Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 6
Encontrada(s) 1 página(s)

Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Tuning the out-of-plane magnetic textures of electrodeposited Ni90Fe10 thin films

  • Cotón, N.
  • Andrés, J. P.
  • Jaafar, M.
  • Begué, A.
  • Ranchal, R.
This study investigates the out-of-plane magnetization component of electrodeposited Ni90Fe10 thin films grown under different applied magnetic field conditions. The formation of stripe domains is gradual, as there is a thickness range in which the transcritical shape appears in the hysteresis loops, while only magnetic ripples are measured in the magnetic force microscopy images. For instance, samples deposited under the residual magnetic field generated by the switched-off magnetic stirrer exhibit the transcritical shape in the in-plane hysteresis loops at a thickness of 400 nm, even though corresponding magnetic force microscopy images do not reveal the presence of stripe domains. When a perpendicular magnetic field of 100 Oe is applied during growth, stripe domains become visible in microscopy images, along with the transcritical shape in the hysteresis loop at 400 nm. This implies that the critical thickness for stripe formation can be reduced by applying a perpendicular magnetic field during electrodeposition. We have experimentally confirmed that the larger the magnetic field applied in the out-of-plane direction during growth, the smaller the critical thickness. These results underscore the importance of controlling the external magnetic field during electrodeposition for more effective tuning of the magnetic textures in electrodeposited Ni90Fe10 films.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic anisotropy evolution with Fe content in electrodeposited Ni<sub>100-<i>x</i></sub>Fe<sub><i>x</i></sub> thin films

  • Begué, A.
  • Cotón, N.
  • Ranchal, R.
In this study, we have experimentally and theoretically determined how the magnetic anisotropy of Ni100−xFex thin films evolves as a function of the Fe content in electrodeposited samples. When the Fe content is below 12 at%, stripe domains are promoted once the thickness exceeds a critical value. For an Fe content of 7 at%, the transcritical shape is present in the hysteresis loop for a thickness of 600 nm. However, for compositions equal to or above 12 at%, we have not found evidence of stripe domains, as indicated by the absence of the transcritical shape in the hysteresis loops for layer thicknesses as high as 1 μm even if a magnetic field is applied perpendicular to the sample plane during growth. All the studied layers are polycrystalline with a 〈111〉 texture. The experimental results are understood in the framework of a theoretical model which considers different contributions to the magnetic anisotropy: magnetocrystalline, magnetoelastic, magnetostatic and from pairs. Out-of-plane anisotropy promoted by columnar growth has not been considered as the saccharine-based electrolyte used for the electrodeposition prevents it. In fact, the magnetic anisotropy related to pairs, which is not generally taken into account in models for Ni100−xFex, appears to play a crucial role in these thin films. Fitting of the experimental results to this model reveals that the local anisotropy generated by pairs can be as high as 3.30 × 106 J m−3. This theoretical and experimental combined investigation highlights the relevance of all these fundamental mechanisms for the understanding and tuning of magnetic materials.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetic Field Screening of 2D Materials Revealed by Magnetic Force Microscopy

  • Aldave, Diego A.
  • López-Polín, Guillermo
  • Calle, Esther
  • Begué, Adrián
  • Ranchal, Rocío
  • Martínez, Raúl
  • Bran, Cristina
  • Burzurí, Enrique
  • Gómez-Herrero, Julio
  • Ares, Pablo
  • Jaafar, Miriam
2D materials possess exceptional mechanical properties making them promising candidates for protecting nanostructures. However, the magnetic field screening properties of 2D materials are largely unexplored. Here it is used Magnetic Force Microscopy (MFM) to unveil the effects on the magnetic field of magnetic nanostructures when 2D materials are placed on top of them. It is demonstrated that while graphene exhibits a weak diamagnetic response due to its unique electronic structure around the Dirac point, the overall screening effect remains minimal (≈0.5% per layer). Conversely, graphene oxide (GO) and MoS2 show negligible response to the magnetic field, making them ideal for applications where preserving the original magnetic properties is crucial. These findings suggest that 2D materials can offer effective protection while minimally affecting the underlying magnetic functionalities, important for data storage technologies and spintronics.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Voltage-control of the in-plane magnetic anisotropy in hybrid magnetoelectric Ni<sub>90</sub>Fe<sub>10</sub>/BaTiO<sub>3</sub>(011) heterostructure

  • Begue, Adrian
  • Khaliq, Muhammad Waqas
  • Cotón, Noelia
  • Niño, Miguel Ángel
  • Foerster, Michael
  • Ranchal, Rocío
This study focuses on hybrid magnetoelectric Ni90Fe10/BaTiO3(011) heterostructures, which enable the control of the in-plane magnetization of the magnetostrictive layer through electric voltage. The heterostructure is both Pb- and rare-earth-free, thus enhancing environmental sustainability. We show that the BaTiO3(011) orientation enables higher deformations in the piezoelectric regime compared to the commonly studied (001) orientation. In the as-grown state, the electrodeposited 200 nm-thick Ni90Fe10 film presents uniaxial in-plane anisotropy aligned with the [100] in-plane crystallographic direction of the BaTiO3(011) substrate. X-ray magnetic circular dichroism photoemission electron microscopy images, along with hysteresis loops obtained by the magneto-optical Kerr effect, confirm the converse magnetoelectric coupling between Ni90Fe10 and BaTiO3(011). The obtained converse magnetoelectric coupling constant of 0.205 μs m−1 is significant considering it is achieved in the piezoelectric regime of the BaTiO3 substrate and using an electrodeposited magnetostrictive film, making this heterostructure more viable for future applications. This value represents an increase of more than double compared to that previously reported for Ni/BTO(001) and, to the best of our knowledge, is the first value reported for the BTO(011) orientation.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Magnetoacoustic waves in a highly magnetostrictive Fe72Ga28 thin film

  • Rovirola, Marc
  • Khaliq, M. Waqas
  • Casals, Blai
  • Begué, Adrian
  • Biskup, Neven
  • Coton, Noelia
  • Hernàndez, Joan Manel
  • Niño, Miguel Angel
  • Foerster, Michael
  • Hernández-Mínguez, Alberto
  • Ranchal, Rocío
  • Costache, Marius V.
  • García-Santiago, Antoni
  • Macià, Ferran
The interaction between surface acoustic waves and magnetization offers an efficient route for electrically controlling magnetic states. Here, we demonstrate the excitation of magnetoacoustic waves in galfenol thin films with a 28 at. % gallium composition, corresponding to the second magnetostrictive peak in bulk samples. We quantify the amplitude of the induced magnetization oscillations using magnetic imaging in an x-ray photoelectron microscope and estimate the dynamic magnetoelastic constants through micromagnetic simulations. Our findings demonstrate the potential of galfenol thin films for magnonic applications and reveal that, despite strong magnetoelastic coupling, magnetic interactions and spin-wave dispersion relations significantly influence the overall amplitude of magnetoacoustic waves.
Zaguán. Repositorio Digital de la Universidad de Zaragoza
Publicación Artículo científico (JournalArticle)

Voltage-controlled rotation of magnetic anisotropy in the Ni90Fe10/BaTiO3(001) heterostructure

  • Begué, A.
  • Khaliq, M. W.
  • Cotón, N.
  • Lorenzo-Feijoo, I.
  • Niño, M. A.
  • Foerster, M.
  • Ranchal, R.
In this work, we demonstrate the voltage control of magnetic anisotropy in a strain-mediated Ni90Fe10/BaTiO3(001) heterostructure. In the pristine state of the heterostructure, the magneto-optical Kerr effect measurements show a transcritical hysteresis loop for the Ni90Fe10 film, indicating a weak perpendicular anisotropy. This was further confirmed by X-ray magnetic circular dichroism – photoemission electron microscopy, revealing stripe domains in this film. X-ray diffraction analysis of the BaTiO3 substrate under varying electric fields was used to analyze the orientation of ferroelectric domains. These results indicated that BaTiO3 exhibits two distinct states depending on the applied electric field: one with domains aligned with the electric field and another with random domain orientation when the field is removed. After substrate poling, the Ni90Fe10 layer switches from weak perpendicular anisotropy to an in-plane uniaxial magnetic anisotropy, with the in-plane direction of anisotropy being controllable by 90° through an electric field. This effect is due to an efficient strain transfer from BaTiO3 to the Ni90Fe10 lattice, induced by ferroelectric polarization, as shown by XRD. Remarkably, this rotation of the magnetic anisotropy leads to an enhanced converse magnetoelectric coupling value of 1.43 μs m−1, surpassing previously reported values for other BaTiO3-based heterostructures by an order of magnitude. These results emphasize the potential of Ni90Fe10 alloys for next-generation magnetoelectric devices.