Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 40
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Electric field as a useful tool to improve the poor adsorption affinity of pollutants on carbonaceous aerogel pellets

  • Puga Pazo, Antón
  • Meijide Fernandez, Jessica
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, The removal of ionisable drugs (fluoxetine, sulfamethizole and antipyrine) from aqueous solution was performed by conventional adsorption using carbonaceous aerogel pellets as adsorbents. Although >96 % elimination was achieved for sulfamethizole and antipyrine after 1440 min, only 2.5 % fluoxetine was removed. In a multicomponent system, the presence of these three drugs in the solution leads to a fivefold depletion of the adsorbed total mass. Thus, the authors proposed to influence the traditional adsorption process by an electric field to improve the low affinity of fluoxetine to the aerogel. Specifically, the electrosorptive removal of fluoxetine was investigated by applying different voltages between 0.8 and 1.3 V, with the maximum adsorption achieved at 1.2 V. The application of an electric field increases the affinity of the contaminants to aerogel pellets. After demonstrating the applicability of the electrosorption in the removal of fluoxetine, the effect of the water matrix on the process was analysed. For this purpose, the removal of these ionisable drugs was evaluated using real wastewater, specifically, raw wastewater and wastewater after primary and tertiary treatment from a municipal wastewater treatment plant. As expected, pollutant removal was somewhat lower due to the complexity of the water matrix. Total percent removal of all pollutants was achieved using only the effluent treated water as the matrix due to minimal competitive adsorption. Finally, the Microtox® test confirmed the excellent ability of this approach to remove these pharmaceuticals, resulting in luminescence inhibition that decreased by 60–80 % depending on the water matrix compared to the polluted influent., Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PID2020-113667 GB-I00, Xunta de Galicia | Ref. ED431C 2021-43, Xunta de Galicia | Ref. ED481B 2018/096
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Screening of agroindustry residues for their usage as oxygen evolution reaction catalysts

  • Díez Sarabia, Aida Maria
  • Bolaños Vázquez, María
  • Chiussi , Stefano
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
The Oxygen Evolution Reaction (OER) is the limiting step of the water splitting process for the attainment of valuable hydrogen. A green and economic catalyst is hereby synthesized to reduce the OER overpotential. For the first time, a set of representative agroindustry residues were used and subjected to pyrolytic and hydrothermal treatments, fitting them into circular economy. Hydrothermally treated potato peels (PP-HC), particularly, reached 10, 50 and 100 mA/cm2 at overpotentials of 353, 408 and 431 mV, respectively. The novel material showed good electron-transfer and small Tafel slope (52.2±0.2 mV/dec) that is explained by the presence of electronic rich bonds as confirmed by physical-chemical and electrochemical characterization. PP-HC showed an astonishingly high stability for 90 h or 8000 cyclic voltammetries, with the hydrochar suffering only slight modifications, as measured by FTIR and XPS. This innovative study opens a path to efficient and environmentally friendly green hydrogen., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Decorated electrode surfaces with nanostructures and metal-organic frameworks as transducers for sensing

  • Caruncho Pérez, Sara
  • Díez Sarabia, Aida Maria
  • Prado Comesaña, Ana M.
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
In this study, several materials are presented as modifiers of the screen-printed carbon electrodes with the aim of developing new sensing platforms for the voltammetric analysis of drugs. Specifically, Clotiapine and Sulfamethoxazole were selected as models for antipsychotics and antibiotics, respectively. Different nanostructures were studied as modifiers, including both transition metals and carbon-based materials. Moreover, biochar and two metal-organic frameworks (MOFs) were tested as well. The NH2-MIL-125(Ti) MOF showed an 80% improvement in the analytical signal of Sulfamethoxazole, but it partially overlapped with an additional signal associated with the loss of the MOF ligand. For this reason, several immobilization strategies were tested, but none of them met the requirements for the development of a sensor for this analyte. Conversely, carbon nanotubes and the NH2-MIL-101(Fe) MOF were successfully applied for the analysis of Clotiapine in the medicine Etumine®, with RSD below 2% and relative errors that did not exceed 9% in any case, which demonstrates the precision and accuracy achieved with the tested modifications. Despite these promising results, it was not possible to lower the limits of detection and quantification, so in this sense further investigation must be performed to increase the sensitivity of the developed sensors., Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Heterogeneous advanced oxidation processes: current approaches for wastewater treatment

  • Lama Rodriguez, Gabriela
  • Meijide Fernandez, Jessica
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
Nowadays, water pollution is one of the most dangerous environmental problems in the world. The presence of the so-called emerging pollutants in the different water bodies, impossible to eliminate through conventional biological and physical treatments used in wastewater treatment plants due to their persistent and recalcitrant nature, means that pollution continues growing throughout the world. The presence of these emerging pollutants involves serious risks to human and animal health for aquatic and terrestrial organisms. Therefore, in recent years, advanced oxidation processes (AOPs) have been postulated as a viable, innovative and efficient technology for the elimination of these types of compounds from water bodies. The oxidation/reduction reactions triggered in most of these processes require a suitable catalyst. The most recent research focuses on the use and development of different types of heterogeneous catalysts, which are capable of overcoming some of the operational limitations of homogeneous processes such as the generation of metallic sludge, difficult separation of treated water and narrow working pH. This review details the current advances in the field of heterogeneous AOPs, Fenton processes and photocatalysts for the removal of different types of emerging pollutants., Ministerio de Ciencia e Innovación | Ref. PID2020-113667GB-I00, Ministerio de Ciencia e Innovación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED481B 2018/096
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Structured organic frameworks as endocrine disruptor adsorbents suitable for Fenton regeneration and reuse

  • Díez Sarabia, Aida Maria
  • García Ocampo, Juanjo
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Kolen’ko, Yury V.
New porous materials, such as metal-organic frameworks (MOFs) and covalent-organic frameworks (COFs), have been actively investigated due to their environmental applications. In this study, four of such structured materials, namely Fe3O4 @COF, MIL-53(Al), MIL-53(Al)-F127 and NH2-MIL-101(Fe) were synthetized. These materials have been tested for the first time for the adsorption in aqueous media of two endocrine disruptor pollutants, bisphenol A (BPA) and prednisolone (PDN). The adsorbents were characterized by the analysis of the point of zero charge (PZC), the functional groups (FTIR) and their physic-chemical structure (N2-isotherms, SEM, XRD and XPS). MIL-53-Al provided the highest uptake of both BPA (177.78 mg g− 1) and PDN (280.70 mg g− 1) even when using a real wastewater matrix. Additionally, this MOF resulted to be a so-called catalytic-adsorbent, maintaining an appropriate adsorbent capacity after five regenerations cycles via Fenton-like process, causing only 20% and 5% adsorption detriment for BPA and PDN, respectively. This avoids spent adsorbent disposal issues and make this new kind of adsorbent to have the potential to be used in real environmental application scenarios., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Valorized S/N-doped banana peel biochar as a sustainable OER electrocatalyst for green energy applications

  • Escudero Curiel, Silvia
  • Díez Sarabia, Aida Maria
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Decarbonization necessitates innovative energy solutions, such as H2 production through water splitting reactions, which critically relies on efficient catalysts to enhance both efficiency and cost-effectiveness. Employing carbocatalysts synthesized from agro-industrial residues and co-doped with nitrogen and sulfur represents a groundbreaking strategy that not only supports decarbonization efforts but also accelerates the transition towards a circular economy model. In this study, we have developed a novel oxygen evolution reaction (OER) ecoelectrocatalyst by doping banana peel-derived biochar with varying levels of thiourea. The optimal ecoelectrocatalyst, 5 %-S/N@BC, significantly surpasses the efficiency of IrO2 and outperforms many reported carbon-based electrodes in terms of initial performance and long-term stability. Notably, it achieves overpotentials of 290, 322, and 334 mV at current densities of 10, 50, and 100 mA cm����� 2, respectively, over 30-h periods. The process has been optimized regarding pH, catalyst dose, and dopant concentration. Furthermore, the eco-electrocatalyst demonstrates a competitive overall water splitting behavior, attaining a notably low cell voltage of 1.58 V required for reaching 10 mA cm����� 2. Comprehensive characterization using FTIR, Raman, XRD, XPS, and SEM-EDS have been conducted to validate these findings. This represents the first demonstration of a metal-free S/N@BC catalyst derived from banana peel for efficient OER. Our research highlights the significance of avoiding precious and transition metals, as well as the value of creating carbon-based catalysts fully sourced from biomass. The development of such materials plays a crucial role in advancing sustainable catalyst design while fostering a circular economy through the effective utilization of agro-industrial waste. Furthermore, only a limited number of studies have focused solely on biomass-derived materials, and among those, their catalytic performance rarely exceeds the results demonstrated in this work., Xunta de Galicia | Ref. ED481B-109, Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. RYC2023-044934-I, Universidade de Vigo
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Novel Fe-Ti nanoparticles synthesized in deep eutectic solvents for enhanced photo-electro-Fenton processes: Synergistic effects and environmental applications

  • Puga Pazo, Antón
  • Meijide Fernandez, Jessica
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Rosales Villanueva, Emilio
An innovative titanium-magnetite (Fe-Ti) catalyst was developed using a production strategy based on water-free solvents such as deep eutectic solvents (DES) for the removal of persistent pollutants. The prepared catalyst was applied in electro-Fenton and photo-electro-Fenton processes. To this end, a new cell design with electrodes based on conductive materials was developed using 3D printing in two different electrochemical cells configurations: vertical electrode configuration (VEC) and horizontal electrode configuration (HEC). The HEC showed good performance attaining a yield hydrogen peroxide production of 20 mg⋅L1 and being able to operate in electro-Fenton degradation batch assays for the removal of the drugs (Antipyrine and Lissamine Green B). Then, the heterogeneous bimetallic catalyst (BC-FeTi) was tested and compared with the monometallic Fe catalyst (MCFe). The results with both catalysts showed a synergistic effect combining electrochemical oxidation and Fenton reaction, promoting the best removal of the target pollutants. Subsequently, the contribution of UV radiation was evaluated with BC-FeTi, achieving that more than 80 % of both pollutants were removed in 80 min by the photo- Fenton process, confirming the high affinity of oxidizing free radicals for high molecular weight organic molecules. Finally, the simultaneous application of electro- and photo-oxidation (photo-electro-Fenton) significantly improved the removal of the target contaminants from the aqueous solution, achieving complete removal in 50 and 80 min for Lissamine Green B and Antipyrine, respectively. The stability and reusability of BC-FeTi and 3Dprinted electrodes were achieved in five successive working cycles, with negligible loss of activity compared to new catalysts, which achieved greater than 99 % removal after five consecutive runs. Leaching of iron and titanium from the catalyst evaluated throughout the cycles, was low, totalling 2.7 and 4.5 % at the end of the fifth cycle., Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED481B 2018/096, Xunta de Galicia | Ref. ED431C 2021-43, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of eco-friendly cathodic electrodes incorporating nano Zero-Valent iron (NZVI) for the electro-fenton treatment of pharmaceutical wastewater

  • Tesnim, Dhiss
  • Díez Sarabia, Aida Maria
  • Ben Amor, Hédi
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
The electro-Fenton process has the potential to be an efficient effluent treatment method, contingent on effective process optimization. It relies on two critical components: efficient in-situ H2O2 generation and the integration of highly reactive heterogeneous catalysts into electrode synthesis. In this study, several cathodic electrodes were synthesized, including those using zero-valent iron nanoparticles (P-NZVI), zero-valent iron nanoparticles sup ported on activated carbon (AC-NZVI), and El Hamma Bentonite clay loaded with zero-valent iron nanoparticles (HB-NZVI). These electrodes were fabricated using sustainable, straightforward methods and subjected to thorough physicochemical and electrochemical characterization. The goal of this research was to develop environmentally friendly cathodes, employing either pressed catalyst techniques or supporting the catalyst on carbon felt (CF) or titanium foil. These electrodes were evaluated within a heterogeneous electro-Fenton-like process, with a boron-doped diamond (BDD) anode, targeting the efficient degradation of the pharmaceutical pollutant Antipyrine (ATP). Among the tested configurations, the AC-NZVI/CF electrode demonstrated the highest degradation efficiency. Key experimental parameters, such as pH, current density, and water matrices, were systematically studied to optimize the process. Under optimal conditions (pH 7, current density of 55 mA A/cm2), 80 % mineralization of a 40 mg/L ATP solution was achieved within 150 min, with an energy con sumption of just 0.3502 kWh/g. The performance of the AC-NZVI/CF electrode remained stable when applied to real wastewater and after five consecutive cycles. Comprehensive analyses using FTIR, SEM-EDS, and XPS confirmed the stability and recyclability of the electrode, showcasing its potential for sustainable wastewater treatment applications., Agencia Estatal de Investigación | Ref. PID2020-113667 GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2021-43, Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Efficiency of a novel cysteine-polypyrrole@silver phosphate nanocomposite for hazardous Cr(VI) removal: Experimental study and statistical optimization modeling

  • Zouggari, Hamid
  • Mahir, Fatima-Zahra
  • Díez Sarabia, Aida Maria
  • Pazos Currás, Marta María
  • Laabd, Mohamed
  • Aarab, Nouh
  • Bazzi, Lahcen
  • Albourine, Abdallah
A novel cysteine functionalized-Polypyrrole@silver phosphate (Cys-PPy@Ag3PO4) nanocomposite, synthesized through chemical polymerization was used for fully reducing Cr(VI) to Cr(III) and successfully capturing the Cr(III), representing a major leap in Cr(VI) remediation technology. Assorted analytical approaches, such as Fourier-transforms infrared (FT-IR) spectroscopy, X-ray diffraction (XRD), X-ray photoelectron (XPS) spectroscopy, Brunauer-Emmett-Teller (BET), scanning electron microscopy-energy-dispersive X-ray spectroscopy (SEM-EDS), were implemented to explore the morphology and removal mechanism. The nanocomposite exhibited a mesoporous structure enriched with nitrogen/oxygen functional groups, which improved the diffusion, adsorption, and reduction of Cr(VI) ions. At pH 2, 96.50 % of Cr(VI) was removed using 0.5 g.L−1 of adsorbent in 60 min. Besides, the maximum uptake capability was 14.76 mg.g−1, and both Freundlich isotherm and PSO kinetic models perfectly aligned with the adsorption experimental findings for Cr(VI) species. Analysis of thermodynamic factors revealed that Cr(VI) adsorption was endothermic and spontaneous, enhancing the disorder of Cr(VI) species on the nanocomposite surface. XPS and FT-IR analysis proved that Cr(VI) ions were electrostatically adsorbed and subsequently converted to Cr(III), which were then immobilized through chelation with imine/sulfonate groups and electrostatic attraction with carboxylate groups. The nanocomposite showcased effortless regenerability through basification and outstanding reusability. Overall, Cys-PPy@Ag3PO4 proved highly effective in removing Cr(VI) from water, Agencia Estatal de Investigación | Ref. PID2020-113667 GB-I00, Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Magnetic TiO2/Fe3O4-chitosan beads: a highly efficient and reusable catalyst for photo-electro-fenton process

  • Rezgui, Soumaya
  • Diez Sarabia, Aida Maria
  • Monser, Lotfi
  • Adhoum, Nafaa
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Heterogeneous photo-electro-Fenton process is an attractive technology for the removal of recalcitrant pollutants. To better exploit the presence of an irradiation source, a bifunctional catalyst with TiO2 nanoparticles embedded into an iron–chitosan matrix was developed. The catalytic activity of the catalyst was improved by the optimization of the loaded TiO2content. The prepared composite catalysts based on TiO2, Fe3O4 and chitosan were called TiO2/Fe3O4-CS beads. The best catalyst with an optimal ratio TiO2/Fe = 2 exhibited a high efficiency inthe degradation and mineralization of chlordimeform (CDM) insecticide. Under the optimum conditions (concentration of catalyst equal to 1 g L−1 and applied current intensity equal to 70 mA), a real effluent doped with 30 mg L−1 of CDM was efficiently treated, leading to 80.8 ± 1.9% TOC reduction after 6 h of treatment, with total removal of CDM after only 1 h.The generated carboxylic acids and minerals wereidentified and quantified. Furthermore, the stability and reusability of the developed catalyst was examined, and an insignificant reduction in catalytic activity was noticed forfour consecutive cycles of the photo-electro-Fenton process. Analyses using SEM, XRD and VSM showed a good stability of the physicochemical properties of the catalyst after use., Xunta de Galicia | Ref. ED481B 2019/091, Ministerio de Ciencia e Innovación | Ref. PID2020-113667GB-I00 464, Universidad de Kairouan, Túnez | Ref. UR16ES02
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Magnetically recoverable PANI@α-Fe2O3-montmorillonite for fast simultaneous removal of Cr(VI) and OG dye from synthetic and actual wastewater

  • Mahir, Fatima-Zahra
  • Zouggari, Hamid
  • Díez Sarabia, Aida Maria
  • Djellabi, Ridha
  • Pazos Currás, Marta María
  • Bazzi, Lahcen
  • Laabd, Mohamed
  • Albourine, Abdallah
  • Addi, Abdelaziz Ait
Multifunctional adsorbents capable of simultaneously removing heavy metals and organic dyes hold significant real-world application potential. Polyaniline-coated α-Hematite-Montmorillonite (PANI@α-Fe2O3-Mt) was designed via an interfacial polymerization technique and used to remove concurrently Cr(VI) and OG dye from water. Its well-integrated structure provided high stability and abundant active sites, facilitating the efficient elimination of OG dye and Cr(VI) from water. Box-Behnken design analysis showed excellent predictive performance and to be a suitable process optimization tool for the removal of OG and Cr(VI), achieving R2 values of 0.999 and 0.998, respectively. Both pollutants fitted well to the pseudo-second-order model (PSO) in the kinetic study, reaching the adsorption equilibrium within 50 min for OG and 60 min for Cr(VI). Multilayer adsorption of OG and Cr(VI) onto PANI@α-Fe2O3-Mt was confirmed through the Freundlich isotherm model, demonstrating highest uptake capabilities of 250.189 mg g−1 for OG and 284.90 mg g−1 for Cr(VI), surpassing those reported with many other adsorbents. OG adsorption is governed by electrostatic and π-π interactions, hydrogen bonding, while Cr(VI) removal involves electrostatic attraction, reduction to Cr(III), and chelation by nitrogen moieties. Collectively, the results demonstrate that the uniform PANI coating on the α-Fe2O3-Mt surface produced a novel and highly efficient bio-adsorbent, effectively removing OG and Cr(VI) ions from contaminated water. Due to its magnetic properties, PANI@α-Fe2O3-Mt could be easily recovered and reused, suggesting facile and cost-effective process. In fact, PANI@α-Fe2O3-Mt achieved 90.89 % OG and 87.5 % Cr(VI) removal in real wastewater, with reusability sustaining 83.54 % and 80.11 % efficiency over four cycles., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. RYC2023-044934-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Fluoride-doped TiO2 photocatalyst with enhanced activity for stable pollutant degradation

  • Diez Sarabia, Aida Maria
  • Núñez, Iván
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Kolen’ko, Yury V.
Fluoride-doped TiO2 (F-TiO2) was synthesized by an efficient and simple one-step synthesis and successfully used for the UV-photo-degradation of the toxic and stable pollutants methylene blue (MB) and bisphenol A (BPA). Initially, the synthesized catalyst was characterized and compared to untreated TiO2 (P25 Degussa) by different physical–chemical analyses such as XRD, band gap calculation, SEM, EDS, FITR, ECSA, or EIS. F-TiO2 defeated commercial TiO2, and almost complete pollutant removal was achieved within 30 min. The energy consumption was reduced as a result of the suitable reactor set-up, which reduced light scattering, and by the application of a long-pulse radiation procedure, where the lamp was switched off during periods where the radical degradation continued. This enhanced the overall photocatalysis process performance. Under these conditions, 80% of MB removal was attained within 15 min radiation with an energy consumption of only 0.070 Wh min−1, demonstrating a much better efficiency when compared to previously reported data. The catalyst was reusable, and its performance can be improved by the addition of H2O2. The results were validated by BPA degradation and the treatment of real wastewaters with both pollutants. The results were so encouraging that a scale-up reactor has been proposed for future studies., Xunta de Galicia | Ref. ED481B 2019/091, Xunta de Galicia | Ref. ED431C 2021-43, Ministerio de Ciencia e Innovación | Ref. PCI2022-132941, Ministerio de Ciencia e Innovación | Ref. PID2020- 113667GB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Anti-inflammatory drug diclofenac removal by a synthesized MgAl layered double hydroxide

  • Mkaddem, H.
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • Ben Amor, H.
  • Sanromán Braga, María Ángeles
  • Meijide Fernandez, Jessica
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Layered double hydroxides (LDHs) containing Mg:Al (molar ratio 3:1) were synthesized by coprecipitation from nitrate salts under alkaline conditions. Their further characterisation by different techniques allowed the determination of their structural, nanotextural and chemical properties. XRD measurements confirmed the high crystallisation with the presence of two metal cations (Mg2+ and Al3+). The use of these materials as eco-friendly adsorbents was analysed to remove diclofenac from wastewater. Under optimal conditions (0.4 g L 1, 30 ppm initial pollutant concentration, pH 8.5), around 65% diclofenac removal was achieved after 60 min of treatment. The pseudo-second kinetic order model and Freundlich isotherm accurately described the experimental data, suggesting chemisorption process on the heterogeneous LDH surface. After diclofenac adsorption, XRD analysis revealed an increase in interlayer spacing followed by contraction of adjacent layers, so that anion exchange between layer was considered to be the main mechanism for diclofenac adsorption. Thermodynamic studies indicate diclofenac adsorption occurs spontaneously, endothermically, and also, with increasing randomness at the solid/solution surface. Batch test revealed limitations in terms of long-term stability of the material. Therefore, a post-synthesis strategy, calcination, was required to increase the degree of resistance. For this purpose, the effect of calcination temperature was examined in the range 200–300 C. Although, the kinetic rate constant decreased slightly after calcination, the improvement of its structural properties allowed to operate under continuous system., Ministerio de Ciencia e Innovación | Ref. PID2020- 113667 GB-I00, Ministerio de Ciencia e Innovación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED431C 2021-43, Xunta de Galicia | Ref. ED481B 2018/096
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

On-site regeneration by ultrasound activated persulfate of iron-rich Antipyrine-loaded biochar

  • Ouiriemmi , Imen
  • Escudero Curiel, Silvia
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Adsorption process has proven its efficiency in the abatement of pharmaceuticals in liquid media, even if large volumes of wastewater need to be treated. Nevertheless, exhausted adsorbent regeneration is economically and environmentally necessary. For this reason, recent studies are aimed at finding new methods of regeneration. In this study, an on-site adsorption-regeneration method was assessed. Initially, a model pharmaceutical, Antipyrine (Apy), has been adsorbed onto a low-cost biochar. Apy adsorption followed a pseudo-second order kinetic and a Langmuir isotherm. In a second step, spent biochar was regenerated by oxidation using SO4- . To do this, SO4- was generated by activation of persulfate by ultrasound and assisted by the iron inherently into the biochar. To facilitate the availability of this iron, the addition of an enhancing agent such as oxalic acid was evaluated. The regenerated biochar proved its stability and reusability achieving an uptake percentage of around 87% after the third adsorption-regeneration cycle. Therefore, this on-site regeneration method could be promising for treating other kinds of adsorbents and resolving the pollution problems caused by the non-controlled throw of the exhausted adsorbents., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED431C 2021-43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Electrochemistry solving problems in water disinfection: Direct voltammetric monitoring of pyocyanin from Pseudomonas aeruginosa

  • Caruncho Pérez, Sara
  • Giráldez Rodríguez, Alba
  • Terrón Hernández, Daniel
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
This work presents the development of a voltammetric methodology for the direct determination of the exclusive pigment pyocyanin generated by Pseudomonas aeruginosa using cheap, disposable unmodified screen-printed carbon electrodes. The redox processes involved in phenazine transformations in different media were studied using cyclic voltammetry. After confirming that the transport of matter is governed by diffusion, the diffusion coefficients of the oxidized species were inferred. To study samples of the bacteria square wave voltammetry was selected, and the most critical instrumental parameters were optimized before obtaining a calibration that covers a dynamic linear range from 0.29 to 11.65 μM, with a limit of detection of 0.09 μM. To verify that the method is applicable to real cases, the concentration of pyocyanin in samples of the bacteria was first quantified without the need to pretreat or dilute the sample. After that, the monitoring of bacterial growth was carried out using pH, conductivity and turbidity control measurements to support the interpretation of electrochemical measurements. Lastly, the voltammetric method was also applied to evaluate the evolution of the disinfection of synthetic wastewater containing the bacteria. For this purpose, a bimetallic metal-organic framework with antimicrobial properties was used to reduce the viable population to more than half, thus achieving the same efficiency as anodic oxidation but without the need to apply a current intensity. Furthermore, by combining both processes in an electro-Fenton assay, it was possible to completely eliminate the viable population in the first 2 min, in agreement with the electrochemical findings, confirming that the voltammetric method is valid for the study of the bacteria behavior., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Iron metal-organic framework nanofiber membrane for the integration of electro-Fenton and effective continuous treatment of pharmaceuticals in water

  • Lomba Fernandez, Bárbara
  • Fernández Sanromán, Antía
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Rosales Villanueva, Emilio
In this study, an iron metal-organic framework (Fe-MOF) was synthesized and immobilized by electrospinning technique with the objective of obtaining a membrane composed of nanofibers of this material (Fe-MOF nanofiber membrane). The characterization performed by XRD, TEM, SEM, EDS mapping and FTIR confirmed the correct synthesis of Fe-MOF as well as its correct retention in the elaborated membranes. The usefulness and effectiveness of the Fe-MOF nanofiber membrane as a catalyst for the electro-Fenton process was evaluated by performing sulfamethoxazole degradation tests. Different parameters such as the effect of intensity (25 and 100 mA), the effect of the drug initial concentration (10–50 mg/L) and the reusability of membranes were studied. Then, the degradation of a drug mixture formed by sulfamethoxazole and antipyrine was evaluated, reaching a degradation of 92.10 % and 87.43 % respectively for each drug in 4 h at 25 mA. In addition, the identification of reactive oxygen species was ascertained by scavenger assays. The study of degradation products was also carried out and their toxicity was predicted by ECOSAR program, concluding that the environmental toxicity would disappear with mineralization. Finally, given the good results obtained in batch tests, the behavior of the process was studied in a system that works continuously, achieving a stable degradation of 83.10 % in the case of treatment with a mixture of drugs. This confirmed the stability of the Fe-MOF nanofiber membrane, as well as, its catalytic activity, making it suitable for long-term treatments., Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. TED2021-129590A-I00, Xunta de Galicia | Ref. ED431C2021-43, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PRE2021-098540, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Methodology for decentralized analysis: detection, quantification and in situ monitoring of pharmaceutical formulations removal by electro-Fenton

  • Caruncho Pérez, Sara
  • Prado Comesaña, Ana M.
  • Arellano Pardo, María
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
Water quality is essential to both human and ecosystem health, and a fast detection of emerging pollutants is claimed, along with effective wastewater treatment plants to eliminate these types of substances. The goal of this study was the development of a sensitive and selective methodology to customize a handle device that meets this demand. Clozapine and its pharmacological formulation, Leponex®, were used as a model. The results obtained from the studies by differential pulse voltammetry (DPV) demonstrated that this methodology allows a simpler and cheaper decentralized analysis without losing sensitivity, performing electrochemical measurements in situ, in real-time and directly without sample treatment, with a good precision (RSD 3.7 %) and excellent accuracy (recoveries between 97.6 and 99.9 %). Moreover, the methodology was successfully used for direct follow-up the medicine removal in real samples by electro-Fenton (EF) treatment. The results gathered showed a relative error of less than 2 % concerning the measurements made with the conventional potentiostat. Bearing this in mind, the effectiveness of these electrochemical techniques used in tandem with the comfort and high specificity offered by the portable device, a more exhaustive control of water quality can be achieved, thus improving the quality of life in the planet., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431D 2017/06
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Heterogeneous electro-Fenton system using Fe-MOF as catalyst and electrocatalyst for degradation of pharmaceuticals

  • Fernández Sanromán, Antía
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Rosales Villanueva, Emilio
In recent years, heterogeneous electro-Fenton processes have gained considerable attention as an alternative to homogeneous processes. In this context, the aim of this study is the use of a commercial iron metal-organic framework (Fe-MOF), Basolite® F-300, as a base material for the design of a heterogeneous electro-Fenton treatment system for the removal of antipyrine. Initially, the catalyst was applied as powder in aqueous solution and three key parameters of the electro-Fenton process (pH, Fe-MOF concentration and current density) were evaluated and optimized by a Central Composite Design Face Centred (CCD-FC) using antipyrine removal and energy consumption as response functions. Near complete antipyrine removal (94%) was achieved under optimal conditions: pH 3, Fe-MOF 157.78 mg/L and current density 6.67 mA/cm2, obtaining an energy consumption of 0.29 W·h per mg of antipyrine removed. Later, two electrocatalysts (Fe-MOF functionalized cathodes), prepared by different Fe-MOF immobilisation approaches (composite of carbon black/polytetrafluoroethylene or by electrospinning on Ni foam), were synthesized. Their characterisation showed notable Fe-MOF incorporation into the material and favourable properties as electrocatalysts. Both Fe-MOF functionalized cathodes were evaluated in the removal of antipyrine at different pH (acidic and natural) and current density (27.78 and 55.56 mA/cm2), achieving in the best conditions removal levels around 80% in 1 h without any operational problems. In addition, several intermediates generated during the treatment were identified and their toxicity estimated. According to the obtained results, the degradation compounds have less toxicity than the parent compounds, confirming the effectiveness of the treatment., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED431C 2021–43, Agencia Estatal de Investigación | Ref. PRE2021-098540, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

GO-TiO2 as a highly performant photocatalyst maximized by proper parameters selection

  • Diez Sarabia, Aida Maria
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Kolen’ko, Yury V.
The synthesis and characterization of novel graphene oxide coupled to TiO2 (GO-TiO2) was carried out in order to better understand the performance of this photocatalyst, when compared to well-known TiO2 (P25) from Degussa. Thus, its physical-chemical characterization (FTIR, XRD, N2 isotherms and electrochemical measurements) describes high porosity, suitable charge and high electron mobility, which enhance pollutant degradation. In addition, the importance of the reactor set up was highlighted, testing the effect of both the irradiated area and distance between lamp and bulb solution. Under optimal conditions, the model drug methylthioninium chloride (MC) was degraded and several parameters were assessed, such as the water matrix and the catalyst reutilization, a possibility given the addition of H2O2. The results in terms of energy consumption compete with those attained for the treatment of this model pollutant, opening a path for further research., Xunta de Galicia | Ref. ED481B 2019/091, Ministerio de Ciencia e Innovación | Ref. PID2020-113667GB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Photoelectrocatalytic degradation of pharmaceuticals promoted by a metal-free g‑C3N4 catalyst

  • Torres Pinto, André
  • Díez Sarabia, Aida Maria
  • Silva, Cláudia G.
  • Faria, Joaquim L.
  • Sanromán Braga, María Ángeles
  • Silva, Adrián M.T.
  • Pazos Currás, Marta María
Graphitic carbon nitride (g-C3N4) recently emerged as a remarkable photoelectrocatalyst for water treatment. Advanced oxidation processes (AOPs) consisting of photoelectrocatalytic (PEC) systems are being researched towards the development of sustainable strategies for the complete removal of refractory contaminants from effluents of urban wastewater treatment plants (WWTPs). This work consists of the optimisation of a PEC system, composed of a boron-doped diamond (BDD) anode, titanium cathode, and a suspended g-C3N4 photoelectrocatalyst, for the treatment of both synthetic and real urban waste waters spiked with pharmaceutical active compounds (PhACs). Different working parameters were considered and optimised to improve degradation and mineralisation rates, such as the cathode material, anode-to-cathode distance, electrolyte resistivity, and matrix composition. The optimal conditions allowed removals of 100 % diclofenac, 88 % fluoxetine and 77 % ibuprofen in the complex wastewater matrix. Moreover, it was observed that the presence of other refractory organic molecules offered a greater impediment to PEC treatment than residual co-existing substances. The main oxidative agents were investigated by scavenging experiments, showing that generated holes and reactive oxy-species, i.e. hydroxyl and superoxide radicals, take a major role in the degradation of PhACs. The recyclability of the g-C3N4 suspension as photoelectrocatalyst in the PEC process provides a promising perspective for the development of wastewater treatment units., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED481D-2023/015, Deputación Provincial de Pontevedra, Fundação para a Ciência e a Tecnologia | Ref. 2022.08738.PTDC, Fundação para a Ciência e a Tecnologia | Ref. 2022.04682.PTDC, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Enhancing sulfamethizole adsorption on graphitic carbon nitride via coffee hydrochar incorporation and electric field application in different water matrices

  • Fernández Sanromán, Antía
  • Díez Sarabia, Aida Maria
  • Sanromán Braga, María Ángeles
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
This study addresses the urgent need for sustainable and efficient water treatment solutions by developing a new green material with enhanced adsorption capabilities through the incorporation of hydrocarbons derived from banana peels (HC-P) or coffee waste (HC-C) into graphitic carbon nitride (GCN). In addition to its dual functionality of electrosorption and catalytic activity, this environmentally friendly synthesis avoids the use of organic solvents and metals, reducing its environmental footprint and costs. Initial tests on sulfamethizole (SMZ) adsorption and electrosorption were conducted with both hydrochars, with HC-C demonstrating superior performance. The optimization of HC-C content in the composite revealed that 10 wt%(GCN@HC-C10) provided the best results. Using this composite around 95% SMZ removal under electrosorption at 1.2 V was achieved in only 120 min. The compound was then immobilized on a carbon felt electrode (GCN@HC-C10/CF), which facilitated its practical application and reuse in real water systems. The durability of GCN@HC-C10/CF was validated by five cycles, and its photocatalytic regeneration under visible LED light resulted in minimal reduction of adsorption capacity (<8%). The hybrid electrosorption-regeneration process successfully mineralized SMZ during photoregeneration, highlighting the potential of GCN@HC-C10/CF for efficient and sustainable pollutant removal. To our knowledge, there are no previous studies reporting green catalytic materials with dual functionality such as the one presented here. Finally, tests on real water samples (tap and river) underline the applicability of the material in various water purification contexts, positioning it as a promising candidate for water purification applications., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2021–43, Agencia Estatal de Investigación | Ref. PRE2021-098540, Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Enhancing stability and immobilization techniques for graphitic carbon nitride in photocatalytic applications

  • Fernández Sanromán, Antía
  • Lomba Fernandez, Bárbara
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
Emerging contaminants from urban and industrial sources require effective water treatment and photocatalysis using graphitic carbon nitride (GCN) is emerging as a promising solution. This graphitic polymer, devoid of metals in its structure, exhibits properties similar to titanium oxide, the quintessential traditional photocatalyst. This work aims to optimize the application of GCN as photocatalysts, emphasizing its role in photocatalytic processes by improving its properties for the visible light-assisted photodegradation process and assessing the removal of a selected pollutant, Rhodamine B. Initially, the role of the catalyst precursor (urea, melamine and a ratio 1:1 of them) in the synthesis was evaluated. GCN obtained from urea as precursor yielded to better properties and higher purity of the catalyst. In addition, through acid treatment, slight improvements in the material properties were verified, such as an increase of the crystallinity and active sites. This acid modified catalyst enhanced the photocatalytic process, achieving complete removal of Rhodamine B in 30 min. A significant improvement in the chemical stability of the material was also observed, maintaining nearly its entire removal efficacy after 10 cycles. However, several operational problems were observed due to the powder form of the GCN, and, thus, requesting the development of efficient immobilized catalysts. Therefore, three techniques (encapsulation, electrospinning, and composite) were evaluated and the variations in GCN distribution and their influence on the photocatalysis process ascertained. From this evaluation, it can be concluded that the electrospinning technique, using polyacrylonitrile polymer (PAN) to form fibres, generated a highly porous, hydrophilic material with excellent floatability. This allowed maximizing radiation exposure during the process, achieving an 85 % reduction of Rhodamine B concentration in 90 min. Among other remarkable properties, GCN exhibits high reusability when incorporated into PAN fibres, as it remained chemically and physically stable, retaining more than 85 % of its dye removal efficiency after 4 cycles, Agencia Estatal de Investigación | Ref. PID2020-113667 GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PRE2021-098540, Xunta de Galicia | Ref. ED431C 2021–43, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Voltammetric methodology for the quality control and monitoring of sulfamethoxazole removal from water

  • Caruncho Pérez, Sara
  • Bernárdez Rodas, Nuria
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
Sulfamethoxazole is an antibiotic that is among the drugs most frequently found in waters around the world because of its habitual consumption and its high chemical stability that prevents it from being eliminated from the environment. In this study, an electroanalytical methodology based on differential pulse voltammetry is developed for the analysis of sulfamethoxazole at trace levels in water. After the optimization of the instrumental parameters a linear range from 6.59 to 96.27 μM was found with limits of detection and quantification of 1.98 and 6.59 μM, respectively, with an RSD below 6 %. Moreover, several validation studies involving different pH values, water samples and instrumentation-techniques were performed in order to ensure the robustness of the method. For this purpose, the peak area was used as quantitative variable since it is not affected by the pH of the medium even if there is any modification of this parameter during the experiments. Furthermore, the effect of other drug such as trimethoprim on the analytical signal of sulfamethoxazole was also evaluated. Once the method was developed it was tested on the quality control of Soltrim®, obtaining recoveries between 98 and 102 %. Lastly, the voltammetric method was applied for the in situ monitoring of sulfamethoxazole’s removal from water samples, specifically by anodic oxidation and electro-Fenton treatments. While the former was coupled to an adsorption process, the latter was carried out with different iron sources including commercial medicines that can be found in wastewater. The problem of significant variation in pH during the treatment was solved by working with the peak area, and so obtaining valid and reliable kinetic data. Although anodic oxidation proved to be faster considering the calculated kobs, electro-Fenton turned out to be more efficient in eliminating the drug, achieving the disappearance of its analytical signal in only 30 min of treatment., Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Efficient fluoxetine removal from water using Tunisian clay as adsorbent and its regeneration through NaOH-activated peroxymonosulfate

  • Atawa, Oumaima
  • Escudero Curiel, Silvia
  • Amor, Hedi Ben
  • Ouakouak, Abdelkader
  • Hamdi, Noureddine
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Pharmaceuticals in aquatic environments pose significant environmental and public health risks. This pioneering study introduces a novel approach to removing fluoxetine (FLX) through adsorption onto Tunisian purified clay (PC), while exploring an innovative adsorbent regeneration method via Advanced Oxidation Processes (AOPs). The adsorbent material was characterized using various techniques to determine its: morphological structure, physical properties, mineralogical composition and chemical composition. Key adsorption parameters (contact time, pH, and initial concentration) were optimized, the optimization process revealed an impressive maximum adsorption capacity of 390.28 mg/g for FLX by PC. The experimental data best fit with the pseudo-second order and Langmuir models, these findings provide insights into the adsorption mechanism and surface characteristics of the PC. The PC regenerated with PMS activated by NaOH is an interesting innovation in the field of reusable clay materials, maintaining a high performance across four cycles, with efficiency dropping only from 94 % to 64 %. The study’s findings represent a significant advancement in developing sustainable solutions for pharmaceutical removal from aquatic environments. By combining a highly efficient, locally-sourced adsorbent with a novel regeneration method, this research opens new avenues for addressing the growing concern of pharmaceutical contamination in water bodies, offering a promising, eco-friendly approach to water treatment technologies., Xunta de Galicia | Ref. ED481B-109, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2021–43, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Reduction of the environmental and health impact of hospital effluents through advanced oxidation processes, Reducción del impacto ambiental y sanitario de efluentes hospitalarios mediante procesos de oxidación avanzada, Redución do impacto ambiental e sanitario de efluentes hospitalarios mediante procesos de oxidación avanzada

  • Fernández Sanromán, Antía
The increase in the consumption of pharmaceuticals and the improvement of human health have gone in parallel with the continuous entry of these biologically active molecules into the environment. The removal efficiency of pharmaceuticals in WWTP is variable and some of these compounds pass these plants almost intact. Furthermore, hospitals are important sources of pathogens found in urban wastewaters, also the presence of emerging pathogens (eg SARS CoV 2) generates great concern in society. Thus the direct treatment of Hospital wastewater (HW) is a necessity, especially the removal of pharmaceuticals and pathogens who without appropriate treatment would expose society to danger of infection. This proposal aims to develop efficient decontamination processes for HW, considering the continuous proliferation of persistent emerging and dangerous pollutants (pharmaceuticals and pathogens). This project is continuation of previous ones of the national plan (CTM2014 52471 R, CTM2017 87326 R) and Research Group has long experience in synthesis, structural characterization of reactive materials, application and the monitoring based on the electroanalytical methodologies. Great efforts are focused on the removal of water pollutants by proficient processes as Adsorption or Advanced Oxidation Processes (AOP). However, the efficiency of both technologies depending on the quality of the reactive materials (adsorbent, electrode, or catalyst) used in each case, and therefore, on the ability to adapt their properties, in particular conductivity, porosity, and surface chemistry, for the designated treatment. In this proposal, several approaches will be addressed to contribute and enhance the knowledge in the use of these technologies for the treatment of pathogens and pharmaceuticals. The first approach will be the development of a strategy, inside in the circular economy, in which several industrial and agro-industrial wastes (swine manure, black liquor, olive waste, agroforestry, and fruit industry) will be treated by hydrothermal carbonization process with the aim of manufacturing multifunctional carbonaceous materials with appropriated properties for their use as adsorbent, electrode or catalyst. The second approach will be the synthesis of tailored reactive materials such as Metal Organic Framework (MOF) and Covalent Organic Framework (COF). These new solids can be used as reactive adsorbents, catalysts or can be a precursor of hierarchical carbonaceous structures very useful in the development of electrode materials. The developed materials will be assessed in different AOPs, including photocatalysis, electrooxidation and Fenton-based processes. The third approach to carry out in the proposal will be the development of analytical tools for quantitative screening at low concentration of pollutants using (bio)sensor-based technology on miniaturized electrochemical device for voltammetric and spectro-electrochemical measurements. The “transducers design by tailor-made modification” with the synthetized materials (MOFs/COFs) and other nanostructured catalysts will be carried out too. Thus, the monitoring of pharmaceuticals and pathogens and their intermediates will be assessed by decentralized analysis, achieving in situ and online or real time analysis. The overall objective will be the integration of some technologies for providing the monitoring and the complete removal of target pollutants from urban and hospitals effluents., El aumento del consumo de fármacos y la mejora de la salud humana han generado la entrada continua de estas moléculas biológicamente activas en el medio ambiente. La eficacia de eliminación de los fármacos en las EDAR es variable y algunos de estos compuestos pasan por estas casi inalterados. Por otro lado, los hospitales son una fuente de patógenos que se encuentran en las aguas residuales urbanas, además la presencia de patógenos emergentes (ej SARS-CoV-2) genera una gran preocupación en la sociedad. Por tanto, el tratamiento directo de las aguas residuales hospitalarias (HW) es una necesidad, especialmente la eliminación de fármacos y patógenos que sin el tratamiento adecuado expondrían a la sociedad al peligro de infección. Este proyecto tiene como objetivo profundizar en el conocimiento y la mejora de procesos eficientes de descontaminación de HW, centrado en fármacos y patógenos. El proyecto es una continuación de los previos (CTM2014 52471 R, CTM2017 87326 R) y el grupo acredita experiencia, en síntesis, caracterización estructural de materiales reactivos, aplicación y monitoreo mediante técnicas de electroanálisis. En la actualidad, se ha realizado avances en la eliminación de contaminantes mediante procesos como la Adsorción y de Oxidación Avanzada (AOP). Sin embargo, la eficiencia de estos procesos depende del material reactivo (adsorbente, electrodo o catalizador) utilizado en cada caso y, de la capacidad de adaptar sus propiedades, en particular conductividad, porosidad y grupos funcionales superficiales. En este proyecto se abordarán varios enfoques para contribuir y mejorar el conocimiento en el uso de estas tecnologías para el tratamiento de patógenos y fármacos. El primer planteamiento será el desarrollo de una estrategia, dentro de la economía circular, en la que varios residuos industriales y agroindustriales (estiércol, licor negro, residuos de aceituna, agroforestales y de la industria frutícola) serán tratados mediante proceso de carbonización hidrotermal con el objetivo de fabricar materiales carbonosos multifuncionales con propiedades adecuadas para su uso como adsorbente, electrodo o catalizador. El segundo enfoque será la síntesis de materiales reactivos a medida, como Metal Organic Framework (MOF) y Covalent Organic framework (COF). Estos materiales de diseño se pueden utilizar como adsorbentes reactivos, catalizadores o pueden ser un precursor de estructuras carbonáceas jerárquicas muy útiles en el desarrollo de materiales de electrodos. Los materiales desarrollados serán evaluados en diferentes AOPs, incluyendo fotocatálisis, electrooxidación y procesos Fenton-like. El tercer enfoque será el desarrollo de herramientas analíticas para la detección cuantitativa a baja concentración de los contaminantes utilizando tecnología basada en (bio)sensores en dispositivos electroquímicos miniaturizados. También se llevará a cabo el “diseño de transductores mediante modificación a medida” con los materiales sintetizados (MOFs / COFs) y otros catalizadores nanoestructurados. Así, para el seguimiento de productos farmacéuticos y patógenos y sus intermediarios se aplicará análisis descentralizados, logrando análisis in situ y online en tiempo real. El objetivo global será la integración de algunas tecnologías para proporcionar el monitoreo y la eliminación completa, reduciendo la toxicidad de los HW. Para ello se realizará el tratamiento de aguas residuales reales de efluentes urbanos y hospitalarios., O aumento do consumo de fármacos e a mellora da saúde humana han xerado a entrada continua destas moléculas biológicamente activas no medio ambiente. A eficacia de eliminación dos fármacos na EDAR é variable e algúns destes compostos pasan por estas case inalterados. Por outra banda, os hospitais son unha fonte de patógenos que se atopan nas augas residuais urbanas, ademais a presenza de patógenos emerxentes (ej SARS-CoV-2) xera unha gran preocupación na sociedade. Por tanto, o tratamento directo das augas residuais hospitalarias (HW) é unha necesidade, especialmente a eliminación de fármacos e patógenos que sen o tratamento adecuado exporían á sociedade ao perigo de infección. Este proxecto ten como obxectivo profundar no coñecemento e a mellora de procesos eficientes de descontaminación de HW, centrado en fármacos e patógenos. O proxecto é unha continuación dos previos (CTM2014 52471 R, CTM2017 87326 R) e o grupo acredita experiencia, en síntese, caracterización estrutural de materiais reactivos, aplicación e monitoreo mediante técnicas de electroanálisis. Na actualidade, realizouse avances na eliminación de contaminantes mediante procesos como a Absorción e de Oxidación Avanzada (AOP). Con todo, a eficiencia destes procesos depende do material reactivo (adsorbente, electrodo ou catalizador) utilizado en cada caso e, da capacidade de adaptar as súas propiedades, en particular conductividad, porosidad e grupos funcionais superficiais. Neste proxecto abordaranse varios enfoques para contribuír e mellorar o coñecemento no uso destas tecnoloxías para o tratamento de patógenos e fármacos. A primeira formulación será o desenvolvemento dunha estratexia, dentro da economía circular, na que varios residuos industriais e agroindustriais (estiércol, licor negro, residuos de oliva, agroforestais e da industria frutícola) serán tratados mediante proceso de carbonización hidrotermal co obxectivo de fabricar materiais carbonosos multifuncionais con propiedades adecuadas para o seu uso como adsorbente, electrodo ou catalizador. O segundo enfoque será a síntese de materiais reactivos a medida, como Metal Organic Framework (MOF) e Covalent Organic framework (COF). Estes materiais de deseño pódense utilizar como adsorbentes reactivos, catalizadores ou poden ser un precursor de estruturas carbonáceas xerárquicas moi útiles no desenvolvemento de materiais de electrodos. Os materiais desenvolvidos serán avaliados en diferentes AOPs, incluíndo fotocatálisis, electrooxidación e procesos Fenton-like. O terceiro enfoque será o desenvolvemento de ferramentas analíticas para a detección cuantitativa a baixa concentración dos contaminantes utilizando tecnoloxía baseada en (bio)sensores en dispositivos electroquímicos miniaturizados. Tamén levará a cabo o “deseño de transductores mediante modificación a medida” cos materiais sintetizados (MOFs / COFs) e outros catalizadores nanoestructurados. Así, para o seguimento de produtos farmacéuticos e patógenos e os seus intermediarios aplicarase análises descentralizadas, logrando análises in situ e online en tempo real. O obxectivo global será a integración dalgunhas tecnoloxías para proporcionar o monitoreo e a eliminación completa, reducindo a toxicidade dos HW. Para iso realizarase o tratamento de augas residuais reais de efluentes urbanos e hospitalarios., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED431C2021/43, Agencia Estatal de Investigación | Ref. PRE2021-098540
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Tuning graphitic carbon nitride (g-C3N4) electrocatalysts for efficient oxygen evolution reaction (OER)

  • Torres Pinto, André
  • Díez Sarabia, Aida Maria
  • Silva, Cláudia G.
  • Faria, Joaquim L.
  • Sanromán Braga, María Ángeles
  • Silva, Adrián M.T.
  • Pazos Currás, Marta María
Nowadays, energy conversion and storage technologies are essential research topics due to the necessity of more sustainable processes. Specifically, water splitting is highly affected by slow kinetics and limited knowledge of the oxygen evolution reaction (OER). This work envisages the preparation of graphitic carbon nitride (g-C3N4) electrocatalysts for efficient OER by a facile one-pot method. The impact of the preparation temperature (450–650 ◦C) of g-C3N4 was assessed for the first time on water splitting processes and explained by different characterisation techniques. The unique crystal structure, surface chemistry, and electronic properties of the material prepared at 550 ◦C lead to a remarkable OER efficiency, with an overpotential of 355 mV at 10 mA cm− 2 and a Tafel slope of 46.8 mV dec− 1. Interestingly, three major differences were observed when comparing the material prepared at 550 ◦C with those obtained at other temperatures: the reduced structural distortion, the superior composition in oxygen and the presence of terminal functional groups. Also, compared to other metalfree g-C3N4 electrocatalysts reported in the literature, we achieved lower Tafel slope values without additional post-treatments or co-catalysts. Hence, for the first time a metal-free catalyst defeats benchmark IrO2. The prepared electrodes were stable for up to 45 h, even when increasing the applied current density to 100 mA cm− 2 for 15 h. Thus, this work provides a simple route for the fabrication of highly-efficient and long-lasting electrocatalysts for a remarkable OER performance., Agencia Estatal de Investigación | Ref. PID2020-113667 GB-I00, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50020/2020, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50020/2020, Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Application of novel Zn-MIL53(Fe) for removal of micropollutants using an activated peroxymonosulphate system

  • Terrón Hernández, Daniel
  • Holgado Vázquez, J.P.
  • Giráldez Rodríguez, Alba
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
Novel zinc-doped Metal-Organic Framework based on MIL53(Fe) (Zn-MIL53(Fe)) has been successfully synthesised in one-step, exhibiting dual applications as adsorbent and catalyst. Initially, the adsorption capacity of MIL53(Fe) and Zn-MIL53(Fe) for removing Rhodamine B was assessed through kinetic and isotherm studies. The bimetallic variant exhibited superior performance, showcasing enhanced adsorption capabilities, particularly in the context of its physical interaction under natural pH. After that, the catalytic activity of both synthesised materials was evaluated to generate sulphate radicals by activating PeroxyMonoSulphate (PMS). It was also demonstrated that Zn-MIL53(Fe) exhibited the best catalytic activity being optimised using response surface methodology for Rhodamine B degradation (0.11 mM PMS and 43.2 mg Zn-MIL53(Fe)). Under optimal conditions, favourable outcomes were attained, facilitating the degradation of Rhodamine B, Fluoxetine, and Sulfamethoxazole by 93, 99, and 75 %, respectively. Furthermore, the operational stability of the Zn-MIL53(Fe) was verified, as it remains structurally and catalytically intact after different cycles., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED431C 2021-43, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Transductores electroquímicos y su aplicación en la calidad y el ciclo de vida del agua, Transdutores electroquímicos e a súa aplicación na calidade e no ciclo de vida da auga, Electrochemical transducers and their application in the quality and life cycle of water

  • Caruncho Pérez, Sara
En las últimas décadas, la preocupación de la comunidad científica sobre la presencia de fármacos en aguas de todo el mundo ha aumentado significativamente debido, en gran parte, a las nuevas evidencias encontradas de su impacto sobre el ecosistema acuático y su posible repercusión en la calidad de vida del ser humano. En consecuencia, los fármacos ya se están considerando contaminantes emergentes y cuya presencia en el agua debe ser debidamente regulada. Actualmente existen metodologías robustas que permiten llevar a cabo la determinación de estos compuestos, entre las que destaca la cromatografía líquida acoplada a detectores sensibles. Pero este tipo de técnicas son lentas y requieren tratamientos de muestra exhaustivos; además, generan una gran cantidad de desechos debido al elevado volumen de disolventes (mayormente orgánicos) consumidos. Las técnicas electroquímicas, por su parte, suponen una alternativa muy atractiva como consecuencia a la elevada sensibilidad y selectividad que ofrecen, pudiendo medir tanto en disoluciones como en suspensiones y, en la mayoría de casos, sin necesidad de un tratamiento de muestra previo, que se conjuga, al mismo tiempo, con una reducción del tiempo de análisis y del volumen de muestra requeridos, no produciendo residuos importantes y siendo éstos acuosos, menos contaminantes. De esta forma, es posible determinar no sólo su presencia en muestras de agua, sino también realizar el control de calidad de productos farmacéuticos comerciales. Por otra parte, la mayoría de plantas potabilizadoras de agua todavía no cuentan con metodologías apropiadas para poder monitorizar, por un lado, y eliminar, por el otro, este tipo de contaminantes orgánicos, que son altamente estables. Los procesos de oxidación avanzada permiten desarrollar métodos de degradación de estos compuestos, ya que involucran la generación de radicales hidroxilos altamente reactivos que permiten fragmentar de forma eficaz cualquier tipo de molécula, independientemente de su estabilidad. Por todo esto, en este proyecto, se pretende desarrollar metodologías electroanalíticas que permitan tanto detectar y cuantificar como monitorizar el proceso de degradación de contaminantes emergentes en muestras reales, contribuyendo a preservar la calidad del agua y a aumentar el ciclo de vida de los recursos hídricos de este bien tan escaso en muchas zonas del planeta., Nas últimas décadas, a preocupación da comunidade científica sobre a presenza de fármacos en augas de todo o mundo aumentou significativamente debido, en gran parte, ás novas evidencias atopadas do seu impacto sobre o ecosistema acuático e a súa posible repercusión na calidade de vida do ser humano. En consecuencia, os fármacos xa se consideran contaminantes emerxentes cuxa presencia na auga debe ser debidamente regulada. Actualmente existen metodoloxías robustas que permiten levar a cabo a determinación destes compostos, entre as que destaca a cromatografía líquida acoplada a detectores sensibles. Pero este tipo de técnicas son lentas e requiren tratamentos de mostra exhaustivos; ademáis, xeran unha gran cantidade de residuos debido ao elevado volume de disolventes (principalmente orgánicos) consumidos. As técnicas electroquímicas, pola súa parte, supoñen unha alternativa moi atractiva como consecuencia da elevada sensibilidade e selectividade que ofrecen, sendo capaces de medir tanto en disolucións como en suspensións e, na maior parte dos casos, sen necesidade dun tratamento de mostra previo, o que se relaciona cunha redución do tempo de análise e do volumen de mostra requeridos, non producindo residuos importantes e sendo estes acuosos, menos contaminantes. Desta forma, é posible determinar non só a súa presenza en mostras de auga, senon tamén realizar o control de calidade de produtos farmacéuticos comerciais. Por outra parte, a maior parte das plantas potabilizadoras de auga todavía non teñen metodoloxías axeitadas para poder monitorizar, por un lado, e eliminar, por outro lado, este tipo de contaminantes orgánicos, que son altamente estables. Os procesos de oxidación avanzada permiten desenvolver métodos de degradación destes compostos, xa que involucran a xeración de radicales hidroxilo altamente reativos que permiten fragmentar de forma eficaz calquera tipo de molécula, independentemente da súa estabilidade. Por todo isto, neste proxecto preténdese desenvolver metodoloxías electroanalíticas que permitan tanto detectar e cuantificar como monitorizar o proceso de degradación de contaminantes emerxentes en mostras reais, contribuíndo a preservar a calidade da auga e a aumentar o ciclo de vida dos recursos hídricos deste ben tan escaso en moitas zonas do planeta., In the last decades, the concern of the scientific community about the presence of drugs in water around the world has increased significantly due to the new evidence found of their impact on the aquatic ecosystem and their possible impact on the quality of life of human beings. Consequently, drugs are already being considered emerging pollutants whose presence in water must be properly regulated. Currently there are robust methodologies that allow performing the determination of these compounds, among which liquid chromatography coupled to sensitive detectors stands out. But these types of techniques are slow and require exhaustive sample treatment; furthermore, they generate a large amount of waste due to the high volume of solvents (mostly organic) consumed. Meanwhile, electrochemical techniques represent a very attractive alternative because of the high sensitivity and selectivity they offer, being able to measure both solutions and suspensions without the need for prior sample treatment while reducing both analysis time and sample volume required, not producing significantly polluting residues. In this way, it is possible not only to determine its presence in water samples, but also to perform quality control of commercial pharmaceutical products. On the other hand, most water treatment plants still do not have appropriate methodologies that allow them to both monitor and eliminate this type of organic pollutants, which are higly stable. Advanced oxidation processes permit the development of degradation methods for these compounds, since they involve the generation of higly reactive hydroxyl radicals that effectively fragment any type of molecule, regardless of its stability. Given all the above, the aim of this project is to develop electroanalytical methodologies that allow detecting and quantifying, as well as monitoring the degradation process of emerging pollutants in real samples, contributing to preserve water quality and to increase the life cycle of water resources of this scarce commodity in many areas of the globe., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Disinfection through advance oxidation processes: optimization and application on real wastewater matrices

  • Blanco Canella, Pablo
  • Lama Rodríguez, Gabriela
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
Disinfection is an essential and significant process for water treatment to protect the environment and human beings from pathogenic infections. In this study, disinfection through the generation of hydroxyl (Fenton process (FP)) and sulfate (Fenton-like process (FLP)) radicals was validated and optimized. The optimization was carried out in synthetic water through an experimental design methodology using the bacteria Escherichia coli as a model microorganism. Different variables were evaluated in both processes: precursor concentration (peroxymonosulfate (PMS) and H2O2), catalyst concentration (Fe+2), and pH in the Fenton process. After that, the optimized conditions (FP: 132.36 mM H2O2, 0.56 mM Fe+2 and 3.26 pH; FLP: 3.82 mM PMS and 0.40 mM Fe+2) were applied to real matrices from wastewater treatment plants. The obtained results suggest that both processes are promising for disinfection due to the high oxidant power of hydroxyl and sulfate radicals., Ministerio de Ciencia e Innovación | Ref. PDC2021-121394-I00, Ministerio de Ciencia e Innovación | Ref. PID2020-113667GB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Sustainable removal of antipyrine from wastewater via an eco-friendly heterogeneous electro-Fenton-like process employing Zero-Valent iron nanoparticles loaded activated carbon

  • Tesnim, Dhiss
  • Díez Sarabia, Aida Maria
  • Amor Hédi, Ben
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
This study addresses the growing environmental and health concern associated with pharmaceutical compounds detected in wastewater by employing an innovative and environmentally friendly approach. Polyphenol reducing agents were extracted from palm petiole (PP) using a coffee marker to synthesize zero-valent iron nanoparticles (P-NZVI) in an environmentally sustainable manner. The residual PP materials after extraction were used to prepare an eco-friendly activated carbon (AC). Subsequently, the syntetized P-NZVIwere integrated with AC to form a composite AC-NZVI. After the physical–chemical characterization of the developed materials, AC and AC-NZVI were evaluated as catalysts in a heterogeneous electro-Fenton-like (EFL) process, employing a boron-doped diamond (BDD) as anode and carbon-felt (CF) as cathode to enhance antipyrine (ATP) degradation. This study investigates influential factors such as catalyst dosage, pH, current density, scavengers’ presence and water matrices effect. Results showcase a remarkable 97 % ATP removal efficiency and low energy consumption (EC) of 0.0683 kWh/g over 60 min EFL in deionized water with 1.4 g/L AC-NZVI and at current density of 10 mA/cm2. Quenching experiments emphasize hydroxyl radicals as the predominant species, particularly in acidic conditions. Notably, AC-NZVI exhibits high removal efficiencies even in real wastewater, achieving 87 % ATP removal. The study confirms the recyclability and stability of the AC-NZVI catalyst over five cycles, confirmed by comprehensive analyses, including FTIR, XPS, Raman, and XRD, achieving a mineralization efficiency of 84 % within 3 h. Elucidation of the ATP degradation pathway is accomplished through LC-MS., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED431C-2021–43, Xunta de Galicia | Ref. ED481D-2023/015
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Application of biomaterials in aquatic contaminated environments, Biomateriales para su aplicación en la remediación de ambientes acuáticos contaminados, Biomateriais para a súa aplicación na remediación de ambientes acuáticos contaminados

  • Escudero Curiel, Silvia
The recovery of waste produced in various activities and allowing its return to the productive system within the goal of zero waste and as one of the maxims of the circular economy allows an improvement of both economic and environmental sustainability. These waste, both organic and inorganic, can be used for their application in environmental remediation processes. The presence of emerging pollutants in aquatic environments represents a significant problem given the pernicious effects they generate in living beings and their elimination focuses on new research for their elimination with various technologies such as adsorption and where it is required to obtain new more effective adsorbents . In this thesis project, we intend to develop new biomaterials for the treatment of aquatic environments contaminated with emerging pollutants of diverse nature. For this, it is proposed, on the one hand, to evaluate a mixture of different adsorbent biomaterials (such as agro-industrial waste) as well as the production of different carbonaceous materials obtained by various pretreatments followed by thermal treatments, which will be optimized, of these residues. The new adsorbents will be characterized and the elimination of representative compounds of contamination in polluted effluents will be investigated both individually and combined, relying on tools such as the design of experiments. The benignity of the proposed remediation strategies will be determined through toxicity analysis. The operating conditions will be optimized and the laboratory scale system will be studied both in discontinuous and continuous treatments, which will allow the simulation of the process through computer tools and facilitate its scaling., La valorización de residuos producidos en diversas actividades y que permita su retorno al sistema productivo dentro del objetivo de residuos cero y como una de las máximas de la economía circular permite una mejora de la sostenibilidad tanto económica como medioambiental. Dichos residuos, tanto orgánicos como inorgánicos, pueden ser empleados para su aplicación en procesos de remediación ambiental. La presencia de contaminantes emergentes en ambientes acuáticos representa una significativa problemática dados los efectos perniciosos que estos generan en los seres vivos y su eliminación focaliza nuevas investigaciones para su eliminación con diversas tecnologías como es la adsorción y donde se requiere la obtención de nuevos adsorbentes más eficaces. En el presente proyecto de Tesis se pretenden desarrollar nuevos biomateriales para el tratamiento de ambientes acuáticos contaminados con contaminantes emergentes de naturaleza diversa. Para ello, se propone, por una parte, evaluar una mezcla de diferentes biomateriales adsorbentes (tales como residuos agroindustriales) así como la producción de diferentes materiales carbonosos obtenidos mediante diversos pretratamientos seguidos de tratamientos térmicos, que se optimizarán, de estos residuos. Los nuevos adsorbentes se caracterizarán y se investigará la eliminación de compuestos representativos de contaminación en efluentes contaminados tanto a nivel individual como combinados apoyándose en herramientas como el diseño de experimentos. Se determinará la benignidad de las estrategias de remediación propuestas mediante análisis de toxicidad. Se optimizarán las condiciones de operación y se estudiará el sistema a escala laboratorio tanto en tratamientos en discontinuo como en continuo, lo que permitirá la simulación del proceso mediante herramientas informáticas y facilitará su escalado., A recuperación de residuos producidos en diversas actividades e permitir o seu regreso ao sistema produtivo dentro da meta de cero residuos como unha economía circular superior permite unha mellora tanto na sustentabilidade económica e ambiental. Estes residuos, tanto orgánicos como inorgánicos, pódense utilizar para a súa aplicación nos procesos de remediación ambiental. A presenza de contaminantes emerxentes en ambientes acuáticos representa un problema significativo, dado os efectos destrutivos que xeran nos organismos vivos ea súa eliminación céntrase máis investigacións para eliminación con varias tecnoloxías, como a adsorção e onde a obtención de novos adsorbentes máis eficaz require . No presente proxecto de tese pretende desenvolver novos biomateriais para o tratamento de contaminados con contaminantes de varias naturezas ambientes acuáticos emerxente. Para estes efectos, propón-se, por unha banda, para avaliar unha mestura de diferentes biomateriais adsorbentes (tales como residuos agro-industriais) ea produción de diferentes materiais carbonáceos obtidos por varios pre-tratamentos seguido tratamentos de calor a ser optimizado, destes residuos. Novos adsorbentes caracterizado e retirada de compostos representativos de contaminación contaminado tanto individualmente e efluentes combinados foron investigadas como ferramentas baseándose na concepción de experiencias. A benignidade das estratexias de remediación propostas determinaranse mediante a análise de toxicidade. as condicións de funcionamento foron optimizados eo sistema será estudada en ambos escala tratamento de lote e de laboratorio continuo, permitindo que a simulación do proceso utilizando ferramentas e facilitar o seu dimensionamento., Agencia Estatal de Investigación | Ref. CTM 2017-87326-R, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431C 2021-43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Pushing the operational barriers for g-C3N4: a comprehensive review of cutting-edge immobilization strategies

  • Fernández Sanromán, Antía
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
This comprehensive review explores recent advancements in immobilization strategies for graphitic carbon nitride (g-C3N4), a metal-free photocatalyst that has gained significant attention for its optical and physicochemical properties comparable to traditional photocatalysts like TiO2. However, a critical challenge regarding their application has emerged from the difficulty of its recovery due to its powdery nature. Therefore, several alternatives are being explored to immobilize this material, facilitating its recovery and reuse. This review systematically categorizes various physical and chemical immobilization techniques, providing an in-depth analysis of their advantages, drawbacks, and applications. Techniques such as encapsulation, electrospinning, casting, and coating, along with their adaptations for g-C3N4, are thoroughly examined. Additionally, the impact of these strategies on enhancing the photocatalytic efficiency and operational stability of g-C3N4, particularly in environmental applications, is also assessed. Thus, this review aims to provide valuable insights and guide future research in the realms of photocatalysis and environmental remediation. The review contributes to the understanding of how immobilization strategies can optimize the performance of g-C3N4, furthering its potential applications in sustainable and efficient environmental solutions., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED431C 2021-43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Zn-MIL53(Fe) as an electro-Fenton catalyst: application in organic pollutant degradation and pathogen inactivation

  • Terrón Hernández, Daniel
  • Holgado Vázquez, J.P.
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
In this study, the potential of a bimetallic Metal-Organic Framework Zn-MIL53(Fe) for electro-Fenton catalysis was evaluated. After the material characterisation, its catalytic activity was validated in Fenton reaction to degrade a model organic pollutant: Rhodamine B. After that, the evaluation of Zn-MIL53(Fe) as electro-Fenton catalyst was performed and improved outcomes were reached by electro-Fenton regarding anodic oxidation. Then, electro-Fenton treatment optimisation was carried out using response surface methodology assays considering different catalyst dosages (7.2–43.2 mg), current intensities (5–45 mA) and treatment time (30–90 min) in a volume of 0.1 L. Under optimal conditions, a degradation rate over 90 % for Fluoxetine and Sulfamethoxazole in synthetic wastewater was achieved within 90 min, using graphite sheet as anode and nickel foam as cathode (25 mA), with a catalyst dosage of 43.2 mg in a volume of 0.1 L. Additionally, its application in the pathogen inactivation was evaluated using different gram-negative and gram-positive bacteria. Complete eliminations of both types of bacteria were reached in 5 min using the optimal conditions. In the end, Zn-MIL53(Fe) was proven as a reusable material, capable of performing 3 complete cycles of electro-Fenton treatment for both types of pollutants bacteria and pharmaceuticals, which makes it a promising candidate for more efficient wastewater treatment applications which involve the Fenton reaction., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED431C2021-43, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Advancing in wastewater treatment using sustainable electrosorbents

  • Fernández Sanromán, Antía
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
Separation and purification processes using adsorption are becoming more and more popular, with excellent benefit-cost ratio and high effluent quality. However, it is important to recognize the requirement for new adsorbents and to avoid the generation of contaminated adsorbents that can have a severe impact on the environment. Thus, underscoring the need for sustainable approaches in the management and regeneration of these materials. To improve this process, two challenges are being approached nowadays: the synthesis of adsorbents from wastes in a circular economy model and its integration with electrochemistry (electrosorption) to enhance the adsorbent capacity and its regeneration by green electricity. This review summarizes the key studies and trends related to electrosorption (60 articles) and its application in the removal of different pollutants from wastewater. It must be highlighted that around 33% of them, detailed the synthesis of green electrosorbents with application in the removal of inorganic and organic pollutants. In addition, other studies with non-sustainable electrodes (approximately 23%) describe the last trend to improve electrosorbent characteristics. From our standpoint, it is crucial to delve into this research, particularly regarding their application to green electrosorbents to enhance the efficiency of electrosorption processes, a potential breakthrough in the field., Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED431C 2021-43, Agencia Estatal de Investigación | Ref. PRE2021-098540, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

From waste to resource: valorization of lignocellulosic agri-food residues through engineered hydrochar and biochar for environmental and clean energy applications—a comprehensive review

  • Escudero Curiel, Silvia
  • Giráldez Rodríguez, Alba
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Agri-food residues or by-products have increased their contribution to the global tally of unsustainably generated waste. These residues, characterized by their inherent physicochemical properties and rich in lignocellulosic composition, are progressively being recognized as valuable products that align with the principles of zero waste and circular economy advocated for by different government entities. Consequently, they are utilized as raw materials in other industrial sectors, such as the notable case of environmental remediation. This review highlights the substantial potential of thermochemical valorized agri-food residues, transformed into biochar and hydrochar, as versatile adsorbents in wastewater treatment and as promising alternatives in various environmental and energy-related applications. These materials, with their enhanced properties achieved through tailored engineering techniques, offer competent solutions with cost-effective and satisfactory results in applications in various environmental contexts such as removing pollutants from wastewater or green energy generation. This sustainable approach not only addresses environmental concerns but also paves the way for a more eco-friendly and resource-efficient future, making it an exciting prospect for diverse applications., Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED431C 2021-43, Universidade de Vigo
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Sustainable regeneration of a honeycomb carbon aerogel used as a high-capacity adsorbent for Fluoxetine removal

  • Escudero Curiel, Silvia
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Pharmaceuticals and personal care products (PPCPs) harm ecosystems and human health. The focus is now being put on regulating discharges at wastewater treatment plants (WWTPs). Stressful and lonely lifestyles, accentuated by the COVID-19 outbreak, have led to an increase in the consumption of antidepressants, particularly in the form of Fluoxetine (FLX). A highly effective process for the removal of PPCPs is of key importance for the economic feasibility of the process in the industry. Consequently, a high-capacity adsorption/regeneration system is crucial to solving this problem. In this study, the removal of FLX by an adsorption process and the subsequent in situ regeneration of the adsorbent was evaluated in successive cycles. NQ40 honeycomb 3D carbon aerogel was employed as a high-capacity adsorbent, obtaining uptakes of 125.24 mg/g. A detailed study of NQ40 and the mechanisms governing the adsorption process was conducted, with chemisorption and intra-particle diffusion playing the main role. A Fenton and a Fenton-like process with peroxymonosulfate (PMS) were evaluated for regeneration purposes, finding hydrogen peroxide to be more efficient in removing a high concentration of FLX. A regeneration capacity of 98.85% was achieved in the first NQ40 adsorption-regeneration cycle and 98.04% in the second one, without negatively affecting the structural characteristics of NQ40. Therefore, with a high porosity, low density, high biocompatibility, high chemical stability and 3D structural stability, this aerogel is at the forefront of novel high-capacity adsorbent materials for industrial-scale use in WWTPs., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED431C 2021-43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Ultraviolet-based heterogeneous advanced oxidation processes as technologies to remove pharmaceuticals from wastewater: An overview

  • Meijide Fernandez, Jessica
  • Lama Rodríguez, Gabriela
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Dunlop, Patrick S. M.
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, Contaminants of emerging concern including pharmaceuticals and personal care products are increasingly detected at low concentrations in surface waters. Given the associated toxicity of these compounds, there is the potential for significant impacts on aquatic life and the food chain. Since most pharmaceuticals are not biodegradable, they cannot be removed by secondary treatment processes in conventional wastewater treatment plants. Therefore, the development of alternative treatment methods plays a critical role in the removal of pharmaceuticals. Energy consumption is a key factor in technology selection, and the use of solar energy may help minimise operating costs. Thus, this work provides a comprehensive review of relevant research published between 2016 and 2021 targeting the removal of active pharmaceutical ingredients using ultraviolet processes, including photo-Fenton, photocatalysis and photoelectrocatalysis. While the focus remains on the development of novel catalysts and some efforts have been made to demonstrate the reuse of these materials for multiple cycles, there is little work aimed at scaling up the systems or investigating their efficacy in real water matrices to test the potential beyond the laboratory setting. The review concludes with some recommendations for future studies, highlighting the importance of comparing technologies in terms of life cycle assessment, energy use, and financial considerations to provide a holistic understanding of the role that these technologies can play in removing trace pharmaceutical compounds from wastewater., Ministerio de Ciencia e Innovación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED481B 2018/096
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Strategies to improve the removal of organic micro-pollutants by synergetic technologies, Estrategias para mejorar la eliminación de micro contaminantes orgánicos mediante tecnologías sinérgicas, Estratexias para mellorar a eliminación de micro-contaminantes orgánicos por tecnoloxías sinérxicas

  • Ouiriemmi , Imen
In the aquatic environment, organic micro-pollutants (OMPs) can be defined as anthropogenic organic chemicals that occur, due to human activities, well above a potential natural background level, but with concentrations remaining at trace levels (ranging from several ng L-1 to a few mg L-1). If improperly dealt with, effluents contaminated with OMPs can generate a great environmental and health problem. Therefore, efficient treatment techniques of these pollutants are required. Among numerous techniques used for OMPs removal, adsorption represents one of the cheapest alternatives depending on the adsorbent source. This process is characterized by ease of operation, flexibility, and simplicity of the design. Furthermore, by application of this method, a rapid response is possible to manipulate catastrophic environmental problems. Recently, much more advanced techniques, so-called advanced oxidation processes (AOPs), have attracted great interest due to their high efficiency in the removal of OMPs from contaminated wastewaters.These processes are based on the generation of powerful radicals like &#9679;OH or &#9679; SO4. In this thesis, different AOPs will be used for the treatment of effluents contaminated with OMPs either alone or in combination with adsorption. The synergetic effects of AOPs and adsorption will be evaluated. Thus, using adsorption as a pre-concentration step for AOPs can be a solution to render these latter processes more amenable and efficient for the treatment of large volumes of wastewater at low concentration. On the other hand, using AOPs for adsorbent regeneration can solve secondary pollution caused by the disposal of exhausted adsorbents. During the treatment of contaminated effluents, operational conditions will be controlled and optimized to obtain the maximum removal of the pollutant and even its total mineralization., En el ambiente acuático, los micro contaminantes orgánicos (OMP) pueden definirse como químicos orgánicos antropogénicos que se producen, debido a actividades humanas, en concentraciones muy por encima de un nivel base natural, aunque permanecen en niveles de trazas (que varían desde varios ng L-1 a unos pocos mg L-1). Si no se trata adecuadamente, los efluentes contaminados con OMP pueden generar un gran problema ambiental y de salud. Por lo tanto, se requieren técnicas de tratamiento eficientes de estos contaminantes. Entre las numerosas técnicas utilizadas para la eliminación de OMP, la adsorción representa una de las alternativas más baratas según el material adsorbente. Este proceso se caracteriza por la facilidad de operación, flexibilidad y simplicidad del diseño. Además, mediante la aplicación de este método, es posible una respuesta rápida para manipular problemas ambientales catastróficos. Recientemente, técnicas mucho más avanzadas, los llamados procesos de oxidación avanzada (AOP), han atraído un gran interés debido a su alta eficiencia en la eliminación de OMP de aguas residuales contaminadas. Estos procesos se basan en la generación de radicales potentes como &#9679; OH o &#9679; SO4. En esta tesis, se utilizarán diferentes AOP para el tratamiento de efluentes contaminados con OMP, ya sea solos o en combinación con adsorción. Se evaluarán los efectos sinérgicos de los AOP y la adsorción. Por lo tanto, el uso de la adsorción como un paso de preconcentración para AOP puede ser una solución para hacer que estos últimos procesos sean más adecuados y eficientes para el tratamiento de grandes volúmenes de aguas residuales a baja concentración. Por otro lado, el uso de AOP para la regeneración de adsorbentes puede resolver la contaminación secundaria causada por la eliminación de adsorbentes agotados. Durante el tratamiento de efluentes contaminados, las condiciones operativas se controlarán y optimizarán para obtener la máxima eliminación del contaminante e incluso su mineralización total., No medio acuático, os micro-contaminantes orgánicos (OMPs) poden definirse como produtos químicos orgánicos antropoxénicos que se producen, debido ás actividades humanas, moi por encima dun nivel base natural, inda que permanecen con concentracións que quedan en niveis moi baixos (que varían de varios ng L-1 a algúns mg L-1). Se se tratan de forma inadecuada, os efluentes contaminados con OMP poden xerar un gran problema ambiental e de saúde. Por iso, son necesarias técnicas de tratamento eficientes destes contaminantes. Entre as numerosas técnicas empregadas para a eliminación de OMP, a adsorción representa unha das alternativas máis baratas dependendo do material adsorbente. Este proceso caracterízase pola facilidade de operación, flexibilidade e sinxeleza do deseño. Ademais, mediante a aplicación deste método, unha resposta rápida é posible para manipular problemas ambientais catastróficos. Recentemente, técnicas moito máis avanzadas, os chamados procesos de oxidación avanzada(AOPs), teñen un gran interese debido á súa alta eficiencia na eliminación de OMP de augas residuais contaminadas. Estes procesos baséanse na xeración de radicais poderosos como &#9679; OH ou &#9679; SO4. Nesta tese empregaranse distintos AOP para o tratamento de efluentes contaminados con OMP só ou en combinación con adsorción. Avaliaranse os efectos sinérxicos dos AOP e da adsorción. Así, empregar a adsorción como paso previo á concentración para os AOP pode ser unha solución para facer estes últimos procesos máis amables e eficientes para o tratamento de grandes volumes de augas residuais a baixa concentración. Por outra banda, empregar AOP para a rexeneración adsorbente pode resolver a contaminación secundaria causada pola eliminación de adsorbentes esgotados. Durante o tratamento de efluentes contaminados controlaranse e optimizaranse as condicións operativas para obter a máxima eliminación do contaminante e incluso a súa mineralización total., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C2021/43
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Zn-MIL53(Fe) as an electro-Fenton catalyst: Application in organic pollutant degradation and pathogen inactivation

  • Terrón, D.
  • Holgado Vázquez, J. P
  • Rosales, E
  • Sanromán, M. A
  • Pazos, M
In this study, the potential of a bimetallic Metal-Organic Framework Zn-MIL53(Fe) for electro-Fenton catalysis was evaluated. After the material characterisation, its catalytic activity was validated in Fenton reaction to degrade a model organic pollutant: Rhodamine B. After that, the evaluation of Zn-MIL53(Fe) as electro-Fenton catalyst was performed and improved outcomes were reached by electro-Fenton regarding anodic oxidation. Then, electro-Fenton treatment optimisation was carried out using response surface methodology assays considering different catalyst dosages (7.2–43.2 mg), current intensities (5–45 mA) and treatment time (30–90 min) in a volume of 0.1 L. Under optimal conditions, a degradation rate over 90 % for Fluoxetine and Sulfamethoxazole in synthetic wastewater was achieved within 90 min, using graphite sheet as anode and nickel foam as cathode (25 mA), with a catalyst dosage of 43.2 mg in a volume of 0.1 L. Additionally, its application in the pathogen inactivation was evaluated using different gram-negative and gram-positive bacteria. Complete eliminations of both types of bacteria were reached in 5 min using the optimal conditions. In the end, Zn-MIL53(Fe) was proven as a reusable material, capable of performing 3 complete cycles of electro-Fenton treatment for both types of pollutants bacteria and pharmaceuticals, which makes it a promising candidate for more efficient wastewater treatment applications which involve the Fenton reaction., The authors acknowledge the financial support from this research that has been financially supported by MCIU/AEI/10.13039/501100011033 Project PID2020-113667 GB-I00 and Xunta de Galicia, and the European Regional Development Fund (ED431C 2021-43) and the Universidade de Vigo/CRUE-CISUG for the open access charge funding. The authors also acknowledge the CSIC-US for the characterisation analyses., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Application of novel Zn-MIL53(Fe) for removal of micropollutants using an activated peroxymonosulphate system

  • Terrón, D.
  • Holgado Vázquez, J. P
  • Giráldez, Alba
  • Rosales, Emilio
  • Sanromán, Ángeles
  • Pazos, M.
Novel zinc-doped Metal-Organic Framework based on MIL53(Fe) (Zn-MIL53(Fe)) has been successfully synthesised in one-step, exhibiting dual applications as adsorbent and catalyst. Initially, the adsorption capacity of MIL53(Fe) and Zn-MIL53(Fe) for removing Rhodamine B was assessed through kinetic and isotherm studies. The bimetallic variant exhibited superior performance, showcasing enhanced adsorption capabilities, particularly in the context of its physical interaction under natural pH. After that, the catalytic activity of both synthesised materials was evaluated to generate sulphate radicals by activating PeroxyMonoSulphate (PMS). It was also demonstrated that Zn-MIL53(Fe) exhibited the best catalytic activity being optimised using response surface methodology for Rhodamine B degradation (0.11 mM PMS and 43.2 mg Zn-MIL53(Fe)). Under optimal conditions, favourable outcomes were attained, facilitating the degradation of Rhodamine B, Fluoxetine, and Sulfamethoxazole by 93, 99, and 75 %, respectively. Furthermore, the operational stability of the Zn-MIL53(Fe) was verified, as it remains structurally and catalytically intact after different cycles., The authors acknowledge the financial support from this research that has been financially supported by MCIN / AEI /10.13039/501100011033 Project PID2020-113667GB-I00 and Xunta de Galicia, the European Regional Development Fund (ED431C 2021-43) and the Universidade de Vigo/CRUE-CISUG for the open access charge funding. The authors also acknowledge the CSIC-US and Dr. J.P. Holgado-Vázquez for the contribution of XPS and BET analysis., Peer reviewed