Pasar al contenido principal

AVANCES HACIA LA COMERCIALIZACION DEL PROCESADO ACUOSO A PRESION (PAP) DE GLICERINA

CTQ2017-86893-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE ZARAGOZA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 9
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Study of ni/al-fe catalyst stability in the aqueous phase hydrogenolysis of glycerol

  • Raso, R.
  • García, L.
  • Ruiz, J.
  • Oliva, M.
  • Arauzo, J.
The present work studied the stability and reusability of Ni/Al-Fe catalyst in the aqueous phase hydrogenolysis of glycerol without external hydrogen addition. The catalyst based on 28 molar % of Ni with 3/1 molar ratio of Al/Fe was prepared through co-precipitation. This catalyst presented the best performance in our last study which compares several Ni/Al-Fe catalysts with different molar ratios of Al/Fe. To see the influence of the pressurized water on the physicochemical characteristics of Ni/Al-Fe catalyst, a test of up to 9 h has been carried out. Fresh and used catalysts were characterized by various techniques: X-ray Diffraction (XRD), N2-physisorption, field emission scanning electron microscopy (FESEM) and STEM. Glycerol conversion and carbon yield to gases and liquids did not vary significantly when compared at 3 h and 9 h. Furthermore, the morphology of the catalyst remains stable after continuous recycling under severe hydrothermal conditions. The nickel rich phase of the catalyst, which was determined by XRD and scanning transmission electron microscopy (STEM) techniques, showed a stable size after 9 h under reaction.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Glycerol conversion to valuable products by pressure aqueous processing using ni-al-fe catalysts

  • Raso, R.
  • Ruíz, J.
  • Oliva, M.
  • García, L.
  • Arauzo, J.
The present work studied the pressure aqueous processing of glycerol (by-product of biodiesel) without external hydrogen addition to produce value-added products. A series of Ni catalysts supported on Al2O3 and Fe as promoter were prepared through co-precipitation technique by changing the Fe/Al ratio (0, 25 and 75% molar). The prepared samples were characterized by several techniques (XRD, H2-TPR, N2 adsorption and ICP-OES). All the catalysts showed a low carbon conversion to gas and high carbon conversion to liquid products mainly 1, 2-propanediol, acetol and ethylene glycol. This work demonstrates the effects of the molar ratio of Fe/Al on physicochemical characteristics of Ni-Al-Fe catalysts and during the pressure aqueous processing (PAP) of glycerol to value-added products. El presente trabajo estudió el procesamiento acuoso a presión de glicerol (subproducto del biodiesel) sin adición externa de hidrógeno para producir productos de valor agregado. Se prepararon una serie de catalizadores de Ni soportados sobre Al2O3 y Fe como promotor mediante la técnica de coprecipitación cambiando la relación Fe/Al (0, 25 y 75% molar). Las muestras preparadas se caracterizaron mediante varias técnicas (DRX, H2-TPR, adsorción de N2 e ICP-OES). Todos los catalizadores mostraron una baja conversión de carbono a gas y una alta conversión de carbono a productos líquidos, principalmente 1,2-propanodiol, acetol y etilenglicol. Este trabajo demuestra los efectos de la relación molar de Fe/Al sobre las características fisicoquímicas de los catalizadores de Ni-Al-Fe y durante el procesamiento acuoso a presión (PAP) de glicerol para obtener productos de valor agregado.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Hydrogenolysis of glycerol with external h2 supply as value-added liquid chemicals source

  • Jarauta-Córdoba, C.
  • Ehrmaier, A.
  • Denk, C.
  • Lercher, J.A.
  • García, L.
  • Ruíz, J.
  • Arauzo, J.
The hydrogenolysis process of glycerol with external H2 supply has been studied using Ni-exchanged zeolites (FAU, LTA, ZSM-5). The reaction temperature and the oxidation state of the active phase were investigated in this work. Ni/zeolite catalysts were tested for 3 hours in a batch reactor, at different temperatures between 200 and 250 ºC and at 33 bar of initial H2 pressure. A water solution of 5 wt.% glycerol was used as a feedstock. The liquid products collected were analyzed afterwards by GC-MS and GC-FID. Several catalyst characterization techniques were performed: N2 physisorption, XRD, AAS, NH3-TPD and FTIR of adsorbed probe molecule (pyridine or NH3). The relevance of the metallic function for the hydrogenation reaction was proved. In most cases, the increase of the reaction temperature between 200 and 250 ºC implies a steady increase in the glycerol conversion and in the carbon conversion to liquid products, both for the reduced and non-reduced catalysts. The temperature also influences the selectivity to liquid products. Moreover, some temperatures were proposed as optimal for the production of certain liquids under these conditions. El proceso de hidrogenólisis del glicerol con suministro externo de H2 se ha estudiado utilizando zeolitas intercambiadas con Ni (FAU, LTA, ZSM-5). En este trabajo se investigaron la temperatura de reacción y el estado de oxidación de la fase activa. Los catalizadores de Ni/zeolita se probaron durante 3 horas en un reactor discontinuo, a diferentes temperaturas entre 200 y 250 ºC y a 33 bar de presión inicial de H2. Se utilizó como materia prima una solución acuosa de 5% en peso de glicerol. Los productos líquidos recogidos se analizaron posteriormente mediante GC-MS y GC-FID. Se realizaron varias técnicas de caracterización de catalizadores: fisisorción de N2, XRD, AAS, NH3-TPD y FTIR de la molécula sonda adsorbida (piridina o NH3). Se demostró la relevancia de la función metálica para la reacción de hidrogenación. En la mayoría de los casos, el aumento de la temperatura de reacción entre 200 y 250 ºC implica un aumento constante en la conversión de glicerol y en la conversión de carbono a productos líquidos, tanto para los catalizadores reducidos como para los no reducidos. La temperatura también influye en la selectividad hacia los productos líquidos. Además, se propusieron algunas temperaturas como óptimas para la producción de determinados líquidos en estas condiciones.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of the Ni-Co/Al-Mg catalyst loading in the continuous aqueous phase reforming of the bio-oil aqueous fraction

  • Lozano, P.
  • Simón, A.I.
  • García, L.
  • Ruiz, J.
  • Oliva, M.
  • Arauzo, J.
The effect of catalyst loading in the Aqueous Phase Reforming (APR) of bio-oil aqueous fraction has been studied with a Ni-Co/Al-Mg coprecipitated catalyst. Because of the high content of water in the bio-oil aqueous fraction, APR could be a useful process to convert this fraction into valuable products. Experiments of APR with continuous feeding of aqueous solution of acetol, butanol and acetic acid as the only compound, together with a simulated and a real aqueous fraction of bio-oil, were carried out. Liquid products in the liquid effluent of the APR model compounds were quantified and the reaction pathways were revised. The increase of catalyst loading produced an increase of gas production and a gas with higher alkanes content. Acetol was the compound with the highest reactivity while the conversion of acetic acid was very low. The presence of acetic acid in the feed caused catalyst deactivation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aqueous phase hydrogenolysis of glycerol with in situ generated hydrogen over Ni/Al3Fe1 catalyst: effect of the calcination temperature

  • Raso, Raquel
  • Lete, Alejandro
  • García, Lucía
  • Ruiz, Joaquín
  • Oliva, Miriam
  • Arauzo, Jesús
The present work studied the influence of the calcination temperature on the aqueous phase hydrogenolysis of glycerol with in situ generated hydrogen over a Ni/Al3Fe1 catalyst. The Ni/Al3Fe1 catalyst was synthesized by the co-precipitation method at 28 mol% of Ni (Ni/(Ni + Al + Fe)) and a molar ratio of Al/Fe of 3/1. The prepared catalyst was calcined at different temperatures (500–750 °C). The obtained samples were tested for the aqueous phase hydrogenolysis (APH) of glycerol and characterized by several analytical techniques (ICP-OES, H2-TPR, XRD, N2-physisorption, NH3-TPD, STEM, FESEM, and TGA). The catalyst calcined at 625 °C was selected as the best sample due to its high acidity, metal dispersion, and catalytic activity; 1,2-propanediol was the highest carbon selectivity product. In addition, it experienced lower metal leaching than the catalyst calcined at 500 °C
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Aqueous phase hydrogenolysis of glycerol over Ni/Al-Fe catalysts without external hydrogen addition

  • Raso, R.
  • García, L.
  • Ruiz, J.
  • Oliva, M.
  • Arauzo, J.
The present work studied the aqueous phase hydrogenolysis (APH) of glycerol (a by-product of biodiesel manufacturing) without external hydrogen addition to produce value-added products. A series of catalysts based on 28 molar % of Ni were prepared through co-precipitation by changing the Al/Fe molar ratio. The calcined and used catalysts were characterized by several techniques (ICP-OES, N2-physisorption, XRD, H2-TPR, NH3-TPD, FESEM and STEM). This work examines the effects of the molar ratio of Al/Fe on the physicochemical characteristics of Ni/Al-Fe catalysts and during the APH of glycerol. All the catalysts showed low carbon yields to gases and high carbon yields to liquid products, mainly 1, 2-propanediol, acetol and ethylene glycol. Ni/Al3Fe1 catalyst gave the best performance in the APH of glycerol: the highest glycerol conversion (42.31 %), carbon yield to gases (6.57 %) and carbon yield to liquids (30.45%). 1, 2-propanediol was the liquid product with the highest carbon selectivity (70.89%).
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of operating variables on the aqueous-phase reforming of glycerol over a Ni/Al coprecipitated catalyst

  • García, L.
  • Valiente, A.
  • Oliva, M.
  • Ruiz, J.
  • Arauzo, J.
A systematic study focused on the aqueous-phase reforming of glycerol has been carried out in order to analyze the influence of several operating variables (system pressure, reaction temperature, glycerol content in feed, liquid feeding rate and catalyst weight/glycerol flow rate ratio) on the gas and liquid products. A continuous flow bench scale installation and a Ni/Al coprecipitated catalyst were employed. The system pressure was varied from 28 to 40 absolute bar, the reaction temperature was analyzed from 495 to 510 K, the glycerol content in the feed was studied from 2 to 10 wt%, the liquid feeding rate was changed from 0.5 to 3.0 mL/min and the catalyst weight/glycerol flow rate ratio varied from 10 to 40 g catalyst min/g glycerol. The main gas products obtained were H2, CO2 and CH4, while the main liquid products were 1, 2-propanediol, ethylene glycol, acetol and ethanol. A W/mglycerol ratio of 40 g catalyst min/g glycerol, 34 bar, 500 K, 5 wt% glycerol and 1 mL/min, resulted in a high yield to H2 (6.8%), the highest yield to alkanes (10.7%), the highest 1, 2-propanediol yield (0.20 g/g glycerol) and the highest ethylene glycol yield (0.11 g/g glycerol). The highest acetol yield (0.06 g/g glycerol) was obtained at 34 bar, 500 K, 5 wt% glycerol, 20 g catalyst min/g glycerol and 3 mL/min.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

An insight into the separation of 1, 2-propanediol, ethylene glycol, acetol and glycerol from an aqueous solution by adsorption on activated carbon

  • Fortea J.
  • García L.
  • Ruiz J.
  • Oliva M.
  • Arauzo J.
Glycerol conversion processes such as aqueous phase reforming and hydrogenolysis generate value-added compounds highly diluted in water. Because distillation is a high energy demand separation step, adsorption could be an attractive alternative to recover these chemicals. Adsorption isotherms of 1, 2-propanediol, acetol, ethylene glycol and glycerol onto activated carbon were determined by batch adsorption experiments. These isotherms were fitted slightly better to the Freundlich equation than to the Langmuir equation. Acetol is the compound with the highest adsorption at concentrations smaller than 1 M. Properties of the adsorbate such as the -OH group number, chain length, molecular size and dipole moment, besides characteristics of the adsorbent such as the surface area, oxygen and ash content, are considered to explain the observed results. Moreover, adsorption experiments were performed with mixtures of compounds and it was determined that the molar amount adsorbed is less than predicted from the adsorption isotherms of the individual compounds treated separately. In addition, the influence of the activated carbon thermal pretreatment temperature on the adsorption capacity has been studied, the optimum being 800¿C. An analysis of the influence of the activated carbon characteristics showed that the most important parameters are the total pore volume and the ash content. © 2021 by the authors. Licensee MDPI, Basel, Switzerland.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Influence of synthesis conditions on catalytic performance of Ni/CeO2 in aqueous-phase hydrogenolysis of glycerol without external hydrogen input

  • Jarauta-Córdoba, Clara
  • García, Lucía
  • Ruiz, Joaquín
  • Oliva, Miriam
  • Arauzo, Jesús
The aqueous-phase hydrogenolysis of glycerol was studied in Ni/CeO2 catalytic systems prepared by incipient wetness impregnation. The operating conditions were 34 bar, 227 ºC, 5 wt.% of glycerol, and a W/mglycerol = 20 g catalyst min/g glycerol without a hydrogen supply. The effect of the catalyst preparation conditions on the catalytic activity and physicochemical properties of the catalysts was assessed, particularly the calcination temperature of the support, the calcination temperature of the catalyst, and the Ni content. The physicochemical properties of the catalysts were determined by N2 adsorption, H2-TPR, NH3-TPD, and XRD, among other techniques. A relevant increase in acidity was observed when increasing the nickel content up to 20 wt.%. The increase in the calcination temperatures of the supports and catalysts showed a detrimental effect on the specific surface area and acid properties of the catalysts, which were crucial to the selectivity of the reaction. These catalysts notably enhanced the yield of liquid products, achieving global glycerol conversion values ranging from 17.1 to 29.0% and carbon yield to liquids ranging from 12.6 to 24.0%. Acetol and 1,2-propanediol were the most abundant products obtained in the liquid stream.