Pasar al contenido principal

DESARROLLO DEL CONOCIMIENTO PARA EL FUTURO USO DE NANOCELULOSAS EN UNA INDUSTRIA DE PAPEL SOSTENIBLE Y COMPETITIVA EN ESPAÑA

PID2020-113850RB-C22

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2020
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 18
Encontrada(s) 1 página(s)

Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fit-for-Use Nanofibrillated Cellulose from Recovered Paper

  • Balea, Ana
  • Monte, M. Concepcion
  • Fuente González, Elena de la
  • Sanchez-Salvador, José Luis
  • Tarrés Farrés, Joaquim Agustí
  • Mutjé Pujol, Pere
  • Delgado Aguilar, Marc
  • Negro Álvarez, Carlos
The cost-effective implementation of nanofibrillated cellulose (CNF) at industrial scale requires optimizing the quality of the nanofibers according to their final application. Therefore, a portfolio of CNFs with different qualities is necessary, as well as further knowledge about how to obtain each of the main qualities. This paper presents the influence of various production techniques on the morphological characteristics and properties of CNFs produced from a mixture of recycled fibers. Five different pretreatments have been investigated: a mechanical pretreatment (PFI refining), two enzymatic hydrolysis strategies, and TEMPO-mediated oxidation under two different NaClO concentrations. For each pretreatment, five high-pressure homogenization (HPH) conditions have been considered. Our results show that the pretreatment determines the yield and the potential of HPH to enhance fibrillation and, therefore, the final CNF properties. These results enable one to select the most effective production method with the highest yield of produced CNFs from recovered paper for the desired CNF quality in diverse applications, The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation to the projects CTQ20217-85654-C2-1-R and CTQ2017-85654-C2-2-R (NANOPROSOST) and PID2020-113850RB-C21 and PID2020-113850RB-C22 (CON-FUTURO-ES) and the Community of Madrid (project S2018/EMT-4459 “RETOPROSOST2-CM”), 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electrospray deposition of cellulose nanofibers on paper: overcoming the limitations of conventional coating

  • Tarrés Farrés, Joaquim Agustí
  • Aguado, Roberto J.
  • Pèlach Serra, Maria Àngels
  • Mutjé Pujol, Pere
  • Aguilar, Marc
While the potential of cellulose nanofibers to enhance the mechanical and barrier properties of paper is well-known, there are many uncertainties with respect to how to apply them. In this study, we use not only bulk addition of micro-/nanofibers and bar coating with oxidized nanofibers, but also a combination of these and, as a novel element, electrospray deposition of nanofiber dispersions. Characterization involved testing the strength of uncoated and coated paper sheets, their resistance to air flow, their Bendtsen roughness, and their apparent density, plus visualization of their surface and cross-sections by scanning electron microscopy. As expected, bulk addition to the unrefined pulp was sufficient to attain substantial strengthening, but this enhancement was limited to approximately 124%. Following this, surface addition by bar coating improved air resistance, but not strength, since, as applying nanocellulose at high consistency was technically unfeasible, this was performed several times with detrimental drying stages in between. However, replacing bar coating with electrospraying helped us overcome these apparent limitations, producing enhancements in both barrier and tensile properties. It is concluded that electrosprayed nanofibers, owing to their uniform deposition and favorable interactions, operate as an effective binder between fibers (and/or fines), This research was funded by the Spanish Ministry of Science and Innovation, and the Spanish Ministry of Economy and Competitiveness, with the grant numbers PID2020-113850RB-C22 and CTQ2017-85654-C2-1-R, respectively
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Emulsions, dipsticks and membranes based on oxalic acid-treated nanocellulose for the detection of aqueous and gaseous HgCl2

  • Bastida, Gabriela A.
  • Aguado, Roberto J.
  • Fiol Santaló, Núria
  • Aguilar, Marc
  • Zanuttini, Miguel A.
  • Galván, María V.
  • Tarrés Farrés, Joaquim Agustí
Although cellulosic materials have been used as stabilizing agents for oil-in-water emulsions since the 1980s, their properties and the underlying mechanism are not universal regardless of the dispersed phase or of the treatments on cellulose. One case of unconventional organic phase is acetic acid-containing chloroform, which is known to be a good solvent system for the preservation of dithizone. In turn, dithizone is a long-known chromogenic reagent for the colorimetric detection of HgCl2. However, its usefulness is limited by its fast degradation in polar solvents. For instance, its dissolution in ethanol and the subsequent impregnation of paper strips allowed to quantify aqueous HgCl2 reliably and quickly (5.4 – 27 mg L–1), but only if they were used along the first 24 h after dip coating. Furthermore, those strips could not be used for sublimated HgCl2. The dithizone/chloroform-in-water emulsions presented in this work overcame these limitations. We opted for oxalic acid-treated cellulose nanofibers (ox-CNFs) as stabilizer, aiming at a proper balance between amphiphilic character and electrostatic repulsion. In this sense, ox-CNFs attained good gel-forming ability with a low content of carboxylate groups. The minimum ox-CNF concentration required was 0.35 wt%, regardless of the proportion of chloroform. This consistency implied yield stress values above 0.7 Pa. Nanocellulose also provided film-forming capabilities, which were exploited to produce visually responsive dipsticks and membranes. While quantification and reproducibility were hampered by the increase in the complexity of the system, dithizone/ox-CNF films were still a valid option for HgCl2 detection, outperforming solution coating in terms of stability, blank signal, and selectivity, This research was funded by the Spanish Ministry of Science and Innovation, project CON-FUTURO-ES (PID2020-113850RB-C22). Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Lignin-Containing Cellulose Nanofibrils from TEMPO-Mediated Oxidation of Date Palm Waste: Preparation, Characterization, and Reinforcing Potential

  • Najahi, Amira
  • Tarrés Farrés, Joaquim Agustí
  • Mutjé Pujol, Pere
  • Delgado Aguilar, Marc
  • Putaux, Jean-Luc
  • Boufi, Sami
Lignin-containing cellulose nanofibrils (LCNFs) have emerged as a new class of nanocelluloses where the presence of residual lignin is expected to impart additional attributes such as hydrophobicity or UV-absorption. In the present work, LCNFs with a lignin content between 7 and 15 wt% were prepared via a TEMPO-mediated oxidation as chemical pretreatment followed by high-pressure homogenization. The impact of the carboxyl content (CC) on the properties of the resulting LCNF gel, in terms of lignin content, colloidal properties, morphology, crystallinity, and thermal stability, were investigated. It was found that lignin content was significantly decreased at increasing CC. In addition, CC had a positive effect on colloidal stability and water contact angle, as well as resulting in smaller fibrils. This lower size, together with the lower lignin content, resulted in a slightly lower thermal stability. The reinforcing potential of the LCNFs when incorporated into a ductile polymer matrix was also explored by preparing nanocomposite films with different LCNF contents that were mechanically tested under linear and non-linear regimes by dynamic mechanical analysis (DMA) and tensile tests. For comparison purposes, the reinforcing effect of the LCNFs with lignin-free CNFs was also reported based on literature data. It was found that lignin hinders the network-forming capacity of LCNFs, as literature data shows a higher reinforcing potential of lignin-free CNFs. Nonetheless, the tensile strength of the acrylic matrix was enhanced by 10-fold at 10 wt% of LCNF content, This research was funded by Erasmus Program Erasmus +KA107 and the Spanish Ministry of Science and Innovation, to the project CON-FUTURO-ES (PID2020-113850RB-C22)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Flocculation of Cellulose Microfiber and Nanofiber Induced by Chitosan–Xylan Complexes

  • Bastida, Gabriela A.
  • Tarrés Farrés, Joaquim Agustí
  • Aguado, Roberto J.
  • Aguilar, Marc
  • Zanuttini, Miguel A.
  • Galván, María V.
This study aims to provide a comprehensive understanding of the key factors influencing the rheological behavior and the mechanisms of natural polyelectrolyte complexes (PECs) as flocculation agents for cellulose microfibers (CMFs) and nanofibers (CNFs). PECs were formed by combining two polyelectrolytes: xylan (Xyl) and chitosan (Ch), at different Xyl/Ch mass ratios: 60/40, 70/30, and 80/20. First, Xyl, Ch, and PEC solutions were characterized by measuring viscosity, critical concentration (c*), rheological parameter, ζ-potential, and hydrodynamic size. Then, the flocculation mechanisms of CMF and CNF suspensions with PECs under dynamic conditions were studied by measuring viscosity, while the flocculation under static conditions was examined through gel point measurements, floc average size determination, and ζ-potential analysis. The findings reveal that PEC solutions formed with a lower xylan mass ratio showed higher intrinsic viscosity, higher hydrodynamic size, higher z-potential, and a lower c*. This is due to the high molecular weight, charge, and gel-forming ability. All the analyzed solutions behave as a typical non-Newtonian shear-thinning fluid. The flocculation mechanisms under dynamic conditions showed that a very low dosage of PEC (between 2 and 6 mg PEC/g of fiber) was sufficient to produce flocculation. Under dynamic conditions, an increase in viscosity indicates flocculation at this low PEC dosage. Finally, under static conditions, maximum floc sizes were observed at the same PEC dosage where minimum gel points were reached. Higher PEC doses were required for CNF suspensions than for CMF suspensions, This work was supported by: (a) Agencia I+D+I (PICT 2018 Nº 4410, PICT 2019 Nº 03246 and PICT 2020 Nº 02920); (b) CAI+D 2020 PI, Tipo II-Nº 50620190100135LI; (c) CONICET; (d) Spanish Ministry of Science and Innovation to the projects CON-FUTURO-ES (PID2020-113850RB-C22) and VALORCON-NC (PDC2021-120964-C22)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Artificial neural network for aspect ratio prediction of lignocellulosic micro/nanofibers

  • Santos Ferreira, Alexandre
  • Aguado, Roberto J.
  • Corazza, Marcos L.
  • Tarrés Farrés, Joaquim Agustí
  • Sanchez-Salvador, José Luis
  • Blanco, Angeles
  • Negro Álvarez, Carlos
  • Aguilar, Marc
In this work a wide sample analysis, under similar conditions, has been carried out and a calibration strategy based on a careful selection of input variables combined with sensitivity analysis has enabled us to build accurate neural network models, with high correlation (R > 0.99), for the prediction of the aspect ratio of micro/nanofiber products. The model is based on cellulose content, applied energy, fiber length and diameter of the pre-treated pulps. The number of samples used to generate the neural network model was relatively low, consisting of just 15 samples coming from pine pulps that had undergone thermomechanical, kraft and bleached kraft treatments to produce a significant range of aspect ratio. However, the ANN model, involving 4 inputs and 4 hidden neurons and calibrated on the basis of pine dataset, was accurate and robust enough to predict the aspect ratio of micro/nanofiber materials obtained from other cellulose sources including very different softwood and hardwood species such as Spruce, Eucalyptus and Aspen (R = 0.84). The neural network model was able to capture the nonlinearities involved in the data providing insight about the profile of the aspect ratio achieved with further homogenization during the fibrillation process, The authors wish to acknowledge the fnancial support of the Spanish Ministry of Science and Innovation to the project CON-FUTURO-ES (PID2020-113850RB-C21 and PID2020-113850RB-C22) and VALORCON-NC (PDC2021- 120964-C21 and PDC2021-120964-C22). Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature.
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Sustainability of cellulose micro-/nanofibers: A comparative life cycle assessment of pathway technologies

  • Arfelis, Sergi
  • Aguado, Roberto J.
  • Civancik, Didem
  • Fullana i Palmer, Pere
  • Pèlach Serra, Maria Àngels
  • Tarrés Farrés, Joaquim Agustí
  • Aguilar, Marc
Cellulose micro- and nanofibers (CNFs) are commonly regarded as “greener” than petro-based materials. The high energy input that their production still demands, along with the use of chemicals or heat in some pretreatments, asks for a critical view. This paper attempts a life cycle assessment of CNFs produced from bleached hardwood kraft pulp via three different pre-treatments before mechanical homogenization. First, a fully mechanical route, based on a Valley beating pre-treatment. Second, an enzymatic route, based on endoglucanases and requiring certain temperature (~50 °C). Third, a TEMPO-mediated oxidation route, considering not only the impact of the chemical treatment itself but also the production of TEMPO from ammonia and acetone. The main output of the study is that both, mechanical and TEMPO-mediated oxidation routes, present lower impacts than the enzymatic pre-treatment. Although the mechanical route presents slightly milder contributions to climate change, acidification, eutrophication, and other indicators, saying that TEMPO-mediated oxidation is environmentally unfeasible should be put under question. After all, and despite being disregarded in most assessment publications up to date, it is the only well-known way to selectively oxidize primary hydroxyl groups and thus producing kinds of CNFs that are unthinkable by other ways., Authors wish to acknowledge the financial support of the Spanish Ministry of Science and Innovation to the projects CON-FUTURO-ES (PID2020-113850RB-C22) and VALORCON-NC (PDC2021-120964-C22), 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Innovative system based on natural polyelectrolyte complex and cellulose micro/nanofibers to improve drainability and properties of recycled paper

  • Bastida, Gabriela A.
  • Zanuttini, Miguel A.
  • Tarrés Farrés, Joaquim Agustí
  • Fiol Santaló, Núria
  • Delgado Aguilar, Marc
  • Galván, María V.
In this work, the efficiency of a polyelectrolyte complex (PEC) to retain different cellulose micro/nanofibers (CMNFs) during paper formation and to improve the physical properties of recycled unbleached fiber paper was analyzed. CMNFs were obtained from a commercial bleached eucalyptus pulp (BEP) using a PFI refiner followed by a chemical treatment with oxalic acid at two different concentrations. Finally, the pulp was fibrillated using a high-pressure homogenizer at three different intensities. The PEC was formed by addition of the xylan (Xyl) solution on chitosan (CH) solution with a Xyl/CH mass ratio of 80/20. The required dosages of PEC solution to neutralize the charges of different nanocellulose fractions were determined by ζ-potential measurements, and the CMNF retentions on recycled unbleached fibers were evaluated in a Britt Dynamic Drainage Jar. The results showed that the maximum retention was obtained when the neutral PEC-CMNF system was added to pulp. Besides, a significant decrease on °SR was observed when PEC and PEC-CMNF systems were added to the untreated pulp, limiting the negative effects of nanocellulose addition on pulp drainability. The incorporation of PEC-CMNF systems to the handsheets increased the tensile index (up to 28%), Mullen index (up to 40%) and internal bonding (up to 255%). Finally, the compressive strength of the handsheets, namely SCT and CMT, increased up to 30 and 70%, respectively. These simultaneous improvement on drainability and mechanical properties makes the proposed PEC-CMNF system a promising solution for the production of packaging paper, The present work has been funded by: (a) Agencia I + D + i (PICT 2018 Nº 4410 and PICT 2019 N◦ 03246); (b) ASaCTeI Santa Fe IO 2018 Nº 0299; (c) CAI + D 2020 PI, Tipo II-N◦ 50620190100135LI; (d) CONICET; (e) RED CYTED NANOCELIA (Scholarship); (f) Spanish Ministry of Science and Innovation to the project CON-FUTURO-ES (PID2020-113850RB-C22); (g) Spanish Ministry of Science and Innovation to the project NextPack (PID2021-124766OA-I00), Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving the Barrier Properties of Paper to Moisture, Air, and Grease with Nanocellulose-Based Coating Suspensions

  • Mazega Fontes, André
  • Tarrés Farrés, Joaquim Agustí
  • Aguado, Roberto J.
  • Pèlach Serra, Maria Àngels
  • Mutjé Pujol, Pere
  • Ferreira, Paulo J. T.
  • Aguilar, Marc
Food packaging manufacturers often resort to lamination, typically with materials which are neither non-biodegradable nor biobased polymers, to confer barrier properties to paper and cardboard. The present work considers a greener solution: enhancing paper’s resistance to moisture, grease, and air by aqueous coating suspensions. For hydrophobization, a combined approach between nanocellulose and common esterifying agents was considered, but the water vapor transmission rate (WVTR) remained excessively high for the goal of wrapping moisture-sensitive products (>600 g m−2 d−1). Nonetheless, oil-repellant surfaces were effectively obtained with nanocellulose, illite, sodium alginate, and/or poly(vinyl alcohol) (PVA), reaching Kit ratings up to 11. Regarding air resistance, mineral-rich coatings attained values above 1000 Gurley s. In light of these results, nanocellulose, minerals, PVA, pullulan, alginate, and a non-ionic surfactant were combined for multi-purpose coating formulations. It is hypothesized that these materials decrease porosity while complementing each other’s flaws, e.g., PVA succeeds at decreasing porosity but has low dimensional stability. As an example, a suspension mostly constituted by nanocellulose, sizing agents, minerals and PVA yielded a WVTR of roughly 100 g m−2 d−1, a Kit rating of 12, and an air resistance above 300 s/100 mL. This indicates that multi-purpose coatings can be satisfactorily incorporated into paper structures for food packaging applications, although not as the food contact layer, The authors wish to acknowledge the financial support of the Spanish Ministry of Science and Innovation to the projects CON‐FUTURO‐ES (PID2020‐113850RB‐C22) and NextPack (PID2021‐124766OA‐I00)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Non-covalently cationized nanocellulose from hemp: Kinetics, key properties, and paper strengthening

  • Aguado, Roberto J.
  • Tarrés Farrés, Joaquim Agustí
  • Mutjé Pujol, Pere
  • Pèlach Serra, Maria Àngels
  • Aguilar, Marc
Cationic cellulose, despite its long history, has yet to find a place in the paper industry. However, recent research is evaluating the potential of its nanoscale forms. Likewise, the processes of Western manufacturers are optimized for wood pulps, relegating non-wood crops to specific products that, as also proposed by current research, could include nanocellulose. We combined these trends with the existing knowledge of the strong adsorption of poly(diallyldimethylammonium chloride) (polyDADMAC) on cellulosic fibers, which can be deemed a non-covalent kind of cationization. For that, polyDADMAC was first anchored to refined hemp pulps, under conditions that allowed the deprotonation of the primary hydroxyl groups of cellulose. The fiber surface remained positively-charged even after thoroughly washing the samples, owing not only to the small proportions of acidic hemicelluloses and lignin, but also to stable ion-dipole interactions. This non-covalent cationization was found to follow pseudo-second order kinetics, indicating that diffusion through the fiber was the rate-controlling step. PolyDADMAC-containing fibers were then fibrillated by high-pressure homogenization. The surface charge of cationic nanocellulose was greater than that of the starting fibers, as the specific surface area increased. Nonetheless, polyDADMAC caused agglomeration of fibrils to a certain extent. As a drawback, when applied in papermaking, cationic nanocellulose lowered air permeability to a lesser extent than non-cationized nanofibers. As an advantage, the tensile index increased by up to 57% in the absence of any retention agent, Authors wish to acknowledge the financial support of the Spanish Ministry of Science and Innovation to the Project CON-FUTURO-ES (PID2020-113850RB-C22). Marc Delgado-Aguilar and Quim Tarrés are Serra Húnter Fellows, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Durable Nanocellulose-Stabilized Emulsions of Dithizone/Chloroform in Water for Hg2+ Detection: A Novel Approach for a Classical Problem

  • Aguado, Roberto J.
  • Mazega Fontes, André
  • Fiol Santaló, Núria
  • Tarrés Farrés, Joaquim Agustí
  • Mutjé Pujol, Pere
  • Aguilar, Marc
The use of dithizone (DTZ) for colorimetric heavy-metal detection is approximately one century old. However, its pending stability issues and the need for simple indicators justify further research. Using cellulose nanofibers, we attained DTZ-containing emulsions with high stability. These emulsions had water (at least 95 wt %) and acetic acid (1–8 mL/L) conforming the continuous phase, while dispersed droplets of diameter <1 μm contained chloroform-solvated DTZ (3 wt %). The solvation cluster was computed by molecular dynamics simulations, suggesting that chloroform slightly reduces the dihedral angle between the two sides of the thiocarbazone chain. Nanocellulose concentrations over 0.2 wt % sufficed to obtain macroscopically homogeneous mixtures with no phase separation. Furthermore, the rate of degradation of DTZ in the nanocellulose-stabilized emulsion did not differ significantly from a DTZ/chloroform solution, outperforming DTZ/toluene and DTZ/acetonitrile. Not only is the emulsion readily and immediately responsive to mercury(II), but it also decreases interferences from other ions and from natural samples. Unexpectedly, neither lead(II) nor cadmium(II) triggered a visual response at trace concentrations. The limit of detection of these emulsions is 15 μM or 3 mg/L, exceeding WHO limits for mercury(II) in drinking water, but they could be effective at raising alarms, TheauthorsacknowledgethefinancialsupportoftheSpanish MinistryofScienceandInnovationtotheprojectCONFUTURO-ES(PID2020-113850RB-C22). OpenAccessfundingwasprovidedthankstotheCRUE-CSICagreementwith ACS, Open Access funding provided thanks to the CRUE-CSIC agreement with ACS
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Behavior of the Flexural Strength of Hemp/Polypropylene Composites: Evaluation of the Intrinsic Flexural Strength of Untreated Hemp Strands

  • Vallejos, María Evangelina
  • Aguado, Roberto J.
  • Morcillo-Martín, Ramón
  • Méndez, José Alberto
  • Vilaseca Morera, Fabiola
  • Tarrés Farrés, Joaquim Agustí
  • Mutjé Pujol, Pere
The growing demand for plant fiber-reinforced composites offers new opportunities to compete against glass fiber (GF)-reinforced composites, but their performance must be assessed, revised, and improved as much as possible. This work reports on the production and the flexural strength of composites from polypropylene (PP) and hemp strands (20–50 wt.%), using maleic anhydride-grafted PP (MAPP) as a compatibilizer. A computational assessment of the reaction between cellulose and MAPP suggested the formation of only one ester bond per maleic anhydride unit as the most stable product. We determined the most favorable MAPP dosage to be 0.06 g per gram of fiber. The maximum enhancement in flexural strength that was attained with this proportion of MAPP was 148%, corresponding to the maximum fiber load. The modified rule of mixtures and the assumption of similar coupling factors for tensile and flexural strength allowed us to estimate the intrinsic flexural strength of hemp strands as 953 ± 116 MPa. While falling short of the values for sized GF (2415 MPa), the reinforcement efficiency parameter of the natural fibers (0.209) was found to be higher than that of GF (0.045)., The authors wish to acknowledge the financial support of the Spanish Ministry of Science and Innovation to the project CON-FUTURO-ES (PID2020-113850RB-C22)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tensile Strength of Poly(lactic acid)/Bleached Short Hemp Fiber Fully Green Composites as Replacement for Polypropylene/Glass Fiber

  • Aguado, Roberto J.
  • Espinach Orús, Xavier
  • Julián Pérez, Fernando
  • Tarrés Farrés, Joaquim Agustí
  • Aguilar, Marc
  • Mutjé Pujol, Pere
The compatibility between poly(lactic acid) (PLA) and natural fibers to develop bio-sourced, recyclable, and biodegradable composites remains a commonplace issue. This work highlights that, at least in the case of hemp, pulping and bleaching towards delignified short fibers attained remarkable improvements over untreated hemp strands. This approach differs from usual proposals of chemically modifying hydroxyl groups. Soda-bleached hemp fibers (SBHFs) granted a relatively large bonding surface area and a satisfactory quality of the interphase, even in the absence of any dispersant or compatibilizer. To attain satisfactory dispersion, the matrix and the fibers were subjected to kinetic mixing and to a moderately intensified extrusion process. Then, dog-bone specimens were prepared by injection molding. Up to a fiber content of 30 wt.%, the tensile strength increased linearly with the volume fraction of the dispersed phase. It reached a maximum value of 77.8 MPa, signifying a relative enhancement of about 52%. In comparison, the tensile strength for PLA/hemp strands was 55.7 MPa. Thence, based on the modified rule of mixtures and the Kelly & Tyson modified equation, we analyzed this performance at the level of the constituent materials. The interfacial shear strength (over 28 MPa) and other micromechanical parameters were computed. Overall, this biocomposite was found to outperform a polypropylene/sized glass fiber composite (without coupling agent) in terms of tensile strength, while fulfilling the principles of green chemistry, The authors wish to acknowledge the financial support of the Spanish Ministry of Science and Innovation to the project CON-FUTURO-ES (PID2020-113850RB-C22)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Dynamic Light Scattering Plus Scanning Electron Microscopy: Usefulness and Limitations of a Simplified Estimation of Nanocellulose Dimensions

  • Tarrés Farrés, Joaquim Agustí
  • Aguado, Roberto J.
  • Zoppe, Justin O.
  • Mutjé Pujol, Pere
  • Fiol Santaló, Núria
  • Aguilar, Marc
Measurements of nanocellulose size usually demand very high-resolution techniques and tedious image processing, mainly in what pertains to the length of nanofibers. Aiming to ease the process, this work assesses a relatively simple method to estimate the dimensions of nanocellulose particles with an aspect ratio greater than 1. Nanocellulose suspensions, both as nanofibers and as nanocrystals, are subjected to dynamic light scattering (DLS) and to field-emission scanning electron microscopy (FE-SEM). The former provides the hydrodynamic diameter, as long as the scatter angle and the consistency are adequate. Assays with different angles and concentrations compel us to recommend forward scattering (12.8°) and concentrations around 0.05–0.10 wt %. Then, FE-SEM with magnifications of ×5000–×20,000 generally suffices to obtain an acceptable approximation for the actual diameter, at least for bundles. Finally, length can be estimated by a simple geometric relationship. Regardless of whether they are collected from FE-SEM or DLS, size distributions are generally skewed to lower diameters. Width distributions from FE-SEM, in particular, are well fitted to log-normal functions. Overall, while this method is not valid for the thinnest fibrils or for single, small nanocrystals, it can be useful in lieu of very high-resolution techniques, The authors wish to acknowledge the financial support of the Spanish Ministry of Science and Innovation to the project CON-FUTURO-ES (PID2020-113850RB-C22)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Editorial. Preparation, Characterization and Industrial Application of Nanocellulose

  • Aguilar, Marc
  • Negro Álvarez, Carlos
Editorial of the special issue on “Preparation, Characterization and Industrial Application of Nanocellulose” of the magazine "Nanomaterials" (eissn 2079-4991). This Special Issue is the result of 13 contributions from 50 researchers in 22 research groups from 10 countries (Argentina, Canada, China, France, Japan, Portugal, Spain, Sweden, Tunisia, and the United States of America). These contributions cover most of the relevant areas related to nanocellulose production, characterization, and industrial applications. In this special issue, the authors have discussed novel production methods of nanostructured cellulose, as well as alternative raw materials with the purpose of enhancing the sustainable character of this nanomaterial. Some examples are the use of date palm wastes, annual plants, and harvesting residues. In terms of production methods, innovative systems are proposed such as oxalic acid or deep eutectic solvents (DES), as well as bottom-up approaches such as bacterial cellulose. This special issue also counts on specific articles devoted to characterization techniques, such as using gel-point and morphological measurements for assessing the characteristics of nanocellulose. And it also covers relevant aspects related to nanocellulose applications, with a special emphasis on their use as coating agents for paper, for the reinforcement of nanocomposites, and one research article is devoted to wastewater treatment, This Special Issue was organized in the frame of NANOPROSOST (references CTQ2017-85654-C2-1-R and CTQ2017-85654-C2-2-R) and CON-FUTURO-ES (references PID2020-113850RB-C21 and PID2020-113850RB-C22) projects, both funded by the Spanish Ministry of Science and Innovation, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Kinetic study and real-time monitoring strategy for TEMPO-mediated oxidation of bleached eucalyptus fibers

  • Mazega Fontes, André
  • Santos Ferreira, Alexandre
  • Aguado, Roberto J.
  • Tarrés Farrés, Joaquim Agustí
  • Fiol Santaló, Núria
  • Pèlach Serra, Maria Àngels
  • Delgado Aguilar, Marc
The present work aims at glimpsing the rate-determinant process parameters of TEMPO-mediated oxidation of bleached kraft cellulose for developing kinetic models and real-time monitoring tools. This may contribute to the scaling up of this reaction, frequently used as precursor of the production of cellulose nanofibers. For this, the effect of temperature, TEMPO and NaBr contents, and surface area of the fibers was assessed by means of a total experimental batch of 18 combinations, monitoring the carboxyl content (CC) of the samples and the NaOH consumption during oxidation. The obtained data was used to calculate the kinetic constant as a function of the conditions, as well as correlating the CC with the NaOH consumption, obtaining a strong linear correlation between these parameters. It was found that similar correlations could be used regardless process conditions, except for the case of TEMPO, which was found to protect the fibers from depolymerization and, thus, having different behavior at increasing TEMPO contents. Overall, the obtained results in the present study reveal the suitability of upscaling TEMPO-mediated oxidation, as well as having a deeper understanding on how the key parameters involved in the reaction affect the reaction path and, thus, contributing to the industrial deployment of oxidized cellulose and nanofibers, The present work has been funded by the Spanish Ministry of Science and Innovation, projects CON-FUTURO-ES (PID2020-113850RB-C22) and VALORCON-NC (PDC2021-120964-C22). Alexandre Ferreira Santos received funding from the Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq, Brazil) for his research stay at University of Girona. André Mazega Fontes received funding for his PhD thesis by the University of Girona (PhD grant IFUdG2020), Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Response of Polypropylene Composites Reinforced with Natural Fibers: Impact Strength and Water-Uptake Behaviors

  • Vallejos, María Evangelina
  • Vilaseca Morera, Fabiola
  • Méndez González, José Alberto
  • Espinach Orús, Xavier
  • Aguado, Roberto J.
  • Aguilar, Marc
  • Mutjé Pujol, Pere
Composites from polypropylene (PP) reinforced with hemp strands (HS) are prepared in the current work with the aim of deepening on the influence of this reinforcement on the impact performance of these specific composites. Despite all the research conducted in this field, the effect of this natural reinforcement on the absorbed energy during crack formation and propagation is not fully tackled in previous research works. From the methodology and samples’ geometry, the results concluded that the quality of the interface has a noticeable role in the impact resistance of these materials. The interface strength, fiber dispersion and fiber pullout are the main contributors to crack formation, whereas fiber pullout is the main one responsible for crack propagation. Maximum values of absorbed energy were found for PP composites comprising 20–30 wt% of HS and 8 wt% of the coupling agent for the un-notched samples, whereas maximum absorbed energy values corresponded to PP composites with 40 wt% of HS and 4 wt% of coupling agent for the notched samples. The water-absorption behavior in different humid environments is also examined. From the kinetic study, the water diffusion followed a Fickean behavior showing low-diffusion coefficients, increasing with fiber content. This systematic investigation represents a contribution to the analysis of the potential of reinforcing conventional polymers with natural materials, as a strategy towards more sustainable development, The authors wish to acknowledge the financial support of the Spanish Ministry of Science and Innovation to the project CON-FUTURO-ES (PID2020-113850RB-C22)