Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Effects of essential oils and silver nanoparticles on nanocellulose-stabilized paper-based packaging

  • Sam, Samanta
  • Aguado, Roberto J.
  • Saguer Hom, Elena
  • Alcalà Vilavella, Manel
  • Fiol Santaló, Núria
  • Delgado Aguilar, Marc
Increasing environmental awareness and the demand for safe food products have intensified interest in active packaging systems, especially those incorporating natural antioxidant and antimicrobial agents to achieve sustainable food protection. This research endeavors to elucidate the synergistic effect of in-situ synthesized silver nanoparticles (Ag NPs) through green chemical reduction within a cellulose nanofiber (CNF) matrix with cardamon and cinnamon essential oils (EOs), aiming at enhancing the antioxidant and antimicrobial functionality of active paper-based packaging. Size and zeta potential of synthesized Ag NPs were 8.63 ± 0.69 nm and − 11.36 ± 0.25 mV, respectively, while for the Pickering emulsions it ranged from − 35 to − 40 mV, indicating the formation of stable dispersions. Emulsions displayed shear-thinning behavior. Optical microscopy confirmed the formation of stable, uniformly dispersed, small spherical oil droplets, with no evidence of creaming or coalescence. Emulsion coated papers, showed improved antioxidant activity and exhibited around 74.69 ± 3.09% of DPPH free radical scavenging efficiency in 95% ethanol, mainly due to the cardamom and cinnamon EOs. Additionally, the Ag NP-functionalized TO-CNFs showed improved EO encapsulation and higher DPPH radical scavenging compared to bare TO-CNFs. They exhibited up to 99% antimicrobial activity against Listeria monocytogenes and Escherichia coli and also against the fungus Aspergillus niger, which was mainly due to the synergistic action between Ag NPs and EOs in the system. Migration of active components from EOs and silver into food simulants A, B, and C remained below EU regulatory limits, demonstrating its potential for active food packaging application, Authors wish to acknowledge the Spanish Ministry of Science and Innovation for the financial support to the project NextPack (PID2021-124766OA-I00). Marc Delgado-Aguilar and Quim Tarrés are Serra Húnter Fellows. Authors wish to acknowledge Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Quaternary ammonium salt ionic liquids as catalysts in the cycloaddition reaction of epoxides with CO2 in the presence of hydrogen bond donors

  • Ortiz Garcia, Thalia Thalia
  • Moshfeghnia, Mahrou
  • Maqsood, Rabab
  • Rodríguez Pizarro, Montserrat
  • Tarrés Farrés, Joaquim Agustí
  • Pla Quintana, Anna
  • D'Elia, Valerio
  • Posada-Pérez, Sergio
  • Poater Teixidor, Albert
The cycloaddition of CO<inf>2</inf> to epoxides offers a highly atom-economic route to cyclic carbonates, but its efficiency under mild conditions remains limited by the activation of the epoxide ring. Here we combine experimentally derived trends and density functional theory (DFT) calculations to elucidate the role of hydroxy-functionalized quaternary ammonium salts and biobased hydrogen bond donors (HBDs) in this process. Using the N-ethyl-N-(2-hydroxyethyl) mixed-substituted ammonium bromides, NEt₄₋ₓ(HE)ₓBr series (HE = 2-hydroxyethyl), and representative HBDs (alcohols, glycols and cellulose fragments), we analyse and characterize the reaction mechanism, and the data confirm that the rate-determining step is the epoxide ring opening for ionic liquids, whereas for most HBD systems the carbonate ring closure becomes competitive. Moderate hydroxyl content maximizes catalytic activity, while excess hydroxyl groups or bulky substituents induce self-association and reduce performance. In a predictive catalysis exercise, substituting Br<sup>−</sup> with Cl<sup>−</sup> or I<sup>−</sup> preserves the overall trends. These computational insights provide general guidelines for the rational design of synergistic ionic liquid/HBD catalysts for sustainable CO<inf>2</inf> valorization, highlighting fundamental design principles rather than merely evaluating catalytic activity., A.P.-Q., Q.T. and A.P. are Serra Húnter Fellows. We thank the Spanish Ministerio de Ciencia y Universidades (MICIU) for projects PID2021-124766OA-I00, PID2024-155989NB-I00 and PID2023- 146849NBI00/MICIU/AEI/10.13039/501100011033/FEDER, UE, RED2022-134939-T, and the Generalitat de Catalunya for project 2021SGR623. We thank the support from BSC supercomputing facilities (QH-2025-2-0006, QH-2025-3-0020)., 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Active food packaging based on Pickering emulsions of essential oils stabilized by cationic cellulose nanofibers

  • Sam, Samanta
  • Aguado, Roberto J.
  • Saguer Hom, Elena
  • Fiol Santaló, Núria
  • Delgado Aguilar, Marc
  • Tarrés Farrés, Joaquim Agustí
Due to environmental concerns about non-biodegradability of conventional plastic packaging, there is a growing shift towards sustainable alternatives such as paper-based food packaging. In this context, Pickering emulsions have been developed, incorporating clove and thyme essential oils and stabilized by cationic cellulose nanofibers (CCNFs). This study evaluates the antioxidant and antimicrobial performance of emulsion-coated paper based on varying concentration of constituents. The innovative aspect of this research lies in the use of CCNFs as bio-based stabilizing agent. Their high aspect ratio and surface charge inhibit droplet coalescence and enhance emulsion stability. The stable emulsions demonstrated a fine droplet size and high zeta potential. They exhibited potential antioxidant activity, achieving 92 % of 2,2-diphenyl-1-picrylhydrazyl free radical scavenging. Coated paper exhibited significant antibacterial efficacy, inhibiting Listeria monocytogenes by 99.99 % and Escherichia coli by 99 %, alongside notable antifungal activity against Aspergillus niger. Increasing CCNFs content, improved the barrier properties and functional performance of the coated substrate. Specific migration into food simulants remained minimal, confirming the suitability of material for food contact application. FESEM analysis showed that the emulsion effectively and partially occluded the pores of the paper. This developed coating system demonstrates potential for active applications, offering an eco-friendly alternative to traditional packaging materials, Authors wish to acknowledge the Spanish Ministry of Science and Innovation for the financial support to the project NextPack (PID2021-124766OA-I00). Marc Delgado-Aguilar and Quim Tarrés are Serra Húnter Fellows. Samanta Sam is grateful for the support of the predoctoral program AGAUR-FI grants (2023 FI-3 00065) Joan Oró from the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat de Catalunya and the European Social Fund Plus. Open Access funding was provided thanks to the CRUE-CSIC agreement with Elsevier, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

AgNP–Zeolite integrated into cellulose nanofibers for enhanced ethylene scavenging performance

  • Sam, Samanta
  • Aguado, Roberto J.
  • Fiol Santaló, Núria
  • Saguer Hom, Elena
  • Bastida, Gabriela A.
  • Delgado Aguilar, Marc
  • Tarrés Farrés, Joaquim Agustí
Postharvest accumulation of ethylene accelerates ripening and senescence, significantly reducing the shelf-life. This work developed a multifunctional ethylene-scavenging system utilizing silver nanoparticle (Ag NP)-functionalized TEMPO-oxidized cellulose nanofibers (TCNFs) combined with varying the zeolite loadings. A dual-side coating strategy was employed: one side of the paper substrate was coated with one to three layers of alginate to enhance barrier performance, while the opposite side was coated with Ag NP-functionalized TCNFs containing 1–20% zeolite to provide ethylene scavenging and antibacterial properties. In-situ incorporation of Ag NPs into TCNF matrix improved suspension stability, reflected by an increase in ζ-potential to −31.3 ± 0.46 mV. Morphology and distribution of nanoparticles were analyzed using STEM and TEM techniques. SPR band at 424.13 nm and XRD reflections characteristics of face-centered cubic silver confirmed the formation of metallic Ag0. FTIR analysis confirmed the incorporation of zeolite into the Ag NP–TCNF network. The paper coated with 20% zeolite in the Ag NP–functionalized TCNFs exhibited the highest ethylene scavenging capacity, removing 0.8 ± 0.06 μL of ethylene (at 60 bar) per gram of coated paper, equivalent to 13.13 μL per gram of zeolite, corresponding to 50.05 μL/L ethylene elimination. The coated papers displayed significant improvements in barrier performance: grease resistance increased from a kit value of 1 (uncoated) to 12, the water vapor transmission rate decreased from ⁓1400 to 350 g·m−2·day−1, and air resistance rose from 28 to ⁓1800 Gurley seconds. They exhibited pronounced antibacterial activity of ⁓ 99% against Bacillus subtilis and Escherichia coli, The authors gratefully acknowledge the Spanish Ministry of Science and Innovation for its financial support of the NextPack project (PID2021-124766OA-I00). . Samanta Sam is grateful for the support of the predoctoral program AGAUR-FI grants (2023 FI-3 00065) Joan Oró from the Secretariat of Universities and Research of the Department of Research and Universities of the Generalitat de Catalunya and the European Social Fund Plus. Marc Delgado-Aguilar and Quim Tarrés are Serra Húnter Fellows. Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

The role of electrostatic interactions of anionic and cationic cellulose derivatives for industrial applications: A critical review

  • Aguado, Roberto J.
  • Mazega Fontes, André
  • Tarrés Farrés, Joaquim Agustí
  • Aguilar, Marc
Some of the most popular cellulose derivatives exhibit charged functional groups, either cationic (generally, quaternary ammonium moieties) or anionic (most typically, carboxylate groups). Noticeably, the second most successful cellulosic derivative in the world, in terms of market share, is the salt of a negatively charged polymer: sodium carboxymethyl cellulose. However, many of the applications that have long been proposed by researchers have never proven feasible on a large scale. In light of this, the present review critically discusses the current and potential applications of anionic and cationic cellulose derivatives: (i) coagulation-flocculation or direct flocculation processes, for which the limited molecular weight of cellulose derivatives is a key limitation; (ii) thickening and rheology modification in general, where polymer-water interactions play a major role; (iii) stabilization of colloids or emulsions, in such way that the repulsive electrostatic forces prevent aggregation unlike coagulation-flocculation; (iv) adsorption of cations by anionic cellulose, of anions by cationic cellulose, and adsorption mediated by other mechanisms; (v) encapsulation of bioactive compounds for drug delivery or other purposes; (vi) filtration by means of cellulose-based membranes, and (vii) production of antimicrobial materials by exploiting the interactions between cationic cellulose and the phospholipid bilayer of microorganisms. We highlight the recent trends and, closely related to them, the knowledge gaps in the literature on anionic and cationic derivatives. For instance, the survey remarks on the increasing popularity of anionic or cationic nanocellulose (generally, as nanofibers or nanocrystals), progressively outweighing both conventional fibers and soluble derivatives, Authors wish to acknowledge the Spanish Ministry of Science and Innovation for the financial support to the project NextPack (PID2021-124766OA-I00). André Mazega Fontes received funding for his PhD thesis by the University of Girona and Banco Santander (PhD grant IFUdG2020), Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Antioxidant and antimicrobial emulsions with amphiphilic olive extract, nanocellulose-stabilized thyme oil and common salts for active paper-based packaging

  • Aguado, Roberto J.
  • Saguer Hom, Elena
  • Tarrés Farrés, Joaquim Agustí
  • Fiol Santaló, Núria
  • Delgado Aguilar, Marc
Anionic cellulose nanofibers (CNFs) were used to stabilize emulsions that combined water-soluble (and oil-soluble), strongly antioxidant extracts with a water-immiscible, notably antimicrobial essential oil. Specifically, the radical scavenging activity was primarily provided by aqueous extracts from olive fruit (Olea europaea L.), while the antimicrobial effects owed eminently to thyme oil (Thymus vulgaris L.). The resulting emulsions were highly viscous at low shear rate (4.4 Pa·s) and displayed yield stress. The addition of edible salts decreased the yield stress, the apparent viscosity and the droplet size, to the detriment of stability at ionic strengths above 50 mM. Once characterized, the antioxidant and antimicrobial emulsions were applied on packaging-grade paper. Coated paper sheets inhibited the growth of Listeria monocytogenes, a common foodborne pathogen, and acted as antioxidant emitters. In this sense, the release to food simulants A (ethanol 10 vol%), B (acetic acid 3 wt%), and C (ethanol 20 vol%) was assessed. A 24-hour exposure of 0.01 m2 of coated paper to 0.1 L of these hydrophilic simulants achieved inhibition levels of the 2,2-diphenyl-1-picrylhydrazyl radical (DPPH) in the 15-29 % range. All considered, the bioactive properties of thyme essential oil towards lipophilic food products can be complemented with the antioxidant activity of aqueous olive extracts towards hydrophilic systems, resulting in a versatile combination for active food, Authors wish to acknowledge the Spanish Ministry of Science and Innovation for the financial support to the project NextPack (PID2021-124766OA-I00), Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

In-situ synthesis and binding of silver nanoparticles to dialdehyde and carboxylated cellulose nanofibrils, and active packaging therewith

  • Aouay, Mohamed
  • Aguado, Roberto J.
  • Bayés, Genís
  • Fiol Santaló, Núria
  • Putaux, Jean-Luc
  • Boufi, Sami
  • Delgado Aguilar, Marc
The present work reveals the potential application of dialdehyde and carboxylated nanocellulose for the in-situ reduction of Ag+ and immobilization as silver nanoparticles (AgNPs) on cellulose surfaces. Tollens’ reagent (Ag(NH3)2OH) at concentrations ranging from 5·10–3 to 10–1 M was incorporated in both dialdehyde cellulose (DAC) and dialdehyde-modified TEMPO-oxidized cellulose nanofibers (DA-TOCNFs). The results showed that DA-TOCNFs facilitated faster reduction of Ag+ and effective immobilization of AgNPs on the nanocellulose surface. The resulting suspensions exhibited stability and demonstrated strong antimicrobial activity against Bacillus subtilis when coated on paper surfaces. Importantly, the coated papers did not show significant silver migration to food simulants B (3 vol% acetic acid) and D1 (ethanol/water mixture, 50 vol%), indicating the potential of these suspensions for active food packaging. The advantages of using DA-TOCNFs over DAC were attributed to their higher cationic demand and ζ-potential, resulting in a higher density of binding sites. Moreover, the charged and entangled network of DA-TOCNFs allowed for the individualization of AgNPs, unlike DAC, where some agglomerations were observed. Overall, this study presents an improved single-step process for the synthesis of AgNPs on nanocellulose surfaces, highlighting their potential for safe and high-performance applications in food packaging. Paper sheets coated with nanocellulose/AgNPs suspensions fully inhibited the growth of B. subtilis, at least for one month after coating, and caused damage to their cell membranes. This research provides a one-pot facile route to fabricating hybrid nanocellulose/AgNPs systems, stable in water, and may be used directly as a coating layer for board and paper active packaging with little or even undetectable release of Ag, The authors wish to acknowledge the Spanish Ministry of Science and Innovation for the financial support to the project NextPack (PID2021-124766OA-I00), the Government of Catalonia for the Industrial Doctorate project 2021 DI 13, which partially funds the PhD project of Genís Bayés, as well as the NanoBio-ICMG platform (UAR 2607, Grenoble) for granting access to the Electron Microscopy Facility. Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Innovative system based on natural polyelectrolyte complex and cellulose micro/nanofibers to improve drainability and properties of recycled paper

  • Bastida, Gabriela A.
  • Zanuttini, Miguel A.
  • Tarrés Farrés, Joaquim Agustí
  • Fiol Santaló, Núria
  • Delgado Aguilar, Marc
  • Galván, María V.
In this work, the efficiency of a polyelectrolyte complex (PEC) to retain different cellulose micro/nanofibers (CMNFs) during paper formation and to improve the physical properties of recycled unbleached fiber paper was analyzed. CMNFs were obtained from a commercial bleached eucalyptus pulp (BEP) using a PFI refiner followed by a chemical treatment with oxalic acid at two different concentrations. Finally, the pulp was fibrillated using a high-pressure homogenizer at three different intensities. The PEC was formed by addition of the xylan (Xyl) solution on chitosan (CH) solution with a Xyl/CH mass ratio of 80/20. The required dosages of PEC solution to neutralize the charges of different nanocellulose fractions were determined by ζ-potential measurements, and the CMNF retentions on recycled unbleached fibers were evaluated in a Britt Dynamic Drainage Jar. The results showed that the maximum retention was obtained when the neutral PEC-CMNF system was added to pulp. Besides, a significant decrease on °SR was observed when PEC and PEC-CMNF systems were added to the untreated pulp, limiting the negative effects of nanocellulose addition on pulp drainability. The incorporation of PEC-CMNF systems to the handsheets increased the tensile index (up to 28%), Mullen index (up to 40%) and internal bonding (up to 255%). Finally, the compressive strength of the handsheets, namely SCT and CMT, increased up to 30 and 70%, respectively. These simultaneous improvement on drainability and mechanical properties makes the proposed PEC-CMNF system a promising solution for the production of packaging paper, The present work has been funded by: (a) Agencia I + D + i (PICT 2018 Nº 4410 and PICT 2019 N◦ 03246); (b) ASaCTeI Santa Fe IO 2018 Nº 0299; (c) CAI + D 2020 PI, Tipo II-N◦ 50620190100135LI; (d) CONICET; (e) RED CYTED NANOCELIA (Scholarship); (f) Spanish Ministry of Science and Innovation to the project CON-FUTURO-ES (PID2020-113850RB-C22); (g) Spanish Ministry of Science and Innovation to the project NextPack (PID2021-124766OA-I00), Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Stabilization of Beeswax-In-Water Dispersions Using Anionic Cellulose Nanofibers and Their Application in Paper Coating

  • Bayés, Genís
  • Aguado, Roberto J.
  • Tarrés Farrés, Joaquim Agustí
  • Planella, Jaume
  • Aguilar, Marc
Beeswax is a bio-sourced, renewable, and even edible material that stands as a convincing option to provide paper-based food packaging with moisture resistance. Nonetheless, the difficulty of dispersing it in water limits its applicability. This work uses oxidized, negatively charged cellulose nanofibers along with glycerol to stabilize beeswax-in-water emulsions above the melting point of the wax. The synergistic effects of nanocellulose and glycerol granted the stability of the dispersion even when it cooled down, but only if the concentration of nanofibers was high enough. This required concentration (0.6–0.9 wt%) depended on the degree of oxidation of the cellulose nanofibers. Rheological hindrance was essential to prevent the buoyancy of beeswax particles, while the presence of glycerol prevented excessive aggregation. The mixtures had yield stress and showed pseudoplastic behavior at a high enough shear rate, with their apparent viscosity being positively influenced by the surface charge density of the nanofibers. When applied to packaging paper, the nanocellulose-stabilized beeswax suspensions not only enhanced its barrier properties towards liquid water (reaching a contact angle of 96°) and water vapor (<100 g m−2 d−1), but also to grease (Kit rating: 5) and airflow (>1400 Gurley s). While falling short of polyethylene-coated paper, this overall improvement, attained using only one layer of a biobased coating suspension, should be understood as a step towards replacing synthetic waxes and plastic laminates, This research was funded by the Spanish Ministry of Science and Innovation, project NextPack (PID2021-124766OA-I00), and the Department of Research and Universities from the Government of Catalonia, Industrial Doctorates (2021 DI 013), 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving the Barrier Properties of Paper to Moisture, Air, and Grease with Nanocellulose-Based Coating Suspensions

  • Mazega Fontes, André
  • Tarrés Farrés, Joaquim Agustí
  • Aguado, Roberto J.
  • Pèlach Serra, Maria Àngels
  • Mutjé Pujol, Pere
  • Ferreira, Paulo J. T.
  • Aguilar, Marc
Food packaging manufacturers often resort to lamination, typically with materials which are neither non-biodegradable nor biobased polymers, to confer barrier properties to paper and cardboard. The present work considers a greener solution: enhancing paper’s resistance to moisture, grease, and air by aqueous coating suspensions. For hydrophobization, a combined approach between nanocellulose and common esterifying agents was considered, but the water vapor transmission rate (WVTR) remained excessively high for the goal of wrapping moisture-sensitive products (>600 g m−2 d−1). Nonetheless, oil-repellant surfaces were effectively obtained with nanocellulose, illite, sodium alginate, and/or poly(vinyl alcohol) (PVA), reaching Kit ratings up to 11. Regarding air resistance, mineral-rich coatings attained values above 1000 Gurley s. In light of these results, nanocellulose, minerals, PVA, pullulan, alginate, and a non-ionic surfactant were combined for multi-purpose coating formulations. It is hypothesized that these materials decrease porosity while complementing each other’s flaws, e.g., PVA succeeds at decreasing porosity but has low dimensional stability. As an example, a suspension mostly constituted by nanocellulose, sizing agents, minerals and PVA yielded a WVTR of roughly 100 g m−2 d−1, a Kit rating of 12, and an air resistance above 300 s/100 mL. This indicates that multi-purpose coatings can be satisfactorily incorporated into paper structures for food packaging applications, although not as the food contact layer, The authors wish to acknowledge the financial support of the Spanish Ministry of Science and Innovation to the projects CON‐FUTURO‐ES (PID2020‐113850RB‐C22) and NextPack (PID2021‐124766OA‐I00)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Polymerization of aniline in nanocellulose-stabilized systems, leading to smart coatings applied to paper-based food packaging

  • Aguado, Roberto J.
  • Bastida, Gabriela A.
  • Fiol Santaló, Núria
  • Tarrés Farrés, Joaquim
  • Pèlach Serra, Maria Àngels
  • Delgado Aguilar, Marc
Nanocellulose-stabilized Pickering emulsions typically utilize oils that display high interfacial tension with water. For the first time, this work describes the stabilization of aniline (12 wt.%)-in-water emulsions, where the interfacial tension lies below 6 mN/m. The stabilizing agent consisted of oxidized cellulose nanofibrils (CNFs). While the density of aniline, alike to that of water, granted high kinetic stability with 0.18 wt.% CNFs (3 days), phase separation was avoided for at least 30 days if CNF concentration was 0.28 wt.% or higher. Easily dispersible polyaniline was attained by adding orthophosphoric acid (doping), sodium dihydrogen orthophosphate (pH adjusting), and ammonium persulfate (initiator) to a previously prepared aniline-in-water emulsion (dispersion polymerization). The resulting dispersions did not suffer from creaming or sedimentation. Polyaniline samples exhibited average molecular weights below 100 kDa. They were hardly electroconductive and possessed relatively low thermal stability, but they were chromogenic. Owing to the latter feature and to the suitable rheological behavior of the suspensions, packaging paper was coated on one side with those samples to produce visually responsive sheets. When their uncoated side was exposed to gaseous ammonia, volatile amines, or spoiled fish (cod, hake, and salmon), their green-colored surface (emeraldine salt) turned blue (emeraldine base). Electron microscopy assays ruled out diffusion of polyaniline from the coated side to the exposed side. Overall, the strategy presented here implies several innovative advantages: allowing for the high-concentration polymerization of aniline, keeping the polymer dispersed, and producing suspensions that can be readily applied to the manufacture of smart food packaging., Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature. This research was funded by the Spanish Ministry of Science and Innovation, projects NextPack (PID2021-124766OA-I00) and NEST (PID2024-157908OB-I00). Moreover, Open Access funding was provided thanks to the CRUE-CSIC agreement with Springer, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lignin nanoparticles as Pickering stabilizers: emulsion engineering through physicochemical design and meta-analysis

  • Marquez, Ronald
  • Aguado, Roberto J.
  • Tarrés Farrés, Joaquim Agustí
  • Tolosa, Laura
  • Tardy, Blaise L.
  • Rojas, Orlando J.
  • Hubbe, Martin A.
  • Delgado Aguilar, Marc
This review systematically examines the principal physicochemical parameters that govern the formation, stability, and properties of Pickering emulsions stabilized by lignin nanoparticles (LNPs). We consider the role of particle size, charge and concentration, oil volume fraction, as well as emulsification variables (pH and shearing method). We demonstrate the broad applicability of fundamental physical chemistry principles in explaining the long-term stability of LNP-stabilized Pickering emulsions. LNPs with diameters of 25–50 nm, at concentrations between 0.2 and 2 wt%, generally yield emulsions stable for over six months. This suggests that rapid interfacial coverage by smaller particles, facilitated by high-energy emulsification, is critical for preventing initial coalescence. Such emulsions are generally more stable at acidic to neutral pH (pH 3–7). In addition, more negative LNP zeta potentials (up to −64 mV) correlate with enhanced colloidal stability due to the electrostatic repulsion between oil droplets. Furthermore, LNP modification such as acetylation and polymer grafting can significantly enhance emulsion stability by balancing surface wettability (hydrophilicity/hydrophobicity) and interfacial activity. A meta-analysis and support vector regressor with Bayesian optimization and eXplainable artificial intelligence (AI) analysis confirmed high-energy emulsification (ultrasonication, high-shear mixing), pH, and packing parameter (LNP<inf>size</inf>/LNP<inf>conc</inf> ratio) as the main features that can influence the formulation of emulsions and lead to smaller droplets and larger lifetimes. Finally, we propose heuristics to tailor LNP-stabilized Pickering emulsions that require stability and functionality, including those used in agriculture and crop protection, food, nutraceuticals, stimuli-responsive and energy systems, as well as coatings., Authors wish to acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities to the project NextPack (PID2021- 124766OA-I00). Marc Delgado-Aguilar and Quim Tarrés are Serra Húnter Fellows. B.L.T. acknowledges funding from Khalifa University of Science and Technology (KUST) FSU-2022-021 project code: 8474000438. O.J.R. acknowledges the Canada Excellence Research Chair Program (Grant No. CERC-2018-00006) and the BC Ministry of Forests. M.A.H. acknowledges the Buckman Foundation, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Antioxidant coatings with selenium nanoparticles, stabilized by chitosan and nanocellulose, for active paper packaging

  • Sam, Samanta
  • Aguado, Roberto J.
  • Fiol Santaló, Núria
  • Bastida, Gabriela A.
  • Aguilar, Marc
  • Tarrés Farrés, Joaquim Agustí
Inclou una correcció de l'article publicat a "International Journal of Biological Macromolecules", 2025 agost, vol. 319, art. num.146244, This study develops active food packaging coatings using antioxidant selenium nanoparticles (Se NPs), synthesized via green chemical reduction with cationic cellulose nanofibers (CCNFs) and chitosan (CS) as stabilizers. Se NPs were incorporated into either TEMPO-oxidized or enzymatically hydrolyzed (EH) cellulose nanofibers (CNFs) using blending and in-situ synthesis methods. Se NP incorporated CNF suspensions were coated onto liners with one or two alginate layers, and the best formulation was identified based on CNF type and incorporation method. Antioxidant performance, assessed via DPPH assay, showed 98–99 % radical inhibition in coatings with 10 % Se NP-incorporated CNFs. Antimicrobial activity was less remarkable, but inhibitions of E. coli growth of up to ∼65 % were found for coated papers. Barrier properties were evaluated at different Se NP concentrations and alginate layer numbers. The highest kit value (12) was achieved with two layers of alginate and two layers of 10 % CS- or CCNF-stabilized Se NP-incorporated TEMPO CNFs (STC) via in-situ synthesis. Coated liners also reached air resistance values of ∼2000 Gurley seconds and water vapor transmission rates of ∼150–200 g/m2/day. FESEM imaging confirmed the synergistic effect of alginate and STC in reducing pore size, highlighting its potential for active food packaging, This research was received from the Spanish Ministry of Science and Innovation, project NextPack (PID2021-124766OA-I00). Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Pickering emulsions of thyme oil in water using oxidized cellulose nanofibers: Towards bio-based active packaging

  • Aguado, Roberto J.
  • Saguer Hom, Elena
  • Fiol Santaló, Núria
  • Tarrés Farrés, Joaquim Agustí
  • Aguilar, Marc
The antioxidant and antimicrobial properties of thyme essential oil (TEO) are useful for active food packaging, but its poor aqueous solubility restricts its applications. This work involves anionic cellulose nanofibers (CNFs) as the sole stabilizing agent for TEO-in-water emulsions, with oil concentrations ranging from 10 mL/L to 300 mL/L. A double mechanism was proposed: the adsorption of CNFs at oil/water interfaces restricted coalescence to a limited extent, while thickening (rheological stabilization) was required to avoid the buoyance of large droplets (>10 μm). Thickening effects comprised both higher viscosity (over 0.1 Pa·s at 10 s−1) and yield stress (approximately 0.9 Pa). Dilute emulsions had good film-forming capabilities, whereas concentrated emulsions were suitable for paper coating. Regarding antimicrobial activity, CNF-stabilized TEO-in-water emulsions successfully inhibited the growth of both Gram-negative (E. coli, S. typhimurium) and Gram-positive bacteria (L. monocytogenes). As for the antioxidant properties, approximately 50 mg of paper or 3–5 mg of film per mL of food simulant D1 were required to attain 50 % inhibition in radical scavenging tests. Nonetheless, despite the stability and the active properties of these bio-based hydrocolloids, providing this antioxidant and antimicrobial activity was incompatible with maintaining the organoleptic properties of the foodstuff unaltered, Authors wish to acknowledge the Spanish Ministry of Science and Innovation for the financial support to the project NextPack (PID2021-124766OA-I00), Open Access funding provided thanks to the CSUC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Advanced antimicrobial surfaces in cellulose-based food packaging

  • Marquez, Ronald
  • Aguado, Roberto J.
  • Barrios, Nelson
  • Arellano, Helena
  • Tolosa, Laura
  • Delgado Aguilar, Marc
This critical review provides a comprehensive framework for selecting engineered colloidal and nanostructured systems for cellulose-based food packaging. Meta-analysis was used as a methodological approach to categorize them according to antimicrobial agents, coating methods, and synergistic effects against a broad spectrum of microorganisms. The most frequent substrate is flexible packaging paper (35–70 g/m2, uncalendered), often intended for food wrapping. Among antimicrobial agents, chitosan-based coatings are a common choice—often combined with essential oils—being particularly effective against Gram-positive bacteria (e.g., Staphylococcus aureus, Listeria monocytogenes, Bacillus subtilis). This is attributed to electrostatic interactions between the polysaccharide's protonated –NH3+ groups and teichoic acids within bacterial cell walls. Inorganic metal nanoparticles, such as ZnO nanorods and Ag nanoparticles, are broadly effective by compromising the membranes of various foodborne pathogens—including Bacillus cereus and Pseudomonas aeruginosa. Terpenoid- or phenolic-rich essential oils—commonly delivered in emulsions or encapsulated in host-guest β-cyclodextrin complexes—inhibit the growth of yeasts and molds, besides some common bacteria when grafted onto bleached paper. Synergistic effects have been observed with complex coatings such as chitosan combined with CuONPs. Despite their promising performance, the widespread industrial adoption of cellulose-based active packaging in the food sector requires addressing not only antimicrobial activity, but also barrier properties and feasible methods to functionalize the paper surface (e.g., bar coating). These challenges, often overlooked, are critically assessed herein. All considered, further studies are required to address the challenges of cellulosic antimicrobial materials in a holistic manner to accelerate its large-scale implementation in the food sector, Authors also wish to acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities to the project NextPack (PID2021-124766OA-I00). Marc Delgado-Aguilar is a Serra Húnter Fellow, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Artificial Intelligence (AI)-Augmented “Living” Meta-Analyses toward Critical Thinking Engagement in Chemical Education and Research: A Case Study of Nanocellulose-Stabilized Pickering Emulsions

  • Marquez, Ronald
  • Tardy, Blaise L.
  • Aguado, Roberto J.
  • Signori-Iamin, Giovana
  • Argelagós, Esther
  • Delgado Aguilar, Marc
As research on sustainable and advanced materials accelerates (e.g., cellulose-based composites and functionalized nanomaterials), research output has expanded rapidly, increasing complexity and making it challenging for industrial and engineering chemistry researchers to maintain comprehensive, up-to-date data compilation and analysis. Therefore, traditional meta-analyses, even when attempting to adhere to systematic methodologies such as the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA), face challenges with manual data curation, risking oversights and impacting reproducibility in the face of such volume. Updated meta-analysis methodologies are necessary to critically assess advances and new technologies for the upscaling processes and innovation in the advanced materials field. To address this, we propose a novel framework for creating “living” meta-analyses augmented by artificial intelligence (AI). We explore these concepts via a tutorial case study on nanocellulose-stabilized Pickering emulsions, illustrating how the integration of AI-based extraction with bibliometric mapping reveals patterns, identifies research gaps, and enables the deployment of informed decisions for future research and accelerated product development in academia and industry. Integrating Large Language Models (LLMs), such as ChatGPT and Gemini, with bibliometric platforms (e.g., ACS CAS SciFinder, Scopus, Dimensions) and VOSviewer, allowed one to systematically curate and synthesize data from over 50 publications. The resulting interactive platform reveals complex relationships among nanocellulose properties (e.g., type, modification, concentration), processing conditions, and emulsion characteristics (e.g., droplet size, stability). The database and software are available at 10.5281/zenodo.15808694. We critically discuss the current limitations of LLMs in performing meta-analyses in the chemical engineering and advanced materials fields and emphasize the role of “human-in-the-loop” expertise in interpretation., Authors wish to acknowledge the financial support of the Spanish Ministry of Science, Innovation and Universities to the project NextPack (PID2021-124766OA-I00). Giovana Signori-Iamin received funding for her PhD thesis from the University of Girona (PhD grant IFUdG2023), Open Access funding provided thanks to the CRUE-CSIC agreement with ACS, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Impact of cellulose nanofibers on cellulose acetate membrane performance

  • Bastida, Gabriela A.
  • Aguado, Roberto J.
  • Galván, María V.
  • Zanuttini, Miguel A.
  • Aguilar, Marc
  • Tarrés Farrés, Joaquim Agustí
Membranes find applications across a wide spectrum of industries, including water treatment, energy production, and biomedicine. In this study, nonwoven membranes were fabricated using cellulose acetate (CA) as the primary component, with varying percentages of cellulose nanofibers (CNFs) embedded as reinforcement. These CNFs were prepared through an oxalic acid pretreatment (Oxalic-CNFs). Their incorporation into electrospun membranes represents an innovative approach, enhancing their mechanical properties for applications subjected to high loads and improving its functionalization capabilities. The impact of Oxalic-CNFs on membrane properties was investigated at nanofiber loadings ranging from 0 to 18 wt%. Membranes produced with 6 wt% Oxalic-CNF exhibited the superior physical and mechanical properties. This improvement can be attributed to the formation of threads with higher intrinsic strength, a reduction in pore size, and an increase in density. When higher percentages of CNFs were added, the membranes were not properly formed, because filaments were not continuous and the needle became clogged. The substructure of the membrane proved to be a critical factor for mechanical properties, with remarkable increases in tensile strength and elastic modulus (around 300%) when comparing 4–6 wt% Oxalic-CNF-loaded membranes to CA membranes, This research was funded by the Spanish Ministry of Science and Innovation, project NextPack (PID2021-124766OA-I00), Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Green synthesis and optimization of selenium nanoparticles using chitosan or cationic cellulose nanofibers

  • Sam, Samanta
  • Fiol Santaló, Núria
  • Aguado, Roberto J.
  • Saguer Hom, Elena
  • Carrasco, Félix
  • Aguilar, Marc
  • Tarrés Farrés, Joaquim Agustí
Spherical selenium nanoparticles (Se NPs) were synthesized by green chemical reduction method using biocompatible chitosan (CS) or as reported herein for the first time, cationic cellulose nanofibers (CCNFs) as stabilizers. CNFs were cationized using (3-chloro-2-hydroxypropyl) trimethylammonium chloride (CHPTAC), followed by high-pressure homogenization. The anionic demand of the CCNFs was found to be 2000 ± 2 µeq/g and the degree of substitution was 0.25 ± 0.01. The optimization of Se NP synthesis was done using response surface methodology with controlled composite design. Two response surface models were developed to optimize the size and stability of CS-Se NPs and CCNF-Se NPs. Concentrations of Na2SeO3, ascorbic acid, and CS or CCNFs were used as three variables, and their interaction was studied as a function of size and zeta potential. The results indicate that the variables fitted into the model and was validated using a combined contour plot of size and zeta potential. From the model, CS-Se NPs of size and zeta potential in the range between 10 and 70 nm and 30–40 mV were synthesized, while CCNF-Se NPs of size and zeta potential in the range between 50 and 85 nm and 30–35 mV were synthesized. EDX spectra confirmed elemental Se formation, and XRD pattern verified the presence of α-monoclinic Se crystallites. Additionally, the FTIR spectra confirmed the interaction between the stabilizing agent and Se NPs. Thus, CS- and CCNF-stabilized Se NPs were sustainably synthesized making them suitable for incorporation into CNFs and can be used as an active agent in food packaging application, This research was received from the Spanish Ministry of Science and Innovation, project NextPack (PID2021-124766OA-I00). Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature