Pasar al contenido principal

INTEGRACION DE SUBPRODUCTOS AGROALIMENTARIOS REVALORIZADOS EN UN MODELO DE ECONOMIA CIRCULAR: INTENSIFICACION DE PROCESOS Y EVALUACION DE SOSTENIBILIDAD

PID2019-106148RR-C42

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITÈCNICA DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 17
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing ultrasonic-assisted drying of low-porosity products through pulsed electric field (PEF) pretreatment: The case of butternut squash

  • Llavata-Cabrero, Beatriz
  • Rosselló, C.
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Ultrasonic-assisted drying is an effective technique for accelerating drying processes, particularly for products with high porosity. The structural changes induced by pulsed electric field (PEF) treatment can make lowporosity products more susceptible to the effects of ultrasound during drying. This study aimed to investigate the influence of PEF treatment on the structure of low-porosity products, such as butternut squash, and to evaluate its effect on ultrasonic-assisted drying. PEF pretreatment altered the physicochemical and microstructural properties of butternut squash. Thus, the higher the energy input, the higher the cell disintegration rate, the lower the shearing force and the lower the water holding capacity. For the same energy input applied, no influence was observed from the different combinations of pulse number and electric field intensity used. The microstructural analysis also showed greater effects with increasing intensity of PEF treatments. All these changes affected the subsequent drying, increasing the drying rate of conventional drying. Moreover, PEF pretreatment enhanced the ultrasound effects when applied during drying, reducing drying time by up to 47% when moderate PEF intensity was used. Therefore, PEF pretreatment under the appropriate conditions could make ultrasound-assisted drying of low-porosity products, such as butternut squash, more feasible., This work was supported by the PID2019-106148RRC42 grants funded by MCIN/AEI/10.13039/501100011033; the PID2022-136889OB-C21 and PID2022-136889OB-C22 grant funded by MCIN/AEI/10.13039/501100011033 and by ERDF/EU, and the PhD grant of Beatriz Llavata from the Universitat Politecnica de Valencia (PAID-01-19).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oleuropein extraction from olive leaves assisted by moderate electric fields and high-power ultrasound. A parametric study

  • Khanlar, Malikeh
  • Collazos-Escobar, Gentil Andres|||0000-0002-0659-8897
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Moderate electric field (MEF) or power ultrasound (US) are alternative technologies that could enhance conventional extraction processes, increasing yield and quality, shortening processing and reducing energy needs. This study analyses the feasibility of using MEF and US to improve oleuropein extraction from olive leaf. For this purpose, extraction kinetics (distilled water, 50 degrees C) were carried out in different olive leaf/water ratios (OLWR: 1, 5, 10, 15 % w/v), with and without the application of MEF (12.5 V cm(-1)) at different electric frequencies (MEF-FR: 300, 600, 900 and 1200 Hz). Furthermore, the sequential application of MEF and US (3.2 W/L; 21.48 kHz) was also assessed. The experimental extraction kinetics were modelled using Two Terms, Naik and Peleg models. Multi-Factor ANOVAs (p < 0.05) permitted the analysis of the influence of OLWR, MEF-FR and US on the yield. The results showed that the maximum yield (0.016 mg oleuropein/g olive leaf d.m) was found at the lowest OLWR tested (1 % w/v) with MEF application, increasing a 34.2 % the yield of the conventional extraction. As regards the electric frequency, the fastest kinetics and the greatest yield (0.022 mg oleuropein/g olive leaf d.m) were achieved at 300 Hz. The combined application of MEF and US shortened the extraction, finding the maximum yield (0.024 mg oleuropein/g olive leaf d.m) after 10 min instead of the 40 min needed for conventional extraction (0.012 mg oleuropein/g olive leaf d.m), which means an extraction time reduction of 75 %. The modified Peleg model provided the best fit. Therefore, MEF and US significantly improved the efficiency of oleuropein extraction, thus highlighting their potential in extraction processes., This study was supported by the PID2019-106148RRC42 grant with funding provided by MCIN/AEI/10.13039/501,100,011,033 and the PID2022-136889OB-C22 grant funded by MCIN/AEI/10.13039/501,100,011,033/ERDF and by ERDF/EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Evaluation of the addition of artichoke by-products to O/W emulsions for oil microencapsulation by spray drying

  • Umaña, Mónica
  • Wawrzyniak, Pawel
  • Rossello Matas, Carmen
  • Llavata-Cabrero, Beatriz
  • Simal Florindo, Susana
[EN] This study aimed to evaluate the use of artichoke bracts in oil microencapsulation by spray drying. Thus, 1% and 2% w/w of this material was added to sunflower O/W emulsions to partially replace maltodextrin and substitute Tween (R) 20. Emulsions were compared with a control containing only maltodextrin as wall material and Tween (R) 20 as emulsifier. The emulsion containing 2% of artichoke exhibited higher (p < 0.05) viscosity and stability against coalescence and flocculation (24 h) and 20% higher encapsulation efficiency after spray drying, compared with control. The three microcapsules showed similar microstructure, density, porosity, flow properties, and Tg. Microcapsules containing artichoke exhibited, on average, 15% larger particles, 19% lower moisture content, and 9% lower solubility, besides perceptible colour changes. Microcapsules containing artichoke (2%) showed lower oxidation indicators content (37%) after spray drying and over 2 months of controlled storage (35 degrees C, 50% relative humidity) than control. After 90 days, decreases in linoleic acid were observed in all the samples (up to 24%), with increases of oleic and saturated fatty acids. The control showed the highest increase in saturated fatty acids (73%). Hence, artichoke bracts can be exploited for their application in lipid microencapsulation because of their emulsifier properties and the oxidative protection they provide., The authors acknowledge the financial support of the National Institute of Research and Agri-Food Technology (INIA) , ERDF funds EU, and the Spanish research agency (AEI) (RTA2015-00060-C04-03 and RTA2015-00060-C04-02) , and the AEI (PID2019-106148RR-C43 AEI 10.13039/501100011033 and PID2019-106148RRC42 AEI 10.13039/501100011033 projects) ; and the Ministry of Science Innovation and Universities (MCIU) for the research fellowship (FPU15/03040) and the mobility aid (EST17/00152) . We would also like to thank Dr. Fernando Hierro, Trinidad Garcia, Josep Agusti Pablo C`anaves, and Dr. Joan Cifre Bauz`a, from the "Serveis Cientificote`cnics" of the University of the Balearic Islands for their assistance with SEM and optical microscopy, gas chromatography, HPLC and TGA and DSC respectively.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Hot-air ultrasound-assisted drying of green wheat and barley malts to enhance process kinetics, amylase activity and their application in bread formulation

  • Carregari-Polachini, Tiago
  • Norwood, Eve Anne
  • Chevallier, Sylvie Swyngedau
  • Le-Bail, Patricia
  • Le-Bail, Alain
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Malting produces techno-functional cereal ingredients but it is considered a time-con-suming process. The assistance of ultrasound (US) appears to enhance the drying step of the green malts. In this sense, partially germinated wheat and barley were convectively dried with and without US. The obtained malts were analyzed regarding amylolytic ca-pacity and their performance as ingredient in bread formulations. Compared to oven drying, hot air convective US-assisted system decreased drying time by intensifying drying velocity up to 56 % and 129 %, respectively. Similarly, alpha-and beta-amylase activities were intensified by up to 88 % and 10.5 %, respectively, when drying occurred with US. Breads formulated with US-dried malts resulted in better bread-making properties, mainly peak torque and setback values. Specific volume, crust color and pore distribution in real bread were also improved together with hardness of degassed crumb samples. Therefore, US can be used not only to intensify the conventional malting process but also to produce more efficient ingredients.(c) 2023 Institution of Chemical Engineers. Published by Elsevier Ltd. All rights reserved., The authors acknowledge the Région du Pays de la Loire/RFI Food for Tomorrow for funding the CLEAN project together with ONIRIS-GEPEA, and the MCIN/AEI/10.13039/501100011033 (Grant PID2019-106148RR-C42) for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Cider apple pomace as a source of nutrients: Evaluation of the polyphenolic profile, antioxidant and fiber properties after drying process at different temperatures

  • Llavata-Cabrero, Beatriz
  • Picinelli, A.
  • Simal, S.
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Apple pomace, the by-product of the cider industry, contains a high content of antioxidant compounds and dietary fiber. Drying would allow its preservation for a later use. The aim of this study was to evaluate the effect of the drying temperature on the drying kinetics, antioxidant properties and the fiber characteristics. For this, drying experiments were performed at different temperatures (40-120 degrees C). The increase in temperature enhanced the drying rate, as was shown by the effective diffusivity and mass transfer coefficient identified by modelling. The influence of temperature was quantified through the activation energy (38.21 kJ/mol). Regarding the retention of antioxidant properties, the best results were found at 80-100 degrees C while 40-60 degrees C was the best temperature range for the fiber characteristics. Therefore, 80 degrees C could be an adequate temperature for drying of cider apple pomace, as it represents a good balance between kinetics, and antioxidant and fiber properties., The authors acknowledge the financial support from the grant PID2019-106148RRC42 and PID2019-106148RRC43 funded by MCIN/AEI/10.13039/501100011033, the grant for open access charge of the Universitat Politècnica de València and the PhD grant of Beatriz Llavata from the Universitat Politecnica de Valencia (PAID-01-19).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Artificial Neural Networks to Optimize Oil-in-Water Emulsion Stability with Orange By-Products

  • Umaña, Mónica
  • Llull, Laura
  • Eim, Valeria Soledad
  • Simal, Susana
  • Bon Corbín, José|||0000-0002-0457-9705
[EN] The use of artificial neural networks (ANNs) is proposed to optimize the formulation of stable oil-in-water emulsions (oil 6% w/w) with a flour made from orange by-products (OBF), rich in pectins (21 g/100 g fresh matter), in different concentrations (0.95, 2.38, and 3.40% w/w), combined with or without soy proteins (0.3 and 0.6% w/w). Emulsions containing OBF were stable against coalescence and flocculation (with 2.4 and 3.4% OBF) and creaming (3.4% OBF) for 24 h; the droplets' diameter decreased up to 44% and the viscosity increased up to 37% with higher concentrations of OBF. With the protein addition, the droplets' diameter decreased by up to 70%, and flocculation increased. Compared with emulsions produced with purified citrus pectins (0.2 and 0.5% w/w), OBF emulsions exhibited up to 32% lower viscosities, 129% larger droplets, and 45% smaller Z potential values. Optimization solved with ANNs minimizing the droplet size and the emulsion instability resulted in OBF and protein concentrations of 3.16 and 0.14%, respectively. The experimental characteristics of the optimum emulsion closely matched those predicted by ANNs demonstrating the usefulness of the proposed method., The authors would like to acknowledge the Spanish research agency (AEI) MCIN/AEI/10.13039/501100011033 for the financial support for the projects (PID2019-106148RR-C43 and PID2019-106148RRC42).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pulsed electric field (PEF) pretreatment impact on the freezing and ultrasound-assisted atmospheric freeze-drying of butternut squash and yellow turnip

  • Llavata-Cabrero, Beatriz
  • Clemente Polo, Gabriela|||0000-0003-1173-9903
  • Bon Corbín, José|||0000-0002-0457-9705
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] This study explores the impact of the application of pulsed electric field (PEF) pretreatment in the freezing and in the power ultrasound-assisted (US) atmospheric freeze-drying (AFD) of two different products: butternut squash and yellow turnip. Two PEF pretreatments were applied, inducing cell disintegration indexes (CDI) of 0.25 and 0.75. The results showed that PEF pretreatments significantly altered the microstructure of butternut squash and yellow turnip, but in a different way. These changes led to a significant shortening of the freezing process by up to 11.6%. Although PEF pretreatments significantly affected the drying rate of AFD, the effect was maximum when combined with ultrasound-assisted AFD. However, the PEF treatment that most enhanced ultrasound-assisted drying kinetics varied between products: a moderate treatment (CDI of 0.25) was most effective for butternut squash (37.3% time reduction), while a more intense treatment (CDI of 0.75) was better in the case of yellow turnip (44.2% time reduction). These findings indicate an enhancement of the atmospheric freeze-drying process achieved through the combined application of PEF and US under adequate conditions., This study was supported by the PID2019-106148RRC42 grants funded by MCIN/AEI/10.13039/501100011033; the PID2022-136889OB-C22 grant funded by MCIN/AEI/10.13039/501100011033 and by ERDF/EU, and the PhD grant of Beatriz Llavata from the Universitat Polit`ecnica de Val`encia (PAID-01-19). Funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Analysis of Machine Learning Algorithms for the Computer Simulation of Moisture Sorption Isotherms of Coffee Beans

  • Collazos-Escobar, Gentil Andres|||0000-0002-0659-8897
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Carcel, J. A.|||0000-0002-3796-6146
  • Gutiérrez-Guzmán, N
  • Váquiro, H. A.
[EN] Digital twin¿based machine learning (ML) techniques can improve the control of the storage conditions of dried products, strengthening the classical water sorption isotherm¿based approach by including additional process variables. In this study, water sorption isotherms of dried parchment and green coffee beans were experimentally determined at 25, 35, and 45 °C using the dynamic dew point (DDI) method. Experimental data (both coffee bean types and temperatures) were simultaneously modeled by means of three ML techniques, support vector machine (SVM), random forest (RF), and artificial neural networks (ANN), with 75% of data used for model training and 25% for validation. The hyperparameters were identified by minimizing the mean square error (MSE). The ML model¿s accuracy was addressed by a multiway ANOVA on the mean relative error (MRE), the coefficient of determination (R2), and the computation time (CT). The sorption isotherms were significantly (p-value < 0.05) affected by the type of coffee and the temperature. The SVM model provided the best fit (MRE < 1% and R2 > 99%) in a reasonable CT (< 13 s). These results revealed the potential of ML models as a robust tool for the fast prediction of the equilibrium moisture content, including additional variables such as the type of coffee stage (dried parchment or green) and temperature; this paves the way for their industrial-level implementation to assist storage management., This study was supported by the grant PID2022-136889OBC22, funded by MCIN/AEI/https://doi.org/10.13039/501100011033, and by ERDF/EU, and the PhD grant of Gentil A. Collazos-Escobar PRE2020-092255, funded by the State Training Subprogram of the State Plan for Scientific and Technical Research and Innovation 2017 2020 and the European Social Fund. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of freeze-thaw and PEF pretreatments on the kinetics and microstructure of convective and ultrasound-assisted drying of orange peel

  • Llavata-Cabrero, Beatriz
  • Mello, Ronaldo Elias
  • Correa, J.L.G
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] The main waste generated by juice industry comprises orange peels, which have a great upcycling potential once stabilized. Drying is the most used method for this purpose, but the high energy consumption prompts interest in its intensification. This study assessed the influence of freeze-thaw and pulsed electric field (PEF) pretreatments in conventional and airborne ultrasound-assisted drying (50 degrees C) of orange peels. None of these pretreatments alone got to reduce processing times significantly, but combined with ultrasound-assisted drying produced a significant shortening of the process. This was particularly important in the lower intensity PEF pretreatment tested (0.33 kJ/kg), indicating the existence of optimum conditions to carry out the pretreatments. Microstructure analysis revealed that the application of ultrasound during drying led to better preservation of the sample structure. Thus, the integration of pretreatment techniques to ultrasound-assisted drying may not only shorten the process but also help to preserve the original structure., This work was supported by the PID2019-106148RRC42 grant funded by MCIN/AEI/ 10.13039/501100011033; PID2022-136889OB-C22 grant funded by MCIN/AEI /10.13039/501100011033/ERDF, a way of making Europe, and the Ph.D. grant of Beatriz Llavata from the Universitat Politecnicade Valencia (PAID-01-19). We are also grateful for the economic support of the Coordenac & atilde;o de Aperfeicoamento de Pessoal de Nivel Superior-Brasil(Capes)-Finance Code 001, Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) and Fundac & atilde;o de Amparo a Pesquisa de MinasGerais (FAPEMIG).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Effect of ultrasound on henna leaves drying and extraction of lawsone: Experimental and modeling study

  • Bennaceur, Said
  • Berreghioua, Abdelaziz
  • Bennamoun, Lyes
  • Draoui, Belkacem
  • Abid, Mostafa
  • Mulet Pons, Antonio|||0000-0001-6748-2663
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] The effect of drying temperature and the application of ultrasound on drying kinetics of Lawsonia inermis (henna) leaves and the extraction of lawsone from the dried samples was addressed. Indeed, henna leaves were dried with and without the application of ultrasound (21.7 kHz, 30.8 kW/m3) at 40, 50 and 60 C with a constant air velocity (1 m/s). As expected, both the increase of temperature and the application of ultrasound decreased the drying time and increased the rate of extraction of the lawsone. The values of the effective diffusion coefficients obtained were used to quantify this influence showing the value increases with higher drying temperature and the application of ultrasound. Moreover, the influence of temperature was quantified by the estimation of the activation energy from an Arrhenius-type equation (46.25 kJ/mol in the case of drying without ultrasound application and 44.06 kJ/mol in the case of ultrasonically-assisted drying). Regarding the influence of studied variables on lawsone extraction yield, the higher is the temperature, the lower is the yield, probably linked with lawsone degradation reaction due to thermal treatment. On the contrary, the application of ultrasound improved the extraction yield mainly at the lower drying temperature tested of 40 C., This research was funded by Science and Innovation Ministry of Spain, grant number PID2019-106148RRC42.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combined Effect of Airborne Ultrasound and Temperature On the Drying Kinetics and Quality Properties of Kiwifruit (Actinidia Deliciosa)

  • Llavata-Cabrero, Beatriz
  • Femenia, A.
  • Clemente Polo, Gabriela|||0000-0003-1173-9903
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Drying is one of the most used options for the stabilization of the surpluses resulting from kiwifruit industrialization for their upcycling. However, drying conditions, such as drying temperature or ultrasound application during drying to intensify the process, can highly affect its final quality. Thus, with the aim to assess the combined influence of temperature and ultrasound application in the drying process of kiwifruit, ultrasonically assisted drying experiments were performed at 40, 50, 60 and 70 oC. The process kinetics was greatly dependent on the temperature, as shown by the activation energy value obtained, 30.95 kJ/mol. Ultrasound application increased the drying kinetics, with its influence being more marked at the lowest temperatures tested. The increase in effective diffusivity and the mass transfer coefficient induced by ultrasound application was similar to the increase induced by an increase of drying temperature of 10 oC. Drying caused a significant change in the color although the use of ultrasound helped to preserve it at the higher temperatures. Antioxidant capacity and vitamin C content decreased after drying, but the total phenolic content increased. The greatest retention of the antioxidant properties was observed in ultrasonically assisted samples dried at the highest temperatures. In the case of fiber properties, the best results were obtained at intermediate ones. Drying kiwifruit at 60 oC with ultrasound application could serve as a means of balancing a fast drying process and good final quality., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This work was supported by the grants PID2019-106148RRC42 and PID2019-106148RRC43 funded by MCIN/AEI/10.13039/501100011033 and the PhD grant of Beatriz Llavata and funding for open access charge from the Universitat Politecnica de Valencia (PAID-01-19).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Artichoke by Products as a Source of Antioxidant and Fiber: How It Can Be Affected by Drying Temperature

  • Borsini, Ariel A.
  • Llavata-Cabrero, Beatriz
  • Umaña, Mónica
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] The reuse of food industry by-products constitutes one of the essential pillars of the change from a linear to a circular economic model. Drying is one of the most affordable techniques with which to stabilize by¿products, making their subsequent processing possible. However, it can affect material properties. The objective of this study was to assess the effect of the drying temperature on the drying kinetics and final quality of the main artichoke processing by¿products, bracts and stems, which have never been studied as independent materials. For this purpose, air drying experiments at different temperatures (40, 60, 80, 100 and 120 °C) were carried out. The alcohol insoluble residue (AIR) and the total phenolic content (TPC), antioxidant capacity (AC) and vitamin C (VC) of the fresh and dried samples were determined. The bracts dried faster than the stems, increasing drying rate with temperature. The two by¿products presented relatively large amounts of AIR, the content being higher in bracts, but better functional properties in stems. The TPC, AC and VC values of the dried samples decreased in relation to the fresh samples, with the temperatures of 40 °C (bracts) and 120 °C (stems) being the most adequate for the purposes of preserving these characteristics, This research was funded by INIA (Spain)-ERDF, grant number RTA2015-00060-C04-02 and RTA2015-00060-C04-03; Science and Innovation Ministry of Spain and grant number PID2019106148RR-C42. The APC was funded by the Science and Innovation Ministry of Spain, grant number PID2019-106148RR-C42.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Sorption isotherms and thermodynamic properties of Pomegranate Peels

  • Ben Slimane, Nihel
  • Bagane, Mohamed
  • Mulet Pons, Antonio|||0000-0001-6748-2663
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Convective drying is the most widely used technique to stabilize by-products in the food industry, permitting later processing. A thorough knowledge of the relationship between moisture content and water activity allows the optimization of not only drying operations, but the settings of storage conditions. Thus, the thermodynamic properties of pomegranate peels were determined during the desorption process. Experimental sorption isotherms at 20, 30, 40 and 50 degrees C showed type II Brunauer behavior. Eight different theoretical and empirical equations were fitted to the experimental results; the theoretical GAB model and the empirical Peleg model were the ones that achieved the best fit (R-2 of 0.9554 and 0.974, respectively). The Clausius-Clapeyron equation and the enthalpy-entropy compensation theory were used to determine the thermodynamic parameters. The isosteric heat determined from the sorption isotherms decreased regularly as the equilibrium moisture content rose (from 8423.9 J/mol at 0.11 kgH(2)O/kg d.m. to 3837.7 J/mol at 0.2 kgH(2)O/kg d.m.). A linear compensation was observed between enthalpy and entropy, which indicated an enthalpy-controlled sorption process., Grant PID2019-106148RR-C42 funded by MCIN/AEI/10.13039/501100011033.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Characterization of the electropermeabilization induced by pulsed electric field (PEF) technology and its effect on the ultrasonic-assisted drying of yellow turnip

  • Llavata-Cabrero, Beatriz
  • Lyng, J.
  • Bedane, T. F.
  • Simal, S.
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Obtaining snacks from the drying of surplus vegetables is an alternative to reduce waste. A combination of pulsed electric field (PEF) pretreatments and ultrasonic-assisted (US) drying could significantly enhance the process, as this is the aim of this study. PEF pretreatments of yellow turnip significantly affected the cell disintegration index (CDI) and the water holding capacity (WHC): the more intense the PEF treatment, the greater the CDI and the lower the WHC. Both parameters, CDI and WHC, showed a high degree of correlation which indicated that WHC can be an alternative index to CDI to assess PEF effects on food matrices. Regarding yellow turnip drying (40¿°C), PEF pretreatments (CDI 0.25 and 0.75) and US application (20.5¿kW/m3) significantly accelerated the operation, but it was the combination of both technologies that provided the shortest process (CDI 0.75). PEF could generate changes in the food matrix which enhance the US effects on mass transfer., This work was supported from Agencia Estatal de Investigacion by the PID2019-106148RRC42 and PID2019-106148RRC43 grants funded by MCIN/AEI/10.13039/501100011033; the PID2022-136889OB-C22 grant funded by MCIN/AEI/10.13039/501100011033/ERDF, a way of making Europe, and the PhD grant of Beatriz Llavata from the Universitat Politecnica de Valencia [PAID-01-19].
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Model-based investigation of water adsorption in Achira (Canna edulis K.) biscuits

  • Collazos-Escobar, Gentil Andres|||0000-0002-0659-8897
  • Bon Corbín, José|||0000-0002-0457-9705
  • Carcel, J. A.|||0000-0002-3796-6146
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Gutiérrez-Guzmán, Nelson
  • Váquiro-Herrera, Henry A.
[EN] The water adsorption properties of Achira biscuits were investigated using a mathematical model-based strategy to understand the relationship between water activity and moisture content due to the fact that it is highly relevant for its storage. For this purpose, the water adsorption isotherms of commercial Achira biscuits were firstly experimentally determined by the dynamic dew point (DDI) method at 25, 35, and 45¿°C and ATR¿FTIR spectroscopy was used to detect the functional groups. Secondly, the Guggenheim-Anderson-de Boer (GAB) equation, 4 empirical models (Smith, Oswin, Peleg and DLP), and 5 machine-learning techniques (Regression trees, Random Forest, k-Nearest Neighbors, Artificial Neural Networks and Support Vector Machine) were used to model the isotherms. The fundamentals of water adsorption were analyzed via GAB model parameters, adsorption surface area, spreading pressure, effective pore size, and thermodynamic properties, such as enthalpy-entropy and Gibbs free energy. The experimental results reflected a type III water isotherm and a moderate temperature effect. The GAB model quantified the effect of temperature on the adsorption properties, which reflected a lower degree of hygroscopicity at high temperatures. The Support Vector Machine Learning model provided the best mathematical description of the water adsorption isotherms considering the temperature effect (MRE<3% and R2adj>99%)., This study was supported by the grant, PID2019-106148RRC42, funded by MCIN/AEI/10.13039/501100011033, the PhD grant of Gentil A. Collazos-Escobar, PRE2020-092255, funded by the State Training Subprogram of the State Plan for Scientific and Technical Research and Innovation 2017-2020 and the European Social Fund, and the funding for open access charge: Universitat Politecnica de Valencia.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PEF pre-treatment and ultrasound-assisted drying at different temperatures as a stabilizing method for the up-cycling of kiwifruit: Effect on drying kinetics and final quality

  • Llavata-Cabrero, Beatriz
  • Collazos-Escobar, Gentil Andres|||0000-0002-0659-8897
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] The drying of food by-products, such as kiwifruit discards and surpluses, constitutes an interesting option as a means of stabilizing them for later use. This study assesses the combined influence of the drying temperature (40¿70 °C), pulsed electric field (PEF) pretreatment (0¿5000 V) and ultrasound (US; 0¿50 W) application during the drying of kiwifruit. The increase in temperature, the use of PEF pretreatment or the US application during drying accelerated the process, but it was the combination of the three which led to the highest values of the effective diffusivity and the mass transfer coefficient. Over the range of different conditions studied, the functional and antioxidant properties of dried kiwifruit were not significantly affected, while the color presented some differences, mainly related to the L* and a* coordinates. Therefore, the combination of temperature, PEF and US allowed the processing time to be shortened without significantly affecting the final quality of kiwifruit., This work was supported by the PID2019-106148RRC42 grant funded by MCIN/AEI/10.13039/501100011033, PID2022-136889OB-C22 grant founded by MCIN/AEI/10.13039/501100011033/ERDF a way of making Europe, PhD grant of Beatriz Llavata from the Universitat Politècnica de València (PAID-01-19) and PhD grant of Gentil A. Collazos-Escobar from the State Training Subprogram of the State Plan for Scientific and Technical Research and Innovation 2017-2020, in conjunction with the European Social Fund (PRE2020-092255).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

PEF as pretreatment to ultrasound-assisted convective drying: Influence on quality parameters of orange peel

  • Mello, Ronaldo E.
  • Fontana, Alessia
  • Correa, Jefferson Luiz G.
  • Mulet Pons, Antonio|||0000-0001-6748-2663
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Pulsed electric field (PEF) pretreatments and ultrasound (US) application are techniques previously used to enhance the drying operation, not only increasing the kinetics but improving product quality. Because PEF pretreatments could affect product structure and US influence depends on the internal structure of products, the combination of both techniques could have a synergistic effect. Thus, the influence of the combined application of pulsed electric field (PEF) pretreatments and ultrasound (US) during drying on the color, total phenolic content, ascorbic acid and antioxidant activity of orange peel was studied. To this end, a series of drying experiments (50 degrees C) was performed without and with ultrasound application (20.5 kW/m3) and with and without PEF pretreatments (1.20 kV/cm) for two different times, 200 mu s (0.37 kJ/kg) and 600 mu s (1.12 kJ/kg). Thus, when individually applied, ultrasound significantly shortened the drying time, and PEF pretreatments slightly extended the process. However, the shortest drying time was observed combining 200 mu s PEF pretreatment and ultrasound. This combination also provided the more similar color parameter to the fresh samples and significantly increased the percentage of phenolic compound retention. In addition, every treatment with PEF exhibited a similar percentage of ascorbic acid retention, and only the longer pretreatment (600 mu s) produced a reduction in the antioxidant activity retention. Therefore, the combined use of a PEF pretreatment and ultrasound application during orange peel drying can lead to an interesting way both to shorten the drying process and preserve important compounds., The authors acknowledge the financial support from Agencia Espanola de Investigacion (PID2019-106148RRC42/AEI/10.13039/501100011033) and the Agencia Espanola de Investigacion-ERANET SUSFOOD2 (PCI2018-093161). We are also grateful for the economic support from the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior -Brasil (CAPES) -Finance Code 001, Conselho Nacional de Desenvolvimento Cientifico e Tecnologico (CNPq) and Fundacao de Amparo a Pesquisa de Minas Gerais (FAPEMIG).