Pasar al contenido principal

BIODIVERSITY RESTORATION AND CONSERVATION OF INLAND WATER ECOSYSTEMS FOR ENVIRONMENTAL AND HUMAN WELL-BEING

PCI2022-132941

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Afrontar las Prioridades de Nuestro Entorno
Subprograma Subprograma Estatal de Internacionalización
Convocatoria Proyectos Programación Conjunta Internacional
Año convocatoria 2022
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 28
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Decorated electrode surfaces with nanostructures and metal-organic frameworks as transducers for sensing

  • Caruncho Pérez, Sara
  • Díez Sarabia, Aida Maria
  • Prado Comesaña, Ana M.
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
In this study, several materials are presented as modifiers of the screen-printed carbon electrodes with the aim of developing new sensing platforms for the voltammetric analysis of drugs. Specifically, Clotiapine and Sulfamethoxazole were selected as models for antipsychotics and antibiotics, respectively. Different nanostructures were studied as modifiers, including both transition metals and carbon-based materials. Moreover, biochar and two metal-organic frameworks (MOFs) were tested as well. The NH2-MIL-125(Ti) MOF showed an 80% improvement in the analytical signal of Sulfamethoxazole, but it partially overlapped with an additional signal associated with the loss of the MOF ligand. For this reason, several immobilization strategies were tested, but none of them met the requirements for the development of a sensor for this analyte. Conversely, carbon nanotubes and the NH2-MIL-101(Fe) MOF were successfully applied for the analysis of Clotiapine in the medicine Etumine®, with RSD below 2% and relative errors that did not exceed 9% in any case, which demonstrates the precision and accuracy achieved with the tested modifications. Despite these promising results, it was not possible to lower the limits of detection and quantification, so in this sense further investigation must be performed to increase the sensitivity of the developed sensors., Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Novel Fe-Ti nanoparticles synthesized in deep eutectic solvents for enhanced photo-electro-Fenton processes: Synergistic effects and environmental applications

  • Puga Pazo, Antón
  • Meijide Fernandez, Jessica
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Rosales Villanueva, Emilio
An innovative titanium-magnetite (Fe-Ti) catalyst was developed using a production strategy based on water-free solvents such as deep eutectic solvents (DES) for the removal of persistent pollutants. The prepared catalyst was applied in electro-Fenton and photo-electro-Fenton processes. To this end, a new cell design with electrodes based on conductive materials was developed using 3D printing in two different electrochemical cells configurations: vertical electrode configuration (VEC) and horizontal electrode configuration (HEC). The HEC showed good performance attaining a yield hydrogen peroxide production of 20 mg⋅L1 and being able to operate in electro-Fenton degradation batch assays for the removal of the drugs (Antipyrine and Lissamine Green B). Then, the heterogeneous bimetallic catalyst (BC-FeTi) was tested and compared with the monometallic Fe catalyst (MCFe). The results with both catalysts showed a synergistic effect combining electrochemical oxidation and Fenton reaction, promoting the best removal of the target pollutants. Subsequently, the contribution of UV radiation was evaluated with BC-FeTi, achieving that more than 80 % of both pollutants were removed in 80 min by the photo- Fenton process, confirming the high affinity of oxidizing free radicals for high molecular weight organic molecules. Finally, the simultaneous application of electro- and photo-oxidation (photo-electro-Fenton) significantly improved the removal of the target contaminants from the aqueous solution, achieving complete removal in 50 and 80 min for Lissamine Green B and Antipyrine, respectively. The stability and reusability of BC-FeTi and 3Dprinted electrodes were achieved in five successive working cycles, with negligible loss of activity compared to new catalysts, which achieved greater than 99 % removal after five consecutive runs. Leaching of iron and titanium from the catalyst evaluated throughout the cycles, was low, totalling 2.7 and 4.5 % at the end of the fifth cycle., Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED481B 2018/096, Xunta de Galicia | Ref. ED431C 2021-43, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Synthesis and characterization of eco-friendly cathodic electrodes incorporating nano Zero-Valent iron (NZVI) for the electro-fenton treatment of pharmaceutical wastewater

  • Tesnim, Dhiss
  • Díez Sarabia, Aida Maria
  • Ben Amor, Hédi
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
The electro-Fenton process has the potential to be an efficient effluent treatment method, contingent on effective process optimization. It relies on two critical components: efficient in-situ H2O2 generation and the integration of highly reactive heterogeneous catalysts into electrode synthesis. In this study, several cathodic electrodes were synthesized, including those using zero-valent iron nanoparticles (P-NZVI), zero-valent iron nanoparticles sup ported on activated carbon (AC-NZVI), and El Hamma Bentonite clay loaded with zero-valent iron nanoparticles (HB-NZVI). These electrodes were fabricated using sustainable, straightforward methods and subjected to thorough physicochemical and electrochemical characterization. The goal of this research was to develop environmentally friendly cathodes, employing either pressed catalyst techniques or supporting the catalyst on carbon felt (CF) or titanium foil. These electrodes were evaluated within a heterogeneous electro-Fenton-like process, with a boron-doped diamond (BDD) anode, targeting the efficient degradation of the pharmaceutical pollutant Antipyrine (ATP). Among the tested configurations, the AC-NZVI/CF electrode demonstrated the highest degradation efficiency. Key experimental parameters, such as pH, current density, and water matrices, were systematically studied to optimize the process. Under optimal conditions (pH 7, current density of 55 mA A/cm2), 80 % mineralization of a 40 mg/L ATP solution was achieved within 150 min, with an energy con sumption of just 0.3502 kWh/g. The performance of the AC-NZVI/CF electrode remained stable when applied to real wastewater and after five consecutive cycles. Comprehensive analyses using FTIR, SEM-EDS, and XPS confirmed the stability and recyclability of the electrode, showcasing its potential for sustainable wastewater treatment applications., Agencia Estatal de Investigación | Ref. PID2020-113667 GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2021-43, Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Development of eco-friendly and cost-effective electrochemical sensor for the simultaneous detection of 4-aminophenol and paracetamol in water

  • Fernández Sanromán, Antía
  • Ben Messaoud, Najib
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Barbosa Queirós, Raquel
Pharmaceutical waste contamination is an increasing environmental concern due to its persistence and potential adverse impact on aquatic ecosystems. Among these contaminants, paracetamol (PA) and 4-aminophenol (4-AP) are prevalent in urban wastewater due to their widespread use. Accurate detection of these compounds is essential for environmental risk assessment and mitigation strategies. In this study, an electrochemical sensor based on carbon screen-printed electrodes (C-SPEs) modified with functionalized carbon nanofibers (CNF-COOH) was developed for the simultaneous detection of PA and 4-AP. The electrochemical performance of commercially available gold and carbon-based SPEs was evaluated, demonstrating superior sensitivity for PA and 4-AP with CSPEs. The incorporation of CNF-COOH improved electron transfer and increased surface area, enhancing both sensitivity and selectivity by facilitating stronger interactions with the target analytes. The novel C-SPE/CNFCOOH sensor achieved detection limits of 0.002 mM for PA and 0.007 mM for 4-AP. It was successfully tested in real freshwater samples, demonstrating high accuracy even in complex matrices. This innovative methodology provides a rapid, cost-effective, and portable analytical tool for routine monitoring of pharmaceutical contaminants, enabling more accurate environmental risk assessments and supporting the implementation of more efficient management strategies., Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. TED2021-129590A-I00, Agencia Estatal de Investigación | Ref. PRE2021-098540
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Nano-zero-valent particles synthesized with agroindustry wastes for pesticide degradation under real conditions

  • Diez Sarabia, Aida Maria
  • Fernandes, Virgínia Cruz
  • Moreira, Manuela M.
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Albergaria, T.
  • Delerue-Matos, C.
Nano-zero-valent particles (NZVP) had exhibited high degradation activity. NZVP synthesized from agroindustry residues align with circular economy principles. They generate hydroxyl radicals (4.6 µM) that effectively degraded chlorpyrifos-methyl pesticide under real conditions. Bimetallic NZVP, specifically NZVP-Fe:Mn and NZVP-Fe:Ag, show superior pesticide degradation. The metal ratio within NZVP influences their activity (optimal at 0.12:0.12 mM and 0.12:0.19 mM for respectively, NZVP-Fe:Mn and NZVP-Fe:Ag). NZVP characterization includes TEM, SEM-EDS, PZC, FTIR, XRD, and electrochemical analysis, confirming their acid nature, favorable electrochemical behavior, and uniform metal distribution. The impact of different natural extracts on NZVP synthesis and pesticide degradation was explained through extensive extract characterization, revealing the presence of altering pro-oxidants and scavenger species. Blueberry pruning extract yields the highest pesticide degradation (85% in 5 min) due to its stronger antioxidant activity and lower scavenger compound content. NZVP demonstrates efficacy across various pH ranges. Real wastewater samples were treated under optimal conditions, resulting in a pesticide degradation efficiency of approximately 60% within 5 min. The most effective approach for enhancing the treatment process involved the sequential addition of reagents, as opposed to the conventional method of increasing reagent concentration, Xunta de Galicia | Ref. ED481B 2019/091, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50006/2020, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50006/2020, Fundação para a Ciência e a Tecnologia | Ref. LA/P/0008/2020, Ministerio de Ciencia e Innovación | Ref. PCI2022-132941, Universidade de Vigo/CISUG, Fundação para a Ciência e a Tecnologia | Ref. CEECIND/02702/2017
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Continuous treatment of diethyl hexyl and dibutyl phthalates by fixed-bed reactor: comparison of two esterase bionanocomposites

  • Balci, Esin
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • Sofuoglu, Aysun
  • Sanromán Braga, María Ángeles
Financiado para publicación en acceso aberto: Universidade de Vigo/CISUG, The removal of Diethyl hexyl phthalate (DEHP) and Dibutyl phthalate (DBP) is of great importance due to their potential adverse effects on the environment and human health. In this study, two bionanocomposites prepared by immobilization of Bacillus subtilis esterase by crosslinking to halloysite and supported in chitosan and alginate beads were studied and proposed as a green approach. The esterase immobilization was confirmed by physical–chemical characterization. Bionanocomposite using chitosan showed the best degradation levels in batch tests attaining complete degradation of DBP and around 90% of DEHP. To determine the operational stability and efficiency of the system, two fixed bed reactors filled with both bionanocomposites were carried out operating in continuous mode. Chitosan based bionanocomposite showed the best performance being able to completely remove DBP and more than 85% of DEHP at the different flowrates. These results proved the potential of these synthesized bionanocomposites to effectively remove Phthalic Acid Esters., Xunta de Galicia | Ref. ED431C 2021-43, Agencia Estatal de Investigación | Ref. PCI2022-132941
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Fluoride-doped TiO2 photocatalyst with enhanced activity for stable pollutant degradation

  • Diez Sarabia, Aida Maria
  • Núñez, Iván
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Kolen’ko, Yury V.
Fluoride-doped TiO2 (F-TiO2) was synthesized by an efficient and simple one-step synthesis and successfully used for the UV-photo-degradation of the toxic and stable pollutants methylene blue (MB) and bisphenol A (BPA). Initially, the synthesized catalyst was characterized and compared to untreated TiO2 (P25 Degussa) by different physical–chemical analyses such as XRD, band gap calculation, SEM, EDS, FITR, ECSA, or EIS. F-TiO2 defeated commercial TiO2, and almost complete pollutant removal was achieved within 30 min. The energy consumption was reduced as a result of the suitable reactor set-up, which reduced light scattering, and by the application of a long-pulse radiation procedure, where the lamp was switched off during periods where the radical degradation continued. This enhanced the overall photocatalysis process performance. Under these conditions, 80% of MB removal was attained within 15 min radiation with an energy consumption of only 0.070 Wh min−1, demonstrating a much better efficiency when compared to previously reported data. The catalyst was reusable, and its performance can be improved by the addition of H2O2. The results were validated by BPA degradation and the treatment of real wastewaters with both pollutants. The results were so encouraging that a scale-up reactor has been proposed for future studies., Xunta de Galicia | Ref. ED481B 2019/091, Xunta de Galicia | Ref. ED431C 2021-43, Ministerio de Ciencia e Innovación | Ref. PCI2022-132941, Ministerio de Ciencia e Innovación | Ref. PID2020- 113667GB-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Application of deep eutectic solvents (DES) for the synthesis of iron heterogeneous catalyst: application to sulfamethoxazole degradation by advanced oxidation processes

  • Puga Pazo, Antón
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
The development of novel approaches to the remotion of pharmaceuticals in wastewater is a subject of concern due to their effect on living beings and the environment. Advanced oxidation processes and the use of relevant catalysts are feasible treatment alternatives that require further development. The development of suitable heterogeneous catalysts is a necessity. This work proposes the synthesis of an iron catalyst in a deep eutectic solvent (Fe-DES) composed of choline chloride and citric acid, which was physically and chemically characterized using SEM-EDS and TEM, FTIR, RAMAN, XRD and XPS. The characterisation confirmed the presence of iron in the form of hematite. Fe-DES was shown to be a multipurpose catalyst that can be applied in the removal of sulfamethoxazole as a reagent in the Fenton and electro-Fenton processes and as an activator of peroxymonosulfate (PMS) processes. After testing the catalyst with the aforementioned techniques, the best result was achieved by combining these processes in an electro-PMS, with great efficiency achieved by dual activation of the PMS with the catalyst and electric field, attaining total elimination at natural pH in 90 min. Furthermore, the degradation was confirmed by the detection of short-chain carboxylic acids (oxalic, succinic, and acetic) and reduction in toxicity values. These results confirm the suitability of Fe-DES to degrade high-priority pharmaceutical compounds., Xunta de Galicia y FEDER | Ref. ED431C 2021-43, Ministerio de Ciencia e Innovación | Ref. PCI2022-132941, Ministerio de Ciencia e Innovación | Ref. PDC2021-121394-I00
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Efficient electro-assisted adsorption of pharmaceuticals by PAN-encapsulated gorse biochar

  • Bernárdez Rodas, Nuria
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
The limitations of conventional adsorption processes and the operational challenges of powdered adsorbents underscore the need for strategies that enhance pollutant removal efficiency, and enable the development of easily handled and recoverable materials. In this study, gorse-derived biochar (BG) was evaluated as an effective adsorbent for pharmaceutical removal due to its high surface area, hydrophobic nature, and surface charge distribution. Adsorption was mainly driven by π-π and hydrophobic interactions. In the case of sulfamethoxazole, the elimination efficiency increased from 43.83 % under conventional adsorption to 98.37 % when an electro-assisted adsorption process was applied. This improvement was preserved after immobilizing the BG in a polyacrylonitrile matrix (PAN-BG), with no significant loss of performance compared to the free material. Kinetic analysis suggested predominantly physical adsorption mechanisms favored by the electric field, with electro-assisted processes reporting greater efficiency, reusability and stability through the regeneration of active sites over 6 cycles. Likewise, a salting-out effect was observed when evaluating the ionic strength of PAN-BG in the presence of an electric field. Finally, the results obtained in a continuous-flow PAN-BG electro-assisted adsorption system demonstrated the applicability of the process at a larger scale. In addition, steady-state kinetic analysis, modeled using the Langmuir-Hinshelwood approach, provided insight into the joint contribution of adsorption and degradation, offering a deeper understanding about the behavior of the system. Overall, these results highlight the potential of electro-assisted adsorption processes for sustainable treatments of contaminated water, as well as the viability and scalability of biochars derived from forest residues immobilized in polymer matrices as electrosorbent materials., Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2025/47, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Electrochemistry solving problems in water disinfection: Direct voltammetric monitoring of pyocyanin from Pseudomonas aeruginosa

  • Caruncho Pérez, Sara
  • Giráldez Rodríguez, Alba
  • Terrón Hernández, Daniel
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • González Romero, Elisa
This work presents the development of a voltammetric methodology for the direct determination of the exclusive pigment pyocyanin generated by Pseudomonas aeruginosa using cheap, disposable unmodified screen-printed carbon electrodes. The redox processes involved in phenazine transformations in different media were studied using cyclic voltammetry. After confirming that the transport of matter is governed by diffusion, the diffusion coefficients of the oxidized species were inferred. To study samples of the bacteria square wave voltammetry was selected, and the most critical instrumental parameters were optimized before obtaining a calibration that covers a dynamic linear range from 0.29 to 11.65 μM, with a limit of detection of 0.09 μM. To verify that the method is applicable to real cases, the concentration of pyocyanin in samples of the bacteria was first quantified without the need to pretreat or dilute the sample. After that, the monitoring of bacterial growth was carried out using pH, conductivity and turbidity control measurements to support the interpretation of electrochemical measurements. Lastly, the voltammetric method was also applied to evaluate the evolution of the disinfection of synthetic wastewater containing the bacteria. For this purpose, a bimetallic metal-organic framework with antimicrobial properties was used to reduce the viable population to more than half, thus achieving the same efficiency as anodic oxidation but without the need to apply a current intensity. Furthermore, by combining both processes in an electro-Fenton assay, it was possible to completely eliminate the viable population in the first 2 min, in agreement with the electrochemical findings, confirming that the voltammetric method is valid for the study of the bacteria behavior., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Iron metal-organic framework nanofiber membrane for the integration of electro-Fenton and effective continuous treatment of pharmaceuticals in water

  • Lomba Fernandez, Bárbara
  • Fernández Sanromán, Antía
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Rosales Villanueva, Emilio
In this study, an iron metal-organic framework (Fe-MOF) was synthesized and immobilized by electrospinning technique with the objective of obtaining a membrane composed of nanofibers of this material (Fe-MOF nanofiber membrane). The characterization performed by XRD, TEM, SEM, EDS mapping and FTIR confirmed the correct synthesis of Fe-MOF as well as its correct retention in the elaborated membranes. The usefulness and effectiveness of the Fe-MOF nanofiber membrane as a catalyst for the electro-Fenton process was evaluated by performing sulfamethoxazole degradation tests. Different parameters such as the effect of intensity (25 and 100 mA), the effect of the drug initial concentration (10–50 mg/L) and the reusability of membranes were studied. Then, the degradation of a drug mixture formed by sulfamethoxazole and antipyrine was evaluated, reaching a degradation of 92.10 % and 87.43 % respectively for each drug in 4 h at 25 mA. In addition, the identification of reactive oxygen species was ascertained by scavenger assays. The study of degradation products was also carried out and their toxicity was predicted by ECOSAR program, concluding that the environmental toxicity would disappear with mineralization. Finally, given the good results obtained in batch tests, the behavior of the process was studied in a system that works continuously, achieving a stable degradation of 83.10 % in the case of treatment with a mixture of drugs. This confirmed the stability of the Fe-MOF nanofiber membrane, as well as, its catalytic activity, making it suitable for long-term treatments., Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. TED2021-129590A-I00, Xunta de Galicia | Ref. ED431C2021-43, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PRE2021-098540, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Pesticide abatement using environmentally friendly nano zero valent particles as photo-Fenton catalyst

  • Díez Sarabia, Aida Maria
  • Moreira, Manuela M.
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Albergaria, T.
  • Delerue-Matos, C.
Nano-zero valent iron particles (NZVI) have been used for the pesticide pirimicarb degradation under simulated solar radiation. These particles have been synthesized by extracts from agro-industrial residues, namely vineyard and blueberry pruning, black tea and algae, so they can be labelled as “green-NZVI”. The physico-chemical properties of these green-NZVI were compared to those of NZVI synthesized with NaBH4. The usage of agroindustrial residues as reducing agent not only provided better performant NZVI but also evade the usage of harmful reagents. Indeed, this process is not only within circular economy, and environmentally friendly, but also defeats the degradation performance of the widely reported photo-Fenton process with Fe2+ catalyst. 96.5 % pirimicarb degradation was achieved under simulated solar radiation within 15 min with 0.08 mM H2O2 and 0.16 mM NZVI synthesized with black tea extract. Further, the developed process was optimized in terms of reagents concentration and natural antioxidant extract used for NZVI synthesis, which demonstrated a strong effect on pirimicarb degradation due to the differences on natural phenolic compounds present on them. The pirimicarb degradation pathway was analysed, confirming the successful pesticide degradation. In terms of H2O2 concentration, it can be reduced by its sequential addition in time. Under optimal conditions, even real effluents can be successfully degraded., Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Fundação para a Ciência e a Tecnologia | Ref. UIDB/50006/2020, Fundação para a Ciência e a Tecnologia | Ref. UIDP/50006/2020, Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Novel polypyrrole-coated ZnCo2O4 spinel nanostructures for prompt and efficient adsorption of Cr(VI) from wastewater

  • Zouggari, Hamid
  • Mahir, Fatima-Zahra
  • Díez Sarabia, Aida Maria
  • Djellabi, Ridha
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
  • Laabd, Mohamed
  • Bazzi, Lahcen
  • Albourine, Abdallah
This work designed an innovative polypyrrole/zinc cobaltite spinel oxide (Ppy@ZnCo2O4) nanocomposite useful as competitive adsorbent for the elimination of Cr(VI) from wastewater. Assorted analytical approaches were implemented to explore the Ppy@ZnCo2O4 structure and morphological aspects. The batch experiments for process optimization through the response surface approach integrated with box-Behnken design (RSM/BBD), confirmed that the quadratic model fits Cr(VI) removal with R2 = 0.999. Encouragingly, the Ppy@ZnCo2O4 nanocomposite demonstrated outstanding adsorption efficiency for Cr(VI) in wastewater, achieving 97.86 ± 0.58 % removal in just 40 min. The highest uptake capability reached 273.12 ± 1.44 mg.g− 1 , and the adsorption experimental results aligning well with both the Freundlich isotherm and pseudo-second-order kinetic models. Thermodynamic outcomes revealed that the Cr(VI) adsorption exhibited exothermic and spontaneous behavior, and contributed to a lessening in the disorder of the Cr (VI) species onto the Ppy@ZnCo2O4 surface. In addition, mechanism investigation confirmed that Cr(VI) species were initially adsorbed through electrostatic attractions, then converted to Cr(III), and finally anchored by forming chelates with N-containing functional groups of Ppy@ZnCo2O4. The as-developed Ppy@ZnCo2O4 demonstrated a straightforward regenerability via basification and exceptional reusability. In brief, the Ppy@ZnCo2O4 presents considerable promise for proficiently eradicating Cr(VI) species from wastewater., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. RYC2023-044934-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Innovative low-voltage 3D electrode system using pine cone biochar for efficient removal of multicomponent pollutants from wastewater

  • Bernárdez Rodas, Nuria
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
The removal of pharmaceuticals in multicomponent systems, in contrast to conventional studies focused on single pollutants, represents a significant challenge in advance in wastewater treatment. This study proposes the integration of a pine cone-derived adsorbent (BPC) into a three-dimensional (3D) electrosorption system for concurrent removal of pharmaceuticals, exploring compounds interactions in complex mixtures. Firstly, the physicochemical properties of BPC revealed high porosity and functional groups that facilitate adsorption. Batch adsorption assays identified the optimal conditions: a particle size of <0.25 mm and a BPC dose of 2.5 g/L, achieving 100 % removal of fluoxetine (FLX) and promising results for sulfamethoxazole (SMX) and sulfamethizole (SMZ). Then, the 3D electrosorption system, operating at 1.2 V, enhanced adsorption capacity for SMX and SMZ, which increased by 1.67 and 1.69 times, respectively, after three cycles of use. Further testing in a continuous flow configuration with a multicomponent matrix showed a 1.13-fold, 1.60-fold and 1.34-fold improvement for the FLX, SMZ and SMX adsorption capacity in 3D electrosorption compared to continuous flow adsorption. Multicomponent isotherm modelling, using Sheindorf-Rebuhn-Sheintuch (SRS) model, accurately described pollutant interactions. Desorption and regeneration processes were analyzed using organic solvents, showing partial in situ degradation of pollutants. Finally, 3D electrosorption treatment was applied to river water to evaluate its practical feasibility. The results highlight the potential of BPC when integrated with a 3D electrosorption system as a sustainable and cost-effective solution for wastewater treatment containing multicomponent pollutants, supporting the Sustainable Development Goals and aligning with circular economy principles., Agencia Estatal de Investigación | Ref. PCI2022-132941, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Peroxymonosulfate activation by different synthesized CuFe-MOFs: application for dye, drugs, and pathogen removal

  • Fernández Sanromán, Antía
  • Lomba Fernandez, Bárbara
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
In this study, three CuFe-MOFs were successfully synthesized by a solvothermal process by changing the ratio of solvents, salts, or temperature. These MOFs named CuFe(BDC-NH2)R, CuFe(BDC-NH2)S, and CuFe(BDC-NH2)D showed rod-shaped, spindle-like, and diamond-like structures, respectively. The CuFe(BDC-NH2)D and CuFe(BDC-NH2)S were found to exhibit an improved PMS activation for Rhodamine B removal attaining levels around 92%. Their effective removal capability was investigated as a function of the pH, catalyst dosage, and the effect of the application of UV radiation. The best degradation system was photo-assisted activation of PMS when CuFe(BDC-NH2)D and CuFe(BDC-NH2)S were used. Under these conditions, the degradation of a mixture of antibiotic and anti-inflammatory drugs (sulfamethoxazole and antipyrine) was evaluated with the results revealing the total degradation of both drugs after 1 h. A higher antibacterial activity was attained with the system CuFe(BDC-NH2)R/PMS due to the high copper content with respect to the others., Ministerio de Ciencia e Innovación | Ref. PCI2022-132941, Ministerio de Ciencia e Innovación | Ref. PID2020-113667GBI00, Xunta de Galicia | Ref. ED431C 2021-43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Immobilization of esterase from Bacillus subtilis on Halloysite nanotubes and applications on dibutyl phthalate degradation

  • Balci, Esin
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • Sofuoglu, Aysun
  • Sanromán Braga, María Ángeles
Dibutyl phthalate (DBP) is one of the listed phthalic acid esters (PAEs) known as the priority toxicants which exhibit carcinogenic and teratogenic properties and is responsible for endocrine disruption. Therefore, its removal has become a matter to tackle with. In this work, the feasibility of DBP degradation by esterase and lipase enzymes obtained from various microorganisms and the immobilization of the most effective in a clayey material were investigated. Esterase from Bacillus subtilis exhibited the highest degradation efficiency reaching a complete degradation. Its immobilization onto halloysite nanotubes (HNTs) by adsorption method was studied by response surface methodology using a central composite design face-centered. The four selected factors that affect the HNT-enzyme composite generation were: pH, adsorption time, enzyme/HNT (E/H) ratio, and adsorption temperature, and the optimal conditions were determined (pH 7, time 360 min, E/H ratio 0.2, temperature 30ºC). Consequently, the activity did not significantly decrease by immobilization, and the adsorption efficiency and relative activity were determined to be 73.15% and 82.7%, respectively. Besides, the immobilization enhanced thermal and storage stability. As for enzyme reusability, after 7 continuous cycles, the composite maintained almost 75% of its initial activity. Both the free enzyme (1 mg/mL) and the composite degraded 100 mg/L DBP with 100% efficiency and several byproducts were detected. Moreover, the composite could be reused for 7 cycles keeping a remarkable catalytic activity. Overall, this study indicated that the HNT-enzyme composite may be used as an effective candidate for remediation of the environmental media contaminated with DBP and other PAEs., Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2021-43, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Enhancing sulfamethizole adsorption on graphitic carbon nitride via coffee hydrochar incorporation and electric field application in different water matrices

  • Fernández Sanromán, Antía
  • Díez Sarabia, Aida Maria
  • Sanromán Braga, María Ángeles
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
This study addresses the urgent need for sustainable and efficient water treatment solutions by developing a new green material with enhanced adsorption capabilities through the incorporation of hydrocarbons derived from banana peels (HC-P) or coffee waste (HC-C) into graphitic carbon nitride (GCN). In addition to its dual functionality of electrosorption and catalytic activity, this environmentally friendly synthesis avoids the use of organic solvents and metals, reducing its environmental footprint and costs. Initial tests on sulfamethizole (SMZ) adsorption and electrosorption were conducted with both hydrochars, with HC-C demonstrating superior performance. The optimization of HC-C content in the composite revealed that 10 wt%(GCN@HC-C10) provided the best results. Using this composite around 95% SMZ removal under electrosorption at 1.2 V was achieved in only 120 min. The compound was then immobilized on a carbon felt electrode (GCN@HC-C10/CF), which facilitated its practical application and reuse in real water systems. The durability of GCN@HC-C10/CF was validated by five cycles, and its photocatalytic regeneration under visible LED light resulted in minimal reduction of adsorption capacity (<8%). The hybrid electrosorption-regeneration process successfully mineralized SMZ during photoregeneration, highlighting the potential of GCN@HC-C10/CF for efficient and sustainable pollutant removal. To our knowledge, there are no previous studies reporting green catalytic materials with dual functionality such as the one presented here. Finally, tests on real water samples (tap and river) underline the applicability of the material in various water purification contexts, positioning it as a promising candidate for water purification applications., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2021–43, Agencia Estatal de Investigación | Ref. PRE2021-098540, Xunta de Galicia | Ref. ED481D-2023/015, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Combination of advanced oxidation technologies and selective adsorption for the treatment of microcontaminants, Combinación de tecnologías de oxidación avanzada y adsorción selectiva para el tratamiento de micro-contaminantes, Combinación de tecnoloxías de oxidación avanzada e adsorción selectiva para o tratamento de micro-contaminantes

  • Puga Pazo, Antón
The impacts of increasing industrialization and its effects on environmental deterioration requires the development of alternative treatment technologies for the removal of the new generated pollutants. Among them, the so-called emerging micro-contaminants, whose presence in the environment is not necessarily new but cause environmental problems, are a matter of concern that require solutions. In recent years, advanced oxidation processes (AOPs) became a suitable alternative in the treatment of effluents due to their versatility in the degradation of organic pollutants of different nature. This property lies in the powerful action shown by the agent generated in all of them: the hydroxyl radical. However, and due to the low concentration in which the pollutants are found in wastewater, their previous concentration would allow to improve the water treatment by AOP and favour the elimination in an even more efficient way. Techniques based on adsorption are good alternatives to facilitate this process. In this context, this doctoral thesis will be focused on the application of various technologies such as adsorption and electro-adsorption for the concentration of micro-contaminants and, thereby, reducing the volume of liquid to be treated; and, on the other hand, the coupling with AOP processes for the final treatment of concentrated emerging contaminants. Therefore, it will be necessary to optimize separately the different technologies, and in the specific case of the AOPs, a special interest will be given in the development of new heterogeneous catalysts and the optimization of the processes for operating in a continuous flow system. In the last phase of the thesis, the design and implementation of a hybrid treatment system will be carried out for the wastewater treatment encompassing the two mentioned steps. Thus, it will be possible to concentrate and degrade the micro-contaminants to complete the cycle of this study, El aumento del deterioro medioambiental debido al incremento de la industrialización obliga a validar nuevas tecnologías para su aplicación en la degradación de nuevos contaminantes, como son los denominados micro-contaminantes emergentes, cuya presencia en el medio ambiente no es necesariamente nueva, ni se presentan en concentraciones elevadas, pero sí generan problemas medioambientales que requieren de solución. En los últimos años, los procesos de oxidación avanzada (AOPs) se revelaron como una interesante alternativa en el tratamiento de efluentes debido a la versatilidad que muestran en la degradación de contaminantes orgánicos de diferente naturaleza. Esta propiedad radica en la potente acción que demuestra el agente generado en todos ellos: el radical hidroxilo. Debido a la baja concentración en la que los contaminantes se encuentran, su previa concentración permitiría mejorar el tratamiento de las aguas mediante AOP y favorecer la eliminación de un modo todavía más eficaz. Las técnicas basadas en adsorción se presentan como buenas alternativas para facilitar dicho proceso. En este contexto, esta tesis doctoral se centrará en la aplicación de diversas tecnologías como la adsorción y la electro-adsorción para la concentración de los micro-contaminantes y con ello reducir el volumen de líquido a tratar; y, por otra parte, el acoplamiento de procesos de AOPs para el tratamiento final de los contaminantes emergentes concentrados. Para ello, será necesaria la optimización por separado de las diversas tecnologías, y en el caso concreto de los AOPs, se prestará especial interés en el desarrollo de nuevos catalizadores heterogéneos y la optimización de los procesos operando en sistema de flujo en continuo. Ya en la última fase de la tesis, se llevará a cabo el diseño y ejecución de un sistema para la realización de un tratamiento híbrido que englobe las dos partes mencionadas, con el que se conseguirá concentrar y degradar los micro-contaminantes para completar así el ciclo de este estudio., O aumento do deterioro medioambiental debido ao incremento da industrialización obriga a validar novas tecnoloxías para a súa aplicación na degradación de novos contaminantes, como son os denominados micro-contaminantes emerxentes, cuxa presenza no medio ambiente non é necesariamente nova, nin se atopan en concentracións elevadas, pero si xeneran problemas medioambientais que requiren unha solución. Nos últimos anos, os procesos de oxidación avanzada (AOPs) reveláronse como unha interesante alternativa no tratamento de efluentes pola versatilidade que mostran na degradación de contaminantes orgánicos de diferente natureza. Esta propiedade radica na potente acción que mostra o axente xerado en todos eles: o radical hidroxilo. Debido á baixa concentración na que os contaminantes se atopan, a súa previa concentración permitiría mellorar o tratamento de augas mediante AOPs favorecendo a súa eliminación dunha maneira todavía máis eficaz. As técnicas basadas na adsorción preséntanse como boas alternativas para facilitar dito proceso. Neste contexto, esta tese doctoral centrarase na aplicación de diversas tecnoloxías como a adsorción e a electro-adsorción para a concentración dos micro-contaminantes e con isto reducir o volume de líquido a tratar; e, por outra parte, o acoplamento de procesos de AOPs para o tratamento final dos contaminantes emerxentes concentrados. Con isto, será necesaria a optimización por separado das diversas tecnoloxías, e no caso concreto dos AOPs, prestarase especial interés no deseño de novos catalizadores heteroxéneos e a optimización dos procesos operando nun sistema de fluxo en continuo. Xa na última fase da tese, levarase á práctica o deseño e a execución dun sistema para a realización dun tratamento híbrido que englobe as dúas partes mencionadas, co que se conseguirá concentrar e degradar os micro-contaminantes para completar así o ciclo deste estudo., Agencia Estatal de Investigación | Ref. CTM2017-87326-R, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2017/47, Xunta de Galicia | Ref. ED431C 2021/43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Enhancing stability and immobilization techniques for graphitic carbon nitride in photocatalytic applications

  • Fernández Sanromán, Antía
  • Lomba Fernandez, Bárbara
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
Emerging contaminants from urban and industrial sources require effective water treatment and photocatalysis using graphitic carbon nitride (GCN) is emerging as a promising solution. This graphitic polymer, devoid of metals in its structure, exhibits properties similar to titanium oxide, the quintessential traditional photocatalyst. This work aims to optimize the application of GCN as photocatalysts, emphasizing its role in photocatalytic processes by improving its properties for the visible light-assisted photodegradation process and assessing the removal of a selected pollutant, Rhodamine B. Initially, the role of the catalyst precursor (urea, melamine and a ratio 1:1 of them) in the synthesis was evaluated. GCN obtained from urea as precursor yielded to better properties and higher purity of the catalyst. In addition, through acid treatment, slight improvements in the material properties were verified, such as an increase of the crystallinity and active sites. This acid modified catalyst enhanced the photocatalytic process, achieving complete removal of Rhodamine B in 30 min. A significant improvement in the chemical stability of the material was also observed, maintaining nearly its entire removal efficacy after 10 cycles. However, several operational problems were observed due to the powder form of the GCN, and, thus, requesting the development of efficient immobilized catalysts. Therefore, three techniques (encapsulation, electrospinning, and composite) were evaluated and the variations in GCN distribution and their influence on the photocatalysis process ascertained. From this evaluation, it can be concluded that the electrospinning technique, using polyacrylonitrile polymer (PAN) to form fibres, generated a highly porous, hydrophilic material with excellent floatability. This allowed maximizing radiation exposure during the process, achieving an 85 % reduction of Rhodamine B concentration in 90 min. Among other remarkable properties, GCN exhibits high reusability when incorporated into PAN fibres, as it remained chemically and physically stable, retaining more than 85 % of its dye removal efficiency after 4 cycles, Agencia Estatal de Investigación | Ref. PID2020-113667 GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PRE2021-098540, Xunta de Galicia | Ref. ED431C 2021–43, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Efficient fluoxetine removal from water using Tunisian clay as adsorbent and its regeneration through NaOH-activated peroxymonosulfate

  • Atawa, Oumaima
  • Escudero Curiel, Silvia
  • Amor, Hedi Ben
  • Ouakouak, Abdelkader
  • Hamdi, Noureddine
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Pharmaceuticals in aquatic environments pose significant environmental and public health risks. This pioneering study introduces a novel approach to removing fluoxetine (FLX) through adsorption onto Tunisian purified clay (PC), while exploring an innovative adsorbent regeneration method via Advanced Oxidation Processes (AOPs). The adsorbent material was characterized using various techniques to determine its: morphological structure, physical properties, mineralogical composition and chemical composition. Key adsorption parameters (contact time, pH, and initial concentration) were optimized, the optimization process revealed an impressive maximum adsorption capacity of 390.28 mg/g for FLX by PC. The experimental data best fit with the pseudo-second order and Langmuir models, these findings provide insights into the adsorption mechanism and surface characteristics of the PC. The PC regenerated with PMS activated by NaOH is an interesting innovation in the field of reusable clay materials, maintaining a high performance across four cycles, with efficiency dropping only from 94 % to 64 %. The study’s findings represent a significant advancement in developing sustainable solutions for pharmaceutical removal from aquatic environments. By combining a highly efficient, locally-sourced adsorbent with a novel regeneration method, this research opens new avenues for addressing the growing concern of pharmaceutical contamination in water bodies, offering a promising, eco-friendly approach to water treatment technologies., Xunta de Galicia | Ref. ED481B-109, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2021–43, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Polymer-supported heterogeneous fenton catalysts for the environmental remediation of wastewater

  • Bouzayani, Bakhta
  • Sanromán Braga, María Ángeles
Materials based on polymer hydrogels have demonstrated potential as innovative Fenton catalysts for treating water. However, developing these polymer-supported catalysts with robust stability presents a significant challenge. This paper explores the development and application of polymer-supported heterogeneous Fenton catalysts for the environmental remediation of wastewater, emphasizing the enhancement of metal incorporation into catalysts for improved efficiency. The study begins with an introduction to the heterogeneous Fenton process and its relevance to wastewater treatment. It further delves into the specifics of polymer-supported heterogeneous Fenton catalysts, focusing on iron oxide, copper complexes/nanoparticles, and ruthenium as key components. The synthesis methods employed to prepare these catalysts are discussed, highlighting the innovative approaches to achieve substantial metal incorporation. Operational parameters such as catalyst dosage, pollutant concentration, and the effect of pH on the process efficiency are thoroughly examined. The catalytic performance is evaluated, providing insights into the effectiveness of these catalysts in degrading pollutants. Recent developments in the field are reviewed, showcasing advancements in catalyst design and application. The study also addresses the stability and reusability of polymer-supported heterogeneous Fenton catalysts, critical factors for their practical application in environmental remediation. Environmental applications are explored, demonstrating the potential of these catalysts in addressing various pollutants. The Conclusions offers future perspectives, underlining the ongoing challenges and opportunities in the field, and the importance of further research to enhance the efficacy and sustainability of polymer-supported heterogeneous Fenton catalysts for wastewater treatment., Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C 2021-43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Pushing the operational barriers for g-C3N4: a comprehensive review of cutting-edge immobilization strategies

  • Fernández Sanromán, Antía
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
This comprehensive review explores recent advancements in immobilization strategies for graphitic carbon nitride (g-C3N4), a metal-free photocatalyst that has gained significant attention for its optical and physicochemical properties comparable to traditional photocatalysts like TiO2. However, a critical challenge regarding their application has emerged from the difficulty of its recovery due to its powdery nature. Therefore, several alternatives are being explored to immobilize this material, facilitating its recovery and reuse. This review systematically categorizes various physical and chemical immobilization techniques, providing an in-depth analysis of their advantages, drawbacks, and applications. Techniques such as encapsulation, electrospinning, casting, and coating, along with their adaptations for g-C3N4, are thoroughly examined. Additionally, the impact of these strategies on enhancing the photocatalytic efficiency and operational stability of g-C3N4, particularly in environmental applications, is also assessed. Thus, this review aims to provide valuable insights and guide future research in the realms of photocatalysis and environmental remediation. The review contributes to the understanding of how immobilization strategies can optimize the performance of g-C3N4, furthering its potential applications in sustainable and efficient environmental solutions., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Xunta de Galicia | Ref. ED431C 2021-43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Biosensor technologies for water quality: detection of emerging contaminants and pathogens

  • Fernández Sanromán, Antía
  • Bernárdez Rodas, Nuria
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • González Romero, Elisa
  • Sanromán Braga, María Ángeles
This review explores the development, technological foundations, and applications of biosensor technologies across various fields, such as medicine for disease diagnosis and monitoring, and the food industry. However, the primary focus is on their use in detecting contaminants and pathogens, as well as in environmental monitoring for water quality assessment. The review classifies different types of biosensors based on their bioreceptor and transducer, highlighting how they are specifically designed for the detection of emerging contaminants (ECs) and pathogens in water. Key innovations in this technology are critically examined, including advanced techniques such as systematic evolution of ligands by exponential enrichment (SELEX), molecularly imprinted polymers (MIPs), and self-assembled monolayers (SAMs), which enable the fabrication of sensors with improved sensitivity and selectivity. Additionally, the integration of microfluidic systems into biosensors is analyzed, demonstrating significant enhancements in performance and detection speed. Through these advancements, this work emphasizes the fundamental role of biosensors as key tools for safeguarding public health and preserving environmental integrity., Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PRE2021-098540
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Advancing in wastewater treatment using sustainable electrosorbents

  • Fernández Sanromán, Antía
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
Separation and purification processes using adsorption are becoming more and more popular, with excellent benefit-cost ratio and high effluent quality. However, it is important to recognize the requirement for new adsorbents and to avoid the generation of contaminated adsorbents that can have a severe impact on the environment. Thus, underscoring the need for sustainable approaches in the management and regeneration of these materials. To improve this process, two challenges are being approached nowadays: the synthesis of adsorbents from wastes in a circular economy model and its integration with electrochemistry (electrosorption) to enhance the adsorbent capacity and its regeneration by green electricity. This review summarizes the key studies and trends related to electrosorption (60 articles) and its application in the removal of different pollutants from wastewater. It must be highlighted that around 33% of them, detailed the synthesis of green electrosorbents with application in the removal of inorganic and organic pollutants. In addition, other studies with non-sustainable electrodes (approximately 23%) describe the last trend to improve electrosorbent characteristics. From our standpoint, it is crucial to delve into this research, particularly regarding their application to green electrosorbents to enhance the efficiency of electrosorption processes, a potential breakthrough in the field., Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED431C 2021-43, Agencia Estatal de Investigación | Ref. PRE2021-098540, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Peroxymonosulfate activation by iron-rich biochar derived from sewage sludge digestate for sulfamethoxazole degradation: A rigorous examination of performance and mechanistic insights

  • Ben Hamou, Aboubakr
  • Escudero Curiel, Silvia
  • Iberache, Noureddine
  • Torres Pinto, André
  • Jada, Amane
  • Pazos Currás, Marta María
  • El Alem, Noureddine
  • Sanromán Braga, María Ángeles
The ubiquitous presence of sulfamethoxazole (SMX) within aquatic ecosystems coupled with the increasing production of solid waste digestate has emerged as a critical environmental challenge. This necessitates the development of efficient decontamination strategies and sustainable waste management approaches. This study introduces iron-doped biochar (FBC-600), synthesized via pyrolysis of sewage sludge digestate (SSD), as an effective catalyst for peroxymonosulfate (PMS) activation to degrade SMX in aqueous media, thereby transforming this waste byproduct into a valuable material for environmental remediation. The FBC-600/PMS system exhibited efficient SMX removal nearly complete within 90 min under optimized conditions. Notably, the system demonstrated robustness against pH variations and the presence of inorganic ions. Mechanistic investigations implicated singlet oxygen (1O2) and electron transfer as predominant reactive oxygen species (ROS). The catalytic performance was attributed to the synergistic interplay of Cdouble bondO, embedded iron, structural defects active sites on the FBC-600 surface. Moreover, the catalyst exhibited exceptional reusability and minimal iron leaching. The transformed products of SMX were examined through density functional theory (DFT) calculations and Liquid Chromatography-Mass Spectrometry (LC-MS). Concomitantly, the estimated toxicity of the identified intermediates was determined to be lower than that of SMX. This study highlights the potential of FBC-600 as a sustainable catalyst for SMX degradation by valorizing industrial bio-digestate according to zero-waste principles, which aim to minimize waste through strategies such as, reusing, reducing, recycling, refusing and composting., Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Universidade de Vigo/CISUG, Xunta de Galicia | Ref. ED431C 2021–43, Fundação para a Ciência e a Tecnologia | Ref. UID/ 50020/2025, Fundação para a Ciência e a Tecnologia | Ref. LA/P/0045/2020, European Union
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

From waste to resource: valorization of lignocellulosic agri-food residues through engineered hydrochar and biochar for environmental and clean energy applications—a comprehensive review

  • Escudero Curiel, Silvia
  • Giráldez Rodríguez, Alba
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Agri-food residues or by-products have increased their contribution to the global tally of unsustainably generated waste. These residues, characterized by their inherent physicochemical properties and rich in lignocellulosic composition, are progressively being recognized as valuable products that align with the principles of zero waste and circular economy advocated for by different government entities. Consequently, they are utilized as raw materials in other industrial sectors, such as the notable case of environmental remediation. This review highlights the substantial potential of thermochemical valorized agri-food residues, transformed into biochar and hydrochar, as versatile adsorbents in wastewater treatment and as promising alternatives in various environmental and energy-related applications. These materials, with their enhanced properties achieved through tailored engineering techniques, offer competent solutions with cost-effective and satisfactory results in applications in various environmental contexts such as removing pollutants from wastewater or green energy generation. This sustainable approach not only addresses environmental concerns but also paves the way for a more eco-friendly and resource-efficient future, making it an exciting prospect for diverse applications., Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Xunta de Galicia | Ref. ED431C 2021-43, Universidade de Vigo
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Efficient degradation of organic pollutants using MnCuFe-LDH as a photo-fenton catalyst

  • Mkaddem, H.
  • Fernández Sanromán, Antía
  • Rosales Villanueva, Emilio
  • Pazos Currás, Marta María
  • Benamor, Hedi
  • Sanromán Braga, María Ángeles
A novel heterogeneous photocatalyst, MnCuFe- Layered Double Hydroxide (LDH), was successfully accomplished by co-precipitation method. Structural and morphological properties were ascertained and an amorphous structure enhancing active site exposure, and significantly boosting its intrinsic catalytic activity, was observed. MnCuFe-LDH effectiveness was assessed in the degradation of Rhodamine B (RhB) and Antipyrine (ANT) solutions, by a heterogeneous photo-Fenton process. This approach is designed to address key environmental challenges by providing a highly effective method for pollutant degradation. This aspect is particularly crucial when considering the necessity of avoiding false positives in environmental remediation efforts. The results demonstrated that MnCuFe-LDH exhibits remarkable degradation efficiency (RhB 97.23 % and ANT 72.76 % within only 1 h), under acidic conditions and UV-A radiation. The MnCuFe-LDH stability and reusability were confirmed through consistent performance in degrading RhB across five consecutive cycles. Additionally, the identification of degradation products generated during pollutant breakdown facilitated the understanding of pollutant degradation pathways., Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. TED2021-129590A-I00, Agencia Estatal de Investigación | Ref. PRE2021-098540, University of Gabes, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Tesis doctoral (DoctoralThesis)

Strategies to improve the removal of organic micro-pollutants by synergetic technologies, Estrategias para mejorar la eliminación de micro contaminantes orgánicos mediante tecnologías sinérgicas, Estratexias para mellorar a eliminación de micro-contaminantes orgánicos por tecnoloxías sinérxicas

  • Ouiriemmi , Imen
In the aquatic environment, organic micro-pollutants (OMPs) can be defined as anthropogenic organic chemicals that occur, due to human activities, well above a potential natural background level, but with concentrations remaining at trace levels (ranging from several ng L-1 to a few mg L-1). If improperly dealt with, effluents contaminated with OMPs can generate a great environmental and health problem. Therefore, efficient treatment techniques of these pollutants are required. Among numerous techniques used for OMPs removal, adsorption represents one of the cheapest alternatives depending on the adsorbent source. This process is characterized by ease of operation, flexibility, and simplicity of the design. Furthermore, by application of this method, a rapid response is possible to manipulate catastrophic environmental problems. Recently, much more advanced techniques, so-called advanced oxidation processes (AOPs), have attracted great interest due to their high efficiency in the removal of OMPs from contaminated wastewaters.These processes are based on the generation of powerful radicals like &#9679;OH or &#9679; SO4. In this thesis, different AOPs will be used for the treatment of effluents contaminated with OMPs either alone or in combination with adsorption. The synergetic effects of AOPs and adsorption will be evaluated. Thus, using adsorption as a pre-concentration step for AOPs can be a solution to render these latter processes more amenable and efficient for the treatment of large volumes of wastewater at low concentration. On the other hand, using AOPs for adsorbent regeneration can solve secondary pollution caused by the disposal of exhausted adsorbents. During the treatment of contaminated effluents, operational conditions will be controlled and optimized to obtain the maximum removal of the pollutant and even its total mineralization., En el ambiente acuático, los micro contaminantes orgánicos (OMP) pueden definirse como químicos orgánicos antropogénicos que se producen, debido a actividades humanas, en concentraciones muy por encima de un nivel base natural, aunque permanecen en niveles de trazas (que varían desde varios ng L-1 a unos pocos mg L-1). Si no se trata adecuadamente, los efluentes contaminados con OMP pueden generar un gran problema ambiental y de salud. Por lo tanto, se requieren técnicas de tratamiento eficientes de estos contaminantes. Entre las numerosas técnicas utilizadas para la eliminación de OMP, la adsorción representa una de las alternativas más baratas según el material adsorbente. Este proceso se caracteriza por la facilidad de operación, flexibilidad y simplicidad del diseño. Además, mediante la aplicación de este método, es posible una respuesta rápida para manipular problemas ambientales catastróficos. Recientemente, técnicas mucho más avanzadas, los llamados procesos de oxidación avanzada (AOP), han atraído un gran interés debido a su alta eficiencia en la eliminación de OMP de aguas residuales contaminadas. Estos procesos se basan en la generación de radicales potentes como &#9679; OH o &#9679; SO4. En esta tesis, se utilizarán diferentes AOP para el tratamiento de efluentes contaminados con OMP, ya sea solos o en combinación con adsorción. Se evaluarán los efectos sinérgicos de los AOP y la adsorción. Por lo tanto, el uso de la adsorción como un paso de preconcentración para AOP puede ser una solución para hacer que estos últimos procesos sean más adecuados y eficientes para el tratamiento de grandes volúmenes de aguas residuales a baja concentración. Por otro lado, el uso de AOP para la regeneración de adsorbentes puede resolver la contaminación secundaria causada por la eliminación de adsorbentes agotados. Durante el tratamiento de efluentes contaminados, las condiciones operativas se controlarán y optimizarán para obtener la máxima eliminación del contaminante e incluso su mineralización total., No medio acuático, os micro-contaminantes orgánicos (OMPs) poden definirse como produtos químicos orgánicos antropoxénicos que se producen, debido ás actividades humanas, moi por encima dun nivel base natural, inda que permanecen con concentracións que quedan en niveis moi baixos (que varían de varios ng L-1 a algúns mg L-1). Se se tratan de forma inadecuada, os efluentes contaminados con OMP poden xerar un gran problema ambiental e de saúde. Por iso, son necesarias técnicas de tratamento eficientes destes contaminantes. Entre as numerosas técnicas empregadas para a eliminación de OMP, a adsorción representa unha das alternativas máis baratas dependendo do material adsorbente. Este proceso caracterízase pola facilidade de operación, flexibilidade e sinxeleza do deseño. Ademais, mediante a aplicación deste método, unha resposta rápida é posible para manipular problemas ambientais catastróficos. Recentemente, técnicas moito máis avanzadas, os chamados procesos de oxidación avanzada(AOPs), teñen un gran interese debido á súa alta eficiencia na eliminación de OMP de augas residuais contaminadas. Estes procesos baséanse na xeración de radicais poderosos como &#9679; OH ou &#9679; SO4. Nesta tese empregaranse distintos AOP para o tratamento de efluentes contaminados con OMP só ou en combinación con adsorción. Avaliaranse os efectos sinérxicos dos AOP e da adsorción. Así, empregar a adsorción como paso previo á concentración para os AOP pode ser unha solución para facer estes últimos procesos máis amables e eficientes para o tratamento de grandes volumes de augas residuais a baixa concentración. Por outra banda, empregar AOP para a rexeneración adsorbente pode resolver a contaminación secundaria causada pola eliminación de adsorbentes esgotados. Durante o tratamento de efluentes contaminados controlaranse e optimizaranse as condicións operativas para obter a máxima eliminación do contaminante e incluso a súa mineralización total., Agencia Estatal de Investigación | Ref. PID2020-113667GB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Xunta de Galicia | Ref. ED431C2021/43