Pasar al contenido principal

COMBUSTIBLE DE AVIACION SOSTENIBLE A PARTIR DE GLICERINA Y RESIDUOS SOLIDOS URBANOS

PID2020-114985RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aqueous phase hydrogenolysis of glycerol with in situ generated hydrogen over Ni/Al3Fe1 catalyst: effect of the calcination temperature

  • Raso, Raquel
  • Lete, Alejandro
  • García, Lucía
  • Ruiz, Joaquín
  • Oliva, Miriam
  • Arauzo, Jesús
The present work studied the influence of the calcination temperature on the aqueous phase hydrogenolysis of glycerol with in situ generated hydrogen over a Ni/Al3Fe1 catalyst. The Ni/Al3Fe1 catalyst was synthesized by the co-precipitation method at 28 mol% of Ni (Ni/(Ni + Al + Fe)) and a molar ratio of Al/Fe of 3/1. The prepared catalyst was calcined at different temperatures (500–750 °C). The obtained samples were tested for the aqueous phase hydrogenolysis (APH) of glycerol and characterized by several analytical techniques (ICP-OES, H2-TPR, XRD, N2-physisorption, NH3-TPD, STEM, FESEM, and TGA). The catalyst calcined at 625 °C was selected as the best sample due to its high acidity, metal dispersion, and catalytic activity; 1,2-propanediol was the highest carbon selectivity product. In addition, it experienced lower metal leaching than the catalyst calcined at 500 °C
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Renewable hydrogen production by aqueous phase reforming of pure/refined crude glycerol over Ni/Al-Ca catalysts

  • Raso, Raquel
  • Abad, Eduardo
  • García, Lucía
  • Ruiz, Joaquín
  • Oliva, Miriam
  • Arauzo, Jesús
Renewable hydrogen production by aqueous phase reforming (APR) over Ni/Al-Ca catalysts was studied using pure or refined crude glycerol as feedstock. The APR was carried out in a fixed bed reactor at 238 °C, 37 absolute bar for 3 h, using a solution of 5 wt.% of glycerol, obtaining gas and liquid products. The catalysts were prepared by the co-precipitation method, calcined at different temperatures, and characterized before and after their use by several techniques (XRD, ICP-OES, H2-TPR, NH3-TPD, CO2-TPD, FESEM, and N2-physisorption). Increasing the calcination temperature and adding Ca decreased the surface area from 256 to 188 m2/g, and its value after the APR changed depending on the feedstock used. The properties of the acid and basic sites of the catalysts influenced the H2 yield also depending on the feed used. The Ni crystallite was between 6 and 20 nm. In general, the incorporation of Ca into Ni-based catalysts and the increase of the calcination temperature improved H2 production, obtaining 188 mg H2/mol C fed during the APR of refined crude glycerol over Ni/AlCa-675 catalyst, which was calcined at 675 °C. This is a promising result from the point of view of enhancing the economic viability of biodiesel.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Synthesis of ketones from glycerol and 1,2-propanediol using copper and nickel catalysts: Unraveling the impact of reaction phase and active metal

  • Lete, Alejandro
  • Raso, Raquel
  • García, Lucía
  • Ruiz, Joaquín
  • Arauzo, Jesús
Catalysts based on nickel-aluminum and copper–aluminum were synthesized through the coprecipitation method with a Ni or Cu content of 28 mol%, expressed as Ni/(Ni + Al) or Cu/(Cu + Al). The catalysts were calcined at 675 °C and thoroughly analyzed using various characterization techniques (ICP-OES, N2 adsorption–desorption, NH3-TPD, CO2-TPD, XRD, H2-TPR and elemental analysis). The samples were tested in two different reaction systems, gas phase at atmospheric pressure and liquid phase at 34 absolute bar, to investigate the production of ketones from glycerol and 1,2-propanediol under reaction conditions of 227 °C and a mass of catalyst/reagent mass flow rate ratio (W/m) of 10 gCatalyst·min/gReagent. The characterization results revealed catalysts with high specific surface area and nickel and copper metallic particles, exhibiting good catalytic activity towards liquid products. Gas phase reactions favored the generation of acetol and carbon deposits, which were minimal in liquid phase reactions. The active metal played a crucial role, and it was demonstrated that copper, with a higher number of acidic sites, exhibited greater selectivity towards ketones than the nickel catalyst. The best performance was achieved by the CuAl catalyst in the gas phase reaction of glycerol, with a conversion of 67.0 ± 4.0 %, a carbon selectivity to acetol in the liquid products of 61.4 % and a yield to acetol of 119.8 mgAcetol/gGlycerol.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of synthesis conditions on catalytic performance of Ni/CeO2 in aqueous-phase hydrogenolysis of glycerol without external hydrogen input

  • Jarauta-Córdoba, Clara
  • García, Lucía
  • Ruiz, Joaquín
  • Oliva, Miriam
  • Arauzo, Jesús
The aqueous-phase hydrogenolysis of glycerol was studied in Ni/CeO2 catalytic systems prepared by incipient wetness impregnation. The operating conditions were 34 bar, 227 ºC, 5 wt.% of glycerol, and a W/mglycerol = 20 g catalyst min/g glycerol without a hydrogen supply. The effect of the catalyst preparation conditions on the catalytic activity and physicochemical properties of the catalysts was assessed, particularly the calcination temperature of the support, the calcination temperature of the catalyst, and the Ni content. The physicochemical properties of the catalysts were determined by N2 adsorption, H2-TPR, NH3-TPD, and XRD, among other techniques. A relevant increase in acidity was observed when increasing the nickel content up to 20 wt.%. The increase in the calcination temperatures of the supports and catalysts showed a detrimental effect on the specific surface area and acid properties of the catalysts, which were crucial to the selectivity of the reaction. These catalysts notably enhanced the yield of liquid products, achieving global glycerol conversion values ranging from 17.1 to 29.0% and carbon yield to liquids ranging from 12.6 to 24.0%. Acetol and 1,2-propanediol were the most abundant products obtained in the liquid stream.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Catalytic conversion of 1,2-propanediol to 2-propanone: an exploratory study

  • Lete, A.
  • García, L.
  • Ruiz, Joaquín
  • Arauzo, Jesús
Climate change underscores the urgency of exploring novel pathways for the decarbonization of the transportation sector. Within the aviation sector, biofuel appears to be the most viable short-term solution. Recently, the focus has centered on the aldol condensation of biomass-derived furans with ketones as 2-propanone (acetone) or 2-hydroxy-2-propanone (acetol), offering an efficient method to produce intermediates suitable for aviation fuels. However, 2-propanone is currently produced from cumene, a petroleum-derived source. This study proposes 1,2-propanediol (1,2-PDO), a sustainable product obtained by the hydrogenolysis of glycerol, a byproduct of the biodiesel industry, as a renewable feedstock for the generation of 2-propanone. For that purpose, the coprecipitation method with sodium hydroxide was employed to synthesize three copper, zinc, and aluminum-based catalysts. The catalysts were characterized through ICP-OES, N2 adsorption-desorption, XRD, and H2-TPR. The dehydration of 1,2-PDO to 2-propanone was investigated in a continuous system at 227 ºC, using a 10 wt% aqueous solution of 1,2-PDO at atmospheric pressure with a W/m ratio of 10 gCatalyst min g1,2-PDO-1. The catalyst with the lower zinc content achieved the highest carbon selectivity to 2-propanone at 22.1% and generated 1845 µmol2-propanone/mol1,2-PDO. This study revealed that lower zinc content could enhance 1,2-PDO dehydration to 2-propanone, preventing the subsequent hydrogenation of 2-propanone to 2-propanol. Additional optimization is required to attain higher yields.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Effect of calcination temperature and atmosphere on the properties and performance of CuAl catalysts for glycerol dehydration to acetol

  • Lete, Alejandro
  • Lacleta, Francisco
  • García, Lucía
  • Ruiz, Joaquín
  • Arauzo, Jesús
A series of CuAl catalysts were prepared by the coprecipitation method. The objective of this study was to investigate the influence of different calcination temperatures (500, 600, and 675 °C) and calcination atmospheres (N2 or air) on the catalysts physicochemical properties and performance in the gas-phase glycerol dehydration to acetol. The catalytic tests were carried out in a fixed bed reactor at 250 °C, atmospheric pressure, and a catalyst weight to glycerol flow rate ratio (W/m) of 30 gCatalyst min gGlycerol−1. The catalysts were characterized by ICP-OES, N2 adsorption-desorption, X-ray diffraction (XRD), H2 temperature programmed reduction (H2-TPR), temperature gravimetric analysis (TGA), and elemental analysis. The characterization results revealed that both calcination temperature and calcination atmosphere influenced the textural and metallic properties. Increasing the calcination temperature lowered the reduction temperature, and decreased the surface area. The calcination atmosphere influenced the surface area and pore diameter, and the N2 atmosphere generated a larger pore diameter. The best catalytic activity was achieved by the CuAl-675-N catalyst calcined at 675 °C in a N2 atmosphere, which produced a glycerol conversion of 99.0 % and an acetol yield of 67.3 %. The superior performance could be attributed to textural properties, the Cu phase, and minimized carbon deposition, establishing it as one efficient catalyst derived from inexpensive and widely available metals. This work proposes an economical and simple technique based on calcination to improve the catalytic activity of Cu-based catalysts.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aqueous phase hydrogenolysis of glycerol with in-situ hydrogen generation over Ni catalysts supported on activated carbon: Effects of nickel loading and base addition

  • Raso, R.
  • García, L.
  • Ruiz, J.
  • Oliva, M.
  • Arauzo, J.
The present work studied the influences of nickel loading and KOH addition on the aqueous phase hydrogenolysis of glycerol over nickel supported on activated carbon (Ni/AC) catalysts prepared by the incipient wetness impregnation method and without external hydrogen addition in a continuous operation. It has been observed that the calcination stage of the catalytic precursor reduces nickel oxide to dispersed nickel metal crystallites, making catalyst activation with hydrogen unnecessary. This process predominantly yields liquid products, with low gas production under the studied conditions. Among the produced liquids, acetol and 1,2-propanediol are the major components. Furthermore, the addition of a base (KOH) is beneficial both in terms of significantly increasing glycerol conversion and the yield to liquids and also to improve selectivity towards 1,2-propanediol due to the participation of the basic route. The best catalytic activity was achieved using the catalyst with 10 wt% of Ni and added base with the highest glycerol conversion close to 40 % and selectivity to 1,2-propanediol greater than 70 %.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Selective Conversion of Glycerol to Acetol: Effect of the Preparation Method of CuAl Catalysts and Reaction Phase

  • Maldonado-Martín, Francisco
  • García, Lucía
  • Ruiz, Joaquín
  • Oliva, Miriam
  • Arauzo, Jesús
A group of CuAl catalysts were synthesized with a Cu/Al molar ratio of 1:1 using different preparation methods: coprecipitation, surfactant assisted coprecipitation, polymeric precursor, and self-combustion and then screened for the selective dehydration of glycerol to acetol. The catalysts were employed in glycerol conversion at the same temperature (227 °C) in two different laboratory-scale systems, the first one at atmospheric pressure (gas phase) and the second one in a pressurized system at 34 absolute bar (liquid phase). The preparation method of the CuAl catalysts influenced the carbon yield to liquids and acetol selectivity. However, the reaction phase had a greater influence than the preparation method of the catalyst. In the gas phase, the carbon yield to liquids reached values above 40% and the carbon selectivity to acetol was higher than 90%. The highest acetol yield, 462.6 mgacetol/gglycerol, was obtained with the CuAl catalyst prepared by the surfactant-assisted coprecipitation method. This study provides a new perspective on catalyst design by highlighting the crucial role of preparation techniques in determining CuAl catalyst performance in the liquid and gas phases.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Valorization of pure and biodiesel-derived refined crude glycerol to renewable acetol over copper-based catalyst: Effect of operating conditions and catalyst stability

  • Lete, Alejandro
  • García, Lucía
  • Ruiz, Joaquín
  • Arauzo, Jesús
Acetol is a key intermediate in the aldol condensation of biomass-derived furans, enabling the production of carbon chains within the aviation fuel range. This work proposes glycerol, a biomass-derived by-product from biodiesel production, as a renewable feedstock for acetol production. The catalytic performance of a CuAl catalyst was evaluated in the gas phase dehydration of glycerol, focusing on the influence of temperature (200–300 °C), catalyst weight to glycerol mass flow ratio (10–50 gCatalyst min gGlycerol−1), and carrier gas to liquid ratio (200–600 m3GasSTP m3Liquid−1). Both pure and biodiesel-derived refined crude glycerol were used as feedstock. Long-term stability experiments assessed the evolution of catalytic activity and physicochemical properties over time. A great activity was obtained under conditions of 250 °C, 30 gCatalyst min gGlycerol−1, and 400 m3GasSTP m3Liquid−1 with pure glycerol after a time-on-stream (TOS) of 2 h (95.1 % glycerol conversion and 564 mgAcetol gGlycerol−1). Stability studies provided good catalytic results after a TOS of 52 h using pure glycerol (72 % glycerol conversion and 266 mgAcetol gGlycerol−1) and demonstrated that coke deposition was responsible for catalyst deactivation. The use of refined crude glycerol proved to be highly effective in the first hours of the reaction (98.7 % glycerol conversion and 570 mgAcetol gGlycerol−1 for a TOS of 2 h), however, rapid deactivation was observed due to solids deposition. This catalytic route highlights the feasibility of valorization of biomass residues for producing renewable acetol, a promising precursor for sustainable aviation fuel (SAF).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Comparative study of the effects of reactor system and catalysts on glycerol valorisation via aqueous-phase reforming

  • Alves, Carine T.
  • Maldonado-Martín, Francisco
  • Lete, Alejandro
  • Hashemnezhad, Seyed Emad
  • García, Lucía
  • Onwudili, Jude A.
The conversion of glycerol through aqueous phase reforming (APR) presents an important opportunity for sustainable chemical and fuel production. This study explores the APR of glycerol using three catalysts (nickel supported on alumina (NiAl), copper supported on alumina (CuAl), and bimetallic nickel-iron supported on alumina (NiAlFe)), synthesized via the coprecipitation method. The APR experiments were conducted in both batch and fixed-bed reactors. In the batch reactor, a 75 mL Parr reactor was utilised, operating at 238 °C and 5 bar initial nitrogen pressure with 20 mL of a 5 wt% glycerol solution and 0.3 g of catalyst (catalyst/glycerol mass ratio = 0.3). The fixed-bed reactor was made of a stainless steel tube loaded with 2 g of catalyst, operating at 238 °C and 37 bar, with a continuous feed of 5 wt% glycerol solution, equivalent to catalyst/glycerol mass ratio of 0.33. NiAl produced the highest conversion of glycerol to gases and the highest yield of hydrogen (230 mg H2/mol C fed). However, among the tested catalysts, NiAlFe demonstrated superior performance, achieving a carbon yield to total products (liquid and gases) of approximately 80 % in the batch reactor as well as a relatively high hydrogen yield (141 mg H2/mol C fed). These results underscore the promising potential of the NiAlFe catalyst for efficient glycerol conversion in APR processes, paving the way for advancements in sustainable fuel and chemical production.