Pasar al contenido principal

GEMELOS DIGITALES PARA OPTIMIZAR EL SUPRARRECICLAJE DE RESIDUOS LIGNOCELULOSICOS Y PROTEICOS. MODELIZACION DEL PROCESO

PID2022-136889OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LAS ISLAS BALEARES

Resultados relacionados

Resultados totales (Incluyendo duplicados): 13
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Natural deep eutectic solvent for cellulose isolation from almond shell powder: A sustainable approach for by-product valorization

  • Están, Andrea
  • Umaña, Monica
  • Simal, Susana
  • Ibáñez-Daudén, Adda
[EN] Cellulose was isolated from almond shell through different pretreatments: a conventional 7.5 % NaOH method and a natural deep eutectic solvent method using choline chloride:urea (2:1), both treatments carried out at 80 degrees C for 4 h. A control without pretreatment was also included. All samples underwent subsequent bleachings with NaClO2 (1.3 %, 2 h, 75 degrees C, twice) and with NaOH 10 %:H2O2 6 %:H2O (1:1:100) (1.5 h, 60 degrees C). Pretreatment with ChCl:urea proved to be the most effective, removing up to 90.1 % of lignin and increasing cellulose content from 28.4 to 63.2 g/100 g dry matter. Fourier Transform Infrared Spectroscopy confirmed lignin removal through 1726 and 1125 cm(-)(1) bands attenuation. X-Ray analysis indicated cellulose enrichment up to a 68 % (p < 0.05) in crystallinity. Thermogravimetric analysis revealed improved thermal stability, with degradation onset and peak temperatures between 250 and 271 degrees C and 355-360 degrees C, respectively, due to reduced amorphous content. High whiteness (average 86.7 %) was observed after bleachings. SEM micrographs confirmed cellulose fibrillation accompanied with a decrease in the degree of polymerization. These results highlight the importance of pretreatment for effective delignification and cellulose isolation. ChCl:urea treatment emerged as an efficient option against conventional methods, supporting future strategies for agricultural waste valorization., The authors would like to acknowledge the financial support of the grants PID2022-136889OB-C21 and PID2022-136889OB-C22 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU and the predoctoral grant PREP2022-000377. Moreover, the investigation was also co-funded by the "Direccio General d ' Investigacio, Innovacio i Transformacio Digital del Govern de les Illes Balears" within the framework of "Espai Accelera, Programa Innova UIB-PIMES".The authors would like to acknowledge the financial support of the instrumental agreement for the grant of a transmission electron microscope funded by the Government of the Balearic Islands and co-financed with FEDER resources, "A way of making Europe".We thank M<feminine ordinal indicator> Trinidad Garcia Barcelo, Joan Cifre Bauza and Antonio Busquets Bisbal from the "Serveis Cientificotecnics" of the University of the Balearic Islands for their assistance with gas chromatography, atomic force microscopy, x-ray diffraction and scanning electron microscopy. The authors would also like to thank the laboratory technicians Antoni Capella Ferretjans and Paula Estrada Gonzalez for their valuable assistance with the experimental work.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Enhancing ultrasonic-assisted drying of low-porosity products through pulsed electric field (PEF) pretreatment: The case of butternut squash

  • Llavata-Cabrero, Beatriz
  • Rosselló, C.
  • Quiles Chuliá, Mª Desamparados|||0000-0003-4991-6629
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Ultrasonic-assisted drying is an effective technique for accelerating drying processes, particularly for products with high porosity. The structural changes induced by pulsed electric field (PEF) treatment can make lowporosity products more susceptible to the effects of ultrasound during drying. This study aimed to investigate the influence of PEF treatment on the structure of low-porosity products, such as butternut squash, and to evaluate its effect on ultrasonic-assisted drying. PEF pretreatment altered the physicochemical and microstructural properties of butternut squash. Thus, the higher the energy input, the higher the cell disintegration rate, the lower the shearing force and the lower the water holding capacity. For the same energy input applied, no influence was observed from the different combinations of pulse number and electric field intensity used. The microstructural analysis also showed greater effects with increasing intensity of PEF treatments. All these changes affected the subsequent drying, increasing the drying rate of conventional drying. Moreover, PEF pretreatment enhanced the ultrasound effects when applied during drying, reducing drying time by up to 47% when moderate PEF intensity was used. Therefore, PEF pretreatment under the appropriate conditions could make ultrasound-assisted drying of low-porosity products, such as butternut squash, more feasible., This work was supported by the PID2019-106148RRC42 grants funded by MCIN/AEI/10.13039/501100011033; the PID2022-136889OB-C21 and PID2022-136889OB-C22 grant funded by MCIN/AEI/10.13039/501100011033 and by ERDF/EU, and the PhD grant of Beatriz Llavata from the Universitat Politecnica de Valencia (PAID-01-19).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Influence of Agronomic Practices on the Bioactive Compound Production in Cannabis sativa L.

  • Dalmau, Esperanza
  • Umana, Monica
  • Eim, Valeria
  • Simal, Susana
  • Bon Corbín, José|||0000-0002-0457-9705
[EN] Industrial hemp phytochemistry is shaped by genetics and agronomic management, yet field studies integrating both remain scarce. The combined effects of cultivar, planting density, fertilization, and flowering time on cannabinoids, terpenes, and antioxidants in Cannabis sativa L. were evaluated. A field trial was conducted in Mallorca (2023) using two cultivars (Enectaliana, Enectarol) grown at two densities (Sector 1 approximate to 2.3 plants m-2; Sector 2 approximate to 4.6 plants m-2), with sampling from flowering onset (week 0) to week 5. In Enectaliana, fertilization (with vs. without) was tested. Enectaliana displayed CBD/CBDVA-dominated profiles, whereas Enectarol was CBG-predominant; THC remained consistently low. Effects were assessed via three-way ANOVA (Density x Time x Cultivar; Density x Time x Fertilization). The cultivar and time explained most of the variance, with interactions modulating magnitudes without altering effect hierarchies. Planting density acted as a second-order modulator, modulating concentrations without reversing cultivar rankings. Terpenes peaked early and generally declined as flowering progressed, with cultivar-dependent trajectories. Total phenolics and antioxidant activity (ABTS, FRAP assays) increased steadily until week 5, with density and treatment effects. In Enectaliana, fertilization effects were selective: ABTS values tended to be higher in unfertilized plants at the end of the cycle, FRAP results showed a density interaction, and cannabinoids exhibited non-linear responses to nutrient supply., This research was funded by Spanish research agency (AEI) MICIU/AEI/10.13039/501100011033 (projects PID2022-136889OB-C21 and PID2022-136889OB-C22) and ERDF, EU and BIA 06/21 of Fons de Garantia Agraria i Pesquera de les Illes Balears (FOGAIBA).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Oleuropein extraction from olive leaves assisted by moderate electric fields and high-power ultrasound. A parametric study

  • Khanlar, Malikeh
  • Collazos-Escobar, Gentil Andres|||0000-0002-0659-8897
  • Garcia-Perez, J.V.|||0000-0002-9993-4246
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Moderate electric field (MEF) or power ultrasound (US) are alternative technologies that could enhance conventional extraction processes, increasing yield and quality, shortening processing and reducing energy needs. This study analyses the feasibility of using MEF and US to improve oleuropein extraction from olive leaf. For this purpose, extraction kinetics (distilled water, 50 degrees C) were carried out in different olive leaf/water ratios (OLWR: 1, 5, 10, 15 % w/v), with and without the application of MEF (12.5 V cm(-1)) at different electric frequencies (MEF-FR: 300, 600, 900 and 1200 Hz). Furthermore, the sequential application of MEF and US (3.2 W/L; 21.48 kHz) was also assessed. The experimental extraction kinetics were modelled using Two Terms, Naik and Peleg models. Multi-Factor ANOVAs (p < 0.05) permitted the analysis of the influence of OLWR, MEF-FR and US on the yield. The results showed that the maximum yield (0.016 mg oleuropein/g olive leaf d.m) was found at the lowest OLWR tested (1 % w/v) with MEF application, increasing a 34.2 % the yield of the conventional extraction. As regards the electric frequency, the fastest kinetics and the greatest yield (0.022 mg oleuropein/g olive leaf d.m) were achieved at 300 Hz. The combined application of MEF and US shortened the extraction, finding the maximum yield (0.024 mg oleuropein/g olive leaf d.m) after 10 min instead of the 40 min needed for conventional extraction (0.012 mg oleuropein/g olive leaf d.m), which means an extraction time reduction of 75 %. The modified Peleg model provided the best fit. Therefore, MEF and US significantly improved the efficiency of oleuropein extraction, thus highlighting their potential in extraction processes., This study was supported by the PID2019-106148RRC42 grant with funding provided by MCIN/AEI/10.13039/501,100,011,033 and the PID2022-136889OB-C22 grant funded by MCIN/AEI/10.13039/501,100,011,033/ERDF and by ERDF/EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

3D printing of new foods using cellulose-based gels obtained from Cerotonia siliqua L. byproducts

  • Capella, Antoni
  • Umaña, Mónica
  • Dalmau, Esperanza
  • Femenia, Antoni
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Carob pulp is a valuable source of cellulose-rich fraction (CRF) for many food applications. This study aimed to obtain and characterize a CRF derived from carob pulp waste after sugar removal and to evaluate its potential use in the 3D printing of cellulose-rich foods. Thus, the extraction of the CRF present in carob pulp (by obtaining the alcohol-insoluble residue) was carried out, accounting for nearly 45% dm (dry matter) of this byproduct. The CRF contained about 24% dm of cellulose. The functional properties (swelling capacity, water retention, and fat adsorption) related to this fraction were determined, showing a value of 5.9 mL/g of CRF and 4.0 and 6.5 g/g of CRF, respectively. Different gels were formulated with a total solids content of 15% wm (wet matter), using potato peel flour as a base and partially substituting with CRF (0% to 8% wm). The cellulose-based gels were characterized in terms of viscosity, water distribution (low-field Nuclear Magnetic Resonance), and printability, while the 3D printed samples were assessed for their textural properties. As the percentage of added CRF increased, the viscosity decreased while the water retention increased. Printability improved when small proportions of CRF (2% to 4%) were used, while it deteriorated for higher percentages (6% to 8%). The textural properties (hardness, adhesiveness, cohesiveness, and gumminess) showed significant changes caused by the addition of CRF, with gels containing 3% to 4% CRF exhibiting the most suitable printing values. In summary, this study demonstrates the significant potential of carob cellulose-based gel as an ingredient in the 3D printing of novel fiber-rich foods, contributing to reducing food waste and promoting sustainable practices within the framework of the circular economy., This research was funded by BIA 05/21 of Fons de Garantia Agraria i Pesquera de les Illes Balears (FOGAIBA), and the grant PID2022-136889OB-C21 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Combining pulsed electric fields (PEF) pre-treatment and ultrasound assisted convective drying to obtain coloured potato snacks rich in anthocyanins

  • Santos, K. C.
  • Llavata, Beatriz
  • Augusto, Pedro E. D.
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] This study evaluated the use of pulsed electric field (PEF) technology as a pre-treatment to modify the structure of potato slices, for further addition of anthocyanins. Furthermore, this pre-treatment was combined with ultrasound-assisted convective drying for stabilization, therefore obtaining coloured potato snacks rich in anthocyanins. PEF application affected the potato structure: the more intense the PEF pre-treatment, the higher the cell disintegration index and the lower the cell wall elasticity. The pre-treatments with PEF enhanced the anthocyanin addition by 26-86 %, and the antioxidant capacity of the potato samples by 56-63 %. The added anthocyanins turn the natural colour of potato to reddish tones (increase in a*). The combination of the more intense PEF pre-treatment (1525.5 J/kg) and ultrasound-assisted convective drying (20.5 kW m-3; 21.8 kHz) increased the water effective diffusivity (Deff) by 22 to 46 %. After drying, the retention of anthocyanins in PEF pre-treated and ultrasound-assisted treatment was in the range of 69-100 % and the antioxidant activity was 29-51 %. Furthermore, the antioxidant capacity of those samples was 25-43 % higher than the control. Therefore, the addition of anthocyanins into potatoes was enhanced by PEF pre-treatments, being necessary to find the balance among the processing parameters (pre-treatment and drying) to optimize the bioactive compounds retention in the final product., This work was supported by the Coordination for the Improvement of Higher Education Personnel (CAPES, Brazil) (funding the doctorate of Karoline Costa Santos - 88887.613529/2021-00 and staying at UPV (Spain) - program PrInt 88887.716899/2022-00) ; and by the Grant PID2022-136889OB-C21-22 funded by MICIU/AEI/10.130 39/501100011033 and by ERDF/EU. Communaute Urbaine du Grand Reims, Departement de la Marne, Region Grand Est and European Union (FEDER Champagne-Ardenne 2014-2020, FEDER Grand Est 2021-2027) are acknowledged for their financial support to the Chair of Biotechnology of CentraleSupelec and the Centre Europeen de Biotechnologie et de Bioeconomie (CEBB).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Optimization of multiple linear regression modeling for reducing peroxidase activity in carrots using pulse electric fields

  • Khanlar, Malikeh
  • Simal, Susana
  • Collazos-Escobar, Gentil Andres|||0000-0002-0659-8897
  • Carcel, J. A.|||0000-0002-3796-6146
[EN] Peroxidase enzyme (POD) significantly impacts the processing of fruits and vegetables because it can cause unfavorable color, texture and flavor changes. Pulsed electric field (PEF) treatment is an emerging non-thermal technology that can affect enzyme activity while preserving food quality. This study aimed to model and optimize the PEF processing parameters on POD activity of carrot, specifically the number of pulses, electric field strength, relative orientation of carrot fiber and electric field direction (parallel and perpendicular), and the posttreatment time. The statistical analysis of the experimental data showed that the sample orientation, the posttreatment time, and their interaction with the electric field strength applied significantly affected the reduction of POD activity. The Multiple Linear Regression modelling of the experimental data permitted an accurate description of the influence of process conditions on POD activity and the optimization of the process. Thus, the greater POD reduction was observed after 45 min of a PEF treatment of 12 pulses of 0.6 kV cm-1 with carrot samples' fibers parallel to the electric field direction. This model can be employed to identify the treatment conditions that maximize activity reduction in future studies., This study was supported by the PID2022-136889OB-C21 and PID2022-136889OB-C22 grants funded by MCIN/AEI/10.13039/501100011033/ERDF and by ERDF/EU.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Brewer s Spent Grain as a Source of Proteins and Valuable Polysaccharides

  • Están, Andrea
  • Simal, Susana
  • Eim, Valeria
  • Umaña, Mónica
  • Carcel, J. A.|||0000-0002-3796-6146
  • Ibáñez-Daudén, Adda
[EN] Brewer¿s spent grain (BSG) is an abundant by-product rich in proteins and polysaccharides. This study evaluated ultrasound (US) to enhance alkaline protein extraction in 110 mM NaOHandtoobtain a polysaccharide-enriched residue, with mechanical agitation (AG) as the control. First, 40 min extraction curves were evaluated at 25 and 50 ¿C and fitted to the Weibull model. At 25 ¿C, US increased the 40 min protein yield (40.8 ± 0.1 g/100 g initial protein) by 2.5-fold compared with AG; heating increased AG yield, whereas US showed negligible temperature sensitivity between 25 and 50 ¿C. Subsequently, extractions were performed at 25 ¿C in one or two 20 min cycles using fresh solvent. Extracts were recovered by pH-shift precipitation and freeze-dried. US maximised protein recovery (47.6 ± 0.1 g/100 g initial protein after two cycles) but co-extracted other compounds, reducing purity. AG extracts showed higher emulsifying activity (up to 9.6 ± 0.1 m2·g¿1), while USincreased emulsion stability (up to 46 min). US residues showed up to ~35% lower glucose content than BSG (42 ± 2 g/100 g dry matter for BSG) and higher arabinoxylans (up to 23.5 ± 0.6 g/100 g dry matter; ~2.4-fold BSG), supporting a dual valorisation route based on the production of a protein-rich extract and an arabinoxylans-rich concentrate., This research was funded by grants PID2022 136889OB-C21 and PID2022 136889OBC22 funded by MICIU/AEI/10.13039/501100011033 and by ERDF, EU; and the predoctoral grant PREP2022 000377 funded by MICIU/AEI/10.13039/501100011033 and FSE+.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Optimization of multiple linear regression modeling for reducing peroxidase activity in carrots using pulse electric fields

  • Khanlar, Malikeh
  • Collazos-Escobar, Gentil Andres
  • Simal, Susana
  • Cárcel, Juan A.
[eng] Peroxidase enzyme (POD) significantly impacts the processing of fruits and vegetables because it can causeunfavorable color, texture and flavor changes. Pulsed electric field (PEF) treatment is an emerging non-thermaltechnology that can affect enzyme activity while preserving food quality. This study aimed to model and optimizethe PEF processing parameters on POD activity of carrot, specifically the number of pulses, electric fieldstrength, relative orientation of carrot fiber and electric field direction (parallel and perpendicular), and the posttreatmenttime. The statistical analysis of the experimental data showed that the sample orientation, the posttreatmenttime, and their interaction with the electric field strength applied significantly affected the reductionof POD activity. The Multiple Linear Regression modelling of the experimental data permitted an accuratedescription of the influence of process conditions on POD activity and the optimization of the process. Thus, thegreater POD reduction was observed after 45 min of a PEF treatment of 12 pulses of 0.6 kV cm–1 with carrotsamples’ fibers parallel to the electric field direction. This model can be employed to identify the treatmentconditions that maximize activity reduction in future studies.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Effect of the addition of Chachafruto flour on the stability of oil-in-water emulsions and the physicochemical properties of spray-drying microcapsules

  • Daza, Luis Daniel
  • Umaña, Mónica
  • Eim, Valeria
[eng] This study aimed to assess the suitability of Chachafruto flour (CHF) as a stabilizing agent for an oil-in-water emulsion and its impact on the physicochemical properties of the emulsion after spray drying. Emulsions with varying CHF concentrations (2 %, 3 %, and 4 %) were prepared and compared to a control. The results from the creaming index and particle size (emulsion) analyses indicated that the highest emulsion stability was achieved with 4 %CHF, attributed to its protein content (20.5 %). The encapsulates exhibited spherical and rough surface morphologies but without holes on the surface. Low moisture content (MC < 5 %) and water activity (aw < 0.2) were associated with powder stability. The encapsulates added with CHF showed good reconstitution properties. FTIR confirmed the absence of chemical interactions during the encapsulation process, contributing to the stability. Furthermore, the addition of CHF improved the thermal stability of the encapsulates. This study represents the first investigation on the emulsifying potential of Chachafruto flour.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Influence of Agronomic Practices on the Bioactive CompoundProduction in Cannabis sativa L.

  • Dalmau, E.
  • Umaña, M.
  • Eim, V.
  • Bon, J.
  • Simal, S.
[eng] Industrial hemp phytochemistry is shaped by genetics and agronomic management, yet field studies integrating both remain scarce. The combined effects of cultivar, planting density, fertilization, and flowering time on cannabinoids, terpenes, and antioxidants in Cannabis sativa L. were evaluated. A field trial was conducted in Mallorca (2023) using two cultivars (Enectaliana, Enectarol) grown at two densities (Sector 1 ≈ 2.3 plants m−2 ; Sector 2 ≈ 4.6 plants m−2 ), with sampling from flowering onset (week 0) to week 5. In Enectaliana, fertilization (with vs. without) was tested. Enectaliana displayed CBD/CBDVAdominated profiles, whereas Enectarol was CBG-predominant; THC remained consistently low. Effects were assessed via three-way ANOVA (Density × Time × Cultivar; Density × Time × Fertilization). The cultivar and time explained most of the variance, with interactions modulating magnitudes without altering effect hierarchies. Planting density acted as a second-order modulator, modulating concentrations without reversing cultivar rankings. Terpenes peaked early and generally declined as flowering progressed, with cultivar-dependent trajectories. Total phenolics and antioxidant activity (ABTS, FRAP assays) increased steadily until week 5, with density and treatment effects. In Enectaliana, fertilization effects were selective: ABTS values tended to be higher in unfertilized plants at the end of the cycle, FRAP results showed a density interaction, and cannabinoids exhibited non-linear responses to nutrient supply.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Natural deep eutectic solvent for cellulose isolation from almond shell powder: A sustainable approach for by-product valorization

  • Están, A.
  • Umaña, M.
  • Ibáñez-Daudén, A.
  • Simal, S.
[eng] Cellulose was isolated from almond shell through different pretreatments: a conventional 7.5 % NaOH method and a natural deep eutectic solvent method using choline chloride:urea (2:1), both treatments carried out at 80 ◦C for 4 h. A control without pretreatment was also included. All samples underwent subsequent bleachings with NaClO2 (1.3 %, 2 h, 75 ◦C, twice) and with NaOH 10 %:H2O2 6 %:H2O (1:1:100) (1.5 h, 60 ◦C). Pretreatment with ChCl:urea proved to be the most effective, removing up to 90.1 % of lignin and increasing cellulose content from 28.4 to 63.2 g/100 g dry matter. Fourier Transform Infrared Spectroscopy confirmed lignin removal through 1726 and 1125 cm⁻¹ bands attenuation. X-Ray analysis indicated cellulose enrichment up to a 68 % (p < 0.05) in crystallinity. Thermogravimetric analysis revealed improved thermal stability, with degradation onset and peak temperatures between 250 and 271 ◦C and 355–360 ◦C, respectively, due to reduced amorphous content. High whiteness (average 86.7 %) was observed after bleachings. SEM micrographs confirmed cellulose fibrillation accompanied with a decrease in the degree of polymerization. These results highlight the importance of pretreatment for effective delignification and cellulose isolation. ChCl:urea treatment emerged as an efficient option against conventional methods, supporting future strategies for agricultural waste valorization.
Repositori Institucional UIB
Publicación Artículo científico (JournalArticle)

Cellulose-Rich Polysaccharide Extracts with Gel-Forming Potential and Improved Antioxidant Properties from Stem (Vitis vinifera L.) By-Products: Ultrasound-Assisted Aqueous Extraction and Characterization

  • Comas-Serra, Francesca
  • Eim, Valeria S.
  • Minjares-Fuentes, Rafael
  • Rodríguez-González, Víctor M.
  • Femenia, Antoni
[eng] The valorization of wine by-products aligns with circular bioeconomy principles. This study investigates the ultrasound-assisted aqueous extraction (UAE) of bioactive compounds and cell wall polysaccharides from Syrah grape stems (<em>Vitis vinifera</em> L.) to produce polysaccharide extracts with the intrinsic potential to form cellulose-rich gels with enhanced antioxidant properties. Extractions were performed at three temperatures (10, 20, and 50 °C) and three ultrasonic power densities (120, 206, and 337 W/L), and compared to conventional extraction (CE, 200 rpm). The results demonstrated that UAE significantly accelerated the extraction kinetics for total phenolics (TP), flavonols, and antioxidant capacity (ABTS, FRAP), achieving up to a 3.1-fold increase in TP yield at 20 °C. Notably, UAE at 337 W/L and 20 °C produced antioxidant levels equivalent to those obtained by CE at 50 °C, enabling high efficiency at lower, compound-preserving temperatures. Carbohydrate analysis revealed that the extracts were inherently “cellulose-rich” (glucose ~49–52 mol%), with co-extracted pectins and hemicelluloses constituting a composite polysaccharide matrix with inherent gel-forming capacity, as evidenced by its composition. While total polysaccharide yield was maximized at 10 °C, UAE’s primary effect was the facilitation of extraction and potential structural modification of polymers rather than increasing bulk yield. The process reduced extraction times by 3- to over 6-fold to achieve equivalent bioactive yields compared to CE. This work establishes UAE with water as a process aligned with green chemistry principles, an efficient strategy for the integrated, one-step recovery of antioxidant phenolics and gel-forming polysaccharides from grape stems, transforming this underutilized residue into a multifunctional extract precursor for cellulose-rich hydrogels suitable for food and pharmaceutical applications.