Pasar al contenido principal

FOTOCONVERSION DE CO2 A COMBUSTIBLES MEDIANTE FOTOCATALIZADORES HIBRIDOS (MOF-OXIDO-METAL) INTEGRADOS EN MICRORREACTORES

PID2019-106687RJ-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gold nanoparticles capped with a novel titanium(IV)-containing polyoxomolybdate cluster: Selective and enhanced bactericidal effect against Escherichia coli

  • Paesa, Mónica
  • Almazán, Fernando
  • Yus, Cristina
  • Sebastián, Víctor
  • Arruebo, Manuel
  • Gandía, Luis M.
  • Reinoso, Santiago
  • Pellejero, Ismael
  • Mendoza, Gracia
Bacterial infections are a public health threat of increasing concern in medical care systems; hence, the search for novel strategies to lower the use of antibiotics and their harmful effects becomes imperative. Herein, the antimicrobial performance of four polyoxometalate (POM)-stabilized gold nanoparticles (Au@POM) against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as Gram-negative and Gram-positive bacteria models, respectively, is studied. The bactericidal studies performed, both in planktonic and sessile forms, evidence the antimicrobial potential of these hybrid nanostructures with selectivity toward Gram-negative species. In particular, the Au@GeMoTi composite with the novel [Ti2 (HGeMo7 O28 )2 ]10- POM capping ligand exhibits outstanding bactericidal efficiency with a minimum inhibitory concentration of just 3.12 µm for the E. coli strain, thus outperforming the other three Au@POM counterparts. GeMoTi represents the fourth example of a water-soluble TiIV -containing polyoxomolybdate, and among them, the first sandwich-type structure having heteroatoms in high-oxidation state. The evaluation of the bactericidal mechanisms of action points to the cell membrane hyperpolarization, disruption, and subsequent nucleotide leakage and the low cytotoxicity exerted on five different cell lines at antimicrobial doses demonstrates the antibiotic-like character. These studies highlight the successful design and development of a new POM-based nanomaterial able to eradicate Gram-negative bacteria without damaging mammalian cells., The authors thank the following institutions for the financial support to carry out this research: Spanish Ministerio de Ciencia e Innovación, Spanish Agencia Estatal de Investigación, and FEDER “una manera de hacer Europa” (grant numbers PID2020-113987RB-I00, PDC2021-121405-I00, PID2019-106687RJ-I00, and PID2021-127265OB-C21); Gobierno de Navarra (grant number PC091-092 FOREST2+). CIBER-BBN is an initiative funded by the VI National R&D&i Plan 2008–2011 financed by the Instituto de Salud Carlos III with the assistance of the European Regional Development Fund. M.P. acknowledges the support from Gobierno de Aragón (Orden CUS/581/2020). G.M. gratefully acknowledges the support from the Miguel Servet Program (MS19/00092; Instituto de Salud Carlos III)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

UiO-66 MOF-Derived Ru@ZrO2 catalysts for photo-thermal CO2 hydrogenation

  • Almazán, Fernando
  • Lafuente, Marta
  • Echarte, Amaya
  • Imizcoz, Mikel
  • Pellejero, Ismael
  • Gandía, Luis M.
This article belongs to the Special Issue Heterogeneous Catalysis — A Themed Issue in Honor of Prof. Dr. Avelino Corma., The use of metal–organic frameworks (MOFs) as templates or precursors in the manufacture of heterogeneous catalysts is highly attractive due to the transfer of MOFs’ inherent porosity and homogeneous metallic distribution to the derived structure. Herein, we report on the preparation of MOF-derived Ru@ZrO2 catalysts by controlled thermal treatment of zirconium-based MOF UiO-66 with ruthenium moieties. Ru3+ (3 or 10 mol%) precursor was added to UiO-66 synthesis and, subsequently, the as-synthesized hybrid structure was calcined in flowing air at different temperatures (400–600 °C) to obtain ZrO2-derived oxides doped with highly dispersed Ru metallic clusters. The materials were tested for the catalytic photo-thermal conversion of CO2 to CH4. Methanation experiments were conducted in a continuous flow (feed flow rate of 5 sccm and 1:4 CO2 to H2 molar ratio) reactor at temperatures from 80 to 300 °C. Ru0.10@ZrO2 catalyst calcined at 600 °C was able to hydrogenate CO2 to CH4 with production rates up to 65 mmolCH4·gcat.–1·h–1, CH4 yield of 80% and nearly 100% selectivity at 300 °C. The effect of the illumination was investigated with this catalyst using a high-power visible LED. A CO2 conversion enhancement from 18% to 38% was measured when 24 sun of visible LED radiation was applied, mainly due to the increase in the temperature as a result of the efficient absorption of the radiation received. MOF-derived Ru@ZrO2 catalysts have resulted to be noticeably active materials for the photo-thermal hydrogenation of CO2 for the purpose of the production of carbon-neutral methane. A remarkable effect of the ZrO2 crystalline phase on the CH4 selectivity has been found, with monoclinic zirconia being much more selective to CH4 than its cubic allotrope., Financial support was obtained from Spanish Agencia Estatal de Investigación and Spanish Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033/ and FEDER “Una manera de hacer Europa” (grants PID2019-106687RJ-I00/AEI/ 10.13039/501100011033 and PID2021-127265OB-C21), as well as from Plan de Recuperación, Transformación y Resiliencia and NextGenerationEU (grants PLEC2022-009221 and TED2021-130846B-100), which is gratefully acknowledged. M.L. and M.I. thank Spanish Ministerio de Universidades and Unión Europea-NextGenerationEU for the postdoctoral ¨Margarita Salas¨ and FPU 18/01877 grants, respectively. A.E. thanks Universidad Pública de Navarra for the predoctoral fellowship. L.M.G. thanks the Banco de Santander and Universidad Pública de Navarra for their financial support under “Programa de Intensificación de la Investigación 2018” initiative., Peer reviewed
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

UiO-66 MOF-Derived Ru@ZrO2 Catalysts for Photo-Thermal CO2 Hydrogenation

  • Almazán, Fernando
  • Lafuente, Marta
  • Echarte, Amaya
  • Imizcoz, Mikel
  • Pellejero, Ismael
  • Gandía, Luis M.
The use of metal–organic frameworks (MOFs) as templates or precursors in the manufacture of heterogeneous catalysts is highly attractive due to the transfer of MOFs’ inherent porosity and homogeneous metallic distribution to the derived structure. Herein, we report on the preparation of MOF-derived Ru@ZrO2 catalysts by controlled thermal treatment of zirconium-based MOF UiO-66 with ruthenium moieties. Ru3+ (3 or 10 mol%) precursor was added to UiO-66 synthesis and, subsequently, the as-synthesized hybrid structure was calcined in flowing air at different temperatures (400–600 °C) to obtain ZrO2-derived oxides doped with highly dispersed Ru metallic clusters. The materials were tested for the catalytic photo-thermal conversion of CO2 to CH4. Methanation experiments were conducted in a continuous flow (feed flow rate of 5 sccm and 1:4 CO2 to H2 molar ratio) reactor at temperatures from 80 to 300 °C. Ru0.10@ZrO2 catalyst calcined at 600 °C was able to hydrogenate CO2 to CH4 with production rates up to 65 mmolCH4·gcat.–1·h–1, CH4 yield of 80% and nearly 100% selectivity at 300 °C. The effect of the illumination was investigated with this catalyst using a high-power visible LED. A CO2 conversion enhancement from 18% to 38% was measured when 24 sun of visible LED radiation was applied, mainly due to the increase in the temperature as a result of the efficient absorption of the radiation received. MOF-derived Ru@ZrO2 catalysts have resulted to be noticeably active materials for the photo-thermal hydrogenation of CO2 for the purpose of the production of carbon-neutral methane. A remarkable effect of the ZrO2 crystalline phase on the CH4 selectivity has been found, with monoclinic zirconia being much more selective to CH4 than its cubic allotrope.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Gold Nanoparticles Capped with a Novel Titanium(IV)-Containing Polyoxomolybdate Cluster: Selective and Enhanced Bactericidal Effect Against <i>Escherichia coli</i>

  • Paesa, Mónica
  • Almazán, Fernando
  • Yus, Cristina
  • Sebastián, Víctor
  • Arruebo, Manuel
  • Gandía, Luis M.
  • Reinoso, Santiago
  • Pellejero, Ismael
  • Mendoza, Gracia
Bacterial infections are a public health threat of increasing concern in medical care systems; hence, the search for novel strategies to lower the use of antibiotics and their harmful effects becomes imperative. Herein, the antimicrobial performance of four polyoxometalate (POM)‐stabilized gold nanoparticles (Au@POM) against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as Gram‐negative and Gram‐positive bacteria models, respectively, is studied. The bactericidal studies performed, both in planktonic and sessile forms, evidence the antimicrobial potential of these hybrid nanostructures with selectivity toward Gram‐negative species. In particular, the Au@GeMoTi composite with the novel [Ti2(HGeMo7O28)2]10– POM capping ligand exhibits outstanding bactericidal efficiency with a minimum inhibitory concentration of just 3.12 µm for the E. coli strain, thus outperforming the other three Au@POM counterparts. GeMoTi represents the fourth example of a water‐soluble TiIV‐containing polyoxomolybdate, and among them, the first sandwich‐type structure having heteroatoms in high‐oxidation state. The evaluation of the bactericidal mechanisms of action points to the cell membrane hyperpolarization, disruption, and subsequent nucleotide leakage and the low cytotoxicity exerted on five different cell lines at antimicrobial doses demonstrates the antibiotic‐like character. These studies highlight the successful design and development of a new POM‐based nanomaterial able to eradicate Gram‐negative bacteria without damaging mammalian cells.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

High power illumination system for uniform, isotropic and real time controlled irradiance in photoactivated processes research

  • Sáenz Gamasa, Carlos
  • Hernández Salueña, Begoña
  • Sanz Carrillo, Diego
  • Pellejero, Ismael
  • Gandía Pascual, Luis
In the study of photocatalytic and photoactivated processes and devices a tight control on the illumination conditions is mandatory. The practical challenges in the determination of the necessary photonic quantities pose serious difficulties in the characterization of catalytic performance and reactor designs and configurations, compromising an effective comparison between different experiments. To overcome these limitations, we have designed and constructed a new illumination system based in the concept of the integrating sphere (IS). The system provides uniform and isotropic illumination on the sample, either in batch or continuous flow modes, being these characteristics independent of the sample geometry. It allows direct, non-contact and real time determination of the photonic quantities as well as versatile control on the irradiance values and its spectral characteristics. It can be also scaled up to admit samples of different sizes without affecting its operational behaviour. The performance of the IS system has been determined in comparison with a second illumination system, mounted on an optical bench, that provides quasi-parallel beam (QPB) nearly uniform illumination in tightly controlled conditions. System performance is studied using three sample geometries: a standard quartz cuvette, a thin straight tube and a microreactor by means of potassium ferrioxalate actinometry. Results indicate that the illumination geometry and the angular distribution of the incoming light greatly affect the absorption at the sample. The sample light absorption efficiency can be obtained with statistical uncertainties of about 3% and in very good agreement with theoretical estimations., Authors thank the financial support from the Spanish Agencia Estatal de Investigación and Spanish Ministerio de Ciencia e Innovación, MCIN/AEI/ 10.13039/501100011033/ and FEDER 'Una manera de hacer Europa', grants PID2019-106687RJ-I00 and PID2021-127265OB-C21, and Gobierno de Navarra, grant PC091-092 FOREST2+. L.M.G. thanks Banco de Santander and UPNA for their financial support under 'Programa de Intensificación de la Investigación 2018' initiative.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Tesis doctoral (DoctoralThesis)

Estudio de sistemas foto-termocatalíticos para la hidrogenación de CO2 con energía solar, Photo-tehermocatalytic systems for the hydrogenation of CO2 with solar energy

  • Imizcoz Aramburu, Mikel
En el contexto actual de crisis climática producida por las elevadas emisiones de CO2 antropogénico, la vía de la catálisis fototérmica explorada en este trabajo posibilita la producción limpia de metano neutro en emisiones de carbono, por medio de la reacción de Sabatier, utilizando la luz solar como fuente de energía e hidrógeno de origen renovable. De este modo, hemos preparado materiales consistentes en nanopartículas de rutenio y níquel (metales activos para la metanación de CO2 por vía térmica) soportadas sobre diferentes óxidos metálicos, los hemos caracterizado por diferentes técnicas y hemos evaluado su actividad foto-termocatalítica bajo iluminación con luz artificial. Una parte fundamental del trabajo la hemos centrado en tratar de estudiar de manera diferenciada los procesos fotoquímicos y termoquímicos producidos en los catalizadores iluminados durante la reacción, lo cual es fundamental para futuros desarrollos orientados a aprovechar al máximo el espectro de la radiación solar. Así mismo, hemos llevado a cabo la validación de estos catalizadores en condiciones relevantes de reacción con luz solar real concentrada mediante la adaptación del reactor empleado en el laboratorio. Por último, hemos explorado nuevas vías para la preparación de catalizadores multimetálicos en un solo paso a partir de la pirólisis/calcinación de MOFs, así como el diseño y fabricación de microrreactores como posible tecnología para la intensificación de la producción de metano solar a una escala superior a la de laboratorio. En el capítulo 1 ofrecemos una introducción general sobre las estrategias de actuación para paliar la crisis climática actual, las tecnologías de captura, almacenamiento y utilización de CO2 y la reacción de Sabatier como proceso clave en la obtención de combustibles solares. En el capítulo 2 se describen los principales objetivos del trabajo. En el capítulo 3 abordamos la preparación y caracterización de catalizadores de rutenio soportado sobre óxidos metálicos y comparamos los efectos del método de preparación y del soporte empleado en la actividad catalítica de los materiales para la reacción de Sabatier asistida por luz solar simulada. En el capítulo 4 incluimos una serie de estudios sobre la actividad fototermocatalítica de los mismos catalizadores a los que se refiere el capítulo III, que tiene como objetivo último analizar de forma desacoplada los procesos fotoquímicos y termoquímicos que tienen lugar al iluminar los materiales durante la reacción. En el capítulo 5 recogemos el estudio de los mismos catalizadores a los que se refiere en el capítulo III en condiciones relevantes de reacción, empleando la luz como única fuente de energía. En este capítulo incluimos el estudio realizado bajo luz solar real concentrada. En el capítulo 6 mostramos la preparación y caracterización de catalizadores de níquel soportado sobre TiO2 y estudiamos el efecto del método de preparación asistida con borohidruro sódico en la actividad catalítica de los materiales para la reacción de Sabatier por las vías termocatalítica y foto-termocatalítica. En el capítulo 7 exploramos el empleo de MOFs como soportes de nanopartículas de rutenio y como precursores para la preparación de catalizadores a partir de tratamientos térmicos de pirólisis o calcinación. En el capítulo 8 mostramos el trabajo realizado en la puesta a punto del sistema de reacción y el reactor catalítico y exploramos el diseño y fabricación de microrreactores. En el capítulo 9 recogemos las conclusiones generales de esta tesis y las líneas de trabajo futuro propuestas., Ayuda para la Formación de Profesorado Universitario (FPU) (Ref. FPU18/01877) del Ministerio de Ciencia, Innovación y Universidades y Ayuda de Movilidad Predoctoral Internacional del Gobierno de Navarra (Res. 84E/2022). Financiación parcial de las investigaciones a través de los siguientes proyectos de investigación: AEI –Ministerio de Ciencia e Innovación (PID2021-127265OB-C21); AEI – Ministerio de Ciencia e Innovación (PLEC2022-009221); Gobierno de Navarra – Departamento de Universidad, Innovación y Transformación Digital (PC091-092 FOREST2+); AEI – Ministerio de Ciencia e Innovación (PID2019-106687RJ-I00)., Programa de Doctorado en Ciencias y Tecnologías Industriales (RD 99/2011), Industria Zientzietako eta Teknologietako Doktoretza Programa (ED 99/2011)
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Assessing thermal and nonthermal contributions during CO2 hydrogenation over ruthenium catalysts: effects of the illumination conditions and the nature of the support

  • Imizcoz Aramburu, Mikel
  • Pellejero, Ismael
  • Gandía Pascual, Luis
Photothermal catalysis offers a promising approach for the clean production of carbon-neutral chemicals from CO2 through reactions with hydrogen as a renewable energy carrier. While the combined action of photons and heat from solar radiation can drive catalytic reactions, the interactions involved are very complex, depend on the catalyst composition, and often remain uncertain. Herein, we assessed the thermal and nonthermal contributions to the overall activities of a series of Ru catalysts during the photothermal hydrogenation of CO2. TiO2 (anatase/rutile mixture), anatase, ZrO2, CeO2, and SiO2 were used as supports for Ru nanoparticles (2 wt%) that were deposited using an amino-acid-assisted method. Ru@TiO2 and Ru@ZrO2 presented the best catalytic performance at relatively low reaction temperatures (220-250 °C), whereas Ru@CeO2 was the most active catalyst above 300 °C. The catalysts were tested under direct and indirect illumination conditions to assess their thermal and nonthermal contributions to the overall production of methane, with a nonthermal contribution of 60-75 % observed at the highest applied irradiance (2.2 W·cm-²). Ru@ZrO2 registered the highest nonthermal CH4 production, which is tentatively ascribable to the participation of photo-generated electrons in the catalytic reaction and the light-induced formation of oxygen vacancies. The selected catalysts were also tested under concentrated-sunlight conditions in outdoor experiments, with a maximum methane production of 200 mmolCH4·gcat-¹·h-¹ achieved over Ru@ZrO2, which resulted in 31 % CO2 conversion and 92 % selectivity for methane in a continuous flow reactor at a space velocity of 1500 mLSTP·g-¹·min-¹., Financial support from the Spanish Ministerio de Ciencia e Innovación and Spanish Agencia Estatal de Investigación (grants PID2019-106687RJ-I00, PID2021-127265OB-C21, PLEC2022-009221 and Beca FPU 18/01877) and from Gobierno de Navarra (PC091-092 FOREST2+) is gratefully acknowledged. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Development of a flow microreactor with immobilized catechol-1,2-dioxygenase for the biocatalytic production of cis,cis-muconic acid

  • Rosso, Samuele
  • Almazán, Fernando
  • Pellejero, Ismael
  • Gandía Pascual, Luis
  • Dezzani, Sabrina
  • Barbieri, Lisa
  • Gilardi, Gianfranco
  • Valetti, Francesca
  • Di Nardo, Giovanna
A low cost microreactor was developed by stable immobilization of catechol-1,2-dioxygenase for the flow biocatalysis of catechol to produce cis,cis-muconic acid, a direct precursor of industrially relevant adipic acid. The microreactors of polydimethylsiloxane were manufactured with different designs by straightforward, cost- effective soft lithography techniques, and were tested with different immobilization strategies focused on preserving enzyme catalytic activity and stability over time. The best immobilization strategy was covalent immobilization by amino-silanization followed by glutaraldehyde linker grafting. The biocatalytic activity of the immobilized enzyme was assessed by measuring muconic acid production through the flow of 50 µM catechol at room temperature. Catechol conversion rates of up to 95 % were achieved over a 5-hour period, and volumes of up to 180 mL were processed using only 0.32 nmol of immobilized protein, resulting in the production of 1.33 mg⋅L 1⋅h 1. This work demonstrates the feasibility of using microreactor-based flow biocatalysis for sustainable muconic acid production and highlights its promising application at industrial scale., Financial support from University of Turin “GRANT for INTERNATIONALIZATION - GFI 2022” and the Spanish Ministerio de Ciencia e Innovación and Spanish Agencia Estatal de Investigación (grants PID2019–106687RJ-I00, PID2021–127265OB-C21) is gratefully acknowledged. Open access funding provided by University of Torino.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

The 3D-printing fabrication of multichannel silicone microreactors for catalytic applications

  • Ibáñez de Garayo Quilchano, Alejandro
  • Imizcoz Aramburu, Mikel
  • Maisterra Udi, Maitane
  • Almazán, Fernando
  • Sanz Carrillo, Diego
  • Bimbela Serrano, Fernando
  • Cornejo Ibergallartu, Alfonso
  • Pellejero, Ismael
  • Gandía Pascual, Luis
Microstructured reactors (MSRs) are especially indicated for highly demanding heterogeneous catalysis due to the small channel dimensions that minimize diffusional limitations and enhance mass and heat transport between the fluid and the catalyst. Herein, we present the fabrication protocol of the fused filament 3D printing of silicone monolithic microreactors based on a multichannel design. Microchannels of 200 to 800 µm in width and up to 20 mm in length were developed following the scaffold-removal procedure using acrylonitrile butadiene styrene (ABS) as the material for the 3D-printed scaffold fabrication, polydimethylsiloxane (PDMS) as the building material, and acetone as the ABS removing agent. The main printing parameters such as temperature and printing velocity were optimized in order to minimize the bridging effect and filament collapsing and intercrossing. Heterogeneous catalysts were incorporated into the microchannel walls during fabrication, thus avoiding further post-processing steps. The nanoparticulated catalyst was deposited on ABS scaffolds through dip coating and transferred to the microchannel walls during the PDMS pouring step and subsequent scaffold removal. Two different designs of the silicone monolithic microreactors were tested for four catalytic applications, namely liquid-phase 2-nitrophenol photohydrogenation and methylene blue photodegradation in aqueous media, lignin depolymerization in ethanol, and gas-phase CO2 hydrogenation, in order to investigate the microreactor performance under different reaction conditions (temperature and solvent) and establish the possible range of applications., Financial support was received from Spanish Agencia Estatal de Investigación and Spanish Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033/ and FEDER “Una manera de hacer Europa” (grants PID2019-106687RJ-I00/AEI/10.13039/501100011033 and PID2021-127265OB-C21) as well as from Plan de Recuperación, Transformación y Resiliencia and NextGenerationEU (grants PLEC2022-009221 and TED2021-130846B-100), and Gobierno de Navarra grant PC091-092 FOREST2+ which are gratefully acknowledged. The Spanish Ministerio de Universidades fellowship FPU 18/01877 was granted to M.I. The Universidad Pública de Navarra predoctoral fellowship was granted to M.M. L.M. Gandía thanks Banco de Santander and Universidad Pública de Navarra for their financial support under the “Programa de Intensificación de la Investigación 2018” initiative.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Three-dimensional printing of acrylonitrile butadiene styrene microreactors for photocatalytic applications

  • Cabrera Barrios, Aarón
  • Pellejero, Ismael
  • Oroz Mateo, Tamara
  • Salazar, Cristina
  • Navajas León, Alberto
  • Fernandez Acevedo, Claudio
  • Gandía Pascual, Luis
Miniaturization is a key aspect for many technological applications and the use of microreactors is an excellent solution for the intensification of chemical processes for a variety of applications. However, standard microfabrication requires large facilities and intricate fabrication protocols, and consequently it is not easily available, generally resulting in high production costs. Herein, we present a very cheap, fast and easy microreactor design for photocatalytic applications based on direct fused filament 3D printing as a facilitating and widespread technology. The microreactor consists of three bodies directly printed in ABS (Acrylonitrile Butadiene Styrene): a main body with a serpentine microchannel pattern where the photocatalyst is placed, a top holder with a transparent polymer window, and a base to clamp the parts. Several microreactor units were coated with TiO2 doped with Cu (2.4 wt.%) nanoparticles synthesized by FSP (Flame Spray Pyrolysis) and tested for the photocatalytic degradation of two water pollutants showing excellent performance., Financial support from Gobierno de Navarra (grant PC003-004), Spanish Ministerio de Ciencia, Innovacion y Universidades, the European Regional Development Fund (ERDF/FEDER) (grant RTI2018-096294-B-C31) and Agencia Estatal de Investigación (grant PID2019-106687RJ-I00/AEI/10.13039/501100011033) is gratefully acknowledged. I.P. thanks Obra Social la Caixa, Fundacion Caja Navarra, and UPNA for their research contracts in the framework of the program 'Captacion del Talento 2019'. L.M.G. wishes to thank Banco de Santander and Universidad Publica de Navarra for their financial support under the 'Programa de Intensificación de la Investigación 2018' initiative.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

UiO-66 MOF-Derived Ru@ZrO2 catalysts for photo-thermal CO2 hydrogenation

  • Almazán, Fernando
  • Lafuente Adiego, Marta
  • Echarte Villeras, Amaya
  • Imizcoz Aramburu, Mikel
  • Pellejero, Ismael
  • Gandía Pascual, Luis
The use of metal–organic frameworks (MOFs) as templates or precursors in the manufacture of heterogeneous catalysts is highly attractive due to the transfer of MOFs’ inherent porosity and homogeneous metallic distribution to the derived structure. Herein, we report on the preparation of MOF-derived Ru@ZrO2 catalysts by controlled thermal treatment of zirconium-based MOF UiO66 with ruthenium moieties. Ru3+ (3 or 10 mol%) precursor was added to UiO-66 synthesis and, subsequently, the as-synthesized hybrid structure was calcined in flowing air at different temperatures (400–600 ◦C) to obtain ZrO2 -derived oxides doped with highly dispersed Ru metallic clusters. The materials were tested for the catalytic photo-thermal conversion of CO2 to CH4 . Methanation experiments were conducted in a continuous flow (feed flow rate of 5 sccm and 1:4 CO2 to H2 molar ratio) reactor at temperatures from 80 to 300 ◦C. Ru0.10@ZrO2 catalyst calcined at 600 ◦C was able to hydrogenate CO2 to CH4 with production rates up to 65 mmolCH4·gcat. –1 ·h –1, CH4 yield of 80% and nearly 100% selectivity at 300 ◦C. The effect of the illumination was investigated with this catalyst using a high-power visible LED. A CO2 conversion enhancement from 18% to 38% was measured when 24 sun of visible LED radiation was applied, mainly due to the increase in the temperature as a result of the efficient absorption of the radiation received. MOF-derived Ru@ZrO2 catalysts have resulted to be noticeably active materials for the photo-thermal hydrogenation of CO2 for the purpose of the production of carbon-neutral methane. A remarkable effect of the ZrO2 crystalline phase on the CH4 selectivity has been found, with monoclinic zirconia being much more selective to CH4 than its cubic allotrope., Financial support was obtained from Spanish Agencia Estatal de Investigación and Spanish Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033/ and FEDER “Una manera de hacer Europa” (grants PID2019-106687RJ-I00/AEI/ 10.13039/501100011033 and PID2021-127265OB-C21), as well as from Plan de Recuperación, Transformación y Resiliencia and NextGenerationEU (grants PLEC2022-009221 and TED2021-130846B-100), which is gratefully acknowledged. M.L. and M.I. thank Spanish Ministerio de Universidades and Unión Europea-NextGenerationEU for the postdoctoral ¨Margarita Salas¨ and FPU 18/01877 grants, respectively. A.E. thanks Universidad Pública de Navarra for the predoctoral fellowship. L.M.G. thanks the Banco de Santander and Universidad Pública de Navarra for their financial support under “Programa de Intensificación de la Investigación 2018” initiative.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Gold nanoparticles capped with a novel titanium(iv)-containing polyoxomolybdate cluster: selective and enhanced bactericidal effect against Escherichia coli

  • Paesa, Mónica
  • Almazán, Fernando
  • Yus Argón, Cristina
  • Sebastián, Víctor
  • Arruebo Gordo, Manuel
  • Reinoso, Santiago
  • Pellejero, Ismael
  • Gandía Pascual, Luis
  • Mendoza, Gracia
Bacterial infections are a public health threat of increasing concern in medical care systems; hence, the search for novel strategies to lower the use of antibiotics and their harmful effects becomes imperative. Herein, the antimicrobial performance of four polyoxometalate (POM)-stabilized gold nanoparticles (Au@POM) against Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus) as Gram-negative and Gram-positive bacteria models, respectively, is studied. The bactericidal studies performed, both in planktonic and sessile forms, evidence the antimicrobial potential of these hybrid nanostructures with selectivity toward Gram-negative species. In particular, the Au@GeMoTi composite with the novel [Ti2(HGeMo7O28)2]10¿ POM capping ligand exhibits outstanding bactericidal efficiency with a minimum inhibitory concentration of just 3.12 µm for the E. coli strain, thus outperforming the other three Au@POM counterparts. GeMoTi represents the fourth example of a water-soluble TiIV-containing polyoxomolybdate, and among them, the first sandwich-type structure having heteroatoms in high-oxidation state. The evaluation of the bactericidal mechanisms of action points to the cell membrane hyperpolarization, disruption, and subsequent nucleotide leakage and the low cytotoxicity exerted on five different cell lines at antimicrobial doses demonstrates the antibiotic-like character. These studies highlight the successful design and development of a new POM-based nanomaterial able to eradicate Gram-negative bacteria without damaging mammalian cells., The authors thank the following institutions for the financial support to carry out this research: Spanish Ministerio de Ciencia e Innovación,Spanish Agencia Estatal de Investigación, and FEDER “una manera dehacer Europa” (grant numbers PID2020-113987RB-I00, PDC2021-121405-I00, PID2019-106687RJ-I00, and PID2021-127265OB-C21); Gobierno de Navarra (grant number PC091-092 FOREST2+). CIBER-BBN is an initia-tive funded by the VI National R&D&i Plan 2008–2011 financed by the In-stituto de Salud Carlos III with the assistance of the European Regional Development Fund. M.P. acknowledges the support from Gobierno de Aragón (Orden CUS/581/2020). G.M. gratefully acknowledges the sup-port from the Miguel Servet Program (MS19/00092; Instituto de SaludCarlos III). Open access funding is provided by Universidad Pública de Navarra.