Pasar al contenido principal

DESARROLLO DE UNA PLATAFORMA ROBOTICA PARA AYUDAR A NIÑOS CON PARALISIS CEREBRAL A DESCUBRIR COMO CAMINAR

PID2019-105110RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Rediseño basado en la experiencia clínica de un andador robótico para la rehabilitación de fractura de cadera, Redesign based on clinical experience of a robotic walker for hip fracture rehabilitation

  • Costa, Vanina
  • Sánchez, Cristina
  • Perea, Luis
  • Rocon, Eduardo
  • Otero, Abraham
  • Raya, Rafael
[ES] La fractura de cadera es una lesión frecuente en personas mayores de 65 años,estando asociada a una reducción en la esperanza de vida. Su rehabilitación se basa en la movilización gradual mediante terapia manual. Sin embargo, estos tratamientos no suelen ser integrales, constan de ejercicios repetitivos, resultan monótonos para el pacientey su seguimientoes principalmente cualitativo.  SWalker es un andador robótico basado en un sistema de tracción y de soporte de peso, que integra sensores de marcha. Con una primera versión de este andador se llevó a cabo un estudio clínico que involucró 34 pacientes. A partir de esta experiencia se han extraído los requisitos de diseño que se consideran claves para el desarrollo de este tipo de dispositivos. Sobre la base de estos requisitos se ha construido una segunda versión del andador en la que se ha validado su usabilidad con 5 pacientes. Empleando la escala QUEST 2.0 se han comparado ambas versiones del andador, mostrando mejoras en la segunda versión en seguridad, adaptabilidad y usabilidad, [EN] Hip fracture is a common injury in people over 65 years old, linked to a reduction in life expectancy. Rehabilitation is based on gradual mobilization through manual therapy. However, these treatments are not usually integrative, they consist of repetitive exercises that are not motivating for the patient and their follow-up is mainly qualitative. SWalker is a robotic platform based on a traction and weight-bearing system that integrates gait sensors. A clinical study involving 34 patients was conducted with a first version of this walker. From this experience, the key design requirements for the development of this type of device were gathered. Based on these requirements, a second version of the walker was built and its usability was validated with 5 patients. Using the QUEST 2.0 scale, both versions of the walker were compared, showing improvements in safety, adaptability, and usability in the second version., Los autores agradecen al Grupo Albertia su colaboración en este proyecto y al equipo de Josman Soluciones Técnicas por su contribución en el rediseño y fabricación del dispositivo. Este trabajo fue financiado por el Centro para el Desarrollo Tecnológico Industrial (CDTI) del Ministerio de Ciencia e Innovación, Gobierno de España bajo el proyecto SWALKERS17 concedido en 2018 y el proyecto de referencia IDI-20220400 (SWALKERS II) concedido en 2021.También por el Gobierno de España (Proyectos RTI2018-097122-A-I00 y PID2019-105110RB-C31, financiados por FEDER/Ministerio de Ciencia e Innovación/AEI)
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Nuevo sistema robótico social de rehabilitación de pacientes pediátricos con parálisis cerebral, New social robotic system for the rehabilitation of pediatric patients with cerebral palsy

  • Tassinari-Lagos, Mauro
  • Romero-Sorozábal, Pablo
  • Martín, Carlos
  • Blanco, Dolores
  • Malfaz, María
  • Rocon, Eduardo
[EN] The most common motor disease in pediatric patients is cerebral palsy (CP), which affects their ability to move and maintain balance and posture. This study focuses on robotic rehabilitation therapies, carried out with the CPWalker platform, for the performance of functional exercises through precise movements. The work presented in this article proposes the integration of social assistance robotics in the CPWalker through the social robot NAO. In this way, it is proposed to reinforce patient motivation and the dynamism of these therapies, and to automate corrective feedback to the patient. Two evaluations have been carried out during this study. The first was a clinical protocol of activities and games between NAO and the patients to evaluate the acceptance of the robot by the children. Subsequently, the integration of the newly developed social robotic rehabilitation system was evaluated. The results of this study indicate that the robot is positively perceived by the patients., [ES] La parálisis cerebral (PC) es la enfermedad motora más común en pacientes pediátricos, afectando su capacidad para moverse y mantener el balance corporal y la postura. Este estudio se enfoca en las terapias de rehabilitación robóticas, llevadas a cabo con la plataforma CPWalker, para la realización de ejercicios funcionales mediante movimientos precisos. El trabajo presentado en este artículo propone la integración de la robótica de asistencia social en el CPWalker a través del robot social NAO. De esta manera se plantea conseguir reforzar la motivación del paciente y el dinamismo de estas terapias, y automatizar la retroalimentación correctiva al paciente. Se han realizado dos evaluaciones a lo largo de este estudio. La primera ha sido un protocolo clínico de actividades y juegos entre NAO y los pacientes para evaluar la aceptación del robot por parte de los niños. Y, posteriormente, se ha evaluado la integración del nuevo sistema robótico social de rehabilitación desarrollado. Los resultados de este estudio indican que el robot es percibido positivamente por los pacientes., Este trabajo fue apoyado en una parte por el Ministerio de Ciencia e Innovación de España a través del proyecto Discover2Walk bajo la subvención PID2019-105110RB-C31, y en otra parte por los Programas de Actividades I+D en la Comunidad de Madrid y Fondos Estructurales de la UE (RoboCity) bajo la Beca S2018. También, gracias a la colaboración de la Universidad Carlos III de Madrid, el Centro de Automática y Robótica (CSIC) y el Hospital Niño Jesús
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Diseño y desarrollo de una arquitectura electrónica bioinspirada para el control de sistemas de asistencia a la locomoción, Design and development of a bioinspired electronic architecture for the control of locomotion assistance systems

  • Delgado-Oleas, Gabriel
  • Romero-Sorozabal, Pablo
  • Lora-Millan, Julio
  • Gutierrez, Alvaro
  • Rocon, Eduardo
[EN] This article presents the design and development of a bio-inspired electronic architecture based on the human motor system for locomotion assistance systems, as in the case of assistive or rehabilitation exoskeletons. The proposed architecture is divided into three hierarchical levels and implemented in ROS2, facilitating modularity and parallelism in the execution and operation of the system. The proposal has been implemented in an exoskeleton prototype called Discover2Walk. The results show that the proposal can be applied to both exoskeleton applications for rehabilitation and assistance. This architecture offers greater modularity, improved compatibility with programming languages, scalability, interoperability with other robotics and automation systems, support for distributed applications, and ease of monitoring and control. The presented control architecture may be adopted in future robotic platforms and exoskeletons, improving motor control of gait and offering more personalized therapies., [ES] Este artículo presenta el diseño y desarrollo de una arquitectura electrónica bioinspirada en el sistema motor humano para sistemas de asistencia a la locomoción, como es en el caso de exoesqueletos de asistencia o de rehabilitación. La arquitectura propuesta se divide en tres niveles jerárquicos y se implementa en ROS2, facilitando la modularidad y el paralelismo en la ejecución y funcionamiento del sistema. La propuesta ha sido implementada en un prototipo de exoesqueleto denominado Discover2Walk. Los resultados obtenidos muestran que la propuesta puede aplicarse a ambos tipos de aplicación de exoesqueletos, tanto para rehabilitación como para asistencia. Entre las ventajas que ofrece esta arquitectura, destacan una mayor modularidad, la mejora de la compatibilidad con lenguajes de programación, la escalabilidad, la interoperabilidad con otros sistemas de robótica y automatización, el soporte para aplicaciones distribuidas y la facilidad de supervisión y control. La arquitectura de control que se presenta puede llegar a ser adoptada en futuras plataformas robóticas y exoesqueletos, mejorando el control motor de la marcha y ofreciendo terapias más personalizadas., Este trabajo ha sido realizado en el marco del proyecto Discover2Walk “Desarrollo de una plataforma robótica para ayudar a niños con Parálisis Cerebral a descubrir cómo caminar”, referencia PID2019-105110RB-C31, financiado por el Ministerio de Ciencia e Innovación.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An IMUs-Based Extended Kalman Filter to Estimate Gait Lower Limb Sagittal Kinematics for the Control of Wearable Robotic Devices

  • Lora-Millán, Julio S.
  • Hidalgo, Andrés F.
  • Rocón, Eduardo
This work involved human subjects or animals in its research. Approval of all ethical and experimental procedures and protocols was granted by the Local Ethics Committee (CSIC's Ethics Committee) under Approval No. 034/2020, and performed in line with the Declaration of Helsinki., Inertial sensors have gained relevance as wearable sensors to acquire the kinematics of human limbs through fusion sensor algorithms and biomechanical models. However, there are some limitations to the use of Inertial Measurement Units in the control of wearable robotic devices: 1) Some approaches use magnetometer readings to estimate the orientation of the sensor, and, as a result, they are prone to errors due to electromagnetic interferences; 2) Biomechanical model-based approaches require complex and timeconsuming calibration procedures. In order to address these issues, this paper proposes an Extended Kalman Filter to estimate sagittal lower limb kinematics during gait, based on gyroscopes and accelerometers and without requiring any calibration or sensor alignment process. As magnetometer measurements are not involved, this method is not affected by electromagnetic disturbances. Our approach calculates the knee rotation axis in real-time, and it estimates hip and ankle sagittal axes considering that the movements in that plane occur around parallel axes. We carried out an experimental validation with eight healthy subjects walking on a treadmill at different velocities. We obtained waveform RMS errors about 3.8 , 3.6 , and 4.8 for hip, knee, and ankle in the sagittal plane. We also assessed the performance of this method as a tool for controlling lower-limb robotic exoskeletons by detecting gait events or estimating the phase and frequency of the gait in real-time through an Adaptive Frequency Oscillator. The average RMS delay in the detection of gait events was lower than 60 ms, and the RMSE in the estimation of the gait phase was about 3% of the gait cycle.We conclude that the described method could be used as a controller for wearable robotic devices., This work was supported in part by the Spanish Ministry of Science and Innovation through the Project Discover2Walk under Grant PID2019-105110RB-C31, and in part by the Programas de Actividades ICD en la Comunidad de Madrid and Structural Funds of the EU (RoboCity) under Grant S2018/NMT-4331. The work of Julio S. Lora-Millan was supported by the Ministry of Universities of the Government of Spain through the Training Program for Academic Staff Fellowship under Grant FPU16/01313., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development and Evaluation of BenchBalance: A System for Benchmarking Balance Capabilities of Wearable Robots and Their Users

  • Bayón, Cristina
  • Delgado-Oleas, Gabriel
  • Avellar, Leticia
  • Bentivoglio, Francesca
  • Di Tommaso, Francesco
  • Tagliamonte, Nevio L.
  • Rocón, Eduardo
  • Asseldonk, Edwin H. F. van
Recent advances in the control of overground exoskeletons are being centered on improving balance support and decreasing the reliance on crutches. However, appropriate methods to quantify the stability of these exoskeletons (and their users) are still under development. A reliable and reproducible balance assessment is critical to enrich exoskeletons’ performance and their interaction with humans. In this work, we present the BenchBalance system, which is a benchmarking solution to conduct reproducible balance assessments of exoskeletons and their users. Integrating two key elements, i.e., a hand-held perturbator and a smart garment, BenchBalance is a portable and low-cost system that provides a quantitative assessment related to the reaction and capacity of wearable exoskeletons and their users to respond to controlled external perturbations. A software interface is used to guide the experimenter throughout a predefined protocol of measurable perturbations, taking into account antero-posterior and mediolateral responses. In total, the protocol is composed of sixteen perturbation conditions, which vary in magnitude and location while still controlling their orientation. The data acquired by the interface are classified and saved for a subsequent analysis based on synthetic metrics. In this paper, we present a proof of principle of the BenchBalance system with a healthy user in two scenarios: subject not wearing and subject wearing the H2 lower-limb exoskeleton. After a brief training period, the experimenter was able to provide the manual perturbations of the protocol in a consistent and reproducible way. The balance metrics defined within the BenchBalance framework were able to detect differences in performance depending on the perturbation magnitude, location, and the presence or not of the exoskeleton. The BenchBalance system will be integrated at EUROBENCH facilities to benchmark the balance capabilities of wearable exoskeletons and their users., This research was funded by the European project EUROBENCH2020 (eurobench2020.eu), grant number n779963, BenchBalance. This work benefited from work/discussions in the COST Action Wearable Robots CA16116, and the project Discover2Walk under Grant PID2019-105110RB-C31 by the Spanish Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Coordination Between Partial Robotic Exoskeletons and Human Gait: A Comprehensive Review on Control Strategies

  • Lora-Millan, J.S.
  • Moreno, Juan Camilo
  • Rocón, Eduardo
Lower-limb robotic exoskeletons have become powerful tools to assist or rehabilitate the gait of subjects with impaired walking, even when they are designed to act only partially over the locomotor system, as in the case of unilateral or single-joint exoskeletons. These partial exoskeletons require a proper method to synchronize their assistive actions and ensure correct inter-joint coordination with the user’s gait. This review analyzes the state of the art of control strategies to coordinate the assistance provided by these partial devices with the actual gait of the wearers. We have analyzed and classified the different approaches independently of the hardware implementation, describing their basis and principles. We have also reviewed the experimental validations of these devices for impaired and unimpaired walking subjects to provide the reader with a clear view of their technology readiness level. Eventually, the current state of the art and necessary future steps in the field are summarized and discussed., This research was funded by the Spanish Ministry of Science and Innovation, project Discover2Walk (PID 2019-105110RB-C31). JL-M received a Training Program for Academic Staff fellowship (FPU16/01313) from the Ministry of Universities of the Government of Spain. JM was supported by grant RTI 2018-097290-B-C32 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A unilateral robotic knee exoskeleton to assess the role of natural gait assistance in hemiparetic patients

  • Lora-Millan, J.S.
  • Sánchez-Cuesta, Francisco José
  • Romero, Juan Pablo
  • Moreno, Juan Camilo
  • Rocón, Eduardo
Background: Hemiparetic gait is characterized by strong asymmetries that can severely affect the quality of life of stroke survivors. This type of asymmetry is due to motor deficits in the paretic leg and the resulting compensations in the nonparetic limb. In this study, we aimed to evaluate the effect of actively promoting gait symmetry in hemiparetic patients by assessing the behavior of both paretic and nonparetic lower limbs. This paper introduces the design and validation of the REFLEX prototype, a unilateral active knee–ankle–foot orthosis designed and developed to naturally assist the paretic limbs of hemiparetic patients during gait. Methods: REFLEX uses an adaptive frequency oscillator to estimate the continuous gait phase of the nonparetic limb. Based on this estimation, the device synchronically assists the paretic leg following two different control strategies: (1) replicating the movement of the nonparetic leg or (2) inducing a healthy gait pattern for the paretic leg. Technical validation of the system was implemented on three healthy subjects, while the effect of the generated assistance was assessed in three stroke patients. The effects of this assistance were evaluated in terms of interlimb symmetry with respect to spatiotemporal gait parameters such as step length or time, as well as the similarity between the joint’s motion in both legs. Results: Preliminary results proved the feasibility of the REFLEX prototype to assist gait by reinforcing symmetry. They also pointed out that the assistance of the paretic leg resulted in a decrease in the compensatory strategies developed by the nonparetic limb to achieve a functional gait. Notably, better results were attained when the assistance was provided according to a standard healthy pattern, which initially might suppose a lower symmetry but enabled a healthier evolution of the motion of the nonparetic limb. Conclusions: This work presents the preliminary validation of the REFLEX prototype, a unilateral knee exoskeleton for gait assistance in hemiparetic patients. The experimental results indicate that assisting the paretic leg of a hemiparetic patient based on the movement of their nonparetic leg is a valuable strategy for reducing the compensatory mechanisms developed by the nonparetic limb., This research was funded by the Spanish Ministry of Science and Innovation, project Discover2Walk (PID2019-105110RB-C31), and the Programas de Actividades I+D en la Comunidad de Madrid and Structural Funds of the EU (Robocity, S2018/NMT-4331). J.S. L-M. received a Training Program for Academic Staff fellowship (FPU16/01313) from the Ministry of Universities of the Government of Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A unilateral robotic knee exoskeleton to assess the role of natural gait assistance in hemiparetic patients

  • Lora-Millan, J.S.
  • Sánchez-Cuesta, Francisco José
  • Romero, Juan Pablo
  • Moreno, Juan Camilo
  • Rocón, Eduardo
Background: Hemiparetic gait is characterized by strong asymmetries that can severely affect the quality of life of stroke survivors. This type of asymmetry is due to motor deficits in the paretic leg and the resulting compensations in the nonparetic limb. In this study, we aimed to evaluate the effect of actively promoting gait symmetry in hemiparetic patients by assessing the behavior of both paretic and nonparetic lower limbs. This paper introduces the design and validation of the REFLEX prototype, a unilateral active knee–ankle–foot orthosis designed and developed to naturally assist the paretic limbs of hemiparetic patients during gait. Methods: REFLEX uses an adaptive frequency oscillator to estimate the continuous gait phase of the nonparetic limb. Based on this estimation, the device synchronically assists the paretic leg following two different control strategies: (1) replicating the movement of the nonparetic leg or (2) inducing a healthy gait pattern for the paretic leg. Technical validation of the system was implemented on three healthy subjects, while the effect of the generated assistance was assessed in three stroke patients. The effects of this assistance were evaluated in terms of interlimb symmetry with respect to spatiotemporal gait parameters such as step length or time, as well as the similarity between the joint’s motion in both legs. Results: Preliminary results proved the feasibility of the REFLEX prototype to assist gait by reinforcing symmetry. They also pointed out that the assistance of the paretic leg resulted in a decrease in the compensatory strategies developed by the nonparetic limb to achieve a functional gait. Notably, better results were attained when the assistance was provided according to a standard healthy pattern, which initially might suppose a lower symmetry but enabled a healthier evolution of the motion of the nonparetic limb. Conclusions: This work presents the preliminary validation of the REFLEX prototype, a unilateral knee exoskeleton for gait assistance in hemiparetic patients. The experimental results indicate that assisting the paretic leg of a hemiparetic patient based on the movement of their nonparetic leg is a valuable strategy for reducing the compensatory mechanisms developed by the nonparetic limb., This research was funded by the Spanish Ministry of Science and Innovation, project Discover2Walk (PID2019-105110RB-C31), and the Programas de Actividades I+D en la Comunidad de Madrid and Structural Funds of the EU (Robocity, S2018/NMT-4331). J.S. L-M. received a Training Program for Academic Staff fellowship (FPU16/01313) from the Ministry of Universities of the Government of Spain.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Robotic exoskeleton embodiment in post-stroke hemiparetic patients: an experimental study about the integration of the assistance provided by the REFLEX knee exoskeleton

  • Lora-Millan, J.S.
  • Sánchez-Cuesta, Francisco José
  • Romero, Juan Pablo
  • Moreno, J.C.
  • Rocón, Eduardo
Hemiparetic gait is the most common motor-disorder after stroke and, in spite of rehabilitation efforts, it is persistent in 50% of community dwelling stroke-survivors. Robotic exoskeletons have been proposed as assistive devices to support impaired joints. An example of these devices is the REFLEX knee exoskeleton, which assists the gait of hemiparetic subjects and whose action seems to be properly embodied by stroke survivors, who were able to adapt the motion of their non-assisted limbs and, therefore, reduce their compensation mechanisms. This paper presents an experimental validation carried out to deepen into the effects of REFLEX¿s assistance in hemiparetic subjects. Special attention was paid to the effect produced in the muscular activity as a metric to evaluate the embodiment of this technology. Significant differences were obtained at the subject level due to the assistance; however, the high dispersion of the measured outcomes avoided extracting global effects at the group level. These results highlight the need of individually tailoring the action of the robot to the individual needs of each patient to maximize the beneficial outcomes. Extra research effort should be done to elucidate the neural mechanisms involved in the embodiment of external devices by stroke survivors., This research was funded by the Spanish Ministry of Science and Innovation, project Discover2Walk (PID2019‑105110RB‑C31). It also was supported by Grant PID2021-123657OB-C32 funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Novel Methods for Personalized Gait Assistance: Three-Dimensional Trajectory Prediction Based on Regression and LSTM Models

  • Romero, Juan Pablo
  • Delgado-Oleas, Gabriel
  • Laudanski, Annemarie F.
  • Gutiérrez, Álvaro
  • Rocón, Eduardo
Enhancing human–robot interaction has been a primary focus in robotic gait assistance, with a thorough understanding of human motion being crucial for personalizing gait assistance. Traditional gait trajectory references from Clinical Gait Analysis (CGA) face limitations due to their inability to account for individual variability. Recent advancements in gait pattern generators, integrating regression models and Artificial Neural Network (ANN) techniques, have aimed at providing more personalized and dynamically adaptable solutions. This article introduces a novel approach that expands regression and ANN applications beyond mere angular estimations to include three-dimensional spatial predictions. Unlike previous methods, our approach provides comprehensive spatial trajectories for hip, knee and ankle tailored to individual kinematics, significantly enhancing end-effector rehabilitation robotic devices. Our models achieve state-of-the-art accuracy: overall RMSE of 13.40 mm and a correlation coefficient of 0.92 for the regression model, and RMSE of 12.57 mm and a correlation of 0.99 for the Long Short-Term Memory (LSTM) model. These advancements underscore the potential of these models to offer more personalized gait trajectory assistance, improving human–robot interactions, This work was carried out within the framework of the Discover2Walk project “Development of a robotic platform to help children with Cerebral Palsy discover how to walk”, reference PID2019-105110RB-C31, and the STRIDE project “VALIDACION TECNICA Y ECONOMICA DE LA PLATAFORMA ROBOTICA DISCOVER2WALK PARA EL ENTORNO CLINICO”, reference PDC2022-133898-C31, funded by the Spanish Ministry of Science and Innovation. PRZ received a Training Program fellowship, PRE2020-092049, from the Spanish Ministry of Science and Innovation, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bioinspired Hierarchical Electronic Architecture for Robotic Locomotion Assistance: Application in Exoskeletons

  • Delgado-Oleas, Gabriel
  • Romero-Sorozabal, Pablo
  • Lora-Millan, Julio
  • Gutierrez, Alvaro
  • Rocón, Eduardo
is paper presents the conceptualization, design and development of a bioinspired electronic architecture based on the human motor system for the control of mobility assistance systems, such as assistance or rehabilitation exoskeletons. The proposed architecture is divided into three hierarchical levels: perception-intention, pattern generator, and execution, facilitating modularity, scalability, and parallelism in the execution and operation of the system. ROS2 was chosen as the middleware for communication management due to its ability to handle a large amount of data, robustness, and scalability. For validation in a real world scenario, the proposal was implemented in the gait rehabilitation robotic platform Discover2Walk. Among the advantages offered by this architecture, we highlight greater modularity, improved compatibility with programming languages, and scalability, in addition to ease of supervision and control. The architecture presented can be adopted in future robotic platforms and exoskeletons with built-in interoperability., This work was carried out within the framework of the Discover2Walk project "Development of a robotic platform to help children with Cerebral Palsy discover how to walk", reference PID2019-105110RB-C31, funded by the Ministry of Science and Innovation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reorganization of resting-state eeg functional connectivity patterns in children with cerebral palsy following a motor imagery virtual-reality intervention

  • Filho, Carlos Alberto Stefano
  • Serrano, José Ignacio
  • Attux, Romis
  • Castellano, Gabriela
  • Rocón, Eduardo
  • Castillo-Sobrino, M. Dolores del
Motor imagery (MI) has been suggested to provide additional benefits when included in traditional approaches of physical therapy for children with cerebral palsy (CP). Regardless, little is understood about the underlying neurological substrates that might justify its supposed benefits. In this work, we studied resting-state (RS) electroencephalography (EEG) recordings of five children with CP that underwent a MI virtual-reality (VR) intervention. Our aim was to explore functional connectivity (FC) patterns alterations following this intervention through the formalism of graph theory, performing both group and subject-specific analyses. We found that FC patterns were more consistent across subjects prior to the MI-VR intervention, shifting along the anterior-posterior axis, post-intervention, for the b and g bands. Additionally, group FC patterns were not found for the a range. Furthermore, intra-subject analyses reinforced the existence of large inter-subject variability and the need for a careful exploration of individual pattern alterations. Such patterns also hinted at a dependency between short-term functional plasticity mechanisms and the EEG frequency bands. Although our sample size is small, we provide a longitudinal analysis framework that can be replicated in future studies, especially at the group level, and whose foundation can be easily extended to verify the validity of our hypotheses, This research was funded by the São Paulo Research Foundation (FAPESP) grants number 2019/18409-9, 2016/22116-9 and 2013/18556-9; the Brazilian’s National Council for Scientific and Technological Development (CNPq) grants 308811/2019-4 and 142229/2016-4; the Programas de Actividades I+D en la Comunidad de Madrid and Structural Funds of the EU (S2018/NMT-4331); and the Spanish Ministry of Science and Innovation, project Discover2Walk (PID2019-105110RB-C31). The APC was funded by Discover2Walk., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Cable-Driven Exoskeleton for Ankle Rehabilitation in Children with Cerebral Palsy

  • Dellibarda Varela, Iñaki
  • Romero-Sorozabal, Pablo
  • Delgado-Oleas, Gabriel
  • Muñoz, Jorge
  • Gutiérrez, Álvaro
  • Rocón, Eduardo
Cerebral palsy is the leading cause of motor disability in early childhood, with no curative treatment currently available. To mitigate its effects and promote motor rehabilitation, robotic-assisted therapies have emerged as a complement to conventional physiotherapy. In particular, cable-driven exoskeletons offer notable advantages, providing patients with additional mobility and interaction with their environment while preserving motion assistance. Within this context, the Discover2Walk project introduces a modular cable-driven robotic platform designed for early-stage gait rehabilitation. This article presents a novel ankle control module capable of actuating 3 degrees of freedom: 2 translational (in the x and z directions) and 1 rotational (dorsiflexion/plantarflexion). Experimental results confirm the technical feasibility of the approach and its effectiveness in guiding motion within the targeted degrees of freedom., This research was funded by the Spanish Ministry of Science and Innovation, project Discover2Walk (PID2019-105110RB-C31). P.R-S. received a training program fellowship (PRE2020-092049) from the Ministry of Science and Innovation. J.M.Y. has received funding from the Juan de la Cierva program, with reference number FJC2021-046692-I, granted by the Ministry of Science and Innovation. I.D.V. has received funding from the CSIC JAE program and from Google.org through a grant awarded to Fundación General CSIC. Google.org had no role in the design, execution, analysis, reporting of this research, or in decisions related to publication or presentation., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

AI-enabled photonic smart garment for movement analysis

  • Avellar, Leticia M.
  • Stefano Filho, Carlos
  • Delgado-Oleas, Gabriel
  • Frizera Neto, Anselmo
  • Rocón, Eduardo
  • Leal-Junior, Arnaldo
Smart textiles are novel solutions for remote healthcare monitoring which involve non-invasive sensors-integrated clothing. Polymer optical fiber (POF) sensors have attractive features for smart textile technology, and combined with Artificial Intelligence (AI) algorithms increase the potential of intelligent decision-making. This paper presents the development of a fully portable photonic smart garment with 30 multiplexed POF sensors combined with AI algorithms to evaluate the system ability on the activity classification of multiple subjects. Six daily activities are evaluated: standing, sitting, squatting, up-and-down arms, walking and running. A k-nearest neighbors classifier is employed and results from 10 trials of all volunteers presented an accuracy of 94.00 (0.14)%. To achieve an optimal amount of sensors, the principal component analysis is used for one volunteer and results showed an accuracy of 98.14 (0.31)% using 10 sensors, 1.82% lower than using 30 sensors. Cadence and breathing rate were estimated and compared to the data from an inertial measurement unit located on the garment back and the highest error was 2.22%. Shoulder flexion/extension was also evaluated. The proposed approach presented feasibility for activity recognition and movement-related parameters extraction, leading to a system fully optimized, including the number of sensors and wireless communication, for Healthcare 4.0., This research is financed by FAPES (84336650 and 320/2020), CNPq (304049/2019-0), Petrobras (2017/00702-6) and BenchBalance European Union (EU) Project (EU-H2020-779963-FSTP1-BenchBalance). This work was partially supported in part by the Spanish Ministry of Science and Innovation through the Project Discover2Walk under Grant PID2019-105110RB-C31, and Structural Funds of the EU (RoboCity) under Grant S2018/NMT-4331., Peer reviewed