Pasar al contenido principal

PRODUCCION OPTIMIZADA DE HIDROGENO VERDE MEDIANTE ELECTROLIZADORES CERAMICOS BASADOS EN MATERIALES Y PROCESOS SOSTENIBLES

PID2021-123308OB-I00

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario AGENCIA ESTATAL CONSEJO SUPERIOR DE INVESTIGACIONES CIENTIFICAS (CSIC)

Resultados relacionados

Resultados totales (Incluyendo duplicados): 12
Encontrada(s) 1 página(s)

DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancement of electrochemical performance of SrFe0.5Co0.5O3-δ as air electrode for intermediate temperature solid oxide cells via Sb and Mo doping

  • Zapata-Ramírez, Víctor
  • Mather, Glenn C.
  • Pérez-Coll, Domingo
[EN] Optimisation of the composition or rare-earth-free perovskites is of considerable interest for their application as air electrodes in intermediate temperature solid oxide cells (IT-SOCs). Herein, we report the effects of Mo and Sb doping (5 mol %) of SrFe0.5Co0.5O3-δ (SFC) on oxygen content, thermal behaviour, electrochemical properties and stability. Phase-pure, XRD-cubic perovskite is achieved on sintering powder derived from Pechini synthesis in the range 1000-1100 °C for SFC, SrFe0.475Co0.475Mo0.05O3-δ (SFCM) and SrFe0.475Co0.475Sb0.05O3-δ (SFCSb). Oxygen content determined by redox titration is greater for the Mo- and Sb-doped phases than for SFC, although oxygen loss occurring at > 350 °C is greatest for SFCSb. The higher total oxygen content of the Mo-doped phase is expected to increase the electron-hole content resulting in higher conductivity (σ = 340.5 S cm−1 at 300 °C in O2). In contrast, the greater oxygen-vacancy content with increasing temperature of the Sb-doped material is associated with the most competitive electrode-polarisation resistance (<0.1 Ω cm2 at 700 °C). The greater relative effect of cathodic and anodic polarisation on improving electrochemical performance at lower temperatures highlights the potential of the studied compositions as air electrodes in IT-SOCs., The authors acknowledge the project PID2021-123308OB-I00, funded by MCIN/AEI/10.13039/501100011033 in Spain and “ERDF A way of making Europe”, by the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Influence of particle contact on flash sintering of ZnO and 8YSZ: Microstructure and electrical conductivity

  • Ribeiro Monteiro, Fábulo
  • Storion, Ana Gabriela
  • Ramos, Kethlinn
  • Menezes Jesus, Lilian
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
  • Luiz Chinelatto, Adilson
  • Agnolon Pallone, Eliria Maria de Jesus
[EN] The flash phenomenon in flash sintering of ceramic materials is closely related to electrical conductivity of the material. However, our understanding of how particle-to-particle contact of ceramic powders affects this phenomenon and, consequently, the microstructure and electrical properties of flash-sintered materials remains limited. To address this, we utilized “pseudo-in-situ” impedance spectroscopy to investigate the effect of particle-to-particle contact in nanometric powders of ZnO and 8YSZ, both before and after flash sintering. The powders were prepared using two different procedures, either grinding with a binder or employing multiple milling and calcining steps. After compacting into pellets, the samples were characterized before and after flash sintering, either with current-to-voltage control or with the application of current density ramps until the flash event occurred. Pseudo-in-situ impedance was employed to demonstrate that preparing powders using multiple milling and calcining steps improved charge-carrier mobility paths, facilitated homogeneous passage of electric current, reduced thermal gradients, and consequently resulted in better microstructural homogeneity and electrical conductivity. In addition, the use of the electric-current ramp control retained microstructural homogeneity to a greater degree., This work was supported by the Coordenação de Aperfeiçoamento de Pessoal de Nível Superior – Brasil (CAPES) – Finance Code 001, the São Paulo Research Foundation (FAPESP) [2015/07319-8 and 2019/14677-9], and the National Council for Scientific and Technological Development (CNPq) [403978/2021-1]. D. Pérez-Coll and G.C. Mather are grateful to the project PID2021-123308OB-I00, funded by MCIN/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, by the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

The effect of ammonolysis conditions on the structural properties and oxidation kinetics of cubic niobium oxynitride

  • Graça, Vanessa C. D.
  • Holz, Laura I. V.
  • Loureiro, Francisco J. A.
  • Mather, Glenn C.
  • Fagg, Duncan P.
[EN] In recent years, transition metal oxynitrides have gained increasing attention due to offering attractive properties, such as high electronic and thermal conductivity, high melting points and hardness, as well as high catalytic activity. Niobium oxynitrides, especially, have been suggested for a diverse range of applications, including potential electrocatalysts (e.g., water splitting, nitrogen reduction, etc.), antibacterial agents, superconducting materials, and coatings, among others. One of the most promising ways to synthesize these materials is by ammonolysis. However, by this route the final composition can be heavily dependent on the ammonolysis conditions, with this factor currently understudied in the available literature. Thus, in this work, we carefully explore the impact of ammonolysis conditions on the crystalline phase formation of niobium oxynitride compounds. Several techniques were used to fully characterize the materials, including XRD, SEM-EDS, TGA/DSC, XPS, and chemical analysis. Depending on the ammonolysis temperature and time, different composition-dependent changes in crystallographic structure can be induced across δ-NbNxOy (cubic) → Nb4(N,O)5 (tetragonal) → ε-NbN (hexagonal) phases. Potential defect-chemistry models were proposed to support measured compositional variations. A detailed kinetic analysis was then performed on the cubic materials to understand how composition can influence the thermal oxidation behaviour within this structure-type. An Fn-type reaction was used to fit the experimental and calculated data. The selection of the Avrami model, which describes the crystallization kinetics, was supported by the identification of amorphous-crystalline phase transformations during thermal oxidation. This work demonstrates that samples with higher N-content are more resistive to oxidation and shows that the anion composition, cation/anion ratio, and the crystallographic structure can be tailored by careful control of ammonolysis conditions., Vanessa C. D. Graça and Laura I. V. Holz are grateful to the Fundação para a Ciência e Tecnologia (FCT), for their PhD grants, respectively, SFRH/BD/130218/2017 and PD/BDE/142837/2018. Francisco J. A. Loureiro is thankful for the Investigator Grant CEECIND/02797/2020. The authors also acknowledge the projects PTDC/CTM-CTM/2156/2020, PTDC/QUI-ELT/3681/2020, POCI-01-0247-FEDER-039926, 2022.02498.PTDC, 2022.09319.PTDC, UIDB/00481/2020 and UIDP/00481/2020 from FCT, and CENTRO-01-0145-FEDER-181241 and CENTRO-01-0145-FEDER-022083 from Centro Portugal Regional Operational Programme (Centro2020), under the PORTUGAL 2020 Partnership Agreement, through the European Regional Development Fund (ERDF). Glenn C. Mather thanks the MICINN (Spain) for the concession of project PID2021-123308OB-I00., Electronic supplementary information (ESI) available. See DOI: https://doi.org/10.1039/d3tc01068f, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Preparation and optimization of La0.6Sr0.4Fe1-yCoyO3-δ cathodes for intermediate temperature solid oxide fuel cells

  • Tartaj, Jesús
  • Vázquez-Navalmoral, Álvaro
It is shown in this work that a synthetic route based on the auto-combustion of an ethylene glycol-metal nitrate polymerized gel precursor can be efficiently used to easily produce a range of La0.6Sr0.4Fe1-yCoyO3-δ nanopowders at moderate temperatures. We have been able to determine on air-sintered samples the effect of sintering temperature on the microstructure. At sintering temperatures as low as 1100 to 1200 °C, grains are well defined with a uniform round spherical morphology and have a homogeneous sub-micrometer size distribution showing a highly densified microstructure. The electronic conductivity and thermal expansion coefficients (TEC) of sintered LSFC samples have been determined according to the variation of Fe/Co composition. Both measures clearly increase with the Co content. These materials also must exhibit chemical stability with electrolytes, most commonly used for intermediate temperature solid oxide fuel cells (IT-SOFCs). In this way, the material obtained is optimized in terms of chemical homogeneity and good stoichiometric control, microstructural characteristics of sintered samples, and finally, the adequate cobalt content to avoid high TEC mismatch with other components of the SOFC. This is a crucial issue as it causes an important thermomechanical stress, promotes extensive microcraking and causes significant performance degradation. Finally, these cathodes must exhibit acceptable electrochemical parameters for use in IT-SOFC., The authors acknowledge the financial support by PID2021-123308OB-I00 project, funded by MCIN/AEI/10.13039/501100011033 in Spain and “ERDF A way of making Europe”, by the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimisation of electrochemical performance of Sr(Fe,Sb)O3-δ air electrodes for intermediate-temperature solid oxide cells through spray-pyrolysis processing

  • Zapata-Ramírez, Víctor
  • Mather, Glenn C.
  • Pérez-Coll, Domingo
The effects of replacing iron with cobalt and employing either Pechini or spray pyrolysis synthesis routes have been studied for the perovskite system SrFe0.9-xCoxSb0.1O3-δ (x = 0; 0.45; 0.9) to optimise sustainable air electrodes for intermediate-temperature solid oxide cells. The electrochemical performance of Pechini-prepared compositions improves with increasing cobalt content, attributable to higher electronic conductivity and oxygen-vacancy concentration, and lower processing temperature from 1300 ᵒC, for SrFe0.9Sb0.1O3-δ, to 1200 and 1100 ᵒC, for SrFe0.45Co0.45Sb0.1O3−δ and SrCo0.9Sb0.1O3−δ, respectively, with SrCo0.9Sb0.1O3-δ exhibiting an area specific resistance (ASR) of 0.084 Ω cm2 at 700 °C. The electrochemical stability of Fe-containing Pechini-based compositions is impaired, most likely due to a higher processing temperature. However, the very low processing temperature of 800 °C for spray-pyrolysed electrodes produces similar electrochemical performances for Co-containing and Co-free compositions (ASR≈ 0.065 Ω cm2 at 700 °C for SrFe0.9Sb0.1O3-δ) and high electrochemical stability with practically unaltered electrode polarisation resistance on thermal cycling. © 2024 The Authors, The authors acknowledge the project PID2021-123308OB-I00, funded by MCIN/AEI/10.13039/501100011033 in Spain and "ERDF A way of making Europe", by the European Union., Data will be made available on request, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Optimisation of the electrochemical performance of (Nd,Gd)1/3Sr2/3CoO3−δ cathode for solid oxide fuel cells via spray-pyrolysis deposition and decoration with Ag nanoparticles

  • Santos, P.R.
  • Pérez-Coll, Domingo
  • Azcondo, M.T.
  • Mather, Glenn C.
  • Muñoz-Noval, I.
  • Salas, Eduardo
  • Amador, U.
  • Boulahya, K.
  • Muñoz-Gil, D.
Single-step synthesis and deposition of composite solid oxide fuel cell cathodes of composition (Nd,Gd)1/3Sr2/3CoO3−δ : Ce0.9(Gd,Nd)0.1O1.95 (70 : 30 w : w) with and without the addition of Ag nanoparticles (Ag NPs) was achieved employing spray pyrolysis and low-temperature sintering at 900 °C. Spray-pyrolysis-prepared materials offered improved microstructure with smaller particle size and higher porosity (extended triple phase boundary) in comparison to slurry-coated electrodes of analogous composition. Impedance spectroscopy of symmetrical cells of the composite air electrodes indicated a lower resistive response of the spray-pyrolysis-prepared electrodes with lower overall polarisation resistance (Rp), attributable to improved oxygen surface exchange and oxide-ion diffusion processes. Further reduction in Rp was achieved on decoration of the composite air electrodes with Ag NPs; the decorated composites were characterised by high resolution transmission electron microscopy (HRTEM) and high-angle annular dark-field scanning transmission electron microscopy (HAADF-STEM). Ag K-edge X-ray Absorption Near Edge Structure (XANES) and Extended X-ray Absorption Fine Structure (EXAFS) of Ce0.9Gd0.1O2−δ:Ag spray-pyrolysed composites indicated that the Ag nanoparticles exhibit a core-shell structure with a Ag2O outer layer calculated to be two unit cells in thickness. The outer particle shell is suggested to participate in the enhanced electrochemical response, lowering the electrode polarisation response of symmetrical cells below 700 °C. Anode-supported single-cell fuel cells corresponding to the composite air electrode with Ag NPs and a thin YSZ-CGO electrolyte provided a maximum power density of 0.6 W cm−2 at 700 °C. © 2024 The Royal Society of Chemistry., We thank the project PID2019-106662RB-C41 funded by MCIN/AEI/10.13039/501100011033 and the project PID2021-123308OB-I00 funded by MCIN/AEI/10.13039/501100011033 and by "ERDF A way of making Europe". PRS, MTA and UA are grateful to the USP-CEU for other financial support. We also thank BM5 Spline line and CSIC for allocating beamtime and facilitating access to the ESRF for XAS experiments., Supplementary material, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Effects of ZnO additive on the electrical and densification properties of A-site deficient barium cerate perovskite

  • Triviño Peláez, Ángel
  • Pérez-Coll, Domingo
  • Mosa Ruiz, Jadra
  • Mather, Glenn C.
The dual strategies of A-site deficiency and addition of ZnO sintering aid have been employed to optimise stability and densify the high-temperature proton conductor Ba0.95Ce0.8Y0.2O3-δ at 1200 °C (B95CYZn-1200). Structural analysis performed by Rietveld refinement based on X-ray diffraction data indicated perovskite phase with monoclinic symmetry (space group, I2/m). Raman spectroscopy revealed the presence of ZnO for material sintered at 1200 °C, which most likely partially resides in grain-boundary regions, leading to enhanced electrical transport observed by impedance spectroscopy at low temperature. Anomalous and reproducible frequency-dependent impedance behaviour below 500 °C, observed in various atmospheres, is suggested to be attributable to the varistor-type properties of ZnO. The electrical conductivity of B95CYZn-1200 in the range 500–900 °C is typical of perovskite proton conductors but with greater conductivity than both Ba-stoichiometric BaCe0.8Y0.2O3-δ and ZnO-free Ba0.95Ce0.8Y0.2O3-δ in wet O2 and N2, reaching ∼ 1.1 S m−1 at 550 °C in wet O2. Resistance to carbonate formation and mechanical breakdown was demonstrated via prolonged impedance measurements in CO2- and H2-containing atmospheres in the range 600–700 °C. © 2024 The Authors, The authors acknowledge financial support from the project PID2021-123308OB-I00, funded by MCIN/AEI (Spain) /10.13039/501100011033 and "ERDF A way of making Europe" by the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Enhancing microstructure homogeneity and electrical conductivity in flash-sintered 8YSZ: Impact of electric-current ramp control and thermal insulation

  • Ribeiro Monteiro, Fábulo
  • Oliveira, P.H.F.
  • Lançoni, P.A.
  • de Araújo, H.E.
  • Pérez-Coll, Domingo
  • Mather, Glenn C.
  • Chinelatto, A.L.
  • Pallone, E.M.D.J.A.
Our study aimed to comprehend how variations in flash sintering parameters affect the evolution of microstructure and electrical properties of yttria-stabilised zirconia. For this purpose, cylindrical samples were sintered via a classic flash method (voltage-current control), with controlled increase in the current ramp, employing thermal insulation, and combining current ramp control with thermal insulation. The results demonstrated that the combination of current ramp control and thermal insulation yielded higher densification compared to other variations. Microstructural analysis revealed finer grain sizes and lower grain-boundary tensions on employing current ramp control, particularly when combined with thermal insulation. For all flash-sintering methods, greater electrical conductivity of grain boundaries was observed compared to conventional sintering, suggesting an enhancement in ionic conduction. This study underscores the potential of customised FS techniques in optimising sintering processes and enhancing material properties. © 2024 Elsevier Ltd, This work was supported by the Coordenacao de Aperfeicoamento de Pessoal de Nivel Superior - Brasil (CAPES) - Finance Code 001, the Sao Paulo Research Foundation (FAPESP) [2015/07319-8 and 2019/14677-9] . We also acknowledge financial support from the project PID2021-123308OB-I00, funded by MCIN/AEI/10.13039/501100011033 and "ERDF A way of making Europe" by the European Union., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Aqueous tape casting of titanium-doped lithium metazirconate (Ti-Li2ZrO3) sheets for solid-state electrolyte applications

  • Orsetti, Nicolás G.
  • Pérez-Coll, Domingo
  • Lorenzo, Gabriel
  • Moreno, Rodrigo
  • Suárez, Gustavo
Ti-doped lithium zirconate (LZTO) sheets were successfully made by aqueous tape casting, by starting from an innovative colloidal synthesis route and optimizing the colloidal processing parameters. Zeta potential and particles size measurements, together with rheological characterization, were performed to adjust the slip composition. Then, the suspension with 1.0 wt% of ammonium polyacrylate dispersant (APA) and solid loading of 31 vol.% resulted in flat and flexible sheets, thinner than 450 µm, by adding 20 wt% of acrylic binder emulsion. After annealing at 1150 °C/15 h, LZTO sheets densified up to 85.5 %, presented a microstructure with grains of 6.4 µm in diameter, and exhibited electrical conductivity values in the order of 10−7, 10−6 and 10−5 S·cm−1 at 350, 450 and 600 °C, respectively. Besides, XRD phase analysis revealed monoclinic Li<inf>2</inf>ZrO<inf>3</inf> and minor ZrO<inf>2</inf> impurities originated from Li<inf>2</inf>O volatilization during sintering, but no sign of TiO<inf>2</inf> segregation, indicating the formation of Li<inf>2</inf>Zr<inf>1-X</inf>Ti<inf>X</inf>O<inf>3</inf> solid solution. © 2025 Elsevier B.V., All rights reserved., This work was supported by JECS Trust mobility funding (Project number 2023360) and Projects PID2021–124521OB-I00 and PID2021–123308OB-I00, funded by MCIN/AEI/10.13039/ 501100011033/ & “ERDF A way of making Europe”. Nicolás G. Orsetti also has a PhD scholarship granted by CONICET (National Scientific and Technical Research Council) from Argentina., Supplementary material Appendix. at DOI: 10.1016/j.oceram.2025.100737, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Multilayer perovskite air-electrode architectures for enhanced performance in intermediate-temperature solid oxide cells

  • Zapata-Ramírez, Víctor
  • Mather, Glenn C.
  • Pérez-Coll, Domingo
In this work, we show that perovskite-based air electrodes for intermediate-temperature solid oxide cells based on SrFeO3-δ and SrCoO3-δ in a multilayer architecture exhibit enhanced electrochemical performance and stability in comparison to single-phase or composite analogues. X-ray pure phases of SrFe0.9Mo0.1O3-δ, SrFe0.9Sb0.1O3-δ and SrCo0.95Mo0.05O3-δ were obtained by Pechini synthesis and deposited on Ce0.9Gd0.1O2-δ electrolyte membranes by slurry coating. Scanning electron microscopy revealed comparable thicknesses, good adherence to the electrolyte and homogeneous grain size of various configurations involving single-phase electrodes, two electrode layers of different composition and a composite SrFe0.9Mo0.1O3-δ−SrCo0.95Mo0.05O3-δ electrode. The configuration SrCo0.95Mo0.05O3-δ/SrFe0.9Mo0.1O3-δ/Ce0.9Gd0.1O2-δ shows a lower ASR of 0.15 Ω cm2 at 700 °C compared to the best-performing, single-phase electrode studied, SrCo0.95Mo0.05O3-δ (0.21 Ω cm2 at 700 °C). However, all other tested multi-phase configurations, including the composite, show polarisation-resistance values, with and without dc bias, similar to or slightly higher than that of the single-phase cobaltite. Thermal cycling indicates that SrFe0.9Mo0.1O3-δ in contact with the electrolyte notably benefits stability, most likely due to a better thermal and chemical match. The multilayer electrode SrCo0.95Mo0.05O3-δ/SrFe0.9Mo0.1O3-δ is promising for intermediate-temperature applications due to its superior electrochemical performance and stability in comparison to single-phase perovskite cobaltite., The authors acknowledge the project PID2021-123308OB-I00, funded by MICIU/AEI/10.13039/501100011033 and “ERDF A way of making Europe”, by the European Union. We acknowledge support of the publication fee by the CSIC (Spain) Open Access Publication Support Initiative through its Unit of Information Resources for Research (URICI)., Data will be made available on request., Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduced Thermal Expansion and Improved Electrochemical Performance in Pr-Substituted SrFeO3 as Symmetrical Electrode for Solid Oxide Fuel Cells

  • Sánchez-Caballero, Abraham
  • Zamudio-García, Javier
  • Santos-Gómez, Lucía dos
  • Silva, Iván da
  • Pérez-Coll, Domingo
  • Porras-Vázquez, José M.
  • Marrero-López, Davil
Advances in doping strategies have significantly improved the properties of SrFeO3-based electrodes. However, challenges such as high thermal expansion coefficients and limited redox stability remain critical issues that require further investigation. This study focuses on the optimization of (Sr1–xPrx)0.95FeO3–δ (0 < x ≤ 1) series, evaluating the effects of praseodymium content on thermal expansion, redox stability, and electrochemical performance for potential application as both air and fuel electrodes in symmetrical solid oxide fuel cells. Rietveld refinements of X-ray and neutron diffraction data reveal a phase transformation from tetragonal to cubic symmetry with Pr content (0.2 ≤ x ≤ 0.4), followed by a transition to orthorhombic symmetry (x ≥ 0.6). Thermogravimetric and dilatometric analyses demonstrate that higher Pr content effectively reduces both oxygen nonstoichiometry and the thermal expansion coefficients, which decrease from 31 × 10–6 K–1 for x = 0.2 to 8.4 × 10–6 K–1 for x = 1. Meanwhile the electrical conductivity remains relatively unaffected by the Pr-content up to x = 0.8, reaching values as high as 116 S cm–1 at 700 °C in air. Additionally, the electrode polarization resistances are relatively low across the series, e.g. 0.11 Ω cm2 in air and 0.09 Ω cm2 in H2 for x = 0.6 at 700 °C, while exhibiting excellent redox cycling stability. These findings indicate that (Sr1–xPrx)0.95FeO3–δ (x ≥ 0.6) materials are promising electrodes, offering tunable thermal expansion and electrochemical properties for reliable performance in both oxidizing and reducing environments., The authors acknowledge the projects PID2021-126009OBI00, TED2021-129836B-I00 and PID2021-123308OB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the European Union. JZG thanks to his Postdoctoral contract at DTU., The Supporting Information is available free of charge at DOI: 10.1021/acsami.4c21980. Tables with Lattice parameters from XRPD; structural parameters from NPD; XPS analysis; electrical conductivity; Thermal expansion and polarization resistance of Fe-based electrodes; Rietveld plots of XRPD patterns in air and H2; Lattice cell volume variation with Pr content; XPS spectra in H2 for Pr0.6; Impedance spectra and DRT curves in air and H2; Polarization resistance of Pr0.6 after cycling in air and H2; I–V and DRT curves at different fuel concentrations, Peer reviewed
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Bi-Functional Oxygen Electrocatalysts for Reversible Solid Oxide Cells: The Influence of A-Site Non-stoichiometry on the System (La or Ba)0.6-xSr0.4Co0.8Fe0.2O3−δ

  • Dey, S.
  • Saravanan, R.
  • Sethurajaperumal, A.
  • Bal, R.
  • Mather, Glenn C.
  • Ganesh, G.
  • Varrla, E.
  • Puranik, A.
  • Nowicki, K.
  • Mukhopadhyay, M.
  • Allu, A.R.
  • Mukhopadhyay, J.
Selective tailoring of stoichiometry in perovskite oxide generates excellent electrocatalytic activity toward redox reaction of oxygen [oxygen evolution reaction (OER) and oxygen reduction reaction (ORR)]. The redox reaction of oxygen is kinetically sluggish (spin relaxed reaction) and is the rate-limiting step for solid oxide cells (SOCs). We have reported that introducing non-stoichiometry at the A-site in A0.6-xSr0.4Co0.8Fe0.2O3−δ imparts a bifunctional electrocatalyst for OER and ORR with excellent performance in fuel cell (FC) and electrolyzer cell (EC) mode. Two compositions, Ba0.6Sr0.4Co0.8Fe0.2O3−δ (BSCF-6482) and La0.6Sr0.4Co0.8Fe0.2O3−δ (LSCF-6482), are designed by varying the non-stoichiometry from 0.6 to 0.52 for Ba and La, respectively. X-ray photoelectron spectroscopy (XP spectroscopy), iodometric estimation, and O2-temperature-programmed desorption (O2-TPD) reveal that Ba0.54Sr0.4Co0.8Fe0.2O3−δ (BS-54) promotes oxygen surface exchange (higher β-oxygen population) and La0.54Sr0.4Co0.8Fe0.2O3−δ (LS-54) accelerates α-oxygen desorption (charge-transfer reaction). A study of the distribution of relaxation time (DRT) using EIS (electrochemical impedance spectroscopy) on cell configuration LS-54 (or BS-54)/GDC-LS-54 (or BS-54)//GDC//Pt@800 °C reveals that LS-54 has minimum electrode polarization (comprising dual processes of charge transfer and oxygen surface exchange) at both +0.8 V (OER) and −0.8 V (ORR), which resonates at 103-104 Hz. It is corroborated that α-oxygen is associated with the charge-transfer process and controls the ORR, whereas the OER is assisted by oxygen surface exchange, primarily linked with β-oxygen. Inclusion of non-stoichiometry at the A-site promotes oxygen-vacancy formation and stabilizes a lower valence state for the B-site cations. The rate-controlling steps for the OER and ORR thereby alter in LS-54 and BS-54 compared to LSCF/BSCF-6482. Electrochemical measurements show superior reversible solid oxide cell (SOC) performance of LS-54 having a current density (CD) of 1.27 A cm-2 @1.5 V and 0.66 A cm-2@0.5 V for a cell with dimensions as large as 5 cm × 5 cm. A similar cell operated with a CD of 1.0 A cm2 under standalone mode of operation in FC. This work proposes a novel strategy to demonstrate A-site non-stoichiometric La0.54Sr0.4Co0.8Fe0.2O3−δ to be a superior bifunctional electrocatalyst for both OER and ORR for SOCs. © 2025 American Chemical Society., The authors acknowledge all Institutions & Universities involved herein. The funding for the presented research has been supported by the Council of Scientific and Industrial Research (CSIR), Govt. of India, under “CSIR Hydrogen Technology (H2T)-Mission Program” [CGCRI/BDPD/Project-OM-23 −24/32] and Centre for High Technology, Oil Industries Development Board MoP & NG [CGCRI/BDPD/Project-OM-22-23/04]. G.C.M. acknowledges the project PID2021-123308OB-I00, funded by MCIN/AEI/10.13039/501100011033 in Spain and “ERDF A way of making Europe” by the European Union., The Supporting Information is available free of charge at https://pubs.acs.org/doi/10.1021/acsaem.5c00803., Peer reviewed