Pasar al contenido principal

NUEVOS SCAFFOLDS PIEZOELECTRICOS DE COMPUESTOS NANOESTRUCTURADOS PARA LA REGENERACION OSEA MEDIANTE FABRICACION ADITIVA

PID2020-117648RB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE LAS PALMAS DE GRAN CANARIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 3
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

An overview of polymeric composite scaffolds with piezoelectric properties for improved bone regeneration

  • Donate, Ricardo
  • Paz, Rubén
  • Moriche, Rocío
  • Sayagués, María Jesús
  • Alemán-Domínguez, María Elena
  • Monzón, Mario
Despite the dramatic change that Tissue Engineering or stem cell therapies have brought to current therapeutic strategies, there is a lack of functionalities in the available biomaterials for manufacturing scaffolds to treat several highly prevalent osseous diseases (osteochondral defects, osteoporosis, etc.). One promising approach to fill this gap involves the development of innovative piezoelectric scaffolds for improved bone regeneration. Scaffolds with the appropriate piezoelectricity can positively influence the proliferation and differentiation of mesenchymal stem cells to regenerate bone tissue, since surface electrical charges play a key role in the mechanotransduction process. In this work, polymeric-based composite scaffolds with piezoelectric properties intended for bone tissue engineering are reviewed. Special attention is paid to biocompatible, piezoelectric polymers that show suitable properties to be processed by additive manufacturing techniques. Previous works on composite scaffolds based of these polymeric matrices and containing piezoceramic additives are summarized. The use of piezoelectric nanostructured composite formulations containing lead-free ceramic oxide nanoparticles with perovskite structure is highlighted. Also, different commonly applied mechanical stimuli to activate the piezoelectric effect of the developed materials are presented. Finally, other applications of such scaffolds are mentioned, including their capabilities for real-time monitoring., This contribution is part of the PIZAM project (PID2020-117648RB-I00/AEI/10.13039/501100011033)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Fine-grained BCZT piezoelectric ceramics by combining high-energy mechanochemical synthesis and hot-press sintering

  • Sayagués, M. J.
  • Otero, A.
  • Santiago-Andrades, L.
  • Poyato, R.
  • Monzón, M.
  • Paz, R.
  • Gotor, F.J.
  • Moriche, R.
Different stoichiometries of lead-free BaZr0.2Ti0.8O3–Ba0.7Ca0.3TiO3 (BCZT) prepared by mechanosynthesis and sintered by either conventional sintering (CS) or hot pressing (HP) techniques were studied to establish the dependence of piezoelectric and dielectric properties on sintering parameters and microstructure. All synthesized stoichiometries showed a pseudocubic perovskite phase with homogeneously distributed A- and B-cations in the structure. The BCZT retained the pseudocubic symmetry after sintering and an average grain size <1.8 µm was obtained in all cases. HP sintering hindered the secondary phase segregation observed in the CS ceramics and increased the relative density. Piezoelectric coefficients (d33) ranging from 5.1 to 21 pC/N and from 10.0 to 88.0 pC/N were obtained for CS and HP ceramics, respectively, despite the pseudocubic symmetry and the fine grain size. The higher d33 values for the HP ceramics are a consequence of the higher density, better chemical homogeneity and lower sintering temperature and time required for the mechanosynthesized BCZT powders with high sintering activity., The authors acknowledge the grant TED2021–131458A-I00 funded by MICIU/AEI/ 10.13039/501100011033 and by the “European Union NextGenerationEU/PRTR”; and the grant PID2020–117648RB-I00 funded by MICIU/AEI/10.13039/501100011033., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Processability and properties of cubic-BaTiO3/poly(vinylidene fluoride) composites for additive manufacturing: From powder compounding to 3D-printed parts

  • Moriche, Rocío
  • Donate, Ricardo
  • Otero, Andrea
  • Santiago-Andrades, Lucía
  • Monzón, Elena
  • Sayagués, María Jesús
  • Monzón, Mario
  • Paz, Rubén
Poly(vinylidene fluoride) (PVDF) is a piezoelectric and thermoplastic material with great potential for additive manufacturing (AM) applications. Using barium titanate (BaTiO<inf>3</inf>) as filler, PVDF-based composite materials were developed, characterized, and processed by AM material extrusion (MEX). The morphological features and phase transformations occurring throughout the processing of BaTiO<inf>3</inf>-filled PVDF, from the compounding to the printed part, were analyzed. The morphology of the powder feedstock after dispersion in a high-energy ball mill changed from spheroidal to laminar and β-phase formation was favored. Microhardness gradually increased with the BaTiO<inf>3</inf> content, obtaining an enhancement of ~60% for a content of 25 vol%, and supported the good dispersion of the filler. A ~48% increase of the dielectric permittivity was also achieved. After extrusion, filaments with a filler content of 15 vol% showed a more stable diameter, as well as higher crystallinity and surface roughness, compared with those with lower BaTiO<inf>3</inf> contents. Material extrusion of filament and direct printing of pellets based on MEX were successfully used to obtain AM parts. Composite parts showed enhanced surface roughness, hydrophilicity, and flexural modulus (up to ~33% for the 7 vol% composite compared with the PVDF), thus leading to superior mechanical characteristics and potential biomedical applications. Highlights: Dry high-energy ball milling was a suitable greener dispersion approach. MEX processes were successfully used to obtain 3D-printed parts. The use of direct printing of pellets/powder improved the 3D printability. The surface roughness and hydrophilicity increased with the filler content. The permittivity and elastic modulus increased with the filler content., This contribution is part of the project TED2021-131458A-I00 funded by MCIN/AEI/10.13039/501100011033 and by the Unión Europea NextGenerationEU/PRTR, and the project PID2020-117648RB-I00 funded by MCIN/AEI/10.13039/501100011033. The authors also want to thank the Investigo Program (reference 8/1/2023-207084648) of the Canary Islands Employment Service, funded by Funds from the Recovery, Transformation and Resilience Plan—Next Generation EU., Peer reviewed