Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Innovative Integration of High-Performance Floating Patch Antennas in Empty Substrate Integrated Waveguides

  • Herraiz Tirado, Dario
  • Fernandez, Marcos D.
  • Galeote Carballo, Ignacio
  • Alomainy, Akram
  • Belenguer, Angel
  • David Herraiz|||0000-0002-3793-6078
[EN] Substrate Integrated Circuits (SICs) represent a significant advancement in microwave communication systems due to their high efficiency, performance, and integration capabilities. Empty Substrate-Integrated Waveguides (ESIWs) are a type of SIC that offers benefits such as cost-effectiveness while maintaining high performance. This paper presents the design and implementation of the first floating patch antenna integrated into an ESIW, fed by a metallic rod. The proposed antenna is designed to operate in the X-band (8-12 GHz), with a resonance peak at 10 GHz. The patch antenna is square, which provides interesting radiation characteristics. It is excited by a metallic rod that connects the patch to the ESIW line, resulting in excellent performance in terms of measured radiation efficiency (over 90%) and -10 dB impedance bandwidth (approximately 20%). The prototype demonstrates minimal differences between the simulated and manufactured versions. These results highlight the potential of ESIW-fed floating patch antennas for advanced satellite communication systems. This will enable the integration of complete communication systems within ESIWs and facilitate the straightforward development of 2D element arrays., This work was partially supported by the coordinated Research Project PID2022-136590OB, Subproject C44, funded by MICIU/AEI/10.13039/501100011033, Spanish Government, and by ERDF A way of making Europe, EU, and partially supported by the coordinated Research Project TED2021-129196B, Subproject C44, funded by MICIU/AEI/10.13039/501100011033, Spanish Government, and by the European Union NextGenerationEU/PRTR. This work was developed thanks to the European social fund ESF+.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Through-Wire Microstrip-to-Empty-Substrate-Integrated-Waveguide Transition at Ka-Band

  • Ballesteros, José A.
  • Belenguer, Angel
  • Fernández, Marcos D.
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] The advantages of the Substrate-Integrated Waveguide (SIW) in terms of low profile, integration with Printed Circuit Board (PCB) and low cost are maintained by the Empty Substrate-Integrated Waveguide (ESIW). Moreover, as the dielectric fill is avoided, other advantages are also added: resonators with higher quality factor and lower insertion losses. Since 2014, when it was proposed, several devices for X-band to Ka-band applications have been accurately designed and manufactured. In this way, transitions are one of the most important components, as they allow the connection between the ESIW and other planar transmision lines such as microstrip. To accomplish this aim, different transitions have been proposed in the literature: based on sharp dielectric tapers combining metallized and non-metallized parts, which increases the manufacture complexity; with a broadened ESIW section, that is less complex at the cost of increasing reflection and radiation losses due to the abrupt discontinuity; based on tapered artificial dielectric slab matrix, more difficult to mechanize; using a tapered microstrip transition, with high radiation losses; and even transitions for multilayer devices. Among all the transitions, the most versatile one is the through-wire transition, as microstrip and ESIW can be implemented in different layers and allows any feeding angle between the microstrip line and the ESIW. In this paper the through-wire transition has been properly validated at Ku- and Ka-bands. Moreover, a back-to-back transition has been accurately manufactured in Ka-band with measured insertion losses lower than 3.7 dB and return losses higher that 11.7 dB, concluding that the transition is not frequency dependent., This work was supported by the Coordinated Research and Development Project PID2019-103982RB, Subprojects C44 and C41, funded by the Ministerio de Ciencia e Innovación Agencia Estatal de Investigación/10.13039/501100011033. This work was also supported under grant TED2021-129196B-C44 funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Vertical and Compact ESICL-to-ESIW Transition for Multilayer Empty Substrate Integrated Circuits

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Darío
  • Belenguer, Angel
[EN] In this letter, a vertical transition from empty substrate integrated (ESI) coaxial line (ESICL) to ESI waveguide (ESIW) is presented. In contrast to in-line approaches, the proposed transition can connect both technologies with an independent substrate height, thus providing a compact structure. To transform the TEM mode into the TE10 mode, an aperture transversal to the propagation direction is used to couple the fields, and matching elements are added to improve the return loss level. A design guideline is presented and used to design two transitions. A back-to-back prototype is fabricated and measured to validate the proposed transition. The measured results show a return loss level better than 11.2 dB and an insertion loss lower than 1 dB, which makes the proposed transition promising for high-performance interconnection required in multilayer systems., This work was supported in part by MICIU/AEI/10.13039/501100011033, Spanish Government, under Project PID2022-136590OB, Project C41, and Project C44; in part by European Union Next Generation EU/PRTR under Project TED2021-129196B, Project C41, and Project C44; and in part by European Social Fund + (ESF+).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Simple and Easily Connectable Transition from Empty Substrate-IntegratedWaveguide to a 3D Printed Rectangular Waveguide

  • Herraiz, Dario
  • Belenguer, Ángel
  • Fernández, Marcos
  • Cogollos, Santiago|||0000-0002-4189-2952
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
[EN] 3D printing is one of the most promising manufacturing methods in the most developed technological fields, including microwave hardware fabrication. On the other hand, the well-known manufacturing methods of planar substrate integrated circuits allow high-quality prototypes to be made at low cost and with mass production capabilities. The combination of both manufacturing methods, 2D or 2.5D (substrate integrated circuits) and 3D (3D printed structures), will allow us to take advantage of the main strengths of each technology and minimise disadvantages. In this article, for the first time, a transition structure between the Empty Substrate-Integrated Waveguide (ESIW) technology—a planar waveguide integrated on a printed circuit board—and a standard rectangular waveguide manufactured by 3D printing is proposed. This transition will make it possible to combine planar circuits with 3D structures, thus taking advantage of the benefits of both types of technologies. The fabricated prototype presents low losses (0.6 dB for the transmission coefficient and 15 dB for reflection coefficient), good electrical response (very flat), and simultaneously good mechanical stability and robustness to manufacturing and assembly errors. The proposed design for this transition piece is easily realisable for a wide range of affordable 3D printers. Repeatability is guaranteed and the proposed transition allows us to combine different SIC structures to 3D printed circuits. Hence, this transition will enable advancements in the fabrication of microwave devices, particularly with regard to satellite communications., This research was funded by the Ministerio de Ciencia e Innovación, Spanish Government, and the European Union NextGenerationEU/PRTR, through the Subprojects C44 and C41 of the Coordinated Project TED2021-129196B, under Grant MCIN/AEI/10.13039/501100011033. This work has been financed by European Social Fund + (ESF+).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

A Novel In-Line ESICL-to-ESIW Transition for High-Performance Empty Substrate Integrated Microwave Systems

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Dario
  • Belenguer, Ángel
[EN] This letter introduces a novel transition from empty substrate integrated coaxial line (ESICL) to empty substrate integrated waveguide (ESIW). Using a standard planar manufacturing process, this transition enables the development of a complete microwave system integrating various technologies. The design procedure is outlined, and two transitions from ESICL to ESIW for the Ku -and K -bands show simulated return loss better 30 dB in the entire frequency ranges. To validate feasibility, a back-to-back ESIW¿ESICL¿ESIW transition is fabricated and measured, yielding return losses higher than 19 dB and insertion losses lower than 0.45 dB., This work was supported in part by the Ministerio de Ciencia e Innovación, Spanish Government, under Research Projects PID2019-103982RB-C41 and PID2019- 103982RB-C44; and in part by MICIN/AEI/10.13039/501100011033 under Grant TED2021-129196B-C41 and Grant TED2021-129196B-C44.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

High-Directivity and low-loss directional couplers based on Empty Substrate Integrated Coaxial Line Technology

  • David Herraiz|||0000-0002-3793-6078
  • Esteban González, Héctor|||0000-0002-5936-658X
  • Boria Esbert, Vicente Enrique|||0000-0001-7150-9785
  • Herraiz, Darío
  • de Dios, Juan J.
  • Fernández, Marcos D.
  • Belenguer, Ángel
[EN] High-directivity and low-loss directional couplers, based on Empty Substrate Integrated Coaxial Line (ESICL) technology, are presented in this article. The proposed coupled line direcional couplers, are based on combination of a high-isolation section, a tapering transition based on splines between the access lines and high-isolation sections, reduced-width coupled lines, and inclined arms. The design evolution has justified the combination and precise adjustment of these elements, proving to be a solution for enhancing directivity, reducing return losses, and attaining a more stable coupling coefficient. The use of the ESICL technology exhibits significant promise in terms of electrical performance, bandwidth, seamless integration with other planar circuits, and manufacturing simplicity. For comparison purposes, two directional couplers, with the same coupling coefficient but different operation frequencies, have been designed and manufactured. Additionally, a microstrip coupler has been designed and manufactured for comparison. The simulated and measured results clearly indicate that ESICL directional couplers outperform their microstrip counterparts in terms of losses and directivity, without the need for additional lumped elements or complex geometries., This work was supported in part by MCIN/AEI/10.13039/501100011033, Spanish Government, under the Coordinated Research Project, through Subprojects C41 and C44, under Grant PID2022-136590OB; in part by MCIN/AEI/10.13039/501100011033, Spanish Government; and in part by the European Union Next Generation European Union/Plan de Recuperación, Transformación y Resiliencia (EU/PRTR), under the Coordinated Research Project, through Subprojects C41 and C44, under Grant TED2021-129196B.