Pasar al contenido principal

ANTIMICROBIAL FOOD PACKAGING BASED ON DYNAMIC POLYMERS WHOSE ACTIVITY IS TRIGGERED BY EXTERNAL STIMULI

RTI2018-093452-B-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2018
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Envases activos portadores de microorganismos para la bioconservación de alimentos

  • Settier Ramírez, Laura
[ES] La presente tesis doctoral plantea distintas estrategias para el desarrollo y aplicación de envases activos portadores de agentes de biocontrol, con el fin de inhibir la proliferación de microorganismos como bacterias y hongos patógenos y alterantes y así, conseguir aumentar la seguridad y prolongar la vida útil de los alimentos. El desarrollo de envases activos antibacterianos se llevó a cabo incorporando bacterias ácido lácticas productoras de bacteriocinas, Lactococcus lactis y Lactobacillus sakei en diferentes matrices formadoras de películas. Previa a la preparación de las películas activas, se estudió la actividad antimicrobiana de los agentes naturales seleccionados frente a Listeria monocytogenes. Los resultados sugirieron que, a partir de una determinada concentración inicial de bacterias viables, estos microorganismos son buenos candidatos para ser utilizados como aditivos naturales en materiales de envasado de alimentos, siendo una alternativa al uso de aditivos de origen sintético. En este trabajo se observó que la viabilidad inicial de las bacterias ácido lácticas (LAB) es esencial para obtener una buena capacidad antibacteriana por lo que la optimización de la composición de las películas o recubrimientos fue crucial para su aplicación con éxito. El polímero escogido como base para hacer las películas y recubrimientos mediante la técnica de casting, fue el alcohol polivinílico, (PVOH) mezclado con diferentes proteínas, gelatina y caseinato sódico y sus versiones hidrolizadas añadidas en diferentes proporciones. En este estudio L. lactis demostró tener una mayor resistencia a la deshidratación durante la preparación y almacenamiento de las películas que L. sakei. Las películas de PVOH mezcladas con gelatina hidrolizada y caseína hidrolizada dotaron de protección a las bacterias ácido lácticas durante el secado y demostraron tener una mayor efectividad antilisteria. Por último, se varió la proporción de caseína hidrolizada obteniendo una mayor viabilidad de las bacterias en las películas prolongada en el tiempo a mayor proporción de HCas. Para desarrollar un envase activo antilisteria, se adaptaron las matrices para ser aplicadas como recubrimiento sobre ácido poliláctico (PLA) con el objetivo de desarrollar bolsas activas antilisteria para crema de setas y como separadores de lonchas de jamón cocido. Los recubrimientos demostraron tener una efectividad similar a la obtenida con las películas in vitro. Sin embargo, su eficacia disminuyó ligeramente al ser aplicadas en la crema de champiñones y el jamón cocido debido a la complejidad de las matrices alimentarias utilizadas, pero siendo una buena herramienta para, junto a otras estrategias de conservación, asegurar la salubridad de los alimentos. Se llevaron a cabo ensayos sensoriales con consumidores y se obtuvo una buena aceptación de ambos productos. Sin embargo, los consumidores percibieron una alteración del sabor debido a la generación de ácido láctico en la crema de champiñones, acidez que puede ser controlada mediante correctores de acidez sin modificar la efectividad antimicrobiana. Para desarrollar envases que aumentaran la vida útil, se trabajó para ampliar el espectro de acción de L. lactis frente a las bacterias Gram-negativas, normalmente responsables de la descomposición de los alimentos. Combinar el agente de biocontrol productor de nisina, L. lactis, con una baja concentración de ácido fítico, sustancia quelante y desestabilizadora de la membrana bacteriana, amplió el espectro antimicrobiano de L. lactis frente a las bacterias Gram-negativas obteniendo una nueva herramienta para garantizar la seguridad alimentaria y prolongar la vida útil de los alimentos., [CA] La present tesi doctoral planteja diferents estratègies per al desenvolupament i aplicació d'envasos actius portadors d'agents de biocontrol, amb la finalitat d'inhibir la proliferació de microorganismes com a bacteris i fongs patògens i alteradors i així, aconseguir augmentar la seguretat i prolongar la vida útil dels aliments. El desenvolupament d'envasos actius antibacterians, es va dur a terme incorporant bacteris àcid làctics productores de bacteriocines, Lactococcus lactis i Lactobacillus sakei en diferents matrius formadores de pel·lícules. Prèvia a la preparació de les pel·lícules actives, es va estudiar l'activitat antimicrobiana dels agents naturals seleccionats enfront de Listeria monocytogenes. Els resultats van suggerir que, a partir d'una determinada concentració inicial de bacteris viables, aquests microorganismes són bons candidats per a ser utilitzats com a additius naturals en materials d'envasament d'aliments, sent una alternativa a l'ús d'additius d'origen sintètic. En aquest treball es va observar que la viabilitat inicial dels bacteris àcid làctics (LAB) és essencial per a obtindre una bona capacitat antibacteriana pel que l'optimització de la composició de les pel·lícules o recobriments va ser crucial per a la seua aplicació amb èxit. El polímer triat com a base per a fer les pel·lícules i recobriments mitjançant la tècnica de càsting, va ser l'alcohol polivinílic, (PVOH) mesclat amb diferents proteïnes, gelatina i caseinat sòdic i les seues versions hidrolitzades afegides en diferents proporcions. En aquest estudi L. lactis va demostrar tindre una major resistència a la deshidratació durant la preparació i emmagatzematge de les pel·lícules que L. sakei. Les pel·lícules de PVOH mesclades amb gelatina hidrolitzada i caseina hidrolitzada van dotar de protecció als bacteris àcid làctics durant l'assecat i van demostrar tindre una major efectivitat antilistèria. Finalment, es va variar la proporció de caseïna hidrolitzada obtenint una millor resposta de les pel·lícules no sols des d'un punt de vista antimicrobià, sinó també de les propietats fisicoquímiques de les pel·lícules, a major proporció de caseïna hidrolitzada.Per a desenvolupar un envàs actiu antilistèria, es van adaptar les matrius per a ser aplicades com a recobriment sobre àcid polilàctic (PLA) amb l'objectiu de desenvolupar bosses actives antilistèria per a crema de bolets i com a separadors de rodanxes de pernil cuit. Els recobriments van demostrar tindre una efectivitat similar a l'obtinguda amb les pel·lícules in vitro. No obstant això, la seua eficàcia va disminuir lleugerament en ser aplicades en la crema de xampinyons i el pernil cuit a causa de la complexitat de les matrius alimentàries utilitzades, però sent una bona eina per a, al costat d'altres estratègies de conservació, assegurar la salubritat dels aliments. Es van dur a terme assajos sensorials amb consumidors i es va obtindre una bona acceptació de tots dos productes, però una alteració del sabor degut a la generació d'àcid làctic en la crema de xampinyons corregible mitjançant correctors d'acidesa sense modificació de l'efectivitat antimicrobiana. Per a desenvolupar envasos que augmentaren la vida útil, es va treballar per a ampliar l'espectre d'acció de L. lactis enfront dels bacteris Gram-negatives, normalment responsables de la descomposició dels aliments. Combinar l'agent de biocontrol productor de nisina, L. lactis, amb una baixa concentració d'àcid fític, substància quelant i desestabilitzadora de la membrana bacteriana, va ampliar l'espectre antimicrobià de L. lactis enfront dels bacteris Gram-negatives obtenint una nova eina per a garantir la seguretat alimentària i prolongar la vida útil dels aliments., [EN] This doctoral thesis proposes different strategies for the development and application of active packaging containing biocontrol agents, to inhibit the proliferation of microorganisms such as pathogenic and spoilage bacteria and fungi, thus increasing the safety and increasing the shelf life of foodstuffs. The development of antibacterial active packaging was carried out by incorporating bacteriocin-producing lactic acid bacteria, Lactococcus lactis and Lactobacillus sakei in different film-forming matrices. Prior to the preparation of the active films, the antimicrobial activity of the selected natural agents against Listeria monocytogenes was studied. The results suggested that, from a certain initial concentration of viable bacteria, these microorganisms are good candidates to be used as natural additives in food packaging materials, being an alternative to the use of additives of synthetic origin. In this work it was observed that the initial viability of lactic acid bacteria (LAB) is essential to obtain a good antibacterial capacity, so the optimization of the composition of the films or coatings was crucial for their successful application. The polymer chosen as a base to make the films and coatings by casting technique was polyvinyl alcohol (PVOH) mixed with different proteins, gelatin and sodium caseinate and their hydrolysed versions added in different proportions. In this study L. lactis showed higher resistance to dehydration during film preparation and storage than L. sakei. PVOH films mixed with hydrolysed gelatin and hydrolysed casein provided protection to lactic acid bacteria during drying and were shown to have a greater antilisteria effectiveness. Finally, the proportion of hydrolysed casein was varied, obtaining a better response of the films not only from an antimicrobial point of view, but also from the physicochemical properties of the films, the higher the proportion of HCas. To develop an antilisteria active packaging, the matrices were adapted to be applied as a coating on polylactic acid (PLA) with the objective of developing antilisteria active bags for cream of mushroom soup and as separator liner for cooked ham slices. The coatings showed similar effectiveness to that obtained with in vitro films. However, their effectiveness decreased slightly when applied to mushroom soup and cooked ham due to the complexity of the food matrices used, but being a good tool to, together with other preservation strategies, ensure food wholesomeness. Sensory tests were carried out with consumers and a good acceptance of both products was obtained. However, an alteration of taste due to the generation of lactic acid was detected in the mushroom soup that could be corrected by means of acidity correctors without modifying the antimicrobial effectiveness. Finally, life cycle analysis of conventional and active packaging for pastry cream was studied. In any case, despite the limitations regarding the waste product estimation, shelf-life extension through packaging innovation could significantly reduce the environmental impacts of the entire food packaging system. In the present thesis, the potential use of indigenous yeasts with antifungal capacity for the control of Penicillium expansum and the control of the mycotoxin they generate, called patulin, was also explored. In the present investigation, three new yeast strains isolated from the surface of apples were selected for their efficacy against P. expansum. The yeasts were identified as Metschnikowia pulcherrima being 3 different strains. The ability of these yeasts for patulin biodegradation was also demonstrated. Then, different studies on the viability of the yeast and its antifungal effectiveness on different films made with biopolymers naturally present in apples (pectin, cellulose ethers, and apple pomace) were carried out., The authors acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness (AGL2015-64595-R and RTI2018-093452-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Melt-Processed Bioactive EVOH Films Incorporated with Ferulic Acid

  • Aragón-Gutiérrez, Alejandro
  • Rosa, Estela
  • Gallur, Miriam
  • López, Daniel
  • Hernández-Muñoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] In this work, antimicrobial and antioxidant films based on ethylene vinyl alcohol (EVOH) copolymer containing low amounts of ferulic acid (FA) were successfully developed by melt extrusion. Optically transparent films were obtained, and the presence of FA provided some UV blocking effect. The characterization of the thermal and barrier properties of the developed films showed that the addition of FA improved the thermal stability, decreased the glass transition temperature (T-g) and increased the water vapor and oxygen transmission rates when ferulic acid was loaded above 0.5 wt.%, associated with its plasticizing effect. Mechanical characterization confirmed the plasticizing effect by an increase in the elongation at break values while no significant differences were observed in Young's modulus and tensile strength. Significant antioxidant activity of all active films exposed to two food simulants, 10% ethanol and 95% ethanol, was also confirmed using the 2,2-diphenyl-1-pricylhydrazyl (DPPH) free radical scavenging method, indicating that FA conserved its well-known antioxidant properties after melt-processing. Finally, EVOH-FA samples presented antibacterial activity in vitro against Escherichia coli and Staphylococcus aureus, thus showing the potential of ferulic acid as bioactive compound to be used in extrusion processing for active packaging applications., This research was funded by the European Regional Development Fund (ERDF, EU), within the Programa Operativo FEDER CV 2014-2020 de la Comunidad Valenciana , project number IMDEEA/2019/78, and by the Spanish Ministry of Science and Innovation (CICYT RTI2018-093452-B-I00).
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Artículo científico (JournalArticle)

Pilot-Scale Processing and Functional Properties of Antifungal EVOH-Based Films Containing Methyl Anthranilate Intended for Food Packaging Applications

  • Aragón-Gutiérrez, Alejandro
  • Heras-Mozos, Raquel
  • Montesinos, Antonio
  • Gallur, Miriam
  • López, Daniel
  • Hernández-Muñoz, Pilar
  • GAVARA CLEMENTE, RAFAEL|||0000-0001-6376-8939
[EN] Antimicrobial packaging has emerged as an efficient technology to improve the stability of food products. In this study, new formulations based on ethylene vinyl alcohol (EVOH) copolymer were developed by incorporating the volatile methyl anthranilate (MA) at different concentrations as antifungal compound to obtain active films for food packaging. To this end, a twin-screw extruder with a specifically designed screw configuration was employed to produce films at pilot scale. The quantification analyses of MA in the films showed a high retention capacity. Then, the morphological, optical, thermal, mechanical and water vapour barrier performance, as well as the antifungal activity in vitro of the active films, were evaluated. The presence of MA did not affect the transparency or the thermal stability of EVOH-based films, but decreased the glass transition temperature of the copolymer, indicating a plasticizing effect, which was confirmed by an increase in the elongation at break values of the films. Because of the additive-induced plasticization over EVOH, the water vapour permeability slightly increased at 33% and 75% relative humidity values. Finally, the evaluation of the antifungal activity in vitro of the active films containing methyl anthranilate showed a great effectiveness against P. expansum and B. cinerea, demonstrating the potential applicability of the developed films for active food packaging., The authors wish to thank Generalitat Valenciana (Grant IMAMCM/2021/1) and the Spanish Ministry of Science and Innovation (Grants RTI2018-093452-B-I00 and BES-2016-077380 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe) for the financial support.
RiuNet. Repositorio Institucional de la Universitat Politécnica de Valéncia
Publicación Tesis doctoral (DoctoralThesis)

Envases activos basados en el anclaje covalente reversible de compuestos antimicrobianos en quitosano

  • Heras Mozos, Raquel
[ES] La presente Tesis Doctoral plantea el desarrollo de sistemas antimicrobianos basados en el anclaje covalente reversible de aldehídos de origen natural con actividad antimicrobiana en películas de quitosano para su aplicación en el envasado de alimentos. En primer lugar, se desarrolló un protocolo para la formación de bases de Schiff o iminas de diferentes aldehídos en películas de quitosano. Estas iminas son producto de la condensación de los grupos amino primarios del quitosano con los grupos carbonilo del aldehído. El anclaje de dichos aldehídos, en su mayoría de elevada volatilidad, permite su estabilización a largo plazo en estructuras poliméricas, facilitando su manejo. Las iminas son hidrolizables, y dicha hidrólisis está favorecida a pH < 5, por lo que la naturaleza reversible del enlace ofrece un mecanismo para controlar la liberación del antimicrobiano. Previamente a su anclaje, se evaluó la capacidad antimicrobiana de los aldehídos frente a diversos microorganismos patógenos y alterantes alimentarios. Se caracterizó el enlace imina mediante técnicas espectroscópicas y se cuantificó la incorporación del aldehído a la película de quitosano mediante análisis elemental. Adicionalmente otras propiedades funcionales del material fueron evaluadas, como propiedades térmicas, ópticas o de absorción de agua. En segundo lugar, se evaluó la reversibilidad del enlace imina o base de Schiff por el contacto con soluciones acuosas de diferente acidez. La respuesta al pH de las películas permitió determinar la mayor estabilidad del enlace imina a pH neutros, mientras que a pH ácidos resultó más hidrolizable, permitiendo así una mayor liberación del aldehído anclado. Las películas activas desarrolladas mostraron una buena respuesta antimicrobiana contra Botrytis cinerea y Penicillium expansum, al someterlas a una solución de pH ácido. La respuesta antimicrobiana de las películas se debió exclusivamente a la liberación del aldehído al espacio de cabeza tras la hidrólisis de la imina. La estructura química de los aldehídos tuvo un impacto significativo en la formación de iminas y en las propiedades de la película, así como en su reversibilidad. Así, la presencia del doble enlace (Ca=Cß) en aldehídos a,ß-insaturados podría generar otro tipo de enlaces como la adición de Michael, permitiendo obtener matrices entrecruzadas y más estables que sus análogos saturados. El grado de entrecruzamiento y propiedades de estas películas puede ser modulado por el pH del medio empleado en su síntesis. Para la aplicación tecnológica de las películas antimicrobianas de quitosano con los volátiles anclados reversiblemente, se trabajó con productos de postcosecha frescos o mínimamente procesados. Se empleó la respuesta al pH de las películas siguiendo diferentes estrategias. Por una parte, el sistema se incorporó en el envasado de moras frescas, para ello, se diseñó un envase de doble fondo dónde depositar las películas junto con el medio activador. Se redujo satisfactoriamente el crecimiento de hongos sobre la superficie de la fruta, aumentando el tiempo de vida útil de las moras envasadas de 3 a 12 días. Por otra parte, se envasó piña fresca cortada empleando el mismo diseño del envase, de forma que el jugo ácido exudado por la piña durante su almacenamiento catalizó la hidrólisis de la imina. Las películas activas mejoraron la calidad y redujeron la carga microbiana habitual de la piña, observando una reducción notable respecto al control a partir del día 9. Por último, la actividad antimicrobiana de las películas activas se evaluó en un alimento líquido refrigerado inoculado con E. coli. La acidez del zumo provocó la liberación del aldehído al medio inhibiendo el crecimiento del patógeno. Las películas de quitosano con los aldehídos anclados presentaron respuesta al pH, mostrando una mayor capacidad antimicrobiana al ser sometidas a pH ácido, y pudiendo emplearse en el diseño de envases activos antimicrobianos., [CA] Aquesta Tesi Doctoral planteja el desenvolupament de sistemes antimicrobians basats en l'ancoratge covalent reversible d'aldehids d'origen natural amb activitat antimicrobiana en pel·lícules de quitosà per aplicar-les a l'envasament d'aliments. En primer lloc, es va desenvolupar un protocol per a la formació de bases de Schiff o imines de diferents aldehids en pel·lícules de quitosà. Aquestes imines són el producte de la addició nucleòfila dels grups amino del quitosà al carbonil de l'aldehid que s'ancorarà. L'ancoratge d'aquests aldehids, majoritàriament d'elevada volatilitat, permet la seva estabilització a llarg termini en estructures polimèriques, facilitant-ne el seu maneig. Les imines són hidrolitzables, i aquesta hidròlisi està afavorida a pH < 5, per la qual cosa la naturalesa reversible de l'enllaç ofereix un mecanisme per controlar l'alliberament de l'antimicrobià. Prèviament a la incorporació d'aquests compostos a les pel·lícules de quitosà, es va avaluar la capacitat antimicrobiana dels aldehids davant de diversos microorganismes patògens i alterants d'aliments. Es va caracteritzar l'enllaç imina mitjançant tècniques espectroscòpiques i es va quantificar la incorporació de l'aldehid a la pel·lícula de quitosà mitjançant anàlisi elemental. Addicionalment, altres propietats funcionals del material van ser avaluades, com a propietats tèrmiques, òptiques o d'absorció d'aigua, verificant la modificació del polímer. En segon lloc, es va avaluar la reversibilitat de l'enllaç imina o base de Schiff pel contacte amb solucions aquoses de diferent acidesa. La resposta al pH de les pel·lícules va permetre determinar la major estabilitat de l'enllaç imina a pH neutres, mentre que a pH àcids va resultar més hidrolitzable, permetent així un alliberament més gran de l'aldehid ancorat. Les pel·lícules actives desenvolupades van mostrar una bona resposta antimicrobiana contra Botrytis cinerea i Penicillium expansum,la qual és deguda exclusivament a l'alliberament de l'aldehid a l'espai de cap després de la hidròlisi de la imina. L'estructura química dels aldehids va tenir un impacte significatiu en la formació d'imines i en les propietats de la pel·lícula, així com en la reversibilitat. Així, la presència del doble enllaç (Ca=Cß) en aldehids a,ß-insaturats podria generar un altre tipus d'enllaços com l'addició de Michael, permetent obtenir matrius entrecreuades i més estables que els seus anàlegs saturats, el qual pot ser modulat pel pH del medi emprat a la síntesi. Per a l'aplicació tecnològica de les pel·lícules antimicrobianes de quitosà amb els volàtils ancorats reversiblement, es va treballar amb productes de postcollita frescos o mínimament processats. Es va emprar la resposta al pH de les pel·lícules seguint diferents estratègies. D'una banda, el sistema es va incorporar a l'envasat de móres fresques, per això es va dissenyar un envàs de doble fons on dipositar les pel·lícules juntament amb el medi activador a pH àcid. Es va reduir satisfactòriament el creixement de fongs sobre la superfície de la fruita, augmentant el temps de vida útil de les móres envasades de 3 a 12 dies. D'altra banda, es va envasar pinya fresca tallada emprant el mateix disseny de l'envàs, de manera que el suc àcid exsudat per la pinya durant el seu emmagatzematge va afavorir la hidròlisi de la imina. Les pel·lícules actives van millorar la qualitat i van reduir la càrrega microbiana habitual de la pinya, observant una reducció notable a partir del dia 9. Per acabar, l'activitat antimicrobiana de les pel·lícules actives es va avaluar en un aliment líquid refrigerat i inoculat amb E. coli. L'acidesa del suc va provocar l'alliberament de l'aldehid al medi inhibint el creixement del patogen. Les pel·lícules de quitosà amb els aldehids ancorats van presentar resposta al pH, mostrant una major capacitat antimicrobiana en ser sotmeses a pH àcid, i podent emprar-se en el disseny d'envasos actius antimicrobians., [EN] This Doctoral Thesis proposes the development of antimicrobial systems based on the reversible covalent anchoring of naturally occurring aldehydes with antimicrobial activity in chitosan films for their application in food packaging. First, a protocol for the formation of Schiff bases or imines of different aldehydes on chitosan films was developed. These imines are the product of the condensation of the primary amino groups of chitosan with the carbonyl groups of the aldehyde. The immobilization of these aldehydes, most of which are highly volatile, allows their long-term stabilisation in polymeric structures, facilitating their handling. The imines are hydrolysable, and its hydrolysis is favoured at pH < 5, so the reversible nature of the bond provides a mechanism to control the antimicrobial release. Prior to the incorporation of these compounds into chitosan films, the antimicrobial capacity of aldehydes was evaluated against various pathogenic and food spoilage microorganisms. The formed imine bond was characterised by spectroscopic techniques and the incorporation of the aldehyde into the chitosan film was quantified by elemental analysis. Additionally, other functional properties were evaluated, such as thermal, optical and water absorption properties, verifying the modification of the polymer. Secondly, the reversibility of the imine bond or Schiff's base was evaluated by contact with aqueous solutions of different acidity. The pH response of the films allowed determining the higher stability of the imine bond at neutral pH, while at acidic pH it was more hydrolysable, leading a higher release of the anchored aldehyde The developed active films showed a good antimicrobial response against Botrytis cinerea and Penicillium expansum, especially when subjected to an acidic pH solution. The antimicrobial response of the films was exclusively due to the aldehyde released into the headspace after imine hydrolysis. The chemical structure of the aldehydes had a significant impact on imine formation and film properties, as well as on their reversibility. Thus, the presence of the double bond (Ca=Cß) in a,ß-unsaturated aldehydes could generate other types of bonds such as Michael addition, allowing cross-linked polymer, which are more stable than their saturated analogues. The degree of cross-linking and properties of these films can be modulated by the pH of the medium used in their synthesis. For the technological application of chitosan antimicrobial films with reversibly grafted volatiles, fresh or minimally processed post-harvest products were used. The pH response of the films was used following different strategies. On the one hand, the system was incorporated in the packaging of fresh blackberries, for this purpose, a double-bottom package was designed to deposit the films together with the activating medium at acid pH. The solution was added at the time of fruit packaging and allowed the imine bond to be hydrolysed subsequently the aldehyde release into the headspace where it exerted its function. Fungal growth on the fruit surface was successfully reduced, increasing the shelf life of the packed blackberries from 3 to 12 days. Moreover, fresh cut pineapple was packaged using the same packaging design, so that the exuded juice by the pineapple during storage favoured the imine hydrolysis. The active films improved the quality and reduced the usual microbial load of the pineapple, with a noticeable reduction compared to the control from day 9 onwards. Finally, the antimicrobial activity of the active films was evaluated in a refrigerated liquid food inoculated with E. coli. The acidity of the juice resulted in the release of aldehyde into the medium inhibiting the growth of the pathogen. The aldehyde immobilization in chitosan films were pH-responsive, showing a higher antimicrobial capacity when subjected to acidic pH, which can be used in the design of antimicrobial active packaging., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation (Grants RTI2018-093452-B- I00, MAT2017-83014-C2-2P and BES-2016-077380 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe)
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Melt-Processed Bioactive EVOH Films Incorporated with Ferulic Acid

  • Aragón-Gutiérrez, Alejandro
  • Rosa, Estela
  • Gallur, Miriam
  • López García, Daniel
  • Hernández Muñoz, Pilar
  • Gavara, Rafael
In this work, antimicrobial and antioxidant films based on ethylene vinyl alcohol (EVOH) copolymer containing low amounts of ferulic acid (FA) were successfully developed by melt extrusion. Optically transparent films were obtained, and the presence of FA provided some UV blocking effect. The characterization of the thermal and barrier properties of the developed films showed that the addition of FA improved the thermal stability, decreased the glass transition temperature (T<sub>g</sub>) and increased the water vapor and oxygen transmission rates when ferulic acid was loaded above 0.5 wt.%, associated with its plasticizing effect. Mechanical characterization confirmed the plasticizing effect by an increase in the elongation at break values while no significant differences were observed in Young’s modulus and tensile strength. Significant antioxidant activity of all active films exposed to two food simulants, 10% ethanol and 95% ethanol, was also confirmed using the 2,2-diphenyl-1-pricylhydrazyl (DPPH) free radical scavenging method, indicating that FA conserved its well-known antioxidant properties after melt-processing. Finally, EVOH-FA samples presented antibacterial activity in vitro against <i>Escherichia coli</i> and <i>Staphylococcus aureus</i>, thus showing the potential of ferulic acid as bioactive compound to be used in extrusion processing for active packaging applications., This research was funded by the European Regional Development Fund (ERDF, EU), within the “Programa Operativo FEDER CV 2014-2020 de la Comunidad Valenciana”, project number IMDEEA/2019/78, and by the Spanish Ministry of Science and Innovation (CICYT RTI2018-093452-B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Hot-Melt-Extruded Active Films Prepared from EVOH/Trans-Cinnamaldehyde Blends Intended for Food Packaging Applications

  • Aragón-Gutiérrez, Alejandro
  • Heras-Mozos, Raquel
  • Gallur, Miriam
  • López García, Daniel
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
In this work, novel active films based on ethylene vinyl alcohol copolymer (EVOH) and cinnamaldehyde (CIN) were successfully obtained employing a hybrid technique consisting of a two-step protocol involving the preparation of a polymeric EVOH-CIN masterbatch by solvent-casting for its further utilization in the preparation of bioactive EVOH-based films by melt extrusion processing. The influence of CIN over the EVOH matrix was studied in terms of optical, morphological, thermal, and mechanical properties. Optically transparent films were obtained and the incorporation of cinnamaldehyde resulted in yellow-colored films, producing a blocking effect in the UV region. A decrease in the glass transition temperature was observed in the formulations containing cinnamaldehyde, indicating a plasticizing effect. This phenomenon was confirmed by an increase in the elongation at break values of the extruded films. Results from thermogravimetric analysis determined a slight decrease in the thermal stability of EVOH provoked by the vaporization of the bioactive compound. Bioactive properties of the films were also studied; the presence of residual cinnamaldehyde in EVOH after being subjected to an extrusion process conferred some radical scavenging activity determined by the DPPH assay whereas films were able to exert antifungal activity in vapor phase against <i>Penicillium expansum</i>. Therefore, the present work shows the potential of the hybrid technique employed in this study for the preparation of bioactive films by a ready industrial process technology for food packaging applications., This research was funded by the European Regional Development Fund (ERDF, EU), within the “Programa Operativo FEDER CV 2014–2020 de la Comunidad Valenciana”, project number IMDEEA/2019/78. Gavara and Hernández-Muñoz want to thank the Spanish Ministry of Science, Innovation and Universities for financial support (project RTI2018-093452-B-I00) and Heras’ predoctoral contract, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effect of casein hydrolysates on the survival of protective cultures of Lactococcus lactis and Lactobacillus sakei in PVOH films

  • Settier Ramírez, Laura
  • López-Carballo, Gracia
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
The aim of this work has been to explore the potential of blending polyvinyl alcohol (PVOH) with casein hydrolysates (HCas) to obtain self-standing films capable to act as carriers of lactic acid bacteria (LAB) as biocontrol agents against food pathogens. For this purpose, PVOH was blended with HCas at different weight ratios and the blends were incorporated with Lactococcus lactis and Lactobacillus sakei. Blending HCas with PVOH resulted in the modification of some functional properties of the films whereas bacteria did not change them. Moreover, incorporation of HCas resulted in an increase in cell viability after film casting and in long-term film storage, and also in film antilisterial properties. These results could be related to the capacity of bacterial autoaggregation in the films during the drying process when HCas was added, as observed by fluorescence light microscopy. Blends could be used in the active packaging of foods., The authors acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities (AGL2015-64595-R, RTI2018-093452-B-I00)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Exploiting the Redox Activity of MIL-100(Fe) Carrier Enables Prolonged Carvacrol Antimicrobial Activity

  • Caamaño, Katia
  • Heras-Mozos, Raquel
  • Calbo, Joaquín
  • Cases Díaz, Jesús
  • Waerenborgh, João C.
  • Vieira, Bruno J. C.
  • Hernández Muñoz, Pilar
  • Gavara, Rafael
  • Giménez Marqués, Mónica
The design of efficient food contact materials that maintain optimal levels of food safety is of paramount relevance to reduce the increasing number of foodborne illnesses. In this work, we develop a smart composite metal-organic framework (MOF)-based material that fosters a unique prolonged antibacterial activity. The composite is obtained by entrapping a natural food preserving molecule, carvacrol, into a mesoporous MIL-100(Fe) material following a direct and biocompatible impregnation method, and obtaining particularly high payloads. By exploiting the intrinsic redox nature of the MIL-100(Fe) material, it is possible to achieve a prolonged activity against Escherichia coli and Listeria innocua due to a triggered two-step carvacrol release from films containing the carvacrol@MOF composite. Essentially, it was discovered that based on the underlying chemical interaction between MIL-100(Fe) and carvacrol, it is possible to undergo a reversible charge-transfer process between the metallic MOF counterpart and carvacrol upon certain chemical stimuli. During this process, the preferred carvacrol binding site was monitored by infrared, Mössbauer, and electron paramagnetic resonance spectroscopies, and the results are supported by theoretical calculations., The authors acknowledge funding from MCIN/AEI/10.13039/501100011033 (grants PID2020-118564GA-I00, PID2020-119748GA-I00, and CEX2019-000919-M, grants RTI2018-093452-B-I00 and PRE2018-083355 included in Project MAT2017-89993-R funded by “ERDF A way of making Europe”, and grant BES-2016-077380 funded by “ESF Investing in your future”) and from Generalitat Valenciana (SEJI2020/036 and GV/2021/027). M.G.M. thanks MICIN for a “Ramón y Cajal (RYC2019-027902-I). IST authors acknowledge FCT (Portugal) support through contracts UID/Multi/04349/2019 and PTDC/QUI-QIN/32240/2017., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Dynamic covalent chemistry of imines for the development of stimuli-responsive chitosan films as carriers of sustainable antifungal volatiles

  • Heras-Mozos, Raquel
  • Hernández, Rebeca
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
The aim of this work was to develop pH-responsive antifungal chitosan (CS) films based on the reversible bonding of the naturally occurring volatile aldehydes: cinnamaldehyde (CN), citral (CT) and their saturated derivatives hydrocinnamaldehyde (HC) and citronellal (CO) that have antifungal properties. Acid-catalyzed bonds were created by condensation of the carbonyl functional group of aldehydes with amino groups in CS films to yield imines which was confirmed by Attenuated Total Reflectance – Fourier Transform Infrared Spectroscopy (ATR-FTIR) and C solid-state nuclear magnetic resonance (C NMR). α,β-unsaturated CN and CT were more reactive than their derivatives, reaching around 60% degree of substitution of aldehydes to chitosan films compared to 25% for HC and CO. Imines created with α,β-unsaturated aldehydes and aromatic HC remained quite stable at neutral pH. With regard to the hydrolysis of imines at pH 4, around 35% of anchored α,β-unsaturated aldehydes were lost, this value being 80% for HC whereas 100% of CO was lost after the first week of film immersion in buffered solution. The differences in the extent of hydrolysis of imine bonds depended on both the pH of the aqueous medium and also the chemical structure of the aldehyde. Curiously, it was observed α,β-unsaturated aldehydes exerted crosslinking effects on CS films since they did not disintegrate in water at pH 3. The crosslinking mechanism is discussed in the text. The antifungal activities of the developed films were tested against Penicillium expansum and Botrytis cinerea by the micro-atmosphere method using a double Petri dish system. Mold growth was completely inhibited by imine-CN-CS films activated at pH 4., The authors acknowledge Levi Lopez Vilanova for solid state NMR measurements. The authors want to thank the Spanish Ministry of Sci- ence, Innovation and Universities for financial support (projects RTI2018-093452-B-I00 and MAT2017-83014-C2-2-P and R. Heras’s predoctoral contract). P. H-M, RG and RH are members of the Inter- disciplinary Platform for Sustainable Plastics towards a Circular Econ- omy (SusPlast) from the Spanish National Research Council (CSIC, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Responsive packaging based on imine-chitosan films for extending the shelf-life of refrigerated fresh-cut pineapple

  • Heras-Mozos, Raquel
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
Reversible imine chemistry has been employed to stabilize antimicrobial liquid volatiles trans-2-hexenal (HX) and salicylaldehyde (SL) to the surface of chitosan films. The reactivity of both aldehydes to amine groups of chitosan was high and the synthesis of imine bonds was assessed by ATR-FTIR. The hydrolysis of the bonds and the release of the aldehydes depended on the pH of the medium. Films exerted in vitro microbiocidal effect against E. coli, S. cerevisae and pineapple wild yeast when were immersed at pH 3.6. Finally, films were incorporated in the double-bottom of plastic containers filled with fresh-cut pineapple maintained at 4 °C for 18 days. Juice leakage from pineapple pieces triggered the release of aldehydes to the headspace of the package. Both aldehydes extended microbiological shelf-life of fruit and slowed down browning. SL increased juice leakage from fruit and affected firmness negatively., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation (Grant RTI2018-093452-B-100, BES-2016-077380 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe). P. H-M and RG are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast) from the Spanish National Research Council (CSIC) (CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Pilot-Scale Processing and Functional Properties of Antifungal EVOH-Based Films Containing Methyl Anthranilate Intended for Food Packaging Applications

  • Aragón-Gutiérrez, Alejandro
  • Heras-Mozos, Raquel
  • Montesinos, Antonio
  • Gallur, Miriam
  • López García, Daniel
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
Antimicrobial packaging has emerged as an efficient technology to improve the stability of food products. In this study, new formulations based on ethylene vinyl alcohol (EVOH) copolymer were developed by incorporating the volatile methyl anthranilate (MA) at different concentrations as antifungal compound to obtain active films for food packaging. To this end, a twin-screw extruder with a specifically designed screw configuration was employed to produce films at pilot scale. The quantification analyses of MA in the films showed a high retention capacity. Then, the morphological, optical, thermal, mechanical and water vapour barrier performance, as well as the antifungal activity in vitro of the active films, were evaluated. The presence of MA did not affect the transparency or the thermal stability of EVOH-based films, but decreased the glass transition temperature of the copolymer, indicating a plasticizing effect, which was confirmed by an increase in the elongation at break values of the films. Because of the additive-induced plasticization over EVOH, the water vapour permeability slightly increased at 33% and 75% relative humidity values. Finally, the evaluation of the antifungal activity in vitro of the active films containing methyl anthranilate showed a great effectiveness against P. expansum and B. cinerea, demonstrating the potential applicability of the developed films for active food packaging., The authors wish to thank Generalitat Valenciana (Grant IMAMCM/2021/1) and the Spanish Ministry of Science and Innovation (Grants RTI2018-093452-B-I00 and BES-2016-077380 funded by MCIN/AEI/10.13039/501100011033 and by ERDF A way of making Europe) for the financial support., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

pH modulates antibacterial activity of hydroxybenzaldehyde derivatives immobilized in chitosan films via reversible Schiff bases and its application to preserve freshly-squeezed juice

  • Heras-Mozos, Raquel
  • López-Carballo, Gracia
  • Hernández, Rebeca
  • Gavara, Rafael
  • Hernández Muñoz, Pilar
Antimicrobial food grade hydroxybenzaldehyde derivatives were immobilized on the surface of chitosan films by means of reversible Schiff bases. Spectroscopy and elemental analysis evidenced the different ability of the aldehydes to form Schiff bases with chitosan. Chitosan films modified with Schiff bases of aldehydes exerted antimicrobial properties against E. coli under mild acidic environments. The efficacy of the films lied on the reversibility of synthetized imine bonds and release of the aldehydes which was promoted in mildly acid aqueous solutions. Besides acidity, imine bond reversibility depended on the chemical structure of the aldehyde covalently bonded. Films carrying salicylaldehyde presented the highest in vitro antimicrobial performance and thus, they were chosen to evaluate their effectivity in inhibiting E. coli proliferation in freshly-squeezed carrot-orange juice. Films were successfully activated by the acid environment of the juice and reduced the population of the inoculated pathogen. Salicylaldehyde migrated to the juice did not exert toxic effects on Caco-2 cells., The authors acknowledge the financial support of the Spanish Ministry of Science and Innovation (Grants RTI2018-093452-B-I00, MAT2017-83014-C2-2P and BES-2016-077380 funded by MCIN/AEI/ 10.13039/501100011033 and by ERDF A way of making Europe). PHM, RH and RG are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast) from the Spanish National Research Council (CSIC) (CSIC program for the Spanish Recovery, Transformation and Resilience Plan funded by the Recovery and Resilience Facility of the European Union, established by the Regulation (EU) 2020/2094)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Development of antifungal biopolymers based on dynamic imines as responsive release systems for the postharvest preservation of blackberry fruit

  • Heras-Mozos, Raquel
  • Gavara, Rafael
  • Hernández-Muñoz, Pilar
This study describes the synthesis and reversibility of Schiff bases from chitosan and bioactive compounds, and their application in the antifungal packaging of fruit. Imine bonds between primary amine groups of chitosan and carbonyl groups of antifungal aldehydes were synthesised and their reversibility was assayed in an aqueous medium under different acidic conditions. The mechanism of action of the dynamers is based on the hydrolysis of imine bond and the release of the active agent. The new films were effective at inhibiting the growth of Penicillium expansum and Botrytis cinerea, and their effectivity depended on the degree of hydrolysis achieved which was greater when the bonds were hydrolysed in a mild acidic medium. A double bottom cylindrical tray was used for the responsive antimicrobial packaging of blackberries. The package extended shelf-life of berries from 3 to 12 days without causing phytotoxic effects on the fruit being safe for human consumption., The authors want to thank the Spanish Ministry of Science and Innovation for financial support (project RTI2018-093452-B-I00 and R. Heras’s predoctoral contract)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Chitosan films as pH-responsive sustained release systems of naturally occurring antifungal volatile compounds

  • Heras-Mozos, Raquel
  • Gavara, Rafael
  • Hernández-Muñoz, Pilar
Reversible imine bonds have been used as a strategy to develop pH-dependent antifungal systems based on grafting benzaldehyde and citral onto the surface of chitosan films. Formation of imine bonds was confirmed by ATR-FTIR and XPS. Aldehyde unit incorporation respect to glucosamine units of chitosan polymer was estimated by elemental analysis. The rate and extent of imine bond hydrolysis depended on the pH of the media and the chemical structure of the aldehyde. The release of the aldehydes was monitored by gas chromatography observing acidic media favours the release. Imine bond obtained from benzaldehyde was more prone to be hydrolysed than citral. Chitosan films grafted with benzaldehyde and triggered at acidic pH controlled in vitro growth of common fruit and vegetable spoilage and pathogenic fungi. The films developed could be applied in the design of food packages intended to prevent postharvest fungal spoilage., The authors want to thank the Spanish Ministry of Science and Innovation for financial support (project RTI2018-093452-B-I00 and R. Heras's predoctoral contract). P. H-M and RG are members of the Interdisciplinary Platform for Sustainable Plastics towards a Circular Economy (SusPlast) from the Spanish National Research Council (CSIC)., Peer reviewed