Pasar al contenido principal

MEJORA DE LA CALIDAD DE POTENCIA EN SISTEMAS DE POTENCIA REMOTOS SIN CONEXION A RED CON ELEVADA PENETRACION DE CONVERTIDORES ELECTRONICOS DE POTENCIA

PID2021-122835OB-C21

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSITAT POLITECNICA DE CATALUNYA

Resultados relacionados

Resultados totales (Incluyendo duplicados): 33
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Iterative Application of UMAP-Based Algorithms for Fully Synthetic Healthcare Tabular Data Generation

  • Lázaro, Carla
  • Angulo, Cecilio
Building on a previously developed partially synthetic data generation algorithm utilizing data visualization techniques, this study extends the novel algorithm to generate fully synthetic tabular healthcare data. In this enhanced form, the algorithm serves as an alternative to conventional methods based on Generative Adversarial Networks (GANs) or Variational Autoencoders (VAEs). By iteratively applying the original methodology, the adapted algorithm employs UMAP (Uniform Manifold Approximation and Projection), a dimensionality reduction technique, to validate generated samples through low-dimensional clustering. This approach has been successfully applied to three healthcare domains: prostate cancer, breast cancer, and cardiovascular disease. The generated synthetic data have been rigorously evaluated for fidelity and utility. Results show that the UMAP-based algorithm outperforms GAN- and VAE-based generation methods across different scenarios. In fidelity assessments, it achieved smaller maximum distances between the cumulative distribution functions of real and synthetic data for different attributes. In utility evaluations, the UMAP-based synthetic datasets enhanced machine learning model performance, particularly in classification tasks. In conclusion, this method represents a robust solution for generating secure, high-quality synthetic healthcare data, effectively addressing data scarcity challenges., This research was funded by the European Union Horizon Europe R&I program through the project FLUTE (Grant agreement no.: 101095382). It is also co-funded by the European Union–Next Generation EU funds, through the I+D+i PID2021-122835OBC21 research project ARTIFACTS (MCIN/AEI/10.13039/501000011033) and FEDER “Una manera de hacer Europa”., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Using UMAP for Partially Synthetic Healthcare Tabular Data Generation and Validation

  • Lázaro, Carla
  • Angulo, Cecilio
In healthcare, vast amounts of data are increasingly collected through sensors for smart health applications and patient monitoring or diagnosis. However, such medical data often comprise sensitive patient information, posing challenges regarding data privacy, and are resource-intensive to acquire for significant research purposes. In addition, the common case of lack of information due to technical issues, transcript errors, or differences between descriptors considered in different health centers leads to the need for data imputation and partial data generation techniques. This study introduces a novel methodology for partially synthetic tabular data generation, designed to reduce the reliance on sensor measurements and ensure secure data exchange. Using the UMAP (Uniform Manifold Approximation and Projection) visualization algorithm to transform the original, high-dimensional reference data set into a reduced-dimensional space, we generate and validate synthetic values for incomplete data sets. This approach mitigates the need for extensive sensor readings while addressing data privacy concerns by generating realistic synthetic samples. The proposed method is validated on prostate and breast cancer data sets, showing its effectiveness in completing and augmenting incomplete data sets using fully available references. Furthermore, our results demonstrate superior performance in comparison to state-of-the-art imputation techniques. This work makes a dual contribution by not only proposing an innovative method for synthetic data generation, but also studying and establishing a formal framework to understand and solve synthetic data generation and imputation problems in sensor-driven environments., This research was funded by the European Union Horizon Europe R&I program through the project FLUTE (Grant agreement no.: 101095382). It is also co-funded by the European Union–Next Generation EU funds, through the I+D+i PID2021-122835OBC21 research project ARTIFACTS (MCIN/AEI/10.13039/501000011033) and FEDER “Una manera de hacer Europa”., Peer reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Negative-sequence control to avoid voltage imbalance propagation across an inverter-based sslanded multi-microgrid

  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Chico Villegas, José Pascual|||0009-0006-4453-5121
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Borrell Sanz, Ángel
  • Duarte Mejía, Josué Neftalí|||0000-0002-9532-4491
c 2025 The Authors. This work is licensed under a Creative Commons Attribution 4.0 License. For more information, see https://creativecommons.org/licenses/by/4.0/, The problem of voltage imbalance propagation in an inverter-based islanded multi-microgrid consists of avoiding the propagation of the voltage imbalance generated within one microgrid to the remaining microgrids in the multi-microgrid system. Without the participation of the main grid, no previous studies have yet addressed this issue in the challenging scenario of islanding mode. The contribution of this paper is a negative-sequence control that solves the voltage imbalance propagation problem using the relative gain array method. The novelty and significance lie in the extension of the aforementioned method to dynamic systems described with models with complex-valued variables. The performance achieved with the developed method includes the elimination of the negative-sequence voltages at all the point-of-common-coupling nodes with an adequate distribution of inverter negative-sequence currents. Experimental results are obtained from a laboratory setup to validate the performance of the proposed control., This work was supported in part by MCIN/AEI/10.13039/501000011033, and in part by the FEDER “Una manera de hacer Europa” under Grant PID2021-122835OB-C21. Paper no. TSG00604-2024., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Improving voltage ride-through procedures in distributed generation systems by reinforcement learning

  • Fathollahi, Mohana|||0009-0009-5015-743X
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
  • Velasco García, Manel|||0000-0002-0764-3063
  • Martí Colom, Pau|||0000-0002-5189-0782
  • Angulo Bahón, Cecilio|||0000-0001-9589-8199
  • Hampton, Jerrad
During the last two decades, the operation of the electrical grid has undergone significant changes. This evolution is closely tied to the integration of power electronics into distributed generation systems, which led to increased utilization of renewable energy and as a consequence mitigating climate change by lowering emissions. On the other hand, artificial intelligence plays a considerable role in shaping the development and progress of various technologies, such as the electrical grid. This work presents a study for the application of Reinforcement Learning (RL) tools in distributed generation systems. The objective of using RL is to address voltage perturbations in real time. RL will be useful to maximize the resilience of the system in the event of short circuits of a short duration and minimize the risk of disconnect., This article is supported by the ’Siemens Energy AI Chair: Energy Sustainability for a Decarbonized Society 5.0’ (TSI-100930-2023-5), funded by the SEDIA, and co-funded by the European Union-Next Generation EU, and by I+D+i PID2021-122835OB-C21 research project through MCIN/AEI/10.13039/501000011033 and FEDER., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Active-power voltage-support for a microgrid under short-circuits, modelled in complex valued domain

  • Iñiguez Amigot, José Ignacio
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
  • Chico Villegas, José Pascual|||0009-0006-4453-5121
The growing number of electric vehicles (EVs) connected to the grid are a promising potential to support the overall system stability, known as vehicle to grid concept. During grid faults these vehicles can be seen as distributed dispatchable sources that can collaborate to the system restoration. In the case of islanded microgrids under a fault, electric vehicles can provide its stored energy in order to imitate the low voltage ride through protocols (LVRT) that are required to distributed generation systems connected to the main grid. The islanded microgrid tested here is composed of grid-forming voltage sources supplying different loads, some of them EVs. The proposal in this work is that, during a voltage sag caused by an overcurrent in the system, EVs must inject active power to support the voltage, instead of supplying reactive power as LVRT require. The theoretical reasoning of this new approach will be supported by a complete system modelling in the complex valued domain. Selected experimental results demonstrate the effectiveness of the control proposal., This publication is part of the project I+D+i PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Agrixel. AI-based service standard for agricultural data in agri-food use cases

  • Eeckhout Alsinet, Joan van
  • Dimic, Miona|||0009-0008-1869-3585
  • Angulo Bahón, Cecilio|||0000-0001-9589-8199
We introduce a new interoperable geographic standard called agrixel, which employs a unique and innovative data processing methodology—similar to pixels in computer vision or tokens in language processing—leveraging computational power and machine learning in shared data spaces. Focused on AI-driven services for the agri-food sector and founded in a defined ontology, it offers a service portfolio for the sector itself, its externalities, and the circularity of its products. The agrixel standard ensures findable, accessible, interoperable, and reusable (FAIR) data, compatible with existing solutions. It supports multiple data layers, enabling extensions to externalities, such as carbon footprint, energy use, water management, logistics, and transport—enhancing efficiency in agri-food production and consumption., Joan van Eeckhout and Miona Dimic acknowledge the support of the Spanish Ministry for Digital Transformation and Public Service through the Secretariat of State for Digitalisation and Artificial Intelligence (project Agrixel ES, TSI-100121-2024-019) as part of the “Plan to Promote Sectoral Data Spaces” under the Recovery, Transformation and Resilience Plan, financed by the European Union – NextGenerationEU. Prof. Cecilio Angulo is also acknowledging co-funds from the European Union – NextGenerationEU, through the I+D+i PID2021-122835OBC21 research project ARTIFACTS (MCIN/AEI/10.13039/501000011033) and FEDER “Una manera de hacer Europa”., Peer Reviewed, 2 - Fam zero, 12 - Producció i Consum Responsables, 13 - Acció per al Clima
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A sliding-mode control in a new reference frame for three-phase UPFR with extended control range

  • Chico Villegas, José Pascual|||0009-0006-4453-5121
  • Guzmán Solà, Ramon|||0000-0002-4386-5800
  • García de Vicuña Muñoz de la Nava, José Luis|||0000-0003-2947-849X
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Borrell Sanz, Ángel
This article presents a new switching strategy for a unity power factor rectifier (UPFR) using sliding-mode control (SMC). The traditional SMC in the natural frame suffers from a cross-coupling problem among controllers due to the neutral point voltage. To address this issue, a nonlinear transformation is applied to obtain the voltages and currents in a new 2-D reference frame. Based on the transformed variables, a nonlinear model is derived, and two different sliding-mode surfaces are designed using hysteresis band comparators. The nonlinear transformation is based on a switching strategy that not only avoids the cross-coupling problem but also injects a third harmonic in the control signal, providing an extended control range. As a result, a SMC is designed, providing relevant properties such as output voltage robustness, fast transient response against sudden load changes, and grid-voltage sags. Experimental results are provided to validate the theoretical contributions of this article., This work was supported in part by I+D+i PID2021-122835OB-C21 research project through MCIN/AEI/ 10.13039/501000011033 and FEDER “Una manera de hacer Europa.”, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Distributed generator with virtual grid-based remote voltage unbalance compensation and maximum current limiting

  • Iñiguez Amigot, José Ignacio
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper proposes a control scheme for a distributed generator to eliminate the negative-sequence voltage at a remote point of the power system based on the virtual grid concept. The proposed control includes an additional algorithm for limiting the maximum current of the three-phase inverter. This protects the inverter from overcurrent and thus prevents it from being damaged. The aforementioned properties are achieved through the use of both local voltage and current measurements, as well as the remote negative-sequence voltage, which is received by the communication system. The static and dynamic characteristics of the proposed control are validated by selected experimental results obtained in a laboratory setting. © 2024 IEEE., This publication is part of the project PID2021-1228350BC21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Eurupa"., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

Model predictive control for an LCL voltage source inverter with active damping capability and current limitation

  • Chico Villegas, José Pascual|||0009-0006-4453-5121
  • Guzmán Solà, Ramon|||0000-0002-4386-5800
  • García de Vicuña Muñoz de la Nava, José Luis|||0000-0003-2947-849X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Komurcugil, Hasan
This paper presents a model predictive control (MPC) for a grid-connected voltage source inverter (VSI) with current limitation. The control algorithm is performed in the dq frame to obtain the amplitude of the inverter currents. First, a state observer with a reduced model of the converter is used to estimate the inverter current and perform active damping. Then, an MPC algorithm is used to regulate the currents to a desired reference but with the advantage that these currents can be limited to a maximum value by introducing a constraint in the cost function instead of clipping the current of the inverter above a maximum current. This controller has been tested experimentally under a current reference step change and without a physical damping resistor., This publication is part of the project I+D+i PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Negative-sequence virtual circuit breaker in islanded inverter-based microgrids

  • Ghodrati, Mojtaba
  • Borrell Sanz, Ángel
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Velasco García, Manel|||0000-0002-0764-3063
Unbalanced loads in islanded inverter-based microgrids induce voltage and current imbalances, posing significant challenges to the operation of critical equipment and sensitive loads. To address this issue, conventional circuit breakers, strategically placed between microgrids, play a key role in fault isolation during unbalanced conditions. However, they exhibit weaknesses in effectively addressing power quality issues, frequency variations, and power supply interruptions to specific loads. To solve these limitations, this paper introduces the new concept of negative-sequence virtual circuit breaker. Microgrid inverters are responsible for implementing this concept, which consists of eliminating negative-sequence voltages and currents at the point of-common-coupling between microgrids without altering positive-sequence voltages and currents. This last issue allows the entire electrical system to operate on a single frequency, guaranteeing the loads' supply. The compensators responsible for implementing the proposed concept are unilateral bandpass filters with complex coefficients. The primary advantage of these compensators over conventional integral compensators is their ability to offer plug-and-play operation. The effectiveness of the proposed concept has been verified through experimental tests in a laboratory setup., This work was supported by the I+D+i PID2021-122835OB-C21 research project, financed by MCIN/AEI/ 10.13039/501000011033 and FEDER “Una manera de hacer Europa., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Robust voltage unbalance control with inherent current sharing in grid-connected microgrids

  • Duarte Mejía, Josué Neftalí|||0000-0002-9532-4491
  • Velasco García, Manel|||0000-0002-0764-3063
  • Martí Colom, Pau|||0000-0002-5189-0782
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Grid-connected ac microgrids (MG) are commonly exposed to voltage quality deterioration due to the presence of voltage imbalance. This article presents a control strategy that enables MG grid-feeding inverters (interfacing distributed generation units) to compensate for the voltage unbalance at a given remote node of the MG where for example a sensitive load is likely to be damaged. Each inverter is equipped with a new controller whose operation 1) allows to contribute in the control of the imbalance by only using a measure of the negative-sequence voltage at the remote node while 2) ensuring a fairly redistribution of the control effort among the participating inverters in terms of an inherent negative-sequence current sharing functionality. Since both control objectives are achieved without requiring the collaboration among the participating inverters, the presented solution offers an inherent robustness not found in previous state-of-the-art voltage unbalance control strategies. The new control strategy is accompanied by a controller parameter design receipt, and it is complemented by a formal analysis that permits evaluating how MG modeling errors and uncertainties affect stability and performance. Laboratory experimental results corroborate the properties of the presented control., This work was supported in part by the I+D+i PID2021-122835OB-C21 research project, financed by MCIN/AEI/10.13039/501000011033 and in part by the FEDER “Una manera de hacer Europa.”, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Improving voltage support in islanded AC microgrids during unbalanced short-circuit faults

  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Borrell Sanz, Ángel
  • Duarte Mejía, Josué Neftali
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In the event of a short-circuit fault in an islanded ac microgrid, grid-forming power inverters activate a resistive virtual impedance to protect themselves against over-current, whereas grid-feeding power inverters are tasked with providing voltage support. In this scenario, the sequence impedances that are responsible for voltage support exhibit significant variability depending on the values of both the virtual and short-circuit impedances. State-of-the-art control schemes do not take this variation into account, resulting in voltage support that could be enhanced. This article presents a control scheme designed for grid-feeding inverters that improve voltage support during unbalanced short-circuit faults. The scheme is based on an online measurement of the sequence impedances and the selection of the most appropriate current injection technique for voltage support using the measured impedance values. A theoretical analysis is also included, which was performed to verify the stability of the microgrid with the proposed control. Finally, experimental results from a laboratory microgrid are presented for validation purposes., This work was supported in part by the I+D+i PID2021-122835OB-C21 research project under Grant MCIN/AEI/10.13039/501000011033 and in part by FEDER “Una manera de hacer Europa”., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

A novel complex power sharing based on sliding mode control for Islanded AC microgrids

  • Alfaro Aragón, Carlos Arturo|||0000-0002-3202-7430
  • Guzmán Solà, Ramon|||0000-0002-4386-5800
  • Camacho Santiago, Antonio|||0000-0002-0673-6452
  • Borrell Sanz, Ángel
  • García de Vicuña Muñoz de la Nava, José Luis|||0000-0003-2947-849X
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This article introduces a novel complex sliding-mode control strategy for grid-forming inverters in islanded microgrids. This approach offers an alternative to the traditional hierarchical control strategies that typically rely on droop control, communication-based secondary controls, and virtual impedance methods. To develop the complex sliding-mode control, we propose a complex phasor model for grid-forming inverters, presenting an alternative to the conventional power flow model used in ac microgrids. This model enables the derivation of a linear complex dynamic model for grid-forming inverters connected to a microgrid, based on the apparent power differential equation, thereby simplifying the control law design process. The proposed control system features three key advantages: first, it ensures precise active and reactive power sharing across both resistive and inductive power lines, eliminating the need for virtual impedance; second, it exhibits high robustness against line impedance mismatches and external disturbances, including load changes and the connection and disconnection of inverters; and third, it eliminates the requirement for secondary frequency control. Experimental results validate the effectiveness of the proposed control strategy., This work was supported in part by I+D+i PID2021-122835OB-C21 research project through MCIN/AEI/ 10.13039/501000011033 and FEDER “Una manera de hacer Europa.”, Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Symbolic and user-friendly geometric algebra routines (SUGAR) for computations in Matlab

  • Velasco García, Manel|||0000-0002-0764-3063
  • Zaplana Agut, Isiah|||0000-0002-0862-3240
  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Martí Colom, Pau|||0000-0002-5189-0782
Geometric Algebra (GA) provides a unified, compact mathematical framework for geometric computing, simplifying relations typically handled with more complex tools like matrix multiplication. In fields like robotics, GA replaces conventional coordinate-based approaches with the multiplication of special elements called rotors, offering greater efficiency. Despite its advantages, GA’s complexity and the lack of symbolic tools hinder its broader adoption among applied mathematicians and engineers. To address this, this article introduces Symbolic and User-friendly Geometric Algebra Routines (SUGAR), an open source Matlab toolbox. SUGAR streamlines GA usage in Matlab through a collection of user-friendly functions that support both numeric and symbolic computations, even in high-dimensional algebras. Designed for applied mathematics and engineering, it enables intuitive manipulation of geometric elements and transformations in two- and three-dimensional projective and conformal GAs, consistent with established computational methods. Moreover, SUGAR manages multivector functions such as exponential, logarithmic, sinusoidal, and cosine operations, enhancing its applicability in domains like robotics, control systems, and power electronics. Finally, this article also presents three validation examples across these fields, showcasing SUGAR’s practical utility in solving real-world engineering and applied mathematics problems., The work of I. Zaplana was partially supported by the Spanish National Project PID2020-114819GB-I00 funded by MI- CIU/AEI/10.13039/501100011033 and by the Generalitat de Catalunya through the Project 2021 SGR 00375. The work of A. Dòria-Cerezo was partially supported by the Spanish National Project PID2021-122821NB-I00 funded by MI- CIU/AEI/10.13039/501100011033 and ERDF/EU and by the Generalitat de Catalunya through the Project 2021 SGR 00376. M. Velasco, J. Duarte, and P. Martí were partially supported by the Spanish National Project PID2021-122835OB-C21 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Introducing modeling, analysis, and control of three-phase electrical systems using geometric algebra

  • Velasco García, Manel|||0000-0002-0764-3063
  • Zaplana Agut, Isiah|||0000-0002-0862-3240
  • Dòria Cerezo, Arnau|||0000-0001-9352-066X
  • Duarte Mejía, Josué Neftali
  • Martí Colom, Pau|||0000-0002-5189-0782
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This article introduces a novel framework based on geometric algebra (GA) for the modeling, analysis, and control of three-phase electrical systems, with a focus on unbalanced scenarios. The proposed approach utilizes GA to represent these systems using simplified single-input/single-output (SISO) models, significantly reducing their mathematical complexity while maintaining accuracy. The framework introduces GA-valued transfer functions (GA-TFs), enabling the extension of well-established multivariable (MIMO) techniques, such as Youla-Kucera parameterization, into the GA domain as an illustrative example. This demonstrates the adaptability of classical tools within the new algebra. The validity and potential of the approach are showcased through numerical examples of balanced and unbalanced systems, as well as physical implementations in a laboratory setup. The results confirm that GA provides a robust and scalable foundation for simplifying the analysis and control of three-phase systems, paving the way for future theoretical and practical advancements., Received 13 June 2024; revised 16 September 2024, 9 December 2024, and 31 January 2025; accepted 8 March 2025. Date of publication 2 May 2025; date of current version 2 October 2025. The work of Manel Velasco, Josue Duarte, and Pau Mart ı was supported in part by Spanish National Project PID2021-122835OB-C21 under Grant MICIU/AEI/10.13039/501100011033; Isiah Zaplana was supported in part by Spanish National Project PID2020-114819GB-I00 under Grant MICIU/AEI/10.13039/501100011033; Arnau Doria-Cerezo was supported in part by Spanish National Project PID2021-122821NB-I00 under Grant MICIU/AEI/10.13039/501100011033 and ERDF/EU, and in part by the Generalitat de Catalunya through the Project 2021 SGR 00376. (Corresponding author: Manel Velasco.), Peer Reviewed
UPCommons. Portal del coneixement obert de la UPC
Publicación Contribución de congreso (ConferenceOutput)

A sliding mode control for a grid-connected three-phase voltage source inverter based on a new reference frame

  • Chico Villegas, José Pascual|||0009-0006-4453-5121
  • Guzmán Solà, Ramon|||0000-0002-4386-5800
  • García de Vicuña Muñoz de la Nava, José Luis|||0000-0003-2947-849X
  • Miret Tomàs, Jaume|||0000-0003-1175-4900
  • Castilla Fernández, Miguel|||0000-0002-3284-860X
  • Borrell Sanz, Ángel
This paper presents a switching strategy for a grid-connected voltage source inverter (VSI) using sliding mode control (SMC). The conventional SMC suffers from sliding losses due to the cross-coupling among controllers by the neutral point voltage expression. This issue can be addressed by using the switching technique to obtain the voltage and currents in a new reference frame through a non-linear transformation. In this frame, a decoupled non-linear model of the VSI is derived, and two sliding mode controllers are designed using hysteresis band comparators. The switching strategy not only avoids sliding losses but also increases the control range of the converter by introducing a third harmonic by the control signal. Simulation results using Matlab Simulink are provided to validate the robustness of the proposed controller., This publication is part of the project I+D+i PID2021-122835OB-C21, f inanced by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Remote multi-nodal voltage unbalance compensation in islanded AC microgrids

  • Duarte Mejía, Josué Neftalí
  • Velasco García, Manel
  • Martí Colom, Pau
  • Borrell Sanz, Ángel
  • Castilla Fernández, Miguel
Microgrids (MG) are exposed to voltage quality deterioration due to the presence of voltage unbalance. To deal with this problem, existing solutions based on Distributed Generation (DG) units interfaced by power electronics offer two type of strategies for voltage unbalance compensation depending on whether the compensation is performed at one remote node or at multiple local nodes. The first type is limited to a single node, and the second type is limited to apply at the DG units output (locally). This paper presents a multi nodal control scheme where DGs can compensate for voltage unbalance at multiple remote nodes of the MG, thus overcoming both state-of-the-art strategies limitations. In particular, negative-sequence voltage is eliminated at as many remote nodes as the number of available DG's. A systematic approach for the multiple-input/multiple-output (MIMO) nature of the problem is presented covering three aspects. First, a square MIMO control strategy is established and a feasibility test is derived to assess whether the problem can be solved. Second, the cross-coupling interaction between the multiple controllers is minimized by optimally selecting which DGs will contribute to mitigate the remote unbalances. Third, stability and transient dynamics are analyzed. Laboratory experimental results corroborate the control performance., This work was supported by I+D+i PID2021-122835OB-C21 research project, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Introducing modeling, analysis, and control of three-phase electrical systems using geometric algebra

  • Velasco García, Manel
  • Zaplana Agut, Isiah
  • Dòria Cerezo, Arnau
  • Duarte Mejía, Josué Neftali
  • Martí Colom, Pau
© 2025 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This article introduces a novel framework based on geometric algebra (GA) for the modeling, analysis, and control of three-phase electrical systems, with a focus on unbalanced scenarios. The proposed approach utilizes GA to represent these systems using simplified single-input/single-output (SISO) models, significantly reducing their mathematical complexity while maintaining accuracy. The framework introduces GA-valued transfer functions (GA-TFs), enabling the extension of well-established multivariable (MIMO) techniques, such as Youla-Kucera parameterization, into the GA domain as an illustrative example. This demonstrates the adaptability of classical tools within the new algebra. The validity and potential of the approach are showcased through numerical examples of balanced and unbalanced systems, as well as physical implementations in a laboratory setup. The results confirm that GA provides a robust and scalable foundation for simplifying the analysis and control of three-phase systems, paving the way for future theoretical and practical advancements., Received 13 June 2024; revised 16 September 2024, 9 December 2024, and 31 January 2025; accepted 8 March 2025. Date of publication 2 May 2025; date of current version 2 October 2025. The work of Manel Velasco, Josue Duarte, and Pau Mart ı was supported in part by Spanish National Project PID2021-122835OB-C21 under Grant MICIU/AEI/10.13039/501100011033; Isiah Zaplana was supported in part by Spanish National Project PID2020-114819GB-I00 under Grant MICIU/AEI/10.13039/501100011033; Arnau Doria-Cerezo was supported in part by Spanish National Project PID2021-122821NB-I00 under Grant MICIU/AEI/10.13039/501100011033 and ERDF/EU, and in part by the Generalitat de Catalunya through the Project 2021 SGR 00376. (Corresponding author: Manel Velasco.), Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A novel complex power sharing based on sliding mode control for Islanded AC microgrids

  • Alfaro Aragón, Carlos Arturo
  • Guzmán Solà, Ramon
  • Camacho Santiago, Antonio
  • Borrell Sanz, Ángel
  • García de Vicuña Muñoz de la Nava, José Luis
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This article introduces a novel complex sliding-mode control strategy for grid-forming inverters in islanded microgrids. This approach offers an alternative to the traditional hierarchical control strategies that typically rely on droop control, communication-based secondary controls, and virtual impedance methods. To develop the complex sliding-mode control, we propose a complex phasor model for grid-forming inverters, presenting an alternative to the conventional power flow model used in ac microgrids. This model enables the derivation of a linear complex dynamic model for grid-forming inverters connected to a microgrid, based on the apparent power differential equation, thereby simplifying the control law design process. The proposed control system features three key advantages: first, it ensures precise active and reactive power sharing across both resistive and inductive power lines, eliminating the need for virtual impedance; second, it exhibits high robustness against line impedance mismatches and external disturbances, including load changes and the connection and disconnection of inverters; and third, it eliminates the requirement for secondary frequency control. Experimental results validate the effectiveness of the proposed control strategy., This work was supported in part by I+D+i PID2021-122835OB-C21 research project through MCIN/AEI/ 10.13039/501000011033 and FEDER “Una manera de hacer Europa.”, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Distributed generator with virtual grid-based remote voltage unbalance compensation and maximum current limiting

  • Iñiguez Amigot, José Ignacio
  • Miret Tomàs, Jaume
  • Camacho Santiago, Antonio
  • Castilla Fernández, Miguel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., This paper proposes a control scheme for a distributed generator to eliminate the negative-sequence voltage at a remote point of the power system based on the virtual grid concept. The proposed control includes an additional algorithm for limiting the maximum current of the three-phase inverter. This protects the inverter from overcurrent and thus prevents it from being damaged. The aforementioned properties are achieved through the use of both local voltage and current measurements, as well as the remote negative-sequence voltage, which is received by the communication system. The static and dynamic characteristics of the proposed control are validated by selected experimental results obtained in a laboratory setting. © 2024 IEEE., This publication is part of the project PID2021-1228350BC21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Eurupa"., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Improving voltage ride-through procedures in distributed generation systems by reinforcement learning

  • Fathollahi, Mohana
  • Camacho Santiago, Antonio
  • Velasco García, Manel
  • Martí Colom, Pau
  • Angulo Bahón, Cecilio
  • Hampton, Jerrad
During the last two decades, the operation of the electrical grid has undergone significant changes. This evolution is closely tied to the integration of power electronics into distributed generation systems, which led to increased utilization of renewable energy and as a consequence mitigating climate change by lowering emissions. On the other hand, artificial intelligence plays a considerable role in shaping the development and progress of various technologies, such as the electrical grid. This work presents a study for the application of Reinforcement Learning (RL) tools in distributed generation systems. The objective of using RL is to address voltage perturbations in real time. RL will be useful to maximize the resilience of the system in the event of short circuits of a short duration and minimize the risk of disconnect., This article is supported by the ’Siemens Energy AI Chair: Energy Sustainability for a Decarbonized Society 5.0’ (TSI-100930-2023-5), funded by the SEDIA, and co-funded by the European Union-Next Generation EU, and by I+D+i PID2021-122835OB-C21 research project through MCIN/AEI/10.13039/501000011033 and FEDER., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

An experimental approach for secondary consensus control tuning for inverter-based islanded microgrids

  • de Doile, Gabriel Nasser Doyle
  • Balestrassi, Pedro Paulo
  • Castilla Fernández, Miguel
  • Zambroni de Souza, Antonio Carlos
  • Miret Tomàs, Jaume
A microgrid is a group of interconnected loads and distributed energy resources that can fill the gap between the dependence on a bulk power grid and the transition to renewable energies. The islanded mode presents itself as the most interesting scenario, when local controllers should maintain the power quality standards based on several parameters. A tool specifically focused on the process of parameter tuning of the secondary consensus-based control for inverter-based islanded microgrids was proposed in this paper. One often-quoted drawback in this process is the great number of parameters that must be tuned, even for a very simple microgrid structure. To manage such a large number of parameters, the design of experiments was used in this study. The main motivation for this work was to present an optimized way to define the correct parameters for the secondary consensus control for inverter-based islanded microgrids. The study shows how experimental design methodology can be an efficient tool to tune microgrid parameters, which are typically multi-objective-based experiments. From the results, it is correct to state that the design of experiments is able to reach the optimal setting with a minimal number of experiments, which would be almost impossible to obtain with the trial-and-error method., This work was supported by the Brazilian agencies of the Council for Scientific and Technological Development (CNPq), Coordination for the Improvement of Higher Education Personnel (CAPES), and Research Support Foundation of the Minas Gerais State (FAPEMIG). This publication is part of the R&D project PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/ 501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

A sliding mode control for a grid-connected three-phase voltage source inverter based on a new reference frame

  • Chico Villegas, José Pascual
  • Guzmán Solà, Ramon
  • García de Vicuña Muñoz de la Nava, José Luis
  • Miret Tomàs, Jaume
  • Castilla Fernández, Miguel
  • Borrell Sanz, Ángel
This paper presents a switching strategy for a grid-connected voltage source inverter (VSI) using sliding mode control (SMC). The conventional SMC suffers from sliding losses due to the cross-coupling among controllers by the neutral point voltage expression. This issue can be addressed by using the switching technique to obtain the voltage and currents in a new reference frame through a non-linear transformation. In this frame, a decoupled non-linear model of the VSI is derived, and two sliding mode controllers are designed using hysteresis band comparators. The switching strategy not only avoids sliding losses but also increases the control range of the converter by introducing a third harmonic by the control signal. Simulation results using Matlab Simulink are provided to validate the robustness of the proposed controller., This publication is part of the project I+D+i PID2021-122835OB-C21, f inanced by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Symbolic and user-friendly geometric algebra routines (SUGAR) for computations in Matlab

  • Velasco García, Manel
  • Zaplana Agut, Isiah
  • Dòria Cerezo, Arnau
  • Martí Colom, Pau
Geometric Algebra (GA) provides a unified, compact mathematical framework for geometric computing, simplifying relations typically handled with more complex tools like matrix multiplication. In fields like robotics, GA replaces conventional coordinate-based approaches with the multiplication of special elements called rotors, offering greater efficiency. Despite its advantages, GA’s complexity and the lack of symbolic tools hinder its broader adoption among applied mathematicians and engineers. To address this, this article introduces Symbolic and User-friendly Geometric Algebra Routines (SUGAR), an open source Matlab toolbox. SUGAR streamlines GA usage in Matlab through a collection of user-friendly functions that support both numeric and symbolic computations, even in high-dimensional algebras. Designed for applied mathematics and engineering, it enables intuitive manipulation of geometric elements and transformations in two- and three-dimensional projective and conformal GAs, consistent with established computational methods. Moreover, SUGAR manages multivector functions such as exponential, logarithmic, sinusoidal, and cosine operations, enhancing its applicability in domains like robotics, control systems, and power electronics. Finally, this article also presents three validation examples across these fields, showcasing SUGAR’s practical utility in solving real-world engineering and applied mathematics problems., The work of I. Zaplana was partially supported by the Spanish National Project PID2020-114819GB-I00 funded by MI- CIU/AEI/10.13039/501100011033 and by the Generalitat de Catalunya through the Project 2021 SGR 00375. The work of A. Dòria-Cerezo was partially supported by the Spanish National Project PID2021-122821NB-I00 funded by MI- CIU/AEI/10.13039/501100011033 and ERDF/EU and by the Generalitat de Catalunya through the Project 2021 SGR 00376. M. Velasco, J. Duarte, and P. Martí were partially supported by the Spanish National Project PID2021-122835OB-C21 funded by MICIU/AEI/10.13039/501100011033., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving voltage support in islanded AC microgrids during unbalanced short-circuit faults

  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • Borrell Sanz, Ángel
  • Duarte Mejía, Josué Neftali
  • Camacho Santiago, Antonio
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes, creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., In the event of a short-circuit fault in an islanded ac microgrid, grid-forming power inverters activate a resistive virtual impedance to protect themselves against over-current, whereas grid-feeding power inverters are tasked with providing voltage support. In this scenario, the sequence impedances that are responsible for voltage support exhibit significant variability depending on the values of both the virtual and short-circuit impedances. State-of-the-art control schemes do not take this variation into account, resulting in voltage support that could be enhanced. This article presents a control scheme designed for grid-feeding inverters that improve voltage support during unbalanced short-circuit faults. The scheme is based on an online measurement of the sequence impedances and the selection of the most appropriate current injection technique for voltage support using the measured impedance values. A theoretical analysis is also included, which was performed to verify the stability of the microgrid with the proposed control. Finally, experimental results from a laboratory microgrid are presented for validation purposes., This work was supported in part by the I+D+i PID2021-122835OB-C21 research project under Grant MCIN/AEI/10.13039/501000011033 and in part by FEDER “Una manera de hacer Europa”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

A sliding-mode control in a new reference frame for three-phase UPFR with extended control range

  • Chico Villegas, José Pascual
  • Guzmán Solà, Ramon
  • García de Vicuña Muñoz de la Nava, José Luis
  • Castilla Fernández, Miguel
  • Borrell Sanz, Ángel
This article presents a new switching strategy for a unity power factor rectifier (UPFR) using sliding-mode control (SMC). The traditional SMC in the natural frame suffers from a cross-coupling problem among controllers due to the neutral point voltage. To address this issue, a nonlinear transformation is applied to obtain the voltages and currents in a new 2-D reference frame. Based on the transformed variables, a nonlinear model is derived, and two different sliding-mode surfaces are designed using hysteresis band comparators. The nonlinear transformation is based on a switching strategy that not only avoids the cross-coupling problem but also injects a third harmonic in the control signal, providing an extended control range. As a result, a SMC is designed, providing relevant properties such as output voltage robustness, fast transient response against sudden load changes, and grid-voltage sags. Experimental results are provided to validate the theoretical contributions of this article., This work was supported in part by I+D+i PID2021-122835OB-C21 research project through MCIN/AEI/ 10.13039/501000011033 and FEDER “Una manera de hacer Europa.”, Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Robust voltage unbalance control with inherent current sharing in grid-connected microgrids

  • Duarte Mejía, Josué Neftalí
  • Velasco García, Manel
  • Martí Colom, Pau
  • Camacho Santiago, Antonio
  • Castilla Fernández, Miguel
© 2024 IEEE. Personal use of this material is permitted. Permission from IEEE must be obtained for all other uses, in any current or future media, including reprinting/republishing this material for advertising or promotional purposes,creating new collective works, for resale or redistribution to servers or lists, or reuse of any copyrighted component of this work in other works., Grid-connected ac microgrids (MG) are commonly exposed to voltage quality deterioration due to the presence of voltage imbalance. This article presents a control strategy that enables MG grid-feeding inverters (interfacing distributed generation units) to compensate for the voltage unbalance at a given remote node of the MG where for example a sensitive load is likely to be damaged. Each inverter is equipped with a new controller whose operation 1) allows to contribute in the control of the imbalance by only using a measure of the negative-sequence voltage at the remote node while 2) ensuring a fairly redistribution of the control effort among the participating inverters in terms of an inherent negative-sequence current sharing functionality. Since both control objectives are achieved without requiring the collaboration among the participating inverters, the presented solution offers an inherent robustness not found in previous state-of-the-art voltage unbalance control strategies. The new control strategy is accompanied by a controller parameter design receipt, and it is complemented by a formal analysis that permits evaluating how MG modeling errors and uncertainties affect stability and performance. Laboratory experimental results corroborate the properties of the presented control., This work was supported in part by the I+D+i PID2021-122835OB-C21 research project, financed by MCIN/AEI/10.13039/501000011033 and in part by the FEDER “Una manera de hacer Europa.”, Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Active-power voltage-support for a microgrid under short-circuits, modelled in complex valued domain

  • Iñiguez Amigot, José Ignacio
  • Miret Tomàs, Jaume
  • Camacho Santiago, Antonio
  • Chico Villegas, José Pascual
The growing number of electric vehicles (EVs) connected to the grid are a promising potential to support the overall system stability, known as vehicle to grid concept. During grid faults these vehicles can be seen as distributed dispatchable sources that can collaborate to the system restoration. In the case of islanded microgrids under a fault, electric vehicles can provide its stored energy in order to imitate the low voltage ride through protocols (LVRT) that are required to distributed generation systems connected to the main grid. The islanded microgrid tested here is composed of grid-forming voltage sources supplying different loads, some of them EVs. The proposal in this work is that, during a voltage sag caused by an overcurrent in the system, EVs must inject active power to support the voltage, instead of supplying reactive power as LVRT require. The theoretical reasoning of this new approach will be supported by a complete system modelling in the complex valued domain. Selected experimental results demonstrate the effectiveness of the control proposal., This publication is part of the project I+D+i PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Negative-sequence control to avoid voltage imbalance propagation across an inverter-based sslanded multi-microgrid

  • Castilla Fernández, Miguel
  • Chico Villegas, José Pascual
  • Miret Tomàs, Jaume
  • Borrell Sanz, Ángel
  • Duarte Mejía, Josué Neftalí
c 2025 The Authors. This work is licensed under a Creative Commons Attribution 4.0 License. For more information, see https://creativecommons.org/licenses/by/4.0/, The problem of voltage imbalance propagation in an inverter-based islanded multi-microgrid consists of avoiding the propagation of the voltage imbalance generated within one microgrid to the remaining microgrids in the multi-microgrid system. Without the participation of the main grid, no previous studies have yet addressed this issue in the challenging scenario of islanding mode. The contribution of this paper is a negative-sequence control that solves the voltage imbalance propagation problem using the relative gain array method. The novelty and significance lie in the extension of the aforementioned method to dynamic systems described with models with complex-valued variables. The performance achieved with the developed method includes the elimination of the negative-sequence voltages at all the point-of-common-coupling nodes with an adequate distribution of inverter negative-sequence currents. Experimental results are obtained from a laboratory setup to validate the performance of the proposed control., This work was supported in part by MCIN/AEI/10.13039/501000011033, and in part by the FEDER “Una manera de hacer Europa” under Grant PID2021-122835OB-C21. Paper no. TSG00604-2024., Peer Reviewed, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Model predictive control for an LCL voltage source inverter with active damping capability and current limitation

  • Chico Villegas, José Pascual
  • Guzmán Solà, Ramon
  • García de Vicuña Muñoz de la Nava, José Luis
  • Miret Tomàs, Jaume
  • Castilla Fernández, Miguel
  • Komurcugil, Hasan
This paper presents a model predictive control (MPC) for a grid-connected voltage source inverter (VSI) with current limitation. The control algorithm is performed in the dq frame to obtain the amplitude of the inverter currents. First, a state observer with a reduced model of the converter is used to estimate the inverter current and perform active damping. Then, an MPC algorithm is used to regulate the currents to a desired reference but with the advantage that these currents can be limited to a maximum value by introducing a constraint in the cost function instead of clipping the current of the inverter above a maximum current. This controller has been tested experimentally under a current reference step change and without a physical damping resistor., This publication is part of the project I+D+i PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Peer Reviewed, Postprint (author's final draft)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Improving voltage imbalance in inverter-based islanded microgrids during line-to-line short circuits

  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • García de Vicuña Muñoz de la Nava, José Luis
  • Borrell Sanz, Ángel
  • Alfaro Aragón, Carlos Arturo
Line-to-line short circuits are the transient disturbances that cause the highest currents as well as the largest voltage imbalances in inverter-based microgrids. This paper presents a control scheme for grid-forming inverters in islanded microgrids that limits the current to a safe value during these types of short circuits while providing a lower voltage imbalance compared to state-of-the-art current limiting techniques. This control scheme is based on reducing both the amplitude of the reference voltage with the maximum amplitude of the reference current and the instantaneous reference voltage with only the inductive component of the virtual impedance. The combination of these two control actions provides low voltage imbalance, as the theoretical and experimental studies reveal. This voltage imbalance improvement is the main contribution of this paper and is maintained when the microgrid supplies linear and non-linear loads. In the theoretical study, the paper includes control design guidelines to satisfy static and dynamic specifications. The theoretical predictions are validated by means of experimental results measured in a laboratory microgrid. A practical performance comparison of current limiting techniques based on experimental tests is also reported., This publication is part of the project PID2021-122835OB-C21, financed by MCIN/AEI/10.13039/501000011033 and FEDER “Una manera de hacer Europa”., Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Contribución de congreso (ConferenceOutput)

Agrixel. AI-based service standard for agricultural data in agri-food use cases

  • Eeckhout Alsinet, Joan van
  • Dimic, Miona
  • Angulo Bahón, Cecilio
We introduce a new interoperable geographic standard called agrixel, which employs a unique and innovative data processing methodology—similar to pixels in computer vision or tokens in language processing—leveraging computational power and machine learning in shared data spaces. Focused on AI-driven services for the agri-food sector and founded in a defined ontology, it offers a service portfolio for the sector itself, its externalities, and the circularity of its products. The agrixel standard ensures findable, accessible, interoperable, and reusable (FAIR) data, compatible with existing solutions. It supports multiple data layers, enabling extensions to externalities, such as carbon footprint, energy use, water management, logistics, and transport—enhancing efficiency in agri-food production and consumption., Joan van Eeckhout and Miona Dimic acknowledge the support of the Spanish Ministry for Digital Transformation and Public Service through the Secretariat of State for Digitalisation and Artificial Intelligence (project Agrixel ES, TSI-100121-2024-019) as part of the “Plan to Promote Sectoral Data Spaces” under the Recovery, Transformation and Resilience Plan, financed by the European Union – NextGenerationEU. Prof. Cecilio Angulo is also acknowledging co-funds from the European Union – NextGenerationEU, through the I+D+i PID2021-122835OBC21 research project ARTIFACTS (MCIN/AEI/10.13039/501000011033) and FEDER “Una manera de hacer Europa”., Peer Reviewed, 2 - Fam zero, 12 - Producció i Consum Responsables, 13 - Acció per al Clima, Postprint (published version)
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Negative-sequence virtual circuit breaker in islanded inverter-based microgrids

  • Ghodrati, Mojtaba
  • Borrell Sanz, Ángel
  • Castilla Fernández, Miguel
  • Miret Tomàs, Jaume
  • Velasco García, Manel
Unbalanced loads in islanded inverter-based microgrids induce voltage and current imbalances, posing significant challenges to the operation of critical equipment and sensitive loads. To address this issue, conventional circuit breakers, strategically placed between microgrids, play a key role in fault isolation during unbalanced conditions. However, they exhibit weaknesses in effectively addressing power quality issues, frequency variations, and power supply interruptions to specific loads. To solve these limitations, this paper introduces the new concept of negative-sequence virtual circuit breaker. Microgrid inverters are responsible for implementing this concept, which consists of eliminating negative-sequence voltages and currents at the point of-common-coupling between microgrids without altering positive-sequence voltages and currents. This last issue allows the entire electrical system to operate on a single frequency, guaranteeing the loads' supply. The compensators responsible for implementing the proposed concept are unilateral bandpass filters with complex coefficients. The primary advantage of these compensators over conventional integral compensators is their ability to offer plug-and-play operation. The effectiveness of the proposed concept has been verified through experimental tests in a laboratory setup., This work was supported by the I+D+i PID2021-122835OB-C21 research project, financed by MCIN/AEI/ 10.13039/501000011033 and FEDER “Una manera de hacer Europa., Peer Reviewed, Postprint (published version)