Pasar al contenido principal

DESCUBRIMIENTO IN-SILICO DE CONDUCTORES POROSOS

PID2020-119748GA-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE VALÈNCIA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 4
Encontrada(s) 1 página(s)

Minerva. Repositorio Institucional de la Universidad de Santiago de Compostela
Publicación Artículo científico (JournalArticle)

Structure–Performance Relationships in Anthraquinone-Disulfonate Coordination Polymers for Li-Ion and Na-Ion Battery Cathodes

  • Ribeiro, Catarina
  • Markowski, Robert
  • Mendes, Ricardo F.
  • Fernández-Alarcón, Alberto
  • Calbo, Joaquín
  • Rocha, João
  • Vlad, Alexandru
  • Souto Salom, Manuel
Coordination polymers (CPs) based on organic redox-active moieties offer a promising route to sustainable electrode materials for next-generation batteries. Herein, the synthesis, crystal structure determination, theoretical characterization, and electrochemical evaluation of a series of anthraquinone-disulfonate (AQDS) CPs incorporating Na+, Mg2+, and Cu2+ ions (AQDS-Na, AQDS-Mg, AQDS-Cu) as cathode materials for lithium-ion and sodium-ion storage are reported. Single-crystal X-ray diffraction reveals that AQDS-Na adopts a 3D framework, while AQDS-Mg and AQDS-Cu form 2D layered structures with coordinated water molecules. These structural differences significantly influence the electrochemical performance. For Li-ion storage, AQDS-Na delivers an initial capacity of 120 mAh g−1, while AQDS-Mg and AQDS-Cu show lower initial capacities (95 mAh g−1 and 106 mAh g−1, respectively) and faster fading. For Na-ion storage, the performance divergence is even more pronounced: AQDS-Na achieves a stable capacity of 91 mAh g−1 after 100 cycles, while AQDS-Mg and AQDS-Cu suffer from significant capacity loss (47 and 18 mAh g−1 after 100 cycles, respectively), attributed to the presence of coordinated water molecules in the 2D frameworks. This study highlights the importance of structural dimensionality and coordination environment in designing high-performance cathode materials for battery systems.
RUA. Repositorio Institucional de la Universidad de Alicante
Publicación Otros (Other)

Rational Design of 7-Azaindole-Based Robust Microporous Hydrogen-Bonded Organic Framework for Gas Sorption

  • Carrera, Manuel
  • Such-Basañez, Ion
  • Marco Lozar, Juan Pablo
  • Bueno López, Agustín
  • Vilaplana-Ortego, Eduardo
  • Silva, Iván da
  • Bautista, Delia
  • Fernández-Alarcón, Alberto
  • Calbo, Joaquín
  • Ortí Guillén, Enrique
  • Curiel, David
  • Bueno López, Agustín|||/items/ca551f75-6747-42ce-822c-1b9e7e44f027
7-Azaindole has been integrated as building block with complementary N−H⋅⋅⋅N hydrogen bonding sites for the synthesis of a tetrahedral molecular tecton, namely tetra(α-carbolin-6-yl)methane, TACM. The self-assembly of this molecule results in a 3D hydrogen-bonded organic framework (HOF). This supramolecular structure constitutes a crystalline microporous material with an extraordinary thermal and chemical robustness. Single crystal X-ray diffraction reveals how the five-fold catenation of diamonoid systems, stabilized by hydrogen bonds and π–π interactions, form an interpenetrated network with monodimensional channels. The structural features of the crystalline material are also observed by transmission electron microscopy (TEM). Additionally, the microporosity of the activated TACM-HOF is characterized by gas sorption (N2, CO2, CH4 and H2) experiments performed at different pressures. A selective adsorption is observed for CO2 uptake and TACM-HOF also presents a good adsorption capacity for H2 among supramolecular organic frameworks.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploiting the Redox Activity of MIL-100(Fe) Carrier Enables Prolonged Carvacrol Antimicrobial Activity

  • Caamaño, Katia
  • Heras-Mozos, Raquel
  • Calbo, Joaquín
  • Cases Díaz, Jesús
  • Waerenborgh, João C.
  • Vieira, Bruno J. C.
  • Hernández Muñoz, Pilar
  • Gavara, Rafael
  • Giménez Marqués, Mónica
The design of efficient food contact materials that maintain optimal levels of food safety is of paramount relevance to reduce the increasing number of foodborne illnesses. In this work, we develop a smart composite metal-organic framework (MOF)-based material that fosters a unique prolonged antibacterial activity. The composite is obtained by entrapping a natural food preserving molecule, carvacrol, into a mesoporous MIL-100(Fe) material following a direct and biocompatible impregnation method, and obtaining particularly high payloads. By exploiting the intrinsic redox nature of the MIL-100(Fe) material, it is possible to achieve a prolonged activity against Escherichia coli and Listeria innocua due to a triggered two-step carvacrol release from films containing the carvacrol@MOF composite. Essentially, it was discovered that based on the underlying chemical interaction between MIL-100(Fe) and carvacrol, it is possible to undergo a reversible charge-transfer process between the metallic MOF counterpart and carvacrol upon certain chemical stimuli. During this process, the preferred carvacrol binding site was monitored by infrared, Mössbauer, and electron paramagnetic resonance spectroscopies, and the results are supported by theoretical calculations., The authors acknowledge funding from MCIN/AEI/10.13039/501100011033 (grants PID2020-118564GA-I00, PID2020-119748GA-I00, and CEX2019-000919-M, grants RTI2018-093452-B-I00 and PRE2018-083355 included in Project MAT2017-89993-R funded by “ERDF A way of making Europe”, and grant BES-2016-077380 funded by “ESF Investing in your future”) and from Generalitat Valenciana (SEJI2020/036 and GV/2021/027). M.G.M. thanks MICIN for a “Ramón y Cajal (RYC2019-027902-I). IST authors acknowledge FCT (Portugal) support through contracts UID/Multi/04349/2019 and PTDC/QUI-QIN/32240/2017., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Through-space hopping transport in an iodine-doped perylene-based metal-organic framework

  • Valente, Gonçalo
  • Esteve-Rochina, María
  • Paracana, Ana
  • Rodríguez-Diéguez, Antonio
  • Choquesillo-Lazarte, Duane
  • Ortí, Enrique
  • Calbo, Joaquín
  • Ilkaeva, Marina
  • Mafra, Luís
  • Hernández-Rodríguez, Miguel A.
  • Rocha, João
  • Alves, Helena
  • Souto, Manuel
Electrically conductive metal-organic frameworks (MOFs) have emerged in the past few years as promising materials towards applications in (opto)electronics, electrocatalysis and energy storage, among others. One of the most common strategies for the design of conductive MOFs is based on the use of electroactive organic ligands and their partial oxidation/reduction to increase the number of charge carriers. Although perylene salts were reported as the first molecular conductors, they have been scarcely explored as building blocks for the construction of conductive MOFs. Herein we report the electrical conductivity enhancement of a microporous perylene-based MOF upon partial ligand oxidation by using two-probe single-crystal devices. The origin of the conductivity enhancement is rationalised by means of spectroscopic studies and quantum-chemical calculations, supporting a through-space hopping transport along the herringbone perylene packing. This study opens the way for the design of conductive MOFs based on perylene building blocks., This work was developed within the scope of the project CICECO-Aveiro Institute of Materials, Grants UIDB/50011/2020 and UIDP/50011/2020, financed by national funds through the FCT/MEC and when appropriate co-financed by FEDER under the PT2020 Partnership Agreement. We thank FCT for funding the project PTDC/QUI-ELT/2593/2021. We acknowledge Spanish government (PID2020-119748GA-I00, funded by MICIN/AEI/10.13039/501100011033, and the Maria de Maeztu CEX2019-000919-M grant) and Generalitat Valenciana (GV/2021/027, GVPROMETEO2020-077). G. V. is grateful to FCT for a PhD grant (2020.08520.BD). A. P. is grateful to FCT for a PhD grant (2020.06159.BD). FCT is also acknowledged by M. I. for a Junior Researcher Position (CEECIND/00546/2018). We thank Celeste Azevedo for TGA and Raman measurements. We thank Prof. Luís Carlos and Prof. Carlos Brites (Phantom-G) for the use and assistance with spectrofluorimeter and quantum yield equipment. We thank Prof. Nikolai Sobolev for EPR measurements.