Pasar al contenido principal

MEJORA DEL RENDIMIENTO FOTOCATALITICO Y DE LA SOSTENIBILIDAD MEDIOAMBIENTAL EN PROCESOS DE TRATAMIENTO DE AGUAS MEDIANTE CAMPOS MAGNETICOS.

PID2020-116321RB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD PUBLICA DE NAVARRA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Antibacterial performance of Co–Zn ferrite nanoparticles under visible light irradiation

  • Gubieda, Alicia G.
  • Abad-Díaz-de-Cerio, Ana
  • García-Prieto, Ana
  • Fdez-Gubieda, M. Luisa
  • Cervera-Gabalda, Laura
  • Ordoqui-Huesa, Eduardo
  • Cornejo, Alfonso
  • Gómez-Polo, Cristina
[Background] To address water scarcity and promote sustainable resource management, more efficient and cost-effective water treatment solutions are necessary. Particularly, pathogens in drinking water are a topic of growing concern. One promising technology is the use of photocatalytic nanoparticles activated by visible light as antibacterial agents. This study focuses on the characterization and antibacterial properties of Co–Zn ferrite nanocatalysts, tested against Escherichia coli., [Results] The CoxZn1−xFe2O4 (x = 0, 0.1, 0.4 and 0.6) ferrites were synthesized by the co-precipitation method. Structural, morphological and optical analyses confirmed that these nanoparticles have a cubic spinel structure, with sizes of around 10 nm, and band gap energies suitable for visible light activation (1.4–1.7 eV). The antibacterial efficacy of the nanoparticles against E. coli was tested and compared with their photocatalytic performance employing phenol as organic pollutant model (highest phenol degradation for x = 0.6). Specifically, the antibacterial capacity of these nanoparticles was evaluated by comparing the ability of bacteria to grow after being incubated with the nanoparticles under visible light and in the dark. It was found that nanoparticles with lower cobalt content (x = 0 and 0.1) significantly reduced bacterial culturability under visible light. Transmission Electron Microscopy analysis revealed that nanoparticles with cobalt content caused bacteria to secrete biofilm, potentially offering some protection against the nanoparticles., [Conclusion] ZnFe2O4 nanoparticles show the highest antibacterial effect amongst those tested. This is attributed to the combined action of Zn2+ ion release and the photocatalytic effect under visible light. Furthermore, Zn might inhibit protective biofilm secretion, leading to higher antibacterial effects. © 2024 The Author(s). Journal of Chemical Technology and Biotechnology published by John Wiley & Sons Ltd on behalf of Society of Chemical Industry (SCI)., The work has been performed under grants IT1479-22 funded by the Basque Government and PID2020-116321RB-C21 funded by MCIN/AEI/10.13039/501100011033. The authors acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza for the microscopy. The authors thank SGIker (UPV/EHU/ERDF, EU) service for their technical and human support, especially the Phytotron; Analytic and High Resolution Microscopy in Biomedicine; and IBERCRON Services., Peer reviewed
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Antibacterial performance of Co-Zn ferrite nanoparticles under visible light irradiation

  • Gubieda, Alicia G.
  • Abad Díaz de Cerio, Ana
  • García-Prieto, Ana
  • Fernández-Gubieda, María Luisa
  • Cervera Gabalda, Laura María
  • Ordoqui Huesa, Eduardo
  • Cornejo Ibergallartu, Alfonso
  • Gómez Polo, Cristina
BACKGROUND: To address water scarcity and promote sustainable resource management, more efficient and cost-effective water treatment solutions are necessary. Particularly, pathogens in drinking water are a topic of growing concern. One promising technology is the use of photocatalytic nanoparticles activated by visible light as antibacterial agents. This study focuses on the characterization and antibacterial properties of Co-Zn ferrite nanocatalysts, tested against Escherichia coli. RESULTS: The CoxZn1¿xFe2O4 (x = 0, 0.1, 0.4 and 0.6) ferrites were synthesized by the co-precipitation method. Structural, morphological and optical analyses confirmed that these nanoparticles have a cubic spinel structure, with sizes of around 10 nm, and band gap energies suitable for visible light activation (1.4¿1.7 eV). The antibacterial efficacy of the nanoparticles against E. coli was tested and compared with their photocatalytic performance employing phenol as organic pollutant model (highest phenol degradation for x = 0.6). Specifically, the antibacterial capacity of these nanoparticles was evaluated by comparing the ability of bacteria to grow after being incubated with the nanoparticles under visible light and in the dark. It was found that nanoparticles with lower cobalt content (x = 0 and 0.1) significantly reduced bacterial culturability under visible light. Transmission Electron Microscopy analysis revealed that nanoparticles with cobalt content caused bacteria to secrete biofilm, potentially offering some protection against the nanoparticles. CONCLUSION: ZnFe2O4 nanoparticles show the highest antibacterial effect amongst those tested. This is attributed to the combined action of Zn2+ ion release and the photocatalytic effect under visible light. Furthermore, Zn might inhibit protective biofilm secretion, leading to higher antibacterial effects., The work has been performed under grants IT1479-22 funded by the Basque Government and PID2020-116321RB-C21 funded by MCIN/AEI/10.13039/501100011033.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Modulating photocatalytic activity of nitrogen doped TiO2 nanoparticles via magnetic field

  • Gómez Polo, Cristina
  • Cervera Gabalda, Laura María
  • Garayo Urabayen, Eneko
  • Beato López, Juan Jesús
  • Pérez de Landazábal Berganzo, José Ignacio
The effect of the magnetic field on the photocatalytic activity of TiO2-based nanoparticles is analyzed using a magnetically-assisted photoreactor with permanent magnets to generate a controlled uniform magnetic field, B (¿82 mT). Nitrogen doped TiO2 nanoparticles (sizes around 10 nm) were synthesized through a solvothermal method employing Ti(IV) butoxide and HNO3 (x = 0, 0.5, 1, 1.5 and 2 mL) as precursors and their structural, optical and magnetic properties were analyzed. Specifically, nitrogen doping is confirmed through Hard X-ray Photoelectron Spectroscopy (HAXPES) in those samples synthesized with low HNO3 concentrations (x = 0.5, 1). The correlation between spin polarization (magnetic susceptibility) and visible photocatalytic activity (methyl orange as a model organic pollutant) is particularly analyzed. Surprisingly, opposite effects of the magnetic field on the photocatalytic performance are found in the visible range (above 400 nm) or under UV-Vis irradiation (decrease and increase in the photocatalytic activity, respectively, under magnetic field). The Langmuir-Hinshelwood model allows us to conclude that the strong decrease in adsorption under the magnetic field (around 42 % for x = 0.5) masks the increase in the kinetic constant (close to 58 % for x = 0.5) related mainly to the effect of Lorentz forces on the reduction of the electron-hole recombination., The work has been performed under grant PID2020-116321RB-C21 funded by MCIN/AEI/10.13039/501100011033. Open access funding provided by Universidad Pública de Navarra.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Magnetic carbon Fe3O4 nanocomposites synthesized via magnetic induction heating

  • Cervera Gabalda, Laura María
  • Gómez Polo, Cristina
Magnetic Induction Heating (MIH) of magnetite nanoparticles is employed as a novel synthesis procedure of carbon based magnetic nanocomposites. Magnetic nanoparticles (Fe3O4) and fructose (1:2 weight ratio) were mechanically mixed and submitted to a RF magnetic field (305 kHz). The heat generated by the nanoparticles leads to the decomposition of the sugar and to the formation of an amorphous carbon matrix. Two sets of nanoparticles, with mean diameter sizes of 20 and 100 nm, are comparatively analysed. Structural (X-ray diffraction, Raman spectroscopy, Transmission Electron Microscopy (TEM)), electrical and magnetic (resistivity, SQUID magnetometry) characterizations confirm the nanoparticle carbon coating through the MIH procedure. The percentage of the carbonaceous fraction is suitably increased controlling the magnetic heating capacity of the magnetic nanoparticles. The procedure enables the synthesis of multifunctional nanocomposites with optimized properties to be applied in different technological fields. Particularly, Cr (VI) removal from aqueous media is presented employing the carbon nanocomposite with 20 nm Fe3O4 nanoparticles., The research was funded by MCIN/AEI/10.13039/501100011033, Grant PID2020-116321RB-C21. L. Cervera-Gabalda acknowledges Public University of Navarre for her PhD contract “Contratos Pre-doctorales adscritos a Grupos e Institutos de Investigación de la Universidad Pública de Navarra”.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Contribución de congreso (ConferenceOutput)

Magnetic-field-assisted photocatalysis of N-TiO2 nanoparticles

  • Cervera Gabalda, Laura María
  • Garayo Urabayen, Eneko
  • Beato López, Juan Jesús
  • Pérez de Landazábal Berganzo, José Ignacio
  • Gómez Polo, Cristina
Nitrogen doped TiO2 nanoparticles were synthesized through solvothermal method employing Ti (IV) butoxide and HNO3 as precursors. Structural and optical characterizations confirm their nanometer nature (sizes around 10 nm) and the band-gap energy values in the UV range (3.2 eV). Nitrogen doping enhances the occurrence of optical Urbach tails extending towards the visible region. Visible photocatalytic performance (degradation of methyl orange) is correlated with maximum values in the magnetic susceptibility linked to a magnetic polarization of the anatase structure via defects (oxygen vacancies). The application of magnetic field provides a positive effect (acceleration in reaction kinetics) within the UV-Vis range., The work has been performed under grant PID2020-116321RB-C21 funded by MCIN/AEI/10.13039/501100011033.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Tuning the photocatalytic performance through magnetization in Co-Zn ferrite nanoparticles

  • Cervera Gabalda, Laura María
  • Zielinska-Jurek, Anna
  • Gómez Polo, Cristina
In this work, the link between the photocatalytic performance of Co-Zn ferrite nanoparticles and the net magnetic moment is analyzed. CoxZn1-xFe2O4 nanoparticles (0 ≤ x ≤ 1) were synthesized by co-precipitation method and different physicochemical techniques were employed to characterize the samples (X-ray diffraction, Transmission Electron Microscopy (TEM), BET surface area, Diffuse Reflectance Spectroscopy (DRS), Photoluminescence spectroscopy, Z-potential, SQUID magnetometry). Enhanced photocatalytic degradation (maximum degradation ratios of two emerging pollutants, phenol and toluene) are found in those nanoparticles (0.4 ≤ x ≤ 0.6) with optimum magnetic response (i.e. superparamagnetism at room temperature and high saturation magnetization). The magnetization of the nanoparticles turns out to be the determining factor in the optimization of the photocatalytic response, since there is no clear relationship with other physicochemical parameters (i.e. specific surface area, isoelectric point, band gap energy or photoluminescence). These results support the current field of research related to photocatalytic performance enhancement through magnetic field effects., The work has been performed under grant PID2020-116321RB-C21 funded by MCIN/AEI/ 10.13039/501100011033. Authors would like to acknowledge the use of Servicio General de Apoyo a la Investigación-SAI, Universidad de Zaragoza for the microscopy and X-Ray fluorescence analysis. Diffuse Reflectance Spectroscopy analyses were carried out in the Chemical Synthesis and Homogeneous Catalysis Institute (ISQCH) Universidad de Zaragoza-CSIC. (Dr. Eugenio Vispe). L. Cervera-Gabalda acknowledges Public University of Navarre for her Ph.D contract “Contratos Pre-doctorales adscritos a Grupos e Institutos de Investigación de la Universidad Pública de Navarra” and Government of Navarre “Ayudas al Plan de Formación y de Investigación y Desarrollo (I + D)” for the pre-doctoral research stay support at the Department of Process Engineering and Chemical Technology at Gdansk University of Technology. AZJ acknowledges the Polish National Science Centre (grant no. NCN 2018/30/E/ST5/00845).
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Synthesis, characterization, and application of 2D/2D TiO2-GO-ZnFe2O4 obtained by the fluorine-free lyophilization method for solar light-driven photocatalytic degradation of ibuprofen

  • Malinowska, Izabela
  • Kubica, Pawel
  • Madajski, Piotr
  • Ostrowski, Adam
  • Gómez Polo, Cristina
  • Carvera, Laura
  • Bednarski, Waldemar
  • Zielinska-Jurek, Anna
In this study, we report the potential of 2D/2D TiO2-GO-ZnFe2O4 photocatalyst obtained using the fluorine-free lyophilization technique for the degradation of ibuprofen belonging to the group of active pharmaceutical ingredients (API). The improved ibuprofen degradation under simulated solar light was achieved in the presence of a composite of 2D TiO2 combined with GO and embedded ZnFe2O4, which additionally provides superparamagnetic properties and enables photocatalyst separation after the photodegradation process. After only 20 min of the photodegradation process in the presence of 2D/2D TiO2-GO-ZnFe2O4 composite, more than 90% of ibuprofen was degraded under simulated solar light, leading to non-toxic and more susceptible to biodegradation intermediates. At the same time, photolysis of ibuprofen led to the formation of more toxic intermediates. Furthermore, based on the photocatalytic degradation analysis, the degradation by-products and possible photodegradation pathways of ibuprofen were investigated. The photodegradation tests and electronic spin resonance analyses indicated the significant involvement of superoxide radicals and singlet oxygen in the ibuprofen photodegradation process., This research was financially supported by the Polish National Science Centre, grant no. 2018/30/E/ST5/00845. Grant PID2020-116321RB-C21 funded by MCIN/AEI/ 10.13039/501100011033 is also acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Magnetically recyclable TiO2/MXene/MnFe2O4 photocatalyst for enhanced peroxymonosulphate-assisted photocatalytic degradation of carbamazepine and ibuprofen under simulated solar light

  • Grzegórska, Anna
  • Ofoegbu, Joseph Chibueze
  • Cervera Gabalda, Laura María
  • Gómez Polo, Cristina
  • Sannino, Diana
  • Zielinska-Jurek, Anna
In this study, a novel TiO2/Ti3C2/MnFe2O4 magnetic photocatalyst with dual properties, enabling (i) improved photocatalytic degradation with PMS activation under simulated solar light and (ii) magnetic separation after the degradation process in an external magnetic field was developed and applied for the efficient photodegradation pharmaceutically active compounds (PhACs) frequently present in wastewater and surface waters worldwide. MXene was used as a Ti precursor for anatase/rutile synthesis and as a co-catalyst in the photodegradation process. Manganese ferrite with ferrimagnetic properties was coupled with the TiO2/Ti3C2 composite to facilitate the magnetic separation after the purification process in an external magnetic field. Moreover, MnFe2O4 was used for PMS activation, producing •SO4- radicals with a strong oxidation ability and higher redox potential of 2.5–3.1 V (vs. NHE) than •OH radicals with a standard oxidation–reduction potential of 2.8 V. The effect of the manganese ferrite content in the composite structure (5 wt% and 20 wt%) on the physicochemical properties and photocatalytic activity of the magnetic photocatalyst was investigated. Furthermore, the most photocatalytic active composite of TiO2/MXene/5%MnFe2O4 was used for peroxymonosulphate-assisted photocatalytic degradation of ibuprofen and carbamazepine. The effect of peroxymonosulphate concentration (0.0625 mM, 0.125 mM, and 0.25 mM) and the synergistic effect of PMS activation on photocatalytic degradation was studied. Based on the obtained results, it was found that TiO2/MXene/5%MnFe2O4/PMS process is an efficient advanced treatment technology for the oxidation of emerging contaminants that are not susceptible to biodegradation. Carbamazepine and ibuprofen were completely degraded within 20 min and 10 min of the PMS-assisted photodegradation process under simulated solar light. The trapping experiments confirmed that •SO4- and •O2- are the main oxidising species involved in the CBZ degradation, while •SO4- and h+ in the IBP degradation. Furthermore, introducing interfering ions of Na+, Ca2+, Mg2+, Cl-, and SO42– in the model seawater did not affect the removal efficiency of both pharmaceuticals. In terms of reusability, the performance of the TiO2/MXene/5%MnFe2O4/PMS photocatalyst was stable after four subsequent cycles of carbamazepine and ibuprofen degradation., The research was financially supported by Polish National Science Centre (Grant No. NCN 2021/43/B/ST5/02983 ) and MCIN/ AEI /10.13039/501100011033, grant PID2020-116321RB-C21.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Insight into (electro)magnetic interactions within facet-engineered BaFe 12 O 19 /TiO 2 magnetic photocatalysts

  • Dudziak, Szymon
  • Gómez Polo, Cristina
  • Karczewski, Jakub
  • Nikiforow, Kostiantyn
  • Zielinska-Jurek, Anna
A series of facet-engineered TiO2/BaFe12O19 composites were synthesized through hydrothermal growth of both phases and subsequent deposition of the different, faceted TiO2 nanoparticles onto BaFe12O19 microplates. The well-defined geometry of the composite and uniaxial magnetic anisotropy of the ferrite allowed alternate interfaces between both phases and fixed the orientation between the TiO2 crystal structure and the remanent magnetic field within BaFe12O19. The morphology and crystal structure of the composites were confirmed by a combination of scanning electron microscopy (SEM) and X-ray diffraction (XRD) analyses together with the detailed study of BaFe12O19 electronic and magnetic properties. The photocatalytic activity and magnetic field effect were studied in the reaction of phenol degradation for TiO2/BaFe12O19 and composites of BaFe12O19 covered with a SiO2 protective layer and TiO2. The observed differences in phenol degradation are associated with electron transfer and the contribution of the magnetic field. All obtained magnetic composite materials can be easily separated in an external magnetic field, with efficiencies exceeding 95%, and recycled without significant loss of photocatalytic activity. The highest activity was observed for the composite of BaFe12O19 with TiO2 exposing {1 0 1} facets. However, to prevent electron transfer within the composite structure, this photocatalyst material was additionally coated with a protective SiO2 layer. Furthermore, TiO2 exposing {1 0 0} facets exhibited significant synergy with the BaFe12O19 magnetic field, leading to 2 times higher photocatalytic activity when ferrite was magnetized before the process. The photoluminescence emission study suggests that for this particular combination, the built-in magnetic field of the ferrite suppressed the recombination of the photogenerated charge carriers. Ultimately, possible effects of complex electro/magnetic interactions within the magnetic photocatalyst are shown and discussed for the first time, including the anisotropic properties of both phases., This work was financially supported by the Polish National Science Center with grant no. NCN 2018/30/E/ST5/00845 and grant no. NCN 2021/43/B/ST5/02983. Grant PID2020-116321RB-C21 funded by MCIN/AEI/10.13039/501100011033 is also acknowledged.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Magnetic Fe/Fe3C@C nanoadsorbents for efficient Cr (VI) removal

  • Cervera Gabalda, Laura María
  • Gómez Polo, Cristina
Magnetic carbon nanocomposites (α-Fe/Fe3C@C) synthesized employing fructose and Fe3O4 magnetite nanoparticles as the carbon and iron precursors, respectively, are analyzed and applied for the removal of Cr (VI). Initial citric acid-coated magnetite nanoparticles, obtained through the co-precipitation method, were mixed with fructose (weight ratio 1:2) and thermally treated at different annealing temperatures (Tann = 400, 600, 800, and 1000 ◦C). The thermal decomposition of the carbon matrix and the Fe3O4 reduction was followed by thermogravimetry (TGA) and Fourier transform infrared (FTIR) spectroscopy, X-ray diffraction, Raman spectroscopy, SQUID magnetometry, and N2 adsorption–desorption isotherms. A high annealing temperature (Tann = 800 ◦C) leads to optimum magnetic adsorbents (high magnetization enabling the magnetic separation of the adsorbent from the aqueous media and large specific surface area to enhance the pollutant adsorption process). Cr (VI) adsorption tests, performed under weak acid environments (pH = 6) and low pollutant concentrations (1 mg/L), confirm the Cr removal ability and reusability after consecutive adsorption cycles. Physical adsorption (pseudo-first-order kinetics model) and multilayer adsorption (Freundlich isotherm model) characterize the Cr (VI) absorption phenomena and support the enhanced adsorption capability of the synthesized nanostructures., The research was funded by MCIN/AEI/10.13039/501100011033, grant PID2020-116321RB-C21 and Navarra Government, Departamento de Universidad Innovación y Transformación Digital, project PC162-163 T3CE.
Academica-e. Repositorio Institucional de la Universidad Pública de Navarra
Publicación Artículo científico (JournalArticle)

Influence of the geometry on the performance of GMI in meander configuration

  • Beato López, Juan Jesús
  • Lete, N.
  • García-Arribas, A.
  • Gómez Polo, Cristina
The effect of geometry on Giant Magnetoimpedance effect (GMI) in a meander structure composed of three amorphous magnetic ribbons ((Co0.94 Fe0.06)72,5 Si12.5 B15; 20 mm length) connected electrically in series is analyzed. The impedance behavior under the meander configuration is compared with the sum configuration, namely, the sum of the impedance of each ribbon measured individually. The geometry effect in GMI response is examined by changing the distance, = 0.5, 1 and 2 cm, between ribbons in the meander. The highest GMI ratio is found for = 0.5 cm, with a gradual decrease for increasing distances. The lowest ratio corresponds to the sum configuration. The analysis of the results shows that this behavior of the GMI ratio, dominated by inductance, is determined by the overall negative contribution of the mutual inductance established between ribbons, and not by any intrinsic modification of the GMI effect in the meander structure., The authors want to acknowledge the funding from the Spanish Government (grants MAT2017-83631-C3-2-R, PID2020-116321RB-C21 and PID2020-115704RB-C32 all funded by Ministerio de Ciencia e Innovación MCIN/AEI/10.13039/501100011033). Besides, we want to acknowledge the funding of the Public University of Navarre (project PJUPNA2005) and the Basque Government (grants IT1245-19 and doctoral fellowship of N. L).