Pasar al contenido principal

DESARROLLO DE DISPOSITIVOS DE COMUNICACIONES BASADOS EN FABRICACION ADITIVA Y GUIAS VACIAS INTEGRADAS EN SUSTRATO PARA FUTURAS GENERACIONES DE SISTEMAS DE SATELITES

PID2019-103982RB-C44

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 5
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Through-Wire Microstrip-to-Empty-Substrate-Integrated-Waveguide Transition at Ka-Band

  • Ballesteros, José A.
  • Belenguer, Angel
  • Fernández, Marcos D.
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The advantages of the Substrate-Integrated Waveguide (SIW) in terms of low profile, integration with Printed Circuit Board (PCB) and low cost are maintained by the Empty Substrate-Integrated Waveguide (ESIW). Moreover, as the dielectric fill is avoided, other advantages are also added: resonators with higher quality factor and lower insertion losses. Since 2014, when it was proposed, several devices for X-band to Ka-band applications have been accurately designed and manufactured. In this way, transitions are one of the most important components, as they allow the connection between the ESIW and other planar transmision lines such as microstrip. To accomplish this aim, different transitions have been proposed in the literature: based on sharp dielectric tapers combining metallized and non-metallized parts, which increases the manufacture complexity; with a broadened ESIW section, that is less complex at the cost of increasing reflection and radiation losses due to the abrupt discontinuity; based on tapered artificial dielectric slab matrix, more difficult to mechanize; using a tapered microstrip transition, with high radiation losses; and even transitions for multilayer devices. Among all the transitions, the most versatile one is the through-wire transition, as microstrip and ESIW can be implemented in different layers and allows any feeding angle between the microstrip line and the ESIW. In this paper the through-wire transition has been properly validated at Ku- and Ka-bands. Moreover, a back-to-back transition has been accurately manufactured in Ka-band with measured insertion losses lower than 3.7 dB and return losses higher that 11.7 dB, concluding that the transition is not frequency dependent., This work was supported by the Coordinated Research and Development Project PID2019-103982RB, Subprojects C44 and C41, funded by the Ministerio de Ciencia e Innovación Agencia Estatal de Investigación/10.13039/501100011033. This work was also supported under grant TED2021-129196B-C44 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Microstrip to Double Ridge Empty Substrate Integrated Waveguide Transitions Based on Exponential and Superelliptical Dielectric Taper

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Vidal Pantaleoni, Ana|||0000-0002-3853-6260
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Darío
  • Belenguer, Ángel
[EN] The Empty Substrate IntegratedWaveguides (ESIW) maintain the advantages of the Substrate Integrated waveguide (SIW) (i.e. low-volume, low profile, lightweight, easy manufacturing, and integration in a planar circuit board), and present lower losses and higher quality factors in resonators due to the propagation of the fields through air, instead of through lossy dielectric as in SIW. The operational (monomode) bandwidth of the ESIW can be increased with the Single Ridge ESIW (SRESIW). However, the bandwidth can be further increased with the Double Ridge ESIW (DRESIW). In this paper, a brief study of possible DRESIW geometries has been performed, and two transitions from microstrip line (MS) to DRESIW with a dielectric taper geometry based on different equations are proposed. The new wideband transitions present simulated return losses in back-to-back configurations greater than 20 dB in more than a 95% fractional bandwidth. The transition that presents a better compromise between return losses, bandwidth and ease of fabrication is manufactured. The measured return and insertion losses are better than 19.7 dB and 1.5 dB, respectively, in a 96.4% fractional bandwidth., This work was supported by the Ministerio de Ciencia e Innovacion, Spanish Government, under Project PID2019-103982RB-C44 and Project PID2019-103982RB-C41.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Transition from Microstrip Line to Ridge Empty Substrate Integrated Waveguide Based on the Equations of the Superellipse

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Martínez, Juan A.
  • Belenguer, Ángel
  • Nova-Giménez, Vicente
[EN] In recent years, multiple technologies have been proposed with the aim of combining the characteristics of traditional planar and non-planar transmission lines. The first and most popular of these technologies is the Substrate Integrated Waveguide (SIW), where rows of metallic vias are mechanized in a printed circuit board (PCB). These vias, together with the top and bottom metal layers of the PCB, form a channel for the propagation of the electromagnetic fields, similar to that of a rectangular waveguide, but through a dielectric body, which increases the losses. To reduce these losses, the empty substrate integrated waveguide (ESIW) was recently proposed. In the ESIW, the dielectric is removed from the substrate, and this results in better performance (low profile and easy manufacturing as in SIW, but lower losses and better quality factor for resonators). Recently, to increase the operational bandwidth (monomode propagation) of the ESIW, the ridge ESIW (RESIW) and a transition from RESIW to microstrip line was proposed. In this work, a new and improved wideband transition from microstrip line (MS) to RESIW, with a dielectric taper based on the equations of the superellipse, is proposed. The new wideband transition presents simulated return losses in a back-to-back transition greater than 20 dB in an 87% fractional bandwidth, while in the previous transition the fractional bandwidth was 82%. This is an increment of 5%. In addition, the transition presents simulated return losses greater than 26 dB in an 84% fractional bandwidth. For validation purposes, a back-to-back configuration of the new transition was successfully manufactured and measured. The measured return loss is better than 14 dB with an insertion loss lower than 1 dB over the whole band., This research was funded by Ministerio de Ciencia e Innovación, Spanish Government, under Research Projects PID2019-103982RB-C44 and PID2019-103982RB-C41.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Novel In-Line ESICL-to-ESIW Transition for High-Performance Empty Substrate Integrated Microwave Systems

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Dario
  • Belenguer, Ángel
[EN] This letter introduces a novel transition from empty substrate integrated coaxial line (ESICL) to empty substrate integrated waveguide (ESIW). Using a standard planar manufacturing process, this transition enables the development of a complete microwave system integrating various technologies. The design procedure is outlined, and two transitions from ESICL to ESIW for the Ku -and K -bands show simulated return loss better 30 dB in the entire frequency ranges. To validate feasibility, a back-to-back ESIW¿ESICL¿ESIW transition is fabricated and measured, yielding return losses higher than 19 dB and insertion losses lower than 0.45 dB., This work was supported in part by the Ministerio de Ciencia e Innovación, Spanish Government, under Research Projects PID2019-103982RB-C41 and PID2019- 103982RB-C44; and in part by MICIN/AEI/10.13039/501100011033 under Grant TED2021-129196B-C41 and Grant TED2021-129196B-C44.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Design of a Wide-Bandwidth, High-Gain and Easy-to-Manufacture 2.4 GHz Floating Patch Antenna Fed with the Through-Wire Technique

  • Fernández, Marcos D.
  • Herraiz, Dario
  • Alomainy, Akram
  • Belenger, Angel
  • David Herraiz|||0000-0002-3793-6078
[EN] This paper presents a feasibility study for designing a floating patch antenna structure fed with a probe from a microstrip. The main premise is to eliminate the dielectric in the patch design, which is equivalent to having an air dielectric and leads to the necessity of proper support to fasten the patch in the air. The novelty of this paper is that this new device, apart from being fed with the though-wire technique directly from the microstrip line, has to be, by design, robust and easy to manufacture, and, at the same time, it has to present, simultaneously, good values in all of the performance indexes. A prototype has been designed, manufactured, and measured with good performance results: a bandwidth higher than 10% around 2.4 GHz, a radiation efficiency higher than 96%, a 9.63 dBi gain, and a wide beamwidth. The main advantages of this prototype, together with its good performance indexes, include its low fabrication cost, low losses, light weight, robustness, high integration capability, the complete removal of the dielectric material, and the use of a single post for feeding the patch while simultaneously fixing its floating position., This work was supported by the Ministerio de Ciencia e Innovacion of the Spanish Government through the Subproject C44 of the Coordinated Research and Development Project PID2019-103982RB under Grant MCIN/AEI/10.13039/501100011033.