Pasar al contenido principal

GENERACION DE DAÑO Y MODELADO PROBABILISTA

PID2019-110928RB-C31

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CASTILLA-LA MANCHA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Autogenous self-healing induced by compressive fatigue in self-compacting steel-fiber reinforced concrete

  • De La Rosa, A.
  • Ortega, J.J.
  • Ruiz, Gonzalo
  • García Calvo, José Luis
  • Rubiano, Francisco
  • Castillo Talavera, Ángel
We study the application of fatigue loads as an activation agent of the self-healing mechanism of concrete. This can lead to improvements in the strength of the material, contrary to the idea that cyclic loads can only generate damage. A fiber-reinforced concrete was produced and characterized under compressive fatigue. The strength of runout specimens, which resisted from a minimum of 165000 cycles until more than a million, showed a mean increase of 23%. Microstructure analyses were performed to confirm this increment as the result of a self-healing process, including X-ray Diffraction, Thermogravimetric and Differential Thermal Analyses, Back Scattering Electron Microscopy, and Mercury Intrusion Porosimetry. Results show the presence of new hydration products and a reduction of porosity, which explain the improvement of the concrete capacity. As a mechanical result, the relationship between strain rate and fatigue life is found to be unique for every fatigue stress level., The authors gratefully acknowledge the financial support from the Ministerio de Ciencia e Innovación, Spain , through grants PID2019–110928RB–C31 and RTC–2017–6736–3 , and from the Junta de Comunidades de Castilla-La Mancha, Spain , through grant SBPLY/19/180501/ 000220 . All authors have read and agreed to the revised version of the manuscript., No
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Experimental study on quasi-static mixed mode fracture in self-compacting concrete with longitudinal reinforcement and steel fibers

  • Rosa, Ángel De La
  • Ruiz, Gonzalo
  • Moreno, Rodrigo
This study investigates the mixed-mode fracture behavior of self-compacting concrete specimens reinforced with longitudinal steel bars and steel fibers. The experimental program involved three-point bending tests on asymmetrically notched prismatic specimens designed to induce and propagate mixed-mode cracks. The influence of different steel fiber dosages on crack initiation, propagation, and final failure was evaluated. Key findings reveal that the addition of steel fibers significantly enhances energy absorption and ductility under combined mode I and mode II fracture conditions. The results demonstrate the effectiveness of steel fibers in delaying brittle failure and improving the overall structural performance. Novelty lies in the combined use of self-compacting concrete and steel fibers to explore mixed-mode fracture mechanisms in reinforced elements., This research received funding from the Universidad de Castilla-La Mancha, Spain, and the Fondo Europeo de Desarrollo Regional through grant 2022–GRIN–34124, and from the Ministerio de Ciencia e Innovación, Spain , through grants PID2019–110928RB–C31 and PID2021–124521OB–I00., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Innovative Mix Design Methodologies for Self-Compacting Lime Concrete Toward Sustainable Construction

  • De La Rosa, Ángel
  • Ruiz, Gonzalo
  • Moreno, Rodrigo
This study presents innovative methodologies for designing self-compacting lime concrete to address the current gap in tailored mix design approaches for this type of concrete. The primary objective was to develop self-compacting lime concrete with compressive strengths exceeding 10 MPa, aiming for target strengths above 20 MPa and approaching 25 MPa for structural use. Natural hydraulic lime (NHL-5) was used as the primary binder, with limestone powder as a mineral addition and a superplasticizer to ensure self-compactability. River sand served as the fine aggregate, while different types of coarse aggregates with varied size, nature, and morphology were incorporated. Fresh state properties of the self-compacting lime concrete mixes were evaluated immediately after mixing, while mechanical properties were tested after 28 days of curing in a humid chamber, including compressive strength, modulus of elasticity, Poisson’s ratio, flexural strength, and specific fracture energy. Results demonstrated high performance in both self-compactability and mechanical strength, exceeding initial expectations due to an optimized mix design methodology and a comprehensive understanding of raw material properties. This methodology offers a promising pathway for producing self-compacting lime concrete, providing a sustainable alternative in construction applications., This research received funding from the Universidad de Castilla-La Mancha, Spain, and the Fondo Europeo de Desarrollo Regional through grant 2022–GRIN–34124, and from the Ministerio de Ciencia e Innovación, Spain, through grants PID2019–110928RB–C31, PID2021–124521OB–I00, and PID2023-147971OB-C31., Peer reviewed
Repositorio Institucional de la Universidad de Burgos (RIUBU)
Publicación Artículo científico (JournalArticle)

Size effect of steel fiber–reinforced concrete cylinders under compressive fatigue loading: Influence of the mesostructure

  • González Cabrera, Dorys Carmen
  • Mena Alonso, Álvaro
  • Ruiz, Gonzalo
  • Ortega Parreño, José Joaquín
  • Poveda, Elisa
  • Mínguez Algarra, Jesús
  • Yu, Rena C.
  • Rosa, Ángel de la
  • Vicente Cabrera, Miguel Ángel
This study deals with the influence of the fiber concrete mesostructure on the size effect under compressive fatigue loading. For this purpose, three series of cylindrical specimens of steel fiber–reinforced concrete were fabricated. Before fatigue testing, all the cylinders were scanned and the main morphological, orientation, and distribution parameters of the pores and fibers were checked. The images reveal that, near the cylinders’ walls, the porosity is lower than that in the cores and is even lower for large sizes. Additionally, larger specimens are more vulnerable to compressive fatigue loading, resulting in a reduction in fatigue life., The authors are grateful for the financial support from the Ministerio de Economía y Competitividad, Spain with grant nos. PID2019-110928RBC32, PID2019–110928RB–C31, and RTC–2017–6736–3, and from the Junta de Comunidades de Castilla-La Mancha, Spain through grant no. SBPLY/19/180501/000220.