs, This research has been supported by the National Natural Science Foundation of China (Grant Nos. 52161145405 and 41972045), Iran National Science Foundation (INSF) under project No. 4000580. The authors also appreciate the partial supports of Iran Polymer and Petrochemical Institute and Al-zahra University. A.P. is grateful for financial support from the Ministerio de Ciencia e Innovación (PID2021-127423NB-I00) and the Generalitat de Catalunya (project 2021 SGR0623) and ICREA Academia prize 2019. A.P. is a Serra Húnter fellow. We thank the support from BSC supercomputing facilities, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Au Single Metal Atom for Carbon Dioxide Reduction Reaction

  • Vidal-López, Anna
  • Posada-Pérez, Sergio
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
CO2 is the gas that contributes the most to the greenhouse effect and, therefore, to global warming. One of the greatest challenges facing humanity is the reduction of the concentration of CO2 in the air. Here, we analyze the possible use of Au1@g-C3N4 electrocatalyst to transform CO2 into add-ed-value products. We use density functional theory (DFT) to determine the reaction Gibbs ener-gies for eight electron-proton transfer reaction paths of the electrochemical carbon dioxide reduc-tion reaction (CO2RR) using a single Au atom supported on 2D carbon nitride support. Our sim-ulations classify the Au1@g-C3N4 electrocatalysts as 'beyond CO' since their formation is energet-ically favored, although their strong binding with a Au single atom does not allow the desorption process. DFT calculations revealed that the lowest energy pathway is CO2(g)→ COOH*→ CO*→ HCO*→ HCOH* → CH2OH* → CH2* →CH3* → CH4(g), where the first hydrogenation of CO to HCO is predicted as the rate-limiting step of the reaction with slightly lower potential than pre-dicted for Cu electrodes, the most effective catalysts for CO2RR. Methane is predicted to be the main reaction product after eight proton-electron transfers (CO2 + 8 H+ + 8e− → CH4 + 2H2O). The generation of formaldehyde is discarded due to the large formation energy of the adsorbed moiety and the production of methanol is slightly less favorable than methane formation. Our computa-tional study helps to identify suitable electrocatalysts for CO2RR by reducing the amount of metal and using stable and low-cost supports, This research was funded by the Spanish Ministerio de Ciencia e Innovación (projects PID2021-127423NB-I00 to A.P. and PID2020-113711GB-I00 to M.S.) and the Generalitat de Catalunya (project 2021SGR0623 and ICREA Academia prize 2019 to A.P.). A.V.-L. is grateful for funding from the pre-doctoral fellowship (PRE2019-089647). S.P.-P. appreciates the economic support of the Marie Curie fellowship (H2020-MSCA-IF-2020-101020330)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

How ionic liquid composition affect Raffinate 1 polymerization in a cationic system?

  • Izadi Kahkeshi, Zahra
  • Necromances Haghighi, Mehdi
  • D'Alterio, Massimo Christian
  • Afi Kheljani, Somayyeh Sadat
  • Sadjadi, Samahe
  • Bahri-Laleh, Naeimeh
  • Poater Teixidor, Albert
This research investigates the polymerization of Raffinate 1 under mild conditions using All₃-based initiating systems incorporating five different ionic liquids: [MIM][HSO₄], [Py][HSO₄], [CycIM]Cl, [PVIMCyc]Cl, and [PVIM][HSO₄]. The resulting polybutenes were characterized to determine exo-olefin content, number-average molecular weight (Mₙ), and molecular weight dispersity (Ð). The exo-olefin content of the polymers was below 12 %, with Mₙ values ranging from 6000 to 9500 g·mol−1 and Ð values below 2.03. Compared to the neat AlCl₃/ethanol system, the incorporation of ionic liquids generally led to polybutenes with lower Mₙ, comparable or slightly higher Ð, and similar exo-olefin content. Deconvolution of the GPC curves revealed that all polymers featured three distinct active sites. Among these, the site producing low-molecular-weight polymer chains exhibited the lowest activity, contributing less than 10 wt% to the total polymer population. Additionally, Density functional theory calculations via Natural Bond Orbital analysis showed that the average NBO charge on aluminum in the (AlCl₃)₂ dimer complexes was more positive for ILs than for PILs and S-ILs. These NBO charges revealed a nonuniform distribution between the two aluminum centers upon bonding with the hydroxyl group, with an increase in positive charge on the aluminum center coordinating the hydroxyl, This research was funded by the Iran National Science Foundation under the grant number of 4023556, and by the Spanish Ministerio de Ciencia e Innovación with projects PID2021-127423NB-I00 and PID2024-155989NB-I00, and the Generalitat de Catalunya with project 2021SGR623. Financial supports from the project 3 A-Italy, MICS–PNRR MUR-M4C2-I 1.3 (PE00000004) are gratefully acknowledged, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Transition metal-free synthesis of 2-aryl quinazolines via alcohol dehydrogenation

  • Hima, P.
  • Vageesh, M.
  • Tomasini, Michele
  • Poater Teixidor, Albert
  • Dey, Raju
We report here a transition metal-free synthesis of quinazoline derivatives starting from 2-aminobenzyl alcohols and aryl amides via an alcohol dehydrogenation strategy promoted by potassium tertiary butoxide. The control experiments are carried out to identify the reaction intermediates and the role of the K+ ion in the reaction. The DFT calculations unveil the reaction mechanism, with special focus on the rate determining state. The present method tolerates a variety of functional groups providing easy access to diversely substituted quinazolines, This research was funded by Ministerio de Ciencia e Innovación for the project PID2021-127423NB-I00, the Generalitat de Catalunya for project 2021SGR623, and ICREA Academia prize 2019 to A.P.; and the Science and Engineering Research Board (SRG/2020/002161) India for a start-up research grant to R.D. A.P. is a Serra Húnter Fellow, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Density Functional Investigation of the Interaction of H2O with Spinel Li1-xMn2O4 Surfaces: Implications for Aqueous Li-ion Batteries

  • Gibu, George
  • Posada-Pérez, Sergio
  • Poater Teixidor, Albert
  • Solà i Puig, Miquel
Aqueous lithium-ion batteries are receiving a lot of attention as large-scale energy storage technology owing to their low-cost, environmentally friendly, and safe behavior in comparison to commercial organic Li-ion batteries. However, aqueous batteries suffer fast degradation due to the interaction of water with electrodes. The O loss has often been claimed to deteriorate the electrode materials and the voltage window accessible for the cathode and anode is limited by aqueous electrolyte decomposition through O2 evolution at the cathode and H2 evolution at the anode. In this work, we use density functional theory simulations to unveil the behavior of spinel Li1-xMn2O4 as cathode material for aqueous Li-ion batteries exploring the Li1-xMn2O4 electrode deterioration at the surface level. The surface stability, O vacancy formation, interaction with water, and oxygen evolution reaction have been investigated at different Li concentrations, suggesting that a partially lithiated (011) surface can produce O2 at low overpotential, and (001) termination can favor the presence of O and OOH intermediates anchored to the surface at 1.23 V, without generating O2. Our work reveals the pros and cons of this material as a cathode for aqueous electrolytes and the importance of surface termination, S.P.P. thanks Marie Curie fellowship (H2020-MSCA-IF-2020-101020330). A.P. is a Serra Húnter Professor and thanks ICREA Academia 2019. A.P. and M.S. thank the Spanish Ministerio de Ciencia e Innovación for projects PID2021-127423NB-I00 and PID2020-13711GB-I00 and the Generalitat de Catalunya for project 2017SGR39 Computational time at the MARENOSTRUM supercomputer has been provided by the Barcelona Supercomputing Centre through a grant from Red Española de Supercomputación, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhancement of Knölker Iron Catalysts for Imine Hydrogenation by Predictive Catalysis: From Calculations to Precise Experiments

  • Joly, Nicolas
  • Gimferrer Andrés, Martí
  • Escayola Gordils, Sílvia
  • Cendra, Maria
  • Coufourier, Sébastien
  • Lohier, Jean François
  • Gaignard Gaillard, Quentin
  • Gaillard, Sylvain
  • Solà i Puig, Miquel
  • Renaud, Jean Luc
  • Poater Teixidor, Albert
The reductive amination reaction of imines catalyzed by Knölker-type iron complexes under hydrogen at high pressure is very interesting in synthetic terms. This type of reaction is an important catalytic challenge, since harsh conditions are necessary and do not occur easily. In a previous work (Organometallics 2022, 41, 1204-1215), we carried out a computational study of the reaction mechanism showing that electron withdrawing groups (EWG) attached to the cyclopentadienone of the Knölker-type iron complexes favor the reductive amination of imines. The synthesis of Knölker-type iron complexes with cyclopentadienones having EWGs is not straightforward, since the direct bonding of EWGs groups on the cyclopentadienone would not lead to the reductive amination but to undesired dimerization. A possible solution consists in the addition of phenyl substituents in the cyclopentadienone of these catalysts and then introduction of EWGs in the phenyl rings. We have performed computational studies using Density Functional Theory (DFT) for the reductive amination of imines to analyze the efficiency of such approach. We have found that some electron withdrawing groups in the phenyl groups facilitate the reductive amination of imines. This computational result has been later on confirmed experimentally, and therefore, we have computationally designed new catalysts that improve the performance of the previous known Knölker-type iron complexes, S.G., N.J., and J.-L.R. gratefully acknowledge financial support from the “Ministère de la Recherche et des Nouvelles Technologies”, Normandie Université, CNRS, and the LABEX SynOrg (ANR-11-LABX-0029). N.J. acknowledges the Graduate School of Research XL-Chem (ANR-18-EURE0020 XL-Chem) for the PhD fellowship. A.P. and M.S. are grateful for financial support from the Ministerio de Ciencia e Innovación (PID2021-127423NB-I00, PGC2018-098212-B-C22, and PID2020-13711GB-I00) and Generalitat de Catalunya for Project 2021SGR623 and ICREA Academia prize 2019. A.P. is a Serra Húnter fellow. M.G. thanks the Generalitat de Catalunya and Fons Social Europeu for a predoctoral fellowship (2018 FI_B01120). S.E. thanks Universitat de Girona and Donostia International Physics Center (DIPC) for an IFUdG2019 predoctoral fellowship. The authors thank Dr. Pedro Salvador for insightful comments, Open Access funding provided thanks to the CRUE-CSIC agreement with American Chemical Society (ACS)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Unraveling Aromaticity: The Dual Worlds of Pyrazole, Pyrazoline, and 3D Carborane

  • Noori, Zahra
  • Solà i Puig, Miquel
  • Viñas Teixidor, Clara
  • Teixidor Bombardó, Francesc
  • Poater i Teixidor, Jordi
A new series of o-carborane-fused pyrazoles has been recently successfully synthesized. This fusion was expected to create a hybrid 3D/2D aromatic system, combining the 3D aromaticity of o-carborane with the 2D aromaticity of pyrazole. However, while the boron cage retains its aromatic character, the pyrazole's aromaticity is lost. As a result, rather than forming o-carborane-fused pyrazoles, the synthesis yielded o-carborane-fused pyrazolines, which are non-aromatic. The limited overlap between the π molecular orbitals (MOs) of the planar heterocycle and the n+1 MOs of the carborane prevents significant electronic delocalization between the two fused components. This contrasts with the fusion of pyrazole and benzene to form indazole, where both rings maintain their 2D aromaticity. Our findings demonstrate that the peripheral σ-aromaticity of carborane and the π-aromaticity of the heterocycle are orthogonal, making a true 3D/2D aromatic system unachievable. The carborane is highly aromatic, generating highly negative NICS values (−25 to −30 ppm). We have observed that these high NICS values extend to fused rings, leading to incorrect estimations of aromaticity. Therefore, relying solely on NICS can be misleading, and other computational indicators, along with experimental or structural data, should be used to accurately assess aromaticity, We thank the Spanish Ministerio de Ciencia, Innovación y Universidades (MCIN/AEI/10.13039/501100011033) for projects PID2019-106832RB-100, PID2023-147424NB-I00, PID2020-113711GB-I00, PID2021-127423NB-I00, PID2022- 138861NB-I00, and CEX2021-001202-M, and the Generalitat de Catalunya for projects 2021SGR623 and 2021SGR442
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

2D Carbon Nitride as Support of Single Cu, Ag, and Au Atoms for Carbon Dioxide Reduction Reaction

  • Posada-Pérez, Sergio
  • Vidal-López, Anna
  • Solà i Puig, Miquel
  • Poater Teixidor, Albert
Electrochemical conversion of CO2 into added-value chemicals is an important approach to recycle CO2. In this work, we have combined the most efficient metal catalysts for this reaction (Cu, Ag, and Au) considering dispersed single atom particles on the two-dimensional carbon nitride support, with the aim of exploring their performance in the CO2 reduction reaction. We report here density functional theory computations showing the effect of single metal atom particles on the support. We find that bare carbon nitride needs a high overpotential to overcome the barrier for the first proton-electron transfer while the second is exergonic. The deposition of single metal atoms enhances the catalytic activity of the system, being the first proton-electron transfer favored in energy, although strong binding energies were found for CO adsorptions with Cu and Au single atoms. Our theoretical interpretations are consistent with the experimental evidence, where the competitive H2 generation is favored due to these strong binding energies. Our computational study paves the road to find suitable metals able to catalyze the first proton-electron transfer reaction together with moderate binding energies of reaction intermediates, to promote the spillover to the carbon nitride support and work as bifunctional electrocatalysts, S. P. P. thanks Marie Curie fellowship (H2020-MSCA-IF-2020-101020330). A. P. is a Serra Húnter Professor and thanks ICREA Academia 2019. A. P. and M. S. thank the Spanish Ministerio de Ciencia e Innovación for projects PID2021-127423NB-I00 and PID2020-13711GB-I00 and the Generalitat de Catalunya for project 2021SGR623. Computational time at the MARENOSTRUM supercomputer has been provided by the Barcelona Supercomputing Centre through a grant from Red Española de Supercomputación (QHS-2022-1-0017 and QHS-2022-2-0012), Open Access funding provided thanks to the CSUC agreement with Royal Society of Chemistry (RSC)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dehydrogenative Coupling Reaction for the Synthesis of 5- and 6-Heterocyclic Derivatives Catalyzed by Earth-Abundant Metal-Based Complexes

  • Joly, Nicolas
  • Mauclaire, Clara
  • Gaillard, Sylvain
  • Poater Teixidor, Albert
  • Renaud, Jean Luc
Heterocycle synthesis is an intense research area due to their significant importance in pharmaceutical, material chemistry and fine synthesis. Key innovations include transition metal-based-catalyzed heterocyclic derivatives synthesis, which facilitates diverse structural modifications, enhances selectivities and efficiency. The necessity to develop more greener technologies for the construction of new C−C and C−N bonds has strived chemists to re-design their synthetic strategy plan and to introduce abundant starting materials. Among these new transformations, acceptorless dehydrogenative coupling (ADC) reactions have received increased attention thanks to their atom-economy, the use of alcohols as pro-electrophiles and the formation of water and hydrogen gas as only by-products. These methods exemplify the interplay between traditional and cutting-edge techniques, providing a robust synthetic toolkit to address the growing demand for biologically relevant compounds with tailored functionalities. This review will focus on the acceptorless dehydrogenative coupling methodologies for the synthesis of nitrogen-containing 5- and 6-membered heterocyclic derivatives (such as pyrroles, pyrimidines, quinazolines, and quinoxalines) in the presence of 3d-metal complexes. The state of the art of the ADC process underscores the continuous evolution of synthetic strategies and emphases its importance in creating valuable and structurally diverse compounds, ensuring their centrality in both academic and pharmaceutical research, We gratefully acknowledge financial support from the “Ministère de la Recherche et des Nouvelles Technologies”, Normandie Université, University of Caen Normandie, CNRS, “Région Normandie”, the LABEX SynOrg (ANR-11-LABEX-0029), and European Union (HORIZON-MSCA-2022-DN-01 Project: 101119574). C. M. thanks Sorbonne University Alliance for a PhD grant. We thank the Spanish Ministerio de Ciencia e Innovación for project PID2021-127423NB-I00 and the Generalitat de Catalunya for project 2021SGR623, Open Access funding provided thanks to the CRUE-CSIC agreement with Wiley
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Au Single Metal Atom for Carbon Dioxide Reduction Reaction

  • Vidal López, Anna|||0000-0003-0812-5521
  • Posada-Pérez, Sergio|||0000-0003-4200-4264
  • Solà i Puig, Miquel|||0000-0002-1917-7450
  • Poater, Albert|||0000-0002-8997-2599
CO2 is the gas that contributes the most to the greenhouse effect and, therefore, to global warming. One of the greatest challenges facing humanity is the reduction of the concentration of CO2 in the air. Here, we analyze the possible use of Au1@g-C3N4 electrocatalyst to transform CO2 into added-value products. We use density functional theory (DFT) to determine the reaction Gibbs energies for eight electron-proton transfer reaction paths of the electrochemical carbon dioxide reduction reaction (CO2RR) using a single Au atom supported on 2D carbon nitride support. Our simulations classify the Au1@g-C3N4 electrocatalysts as "beyond CO" since their formation is energetically favored, although their strong binding with a Au single atom does not allow the desorption process. DFT calculations revealed that the lowest energy pathway is CO2 (g) → COOH* → CO* → HCO* → HCOH* → CH2OH* → CH2* → CH3* → CH4 (g), where the first hydrogenation of CO to HCO is predicted as the rate-limiting step of the reaction with slightly lower potential than predicted for Cu electrodes, the most effective catalysts for CO2RR. Methane is predicted to be the main reaction product after eight proton-electron transfers (CO2 + 8 H+ + 8e- → CH4 + 2H2O). The generation of formaldehyde is discarded due to the large formation energy of the adsorbed moiety and the production of methanol is slightly less favorable than methane formation. Our computational study helps to identify suitable electrocatalysts for CO2RR by reducing the amount of metal and using stable and low-cost supports.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

Highly dispersed Rh single atoms over graphitic carbon nitride as a robust catalyst for the hydroformylation reaction

  • Jurado, Lole|||0000-0003-1908-899X
  • Esvan, Jerome|||0000-0002-8032-6443
  • Luque-Álvarez, Ligia A.|||0000-0002-3998-580X
  • Bobadilla, Luis F.|||0000-0003-0085-9811
  • Odriozola, José A.|||0000-0002-8283-0459
  • Posada-Pérez, Sergio|||0000-0003-4200-4264
  • Poater, Albert|||0000-0002-8997-2599
  • Comas-Vives, Aleix|||0000-0002-7002-1582
  • Axet, M. Rosa|||0000-0002-2483-1533
Rhodium-catalysed hydroformylation, effective tool in bulk and fine-chemical synthesis, predominantly uses soluble metal complexes. For that reason, the metal leaching and the catalyst recycling are still the major drawbacks of this process. Single-atom catalysts have emerged as a powerful tool to combine the advantages of both homogeneous and heterogeneous catalysts. Since using an appropriate support material is key to create stable, finely dispersed, single-atom catalysts, here we show that Rh atoms anchored on graphitic carbon nitride are robust catalysts for the hydroformylation reaction of styrene.
Dipòsit Digital de Documents de la UAB
Publicación Artículo científico (JournalArticle)

2D carbon nitride as a support with single Cu, Ag, and Au atoms for carbon dioxide reduction reaction

  • Posada-Pérez, Sergio|||0000-0003-4200-4264
  • Vidal López, Anna|||0000-0003-0812-5521
  • Solà i Puig, Miquel|||0000-0002-1917-7450
  • Poater, Albert|||0000-0002-8997-2599
The electrochemical conversion of CO into value-added chemicals is an important approach to recycling CO. In this work, we have combined the most efficient metal catalysts for this reaction, namely Cu, Ag, and Au, as single-atom particles dispersed on a two-dimensional carbon nitride support, with the aim of exploring their performance in the CO reduction reaction. Here, we report density functional theory computations showing the effect of single metal-atom particles on the support. We found that bare carbon nitride needed a high overpotential to overcome the energy barrier for the first proton-electron transfer, while the second transfer was exergonic. The deposition of single metal atoms enhances the catalytic activity of the system as the first proton-electron transfer is favored in terms of energy, although strong binding energies were found for CO adsorption on Cu and Au single atoms. Our theoretical interpretations are consistent with the experimental evidence that the competitive H generation is favored due to the strong CO binding energies. Our computational study paves the road to finding suitable metals that catalyze the first proton-electron transfer in the carbon dioxide reduction reaction and produce reaction intermediates with moderate binding energies, promoting a spillover to the carbon nitride support and thereby serving as bifunctional electrocatalysts. Single metal atoms supported on 2D carbon nitride are promising electrocatalysts for carbon dioxide reduction reaction and produce reaction intermediates with moderate binding energies, promoting a spillover to the carbon nitride support and thereby serving as bifunctional electrocatalysts.