Pasar al contenido principal

CONVERSION DE ENERGIA MAGNETOTERMICA EN MULTIPLES RANGOS DE TEMPERATURA: DESDE EL ENFRIAMIENTO A LA RECUPERACION

PID2023-146047OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetostructural transformation and magnetocaloric response in Mn(Fe)NiSi(Al) alloys

  • Khan, Aun N.
  • Moreno-Ramírez, Luis M.
  • Law, Jia Yan
  • Franco, V.
An efficient magnetocaloric refrigerant must have certain characteristics such as a sharp transition near the desired working temperature, a large cyclic magnetocaloric response, and the use of raw materials with reduced costs and low environmental consequences. In this sense, this work focuses on a series of rare-earth- and Co-free Mn0.5Fe0.5NiSi1-xAlx alloys (x = 0.0525, 0.060, 0.0685) with promising magnetocaloric properties. The alloys were synthesized using combined arc melting and induction melting techniques, as this synthesis route provides improved control on the sample composition and homogeneity. We investigated how the heat treatment temperature and Al content affect the magnetostructural and magnetocaloric properties of the alloys. On the one hand, it is found that annealing at 1173 K for 7 days leads to a sharp magnetostructural transformation with no traces of impurities for the alloy with x = 0.0525. Under these conditions, a large isothermal entropy change of –11.5 J kg−1 K−1 for 1 T is obtained near room temperature, significantly improving the value of the as-cast sample. On the other hand, following this optimal heat treatment, the influence of Al content is studied: upon increasing the Al concentration the magnetostructural transformation shifts to lower temperatures, ranging from 320 K for x = 0.0525 to 220 K for x = 0.0685 (measured upon heating)., Work supported by Grants PID2019-105720RB-I00 and PID2023-146047OBI00 funded by MCIN/AEI/ 10.13039/501100011033, US Air Force Office of Scientific Research (FA8655-21-1-7044), the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant No. 101101461), the European Innovation Council, funded by the European Union, via project CoCoMag (Grant no. 101099736), and the Research Council of Norway within project LIQUID-H. J.Y.L acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418). ANK acknowledges a FPI fellowship from the Spanish MCIN/AEI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Stress-relieved Fe-Mn-Ni-Ge-Si high-entropy alloys: A path for enhancing the magnetocaloric response

  • Díaz García, Álvaro
  • Law, Jia Yan
  • Moreno-Ramírez, Luis M.
  • Franco, V.
In this study, we further subject the recently found Fe-Mn-Ni-Ge-Si high-entropy alloys (HEAs) exhibiting first-order thermomagnetic phase transition to designed heat treatments. The results reveal that the standard heat treatments transform the as-cast dual-phase microstructure into a single phase without influencing the magnetocaloric response or average composition. A crucial observation is the substantial enhancement in magnetocaloric effects and transition temperatures achieved through a low-temperature heat treatment at 673 K, while maintaining the microstructures and compositions of the alloys. The optimized annealed Fe-Mn-Ni-Ge-Si HEA samples show exceptional magnetocaloric effects, surpassing previous studies and positioning them as strong contenders against established conventional high-performing magnetocaloric materials. The changes in magnetic anisotropy distribution are indicative of the stress relaxation induced by low-temperature annealing. This work shows that stress relaxation can have a significant effect on the optimization of magnetocaloric response, even more important than achieving a single phase by annealing at higher temperatures., The work was supported by grants PID2019-105720RB-I00 and PID2023-146047OB- from AEI/10.13039/501100011033, US Air Force Office of Scientific Research (project FA8655-21-1-7044), and the European Innovation Council, funded by the European Union, through project CoCoMag (Grant No. 101099736). JYL acknowledges EMERGIA fellowship (Ref. EMC21_00418) from Junta de Andalucía., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Thermomagnetic liquid metal switches with fast bidirectional response

  • Chen, Haodong
  • Xie, Yuyu
  • Qiao, Kaiming
  • Xie, Longlong
  • Yu, Ziyuan
  • Xu, Chenyu
  • Liu, Jingyi
  • Liu, Mingze
  • Lu, Yongyu
  • Liu, Jing
  • Hu, Fengxia
  • Shen, Baogen
  • Chu, Ke
  • Law, Jia Yan
  • Franco, V.
  • Zhang, Hu
Traditional thermal switches usually suffer from long-time and unidirectional response. Herein, we combined liquid metals with magnetic Ni2Mn1.4In0.6 particles and developed a thermomagnetic liquid metal. These materials not only show excellent fluidity and electrical conductivity, but also exhibit fast response at a tuneable temperature that traditional magnetic liquid metals do not have. The ultimate application is designed as micro-channel thermal switch. Particularly, our thermal switch features bidirectional response through the droplet displacement, thus simultaneously cutting off the working circuit while turning on the fire extinguishing. Its response time of 1.2 s is 3.3 - 5.6 times faster than typical commercial thermal switches under the same hot source temperature of 75 °C, and it can be further reduced to 660 ms under the optimal environment. Moreover, this fast-response thermal switch offers the fastest recovery time, low cost, and long-cycle stability, showing a huge potential as a generation of thermal switches for diverse applications., This work was partially supported by the National Natural Science Foundation of China 52171169 to H.Z., the National Key Research and Development Program of China 2021YFB3501204 to H.Z., the State Key Laboratory for Advanced Metals and Materials 2023-ZD01 to H.Z., the National Natural Science Foundation of China 52101210 to K.M.Q., the National Natural Science Foundation of China 52161025 to K.C., the Regional Government of Andalucia, Emergia Fellowship EMC21_00418 to J.L., the Chinese Academy of Sciences President’s International Fellowship 2024VMC0006 to J.L., the Chinese Academy of Sciences President’s International Fellowship 2024VMA0021 to V.F., AEI/10.13039/501100011033 grant PID2023-146047OB-I00 to V.F. and J.L, FEDER and Junta de Andalucía PPIT2024-31833 to V.F., the National Natural Science Foundation of China 52088101 to B.G.S., and the National Natural Science Foundation of China 92263202 to F.X.H., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Large low-field-driven electrocaloric effect in organic-inorganic hybrid TMCM-CdCl3

  • Lin, Yuan
  • Chai, Congcong
  • Liu, Zhijie
  • Wang, Jing
  • Jin, Shifeng
  • Yang, Yurong
  • Gao, Yihong
  • Hao, Munan
  • Li, Xinyue
  • Hou, Yuxuan
  • Ma, Xingyue
  • Wang, Bingjie
  • Wang, Zheng
  • Kan, Yue
  • Zheng, Jie
  • Bai, Yang
  • Chen, Yunzhong
  • Sun, Jirong
  • Zhao, Tongyun
  • Law, Jia Yan
  • Franco, V.
  • Hu, Fengxia
  • Shen, Baogen
Chemicals and CAS Registry Numbers cadmium chloride 10108-64-2, Due to environmental-friendliness and high-efficiency, electrocaloric effect (ECE) is widely regarded as a refrigeration technology for tomorrow. Herein, utilizing organic-inorganic hybridization strategy, we achieve the largest low-field-driven ECE and highest directly-measured electrocaloric strength (ECS) via packing sphere-like organic cation (CH3)3NCH2Cl+ (TMCM+) into inorganic one-dimension (1-D) CdCl3 chain framework. Single-crystal X-ray (SC-XRD) diffraction combined with Raman Spectra reveals that the simultaneous order-disorder transition of organic cations and dramatic structure change of inorganic framework are responsible for the large ECE. Moreover, the measured P-E loops and density function theory (DFT) calculations convey that the distinctive electric-field-induced metastable phase and consequential two-step meta-electric transition could lower the transition energy barrier and account for the low driving field. This work shows that the low-symmetry interaction between inorganic framework and organic cations plays a key role in achieving large ECE under low-field, which provides a method for designing high-performance electrocaloric materials via organic-inorganic hybridization., This work was supported by the National Key Research and Development Program of China (Grant Nos. 2020YFA0711500 (J.W. and Y.Y.), 2023YFA1406003 (F.H.), 2021YFB3501202 (F.H.)), the National Natural Sciences Foundation of China (Grant Nos. 52088101 (B.S.), 92263202 (F.H.), U23A20550 (F.H.), 22361132534 (J.W. and F.H.)), and the Strategic Priority Research Program (B) of the Chinese Academy of Sciences (XDB33030200 (B.S. and F.H.)). A portion of this work was carried out at the Synergetic Extreme Condition User Facility (SECUF). J.Y.L. and V.F. acknowledge the support of AEI/FEDER-UE (grants PID2019-105720RB-I00 (J.Y.L. and V.F.) and PID2023-146047OB-I00 (J.Y.L. and V.F.) from AEI/10.13039/501100011033), and of the Chinese Academy of Sciences President’s International Fellowship Initiative (PIFI) for visiting scientists (Grants No. 2024VMC0006 (J.Y.L.), 2024VMA0021 (V.F.)). J.Y.L. acknowledges an EMERGIA 2021 Fellowship (EMC21_00418 (J.Y.L.)) from Junta de Andalucía., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Giant room-temperature magnetocaloric effect MM′X alloys explored by machine learning

  • Qiao, Kaiming
  • Cui, Zhe
  • Hao, Xiaowen
  • Zhao, Qian
  • Xu, Yuanxiang
  • Wang, Dekun
  • Liu, Jingyi
  • Wang, Doudou
  • Xia, Yuanguang
  • Yin, Wen
  • Hao, Jia Zheng
  • He, Lunhua
  • Romero-Muñiz, Carlos
  • Law, Jia Yan
  • Franco, V.
  • Ren, Qingyong
  • Zhang, Hu
Magnetic refrigeration is emerging as a promising alternative to conventional gas compression refrigeration. The key to advancing this technology lies in identifying materials with high magnetocaloric effect (MCE). However, traditional experimental methods require time-consuming and labor-intensive experimentation to screen compositions. Herein, we developed a machine learning (ML) model utilizing the Random Forest algorithm to efficiently identify MM'X alloy compositions with giant MCE near room temperature based on a small dataset (<200). The ML-predicted results were perfectly confirmed by the validation experiments. Notably, while most typical magnetic refrigeration materials near room temperature show a maximum ∆S around or <20 kg<sup>-1</sup> K<sup>-1</sup>(0–5 T), our predicted alloys show a remarkable ∆S of up to 51 kg<sup>-1</sup> K<sup>-1</sup>, which is more than four times higher than that of the benchmark material, Gd. The origin of this giant MCE is linked to atomic disorder and lattice ∆S predominantly from Ni atoms, as confirmed through spherical aberration corrected transmission electron microscopy, neutron powder diffraction and element-resolved vibrational density of states analysis. This work accelerates the discovery of magnetic refrigerants and significantly promotes the development of magnetic refrigeration., This work was supported by the National Key Research and Development Program of China (Grant No.: 2021YFB3501204); the National Natural Science Foundation of China (Grant Nos.: 52171169, 52101210, 52161025, 52101236, 52401252, and 12474024); the State Key Laboratory for Advanced Metals and Materials (Grant No.: 2023-ZD01); Fundamental Research Funds for the Central Universities (Grant No.: FRF-TP-24–004A); USTB Research Center for International People-to-people Exchange in Science, Technology and Civilization (Grant No.: 2024KFZD001). Z.C., C.R.M. J.Y.L and V.F. acknowledge funding from AEI (PID2019–105720RB-I00/AEI/10.13039/501100011033 and PID2023–146047OB-I00/AEI/10.13039/50110001103). J.Y.L. acknowledges an EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418). C.R.M. acknowledges a Ramón y Cajal fellowship of the Spanish Ministry of Science and Innovation (ref. RYC2021–031176-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Magnetic reversibility accompanied by thermal hysteresis in magnetocaloric materials: A lock-in thermography study

  • Revuelta-Losada, Jorge
  • Khan, Aun N.
  • Moreno-Ramírez, Luis M.
  • Law, Jia Yan
  • Giri, Anit K.
  • Franco, V.
Lock-in infrared thermography (LIT) was used to obtain the reversible adiabatic temperature change ( ) from an oscillating magnetic field up to a maximum of 1.5 T. Several paradigmatic magnetocaloric materials exhibiting diverse thermomagnetic phase transitions were studied: (1) Gd, undergoing a second-order transition; (2) LaFe11.38Mn0.28Si1.34-H undergoing a magneto-elastic first-order transition; and (3) Ni48.6Mn35.9In15.5 and (4) Ni36Co14Mn35Ti15 Heusler alloys, both undergoing magneto-structural first-order transition with varying degrees of overlap with the second-order transition of austenite and associated hysteresis. LIT increases resolution by two orders of magnitude compared to traditional thermography. This advanced capability facilitates the detection of features in the responses that would otherwise be challenging to identify. Furthermore, the phase with respect to the excitation serves as an indicator of the phase transition dynamics. Importantly, while the measurements remain reversible against field oscillations, first-order thermomagnetic phase transitions driven by non-saturating fields show different behaviors for heating and cooling curves, manifesting thermal hysteresis and the irreversibility of the transition under those conditions. This highlights the significance of direct characterization methods of the magnetocaloric response over indirect approaches and its usefulness for the design of materials for efficient refrigeration devices., Work funded by AEI/10.13039/501100011033 (projects PID2019-105720RB-I00 and PID2023-146047OB-I00), US Air Force Office of Scientific Research and US Army Research Laboratory (grant FA8655-21-1-7044), DEVCOM Army Research Laboratory, USA, grant (W911NF-19-2-0212), the European Innovation Council, funded by the European Union, via project Magccine (Grant agreement 101161135), the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant No. 101101461), project PPIT2024-31833, co-financed by EU, Ministerio de Hacienda y Función Pública, FEDER and Junta de Andalucía, and VII Plan Propio de Investigación from University of Seville. J.Y.L acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418). ANK acknowledges a FPI fellowship from the Spanish MCIN/AEI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Quantitative determination of the order phase transitions of multicaloric materials: The validity of n-overshoot

  • Reis, Mario
  • Law, Jia Yan
  • Franco, V.
Caloric materials have a significant response (adiabatic temperature change or isothermal entropy change) in the vicinity of a phase transition, with the magnitude and characteristics of this response being strongly dependent on the nature of the transition. It is therefore important to be able to quantitatively ascertain the order of the transition (first or second order) to predict if the phase transformation implies a significant hysteresis, which is detrimental from the application point of view. In the case of magnetocalorics, the overshoot above two of the exponent n, describing the field dependence of the isothermal entropy change, has been demonstrated to be a suitable fingerprint of first order phase transitions. In this work, we demonstrate that the criterion holds for multicaloric materials in which the magnetocaloric transformation is altered by pressure., J.Y.L. and V.F. acknowledge grants PID2019-105720RB-I00 and PID2023-146047OB-I00 funded by AEI/10.13039/501100011033, Spain; the Air Force Office of Scientific Research, United States (FA8655-21-1-7044); and project PPIT2024-31833 co-financed by EU, Ministerio de Hacienda Función Pública, Spain, FEDER, Spain and Junta de Andalucía. J.Y.L. acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (ref. EMC21_00418). M.S.R. thanks FAPERJ and CNPq., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Compositionally complex alloying in multiple-R-Co2 laves phase system: Lattice distortion and static and dynamic magnetocaloric properties

  • Tian, Zhengying
  • Law, Jia Yan
  • Moreno-Ramírez, Luis M.
  • Liu, Yao
  • Hu, Fengxia
  • Gamzatov, Adler G.
  • Aliev, Akhmed
  • Kadirbardeev, Anvar
  • Wang, Jing
  • Zhai, Wei
  • Wei, Bingbo
  • Franco, V.
  • Shen, Baogen
Compositionally complex (CC) alloying strategies can improve performance under operational conditions as demonstrated by the advancements of high-entropy alloys but their effect on the thermomagnetic functionality remains unclear. The findings of this work reveal the CC effects on thermomagnetic functionality by systematically investigating CC alloying at the rare-earth (R) site of the RCo2 system, particularly focusing on both static and dynamic magnetocaloric effects. By combining Tb, Dy, Ho, Er and Gd elements in near-equiatomic proportions (which increases the configurational entropy of mixing), significant isothermal entropy changes, akin to those observed in the well-known DyCo2, are found across a broad temperature span, indicating the potential for multi-stage coupling applications. Exponent n analysis indicates the series is near the critical composition, enabling substantial responses without thermal hysteresis. Direct measurements of the adiabatic temperature change of Dy0.25Tb0.25Ho0.25Er0.25Co2 show that CC alloying at the R-site does not decrease cyclic performance at frequencies below 5 Hz in alternating magnetic fields with respect to DyCo2. High-resolution electron micrographs and variable temperature X-ray diffraction results reveal a 39.5 % increase in lattice distortion compared to DyCo2, raising the phase transition energy barrier from 0.28 to 0.47 eV. These findings shed insights into the dynamic thermomagnetic responses and underscore the potential of CC alloying to improve the magnetocaloric effects of RCo2 family., This work was supported by the Science Center of the National Science Foundation of China (52088101), the National Key R&D Program of China (2023YFA1406003, 2020YFA0711500, 2021YFB3501202), the National Natural Science Foundation of China (U23A20550, 92263202, 22361132534) and the Strategic Priority Research Program B (XDB1270201) and the key programs of Chinese Academy of Sciences. The study was also supported by the Russian Science Foundation, Grant No. 24–43–00156, and the NSFC, Grant No.2231101520. JYL, LMMR and VF acknowledge Grants PID2019–105720RB-I00 and PID2023–146047OB-I00 funded by MCIN/AEI/ 10.13039/501100011033, the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant No. 101101461), the Research Council of Norway within the project LIQUID-H, project PPIT2024–31833, co-financed by EU, Ministerio de Hacienda y Función Pública, FEDER, and Junta de Andalucía, and VII Plan Propio de Investigación from University of Seville. JYL and VF acknowledge the support of Chinese Academy of Sciences President’s International Fellowship Initiative (PIFI) for visiting scientists (Grant No. 2024VMA0021, 2024VMC0006). JYL acknowledges EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhanced local homogeneity obtained by induction melting for optimizing reversible magnetocaloric response in all-d-metal Ni(Co)-Mn-Ti Heusler alloys

  • Khan, Aun N.
  • Moreno-Ramírez, Luis M.
  • Garcia-Garcia, F. Javier
  • Varela, María
  • Revuelta-Losada, Jorge
  • Law, Jia Yan
  • Franco, V.
All-d-metal Ni(Co)-Mn-Ti Heusler alloys showing giant magnetocaloric properties at near room temperature are highly desirable for solid-state cooling applications. However, when exploring the literature, the reported magnetocaloric properties vary widely, hinting at the importance of the synthesis route. In this work, we select the Ni36Co14Mn35Ti15 composition, and systematically explore different synthesis routes such as arc melting, suction casting and induction melting, to investigate their effect on the magnetostructural transition and magnetocaloric properties. Among the studied samples, the induction melted sample shows the most abrupt martensitic transformation and the lowest thermal hysteresis: 4 K versus 8 K for arc melted and 17 K for suction casted. This abruptness leads to a remarkable isothermal entropy change of 23 J kg− 1 K− 1 for 1.5 T, along with the largest reversible response to date of 29 J kg− 1 K− 1 for 5 T, as compared to the reported magnetocaloric materials undergoing magnetostructural transition. The quantitative analysis of the elemental maps for the studied alloy series reveals that the larger homogeneity in the Ti distribution achieved by induction melting, when compared to the arc melted and suction casted counterparts, should be responsible for the sharpness of phase transformation and the low thermal hysteresis observed., Work supported by Projects PID2019-105720RB-I00, PID2021-1229890OB-C51, and PID2023-146047OB-I00 funded by MCIN/AEI/10.13039/501100011033, US Air Force Office of Scientific Research (FA8655-21-1-7044), the Clean Hydrogen Partnership and its members within the project HyLICAL (Grant no. 101101461), the Research Council of Norway within project LIQUID-H, the European Innovation Council, funded by the European Union, via project CoCoMag (Grant no. 101099736), project PPIT2024-31833, co-financed by EU, Ministerio de Hacienda y Función Pública, FEDER and Junta de Andalucía, and Sevilla University under VII PPIT-US program. JYL acknowledges an Emergia Fellowship from Junta de Andalucía (Ref. EMC21_00418). ANK acknowledges a FPI fellowship from the Spanish MCIN/AEI., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A criticality-aware design framework for sustainable magnetocaloric high-entropy alloys: the MnFeNiCuSi system

  • Guisado-Arenas, E.
  • Cui, Zhe
  • Moreno-Ramírez, Luis M.
  • Romero-Muñiz, Carlos
  • Law, Jia Yan
  • Franco, V.
Rising global temperatures alongside increasing energy demand highlight the imperative for sustainable and energy-efficient refrigeration technologies. Magnetic refrigeration, based on the magnetocaloric effect (MCE), presents a compelling solid-state alternative to traditional vapor-compression systems. However, many high-performance magnetocaloric materials rely on critical elements such as rare earths, cobalt and germanium. Despite extensive compositional flexibility, high-entropy alloys (HEAs) have predominantly been investigated in equiatomic compositions incorporating significant quantities of highly critical elements to achieve large MCE or mixing rare-earth elements in majority proportions that only yield moderate MCE values, thereby failing to address issues of material criticality. In this study, we present a criticality-aware design strategy for the MnNiSi-HEA system, exemplifying a prototype of the latest third-generation HEAs. Various substitutional approaches were evaluated to achieve the coupling between magnetic and structural transitions. The most effective pathway, identified through the co-substitution of Fe and Cu reduces the structural transition temperature by over 900 K relative to MnNiSi while preserving the ferromagnetic characteristics of the low-temperature phase, successfully inducing a first-order magnetostructural transformation near room temperature. The resulting alloys, MnFeNiCu Si, exhibit coupled transitions spanning more than 100 K and demonstrate the highest MCE reported to date among HEAs free of cobalt, germanium and rare-earth elements, outperforming previous records by 360%. Complementary density functional theory calculations confirm the stability of the orthorhombic and hexagonal phases. Predictions of lattice entropy change closely match calorimetric measurements. This study establishes a new benchmark for low-criticality magnetocaloric HEAs, underscoring that optimal functional performance and sustainable material development can be achieved concomitantly. The proposed design methodology offers a valuable framework for advancing resource-resilient solid-state cooling materials and underscores the potential of HEAs as a platform for sustainable functional materials., This study was funded by the European Union within CoCoMag Project (Grant No. 101099736), Project PID2023-146047OB-I00 (from AEI/10.13039/501100011033), Project PPIT2024-31833, co-financed by EU, Ministerio de Hacienda y Función Pública, FEDER and Junta de Andalucía, and VII Plan Propio de Investigación from University of Seville. We gratefully acknowledge the computing time provided by the Servicio de Supercomputación de la Universidad de Granada in Albaicín supercomputer. E.G.A. acknowledges an FPU scholarship (Ref. FPU23/03426) from the Spanish MICIU. C.R.M. acknowledges financial support by the Ramón y Cajal program of the Spanish Ministry of Science and Innovation (Ref. RYC2021-031176-I). J.Y.L. acknowledges an EMERGIA 2021 fellowship from Junta de Andalucía (Ref. EMC21_00418)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Landau-Lifshitz-Bloch simulations of the magnetocaloric effect in continuous ferromagnetic-paramagnetic transitions

  • Moreno-Ramírez, Luis M.
  • Sánchez-Tejerina, Luis
  • Alejos, Óscar
  • Franco, V.
  • Raposo, Víctor
The usefulness of modeling magnetocaloric materials expands from the understanding of their behavior to the prediction of new materials, playing a fundamental role in the optimization of their performance. In contrast with other areas of magnetic materials research, micromagnetic simulations of magnetocaloric materials are scarce due to the difficulty of modeling the material in the vicinity of the transition. To solve this limitation, we propose the use of micromagnetic simulations based on the Landau-Lifshitz-Bloch equation to study the magnetocaloric effect of a ferromagnetic material around its Curie transition. Following our proposed methodology, we obtain reliable isothermal entropy change curves for both monocrystalline and polycrystalline configurations, where we consider different anisotropic contributions. The robustness of the method was evaluated, yielding results that agreed with previous experimental and theoretical observations. Our study shows that micromagnetic simulations are a powerful tool for analyzing magnetocaloric materials with complex microstructures., We acknowledge funding from Projects PID2023-150853NB-C31 and PID2023-146047OBI00 funded by MICIU/AEI/10.13039/501100011033 and FEDER, and project Magccine funded by the European Union and the European Innovation Council., Peer reviewed