Pasar al contenido principal

CARACTERIZACION QUIMICA DE POLIMEROS RECICLABLES Y BIOPOLIMEROS Y SUS ADITIVOS (CHEMPLAS)

PID2019-108857RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDADE DA CORUÑA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Towards standard methods for the classification of aquatic toxicity for biologically active household chemicals (BAHC) present in plastics, pharmaceuticals, and cosmetic products

  • Beiras Garcia Sabell, Ricardo
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, A standard method to test the aquatic toxicity of biologically active household chemicals (BAHC), including those with very low water solubility, is proposed. The method uses the common marine models Paracentrotus lividus embryos and Acartia clausi larvae, in order to advance towards derivation of water quality criteria for these emerging pollutants that currently lack environmental standards. Depending on the water solubility and octanol–water partition coefficient (Kow) of the substance, the protocol consists of testing the toxicity of the substances by serial dilutions of water stocks, dimethyl-sulfoxide stocks, or 100 mg/L lixiviates in seawater. When this method is applied to eleven model BAHC, the pharmaceutical fluoxetine, the antioxidant butylated hydroxytoluene, and the UV filters broadly present in cosmetics octocrylene and 4-methylbenzylidene camphor, are classified as very toxic to aquatic life, since their EC50 values are < 1 mg/L. In general, both biological models, P. lividus and A. clausi, yield the same classification of the substances tested, but variations in the classification of aquatic toxicity depending on methodological aspects are discussed. The use of A. clausi nauplii provides more protecting value to the toxicity parameters obtained by using this protocol., Ministerio de Economía, Industria y Competitividad | Ref. CTM2016-77945-C3, Agencia Estatal de Investigación | Ref. PID2019-108857RB-C3, Xunta de Galicia | Ref. ED431C 2017/46
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Biodegradation assessment tests of biopolymers in standardised water: different sources of variability

  • Gutierrez Rial, David
  • Villar Comesaña, Iria
  • Feijoo Abal, Maria Del Pilar
  • Soto González, Benedicto
  • Garrido González, Josefa
  • Mato de la Iglesia, Salustiano
This study assessed the ultimate biodegradation degree of two resins, polyhydroxybutyrate and polylactic acid (PHB and PLA), and three commercial biobased bags (BMAT, BGREEN, and BBEIGE) through the measurement of oxygen consumption in closed respirometers. Activated sludge from a wastewater treatment plant (WWTP) was used as the inoculum, cellulose was used as the reference material, and five trials were conducted with two different devices under identical conditions, with a 28-day incubation period. The results revealed statistically significant differences in the biochemical oxygen demand (BOD) measurements for cellulose, PHB, and PLA between the two devices and within the same devices across different trials. The degree of biodegradation (Dt), calculated as the percentage of theoretical oxygen demand (ThOD), varied depending on the device and trial. For cellulose, Dt ranged from 61 to 93%; for PLA, the maximum Dt was 6%; and for PHB, Dt oscillated between 16 and 72%. These findings highlight the critical importance of carefully selecting the testing equipment, as it significantly influences biodegradation results, in addition to the already known interlaboratory variability caused by the inoculum, Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2019-108857RB-C3, Agencia Estatal de Investigación | Ref. TED2021-131278B-C21
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

A Green Approach for the Automatic Quantitative Analysis of Additives in Plastic Samples Using In-Tube Extraction Dynamic Headspace Sampling Technique Coupled to GC-MS/MS

  • Concha-Graña, Estefanía
  • Moscoso Pérez, Carmen María
  • Fernández-González, V.
  • López-Mahía, P.
  • Muniategui, Soledad
[Abstract] Background: Many of the chemicals frequently used as additives have been recognised as hazardous substances, and therefore their analysis is necessary to evaluate plastic contamination risk. Additives analysis in plastic samples is usually performed by methods involving high volumes of toxic solvents or having high detection limits. In this work, a novel, fast, solventless and reliable green method was developed for the automated analysis of plastic additives from plastic samples. The proposed method consists of in-tube extraction dynamic headspace sampling (ITEX-DHS) combined with gas chromatography (GC) and mass spectrometry (MS/MS) determination. Results: Several parameters affecting the ITEX-DHS extraction of 47 additives in plastic samples (including phthalates, bisphenols, adipates, citrates, benzophenones, organophosphorus compounds, among others) were optimised. The use of matrix-matched calibration, together with labelled surrogate standards, minimises matrix effects, resulting in recoveries between 70 and 128%, with good quantitation limits (below 0.1 μg g−1 for most compounds) and precision (<20%). The method proposed can be applied to any type of polymer, but due to the existence of the matrix effect, calibrates with the adequate matrix should be performed for each polymer. Significance: This method represents an effective improvement compared to previous methods because it is fast, solvent-free, fully automated, and provides reliable quantification of additives in plastic samples., This work was supported by the Spanish Inter-Ministerial Science and Technology Commission and by the European Union through the European Regional Development Fund (ERDF) under the JPI_Oceans 2019 MicroplastiX (PCI2020-112145), the Spanish Ministry of Science and Innovation through the RISBIOPLAS project (CHEMPLAS, PID2019-108857RB-C3/AEI/10.13039/501100011033), and European Union H2020 under the LABPLAS project (Grant H2020- 101003954). Financial support is also acknowledged from the Program of Consolidation and Structuring of Units of Competitive Investigation of the University System of Galicia (Xunta de Galicia) potentially co-financed by ERDF in the frame of the operative Program of Galicia 2021–2024 (reference: ED431C 2021/56), Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Adsorption of Pesticides and Personal Care Products on Pristine and Weathered Microplastics in the Marine Environment. Comparison Between Bio-Based and Conventional Plastics

  • Concha-Graña, Estefanía
  • Moscoso Pérez, Carmen María
  • López-Mahía, P.
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] The hydrophobicity of persistent organic pollutants (POPs) makes them adsorb on microplastics in the marine environment, affecting their distribution, persistence, or their transfer to the trophic chain. Fragrances and non-polar pesticides can be adsorbed by microplastics in the marine environment because of their physico-chemical characteristics. In this work, the adsorption of two pesticides (α-endosulfan and chlorpyrifos) and 6 musk fragrances (musk xylene, musk ketone, musk moskene, galaxolide, tonalide, and celestolide) on polyamide (PA6) (a petroleum based polymer) and on polyhydroxybutyrate (PHB) (biopolymer) in seawater was studied, considering also the effect of water temperature and plastic weathering. Results show higher adsorption of the selected pollutants for PHB than PA, being PA more affected by the water temperature and the plastic weathering. The highest percentage of adsorption was achieved in most cases at 24 h. In addition, this process was irreversible, as it showed the leaching assays. Besides, this work revealed that plastics mitigate the degradation of α-endosulfan in aquatic media (hydrolysis), showing that plastics can act as inhibitors of degradation of POPs, increasing its persistence in the environment., This work was supported by the Spanish Inter-Ministerial Science and Technology Commission and by the European Union through the European Regional Development Fund (ERDF) through the ARPA-ACUA (CTM2016-77945-C3-3-R) project, and JPI_Oceans 2019 MicroplastiX (PCI2020-112145) and RISBIOPLAS (CHEMPLAS, PID2019-108857RB-C3/AEI/10.13039/501100011033) projects, financed by the Spanish Ministery of Science and Innovation. Financial support is also acknowledged by the Program of Consolidation and Structuring of Units of Competitive Investigation of the University System of Galicia (Xunta de Galicia) potentially co-financed by ERDF in the frame of the operative Program of Galicia 2021–2024 (reference: ED431C 2021/56). Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Impact of Weathering on the Chemical Identification of Microplastics From Usual Packaging Polymers in the Marine Environment

  • Fernández-González, V.
  • Andrade-Garda, José Manuel
  • López-Mahía, P.
  • Muniategui, Soledad
[Abstract] Most of the plastics produced worldwide are finally disposed into the environment, most of them being one-use plastic packaging. Once released, plastics may undergone degradation through several agents, such as solar radiation, mechanical forces, and microbial action. Weathered plastics and microplastics (MPs) collected from the marine environment show considerable physical and chemical differences regarding their pristine counterparts; most notably on their surface, where spectrometric measurements are done. Hence, it is crucial to consider aging for their correct identification and quantification in environmental monitoring. Five of the most common polymers employed worldwide for packaging (LDPE, HDPE, PS, PP and PET) were weathered in a pilot-scale system simulating dry and marine conditions for more than 10 weeks. Aliquots were withdrawn periodically to monitor their weathering processes by means of infrared spectrometry and scanning electron microscopy; their spectra were compared and band ratios calculated. Results showed that an individual study of each polymer is necessary since degradation pathways and products depend on the polymer type. Moreover, including spectra of weathered polymers in the spectral libraries to obtain reliable identifications in microplastics pollution studies was critical., This work was supported through the JPI-Oceans BASEMAN project, by the Spanish Ministry of Economy and Competitiveness -partially financed by the European Regional Development Fund program- (PCIN-2015-170-C02-01), JPI_Oceans 2019 MicroplastiX project (PCI2020-112145) by the Spanish Ministry of Science and Innovation. and RISBIOPLAS project (CHEMPLAS, PID2019-108857RB-C3/AEI/10.13039/501100011033), by the Spanish Ministry of Science and Innovation. The Program ‘Consolidación e Estructuración de Unidades de Investigación Competitiva’ of the Galician Government (Xunta de Galicia) is also acknowledged (ED431C 2017/28), Xunta de Galicia; ED431C 2017/28
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Ultra-Trace Mercury Determination in Seawater After Vortex-Assisted Liquid-Liquid Micro-Extraction

  • Conchado Amado, Paula
  • Sánchez-Piñero, Joel
  • Moreda-Piñeiro, Jorge
  • Turnes-Carou, Isabel
  • López-Mahía, P.
  • Muniategui, Soledad
[Abstract] In the present study, an analytical methodology based on a vortex-assisted liquid-liquid micro-extraction (VALLME) was developed for extraction and enrichment technique of total mercury (Hg) from seawater after derivatisation with ammonium pyrrolidine dithiocarbamate (APDC), while Hg quantitation was performed by atomic absorption spectrometry (AAS) using a Direct Mercury Analyser DMA-80 spectrometer based on thermal desorption. Variables affecting Hg derivatisation (including pH and APDC concentration) and VALLME extraction (comprising extraction (vortex) time, acceptor solvent (hexane) volume and ionic strength of donor phase) were explored. Enrichment factor (EF) and extraction recovery (ER) of 51 and 76 ± 5.3% were obtained from only 20 mL of seawater (at pH = 3) when using an APDC concentration of 0.125 mmol/L, and vortex time and acceptor solution volume of 4 min and 300 μL, respectively; whereas NaCl addition had no effect on Hg determination. The VALLME-AAS method has been high sensitive (quantification limit, QL = 10.3 ng L−1) and precise (with relative standard deviations, RSDs of <14%). The developed procedure has been tested by analysing different sea water (NASS-7) and estuarine water (SLEW-3 and BCR-505) certified reference materials. Finally, Hg levels between 34 and 172 ng L−1 have been assessed in several seawater samples at A Coruña bay., Financial support by the Program of Consolidation and Structuring of Units of Competitive Investigation of the University System of Galicia (Xunta de Galicia) (reference: ED431C 2021/56) potentially co-financed by ERDF-Ministerio de Economía y Empresa (MINECO) (UNLC15-DE-3097, financed together (80/20 %) with the Xunta de Galicia); by European Union (project reference: Grant H2020- 101003954); by Ministerio de Ciencia e Innovación (project references: PID2019- 108857RB-C31/AEI/10.13039/501100011033 and PCI2020-112145). Joel Sánchez-Piñero acknowledges the Xunta de Galicia (Consellería de Cultura, Educación e Universidade) for a posdoctoral grant (ED481B-2022-002), Xunta de Galicia; ED431C 2021/56, Xunta de Galicia; ED481B-2022-002
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Development of a Dispersive Liquid–Liquid Microextraction Method for the Determination of Plastic Additives in Seawater

  • González-Castro, María-José
  • Uribe-Ares, Jaime
  • Muniategui, Soledad
  • Beceiro-González, Elisa
[Abstract] A method using dispersive liquid–liquid microextraction (DLLME) prior to high performance liquid chromatography-diode array detection (HPLC-DAD) was developed to determine seven additives from the plastics industry (butylated hydroxytoluene, diisodecyl phthalate, irgafos 168, lawsone, quercetin, triclosan and vitamin E) in seawater samples. These compounds can reach seawater due to direct discharge from wastewater treatment plants and leaching from plastics and microplastics. The extraction was performed using 25 mL of seawater, 500 μL of 1-octanol (extraction solvent) and a stirring step instead of dispersive solvent. Additive concentrations were determined by LC-DAD on a C18 column with a mobile phase of acetonitrile and phosphoric acid aqueous solution (pH 3.5) by gradient elution. The analytical recoveries ranged from 82 to 93% for all compounds, except for lawsone (60%). Repeatability and intermediate precision were adequate with RSD < calculated values following the Horwitz equation at the concentration levels evaluated (0.06 and 0.24 mg L−1). All additives exhibited linear matrix calibration curves (R2 > 0.99). Detection limits ranged from 0.009 to 0.028 mg L−1 and quantification limits ranged from 0.027 to 0.084 mg L−1. Finally, the application of the method to real samples verified the method as accurate and applicable to seawater., The authors acknowledge the financial support of the “Xunta de Galicia” (Project GRC ED431C 2021/56 potentially cofunded by the European Regional Development Fund) and the Spanish Ministry of Science and Innovation (Project PID2019-108857RB-C31), Xunta de Galicia; ED431C 2021/56
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Phthalates, Organotin Compounds and Per-Polyfluoroalkyl Substances in Semiconfined Areas of the Spanish Coast: Occurrence, Sources and Risk Assessment

  • Concha-Graña, Estefanía
  • Moscoso Pérez, Carmen María
  • Fernández-González, V.
  • López-Mahía, P.
  • Gago, Jesús
  • León, Víctor M.
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] In this work two sensitive areas of the Spanish coast located in the Atlantic (Ria de Vigo) and Mediterranean (Mar Menor lagoon) have been studied regarding their contamination by phthalates, organotin compounds and per-polyfluoroalkyl substances (seawater and sediments) in two different campaigns (spring and autumn in 2015). PFAS and OTCs were detected in seawater and sediments at low concentrations (few ng L−1 or ng g−1), whereas PAEs were detected at levels two orders of magnitude higher, particularly in Mar Menor lagoon due to its semi-confined characteristics. However, PAEs and OTCs concentration in sediments were higher in Ría de Vigo than in Mar Menor lagoon as a consequence of the influence of the important urban nuclei and port in that area. The ecological risk assessment revealed that in both areas tributyltin, dibutyltin and diethylphthalate pose a significant risk in sediments, whereas in seawater tributyltin in both areas resulted in a high risk., This work was supported by the Spanish Inter-Ministerial Science and Technology Commission and by the European Union through the European Regional Development Fund (ERDF) through the IMPACTA (CTM2013-48194-C3-1-R and CTM2013-48194-C3-2-R), ARPA-ACUA (CTM2016-77945-C3-3-R), PLAS-MED (CTM2017-89701-C3-3R) projects, and JPI_Oceans 2019 MicroplastiX (PCI2020-112145) and RISBIOPLAS (CHEMPLAS, PID2019-108857RB-C3/AEI/10.13039/501100011033) projects, financed by the Spanish Ministry of Science and Innovation. Financial support is also acknowledged to the Program of Consolidation and Structuring of Units of Competitive Investigation of the University System of Galicia (Xunta de Galicia) potentially co-financed by ERDF in the frame of the operative Program of Galicia 2017-2020 (reference: ED431C 2017/28). Authors are grateful to the technical staff of the Oceanographic Centers of Vigo and Murcia (IEO), for assistance in sampling and sample treatment, Xunta de Galicia; ED431C 2017/28
RUC. Repositorio da Universidade da Coruña
Publicación Artículo científico (JournalArticle)

Misidentification of PVC Microplastics in Marine Environmental Samples

  • Fernández-González, V.
  • Andrade-Garda, José Manuel
  • López-Mahía, P.
  • Muniategui, Soledad
Financiado para publicación en acceso aberto: Universidade da Coruña/CISUG, [Abstract] Poly(vinylchloride), PVC, is the third most demanded polymer in Europe although its presence in marine ecosystems, surprisingly, is scarcely observed. This does not reflect neither its production nor its widespread usage. Therefore, it is imperative to understand why this may happen. PVC is the least stable of the high-tonnage produced polymers as it has the highest sensitivity towards UV radiation and, therefore, photo-degradation is of maximum relevance. The big amount of additives included in PVC formulations, weathering and the different treatments required to isolate it from environmental samples can modify the surface of PVC microplastics, making their spectral identification/quantification an analytical challenge. All these factors can lead to large PVC underestimations in environmental studies, in which other polymers like PE, PP or PS outstand. Further, the fact that the infrared spectrum of weathered PVC can be confounded with that of PE is of most relevance and, therefore, remarkable misidentifications and/or wrong quantifications may occur. In this work some relevant factors that can explain the low percentages of PVC reported in the literature are discussed and special emphasis is made on the need for suitable spectroscopic databases that include PVC weathered standards. This has been confirmed by the results of a detailed study of PVC weathering under pilot-scale conditions, monitoring its spectroscopic and physical changes over time., This work is part of the project MicroplastiX (Grant PCI2020-112145) supported by the JPI_Oceans Program and by MCIN/AEI/10.13039/501100011033 and the European Union “Next Generation EU”/PRTR”; by the LAnd-Based solutions for PLAStics in the Sea (LABPLAS) Grant H2020- 101003954 and “ChemPlas” Project supported by the Agencia Estatal de Investigación (Grant PID2019-108857RB-C31/AEI/10.13039/501100011033). The Program ‘Consolidación e Estructuración de Unidades de Investigación Competitivas” of the Galician Government (Xunta de Galicia) is also acknowledged (Grant ED431C 2021/56). Funding for open access charge: Universidade da Coruña/CISUG, Xunta de Galicia; ED431C 2021/56
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Vitellogenin gene expression in marine mussels exposed to ethinylestradiol: No induction at the transcriptional level

  • Fernández González, Laura Emilia
  • Sánchez-Marín, Paula
  • Gestal, C.
  • Beiras, Ricardo
  • Diz, Ángel P.
12 pages, 4 figures, 3 tables.-- Under a Creative Commons license, Vitellogenin (Vtg), a large multidomain protein precursor of egg-yolk proteins, is used as an endocrine disruption biomarker in fish, and in the last decades, its use has been extended to invertebrates like mollusks. However, it remains unclear whether invertebrate endocrine system produces Vtg in response to estrogens, like it occurs in oviparous vertebrates. In a previous study, no evidence of induction of Vtg expression at protein level was found in gonads of the marine mussel Mytilus galloprovincialis after exposure to the estrogenic chemical 17α-ethinylestradiol (EE2). In the present follow-up study, it was investigated whether there is any effect of EE2 on Vtg abundance at transcriptional level in M. galloprovincialis gonads. To this aim, RT-qPCR analysis targeting three different domains of Vtg transcript was performed on gonads of mussels that were exposed either 4 or 24 days to 100 ng/L EE2. In addition, several reference genes were analysed and a selection of these for potential use in further RT-qPCR analyses on mussel male and female gonads is provided. Results showed higher expression in females than in males for the three analysed Vtg domains, and no evidence of Vtg mRNA induction due to EE2 either in females or males. The present results, together with those obtained from previous analysis at protein level, support that Vtg is not an adequate biomarker for xenoestrogenicity in marine mussels. Additionally, nucleotide sequences of Vtg transcripts of three closely-related species from Mytilus edulis complex (M. galloprovincialis, M. edulis and M. trossulus) are provided and compared with Vtg sequences from other mollusk species to assess the level of conservation and evolutionary relationships among species, This work was funded by the Spanish Government (MINECO and AEI; Gobierno de España, Ministerio de Ciencia e Innovación codes AGL2014-52062-R, PID2019-107611RB-I00, PCIN-2015-187-C03-03, PID2019-108857RB-C3, and CTM2016-77945-C3), Fondos Feder (ERDF, European commission), Xunta de Galicia (“Grupos de Referencia Competitiva” ED431C 2020/05 and ED431C 2017/46, “Grupos con Potencial de Crecemento” IN607B 2018/10 and “Centro Singular de Investigación de Galicia” accreditation 2019–2022), Peer reviewed