Pasar al contenido principal

DISEÑO, IMPLEMENTACION Y VALIDACION EN HARDWARE DE UNA RAIZ DE CONFIANZA RESISTENTE A ATAQUES, PARA SISTEMAS EMPOTRADOS SEGUROS

PID2020-116664RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE SEVILLA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Contribución de congreso (ConferenceOutput)

Design Flow to Evaluate the Performance of Ring Oscillator PUFs on FPGAs

  • Martínez-Rodríguez, Macarena Cristina
  • Camacho-Ruiz, Eros
  • Sánchez-Solano, Santiago
  • Brox, Piedad
This work presents a unified framework to design, implement and evaluate the performance of Ring Oscillator Physical Unclonable Functions (RO PUFs) on FPGAs. The design flow uses a Digital Signal Processing (DSP) tool integrated into the Matlab environment. The use of this tool eases the evaluation of the PUF performance. The DSP tool provides an environment to apply the challenges to the RO PUF, acquire the responses by using hardware (HW) co-simulation, and compute a set of metrics to quantify the stability, probability and entropy of the PIF response. Additionally, the robustness of the PUF response is proved in the generation of secret keys. The design flow was applied to evaluate the performance of RO PUFs implemented on 17 Basys 3 Artix-7 FPGA Boards., EU H2020, 952622, MCIN/AEI/10.13039/501100011033, PID2020-116664RB-I00, CSIC, LINKA20216, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

On-line evaluation and monitoring of security features of an RO-based PUF/TRNG for IoT devices

  • Rojas-Muñoz, Luis Felipe
  • Sánchez-Solano, Santiago
  • Martínez-Rodríguez, Macarena Cristina
  • Brox, Piedad
This article belongs to the Special Issue Validation Methods in IoT Systems: Security, Performance and Safety., The proliferation of devices for the Internet of Things (IoT) and their implication in many activities of our lives have led to a considerable increase in concern about the security of these devices, posing a double challenge for designers and developers of products. On the one hand, the design of new security primitives, suitable for resource-limited devices, can facilitate the inclusion of mechanisms and protocols to ensure the integrity and privacy of the data exchanged over the Internet. On the other hand, the development of techniques and tools to evaluate the quality of the proposed solutions as a step prior to their deployment, as well as to monitor their behavior once in operation against possible changes in operating conditions arising naturally or as a consequence of a stress situation forced by an attacker. To address these challenges, this paper first describes the design of a security primitive that plays an important role as a component of a hardware-based root of trust, as it can act as a source of entropy for True Random Number Generation (TRNG) or as a Physical Unclonable Function (PUF) to facilitate the generation of identifiers linked to the device on which it is implemented. The work also illustrates different software components that allow carrying out a self-assessment strategy to characterize and validate the performance of this primitive in its dual functionality, as well as to monitor possible changes in security levels that may occur during operation as a result of device aging and variations in power supply or operating temperature. The designed PUF/TRNG is provided as a configurable IP module, which takes advantage of the internal architecture of the Xilinx Series-7 and Zynq-7000 programmable devices and incorporates an AXI4-based standard interface to facilitate its interaction with soft- and hard-core processing systems. Several test systems that contain different instances of the IP have been implemented and subjected to an exhaustive set of on-line tests to obtain the metrics that determine its quality in terms of uniqueness, reliability, and entropy characteristics. The results obtained prove that the proposed module is a suitable candidate for various security applications. As an example, an implementation that uses less than 5% of the resources of a low-cost programmable device is capable of obfuscating and recovering 512-bit cryptographic keys with virtually zero error rate., This research was supported in part by the SPIRS Project with Grant Agreement No. 952622 under the EU H2020 research and innovation programme and the ARES Project PID2020-116664RB-100 funded by MCIN/AEI/10.13039/501100011033 and the EU NextGeneration EU/PRTR. M.C.M.R. holds a postdoc fellowship from the Andalusia Government with support from PO FSE of EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Timing-attack-resistant acceleration of NTRU round 3 encryption on resource-constrained embedded systems

  • Camacho-Ruiz, Eros
  • Martínez-Rodríguez, Macarena Cristina
  • Sánchez-Solano, Santiago
  • Brox, Piedad
This article belongs to the Special Issue Feature Papers in Hardware Security II., The advent of quantum computing with high processing capabilities will enable brute force attacks in short periods of time, threatening current secure communication channels. To mitigate this situation, post-quantum cryptography (PQC) algorithms have emerged. Among the algorithms evaluated by NIST in the third round of its PQC contest was the NTRU cryptosystem. The main drawback of this algorithm is the enormous amount of time required for the multiplication of polynomials in both the encryption and decryption processes. Therefore, the strategy of speeding up this algorithm using hardware/software co-design techniques where this operation is executed on specific hardware arises. Using these techniques, this work focuses on the acceleration of polynomial multiplication in the encryption process for resource-constrained devices. For this purpose, several hardware multiplications are analyzed following different strategies, taking into account the fact that there are no possible timing information leaks and that the available resources are optimized as much as possible. The designed multiplier is encapsulated as a fully reusable and parametrizable IP module with standard AXI4-Stream interconnection buses, which makes it easy to integrate into embedded systems implemented on programmable devices from different manufacturers. Depending on the resource constraints imposed, accelerations of up to 30–45 times with respect to the software-level multiplication runtime can be achieved using dedicated hardware, with a device occupancy of around 5%., This research was supported in part by the SPIRS Project with Grant Agreement No. 952622 under the EU H2020 research and innovation programme and the ARES Project PID2020-116664RB-100 funded by MCIN/AEI/10.13039/501100011033 and the NextGenerationEU/PRTR. M.C.M.-R. holds a Postdoc fellowship from the Andalusia Government with support from PO FSE of EU. E.C.-R. is supported by the FPU20/03008 predoc grant from the Spanish government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Design and evaluation of countermeasures against fault injection attacks and power side-channel leakage exploration for AES block cipher

  • Potestad-Ordoñez, Francisco E.
  • Tena-Sánchez, Erica
  • Acosta, Antonio J.
  • Jiménez Fernández, Carlos Jesús
  • Chaves, Ricardo
Differential Fault Analysis (DFA) and Power Analysis (PA) attacks, have become the main methods for exploiting the vulnerabilities of physical implementations of block ciphers, currently used in a multitude of applications, such as the Advanced Encryption Standard (AES). In order to minimize these types of vulnerabilities, several mechanisms have been proposed to detect fault attacks. However, these mechanisms can have a significant cost, not fully covering the implementations against fault attacks or not taking into account the leakage of the information exploitable by the power analysis attacks. In this paper, four different approaches are proposed with the aim of protecting the AES block cipher against DFA. The proposed solutions are based on Hamming code and parity bits as signature generators for the internal state of the AES cipher. These allow to detect DFA exploitable faults, from bit to byte level. The proposed solutions have been applied to a T-box based AES block cipher implemented on Field Programmable Gate Array (FPGA). Experimental results suggest a fault coverage of 98.5% and 99.99% with an area penalty of 9% and 36% respectively, for the parity bit signature generators and a fault coverage of 100% with an area penalty of 18% and 42% respectively when Hamming code signature generator is used. In addition, none of the proposed countermeasures impose a frequency degradation, in respect to the unprotected cipher. The proposed work goes further in the evaluation of the proposed DFA countermeasures by evaluating the impact of these structures in terms of power side-channel. The obtained results suggest that no extra information leakage is produced that can be exploited by PA. Overall, the proposed DFA countermeasures provide a high fault coverage protection with a low cost in terms of area and power consumption and no PA security degradation., This research was funded by Grant PID2020-116664RB-I00 funded by MCIN/AEI/10.13039/501100011033. Authors want to acknowledge to projects SCAROT 1380823-US/JUNTA/FEDER, UE, to Erasmus+, to COST Action CRYPTACUS, to FCT (Fundação para a Ciência e a Tecnologia, Portugal), to the ERDF (European Regional Development Fund, EU) through the projects FCT: UIDB/50021/2020 and LISBOA-01-0145-FEDER-031901 (PTDC/CCICOM/31901/2017, HiPErBio) and to Disruptive Sdn seCuRE communicaTIons for eurOpean defeNse, EDIDP-CSAMN-SDN-202-74-DISCRETION., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Efficient RO-PUF for generation of identifiers and keys in resource-constrained embedded systems

  • Martínez-Rodríguez, Macarena Cristina
  • Rojas-Muñoz, Luis Felipe
  • Camacho-Ruiz, Eros
  • Sánchez-Solano, Santiago
  • Brox, Piedad
This article belongs to the Special Issue Emerging Trends on Physical Security., The generation of unique identifiers extracted from the physical characteristics of the underlying hardware ensures the protection of electronic devices against counterfeiting and provides security to the data they store and process. This work describes the design of an efficient Physical Unclonable Function (PUF) based on the differences in the frequency of Ring Oscillators (ROs) with identical layout due to variations in the technological processes involved in the manufacture of the integrated circuit. The logic resources available in the Xilinx Series-7 programmable devices are exploited in the design to make it more compact and achieve an optimal bit-per-area rate. On the other hand, the design parameters can also be adjusted to provide a high bit-per-time rate for a particular target device. The PUF has been encapsulated as a configurable Intellectual Property (IP) module, providing it with an AXI4-Lite interface to ease its incorporation into embedded systems in combination with soft- or hard-core implementations of general-purpose processors. The capability of the proposed RO-PUF to generate implementation-dependent identifiers has been extensively tested, using a series of metrics to evaluate its reliability and robustness for different configuration options. Finally, in order to demonstrate its utility to improve system security, the identifiers provided by RO-PUFs implemented on different devices have been used in a Helper Data Algorithm (HDA) to obfuscate and retrieve a secret key., This research was supported in part by the SPIRS Project with Grant Agreement No. 952622 under the EU H2020 research and innovation programme and the ARES Project PID2020-116664RB-100 funded by MCIN/AEI/10.13039/501100011033 and the EU NextGenerationEU/PRTR. M.C.M.R. holds a Postdoc fellowship from the Andalusia Government with support from PO FSE of EU. E.C.R. is supported by the FPU20/03008 predoc grant from the Spanish Government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate-level design methodology for side-channel resistant logic styles using TFETs

  • Delgado-Lozano, Ignacio M.
  • Tena-Sánchez, Erica
  • Núñez, Juan
  • Acosta, Antonio J.
The design of secure circuits in emerging technologies is an appealing area that requires new efforts and attention as an effective solution to secure applications with power constraints. This letter deals with the optimized design of differential power analysis (DPA)-resilient hiding-based techniques, using tunnel field-effect transistors (TFETs). Specifically, proposed TFET implementations of dual-precharge-logic primitives optimizing their computation tree in three different ways are applied to the design of the PRIDE 4-bit substitution box, the most vulnerable block of the PRIDE lightweight cipher. The performance of simulation-based DPA attacks on the proposals has shown spectacular results in security gain (34 out of 48 attacks fail for optimized computation trees in TFET technology) and power reduction ( ×25 ), compared to their CMOS-based counterparts in 65 nm, which is a significant advance in the development of secure circuits with TFETs., This work was partially funded by the Spanish Government with support from FEDER under Projects TEC2017-87052-P and PID2020-116664RB-I00, by Programa Operativo FEDER 2014-2020 and Consejeria de Economia, Conocimiento, Empresas y Universidad de la Junta de Andalucia (Projects US1380876 and US-1380823) and by the SPIRS and SCARE Projects with Grant Agreement No. 952622 and No. 804476, respectively, under the European Union’s Horizon 2020 research and innovation programme, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Gate-level hardware countermeasure comparison against power analysis attacks

  • Tena-Sánchez, Erica
  • Potestad-Ordoñez, Francisco E.
  • Jiménez Fernández, Carlos Jesús
  • Acosta, Antonio J.
  • Chaves, Ricardo
This article belongs to the Special Issue Side Channel Attacks in Embedded Systems., The fast settlement of privacy and secure operations in the Internet of Things (IoT) is appealing in the selection of mechanisms to achieve a higher level of security at minimum cost and with reasonable performances. All these aspects have been widely considered by the scientific community, but more effort is needed to allow the crypto-designer the selection of the best style for a specific application. In recent years, dozens of proposals have been presented to design circuits resistant to power analysis attacks. In this paper, a deep review of the state of the art of gate-level countermeasures against power analysis attacks has been carried out, performing a comparison between hiding approaches (the power consumption is intended to be the same for all the data processed) and the ones considering a masking procedure (the data are masked and behave as random). The most relevant proposals in the literature, 35 for hiding and 6 for masking, have been analyzed, not only by using data provided by proposers, but also those included in other references for comparison. Advantages and drawbacks of the proposals are analyzed, showing quantified data for cost, performance (delay and power), and security when available. One of the main conclusions is that the RSL proposal is the best in masking, while TSPL, HDRL, SDMLp, 3sDDL, TDPL, and SABL are those with the best security performance figures. Nevertheless, a wise combination of hiding and masking as masked_SABL presents promising results., This work was funded by Grant PID2020-116664RB-I00 funded by MCIN/AEI/10.13039/501100011033. Authors want to acknowledge to projects Programa Operativo FEDER 2014-2020 and Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía under Project US-1380823, to the SPIRS (Secure Platform for ICT Systems Rooted at the Silicon Manfacturing Process) Project with Grant Agreement No. 952622 under the European Union’s Horizon 2020 research and innovation programme, to Erasmus+, to COST Action CRYPTACUS, to FCT (Fundação para a Ciência e a Tecnologia, Portugal), to the ERDF (European Regional Development Fund, EU) through the projects FCT: UIDB/50021/2020 and LISBOA-01-0145-FEDER-031901 (PTDC/CCI-COM/31901/2017, HiPErBio) and to Disruptive Sdn seCuRE communicaTIons for eurOpean defeNse, EDIDP-CSAMN-SDN-202-74-DISCRETION., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hardware countermeasures benchmarking against fault attacks

  • Potestad-Ordoñez, Francisco E.
  • Tena-Sánchez, Erica
  • Acosta, Antonio J.
  • Jiménez Fernández, Carlos Jesús
  • Chaves, Ricardo
This article belongs to the Special Issue Side Channel Attacks in Embedded Systems., The development of differential fault analysis (DFA) techniques and mechanisms to inject faults into cryptographic circuits brings with it the need to use protection mechanisms that guarantee the expected level of security. The AES cipher, as a standard, has been the target of numerous DFA techniques, where its security has been compromised through different formulations and types of fault injections. These attacks have shown vulnerabilities of different AES implementations and building blocks. Consequently, several solutions have been proposed that provide additional protection to cover the identified vulnerabilities. In this paper, an extensive analysis has been carried out covering the existing fault injection techniques, the types of faults, and the requirements needed to apply DFA. Additionally, an analysis of the countermeasures reported in the literature is also presented, considering the protection provided, the type of faults considered, and the coverage against fault attacks. The eight different types of fault that allow us to perform DFAs on the AES cipher have been differentiated, as well as the vulnerabilities of the cipher. On the other hand, two comparisons have been made considering frequency penalty vs. area and fault coverage vs. area and frequency overhead. A metric has been proposed to compare the fault coverage of all the proposed solutions. To conclude, a final analysis is presented discussing the key aspects when choosing a particular solution and the possible development of new countermeasures to provide further protection against DFA., This work was funded by Grant PID2020-116664RB-I00 funded by MCIN/AEI/10.13039/501100011033. Authors want to acknowledge to projects Programa Operativo FEDER 2014-2020 and Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía under Project US-1380823, to the SPIRS (Secure Platform for ICT Systems Rooted at the Silicon Manfacturing Process) Project with Grant Agreement No. 952622 under the European Union’s Horizon 2020 research and innovation programme, to Erasmus+, to COST Action CRYPTACUS, to FCT (Fundação para a Ciência e a Tecnologia, Portugal), to the ERDF (European Regional Development Fund, EU) through the projects FCT: UIDB/50021/2020 and LISBOA-01-0145-FEDER-031901 (PTDC/CCI-COM/31901/2017, HiPErBio) and to Disruptive Sdn seCuRE communicaTIons for eurOpean defeNse, EDIDP-CSAMN-SDN-202-74-DISCRETION., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multi-unit serial polynomial multiplier to accelerate NTRU-based cryptographic schemes in IoT embedded systems

  • Sánchez-Solano, Santiago
  • Camacho-Ruiz, Eros
  • Martínez-Rodríguez, Macarena Cristina
  • Brox, Piedad
This article belongs to the Special Issue Advances in Cybersecurity for the Internet of Things., Concern for the security of embedded systems that implement IoT devices has become a crucial issue, as these devices today support an increasing number of applications and services that store and exchange information whose integrity, privacy, and authenticity must be adequately guaranteed. Modern lattice-based cryptographic schemes have proven to be a good alternative, both to face the security threats that arise as a consequence of the development of quantum computing and to allow efficient implementations of cryptographic primitives in resource-limited embedded systems, such as those used in consumer and industrial applications of the IoT. This article describes the hardware implementation of parameterized multi-unit serial polynomial multipliers to speed up time-consuming operations in NTRU-based cryptographic schemes. The flexibility in selecting the design parameters and the interconnection protocol with a general-purpose processor allow them to be applied both to the standardized variants of NTRU and to the new proposals that are being considered in the post-quantum contest currently held by the National Institute of Standards and Technology, as well as to obtain an adequate cost/performance/security-level trade-off for a target application. The designs are provided as AXI4 bus-compliant intellectual property modules that can be easily incorporated into embedded systems developed with the Vivado design tools. The work provides an extensive set of implementation and characterization results in devices of the Xilinx Zynq-7000 and Zynq UltraScale+ families for the different sets of parameters defined in the NTRUEncrypt standard. It also includes details of their plug and play inclusion as hardware accelerators in the C implementation of this public-key encryption scheme codified in the LibNTRU library, showing that acceleration factors of up to 3.1 are achieved when compared to pure software implementations running on the processing systems included in the programmable devices., This research was supported in part by the SPIRS Project with Grant Agreement No. 952622 under the EU H2020 research and innovation programme and the ARES Project PID2020-116664RB-100 funded by MCIN/AEI/10.13039/501100011033 and the NextGenerationEU/PRTR. M.C.M.R. holds a Postdoc fellowship from the Andalusia Government with support from PO FSE of EU. E.C.R. is supported by the FPU20/03008 predoc grant from the Spanish government., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

True random number generation capability of a ring oscillator PUF for reconfigurable devices

  • Rojas-Muñoz, Luis Felipe
  • Sánchez-Solano, Santiago
  • Martínez-Rodríguez, Macarena Cristina
  • Brox, Piedad
This article belongs to the Special Issue Circuits and Systems of Security Applications., This paper presents the validation of a novel approach for a true-random number generator (TRNG) based on a ring oscillator–physical unclonable function (RO-PUF) for FPGA devices. The proposal takes advantage of the different noise sources that affect the electronic implementation of the RO-PUF to extract the entropy required to guarantee its function as a TRNG, without anything more than minimal changes to the original design. The new RO-PUF/TRNG architecture has been incorporated within a hybrid HW/SW embedded system designed for devices from the Xilinx Zynq-7000 family. The degree of randomness of the generated bit streams was assessed using the NIST 800-22 statistical test suite, while the validation of the RO-PUF proposal as an entropy source was carried out by fulfilling the NIST 800-90b recommendation. The features of the hybrid system were exploited to carry out the evaluation and validation processes proposed by the NIST publications, online and on the same platform. To establish the optimal configuration to generate bit streams with the appropriate entropy level, a statistical study of the degree of randomness was performed for multiple TRNG approaches derived from the different implementation modes and configuration options available on the original RO-PUF design. The results show that the RO-PUF/TRNG design is suitable for secure cryptographic applications, doubling its functionality without compromising the resource–efficiency trade-off already achieved in the design., This research was supported in part by the SPIRS Project with Grant Agreement No. 952622 under the EU H2020 research and innovation programme and the ARES Project PID2020-116664RB-100 funded by MCIN/AEI/10.13039/501100011033 and the EU NextGeneration EU/PRTR. M.C.M.R. holds a postdoc fellowship from the Andalusia Government with support from PO FSE of EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Protecting FPGA-Based Cryptohardware Implementations from Fault Attacks Using ADCs

  • Potestad-Ordoñez, Francisco E.
  • Casado-Galán, Alejandro
  • Tena-Sánchez, Erica
The majority of data exchanged between connected devices are confidential and must be protected against unauthorized access. To ensure data protection, so-called cryptographic algorithms are used. These algorithms have proven to be mathematically secure against brute force due to the key length, but their physical implementations are vulnerable against physical attacks. The physical implementation of these algorithms can result in the disclosure of information that can be used to access confidential data. Some of the most powerful hardware attacks presented in the literature are called fault injection attacks. These attacks involve introducing a malfunction into the normal operation of the device and then analyzing the data obtained by comparing them with the expected behavior. Some of the most common methods for injecting faults are the variation of the supply voltage and temperature or the injection of electromagnetic pulses. In this paper, a hardware design methodology using analog-to-digital converters (ADCs) is presented to detect attacks on cryptocircuits and prevent information leakage during fault injection attacks. To assess the effectiveness of the proposed design approach, FPGA-based ADC modules were designed that detect changes in temperature and supply voltage. Two setups were implemented to test the scheme against voltage and temperature variations and injections of electromagnetic pulses. The results obtained demonstrate that, in 100% of the cases, when the correct operating voltage and temperature range were established, the detectors could activate an alarm signal when the cryptographic module was attacked, thus avoiding confidential information leakage and protecting data from being exploited., The authors want to express gratitude for the SPIRS (Secure Platform for ICT Systems Rooted at the Silicon Manufacturing Process) Project, Grant Agreement No. 952622, under the European Union’s Horizon 2020 research and innovation programme; Programa Operativo FEDER 2014-2020 and Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía under project US-1380823; and project grant PID2020-116664RB-I00 funded by MCIN/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hardware-Efficient Configurable Ring-Oscillator-Based Physical Unclonable Function/True Random Number Generator Module for Secure Key Management

  • Sánchez-Solano, Santiago
  • Rojas-Muñoz, Luis Felipe
  • Martínez-Rodríguez, Macarena Cristina
  • Brox, Piedad
The use of physical unclonable functions (PUFs) linked to the manufacturing process of the electronic devices supporting applications that exchange critical data over the Internet has made these elements essential to guarantee the authenticity of said devices, as well as the confidentiality and integrity of the information they process or transmit. This paper describes the development of a configurable PUF/TRNG module based on ring oscillators (ROs) that takes full advantage of the structure of modern programmable devices offered by Xilinx 7 Series families. The proposed architecture improves the hardware efficiency with two main objectives. On the one hand, we perform an exhaustive statistical characterization of the results derived from the exploitation of RO configurability. On the other hand, we undertake the development of a new version of the module that requires a smaller amount of resources while considerably increasing the number of output bits compared to other proposals previously reported in the literature. The design as a highly parameterized intellectual property (IP) module connectable through a standard interface to a soft- or hard-core general-purpose processor greatly facilitates its integration into embedded solutions while accelerating the validation and characterization of this element on the same electronic device that implements it. The studies carried out reveal adequate values of reliability, uniqueness, and unpredictability when the module acts as a PUF, as well as acceptable levels of randomness and entropy when it acts as a true random number generator (TRNG). They also illustrate the ability to obfuscate and recover identifiers or cryptographic keys of up to 4096 bits using an implementation of the PUF/TRNG module that requires only an array of 4×4 configurable logic blocks (CLBs) to accommodate the RO bank., This research was supported in part by the SPIRS Project with Grant Agreement No. 952622 under the EU H2020 research and innovation programme and the ARES Project PID2020-116664RB-100 funded by MCIN/AEI/10.13039/501100011033 and the EU NextGeneration EU/PRTR., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Cost Full Correlated-Power-Noise Generator to Counteract Side-Channel Attacks

  • Tena-Sánchez, Erica
  • Potestad-Ordoñez, Francisco E.
  • Zúñiga-González, Virginia
  • Acosta, Antonio J.
Considerable attention has been given to addressing side-channel attacks to improve the security of cryptographic hardware implementations. These attacks encourage the exploration of various countermeasures across different levels of abstraction, through masking and hiding techniques, mainly. In this paper, we introduce a novel hiding countermeasure designed to mitigate Correlation Power Analysis (CPA) attacks without significant overhead. The new countermeasure interferes with the processed data, minimizing the power correlation with the secret key. The proposed method involves using a Correlated-Power-Noise Generator (CPNG). This study is supported by experimental results using CPA attacks on a SAKURA-G board with a SPARTAN-6 Xilinx FPGA. An Advanced Encryption Standard (AES) cipher with 128/256-bit key size is employed for this purpose. The proposed secure design of AES has an area overhead of 29.04% compared to unprotected AES. After conducting a CPA attack, the acquisition of information about the private key has been reduced drastically by 44.5%., This research received no external funding., Authors want to thank projects Grant PID2020-116664RB-I00 funded by MCIN/AEI/ 10.13039/501100011033, project of “Programa Operativo FEDER 2014-2020 and Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía under Project US-1380823”, the SPIRS (Secure Platform for ICT Systems Rooted at the Silicon Manfacturing Process) Project with Grant Agreement No. 952622 under the European Union’s Horizon 2020 research and innovation programme, and by the Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair program, funded by European Union–Next Generation EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TinyJAMBU Hardware Implementation for Low Power

  • Fernández-Garcia, Carlos
  • Mora-Gutiérrez, J. M.
  • Jiménez Fernández, Carlos Jesús
In this paper, we present hardware implementations of the lightweight TinyJAMBU cipher with reduced power consumption using a mechanism based on shift register parallelization. The power consumption in digital circuits depends linearly on the switching activity of the logic gates. The parallelization technique reduces the number of switches per clock cycle of the shift registers, which can significantly reduce power consumption. This technique has been applied to the TinyJAMBU cipher, a finalist in the NIST lightweight cryptography standardization process with the lowest resource and power consumption. The implementations we present use the logical parallelization technique in the cipher's NLFSR, which is the basic block of TinyJAMBU, and in the key register. Measurements with data from various post-place and route simulations, performed for the Xilinx 7-Series family of FPGAs, are presented to demonstrate the effectiveness of the proposed technique in reducing power consumption, achieving a reduction of more than 30% in dynamic power consumption compared to the standard implementation, with almost no increase in resource consumption. Therefore, the ciphers hardware implementations proposed in this paper are highly suitable for use as hardware peripherals in applications with severe constraints on available resources and power, such as low-power microcontrollers that are widely used in the IoT field., This work has been funded by Project SPIRS (Secure Platform for ICT Systems Rooted at the Silicon Manufacturing Process) Project with Grant Agreement No. 952622 under the European Union’s Horizon 2020 research and innovation programme; and the authors want to thank project ARES, Grant PID2020-116664RB-I00 funded by MCIN/AEI/10.13039/501100011033; to the Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair program, funded by European Union – Next Generation EU; and to the VII Own Plan for Research and Transfer of The University of Seville (VII-PPITUS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Detailed Assessment of Hardware Implementations, Attacks and Countermeasures for the Ascon Authenticated Cipher

  • Martín-González, Miguel
  • Tena-Sánchez, Erica
  • Potestad-Ordoñez, Francisco E.
  • Acosta, Antonio J.
The design and implementation of lightweight-oriented ciphers on hardware has turned into an urgent matter with the expansive field of Internet of Things (IoT) and the ever increasing presence of small electronic devices that require fast and secure communication in our modern world. In 2023, the Ascon cipher was selected as the new standard authenticated encryption with associated data (AEAD) algorithm for lightweight environments by the National Institute of Standards and Technology (NIST). This paper provides a full comparison and joint evaluation of the hardware implementations, attacks and countermeasures that have been proposed for Ascon since it was published, aiming to shed light on some open development paths in addition to enable the hardware designer to make better informed decisions. All in all, Ascon implementations tend to achieve great performance while staying lightweight, but unprotected implementations are vulnerable to hardware attacks, and some attacks can even dodge counter measures. The very promising Ascon cipher will surely thrive in the field of lightweight cryptography, but further work into the design of secure implementations is still needed, being this paper a great starting point for researchers and designers alike., This work has been funded by the project Grant PID2020-116664RB-I00 funded by MCIN/AEI/10.13039/501100011033. Authors want to thank the SPIRS (Secure Platform for ICT Systems Rooted at the Silicon Manufacturing Process) Project with Grant Agreement No. 952622 under the European Union's Horizon 2020 Research and Innovation Programme and the Ministerio de Asuntos Económicos y Transformación Digital through TSI-069100-2023-1 PERTE-Chip Chair Project, with NextGenerationEU funds., Peer reviewed