Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 11
Encontrada(s) 1 página(s)

Docta Complutense
Publicación Artículo científico (JournalArticle)

β-Ga2O3:Cr nanowires with optical microcavities for determining local heating induced by x-ray nanobeams

  • Carrasco Madrigal , Daniel
  • Dolado, J.
  • Pérez Peinado, Paula
  • Rodríguez Fernández, Beatriz
  • Alonso Orts, Manuel
  • San Juan, J. M.
  • Nó, M. L.
  • Hidalgo Alcalde, Pedro
  • Martínez-Criado, G.
  • Méndez Martín, María Bianchi
  • Nogales Díaz, Emilio
This study explores the x-ray excited optical luminescence (XEOL) of optical microcavities fabricated in β-Ga2O3:Cr nanowires (NWs). XEOL measurements reveal prominent luminescence bands in the near ultraviolet-blue (NUV-B) and in the red-near infrared (R-NIR) spectral regions. The NUV-B emission originates from β-Ga2O3 defects, while the R-NIR band is attributed to Cr3+ intraionic transitions. Both spectral regions exhibit sharp resonances, which are analyzed as Fabry–Pérot and whispering gallery mode resonances. Exposure to x-ray nanobeam induces a redshift of the sharp R-NIR peaks, attributed to local temperature increase in the NWs caused by x-ray absorption. The influence of this temperature rise on the NUV-B peaks is also evaluated. In addition, the local temperature increase due to x-ray absorption is estimated through COMSOL finite-difference time-domain simulations, incorporating the material’s physical and thermal properties. This work demonstrates the application of β-Ga2O3:Cr optical microcavities as luminescence-based nanothermometers to probe the localized effects of x-ray nanobeam irradiation.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Controllable synthesis and morphology-dependent light emission efficiency of Zn2GeO4 nanophosphors

  • Tinoco Rivas, Miguel
  • Lendínez, José Miguel
  • González Calbet, José María
  • Méndez Martín, María Bianchi
  • Ramírez Castellanos, Julio
  • Hidalgo Alcalde, Pedro
Zn2GeO4 is considered a very promising alternative to current luminescent semiconductors. Previous results suggest that its emitted wavelength may depend on different variables, such as particle size and morphology, among others. In this work, we have prepared pure and highly homogeneous Zn2GeO4 nanorods under hydrothermal synthesis conditions with a willemite-like structure. Their luminescent properties have been explored and their band gap is estimated, which are distinct from those of previously reported Zn2GeO4 bulk particles. Therefore, our results identify particle morphology as a crucial factor for maximizing and fine-tuning the luminescence of Zn2GeO4 nano-phosphors.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Temperature-dependent anisotropic refractive index in β-Ga2O3: application in interferometric thermometers

  • Carrasco, Daniel
  • Nieto-Pinero, Eva
  • Alonso-Orts, Manuel
  • Serna, Rosalía
  • San Juan, José M.
  • Nó, María L.
  • Jesenovec, Jani
  • McCloy, John S.
  • Nogales, Emilio
  • Méndez, Bianchi
An accurate knowledge of the optical properties of β-Ga2O3 is key to developing the full potential of this oxide for photonics applications. In particular, the dependence of these properties on temperature is still being studied. Optical micro- and nanocavities are promising for a wide range of applications. They can be created within microwires and nanowires via distributed Bragg reflectors (DBR), i.e., periodic patterns of the refractive index in dielectric materials, acting as tunable mirrors. In this work, the effect of temperature on the anisotropic refractive index of β-Ga2O3 n(λ,T) was analyzed with ellipsometry in a bulk crystal, and temperature-dependent dispersion relations were obtained, with them being fitted to Sellmeier formalism in the visible range. Micro-photoluminescence (μ-PL) spectroscopy of microcavities that developed within Cr-doped β-Ga2O3 nanowires shows the characteristic thermal shift of red–infrared Fabry–Perot optical resonances when excited with different laser powers. The origin of this shift is mainly related to the variation in the temperature of the refractive index. A comparison of these two experimental results was performed by finite-difference time-domain (FDTD) simulations, considering the exact morphology of the wires and the temperature-dependent, anisotropic refractive index. The shifts caused by temperature variations observed by μ-PL are similar, though slightly larger than those obtained with FDTD when implementing the n(λ,T) obtained with ellipsometry. The thermo-optic coefficient was calculated., This work was supported by MICINN projects (RTI2018-097195-B-I00, RTI2018-096918-B-C41, PID2021-122562NB-I00 and PID2021-123190OB-I00/AEI/10.13039/501100011033/FEDER, UE). The authors acknowledge the financial support of the excellence research network RED2018-102609-T by MINECO. The authors acknowledge the support from the Air Force Office of Scientific Research under Award No. FA8655-20-1-7013 (Program Manager: Ali Sayir). M.A.-O. acknowledges financial support from MICINN (FPU contract No. FPU15/01982) and thanks the Central Research Development Fund (CRDF) of the University of Bremen for funding (ZF04/2021). J.S.M. and J.J. were supported by the Air Force Office of Scientific Research under award number FA9550–21–1–0507, monitored by Dr. Ali Sayir. Any opinions, finding, and conclusions or recommendations expressed in this material are those of the author and do not necessarily reflect the views of the United States Air Force., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

β-Ga2O3:Cr nanowires with optical microcavities for determining local heating induced by x-ray nanobeams

  • Carrasco, D.
  • Dolado, J.
  • Pérez-Peinado, P.
  • Rodríguez, B.
  • Alonso-Orts, M.
  • San Juan, J.M.
  • Nó, M.L.
  • Hidalgo, P.
  • Martínez-Criado, Gema
  • Méndez, B.
  • Nogales, E.
This study explores the x-ray excited optical luminescence (XEOL) of optical microcavities fabricated in β-Ga2O3:Cr nanowires (NWs). XEOL measurements reveal prominent luminescence bands in the near ultraviolet-blue (NUV-B) and in the red-near infrared (R-NIR) spectral regions. The NUV-B emission originates from β-Ga2O3 defects, while the R-NIR band is attributed to Cr3+ intraionic transitions. Both spectral regions exhibit sharp resonances, which are analyzed as Fabry-Pérot and whispering gallery mode resonances. Exposure to x-ray nanobeam induces a redshift of the sharp R-NIR peaks, attributed to local temperature increase in the NWs caused by x-ray absorption. The influence of this temperature rise on the NUV-B peaks is also evaluated. In addition, the local temperature increase due to x-ray absorption is estimated through COMSOL finite-difference time-domain simulations, incorporating the material’s physical and thermal properties. This work demonstrates the application of β-Ga2O3:Cr optical microcavities as luminescence-based nanothermometers to probe the localized effects of x-ray nanobeam irradiation. © 2025 Author(s)., The authors thank the ESRF for granting beamtime for this work on beamline ID16B (experiment MA-5727) and extend their gratitude to Valentina Bonino for her support as local contact during the experiment. This work was supported by MCIN Project No. PID2021-122562NB-I00, Grant No. TED2021- 130139BI00, and Grant No. PDC2023-145868-I00; funded by Grant No. MCIN/AEI/10.13039/501100011033 and by the European Union NextGenerationEU/PRTR; Grant MAD2D-CM-UCM funded by Comunidad de Madrid, by the Recovery, Transformation, and Resilience Plan, and by Next GenerationEU from the European Union. The authors also acknowledge support from the Air Force Office of Scientific Research under Award Nos. FA8655-20- 1-7013 and FA8655-23-1-7002 (Program Manager: Ali Sayir). This work made use of the FIB facilities of the SGIker of electron microscopy and microanalysis of materials from the UPV/EHU. Additional support was provided by the Deutsche Forschungsgemeinschaft (Grant No. DFG, INST 144/462-1 FUGG). M.A.-O. acknowledges the financial support from the Central Research Development Fund (CRDF) of the University of Bremen (Grant No. ZF04/2021), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Engineered Optical and Electronic Properties in β-Ga2O3/SnO2Nanowire Networks

  • Dolado, J.
  • Pérez-Peinado, P.
  • Carrasco, D.
  • Martínez-Casado, R.
  • Bonino, V.
  • Nogales, E.
  • Méndez, B.
  • Martínez-Criado, Gema
Integration of semiconductor nanowires is critical for developing scalable and versatile nanodevices, but challenges remain in tailoring optical emission, forming reliable p–n junctions, and ensuring consistent nanoscale interconnection. Here, we investigate Ga2O3/SnO2multiwire architectures using synchrotron-based X-ray fluorescence (XRF), X-ray excited optical luminescence (XEOL), X-ray absorption near-edge spectroscopy (XANES), and first-principles simulations. We map dopant distribution, analyze nanoscale optical responses, and determine dopant atomic coordination. The central wire is predominantly Sn-doped Ga2O3, while crossed wires are Ga-doped SnO2. XEOL maps reveal a pronounced enhancement of the 3.5 eV ultraviolet emission in Ga2O3at the junctions, enabling controlled optical modulation. XANES and ab initio calculations confirm that Sn and Ga dopants preferentially occupy octahedral sites, introducing donor levels in Ga2O3and acceptor levels in SnO2. This research significantly advances our understanding of dopant effects in complex semiconductor nanowire systems, paving the way for controlled optical emissions in Ga2O3/SnO2multiwire architectures. © 2025 American Chemical Society, The authors thank the ESRF for the beamtime granted for this work on the beamline ID16B (experiment: MA-5727). J.D. especially acknowledges the financial support of ESRF for his postdoctoral fellowship position. P.P.-P., D.C., E.N., and B.M. acknowledge the financial support through MCIN/AEI/10.13039/50110001 projects (PID2021-122562NB-I00, TED2021-130139B-I00, and PCI2023-143388), the European Union NextGeneration EU/PRTR, and the Air Force Office of Scientific Research under Awards FA8655-20-1-7013 and FA8655-23-1-7002 (Program Manager: Ali Sayir)., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Probing Ge-Induced Strain and Emission in Rutile Sn1–xGexO2Nanocrystals

  • Dolado, J.
  • Zatterin, E.
  • Benter, S.
  • Martínez-Casado, R.
  • Hindsmarsh, S.A.
  • Sánchez, A.M.
  • Schülli, T.U.
  • Hidalgo, P.
  • Méndez, B.
  • Martínez-Criado, Gema
Rutile-phase GeO2and its alloys, such as SnxGe1–xO2, are promising semiconductors due to their ultrawide-bandgaps (4.4–4.7 eV), high carrier mobilities, ambipolar dopability, and excellent thermal conductivity. However, GeO2preferentially crystallizes in the α-quartz phase under ambient conditions, limiting the exploration of its rutile form. Alloying with rutile SnO2offers a route to stabilize this metastable phase. Here, we report the nanoscale characterization of rutile-SnxGe1–xO2nanocrystals grown on Zn2GeO4nanowires, achieving Ge incorporation well beyond its solubility limit while preserving the rutile structure. Exploiting advanced X-ray nanoprobe techniques, we achieve a correlative view of the composition, structure, and optical properties within individual SnxGe1–xO2nanostructures. Our results reveal preferential Ge accumulation along the faceted sides, generating local strain gradients without disrupting the rutile phase. Spatially resolved luminescence measurements show enhanced defect-related orange emission (∼2.1 eV) at the faceted nanocrystal edges. First-principles calculations confirm that while Ge incorporation modulates the bandgap of the alloy, the primary factors governing luminescence are the presence of oxygen vacancies and the increased surface-to-volume ratio at the crystallite edges. These findings establish a robust multimodal nanoscale approach for characterizing and engineering next-generation oxide nanomaterials with tunable optoelectronic properties. © 2025 American Chemical Society, The authors thank the ESRF for the beamtime granted for this work on the beamline ID01 (experiment MA-5999, DOI: 10.15151/ESRF-ES-1437868139) and the in-house time on the ID16B beamline. The authors also thank Irina Snigireva for her assistance in the Microimaging and Micromanipulation Laboratory at the ESRF. J.D. especially acknowledges the financial support of ESRF for his postdoctoral fellowship position. P.H., R.M., and B.M. acknowledge financial support from MCIN/AEI/10.13039/5011001 (Grant PID2021-122562NB-I00), Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Proving Optical Anisotropy and Polarization Effects inβ-Ga 2 O 3 Nanomembranes via X-Ray Excited OpticalLuminescence

  • Pérez-Peinado, Paula
  • Dolado, Jaime
  • Alcázar Ruano, Pedro L.
  • Carrasco, Daniel
  • Martínez-Casado, Ruth
  • Bonino, Valentina
  • Martínez-Criado, Gema
  • Jesenovec, Jani
  • McCloy, John S.
  • Domínguez-Adame, Francisco
  • Quereda, Jorge
  • Nogales, Emilio
  • Méndez, Bianchi
Monoclinic β-Ga2⁢O3 is a key representative material of the ultrawide-bandgap semiconductor family. The distinct atomic arrangement in β-Ga2⁢O3 introduces two coordination environments for Ga ions, resulting in pronounced anisotropy in its optical, electronic, and thermal properties. In this study, a synchrotron nanoprobe to investigate the anisotropic optical properties of well-oriented (100) β-Ga2⁢O3 nanomembranes with a thickness of 200  nm, produced through mechanical exfoliation, is employed. Polarization-resolved X-ray excited optical luminescence (XEOL) measurements reveal a strong ultraviolet (UV) emission band at 3.4  eV, which is strongly polarized along the c-axis. Additionally, XEOL data show blue (2.9  eV) and deep-UV (3.8  eV) emissions. Notably, the deep-UV band, rarely reported in conventional photoluminescence studies, is attributed to the presence of Ga vacancies, as supported by first-principles calculations. Polarization-dependent X-ray absorption near-edge structure (XANES) spectroscopy allows one to probe the distinct symmetries of the b and c crystallographic planes. Furthermore, by combining XANES and XEOL, this study investigates the site-specific contributions of Ga ions to the luminescence process. These findings highlight the potential of β-Ga2⁢O3 nanomembranes as a robust material platform for developing polarization-sensitive devices. The pronounced anisotropy of β-Ga2⁢O3 causes orientation-dependent optoelectronic properties, making it a highly promising candidate for a wide range of advanced applications., The authors acknowledge financial support from Comunidad de Madrid (Recovery, Transformation and Resilience Plan) and NextGenerationEU from the European Union (Grant MAD2D-CM-UCM4/5) and Agencia Estatal de Investigación of Spain (Grants PID2021-122562NB-I00 and PID2022-136285NB-C31/3). The authors also acknowledge the support from the Air Force Office of Scientific Research under Award No. FA8655-20-1-7013 (Program Manager: Ali Sayir). J.D. especially acknowledges the financial support of ESRF for his postdoctoral fellowship position. The authors thank the ESRF for the beamtime granted for this work on the beamline ID16B (experiment: MA-6177)., Peer reviewed
Docta Complutense
Publicación Artículo científico (JournalArticle)

Proving optical anisotropy and polarization effects in β-Ga2O3 nanomembranes via X-Ray excited optical luminescence

  • Pérez Peinado, Paula
  • Dolado, J.
  • Alcázar Ruano, Pedro Luis
  • Carrasco Madrigal, Daniel
  • Martínez Casado, María Ruth
  • Bonino, Valentina
  • Martínez Criado, Gema
  • Jesenovec, Jani
  • McCloy, John S.
  • Domínguez-Adame Acosta, Francisco
  • Quereda, Jorge
  • Nogales Díaz, Emilio
  • Méndez Martín, María Bianchi
Monoclinic beta-Ga2O3 is a key representative material of the ultrawide-bandgap semiconductor family. The distinct atomic arrangement in beta-Ga2O3 introduces two coordination environments for Ga ions, resulting in pronounced anisotropy in its optical, electronic, and thermal properties. In this study, a synchrotron nanoprobe to investigate the anisotropic optical properties of well-oriented (100) beta-Ga2O3 nanomembranes with a thickness of 200 nm, produced through mechanical exfoliation, is employed. Polarization-resolved X-ray excited optical luminescence (XEOL) measurements reveal a strong ultraviolet (UV) emission band at 3.4 eV, which is strongly polarized along the c-axis. Additionally, XEOL data show blue (2.9 eV) and deep-UV (3.8 eV) emissions. Notably, the deep-UV band, rarely reported in conventional photoluminescence studies, is attributed to the presence of Ga vacancies, as supported by first-principles calculations. Polarization-dependent X-ray absorption near-edge structure (XANES) spectroscopy allows one to probe the distinct symmetries of the b and c crystallographic planes. Furthermore, by combining XANES and XEOL, this study investigates the site-specific contributions of Ga ions to the luminescence process. These findings highlight the potential of beta-Ga2O3 nanomembranes as a robust material platform for developing polarization-sensitive devices. The pronounced anisotropy of beta-Ga2O3 causes orientation-dependent optoelectronic properties, making it a highly promising candidate for a wide range of advanced applications
Docta Complutense
Publicación Artículo científico (JournalArticle)

Micro-and nanocrystalline NiO synthesized by Joule heating and thermal oxidation methods: a comparative study

  • Ramos Ramos, Diego J.
  • Vásquez Villanueva, G. Cristian
  • Maestre Varea, David
The high stability and intrinsic p-type nature of nickel oxide (NiO) make it an interesting material for modern oxide-based technology microdevices. Nowadays, the industry demands more sustainable, highly efficient, and low-energy-consumption synthesis routes as an alternative to conventional methods that commonly involve high temperatures for long times or complex chemical routes. In this work, a fast, low-cost, and energy-saving synthesis based on the Joule heating (JH) process has been employed for the fabrication of micro- and nanocrystalline NiO. The as-grown NiO samples have been investigated as a function of the growth parameters, and special attention has been paid to the differences and similarities between microcrystals grown by JH or vapor-solid (VS) thermal treatments. In particular, Raman spectroscopy reveals that the JH process results in a very reproducible and controllable NiO microcrystalline structure as compared to VS regardless of the fast oxidation process. Cross-sectional analysis of the NiO grown by JH confirms the presence of inner/outer regions with variable microstructure, composition, and physical properties as a function of the different oxidation conditions promoted during the JH process. The mechanisms underlying the JH process have been discussed and compared with those related to the VS method.
Docta Complutense
Publicación Artículo científico (JournalArticle)

Additive manufacturing of 3D yttria-stabilized zirconia microarchitectures

  • Winczewski, J.P.
  • Zeiler, S.
  • Gabel, S.
  • Maestre Varea, David
  • Merle, B.
  • Gardeniers, J.G.E.
  • Arce, A. Susarrey
The additive manufacturing (AM) of yttria-stabilized zirconia (YSZ) microarchitectures with sub-micrometer precision via two-photon lithography (TPL), utilizing custom photoresin containing zirconium and yttrium monomers is investigated. YSZ 3D microarchitectures can be formed at low temperatures (600 ◦C). The low- temperature phase stabilization of ZrO2 doped with Y2O3 demonstrates that doping ZrO2 with ≈10 mol% Y2O3 stabilizes the c-ZrO2 phase. The approach does not utilize YSZ particles as additives. Instead, the crystallization of the YSZ phase is initiated after printing, i.e., during thermal processing in the air at 600 ◦C – 1200 ◦C for one and two hours. The YSZ microarchitectures are characterized in detail. This includes understanding the role of defect chemistry, which has been overlooked in TPL-enabled micro-ceramics. Upon UV excitation, defect- related yellowish-green emission is observed from YSZ microarchitectures associated with intrinsic and extrinsic centers, correlated with the charge compensation due to Y3+doping. The mechanical properties of the microarchitectures are assessed with manufactured micropillars. Micropillar compression yields the intrinsic mechanical strength of YSZ. The highest strength is observed for micropillars annealed at 600 ◦C, and this characteristic decreased with an increase in the annealing temperature. The deformation behavior gradually changes from ductile to brittle-like, correlating with the Hall–Petch strengthening mechanism
Docta Complutense
Publicación Artículo científico (JournalArticle)

Engineered optical and electronic properties in β-Ga_2O_3/SnO_2 nanowire networks

  • Dolado Fernández, Jaime José
  • Pérez Peinado, Paula
  • Carrasco Madrigal, Daniel
  • Martínez Casado, Ruth
  • Bonino, Valentina
  • Nogales Díaz, Emilio
  • Méndez Martín, María Bianchi
  • Martínez Criado, Gema
Integration of semiconductor nanowires is critical for developing scalable and versatile nanodevices, but challenges remain in tailoring optical emission, forming reliable p-n junctions, and ensuring consistent nanoscale interconnection. Here, we investigate Ga2O3/SnO2 multiwire architectures using synchrotron-based X-ray fluorescence (XRF), X-ray excited optical luminescence (XEOL), X-ray absorption near-edge spectroscopy (XANES), and first-principles simulations. We map dopant distribution, analyze nanoscale optical responses, and determine dopant atomic coordination. The central wire is predominantly Sn-doped Ga2O3, while crossed wires are Ga-doped SnO2. XEOL maps reveal a pronounced enhancement of the 3.5 eV ultraviolet emission in Ga2O3 at the junctions, enabling controlled optical modulation. XANES and ab initio calculations confirm that Sn and Ga dopants preferentially occupy octahedral sites, introducing donor levels in Ga2O3 and acceptor levels in SnO2. This research significantly advances our understanding of dopant effects in complex semiconductor nanowire systems, paving the way for controlled optical emissions in Ga2O3/SnO2 multiwire architectures.