Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 10
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Low-Cost Full Correlated-Power-Noise Generator to Counteract Side-Channel Attacks

  • Tena-Sánchez, Erica
  • Potestad-Ordoñez, Francisco E.
  • Zúñiga-González, Virginia
  • Acosta, Antonio J.
Considerable attention has been given to addressing side-channel attacks to improve the security of cryptographic hardware implementations. These attacks encourage the exploration of various countermeasures across different levels of abstraction, through masking and hiding techniques, mainly. In this paper, we introduce a novel hiding countermeasure designed to mitigate Correlation Power Analysis (CPA) attacks without significant overhead. The new countermeasure interferes with the processed data, minimizing the power correlation with the secret key. The proposed method involves using a Correlated-Power-Noise Generator (CPNG). This study is supported by experimental results using CPA attacks on a SAKURA-G board with a SPARTAN-6 Xilinx FPGA. An Advanced Encryption Standard (AES) cipher with 128/256-bit key size is employed for this purpose. The proposed secure design of AES has an area overhead of 29.04% compared to unprotected AES. After conducting a CPA attack, the acquisition of information about the private key has been reduced drastically by 44.5%., This research received no external funding., Authors want to thank projects Grant PID2020-116664RB-I00 funded by MCIN/AEI/ 10.13039/501100011033, project of “Programa Operativo FEDER 2014-2020 and Consejería de Economía, Conocimiento, Empresas y Universidad de la Junta de Andalucía under Project US-1380823”, the SPIRS (Secure Platform for ICT Systems Rooted at the Silicon Manfacturing Process) Project with Grant Agreement No. 952622 under the European Union’s Horizon 2020 research and innovation programme, and by the Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair program, funded by European Union–Next Generation EU., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reliable and efficient integration of AI into camera traps for smart wildlife monitoring based on continual learning

  • Velasco-Montero, Delia
  • Fernández-Berni, J.
  • Carmona-Galán, R.
  • Sanglas, Ariadna
  • Palomares, Francisco
In this paper, we comprehensively report on an efficient approach for the integration of artificial intelligence (AI) processing pipelines in camera traps for smart on-site wildlife monitoring. Our work covers hardware, software, and algorithmics. We have built two prototypes of smart camera trap on a maximum bill of materials of 100$. We have also built two datasets, made publicly available, comprising over 17 k images, many of them notably challenging even for humans. Leveraging our broad expertise on embedded systems, specialized software libraries and toolchains, and AI techniques such as transfer learning, explainable AI, and, most importantly, continual learning, we achieve more reliable inference on-site - specifically 10 % higher F1-score - than MegaDetector run off-site on a desktop computer. The paper includes many practical details on system realization and on-site training in addition to a vast set of lab and experimental results., This work was supported by project SEMIoTICS (PID2021-128009OB-C31), funded by MCIN/AEI/10.13039/501100011033 and EU “ERDF: A way of making Europe”; by project ULTIMATE (TED2021-131835B-I00), funded by MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; by project SUMHAL (LIFEWATCH-2019-09-CSIC-4, POPE 2014-2020), funded by Ministry of Science and Innovation of Spain through European Regional Development Fund; by the Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair Program, funded by European Union – Next Generation EU; and by project SIMMRE, “Plan Complementario de I+D+i en el área de Biodiversidad (PCBIO)” funded by the European Union within the framework of the Recovery, Transformation and Resilience Plan - NextGenerationEU, by the Spanish Ministry of Science, Innovation and Universities and by the Regional Government of Andalucia., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

AISAD, Artificial Intelligence-assisted Synthesis toolbox for Analog/Digital interfaces

  • Liñán-Cembrano, Gustavo
  • Rosa, José M. de la
Version: v1.0. -- Copyright (c) 2025 IMSE-CNM (CSIC-Univ. of Seville) AI-Supported Microelectronic Design Group. Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. The software is provided "as is", without warranty of any kind, express or implied, including but not limited to the warranties of merchantability, fitness for a particular purpose and noninfringement. in no event shall the authors or copyright holders be liable for any claim, damages or other liability, whether in an action of contract, tort or otherwise, arising from, out of or in connection with the software or the use or other dealings in the software., AISAD (Artificial Intelligence-assisted Synthesis toolbox for Analog/Digital interfaces) is a MATLAB-based software toolkit enhanced with artificial neural networks for the design of Sigma-Delta Modulators (SDMs). It supports designers in finding suitable architectures and parameters that meet given performance specifications. AISAD integrates a Graphical User Interface (GUI) and allows inverse regression and classification-based synthesis, enabling both novice and expert users to perform design space exploration and validation through simulation. It includes support for behavioral validation via SIMSIDES. Noteworthy features include automated model training pipelines, inverse prediction (from specs to design parameters), and behavioral validation of results., This work was supported in part by Grants PID2022-138078OB-I00, and PDC2023-145808-I00, funded by MCIN/AEI/10.13039/501100011033,Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair program, by the European Union NextGenerationEU/PRTR, by ERDF A way of making Europe, and by CSIC AI-Hub initiative (CSIC Interdisciplinary Thematic Platform on Artificial Intelligence)., File List: - `PROCESSING/`: scripts for dataset preparation and visualization. - `CLASSIFIERS/`: Python modules for model training and evaluation. - `REGRESSION-ANN/`: TensorFlow/Keras scripts for regression. - `VALIDATION/`: modules for behavioral validation and cross-validation. - `GUI/`: MATLAB files for the graphical interface. - `MODELS/`: Simulink models used in simulations. - `SPECS_PREDICTOR_ANN/`: tools for inverse prediction. - `requirements.txt`: list of required Python packages., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

TinyJAMBU Hardware Implementation for Low Power

  • Fernández-Garcia, Carlos
  • Mora-Gutiérrez, J. M.
  • Jiménez Fernández, Carlos Jesús
In this paper, we present hardware implementations of the lightweight TinyJAMBU cipher with reduced power consumption using a mechanism based on shift register parallelization. The power consumption in digital circuits depends linearly on the switching activity of the logic gates. The parallelization technique reduces the number of switches per clock cycle of the shift registers, which can significantly reduce power consumption. This technique has been applied to the TinyJAMBU cipher, a finalist in the NIST lightweight cryptography standardization process with the lowest resource and power consumption. The implementations we present use the logical parallelization technique in the cipher's NLFSR, which is the basic block of TinyJAMBU, and in the key register. Measurements with data from various post-place and route simulations, performed for the Xilinx 7-Series family of FPGAs, are presented to demonstrate the effectiveness of the proposed technique in reducing power consumption, achieving a reduction of more than 30% in dynamic power consumption compared to the standard implementation, with almost no increase in resource consumption. Therefore, the ciphers hardware implementations proposed in this paper are highly suitable for use as hardware peripherals in applications with severe constraints on available resources and power, such as low-power microcontrollers that are widely used in the IoT field., This work has been funded by Project SPIRS (Secure Platform for ICT Systems Rooted at the Silicon Manufacturing Process) Project with Grant Agreement No. 952622 under the European Union’s Horizon 2020 research and innovation programme; and the authors want to thank project ARES, Grant PID2020-116664RB-I00 funded by MCIN/AEI/10.13039/501100011033; to the Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair program, funded by European Union – Next Generation EU; and to the VII Own Plan for Research and Transfer of The University of Seville (VII-PPITUS)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

BAM-SLDK: biologically inspired attention mechanism with spiking learnable delayed kernel synapses

  • Chacón-Falcón, Mario
  • Patiño-Saucedo, Alberto
  • Camuñas-Mesa, Luis A.
  • Serrano-Gotarredona, Teresa
  • Linares-Barranco, Bernabé
Spiking neural networks are emerging as an alternative neural network model due to their biological plausibility, energy efficiency, and built-in ability to learn from temporal dynamics. However, in order to effectively process data with rich spatial and temporal dependencies, the usual static projections (feedforward and recurrent) among layers of spiking neurons fail to represent all the information needed. Inspired by how synaptic delays affect the learning process in biological neurons, in this paper, we propose a biologically inspired attention mechanism based on spiking convolutions with learnable delayed kernel synapses. The proposed model increases temporal learning ability, attending simultaneously to spatial and temporal dynamics with few parameters required. More precisely, our main technical contributions are: (1) we add kernels to the temporal dimension to enlarge the receptive field of the convolution; (2) we time kernels activations to mimic multiple delayed times; and (3) we introduce three different pruning techniques to optimize the number of delays and parameters used. Experiments show that our method surpasses conventional spiking convolutional modules and achieves state-of-the-art results. When pruning, we show that, for some datasets or pruning techniques, removing up to 80% of the initially trained delays results in minimal performance loss, effectively reducing memory consumption and parameters required. To the best of our knowledge, this is the first time that learnable delayed synapses have been included in spiking convolutional layers for neuromorphic datasets classification, unlocking a new biologically inspired attention mechanism and achieving superior performance on high temporal demanding tasks., This work was funded by the Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair program, funded by European Union – Next Generation EU, and partly funded by Grant SAMURAI PDC2023-145841-C31 from the Spanish Ministry of Science, Innovation, and Universities, and by regional Grant BIOVEO PROYEXCEL_00060. M C F was supported by CSIC JAE-Intro-ICU fellowship AIHUB-15., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Prediction-Based Spectrum Sensing Framework for Cognitive Radio

  • Rojas, Andrés
  • Follet, Gawen
  • Jovanovic-Dolecek, G.
  • Rosa, José M. de la
  • Liñán-Cembrano, Gustavo
This paper presents a hardware-software deep learning architecture for prediction-based spectrum sensing in Cognitive Radio (CR) applications. A convolutional neural network-based predictor for spectrum occupancy was trained using the band power from I/Q samples acquired by a softwaredefined radio (SDR). Additionally, a second neural engine was trained for radio frequency (RF) frame detection based on spectrograms. We implemented a transfer-learning solution using a You-Only-LookOnce version 8 nano model with a synthetic dataset comprising thousands of wireless signals, including Wi-Fi, Bluetooth, and collision frames. Once trained, the two neural networks were transferred to a Raspberry Pi 5 - an affordable single-board computer - connected to two (one for Rx, one for Tx) ADALM-PLUTO SDR systems for benchmarking using over-the-air signals in the 2.4 GHz band. Together with our methodology and experimental results, the paper also presents an overview of current spectrum prediction proposals and RF frame detectors. Remarkably, to the best of our knowledge, this proposed framework is the first approach towards an Internet of Things-suitable implementation of prediction-based spectrum sensing for CR applications., This publication has been funded by grant USECHIP (TSI-069100-2023-001), project funded by the Secretary of State for Telecommunications and Digital Infrastructure, Ministry for the Digital Transformation and Civil Service and by the European Union Next Generation EU/PRTR. This work was also supported in part by Secretaría de Ciencia, Humanidades, Tecnología e Innovación (Secihti) and by Grants PID2022-138078OB-I00, and PDC2023-145808-I00, funded by MICIU/AEI/10.13039/501100011033 and by the European Union, ERDF A way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Modeling the Photovoltaic Diode Region for High Dynamic Range Image Sensor Design

  • Fernández-Peramo, Pablo
  • Leñero-Bardallo, J. A.
  • Rodríguez-Vázquez, Ángel
This work presents an analytical model for the dependence of the open-circuit voltage of CMOS diodes operating in the photovoltaic (PV) regime versus illuminance and temperature. The model is targeted for image sensor design and provides insights into key behavioral features relevant to high dynamic range (HDR) image acquisition, including the steady-state response, sensitivity, bandwidth, noise, and signal-to-noise ratio (SNR) under varying illuminance and temperature conditions. The article also includes experimental data to confirm the adequacy of the proposed model in predicting the behavior of practical photodiodes. These findings highlight the suitability of a PV diode as the photoreceptor stage for HDR imaging applications, offering improved compactness and noise performance over conventional logarithmic photoreceptors while operating without static power consumption as a result of its self-biased nature., This work was supported by the Project ELIXIR (PID2023-147244OB-I00) funded by MICIU/AEI and by FEDER, and the Project USECHIP (TSI-069100-2023-001) funded by the Secretary of State for Telecommunications and Digital Infrastructure, Ministry for Digital Transformation and Civil Service and by the European Union–NextGenerationEU/PRTR. The review of this article was arranged by Editor K. Stefanov., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Otros (Other)

Optimized Design of 𝚺𝚫 Modulators Using Deep-Learningand Simulated Annealing

  • Liñán-Cembrano, Gustavo
  • Rosa, José M. de la
The data that support the findings of this study will be openly available at https://git.csic.es/27317787C/aisad. Once the paper will be accepted, the following data will be provided a doi and repository name will be provided., This letter presents a MATLAB toolbox for the automated high-level design and optimization of analogue-to-digital converters (ADCs), using sigma-delta modulators ((Formula presented.)) as case studies. The tool combines machine learning (ML) techniques and behavioural simulation to obtain the optimum set of building-block (amplifiers, comparators, etc.) requirements for a given set of specifications, namely resolution, signal bandwidth and power consumption. Two machine learning blocksgradient boosting classifiers and regression-type artificial neural networks—are trained, using Python libraries, to identify the best ADC architecture as well as to infer a set of design parameters which yields ADC specifications. The result from the ML blocks can be cross-checked in behavioural simulations in MATLAB and also optimized with respect to signal-to-noise ratio (SNR), power consumption, or figure-of-merit (FoM) using an embedded simulated annealing (SA) process. The toolbox is controlled through a graphical user interface (GUI) for MATLAB which guides the designer through the whole process, from specifications to obtaining an implementation that meets the required specifications., This work was supported in part by Grants PID2022-138078OB-I00, and PDC2023-145808-I00, funded by MCIN/AEI/10.13039/501100011033, and by Ministry for Digital Transformation and Public Function through grant USECHIP (TSI-069100-2023-001) of PERTE Chip Chair program, by the European Union NextGenerationEU/PRTR, by ERDF a way of making Europe., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An accessible and open-source workflow for fabrication of custom PDMS culture chambers using 3D printing

  • Algarín Pérez, Antonio
  • Cabrera, Paula Lian
  • Scagliusi, Santiago F.
  • Daza, Paula
  • Yúfera, Alberto
  • Martín Fernández, Daniel
Custom cell culture platforms are widely used in tissue engineering applications. However, their fabrication often requires specialized microfabrication equipment and advanced technical skills, limiting accessibility. This work presents an accessible and open-source workflow for the fabrication of custom PDMS culture chambers. This workflow focuses on the use of parametric CAD designs, 3D-printed molds, resin casting and plasma-free bonding. The proposed approach allows users to generate customized molds adapted to the experimental requirements using a graphical interface without extensive CAD knowledge. The molds can be manufactured using commonly available 3D printers or outsourced at relatively low cost. Device assembly is performed using uncured PDMS as a bonding agent, eliminating the need for plasma bonding equipment. The resulting culture chambers were validated through watertightness testing and biological evaluation using N2a cell cultures. Cell viability after 72 h of culture was comparable to that observed in standard culture plates. By reducing requirements for specialized equipment and technical expertise, this workflow facilitates the rapid, low-cost and reproducible fabrication of customized PDMS culture platforms for tissue engineering and related biomedical applications., This publication is part of the project USECHIP (TSI-069100-2023-001), funded by the Secretary of State for Telecommunications and Digital Infrastructure, Ministry for Digital Transformation and Civil Service and by the European Union–NextGenerationEU/PRTR. Additionally, by the project PID2021-1225290B-100, funded by MICIU/ AEI/ 10.13039/501100011033 and by ERDF/EU. The authors appreciate the help of Dr. Luis Orta, Dr. Nuria Pastor and the technicians at IMSE, especially Antonio Maestre., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

A Systematic Three-Port Matching Design Methodology for 6-GHz CMOS Active Baluns

  • Méndez-Romero, Roberto
  • Peralías, E.
  • Fiorelli, Rafaella
Early Access, Designing CMOS active baluns at microwave frequencies is challenging due to strong parasitic effects, heterogeneous signal paths, and the need to simultaneously match multiple circuit ports. This work presents a systematic design methodology for microwave CMOS active baluns based on the combined use of gm/ID transistor sizing, a three-port Simultaneous Conjugate Matching procedure and an Extended Modified Nodal Analysis evaluation framework. By modeling the active balun as a three-port network, the proposed approach enables the design of the input and differential output matching networks while maintaining consistency with technology-constrained passive components. The methodology supports exploration of the design space and reveals the trade-offs among gain, noise figure and power consumption through performance projections and Pareto numerical analysis. The EMNA-based predictions are validated against full electrical simulations over 636 selected operating points, showing close agreement across the feasible design space. A 65-nm CMOS prototype designed for 6-GHz operation from a 1.2-V supply further confirms the proposed flow experimentally., This work has been funded by grant USECHIP (TSI-069100-2023- 001), project funded by the Secretary of State for Telecommunications and Digital Infrastructure, Ministry for Digital Transformation and Civil Service and by the European Union–NextGenerationEU/PRTR, and in part by EU H2020 Grant SpinAge under Grant 899559. The work of Roberto Mendez- ´ Romero was supported by Formacion de Profesorado Universitario (FPU) ´ Scholarship from Spanish Ministry of Science and Universities., Peer reviewed