Pasar al contenido principal

AVANZANDO POR UN FUTURO MAS ECOLOGICO: INTEGRACION DE MATERIALES RESPETUOSOS CON EL MEDIO AMBIENTE PARA LA PURIFICACION DEL AGUA E INICIATIVAS DE ENERGIA RENOVABLE

PID2023-146133NB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2023
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE VIGO

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Thin-film photoreactor with hydrogel-immobilized carbon dot-functionalized graphitic carbon nitride for pollutant degradation

  • Fernández Sanromán, Antía
  • Otero Romero, David
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
This study reports the development of a sustainable, metal-free photocatalytic system for degrading emerging pollutants in water. A novel photocatalyst based on graphitic carbon nitride modified with carbon dots and amine-functionalized (GCN@CD-A) was synthesized to enhance visible-light absorption and charge separation, resulting in improved photocatalytic activity. The GCN@CD-A composite was immobilized within biopolymer hydrogels composed of carboxymethylcellulose (CMC) and sodium alginate (SA) to address the recovery and reuse limitations associated with powdered catalysts. Different CMC:SA ratios were tested to optimize the mechanical stability and photocatalytic performance of the hydrogel matrix. Among them, ratio 1:1 provided the best balance between structural integrity and catalytic efficiency, maintaining degradation performance comparable to the powdered catalyst toward model pollutants such as Rhodamine B, paracetamol, and acebutolol. Comprehensive material characterization confirmed successful composite formation and effective catalyst immobilization, while scavenger experiments identified superoxide radicals as the dominant reactive radical. The optimized hydrogel was subsequently integrated into a 3D-printed inclined thin-film photoreactor designed to enhance light exposure and mass transfer under laminar flow conditions. Photocatalytic performance was evaluated in recirculation mode using different water matrices, including ultrapure water, tap water, and secondary effluent. Complete degradation of the target pollutants was achieved under visible light irradiation, although reaction efficiency was influenced by water matrix complexity. Overall, this integrated approach demonstrates a scalable, eco-friendly solution for advanced water treatment, combining efficient pollutant degradation with improved catalyst reusability and practical applicability., Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Xunta de Galicia | Ref. ED431C 2025/47, Agencia Estatal de Investigación | Ref. PDC2021-121394-I00, Agencia Estatal de Investigación | Ref. PRE2021-098540, Xunta de Galicia | Ref. ED481B 2025/057, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Dual-application GCN@Cu-NP composite for photoelectrochemical oxygen evolution reaction and degradation of emerging organic contaminants

  • Fernández Sanromán, Antía
  • Vilas Iglesias, Ana María
  • Pou Álvarez, Pablo
  • Boutinguiza Larosi, Mohamed
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
A composite catalyst based on graphitic carbon nitride and copper nanoparticles (GCN@Cu-NP) was developed to enhance the oxygen evolution reaction (OER) and enable multifunctional performance. Cu-NP were synthesized via pulsed laser ablation in liquid (PLAL) and subsequently integrated with graphitic carbon nitride. The resulting material showed markedly reduced charge-transfer resistance and increased anodic current density, confirming its superior OER activity and improved energy efficiency for water splitting. Beyond electrocatalysis, GCN@Cu-NP also promoted the formation of reactive oxygen species, enabling simultaneous degradation of organic pollutants and pathogens during real wastewater treatment. In a photoelectrocatalytic (PEC) system, complete Rhodamine B removal was achieved within 45 min at an initial concentration of 10 ppm using an active electrode surface area of 2 cm², and efficient degradation of pharmaceuticals such as acebutolol, sulfamethoxazole, and antipyrine (all at 10 ppm) was obtained, reaching apparent rate constants up to 4.9 times higher than those of conventional electrochemical processes. Complete elimination of Escherichia coli and Enterococcus spp. was achieved within 30 min from an initial microbial load of 8.0 × 10⁴ CFU/mL, demonstrating strong antibacterial performance. To improve catalyst recovery, GCN@Cu-NP was immobilized in sodium alginate–carboxymethyl cellulose hydrogel beads, forming a reusable three-dimensional electrode that maintained over 90% of its activity after three cycles. Fourier transform infrared spectroscopy and scanning electron microscopy analyses confirmed its structural integrity and self-cleaning behavior. Overall, the enhanced OER kinetics and multifunctional PEC activity highlight GCN@Cu-NP as a promising material for integrated hydrogen generation and wastewater purification., Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Xunta de Galicia | Ref. ED431C 2025/47, Xunta de Galicia | Ref. ED431C 2023/25, Agencia Estatal de Investigación | Ref. RED2022-134552-T, Xunta de Galicia | Ref. ED481B 2025/057, Xunta de Galicia | Ref. ED481B 2023/030, Ministerio de Ciencia, Innovación y Universidades | Ref. FPU21/03472, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Metal–organic frameworks: next-generation materials for environmental remediation

  • Terrón Hernández, Daniel
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
Contamination of water resources, particularly from industrial discharges, agricultural runoff, or hospital wastewater, poses significant environmental and public health challenges. Traditional wastewater treatment methods often fail to effectively remove the diverse and persistent pollutants present in these sources, including emerging chemical compounds or biological agents. To address these challenges, metal–organic frameworks (MOFs) have emerged as multifunctional materials offering promising advancements in wastewater remediation. These materials can be applied directly as pollutant adsorbents or used for pathogen removal due to their antimicrobial activity. Additionally, MOFs play a crucial role in Advanced Oxidation Processes (AOPs) due to their catalytic activity. When incorporated into electro-Fenton, Fenton-like, or photocatalytic processes, MOFs enhance the generation of oxidant radicals, enabling efficient wastewater decontamination. This comprehensive review explores the potential of MOFs, focusing specifically on their design, synthesis, and application as multifunctional materials for the inactivation of pathogens and the removal of organic pollutants. Moreover, it examines their characteristics, recent advances in synthesis techniques, and the mechanisms underlying their removal efficiency. The findings presented underscore the transformative potential of MOFs in achieving clean and safer water, contributing to sustainable environmental management and public health protection., Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Xunta de Galicia | Ref. ED431C 2021/43
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Spinel high-entropy oxides as powerful electrocatalysts for degradation of recalcitrant organic pollutant

  • Bernárdez Rodas, Nuria
  • Barreiro Xardon, Xan
  • Pazos Currás, Marta María
  • Rosales Villanueva, Emilio
  • Sanromán Braga, María Ángeles
In this work a high entropy spinel oxide xerogel (X_HEO), (MnCoFeNi)₃O₄, was synthesized and proposed as a feasible heterogeneous catalyst for electrochemical degradation process. The physicochemical analysis allowed the identification of a structure belonging to the Fd-3 m group and crystalline phases of Fe, Co, Ni, and Mn were detected. A high catalytic activity based on its electrochemical properties was also observed, with an η10 of 307 mV, a Tafel slope of 35.12 mV/dec, and enhanced charge transfer kinetics. The performance of X_HEO as a heterogeneous catalyst was evaluated in the electrooxidation of Rhodamine B and the treatment conditions optimized. The reaction kinetics in the presence of X_HEO increased 2.9 times compared to a process in its absence, attaining 96.67 % removal in 30 min at a current density of 1.6 mA/cm². The reaction mechanism was found to follow a non-radical pathway, dominated by the electrochemical activation of high-valence oxo-metal specie, as supported by XPS analysis and scavenger experiments. Likewise, TOC analysis revealed a mineralization of 91.51 % in 240 min, and the eco toxicity of the final sample was reduced by a factor of 26 times compared to the initial value. X_HEO also showed high electrocatalytic degradation capabilities for pesticides. In particular, total degradation of pymetrozine was reached in just 15 min, with a 45.73 % reduction in TOC by the end of the treatment and the detection of short-chain carboxylic acids confirmed the mineralization process. X_HEO proved to have great potential as a heterogeneous catalyst in electrooxidation treatment and also as sustainable and energy-efficient alternative for the removal of recalcitrant pollutants., Agencia Estatal de Investigación | Ref. TED2021-129590A-I00, Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Xunta de Galicia | Ref. ED431C 2025/47, Agencia Estatal de Investigación | Ref. RED2022-134552-T, Xunta de Galicia | Ref. ED481A 2025/046, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Design of highly stable and scalable three-dimensional alginate-encapsulated cobalt(III) oxide–graphitic carbon nitride–bismuth(III) oxide beads for peroxymonosulfate photoactivation toward antibiotic oxidation in a real water matrix

  • Zouggari, Hamid
  • Mahir, Fatima-Zahra
  • Díez Sarabia, Aida Maria
  • Djellabi, Ridha
  • Sanromán Braga, María Ángeles
  • Albourine, Abdallah
  • Pazos Currás, Marta María
Peroxymonosulfate (PMS)-based advanced oxidation processes are often limited by unstable activation and reliance on continuous mechanical stirring to sustain high photocatalytic performance during pollutant degradation. Herein, a ternary Co3O4–graphitic carbon nitride (GCN)–Bi2O3 dual S-scheme (CoCNBi) was successfully immobilized within calcium alginate (Alg) hydrogel beads (CoCNBi@Alg) via a 3D cross-linking strategy. The biopolymer structure aids dispersion/recovery; despite low BET surface area (3.9 m2 /g), enhanced electroactive area and charge-transfer supported efficient degradation. CoCNBi@Alg beads showed excellent photoelectrochemical performance, achieving substantial mineralization of Sulfamethoxazole (SMX) (up to 76.3% total organic carbon (TOC) removal) under simulated sunlight without external stirring, outperforming bare GCN, Bi2O3, Co3O4, and non-immobilized CoCNBi powder. Additionally, CoCNBi@Alg demonstrated a strong performance under real-water matrices (>98% SMX degradation) and maintained ~91% efficiency after 10 cycles, with minimal metal leaching (Co: 0.05 mg/L; Bi: 0.03 mg/L). Mechanistically, the CoCNBi dual S-scheme heterojunction, coupled with Co/Bi redox cycling, facilitates effective e− /h+ separation and transfer, thereby enhancing PMS activation. In this framework, the Alg matrix acts as a 3D stabilizing scaffold, ensuring better interfacial contact and streamlining mass transfer, thereby triggering synergistic non-radical ( 1 O2) and radical (SO4 •− , • OH, O2 •− ) oxidative species. Liquid chromatography-mass spectrometry (LC-MS) data reveal a complex degradation process with multiple routes, including the cleavage of the sulfonamide bond, hydroxylation, and ring opening, while the reduced toxicity of intermediates was confirmed by ECOSAR predictions. This study demonstrates that the encapsulation of dual S-scheme structures within Alg provides a dependable pathway for complete mineralization., Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Xunta de Galicia | Ref. ED431F 2026/12, Xunta de Galicia | Ref. ED431C 2025/47, Agencia Estatal de Investigación | Ref. RYC2023-044934-I, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Novel polypyrrole-coated ZnCo2O4 spinel nanostructures for prompt and efficient adsorption of Cr(VI) from wastewater

  • Zouggari, Hamid
  • Mahir, Fatima-Zahra
  • Díez Sarabia, Aida Maria
  • Djellabi, Ridha
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
  • Laabd, Mohamed
  • Bazzi, Lahcen
  • Albourine, Abdallah
This work designed an innovative polypyrrole/zinc cobaltite spinel oxide (Ppy@ZnCo2O4) nanocomposite useful as competitive adsorbent for the elimination of Cr(VI) from wastewater. Assorted analytical approaches were implemented to explore the Ppy@ZnCo2O4 structure and morphological aspects. The batch experiments for process optimization through the response surface approach integrated with box-Behnken design (RSM/BBD), confirmed that the quadratic model fits Cr(VI) removal with R2 = 0.999. Encouragingly, the Ppy@ZnCo2O4 nanocomposite demonstrated outstanding adsorption efficiency for Cr(VI) in wastewater, achieving 97.86 ± 0.58 % removal in just 40 min. The highest uptake capability reached 273.12 ± 1.44 mg.g− 1 , and the adsorption experimental results aligning well with both the Freundlich isotherm and pseudo-second-order kinetic models. Thermodynamic outcomes revealed that the Cr(VI) adsorption exhibited exothermic and spontaneous behavior, and contributed to a lessening in the disorder of the Cr (VI) species onto the Ppy@ZnCo2O4 surface. In addition, mechanism investigation confirmed that Cr(VI) species were initially adsorbed through electrostatic attractions, then converted to Cr(III), and finally anchored by forming chelates with N-containing functional groups of Ppy@ZnCo2O4. The as-developed Ppy@ZnCo2O4 demonstrated a straightforward regenerability via basification and exceptional reusability. In brief, the Ppy@ZnCo2O4 presents considerable promise for proficiently eradicating Cr(VI) species from wastewater., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. RYC2023-044934-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Disinfection in wastewater treatment: from conventional to emerging technologies

  • Costa, Mariana
  • Terrón Hernández, Daniel
  • Leal, Cristiano
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
  • Ferreira, Eugénio C.
  • Quintelas, Cristina
Wastewater disinfection is a critical treatment stage that acts as a final barrier against the dissemination of pathogenic microorganisms, contributing to the protection of ecosystems and human health. This work provides a critical and up-to-date review of the main disinfection technologies applied in wastewater treatment plants, addressing their mechanisms of action, operational parameters, advantages, and limitations. Conventional technologies based on chlorination, ozonation, and ultraviolet radiation are reviewed, together with combined and synergistic systems. Emerging technologies are also examined, with particular emphasis on advanced oxidation processes, including Fenton systems, persulfate and peroxymonosulfate activation, electrochemical processes, and non-radical oxidation pathways. These alternatives show considerable potential for combining microbial inactivation with the simultaneous removal of contaminants of emerging concern; however, their large-scale implementation remains constrained by factors such as energy consumption, catalyst stability, operational complexity, and cost. The increasing role of artificial intelligence and real-time monitoring systems is also discussed, particularly for predicting disinfection performance, optimizing chemical dosing, and improving process control. The review demonstrates that no single technology can simultaneously optimize microbial removal, disinfection by-product control, energy efficiency, and economic feasibility. Consequently, future wastewater disinfection strategies should move towards hybrid and multi-barrier treatment trains integrated with intelligent monitoring and control tools, enabling adaptation to wastewater matrix variability and increasingly demanding water reuse requirements., Fundação para a Ciência e a Tecnologia, Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Xunta de Galicia | Ref. ED431C 2025/47, Universidade de Vigo, Research Centre for Natural Resources, Environment and Society
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Novel green synthesis of MnCo2O4 nanoparticles doped on recycled glass for efficient heterogeneous electro-Fenton-like treatment of paracetamol

  • Dhiss, Tesnim
  • Díez Sarabia, Aida Maria
  • Mergbi, Meriem
  • Amor Hédi, Ben
  • Sanromán Braga, María Ángeles
  • Pazos Currás, Marta María
The persistence and toxicity of pharmaceutical pollutants, particularly paracetamol (PCT), pose serious environmental concerns. Herein, manganese cobalt oxide nanoparticles (NP- MnCo2O4) were synthesized via a green, microwave-assisted method using palm petiole extract as a natural reducing and stabilizing agent, highlighting a sustainable valorisation of agricultural waste. For the first time, these nanoparticles were supported on recycled glass (RG) to produce the MnCo2O4-RG nanocomposite, combining enhanced catalytic stability and surface dispersion. This eco-friendly catalyst demonstrated superior performance in a heterogeneous electro-Fenton-like (EFL) process for PCT degradation. Comprehensive physicochemical and electrochemical characterizations were conducted on RG, NP- MnCo2O4 , and MnCo2O4-RG materials. EFL experiments employed carbon felt (CF) as the cathode and platinum (Pt) as the anode. Key operational parameters including catalyst dose, pH, current density, and radical scavengers were systematically investigated. Under optimal conditions (1.2 g/L catalyst, pH 7, 25 mA/cm2 , 90 min), the system achieved 99.07 % PCT removal with a low energy consumption of 0.434 kWh/g PCT. Radical scavenging tests revealed that superoxide (O₂•− ) and hydroxyl (HO•) radicals were the main reactive oxygen species, especially under acidic conditions. The MnCo₂O₄-RG catalyst also exhibited strong reusability, maintaining 91 % PCT removal and 76 % TOC mineralization after five cycles. Structural stability was confirmed by SEM-EDS and XRD, while cobalt (0.87 mg/L; 2.3 %) and manganese (0.52 mg/L; 1.5 %) leaching remained within environmental safety limits. These results demonstrate the novelty and practical potential of recycled glass as a low-cost, sustainable support for efficient electrochemical treatment of pharmaceutical-contaminated wastewater., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Agencia Estatal de Investigación | Ref. RYC2023-044934-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

High-efficiency removal of imidacloprid from wastewater by heterogeneous electro-Fenton process using MnFe2O4/g-C3N4 catalyst in a wide range of pH

  • Iberache, Noureddine
  • Díez Sarabia, Aida Maria
  • Hadfi, Abdallah
  • Errami, Mohamed
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
MnFe2O4/g-C3N4 composites were prepared for the high-efficiency removal of Imidacloprid (IMD) in wastewater via Heterogeneous Electro-Fenton (HEF) process. The prepared catalysts were characterized by XRD, FTIR, Raman, N2 adsorption–desorption analysis, SEM-EDS, and XPS, which proved that the MnFe2O4 was successfully combined with g-C3N4. Moreover, IMD removal by the HEF process using an electrochemical cell was carried out to examine the catalytic performance of the MnFe2O4/g-C3N4. 99.7 % of IMD was decomposed after 60 min of electrolysis under the optimal conditions: the ratio MnFe2O4/g-C3N4 was 1:2, the dose of (1:2) MnFe2O4/g-C3N4 was 0.3 g L−1, the current density was 10 mA cm−2 and the initial pH was 5.5 (natural pH). These results confirmed the excellent removal performance of the system at the lowest Energy Consumption (EC) of 0.107 kWh g−1. Prolonged treatment time of 3 h achieved 87.6 % TOC removal. The HEF process demonstrated an improved Mineralization Current Efficiency (MCE) of 14.5 % and a reduced EC of 0.84 kWh g−1 TOC. Quenching experiments exhibited the hydroxyl radicals (•OH) as the primary active species for IMD degradation. Moreover, the HEF with MnFe2O4/g-C3N4 showed excellent catalytic effectiveness in different water matrices, reaching 84.5 % IMD removal in real wastewater after 60 min. This study evaluates the recyclability and the stability of (1:2) MnFe2O4/g-C3N4 catalyst during 5 cycles, which was confirmed by various characterization analyses of the used catalyst such as XRD, FTIR and XPS measurements., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Agencia Estatal de Investigación | Ref. RYC2023-044934-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Production of biodiesel from waste cooking oil and non-edible M. oleifera oil utilizing a CaO/CuFe₂O₄/LaTiO₃ Perovskite@Na bifunctional heterogeneous nanocatalyst

  • Foroutan, Rauf
  • Foroughi, Mahsa
  • Tutunchi, Abolfazl
  • Ramavandi, Bahman
  • Terrón Hernández, Daniel
  • Pazos Currás, Marta María
In this study, CaO derived from eggshell waste was modified with magnetic nanoparticles (CuFe₂O₄) and LaTiO₃ Perovskite@Na to serve as a bifunctional magnetic nanocatalyst for biodiesel synthesis from Moringa oleifera oil (MoO) and waste cooking oil (WCO). The nanocatalyst demonstrated specific surface area and magnetic saturation of 19.059 m²/g and 12.501 emu/g, respectively, with XRD and AFM analyses indicating a crystalline structure with rough surface texture. The study utilized response surface methodology-central composite design (RSM-CCD) to optimize critical independent variables, such as nanocatalyst concentration, reaction time, methanol-to-oil ratio, and reaction temperature, with the goal of maximizing biodiesel yield. The second-order polynomial model showed high accuracy in predicting biodiesel yield, with strong F-values, low p-values, and minimal Lack of Fit errors. Optimal conditions for biodiesel production were established as a methanol-to-oil ratio around 16.4–16.918, a nanocatalyst dose of approximately 2.4–2.541 wt%, reaction times between 153 and 172 minutes, and temperatures around 64–68.8 °C. Reusability tests confirmed the catalyst's durability across multiple cycles, with E-factor values indicating an eco-friendly process. FTIR analyses validated the successful biodiesel synthesis, with properties conforming to ASTM D6751 and EN 14214 standards., Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Cu(BTC)-(TMIB)-PAN membrane as an innovative method for pathogen disinfection and pharmaceutical degradation: study of viability in flow systems

  • Giráldez Rodríguez, Alba
  • Díez Sarabia, Aida Maria
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
Nowadays, water quality is increasingly at risk due to human activities, climate change and the emergence of new pollutants, including pharmaceuticals and pathogens. Advanced oxidation processes, particularly those involving peroxymonosulphate (PMS) activation by heterogeneous catalyst have garnered significant attention from the scientific community. In this context, metal-organic frameworks (MOFs) have demonstrated considerable potential as catalysts for PMS activation. In this research, a copper-based MOF, Cu(BTC)-(TMIB), was successfully synthesized using 1,3,5-Tris(1H-imidazol-1-yl)methylbenzene (TMIB) and 1,3,5-benzenetricarboxylic acid (BTC) as ligands. Novel use of Cu(BTC)-(TMIB) as a PMS catalyst shows strong activity and efficient sulphate radical generation. To enhance stability and operational control in continuous water treatment processes, Cu(BTC)-(TMIB) was immobilized onto polyacrylonitrile (PAN) nanofibre membranes via electrospinning. Membrane performance was validated in both batch and continuous flow systems. In batch experiments, the 3 %Cu(BTC)-(TMIB)-9 %PAN membrane achieved the required pathogen inactivation in 15 min, complete destruction of clozapine in <1 hour and complete antipyrine removal in <24 h. Under continuous flow conditions, the system operated stably for 216 h, performing 36 cycles with a constant and high-efficient pathogen and contaminant removal., Universidade de Vigo/CISUG, Agencia Estatal de Investigación | Ref. PCI2022–132941, Agencia Estatal de Investigación | Ref. PID2023–146133NB-I00, Agencia Estatal de Investigación | Ref. RYC2023–044934-I
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Sustainable synthesis of Mangenese cobalt oxide nanocomposite on natural clay and optimization using response surface methodology for ciprofloxacin degradation via peroxymonosulfate activation

  • Hrichi, Amira
  • Abderrahim, Nesrine
  • Amor, Hédi Ben
  • Pazos Currás, Marta María
  • Sanromán Braga, María Ángeles
This study presents an innovative method for preparing of a novel composite by immobilization of cobalt manganese oxide (MnCoO) on natural clay extracted from ElHamma deposit in south of Tunisia (HC) through a co-precipitation technique. The resulting composite, known as MnCoO@HC, was tested for activating peroxymonosulfate (PMS) to break down ciprofloxacin (CIP), an antibiotic commonly found in water bodies. Characterization of MnCoO@HC using techniques like Fourier transform infrared (FTIR), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy SEM and energy dispersive X-ray spectroscopy (EDS) highlighted its robust structural integrity and catalytic properties. The key operational parameters such as pH (3–10), catalyst dosage (200–800 mg/L), PMS concentration (100–400 mg/L), CIP concentration (20–40 mg/L), and temperature (25–55 °C) were optimized using a central composite design. Under optimum conditions of 400 mg/L catalyst, 300 mg/L PMS, and pH 4.4 a remarkable 100 % degradation of CIP was attained within 30 min, with a mineralization efficiency of 58 %. In addition, the catalyst exhibited high efficiency and fast degradation of various pharmaceutical pollutants, including paracetamol (PML) and ibuprofen (IBU). HCO3– common coexisting anion in wastewater was found to inhibit the catalytic activity of MnCoO@HC. Radical scavenging study showed that sulfate radicals (SO4•−) were the primary reactive species involved. The catalyst also showed impressive reusability over three cycles, with only a slight decrease in activity and low metal leaching. This finding demonstrates a straightforward, environmentally friendly, and economic approach to remediating pharmaceutic-contaminated wastewater using PMS-based advanced oxidation processes., Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Universidade de Vigo/CISUG
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

Peroxymonosulfate activation by iron-rich biochar derived from sewage sludge digestate for sulfamethoxazole degradation: A rigorous examination of performance and mechanistic insights

  • Ben Hamou, Aboubakr
  • Escudero Curiel, Silvia
  • Iberache, Noureddine
  • Torres Pinto, André
  • Jada, Amane
  • Pazos Currás, Marta María
  • El Alem, Noureddine
  • Sanromán Braga, María Ángeles
The ubiquitous presence of sulfamethoxazole (SMX) within aquatic ecosystems coupled with the increasing production of solid waste digestate has emerged as a critical environmental challenge. This necessitates the development of efficient decontamination strategies and sustainable waste management approaches. This study introduces iron-doped biochar (FBC-600), synthesized via pyrolysis of sewage sludge digestate (SSD), as an effective catalyst for peroxymonosulfate (PMS) activation to degrade SMX in aqueous media, thereby transforming this waste byproduct into a valuable material for environmental remediation. The FBC-600/PMS system exhibited efficient SMX removal nearly complete within 90 min under optimized conditions. Notably, the system demonstrated robustness against pH variations and the presence of inorganic ions. Mechanistic investigations implicated singlet oxygen (1O2) and electron transfer as predominant reactive oxygen species (ROS). The catalytic performance was attributed to the synergistic interplay of Cdouble bondO, embedded iron, structural defects active sites on the FBC-600 surface. Moreover, the catalyst exhibited exceptional reusability and minimal iron leaching. The transformed products of SMX were examined through density functional theory (DFT) calculations and Liquid Chromatography-Mass Spectrometry (LC-MS). Concomitantly, the estimated toxicity of the identified intermediates was determined to be lower than that of SMX. This study highlights the potential of FBC-600 as a sustainable catalyst for SMX degradation by valorizing industrial bio-digestate according to zero-waste principles, which aim to minimize waste through strategies such as, reusing, reducing, recycling, refusing and composting., Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, Agencia Estatal de Investigación | Ref. PCI2022-132941, Universidade de Vigo/CISUG, Xunta de Galicia | Ref. ED431C 2021–43, Fundação para a Ciência e a Tecnologia | Ref. UID/ 50020/2025, Fundação para a Ciência e a Tecnologia | Ref. LA/P/0045/2020, European Union
Investigo. Repositorio Institucional de la Universidade de Vigo
Publicación Artículo científico (JournalArticle)

PMS activation via alginate cross-linked TiO2 hybridized peanut shells biochar under visible light for boosted pharmaceutical pollutants oxidation

  • Zouggari, Hamid
  • Mahir, Fatima Zahra
  • Díez Sarabia, Aida Maria
  • Djellabi, Ridha
  • Sanromán Braga, María Ángeles
  • Albourine, Abdallah
  • Pazos Currás, Marta María
Water contamination by persistent pharmaceuticals, such as the antibiotic sulfamethoxazole (SMX), poses a significant threat to aquatic ecosystems and human health. Simultaneously, much agricultural waste remains underutilized as a potential sustainable resource. Peanut shells were converted into biochar (PSB) and subsequently hybridized with TiO2 nanoparticles to catalyze peroxymonosulfate (PMS) under visible light for the oxidation of the SMX. PSB@TiO2 was fabricated using a 3D sodium alginate (Alg) cross-linked matrix, which acts as a stabilizing scaffold and an active contributor to pollutant adsorption and charge transfer enhancement, obtaining Alg-PSB@TiO2. The Ti-O-C interfacial bridge formed between PSB and TiO2 particles plays a crucial role in absorbing visible light and redox charge transfer. In the presence of PMS, 99.9% SMX degradation was achieved within 90 min by Alg-PSB@TiO2 under simulated sunlight, with a photocatalytic performance of 6.13, 4.01, and 1.14 times higher than bare PSB, TiO2, and PSB@TiO2, respectively. Quenching tests demonstrate that h+, SO4 •- , • OH, 1 O2, e- and • O2 - were produced and contributed to SMX degradation, wherein h+, SO4 •- , e- are the primary reactive species. Stability and recycling tests proved that Alg-PSB@TiO2 photocatalyst sustained 90.6% efficiency after six cycles, exhibiting superior stability compared to most bead-based and powdered catalysts, with undetectable Ti leaching. In addition, LC–MS analysis and ECOSAR predictions indicate that the degradation pathways substantially reduce the toxicity of transformation products. Collectively, this work establishes the biochar–TiO2 hybrid immobilized on Alg beads as a highly efficient, reusable, and environmentally safe photocatalyst for PMS activation., Agencia Estatal de Investigación | Ref. PID2023-146133NB-I00, UK Research and Innovation | Ref. PCI2022-132941, Agencia Estatal de Investigación | Ref. RYC2023-044934-I, Universidade de Vigo/CISUG