Pasar al contenido principal

DISEÑO MULTIESCALA DE ALEACIONES DE MAGNESIO CON ALTA RESISTENCIA Y DUCTILIDAD PARA TRANSPORTE SOSTENIBLE

PID2019-111285RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2019
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario FUNDACIÓN IMDEA MATERIALES

Resultados relacionados

Resultados totales (Incluyendo duplicados): 7
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Anomalous twin boundary formation in magnesium alloys by rapid solidification

  • Jin, X.
  • Barro Guizán, Óscar
  • Riveiro Rodríguez, Antonio
  • Pou Saracho, Juan María
  • Pérez Prado, M.T.
The aim of this work is to investigate the formation of an anomalously high fraction of twin boundaries (TBs) during laser directed energy deposition (DED) of a Mg-3Al-1 Zn (wt.%) alloy. With that goal, single tracks are deposited using different combinations of scan speed and powder feed rate. The melt pool dimensions are related to the DED parameters. Irrespective of the processing conditions, the resulting microstructures are always formed by fine grains with a very weak texture. However, some DED parameter combinations give rise to a fraction of TBs that is significantly higher than that corresponding to a random texture. These TBs are characterized by an irregular morphology and by the presence of segregated atoms, solute clusters, and nanoparticles. Additionally,the lattice in the vicinity of the TBs is highly distorted and contains a high population of stacking faults. All these characteristics set them apart from conventional tensile TBs, which exhibit a large degree of coherency and limited segregation. Rapid solidification is thus presented here as a novel avenue to design TBs with unique properties in Mg alloys. This work paves the way for future studies on grain boundary design via additive manufacturing methods, a field that is still in its infancy., Xunta de Galicia | Ref. ED431C 2023/25, Agencia Estatal de Investigación | Ref. PID2019-111285RB-I00
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Atomic scale interactions of basal dislocations and twin boundaries with ultrathin precipitates in magnesium alloys

  • Shi, D.F.
  • Wang, C.Y.
  • Cepeda-Jiménez, C.M.
  • Pérez Prado, María Teresa
The aim of this work is to investigate the interaction of basal dislocations and twin boundaries with ul- trafine basal disk-shaped precipitates at the atomic scale in the peak-aged Mg-1Mn-1Nd-3Zn (wt.%) alloy. With that goal, an experimental approach consisting on micropillar compression of two grains oriented favorably for basal slip and for tensile twin activation, respectively, as well as high resolution transmis- sion electron microscopy, was put in place. First, a novel mechanism of interaction between particles and basal dislocations was observed. In particular, the movement of dislocations along basal planes led to the dissolution of the ultrathin basal precipitates in the nearby regions (within 80 nm) and to solute diffusion resulting in microsegregation of solutes at the slip lines. Hindering of basal slip due to such microsegre- gation prevented slip localization by promoting the consecutive activation of softer basal planes. Second, twin-precipitate interactions were found to be dependent on the twin boundary plane. In particular, by- passing of precipitates by coherent twin boundary segments were observed to lead to elastic rotations of the precipitate lattice, while the interaction of CTB/prismatic-basal intersections with precipitates re- sulted in precipitate shearing along prismatic planes., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities under project PID2019–111285RB-I00. DFS acknowledges the financial support from the China Scholarship Council (Grant No 201706050154). CYW thanks National Natural Science Foundation of China (Grant No. 52001258) for support.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The relation between ductility at high temperature and solid solution in Mg alloys

  • Cepeda-Jiménez, C.M.
  • Shi, D.F.
  • Pérez Prado, María Teresa
This work investigates the effect of solid solution on ductility and on the activation of individual deformation mechanisms at moderate temperatures and at quasi-static strain rates in Mg-Zn and Mg-Al alloys. With that aim, four solid solution Mg-Zn and Mg-Al binary alloy ingots containing 1 and 2 wt.% solute atoms were subjected to hot rolling and subsequent annealing to generate polycrystals with similar average grain size and basal-type texture for each composition. The activity of the different slip systems after tensile testing at 150°C and at 250°C was evaluated in pure Mg and in the alloys by EBSD-assisted slip trace analysis. In addition, segregation of Zn and Al atoms at grain boundaries during the thermo-mechanical processing was characterized by HAADF-STEM and EDX. It was found that while the addition of Al and Zn atoms to pure Mg does not lead to major changes in the mechanical strength at the investigated temperatures, it does enhance ductility significantly, especially at 250°C. Our results show that this increase in ductility cannot be attributed to a higher activation of non-basal systems in the alloys, as reported earlier, as the incidence of non-basal systems is indeed considerably higher in pure Mg. This work suggests, on the contrary, that the ductility increase may be attributed to the presence of a more homogenous basal activity in the alloys due to a lower degree of orientation clustering, to grain boundary solute segregation, and to a higher slip diffusivity at grain interiors., The research leading to these results has received funding from the Madrid region under programme S2018/NMT-4381-MAT4.0-CM project. Funding from projects PID2019-111285RB-I00 and PID2020-118626RB-I00 awarded by the Spanish Ministry of Science, Innovation and Universities, is also acknowledged. DFS acknowledges the financial support from the China Scholarship Council (Grant no 201706050154).
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An Al-5Fe-6Cr alloy with outstanding high temperature mechanical behavior by laser powder bed fusion

  • Pérez Prado, María Teresa
  • Martín Jiménez, Ángela
  • Shi, D.F.
  • Milenkovic, Srdjan
  • Cepeda-Jiménez, C.M.
This research aims to study the laser powder bed fusion (L-PBF) processability, the microstructure and the tensile mechanical properties of an AlFeCr alloy at a wide range of temperatures. With this goal, Al-5Fe-6Cr (wt%) pre-alloyed powder was produced by casting and gas atomization. The microstructure of the as-atomized powders and the as-built specimens was characterized via scanning electron microscopy, x-ray diffraction, and transmission electron microscopy. Following a parameter optimization study, dense as-built specimens with a high relative density of 99.8% and a Vickers hardness at room temperature of 192 HV were fabricated. In addition, the newly developed AlFeCr alloy exhibits yield strength values of 273 ± 5 MPa and 179 ± 3 MPa at 300ºC and 400ºC, respectively. The exceptional strength of this alloy at high temperature is attributed to the homogeneous precipitation during processing of large density of nanoscale icosahedral (i-phase) and intermetallic phases, which are endowed with high thermal stability. These values are significantly higher than those corresponding to the conventional wrought Al7075 aluminum alloy in the T6 condition and to all Al alloys manufactured by L-PBF to date. The current research sheds guidelines for the design of high strength aluminum alloys containing transition alloying elements that are suitable to be processed by L-PBF for high temperature structural applications in a cost effective way., The authors wish to acknowledge financial support from the European Union’s Horizon 2020 Clean Sky 2 program (contract No 755610, project AlForAMA). DFS acknowledges the financial support from the China Scholarship Council (Grant no 201706050154). Funding from projects PID2019-111285RB-I00 and PID2020-118626RB-I00 awarded by MCIN/AEI/10.13039/501100011033 is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of the Zr content on the processability of a high strength Al-Zn-Mg-Cu-Zr alloy by laser powder bed fusion

  • Martín Jiménez, Ángela
  • Vilanova, M.
  • San Sebastián, María
  • Wang, C.Y.
  • Milenkovic, Srdjan
  • Pérez Prado, María Teresa
  • Cepeda-Jiménez, C.M.
The objective of this research is to study the effect of the Zr on the L-PBF processability, microstructure, and microhardness of an AlZnMgCu-Zr alloy. Two AlZnMgCu-0.5 and 1.5 wt% Zr pre-alloyed powders were produced by casting followed by gas atomization. In addition, an excess of Mg and Zn was added to the target compositions to compensate for vaporization during L-PBF. The as-atomized powders and the as-built and heat treated specimens were characterized via scanning electron microscopy, electron backscatter diffraction, and transmission electron microscopy. Crack-free samples with a relative density of 99.0 ± 0.1% were obtained in the alloy containing 1.5 wt%Zr. The as-built microstructure of this alloy consisted of small equiaxed grains without preferred grain orientation near the melt pool boundary and slightly columnar grains between adjacent melt pools. After a solution and aging heat treatment (T6), the newly developed AlZnMgCu-1.5Zr alloy has an outstanding Vickers micro-hardness of 223 ± 3 HV, which is significantly higher than that of the wrought Al7075-T6 aluminum alloy. This excellent mechanical behavior is attributed to the presence of large AlZr nucleant particles of up to 500 nm in size that inhibit grain growth during solidification and the subsequent heat treatment, and of a high density of nanoscale second phases (MgZn and AlZr) located within the aged α-Al grains., The authors wish to acknowledge financial support from the European Union's Horizon 2020 Clean Sky 2 program (contract No 755610, project AlForAMA). Leonardo Aircraft is also thanked for its support as topic manager. CYW acknowledges funding from the Fundamental Research Funds for the Central Universities in China (grant number 3102019QD0415). Funding from projects PID2019-111285RB-I00 and PID2020-118626RB-I00 awarded by MCIN/AEI/10.13039/501100011033 is also acknowledged.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Activation of second-order <c+a> pyramidal slip and other secondary mechanisms in solid solution Mg-Zn alloys and their effect on tensile ductility

  • Cepeda-Jiménez, C.M.
  • Shi, D.F.
  • Ma, A.
  • Pérez Prado, María Teresa
This work investigates the strain-dependent activation of second-order <c+a> pyramidal slip and other non-basal systems with increasing tensile strain in a Mg-Zn alloy. With that purpose, a polycrystalline solid solution Mg-Zn alloy with ∼2 wt.% Zn (∼0.75 at. %) and with an average grain size of ∼36 μm was processed by casting, hot rolling and subsequent annealing. The slip activity with tensile strain was analyzed by electron backscattered diffraction (EBSD)-assisted slip trace analysis. Basal slip was found to be the dominant deformation mechanism at low strains (∼5-10%). However, at higher strains the activity of pyramidal slip increases significantly due to the hardening of basal slip by Zn solutes. Other non-basal deformation mechanisms, such as compression twinning, cross-slip and slip transfer between pyramidal planes, come into play also at higher strains and are shown to be induced by pyramidal slip. Molecular dynamics (MD) simulations have been used, in particular, to demonstrate the influence of pyramidal dislocations on the nucleation of compression twins. The large availability of deformation mechanisms at high strains contributes to improve the RT ductility of the Mg-Zn alloy., The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities under project PID2019-111285RB-I00 and PID2020-118626RB-I00, European Union Horizon 2020 research and innovation programme (Marie Sklodowska-Curie Individual Fellowships, Grant Agreement 795658) and the Comunidad de Madrid Talento-Mod1 programme (Grant Agreement PR-00096). DFS acknowledges the financial support from the China Scholarship Council (Grant no 201706050154)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Machine learning dislocation density correlations and solute effects in Mg-based alloys

  • Salmenjoki, H.
  • Papanikolaou, Stefanos
  • Shi, D.F.
  • Tourret, D.
  • Cepeda-Jiménez, C.M.
  • Pérez Prado, María Teresa
  • Laurson, L.
  • Alava, M. J.
Magnesium alloys, among the lightest structural materials, represent excellent candidates for lightweight applications. However, industrial applications remain limited due to relatively low strength and ductility. Solid solution alloying has been shown to enhance Mg ductility and formability at relatively low concentrations. Zn solutes are significantly cost effective and common. However, the intrinsic mechanisms by which the addition of solutes leads to ductility improvement remain controversial. Here, by using a high throughput analysis of intragranular characteristics through data science approaches, we study the evolution of dislocation density in polycrystalline Mg and also, Mg–Zn alloys. We apply machine learning techniques in comparing electron back-scatter diffraction (EBSD) images of the samples before/after alloying and before/after deformation to extract the strain history of individual grains, and to predict the dislocation density level after alloying and after deformation. Our results are promising given that moderate predictions (coefficient of determination R ranging from 0.25 to 0.32) are achieved already with a relatively small dataset (∼ 5000 sub-millimeter grains)., HS acknowledges the support from Finnish Foundation for Technology Promotion. MA and SP acknowledge support from the European Union Horizon 2020 research and innovation programme under grant agreement No 857470 and from European Regional Development Fund via Foundation for Polish Science International Research Agenda PLUS programme grant No MAB PLUS/2018/8. LL acknowledges the support of the Academy of Finland via the Academy Project COPLAST (Project no. 322405). DT gratefully acknowledges support from the Spanish Ministry of Science through a Ramon y Cajal Fellowship (Ref. RYC2019-028233-I). CMCJ acknowledges the financial support from the Spanish Ministry of Science, Innovation and Universities under project PID2020-118626RB-I00. The research leading to these results has received funding from the Spanish Ministry of Science, Innovation and Universities under project PID2019-111285RB-I00.