Pasar al contenido principal

PRODUCCION SOSTENIBLE DE NANOCELULOSAS PARA SU APLICACION EN DIFERENTES SECTORES Y PROCESOS INDUSTRIALES

CTQ2017-85654-C2-1-R

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal de I+D+i Orientado a los Retos de la Sociedad
Convocatoria Proyectos I+D+i Retos de Investigación
Año convocatoria 2017
Plan Estatal 2017-2020 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT DE GIRONA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 15
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Critical comparison of the properties of cellulose nanofibers produced from softwood and hardwood through enzymatic, chemical and mechanical processes

  • Sánchez-Salvador, José Luis
  • Campano, Cristina
  • Balea, Ana
  • Tarrés, Quim
  • Delgado-Aguilar, Marc
  • Mutjé, Pere
  • Blanco, Angeles
  • Negro, Carlos
10 p.-10 fig., Current knowledge on the properties of different types of cellulose nanofibers (CNFs) is fragmented. Properties variation is very extensive, depending on raw materials, effectiveness of the treatments to extract the cellulose fraction from the lignocellulosic biomass, pretreatments to facilitate cellulose fibrillation and final mechanical process to separate the microfibrils. Literature offers multiple parameters to characterize the CNFs prepared by different routes. However, there is a lack of an extensive guide to compare the CNFs. In this study, we perform a critical comparison of rheological, compositional, and morphological features of CNFs, produced from the most representative types of woody plants, hardwood and softwood, using different types and intensities of pretreatments, including enzymatic, chemical and mechanical ones, and varying the severity of mechanical treatment focusing on the relationship between macroscopic and microscopic parameters. This structured information will be exceedingly useful to select the most appropriate CNF for a certain application based on the most relevant parameters in each case., Authors want to acknowledge the Spanish Ministry of Economy and Competitiveness for the funding of the projects CTQ2017-85654-C2-1-R and CTQ2017-85654-C2-2-R, the Spanish Ministry of Science and Innovation (PDC2021-120964-C21 and PDC2021-120964-C22), the Community of Madrid for funding the RETO-PROSOST-2-CM (P2018/EMT4459), as well as the support of Universidad Complutense de Madrid and Banco de Santander for the grant of J.L. Sanchez-Salvador (CT17/17). Thanks also to Spanish Ministry of Science and Innovation for the Juan de la Cierva aid of Cristina Campano (Ref. FJC2019-040298-I)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Nanocrystalline Cellulose to Reduce Superplasticizer Demand in 3D Printing of Cementitious Materials

  • Jarabo, Rocío
  • Fuente, Elena
  • García Calvo, José Luis
  • Carballosa, Pedro
  • Negro, Carlos
One challenge for 3D printing is that the mortar must flow easily through the printer nozzle, and after printing, it must develop compressive strength fast and high enough to support the layers on it. This requires an exact and difficult control of the superplasticizer (SP) dosing. Nanocrystalline cellulose (CNC) has gained significant interest as a rheological modifier of mortar by interacting with the various cement components. This research studied the potential of nanocrystalline cellulose (CNC) as a mortar aid for 3D printing and its interactions with SPs. Interactions of a CNC and SP with cement suspensions were investigated by means of monitoring the effect on cement dispersion (by monitoring the particle chord length distributions in real time) and their impact on mortar mechanical properties. Although cement dispersion was increased by both CNC and SP, only CNC prevented cement agglomeration when shearing was reduced. Furthermore, combining SP and CNC led to faster development of compressive strength and increased compressive strength up to 30% compared to mortar that had undergone a one-day curing process., This research was funded by CDTI, grant number SNEO-20181016 (NEOTEC program), and by the Economy and Competitiveness Ministry of Spain, grant numbers: CTQ2017-85654-C2-1-R and CTQ2017-85654-C2-2-R., Peer reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Fit-for-Use Nanofibrillated Cellulose from Recovered Paper

  • Balea, Ana
  • Monte, M. Concepcion
  • Fuente González, Elena de la
  • Sanchez-Salvador, José Luis
  • Tarrés Farrés, Joaquim Agustí
  • Mutjé Pujol, Pere
  • Delgado Aguilar, Marc
  • Negro Álvarez, Carlos
The cost-effective implementation of nanofibrillated cellulose (CNF) at industrial scale requires optimizing the quality of the nanofibers according to their final application. Therefore, a portfolio of CNFs with different qualities is necessary, as well as further knowledge about how to obtain each of the main qualities. This paper presents the influence of various production techniques on the morphological characteristics and properties of CNFs produced from a mixture of recycled fibers. Five different pretreatments have been investigated: a mechanical pretreatment (PFI refining), two enzymatic hydrolysis strategies, and TEMPO-mediated oxidation under two different NaClO concentrations. For each pretreatment, five high-pressure homogenization (HPH) conditions have been considered. Our results show that the pretreatment determines the yield and the potential of HPH to enhance fibrillation and, therefore, the final CNF properties. These results enable one to select the most effective production method with the highest yield of produced CNFs from recovered paper for the desired CNF quality in diverse applications, The authors are grateful for the financial support by the Spanish Ministry of Science and Innovation to the projects CTQ20217-85654-C2-1-R and CTQ2017-85654-C2-2-R (NANOPROSOST) and PID2020-113850RB-C21 and PID2020-113850RB-C22 (CON-FUTURO-ES) and the Community of Madrid (project S2018/EMT-4459 “RETOPROSOST2-CM”), 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Electrospray deposition of cellulose nanofibers on paper: overcoming the limitations of conventional coating

  • Tarrés Farrés, Joaquim Agustí
  • Aguado, Roberto J.
  • Pèlach Serra, Maria Àngels
  • Mutjé Pujol, Pere
  • Aguilar, Marc
While the potential of cellulose nanofibers to enhance the mechanical and barrier properties of paper is well-known, there are many uncertainties with respect to how to apply them. In this study, we use not only bulk addition of micro-/nanofibers and bar coating with oxidized nanofibers, but also a combination of these and, as a novel element, electrospray deposition of nanofiber dispersions. Characterization involved testing the strength of uncoated and coated paper sheets, their resistance to air flow, their Bendtsen roughness, and their apparent density, plus visualization of their surface and cross-sections by scanning electron microscopy. As expected, bulk addition to the unrefined pulp was sufficient to attain substantial strengthening, but this enhancement was limited to approximately 124%. Following this, surface addition by bar coating improved air resistance, but not strength, since, as applying nanocellulose at high consistency was technically unfeasible, this was performed several times with detrimental drying stages in between. However, replacing bar coating with electrospraying helped us overcome these apparent limitations, producing enhancements in both barrier and tensile properties. It is concluded that electrosprayed nanofibers, owing to their uniform deposition and favorable interactions, operate as an effective binder between fibers (and/or fines), This research was funded by the Spanish Ministry of Science and Innovation, and the Spanish Ministry of Economy and Competitiveness, with the grant numbers PID2020-113850RB-C22 and CTQ2017-85654-C2-1-R, respectively
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Enhanced Morphological Characterization of Cellulose Nano/Microfibers through Image Skeleton Analysis

  • Sanchez-Salvador, José Luis
  • Campano, Cristina
  • López-Expósito, Patricio
  • Tarrés Farrés, Joaquim Agustí
  • Mutjé Pujol, Pere
  • Delgado Aguilar, Marc
  • Monte, M. Concepcion
  • Blanco, Angeles
The present paper proposes a novel approach for the morphological characterization of cellulose nano and microfibers suspensions (CMF/CNFs) based on the analysis of eroded CMF/CNF microscopy images. This approach offers a detailed morphological characterization and quantification of the micro and nanofibers networks present in the product, which allows the mode of fibrillation associated to the different CMF/CNF extraction conditions to be discerned. This information is needed to control CMF/CNF quality during industrial production. Five cellulose raw materials, from wood and non-wood sources, were subjected to mechanical, enzymatic, and (2,2,6,6-Tetramethylpiperidin-1-yl)oxyl (TEMPO)-mediated oxidative pre-treatments followed by different homogenization sequences to obtain products of different morphologies. Skeleton analysis of microscopy images provided in-depth morphological information of CMF/CNFs that, complemented with aspect ratio information, estimated from gel point data, allowed the quantification of: (i) fibers peeling after mechanical pretreatment; (ii) fibers shortening induced by enzymes, and (iii) CMF/CNF entanglement from TEMPO-mediated oxidation. Being mostly based on optical microscopy and image analysis, the present method is easy to implement at industrial scale as a tool to monitor and control CMF/CNF quality and homogeneity, This research was funded by the Spanish Ministry of Economy and Competitiveness for the funding of the projects CTQ2017-85654-C2-1-R and CTQ2017-85654-C2-2-R and the Community of Madrid via funding of RETO-PROSOST-2-CM (S2018/EMT4459), as well as the Universidad Complutense de Madrid and Banco de Santander via the grant of J.L. Sanchez-Salvador (CT17/17). Thanks also go to the Spanish Ministry of Science and Innovation for the Juan de la Cierva aid of Cristina Campano (Ref. FJC2019-040298-I). Marc Delgado-Aguilar is a Serra Húnter Fellow
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Research on the Strengthening Advantages on Using Cellulose Nanofibers as Polyvinyl Alcohol Reinforcement

  • Tarrés Farrés, Joaquim Agustí
  • Oliver Ortega, Helena
  • Alcalà Vilavella, Manel
  • Espinach Orús, Xavier
  • Mutjé Pujol, Pere
  • Delgado Aguilar, Marc
The present work aims to combine the unique properties of cellulose nanofibers (CNF) with polyvinyl alcohol (PVA) to obtain high-performance nanocomposites. CNF were obtained by means of TEMPO-mediated ((2,2,6,6-Tetramethylpiperidin-1-yl)oxyl) oxidation, incorporated into the PVA matrix by means of compounding in a single-screw co-rotating internal mixer and then processed by means of injection molding. It was found that CNF were able to improve the tensile strength of PVA in 85% when 4.50 wt % of CNF were added. In addition, the incorporation of a 2.25 wt % of CNF enhanced the tensile strength to the same level that when 40 wt % of microsized fibers (stone groundwood pulp, SGW) were incorporated, which indicated that CNF possessed significantly higher intrinsic mechanical properties than microsized fibers. SGW was selected as reference for microsized fibers due to their extended use in wood plastic composites. Finally, a micromechanical analysis was performed, obtaining coupling factors near to 0.2, indicating good interphase between CNF and PVA. Overall, it was found that the use of CNF is clearly advantageous to the use of common cellulosic fibers if superior mechanical properties are desired, but there are still some limitations that are related to processing that restrict the reinforcement content at low contents, This research was funded by the Ministerio de Ciencia e Innovación, grant number CTQ2017-85654-C2-1-R, project NANOPROSOST
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Correlation between rheological measurements and morphological features of lignocellulosic micro/nanofibers from different softwood sources

  • Serra Parareda, Ferran
  • Tarrés Farrés, Joaquim Agustí
  • Mutjé Pujol, Pere
  • Balea, Ana
  • Campano, Cristina
  • Sanchez-Salvador, José Luis
  • Negro Álvarez, Carlos
  • Delgado Aguilar, Marc
The transition of nanocellulose production from laboratory to industrial scale requires robust monitoring systems that keeps a quality control along the production chain. The present work aims at providing a deeper insight on the main factors affecting the rheological behavior of (ligno)cellulose micro/nanofibers (LCMNFs) and cellulose micro/nanofibers (CMNFs) and how they could correlate with their characteristics. To this end, 20 types of LCMNFs and CMNFs were produced combining mechanical refining and high-pressure homogenization from different raw materials. Aspect ratio and bending capacity of the fibrils played a key role on increasing the viscosity of the suspensions by instigating the formation of entangled structures. Surface charge, reflected by the cationic demand, played opposing effects on the viscosity by reducing the fibrils' contact due to repulsive forces. The suspensions also showed increasing shear-thinning behavior with fibrillation degree, which was attributed to increased surface charge and higher water retention capacity, enabling the fibrils to slide past each other more easily when subjected to flow conditions. The present work elucidates the existing relationships between LCMNF/CMNF properties and their rheological behavior, considering fibrillation intensity and the initial raw material characteristics, in view of the potential of rheological measurements as an industrial scalable characterization technology, Authors wish to acknowledge the financial support of the Spanish Economy and Competitiveness Ministry to the Project NANOPROSOST (references CTQ2017-85654-C2-1-R and CTQ2017-85654-C2-2-R), as well as the support of Universidad Complutense de Madrid and Banco de Santander for the grant of J.L. Sanchez-Salvador (CT17/17). Also thanks to the Spanish Ministry of Science and Innovation for the Juan de la Cierva aid of Cristina Campano (Ref. FJC2019-040298-I) and the Spanish National Centre of Electronic Microscopy for the support during image acquisition. Marc Delgado-Aguilar is a Serra Húnter Fellow, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Tuning morphology and structure of non-woody nanocellulose: ranging between nanofibers and nanocrystals

  • Serra Parareda, Ferran
  • Tarrés Farrés, Joaquim Agustí
  • Sanchez-Salvador, José Luis
  • Campano, Cristina
  • Pèlach Serra, Maria Àngels
  • Mutjé Pujol, Pere
  • Negro Álvarez, Carlos
  • Delgado Aguilar, Marc
Due to the increasing interest on lignocellulosic nanomaterials, alternative raw materials to wood sources have been explored. In this sense, annual plants can represent an important source of lignocellulose which may be used for cellulose nanofibers (CNFs) production. The present work aims at highlighting the virtues of three different non-woody resources (jute, sisal and hemp) as raw material for the production of TEMPO-mediated oxidized CNFs. The fibrillation stage was carried out by means of high-pressure homogenization (HPH), sequencing the process to obtain the initial, intermediate and final characteristics. Interestingly, it was found that while wood-based TEMPO-mediated oxidized CNFs lead highly fibrillated structures and thick gels, the obtained CNFs in this work exhibited a structure similar to cellulose nanocrystals (CNCs), particularly at high oxidation degrees, as rod-like morphologies were observed. Nonetheless, differences were observed between the selected raw materials, which was attributed to the differences on their relative recalcitrance. In addition, the rheological evaluation indicated that hemp CNFs tended to a Newtonian behavior, as flow behavior index tended to 1, leading to suspensions radically different to those obtained from wood sources. Further, the rheological behavior of the obtained nanocellulose suspensions has been found to correlate with the 2D fractal dimension of the nanostructured cellulose. Overall, the present work shows the feasibility of using non-woody plants as raw material for nanostructured cellulose production, with interesting characteristics unconceivable with wood resources, The authors want to acknowledge the Spanish Ministry of Economy and Competitiveness for the funding of the project NANOPROSOST, references CTQ2017-85654-C2-1-R and CTQ2017-85654-C2-2-R. Authors want also to thank Spanish Ministry of Science and Innovation for the Juan de la Cierva aid of Cristina Campano (Ref. FJC2019-040298-I), the support of Universidad Complutense de Madrid and Banco de Santander for the grant of J.L. Sanchez-Salvador (CT17/17) and the Spanish National Centre of Electronic Microscopy for the support during image acquisition. Marc Delgado-Aguilar is a Serra Húnter Fellow, Open Access funding provided thanks to the CRUE-CSIC agreement with Elsevier
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Influence of pretreatment and mechanical nanofibrillation energy on properties of nanofibers from Aspen cellulose

  • Balea, Ana
  • Fuente González, Elena de la
  • Tarrés Farrés, Joaquim Agustí
  • Pèlach Serra, Maria Àngels
  • Mutjé Pujol, Pere
  • Aguilar, Marc
  • Blanco, Angeles
  • Negro Álvarez, Carlos
The characteristics of cellulose nanofibers (CNFs) depend on many factors such as the raw material, type and intensity of the pre-treatment, and type and severity of the mechanical defibrillation process. The relationship among factors is complex but crucial in determining the final, fit-for-use CNF properties. This study aims to find the relationship between the CNF properties morphology, aspect ratio, nanofibrillation yield, transmittance and cationic demand, and the production process using bleached Aspen thermomechanical pulp as the raw material. Five different types of pretreatments were carried out and five different defibrillation intensities of highpressure homogenization were evaluated. Pretreatments were: PFI refining at 20,000 revolutions, enzymatic hydrolysis with 80 and 240 g of enzyme per ton of dry pulp and TEMPO (2,2,6,6-tetramethylpiperidine-1-oxyl)-mediated oxidation with 5 and 15 mmol of NaClO per gram of dry pulp. From the twenty-five different procedures evaluated, results show that both the pretreatment and the severity of the high-pressure homogenization determined both the fibrillation yield and the CNF morphology. Moreover, the main properties of CNFs (cationic demand, yield, transmittance and aspect ratio) can be estimated from the carboxylic content of the pretreated pulp, which would facilitate the control of the CNF production and their tuning according to the production needs, This research has been supported by Economy and Competitiveness Ministry of Spain (Projects CTQ2017-85654-C2-1-R and CTQ2017-85654-C2-2-R) and the Community of Madrid (Project S2018/EMT-4459-RETO-PROSOST2-CM), Open Access funding provided thanks to the CRUE-CSIC agreement with Springer Nature
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Editorial. Preparation, Characterization and Industrial Application of Nanocellulose

  • Aguilar, Marc
  • Negro Álvarez, Carlos
Editorial of the special issue on “Preparation, Characterization and Industrial Application of Nanocellulose” of the magazine "Nanomaterials" (eissn 2079-4991). This Special Issue is the result of 13 contributions from 50 researchers in 22 research groups from 10 countries (Argentina, Canada, China, France, Japan, Portugal, Spain, Sweden, Tunisia, and the United States of America). These contributions cover most of the relevant areas related to nanocellulose production, characterization, and industrial applications. In this special issue, the authors have discussed novel production methods of nanostructured cellulose, as well as alternative raw materials with the purpose of enhancing the sustainable character of this nanomaterial. Some examples are the use of date palm wastes, annual plants, and harvesting residues. In terms of production methods, innovative systems are proposed such as oxalic acid or deep eutectic solvents (DES), as well as bottom-up approaches such as bacterial cellulose. This special issue also counts on specific articles devoted to characterization techniques, such as using gel-point and morphological measurements for assessing the characteristics of nanocellulose. And it also covers relevant aspects related to nanocellulose applications, with a special emphasis on their use as coating agents for paper, for the reinforcement of nanocomposites, and one research article is devoted to wastewater treatment, This Special Issue was organized in the frame of NANOPROSOST (references CTQ2017-85654-C2-1-R and CTQ2017-85654-C2-2-R) and CON-FUTURO-ES (references PID2020-113850RB-C21 and PID2020-113850RB-C22) projects, both funded by the Spanish Ministry of Science and Innovation, 9
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

TEMPO-Oxidized Cellulose Nanofibers: A Potential Bio-Based Superabsorbent for Diaper Production

  • Patiño Masó, Josefina
  • Serra Parareda, Jordi
  • Tarrés Farrés, Joaquim Agustí
  • Mutjé Pujol, Pere
  • Espinach Orús, Xavier
  • Delgado Aguilar, Marc
Single-use plastics are expected to disappear, mainly due to the rise of stricter regulations to combat their impact on the environment. As an example, the recent European Directive on Single-Use-Plastics (SUP) will be implemented between 2021 and 2024 and will directly prohibit the use of some SUP. Baby diapers are one of the most used single-used products in our daily lives, and it is estimated that most of the ~4000 diapers that each baby uses in their life go to landfill. Such diapers usually contain superabsorbent polymers (SAP) that are based on acrylic acid-acrylamide mixtures with high water retention capacity, but they are neither bio-based nor biodegradable. In this work, we have developed bio-based superabsorbent aerogels made of cellulose nanofibers (CNF) and propose their potential use in baby diapers. TEMPO-oxidized CNF at different oxidation degrees were prepared and tested. The obtained CNF exhibited higher free swelling capacity (FSC) than the commercial fluff pulp (ranging from 117.62% to 245.21% higher) and also than the diaper absorbent, except for CNF-5 (ranging from 31.56% to 54.55%), even under compression. Overall, the present work shows a case study where CNF could have a potential application with market opportunities, This research was funded by the Spanish Ministry of Economy and Competitiveness in the frame of NANOPROSOST project, grant number CTQ2017-85654-C2-1-R
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Micro- and Nanofibrillated Cellulose from Annual Plant-Sourced Fibers: Comparison between Enzymatic Hydrolysis and Mechanical Refining

  • Aguado, Roberto J.
  • Tarrés Farrés, Joaquim Agustí
  • Pèlach Serra, Maria Àngels
  • Mutjé Pujol, Pere
  • Fuente González, Elena de la
  • Sanchez-Salvador, José Luis
  • Negro Álvarez, Carlos
  • Aguilar, Marc
The current trends in micro-/nanofibers offer a new and unmissable chance for the recovery of cellulose from non-woody crops. This work assesses a technically feasible approach for the production of micro- and nanofibrillated cellulose (MNFC) from jute, sisal and hemp, involving refining and enzymatic hydrolysis as pretreatments. Regarding the latter, only slight enhancements of nanofibrillation, transparency and specific surface area were recorded when increasing the dose of endoglucanases from 80 to 240 mg/kg. This supports the idea that highly ordered cellulose structures near the fiber wall are resistant to hydrolysis and hinder the diffusion of glucanases. Mechanical MNFC displayed the highest aspect ratio, up to 228 for hemp. Increasing the number of homogenization cycles increased the apparent viscosity in most cases, up to 0.14 Pa·s at 100 s−1 (1 wt.% consistency). A shear-thinning behavior, more marked for MNFC from jute and sisal, was evidenced in all cases. We conclude that, since both the raw material and the pretreatment play a major role, the unique characteristics of non-woody MNFC, either mechanical or enzymatically pretreated (low dose), make it worth considering for large-scale processes, Authors wish to acknowledge the financial support of the Spanish Ministry of Economy and Competitiveness to the project NANOPROSOST (CTQ2017-85654-C2-1-R and CTQ2017-85654-C2-2-R)
Docta Complutense
Publicación Artículo científico (JournalArticle)

Nanocellulose characterization challenges

  • Balea Martín, Ana
  • Blanco Suárez, María Ángeles
  • Delgado-Aguilar, Marc
  • Monte Lara, María Concepción
  • Tarrés, Quim
  • Fuente González, Elena de la
  • Mutjé, Per
  • Negro Álvarez, Carlos Manuel
Despite the extraordinary properties of nanocellulose (NC), as confirmed through two decades of exhaustive research, addressing an array of potential applications, the NC market is still far from reaching its full potential. Among the main causes is the lack of process-adapted measuring tools capable of characterizing NC, at acceptable speed and reliability, to meet the industrial demands in a cost-effective way. Therefore, reliable characterization methodologies of NC and new standards are of paramount importance in ensuring reproducible research results and quality control specifications for present and future NC products and applications. Furthermore, the successful industrial use of NC products depends on critical parameters that are still being identified and studied. This review paper aims to identify some of the current drawbacks and limitations in NC characterization that hinder their commercial deployment. Moreover, important challenges related to characterization and new opportunities for future research in this field are addressed.</jats:p>
Docta Complutense
Publicación Artículo científico (JournalArticle)

Correlation between rheological measurements and morphological features of lignocellulosic micro/nanofibers from different softwood sources

  • Serra-Parareda, Ferran
  • Tarrés, Quim
  • Mutjé, Pere
  • Balea Martín, Ana
  • Campano, Cristina
  • Sánchez Salvador, José Luis
  • Negro Álvarez, Carlos Manuel
  • Delgado-Aguilar, Marc
The transition of nanocellulose production from laboratory to industrial scale requires robust monitoring systems that keeps a quality control along the production chain. The present work aims at providing a deeper insight on the main factors affecting the rheological behavior of (ligno)cellulose micro/nanofibers (LCMNFs) and cellulose micro/nanofibers (CMNFs) and how they could correlate with their characteristics. To this end, 20 types of LCMNFs and CMNFs were produced combining mechanical refining and high-pressure homogenization from different raw materials. Aspect ratio and bending capacity of the fibrils played a key role on increasing the viscosity of the suspensions by instigating the formation of entangled structures. Surface charge, reflected by the cationic demand, played opposing effects on the viscosity by reducing the fibrils' contact due to repulsive forces. The suspensions also showed increasing shear-thinning behavior with fibrillation degree, which was attributed to increased surface charge and higher water retention capacity, enabling the fibrils to slide past each other more easily when subjected to flow conditions. The present work elucidates the existing relationships between LCMNF/CMNF properties and their rheological behavior, considering fibrillation intensity and the initial raw material characteristics, in view of the potential of rheological measurements as an industrial scalable characterization technology.