Pasar al contenido principal

ABORDANDO LAS LIMITACIONES DE MATERIALES MAGNETOCALORICOS PARA SU IMPLEMENTACION EN APLICACIONES ENERGETICAMENTE EFICIENTES

PID2019-105720RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 21
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large thermal conductivity and robust mechanical properties of Ni-Mn-Ga/Cu magnetocaloric composites prepared by spark plasma sintering

  • Zhang, Y.
  • Gao, Y.
  • Franco, V.
  • Yin, H.
  • Peng, H. X.
  • Qin, F.
Magnetic refrigeration technology based on the magnetocaloric effect can better meet the requirements of efficient energy consumption and conversion. From engineering perspective, preparing magnetocaloric composites is an effective and efficient approach to combine desirable magnetocaloric performance, large thermal conductivity and ameliorated mechanical properties. In the present work, Ni-Mn-Ga/Cu magnetocaloric composites were prepared by spark plasma sintering (SPS) and compared with their counterparts fabricated via conventional methods. Magnetic properties were studied in detail and the magnetocaloric effect of Ni-Mn-Ga/Cu composites was characterized to be better than that of their hot-pressed counterparts and that of many micro/nano-sized Ni-Mn-Ga alloys. Besides, the composites exhibited favorable thermal conductivity of 11.2 W mK−1. The Hassel-man-Johnson model was adopted and modified to relate the thermal conductivity to the microstructure of the composites. Compared with arc-melted alloys, these SPS magnetocaloric composites sintered at different temperatures exhibited largely enhanced mechanical performance with minimum fracture stress of 340 MPa and strain of 4%. Furthermore, the failure mechanism of Ni-Mn-Ga/Cu magnetocaloric composite was elucidated by finite element simulation based on an extended linear Drucker-Prager model. The above findings from both experiments and simulation advance the knowledge of magnetocaloric materials and promote the development of magnetic refrigeration technology towards practical applications.[Figure not available: see fulltext.], This work was supported by the National Key Research and Development Program of China (2021YFB3501504 and 2021YFE0100500), Zhejiang Provincial Key Research and Development Program (2021C01004), and Zhejiang Natural Science Foundation (ZJNSF,LR20E010001). Franco V acknowledges the funding from AEI (PID2019-105720RB-I00/AEI/10.13039/501100011033) and Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (P18-RT746). Dr. Xia Y from Zhejiang University is greatly thanked for fruitful discussion and valuable help with paper writing., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Excellent cryogenic magnetocaloric properties in heavy rare-earth based HRENiGa2 (HRE = Dy, Ho, or Er) compounds

  • Guo, D.
  • Moreno-Ramírez, Luis M.
  • Law, Jia Yan
  • Zhang, Y.
  • Franco, V.
RENiX2 compounds, where RE = rare-earth element and X = p-block element, have been highly regarded for cryogenic magnetocaloric applications. Depending on the elements, they can crystallize in CeNiSi2-type, NdNiGa2-type, or MgCuAl2-type crystal structures, showing different types of magnetic ordering and thus affect their magnetic properties. Regarding the magnetocaloric effect, MgCuAl2-type aluminides show larger values than those of the CeNiSi2-type silicides and the NdNiGa2-type gallides due to the favored ferromagnetic ground state. However, RENiGa2 gallides can crystallize in either NdNiGa2- or MgCuAl2-type structures depending on the RE element. In this work, we select heavy RE (HRE) elements for exploring the microstructure, magnetic ordering and magnetocaloric performance of HRENiGa2 (HRE = Dy, Ho or Er) gallides. They all crystallize in the desired MgCuAl2-type crystal structure which undergoes a second-order transition from ferro- to para-magnetic state with increasing temperature. The maximum isothermal entropy change (∣∆Sisomax∣) values are 6.2, 10.4, and 11.4 J kg−1 K−1 (0–5 T) for DyNiGa2, HoNiGa2, and ErNiGa2, respectively, which are comparable to many recently reported cryogenic magnetocaloric materials. Particularly, the excellent magnetocaloric properties of HoNiGa2 and ErNiGa2 compounds, including their composite, fall in the temperature range that enables them for the in-demand hydrogen liquefaction systems., This work was supported by the National Natural Science Foundation of China (52071197), the Science and Technology Commission of Shanghai Municipality (19ZR1418300 and 19DZ2270200), the Independent Research and Development Project of State Key Laboratory of Advanced Special Steel, Shanghai Key Laboratory of Advanced Ferrometallurgy, Shanghai University (SKLASS 2021-Z05), Grant PID2019- 105720RB-I00 funded by MCIN/AEI/10.13039/501100011033, US/JUNTA/FEDER-UE (US-1260179), and Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (P18-RT-746). Guo D would like to acknowledge the support provided by China Scholarship Council (CSC) of the Ministry of Education, China (202006890050). Moreno-Ramírez LM acknowledges a postdoctoral fellowship from Junta de Andalucía and European Social Fund (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Current perspective in magnetocaloric materials research

  • Law, Jia Yan
  • Moreno-Ramírez, Luis M.
  • Díaz-García, A.
  • Franco, V.
Magnetocaloric refrigeration has remained a promising alternative to conventional refrigeration for the last few decades. The delay in reaching the market is significantly based on materials' related issues, such as hysteresis/reversibility, mechanical stability, or formability. This perspective paper shows the current trends in magnetocaloric materials research, highlighting the families of alloys and compounds that are gaining attention in the recent years. It also includes an overview of novel approaches that can be used to analyze these properties that could improve the applicability of magnetocaloric materials., This work was supported by Grant PID2019-105720RB-I00 funded by MCIN/AEI/10.13039/501100011033, Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (Grant No. P18-RT-746), and U.S. Air Force Office of Scientific Research (No. FA8655-21-1-7044). J.Y.L. acknowledges an EMERGIA Fellowship from Junta de Andalucía., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using a computationally driven screening to enhance magnetocaloric effect of metal monoborides

  • Romero-Muñiz, Carlos
  • Law, Jian Yan
  • Moreno-Ramírez, Luis M.
  • Díaz-García, A.
  • Franco, V.
In most cases, substitution studies that aim to optimize magnetic properties are performed at the magnetic atomic site. However, in the case of MnB, magnetic substitutions at the Mn site significantly decrease the once promising magnetocaloric and magnetic properties. This study employs computationally directed search to optimize the magnetocaloric properties of MnB where partial substitutions of boron atoms (Mn50B50−x Si x and Mn50B50−x Ge x where x = 3.125, 6.25, and 12.5) reveal new compounds with a greater magnetocaloric effect than pure MnB at the same Curie temperature. These new compounds were obtained by arc melting the pure elements and further characterized. The computationally driven screening process is based on density functional theory calculations that do not require large databases of known compounds. This work demonstrates that using simple computational screening procedures to search for new magnetocaloric materials with improved properties can be done quickly, cost-effectively, and while maintaining reliability., Work funded by PID2019-105720RB-I00/AEI/10.13039/501100011033. Additional funding from Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (Grant P18-RT-746), Air Force Office of Scientific Research (FA8655-21-1-7044) and the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant No. 101101461), is also acknowledged. C R-M acknowledges financial support by the Ramón y Cajal program of the Spanish Ministry of Science and Innovation (Ref. RYC2021-031176-I). J Y L acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Ultra-low hysteresis in giant magnetocaloric Mn1-xVxFe0.95(P,Si,B) compounds

  • Lai, J.
  • You, X.
  • Law, J.Y.
  • Franco, V.
  • Huang, B.
  • Bessas, D.
  • Maschek, M.
  • Zeng, D.
  • van Dijk, N.
  • Brück, E.
Large thermal hysteresis in the (Mn,Fe)2(P,Si) system hinders an efficient heat exchange and thus limits the magnetocaloric applications. Substitution of manganese by vanadium in the Mn1-x1Vx1Fe0.95P0.593Si0.33B0.077 and Mn1-x2Vx2Fe0.95P0.563Si0.36B0.077 compounds enable a significant reduction in the thermal hysteresis without losing the giant magnetocaloric effect. For the composition closest to the critical one, where first-order crossovers to second-order phase transition in the series of x2 = 0.02, Mn0.98V0.02Fe0.95P0.563Si0.36B0.077 exhibits a thermal hysteresis that is reduced from 1.5 to 0.5 K by 67%, yielding an adiabatic temperature change of 2.3 K and magnetic entropy change of 5.6 J/kgK for an applied field of 1 T, which demonstrates its potential for highly efficient magnetic heat pumps utilizing low-cost permanent magnets., The authors acknowledge Anton Lefering, Kees Goubitz, L. Zhang, and Bert Zwart for their technical assistance. The authors also thank Yibole for fruitful discussions. This work is financially supported by the Dutch Science Foundation NWO under applied sciences project 14013. This work is also supported by Dutch Science Foundation NWO and Technology Program (Grant No. 2015A050502015), the Guangzhou Municipal Science and Technology Program (No. 201505041702137), Natural Science Foundation of the Guangdong Province (2016A030313494), and Zhongshan Municipal Science and Technology Program (Platform construction and innovation team). The author thanks for the financial support of the Guangzhou Ethics Project. V.F. and J.Y.L. acknowledge the financial support of AEI/ FEDER-UE (grant PID2019-105720RB-I00). M.M. acknowledges financial support from EIT Climate KIC project “Local, magnetocaloric power conversion opportunities for Cities” (ID 210045), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

All-d-metal Ni(Co)-Mn(X)-Ti (X = Fe or Cr) Heusler alloys: Enhanced magnetocaloric effect for moderate magnetic fields

  • Khan, Aun N.
  • Moreno-Ramírez, Luis M.
  • Díaz-García, A.
  • Law, Jia Yan
  • Franco, V.
All-d-metal Ni(Co)-Mn-Ti Heusler alloys show high magnetocaloric/barocaloric effects ascribed to the occurrence of a martensitic transformation together with excellent mechanical properties. However, high magnetic fields are needed to fully drive the transformation and to obtain their maximum responses. To further tune the martensitic transition and the associated magnetocaloric response, we systematically investigate the role of partial Mn substitution by Fe or Cr on the parent composition Ni36Co14Mn35Ti15. On the one hand, Cr doping increases the entropy change of the transformation but causes a tighter overlap of both martensitic and Curie transitions. This significantly reduces the magnetization difference between austenite and martensite and, consequently, strongly decreases the magnetocaloric response. On the other hand, Fe doping reduces the entropy change of the transformation and separates both martensitic and Curie transitions while keeping the magnetization difference among both phases. These two combined features reduce the magnetic field needed to completely drive the martensitic transformation and leads to higher and broader isothermal entropy change peaks for moderate magnetic field changes, reaching up to 25% enhancement for 2 T when compared to the undoped alloy., Work supported by Grant PID2019-105720RB-I00 funded by MCIN/AEI/10.13039/501100011033, Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía (grant P18-RT-746), US Air Force Office of Scientific Research (FA8655-21-1-7044) and Sevilla University under VI PPIT-US program. ANK acknowledges a FPI fellowship from the Spanish MCIN/AEI. LMMR acknowledges a postdoctoral fellowship from Junta de Andalucía and European Social Fund (ESF)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

First-order phase transition in high-performance La(Fe,Mn,Si)13H despite negligible hysteresis

  • Moreno-Ramírez, Luis M.
  • Law, Jia Yan
  • Borrego, J. M.
  • Barcza, A.
  • Greneche, J.M.
  • Franco, V.
Optimizing the performance of magnetocaloric materials is facilitated by understanding the thermomagnetic transitions they undergo, including the order of these transitions and their strength. Those exhibiting strong first-order phase transitions (FOPT) are accompanied by large heating and cooling responses but with relatively small cyclic responses, while materials with second-order (SOPT) character exhibit moderate heating and cooling responses. However, the lack of hysteresis could partially compensate for the lower magnitudes with a more cyclic response. One way to effectively maximize the cyclic response, combining the advantages of FOPT and SOPT, is to fine tune the transition towards the borderline of FOPT-SOPT, which can minimize hysteresis. For the well-known La(Fe,Si)13 family, it is challenging to identify and/or evaluate the critical point where FOPT crossovers to SOPT based on conventional techniques. To address these ambiguities, in this work, we apply the field dependence exponent n criteria to a series of lowly hysteretic and high-performance La(Fe,Mn,Si)13H magnetocaloric materials with compositions close to the critical one. Even if the sample with the lowest hysteresis resembles characteristics of SOPT, it is evidently identified as undergoing FOPT from the n criteria: (1) existence of n > 2 overshoot and (2) n at the transition temperature, ntransition, is 0.37. This proximity to the critical composition (ntransition=0.4) further explains the low hysteresis observed. This FOPT character of the series is confirmed by temperature-dependent 57Fe Mössbauer spectrometry studies, fitting the hyperfine field to the Bean-Rodbell model instead of the usual Brillouin function. As it is a zero-field method, the confirmation by Mössbauer spectrometry gives further strength to the n-criterion., Work supported by Grant funded by PID2019-105720RB-I00/AEI/10.13039/501100011033, Consejería de Economía, Conocimiento,Empresas y Universidad de la Junta de Andalucía (grant P18-RT-746), and Air Force Office of Scientific Research (FA8655-21-1-7044). JYL acknowledges EMERGIA Fellowship from Junta de Andalucía (EMC21_00418)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Polymer-based filaments with embedded magnetocaloric Ni-Mn-Ga Heusler alloy particles for additive manufacturing

  • Díaz-García, Álvaro
  • Law, Jia Yan
  • Zrodowski, L.
  • Moronczyk, B.
  • Wróblewski, Rafal.
  • Franco, V.
One important issue associated to magnetocaloric materials that hinders its technological application is the poor processability and structural integrity of those with the highest performance, usually intermetallics undergoing first-order magnetic phase transitions. Additionally, the performance of these magnetocaloric materials highly depends on the structural stability of the magnetocaloric phase, which is, in many cases, very sensitive to temperature and mechanical processes. Additive manufacturing via the extrusion of polymer-based composites is regarded as a promising way to overcome these issues. A recently presented manufacturing method of encapsulating functional fillers into polymer capsules has been used to produce a composite filament with a large load of magnetocaloric off-stoichiometric NiMnGa Heusler alloy fillers with a uniform distribution throughout the polymer matrix as demonstrated by x-ray tomography characterization. The incorporation of these metallic particles causes changes in the thermal behavior of the polymer as well as an increase in the flowability of the composite with respect to the polymer at the same temperature. The increased flowability of the composites found during manufacturing can be compensated by lowering the extrusion temperatures, making this technique even more convenient for preserving the filler properties, which is an important concern when additive manufacturing magnetocaloric materials. This is confirmed by the magnetic and magnetocaloric behavior of the composites, with responses proportional to the fraction of fillers. Highlights: Ultrasonic-atomization produces highly spherical Ni-Mn-Ga Heusler alloy particles. Ni-Mn-Ga filled polymer capsules allow a direct extrusion of composites for AM. X-ray tomography shows uniform volumetric filler distribution within the filaments. Decreased viscosity of the matrix favors the lowering of the processing temperature. The low processing temperatures avoid altering the MCE of the alloy fillers., Work funded by PID2019-105720RB-I00/AEI/10.13039/501100011033, Air Force Office of Scientific Research (FA8655-21-1-7044), and the Clean Hydrogen Partnership and its members within the project HyLICAL (grant no. 101101461). JYL acknowledges EMERGIA Fellowship from Junta de Andalucía (EMC21_00418). Atomization device was funded by POB “Technologie Materiałowe” of Warsaw University of Technology within the Excellence Initiative: Research University (IDUB) Programme., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Competitive driving effect on calorics by dual-fields in ferroic materials with strong magnetostructural coupling

  • Hao, Jia Zheng
  • Wang, Bing jie
  • Hu, Feng Xia
  • Wang, Jing
  • Wang, Jian Tao
  • Zhou, Hou Bo
  • Shen, Fei Ran
  • Liang, Fei Xiang
  • Yu, Zi Bing
  • Gao, Yi Hong
  • Law, Jia Yan
  • Franco, V.
  • He, Lun Hua
  • He, Jun
  • Liu, Dan
  • Sun, JiRong
  • Shen, BaoGen
Solid state refrigeration based on caloric effect of a solid has received extensive attention. From theoretical viewpoint, the caloric effect driven by multiple fields yields larger caloric response due to cross-interaction for ferroic materials with multiple order parameters. However, experimental evidence involving cross-responses is very limited. Here, we report the first experimental study on the modulation of the barocaloric effect (BCE) by magnetic field in Ni50Mn35In15 materials with strong magnetostructural coupling. The results demonstrate that the modulating behavior of BCE by magnetic field, which is dominated by cross-response, depends crucially on the magnitude of pressure. At low pressures, an abnormal minimum appears in the magnetic field dependent barocaloric entropy change |ΔSTBCE|, while it turns into a monotonic enhancement as the pressure reaches 4 kbar or larger. The enhanced ratio of |ΔSTBCE| is as much as ∼ 40 % when a magnetic field of 5 T is applied, accordingly the barocaloric refrigeration performance enhances. For the underlying mechanism, Ab initio calculations were performed, which provide a theoretical explanation about the driving effect by single pressure, single magnetic field, and dual-fields on the magnetostructural transition from the perspective of total energy and Mn-d/Ni-d electronic hybridization. The present work reveals that the modulation of BCE by magnetic field is not independent or additive but a synergistic effect of dual-fields, which lays a solid basis in guiding dual-fields driven solid-state refrigeration applications., This work was supported by the National Key R&D Program of China (Grant Nos. 2021YFB3501202, 2019YFA0704900, 2020YFA0711500, 2023YFA1406003), the National Natural Sciences Foundation of China (Grant Nos. 52088101, 92263202, U23A20550, 51971240, 52101228), and the Strategic Priority Research Program B (XDB33030200) the key programs of Chinese Academy of Sciences. V.F. and J.Y.L. acknowledge the support of AEI/FEDER-UE (PID2019-105720RB-I00/AEI/10.13039/501100011033) and the support of Chinese Academy of Sciences President's International Fellowship Initiative (PIFI) for visiting scientists (Grant No. 2024VMA0021, 2024VMC0006)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reconstruction of thermomagnetic and phase transformation loops in magnetostructural transitions using selective integration of temperature first-order reversal curves (TFORC) distributions

  • Díaz-García, Álvaro
  • Moreno-Ramírez, Luis M.
  • Law, Jian Yan
  • Albertini, F.
  • Fabbrici, S.
  • Franco, V.
The temperature variant of the first-order reversal curves (TFORC) analysis technique is emerging as a useful tool for the study of the thermal hysteresis in magnetocaloric alloys undergoing first-order phase transitions. This work demonstrates the capabilities of the TFORC technique for reconstructing and deconvoluting the reversible and irreversible components of thermomagnetic transitions through the integration of the TFORC distributions. Through numerical simulations, the influence of applying smoothing protocols, the presence of noise in the magnetization curves or the distance between the hysteretic first-order phase transition and the Curie transitions of the phases have been tested. By employing the appropriate integration protocol of TFORC distributions, the transformed phase fraction can be separated from the total thermomagnetic behavior. The results obtained from the numeric simulations have been confirmed by applying the proposed analysis methods to the experimental TFORC results of a Ni-Mn-In Heusler alloy sample undergoing magnetic first-order phase transition. In this way, the TFORC technique can be stablished as a valuable characterization method for magnetostructural phase transition materials., Work funded by PID2019-105720RB-I00/AEI/10.13039/501100011033, the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant no. 101101461), Air Force Office of Scientific Research (FA8655-21-1-7044) and PNRR MUR project ECS_00000033_ECOSISTER. J.Y.L. acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (ref. EMC21_00418)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetostructural transformation and magnetocaloric response in Mn(Fe)NiSi(Al) alloys

  • Khan, Aun N.
  • Moreno-Ramírez, Luis M.
  • Law, Jia Yan
  • Franco, V.
An efficient magnetocaloric refrigerant must have certain characteristics such as a sharp transition near the desired working temperature, a large cyclic magnetocaloric response, and the use of raw materials with reduced costs and low environmental consequences. In this sense, this work focuses on a series of rare-earth- and Co-free Mn0.5Fe0.5NiSi1-xAlx alloys (x = 0.0525, 0.060, 0.0685) with promising magnetocaloric properties. The alloys were synthesized using combined arc melting and induction melting techniques, as this synthesis route provides improved control on the sample composition and homogeneity. We investigated how the heat treatment temperature and Al content affect the magnetostructural and magnetocaloric properties of the alloys. On the one hand, it is found that annealing at 1173 K for 7 days leads to a sharp magnetostructural transformation with no traces of impurities for the alloy with x = 0.0525. Under these conditions, a large isothermal entropy change of –11.5 J kg−1 K−1 for 1 T is obtained near room temperature, significantly improving the value of the as-cast sample. On the other hand, following this optimal heat treatment, the influence of Al content is studied: upon increasing the Al concentration the magnetostructural transformation shifts to lower temperatures, ranging from 320 K for x = 0.0525 to 220 K for x = 0.0685 (measured upon heating)., Work supported by Grants PID2019-105720RB-I00 and PID2023-146047OBI00 funded by MCIN/AEI/ 10.13039/501100011033, US Air Force Office of Scientific Research (FA8655-21-1-7044), the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant No. 101101461), the European Innovation Council, funded by the European Union, via project CoCoMag (Grant no. 101099736), and the Research Council of Norway within project LIQUID-H. J.Y.L acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418). ANK acknowledges a FPI fellowship from the Spanish MCIN/AEI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Perspectives and Energy Applications of Magnetocaloric, Pyromagnetic, Electrocaloric, and Pyroelectric Materials

  • Klinar, Katja
  • Law, Jia Yan
  • Franco, V.
  • Moya, Xavier
  • Kitanovski, Andrej
This perspective provides an overview of the state of research and innovation in the areas of magnetocaloric and pyromagnetic materials, and electrocaloric and pyroelectric materials, including the overlapping sub-areas of multicaloric and multipyro materials that can operate simultaneously under the application of magnetic and electric fields. These materials are critically examined for their potential to revolutionize cooling, heating, and energy-harvesting applications. This perspective first summarizes the state-of-the-art advancements and highlights recent significant developments. Then, it is identified and discussed that the prevailing challenges hindering the widespread adoption of technologies based on these materials. In this context, after consulting with members of the caloric and pyro communities, a technology roadmap is outlined to guide research efforts in overcoming current barriers to applications, with the goal of achieving impactful results by 2040. This roadmap emphasizes the importance of focusing on under-researched materials, novel devices, and application spaces, paving the way for interdisciplinary efforts that can lead to significant reductions in carbon dioxide emissions., A.K. and K.K. acknowledge the support of the Slovenian Research and Innovation Agency for the project TCCbuilder, an open-source simulation tool for thermal control circuits J7-3148, and research core funding no. P2-0223. V.F. and J.Y.L. acknowledge funding from PID2019-105720RB-I00/AEI/10.13039/501100011033; the Air Force Office of Scientific Research (FA8655-21-1-7044); the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant No. 101101461); the European Innovation Council, funded by the European Union, through project CoCoMag (Grant No. 101099736); and the Research Council of Norway within project LIQUID-H.J.Y.L. acknowledges an EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418). X.M. acknowledges funding from the UK EPSRC (Grant No. EP/M003752/1), the ERC Starting Grant (Grant No. 680032), and the Royal Society., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stress-relieved Fe-Mn-Ni-Ge-Si high-entropy alloys: A path for enhancing the magnetocaloric response

  • Díaz García, Álvaro
  • Law, Jia Yan
  • Moreno-Ramírez, Luis M.
  • Franco, V.
In this study, we further subject the recently found Fe-Mn-Ni-Ge-Si high-entropy alloys (HEAs) exhibiting first-order thermomagnetic phase transition to designed heat treatments. The results reveal that the standard heat treatments transform the as-cast dual-phase microstructure into a single phase without influencing the magnetocaloric response or average composition. A crucial observation is the substantial enhancement in magnetocaloric effects and transition temperatures achieved through a low-temperature heat treatment at 673 K, while maintaining the microstructures and compositions of the alloys. The optimized annealed Fe-Mn-Ni-Ge-Si HEA samples show exceptional magnetocaloric effects, surpassing previous studies and positioning them as strong contenders against established conventional high-performing magnetocaloric materials. The changes in magnetic anisotropy distribution are indicative of the stress relaxation induced by low-temperature annealing. This work shows that stress relaxation can have a significant effect on the optimization of magnetocaloric response, even more important than achieving a single phase by annealing at higher temperatures., The work was supported by grants PID2019-105720RB-I00 and PID2023-146047OB- from AEI/10.13039/501100011033, US Air Force Office of Scientific Research (project FA8655-21-1-7044), and the European Innovation Council, funded by the European Union, through project CoCoMag (Grant No. 101099736). JYL acknowledges EMERGIA fellowship (Ref. EMC21_00418) from Junta de Andalucía., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

High-Throughput Screening of High-Performance Magnetocaloric Materials by Gradient Additive Manufacturing

  • Xie, Longlong
  • Liang, Chenguang
  • Qin, Yazhou
  • Zhou, He
  • Yu, Ziyuan
  • Chen, Haodong
  • Naeem, Muhammad Zeeshan
  • Qiao, Kaiming
  • Wen, Yaojie
  • Zhang, Baicheng
  • Wang, Gaofeng
  • Li, Xiao
  • Liu, Jian
  • Franco, V.
  • Chu, Ke
  • Yi, Min
  • Zhang, Hu
Magnetic refrigeration based on magnetocaloric effect (MCE) has become a promising cooling technology to replace the traditional vapor compression refrigeration. However, traditional methods for searching MCE materials require producing many different compositions, causing unbearable workload and long experimental periods. Here, 3D printed La0.7Ce0.3Fe11.65Si1.35–Fe compositionally gradient alloys (CGAs) are successfully prepared using laser powder bed fusion equipped with a powder hopper with dual-bin structure. This CGAs accelerate the high-throughput screening for the best composition of La(Fe, Si)13/Fe with both high MCE and mechanical properties. The good interfacial compatibility between brittle 1:13 phase and reinforcing α-Fe improves the mechanical properties significantly. Even after hydrogenation, the compressive strength and ultimate strain of the La(Fe, Si)13/Fe hydrides are ≈220% and ≈150% higher than those of stoichiometric La(Fe, Si)13. Meanwhile, the hydrogenated composite exhibits a large MCE under low magnetic field, e.g., the magnetic entropy change |ΔSM|max of 7.6 J kg−1 K−1 under 2 T is 52% higher than that of the benchmark Gd (5.0 J kg−1 K−1). Furthermore, this La(Fe, Si)13/Fe is 3D printed into various complex shapes suitable for heat exchangers. This study provides an innovative strategy for high-throughput screening of new materials., L.X. and C.L. contributed equally to this work. H. Zhang acknowledges the support from the National Key Research and Development Program of China (Grant No. 2021YFB3501204), the National Natural Science Foundation of China (Grant No. 52171169), and the State Key Laboratory for Advanced Metals and Materials (Grant No.: 2023-ZD01). K. Qiao acknowledges the support from the National Natural Science Foundation of China (Grant No. 52101210). K. Chu thanks the support from the National Natural Science Foundation of China (Grant No. 52161025). M. Yi acknowledges the support from the National Key Research and Development Program of China (2022YFB4600700), the National Natural Science Foundation of China (12272173, 11902150), the National Youth Talents Program of China, and a project Funded by the Priority Academic Program Development of Jiangsu Higher Education Institutions. This work is partially supported by the High Performance Computing Platform of Nanjing University of Aeronautics and Astronautics, China. V. Franco acknowledges the support of PID2019-105720RB-I00/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large low-field-driven electrocaloric effect in organic-inorganic hybrid TMCM-CdCl3

  • Lin, Yuan
  • Chai, Congcong
  • Liu, Zhijie
  • Wang, Jing
  • Jin, Shifeng
  • Yang, Yurong
  • Gao, Yihong
  • Hao, Munan
  • Li, Xinyue
  • Hou, Yuxuan
  • Ma, Xingyue
  • Wang, Bingjie
  • Wang, Zheng
  • Kan, Yue
  • Zheng, Jie
  • Bai, Yang
  • Chen, Yunzhong
  • Sun, Jirong
  • Zhao, Tongyun
  • Law, Jia Yan
  • Franco, V.
  • Hu, Fengxia
  • Shen, Baogen
Chemicals and CAS Registry Numbers cadmium chloride 10108-64-2, Due to environmental-friendliness and high-efficiency, electrocaloric effect (ECE) is widely regarded as a refrigeration technology for tomorrow. Herein, utilizing organic-inorganic hybridization strategy, we achieve the largest low-field-driven ECE and highest directly-measured electrocaloric strength (ECS) via packing sphere-like organic cation (CH3)3NCH2Cl+ (TMCM+) into inorganic one-dimension (1-D) CdCl3 chain framework. Single-crystal X-ray (SC-XRD) diffraction combined with Raman Spectra reveals that the simultaneous order-disorder transition of organic cations and dramatic structure change of inorganic framework are responsible for the large ECE. Moreover, the measured P-E loops and density function theory (DFT) calculations convey that the distinctive electric-field-induced metastable phase and consequential two-step meta-electric transition could lower the transition energy barrier and account for the low driving field. This work shows that the low-symmetry interaction between inorganic framework and organic cations plays a key role in achieving large ECE under low-field, which provides a method for designing high-performance electrocaloric materials via organic-inorganic hybridization., This work was supported by the National Key Research and Development Program of China (Grant Nos. 2020YFA0711500 (J.W. and Y.Y.), 2023YFA1406003 (F.H.), 2021YFB3501202 (F.H.)), the National Natural Sciences Foundation of China (Grant Nos. 52088101 (B.S.), 92263202 (F.H.), U23A20550 (F.H.), 22361132534 (J.W. and F.H.)), and the Strategic Priority Research Program (B) of the Chinese Academy of Sciences (XDB33030200 (B.S. and F.H.)). A portion of this work was carried out at the Synergetic Extreme Condition User Facility (SECUF). J.Y.L. and V.F. acknowledge the support of AEI/FEDER-UE (grants PID2019-105720RB-I00 (J.Y.L. and V.F.) and PID2023-146047OB-I00 (J.Y.L. and V.F.) from AEI/10.13039/501100011033), and of the Chinese Academy of Sciences President’s International Fellowship Initiative (PIFI) for visiting scientists (Grants No. 2024VMC0006 (J.Y.L.), 2024VMA0021 (V.F.)). J.Y.L. acknowledges an EMERGIA 2021 Fellowship (EMC21_00418 (J.Y.L.)) from Junta de Andalucía., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant room-temperature magnetocaloric effect MM′X alloys explored by machine learning

  • Qiao, Kaiming
  • Cui, Zhe
  • Hao, Xiaowen
  • Zhao, Qian
  • Xu, Yuanxiang
  • Wang, Dekun
  • Liu, Jingyi
  • Wang, Doudou
  • Xia, Yuanguang
  • Yin, Wen
  • Hao, Jia Zheng
  • He, Lunhua
  • Romero-Muñiz, Carlos
  • Law, Jia Yan
  • Franco, V.
  • Ren, Qingyong
  • Zhang, Hu
Magnetic refrigeration is emerging as a promising alternative to conventional gas compression refrigeration. The key to advancing this technology lies in identifying materials with high magnetocaloric effect (MCE). However, traditional experimental methods require time-consuming and labor-intensive experimentation to screen compositions. Herein, we developed a machine learning (ML) model utilizing the Random Forest algorithm to efficiently identify MM'X alloy compositions with giant MCE near room temperature based on a small dataset (<200). The ML-predicted results were perfectly confirmed by the validation experiments. Notably, while most typical magnetic refrigeration materials near room temperature show a maximum ∆S around or <20 kg<sup>-1</sup> K<sup>-1</sup>(0–5 T), our predicted alloys show a remarkable ∆S of up to 51 kg<sup>-1</sup> K<sup>-1</sup>, which is more than four times higher than that of the benchmark material, Gd. The origin of this giant MCE is linked to atomic disorder and lattice ∆S predominantly from Ni atoms, as confirmed through spherical aberration corrected transmission electron microscopy, neutron powder diffraction and element-resolved vibrational density of states analysis. This work accelerates the discovery of magnetic refrigerants and significantly promotes the development of magnetic refrigeration., This work was supported by the National Key Research and Development Program of China (Grant No.: 2021YFB3501204); the National Natural Science Foundation of China (Grant Nos.: 52171169, 52101210, 52161025, 52101236, 52401252, and 12474024); the State Key Laboratory for Advanced Metals and Materials (Grant No.: 2023-ZD01); Fundamental Research Funds for the Central Universities (Grant No.: FRF-TP-24–004A); USTB Research Center for International People-to-people Exchange in Science, Technology and Civilization (Grant No.: 2024KFZD001). Z.C., C.R.M. J.Y.L and V.F. acknowledge funding from AEI (PID2019–105720RB-I00/AEI/10.13039/501100011033 and PID2023–146047OB-I00/AEI/10.13039/50110001103). J.Y.L. acknowledges an EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418). C.R.M. acknowledges a Ramón y Cajal fellowship of the Spanish Ministry of Science and Innovation (ref. RYC2021–031176-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic reversibility accompanied by thermal hysteresis in magnetocaloric materials: A lock-in thermography study

  • Revuelta-Losada, Jorge
  • Khan, Aun N.
  • Moreno-Ramírez, Luis M.
  • Law, Jia Yan
  • Giri, Anit K.
  • Franco, V.
Lock-in infrared thermography (LIT) was used to obtain the reversible adiabatic temperature change ( ) from an oscillating magnetic field up to a maximum of 1.5 T. Several paradigmatic magnetocaloric materials exhibiting diverse thermomagnetic phase transitions were studied: (1) Gd, undergoing a second-order transition; (2) LaFe11.38Mn0.28Si1.34-H undergoing a magneto-elastic first-order transition; and (3) Ni48.6Mn35.9In15.5 and (4) Ni36Co14Mn35Ti15 Heusler alloys, both undergoing magneto-structural first-order transition with varying degrees of overlap with the second-order transition of austenite and associated hysteresis. LIT increases resolution by two orders of magnitude compared to traditional thermography. This advanced capability facilitates the detection of features in the responses that would otherwise be challenging to identify. Furthermore, the phase with respect to the excitation serves as an indicator of the phase transition dynamics. Importantly, while the measurements remain reversible against field oscillations, first-order thermomagnetic phase transitions driven by non-saturating fields show different behaviors for heating and cooling curves, manifesting thermal hysteresis and the irreversibility of the transition under those conditions. This highlights the significance of direct characterization methods of the magnetocaloric response over indirect approaches and its usefulness for the design of materials for efficient refrigeration devices., Work funded by AEI/10.13039/501100011033 (projects PID2019-105720RB-I00 and PID2023-146047OB-I00), US Air Force Office of Scientific Research and US Army Research Laboratory (grant FA8655-21-1-7044), DEVCOM Army Research Laboratory, USA, grant (W911NF-19-2-0212), the European Innovation Council, funded by the European Union, via project Magccine (Grant agreement 101161135), the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant No. 101101461), project PPIT2024-31833, co-financed by EU, Ministerio de Hacienda y Función Pública, FEDER and Junta de Andalucía, and VII Plan Propio de Investigación from University of Seville. J.Y.L acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418). ANK acknowledges a FPI fellowship from the Spanish MCIN/AEI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative determination of the order phase transitions of multicaloric materials: The validity of n-overshoot

  • Reis, Mario
  • Law, Jia Yan
  • Franco, V.
Caloric materials have a significant response (adiabatic temperature change or isothermal entropy change) in the vicinity of a phase transition, with the magnitude and characteristics of this response being strongly dependent on the nature of the transition. It is therefore important to be able to quantitatively ascertain the order of the transition (first or second order) to predict if the phase transformation implies a significant hysteresis, which is detrimental from the application point of view. In the case of magnetocalorics, the overshoot above two of the exponent n, describing the field dependence of the isothermal entropy change, has been demonstrated to be a suitable fingerprint of first order phase transitions. In this work, we demonstrate that the criterion holds for multicaloric materials in which the magnetocaloric transformation is altered by pressure., J.Y.L. and V.F. acknowledge grants PID2019-105720RB-I00 and PID2023-146047OB-I00 funded by AEI/10.13039/501100011033, Spain; the Air Force Office of Scientific Research, United States (FA8655-21-1-7044); and project PPIT2024-31833 co-financed by EU, Ministerio de Hacienda Función Pública, Spain, FEDER, Spain and Junta de Andalucía. J.Y.L. acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (ref. EMC21_00418). M.S.R. thanks FAPERJ and CNPq., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compositionally complex alloying in multiple-R-Co2 laves phase system: Lattice distortion and static and dynamic magnetocaloric properties

  • Tian, Zhengying
  • Law, Jia Yan
  • Moreno-Ramírez, Luis M.
  • Liu, Yao
  • Hu, Fengxia
  • Gamzatov, Adler G.
  • Aliev, Akhmed
  • Kadirbardeev, Anvar
  • Wang, Jing
  • Zhai, Wei
  • Wei, Bingbo
  • Franco, V.
  • Shen, Baogen
Compositionally complex (CC) alloying strategies can improve performance under operational conditions as demonstrated by the advancements of high-entropy alloys but their effect on the thermomagnetic functionality remains unclear. The findings of this work reveal the CC effects on thermomagnetic functionality by systematically investigating CC alloying at the rare-earth (R) site of the RCo2 system, particularly focusing on both static and dynamic magnetocaloric effects. By combining Tb, Dy, Ho, Er and Gd elements in near-equiatomic proportions (which increases the configurational entropy of mixing), significant isothermal entropy changes, akin to those observed in the well-known DyCo2, are found across a broad temperature span, indicating the potential for multi-stage coupling applications. Exponent n analysis indicates the series is near the critical composition, enabling substantial responses without thermal hysteresis. Direct measurements of the adiabatic temperature change of Dy0.25Tb0.25Ho0.25Er0.25Co2 show that CC alloying at the R-site does not decrease cyclic performance at frequencies below 5 Hz in alternating magnetic fields with respect to DyCo2. High-resolution electron micrographs and variable temperature X-ray diffraction results reveal a 39.5 % increase in lattice distortion compared to DyCo2, raising the phase transition energy barrier from 0.28 to 0.47 eV. These findings shed insights into the dynamic thermomagnetic responses and underscore the potential of CC alloying to improve the magnetocaloric effects of RCo2 family., This work was supported by the Science Center of the National Science Foundation of China (52088101), the National Key R&D Program of China (2023YFA1406003, 2020YFA0711500, 2021YFB3501202), the National Natural Science Foundation of China (U23A20550, 92263202, 22361132534) and the Strategic Priority Research Program B (XDB1270201) and the key programs of Chinese Academy of Sciences. The study was also supported by the Russian Science Foundation, Grant No. 24–43–00156, and the NSFC, Grant No.2231101520. JYL, LMMR and VF acknowledge Grants PID2019–105720RB-I00 and PID2023–146047OB-I00 funded by MCIN/AEI/ 10.13039/501100011033, the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant No. 101101461), the Research Council of Norway within the project LIQUID-H, project PPIT2024–31833, co-financed by EU, Ministerio de Hacienda y Función Pública, FEDER, and Junta de Andalucía, and VII Plan Propio de Investigación from University of Seville. JYL and VF acknowledge the support of Chinese Academy of Sciences President’s International Fellowship Initiative (PIFI) for visiting scientists (Grant No. 2024VMA0021, 2024VMC0006). JYL acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetocaloric materials for hydrogen liquefaction

  • Romero-Muñiz, Carlos
  • Law, Jia Yan
  • Revuelta-Losada, Jorge
  • Moreno-Ramírez, Luis M.
  • Franco, V.
The expected energy transition to hydrogen gas as a greener energy vector has revived the interest in magnetic refrigeration at the cryogenic range, specifically between 20 and 80 K, with the vision to develop a new generation of hydrogen gas liquefiers. From the materials science point of view, the search for magnetocaloric materials containing mainly non-critical elements with a significant response in that temperature range, together with good cyclability and stability, is a challenging task. Given the increasing interest of the research community on this topic, we aim to establish a comprehensive catalog of the magnetocaloric compounds characterized so far, to be used as a starting point for further research. For this purpose, a systematic outlook of the state of the art is presented here, with the analysis and classification of more than 400 cryogenic magnetocaloric materials, divided into five large families according to their physicochemical properties. Moreover, we provide detailed information about their magnetocaloric properties, magnetic behavior, and transition characteristics together with criticality, which will facilitate the future search for optimal compounds., Work funded by PID2019-105720RB-I00/AEI/10.13039/501100011033, Air Force Office of Scientific Research (FA8655-21-1-7044), the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant No. 101101461), the European Innovation Council, funded by the European Union, via project CoCoMag (Grant no. 101099736), and the Research Council of Norway within project LIQUID-H. C. R.-M. acknowledges financial support by the Ramón y Cajal program of the Spanish Ministry of Science and Innovation (Ref. RYC2021-031176-I). J.Y.L acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced local homogeneity obtained by induction melting for optimizing reversible magnetocaloric response in all-d-metal Ni(Co)-Mn-Ti Heusler alloys

  • Khan, Aun N.
  • Moreno-Ramírez, Luis M.
  • Garcia-Garcia, F. Javier
  • Varela, María
  • Revuelta-Losada, Jorge
  • Law, Jia Yan
  • Franco, V.
All-d-metal Ni(Co)-Mn-Ti Heusler alloys showing giant magnetocaloric properties at near room temperature are highly desirable for solid-state cooling applications. However, when exploring the literature, the reported magnetocaloric properties vary widely, hinting at the importance of the synthesis route. In this work, we select the Ni36Co14Mn35Ti15 composition, and systematically explore different synthesis routes such as arc melting, suction casting and induction melting, to investigate their effect on the magnetostructural transition and magnetocaloric properties. Among the studied samples, the induction melted sample shows the most abrupt martensitic transformation and the lowest thermal hysteresis: 4 K versus 8 K for arc melted and 17 K for suction casted. This abruptness leads to a remarkable isothermal entropy change of 23 J kg− 1 K− 1 for 1.5 T, along with the largest reversible response to date of 29 J kg− 1 K− 1 for 5 T, as compared to the reported magnetocaloric materials undergoing magnetostructural transition. The quantitative analysis of the elemental maps for the studied alloy series reveals that the larger homogeneity in the Ti distribution achieved by induction melting, when compared to the arc melted and suction casted counterparts, should be responsible for the sharpness of phase transformation and the low thermal hysteresis observed., Work supported by Projects PID2019-105720RB-I00, PID2021-1229890OB-C51, and PID2023-146047OB-I00 funded by MCIN/AEI/10.13039/501100011033, US Air Force Office of Scientific Research (FA8655-21-1-7044), the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant no. 101101461), the Research Council of Norway within project LIQUID-H, the European Innovation Council, funded by the European Union, via project CoCoMag (Grant no. 101099736), project PPIT2024-31833, co-financed by EU, Ministerio de Hacienda y Función Pública, FEDER and Junta de Andalucía, and Sevilla University under VII PPIT-US program. JYL acknowledges an Emergia Fellowship from Junta de Andalucía (Ref. EMC21_00418). ANK acknowledges a FPI fellowship from the Spanish MCIN/AEI., Peer reviewed