Pasar al contenido principal

Resultados relacionados

Resultados totales (Incluyendo duplicados): 2
Encontrada(s) 1 página(s)

RIUMA. Repositorio Institucional de la Universidad de Málaga
Publicación Contribución de congreso (ConferenceOutput)

Sn(IV) Glyphosine Phosphonates as Precursor of Fast Proton Conductors based on SnP2O7

  • Cabeza-Díaz, Aurelio
  • Cañamero-Cebrián, Fernando
  • Ramírez-Losilla, Enrique
  • Marrero-López, David
  • Olivera-Pastor, Pascual
  • Pérez-Colodrero, Rosario Mercedes
Metal phosphonates (MPs) combine good chemical and thermal stability alongside tuneable properties, which provide appealing features for electrochemical applications [1-2]. They exhibit not only remarkable proton conductivity properties but also can be potential precursors of electrolytes. useable in intermediate-temperature fuel cells (ITFCs), operating at 100 - 250 ºC [3]. In this work, we present the synthesis and characterization of a novel family of amorphous tin(IV) glyphosine-based phosphonates, Sn1-xMx[(O3PCH2)2-N-CH2CH2COOH)]1-x[(O3PCH2)2-NH-CH2CH2COOH]x n(H₂O) (M = Mg2+, Al3+; x < 0.3). Upon pyrolysis at 750 °C in air, these compounds were converted to the corresponding tin(IV) pyrophosphates and their proton conductivity properties measured. In comparison with the as-synthesized materials, that exhibited proton conductivities up to ~7·10⁻⁴ S/cm (90 °C and 95% RH), the resulting SnP2O7 derivatives showed values up to 1.3·10⁻² S/cm at the same conditions, with Ea < 0.12 eV characteristic of a water-mediated Grotthuss proton transfer mechanism (Figure 1). On the basis of solid-state 31P MAS-NMR studies, the proton conduction of these materials was found to be consistent with the formation of a core of crystalline tin(IV) pyrophosphate surrounded by an amorphous acidic phosphate-containing layer. Current efforts are focused on evaluating the performance of these materials in the range of 100 – 250 ºC and variable water vapor pressure. References [1] J. Jia, S. Bao, G.K.H. Shimizu, L. Zheng, Coord. Chem. Rev. 534 (2025) 216558. [2] Á. Vílchez-Cózar, R.M.P. Colodrero, M. Bazaga-García, D. Marrero-López, S.M. El-Refaei, P.A. Russo, N. Pinna, P. Olivera-Pastor, A. Cabeza, Appl. Catal. B 337 (2023), 122963 [3] Z. Wang, J. Zhang, S. Lu, Y. Xiang, Z. Shao, S.P. Jiang, Adv. Sustainable Syst. 7 (2023) 2200432.
DIGITAL.CSIC. Repositorio Institucional del CSIC
Publicación Artículo científico (JournalArticle)

Reduced Thermal Expansion and Improved Electrochemical Performance in Pr-Substituted SrFeO3 as Symmetrical Electrode for Solid Oxide Fuel Cells

  • Sánchez-Caballero, Abraham
  • Zamudio-García, Javier
  • Santos-Gómez, Lucía dos
  • Silva, Iván da
  • Pérez-Coll, Domingo
  • Porras-Vázquez, José M.
  • Marrero-López, Davil
Advances in doping strategies have significantly improved the properties of SrFeO3-based electrodes. However, challenges such as high thermal expansion coefficients and limited redox stability remain critical issues that require further investigation. This study focuses on the optimization of (Sr1–xPrx)0.95FeO3–δ (0 < x ≤ 1) series, evaluating the effects of praseodymium content on thermal expansion, redox stability, and electrochemical performance for potential application as both air and fuel electrodes in symmetrical solid oxide fuel cells. Rietveld refinements of X-ray and neutron diffraction data reveal a phase transformation from tetragonal to cubic symmetry with Pr content (0.2 ≤ x ≤ 0.4), followed by a transition to orthorhombic symmetry (x ≥ 0.6). Thermogravimetric and dilatometric analyses demonstrate that higher Pr content effectively reduces both oxygen nonstoichiometry and the thermal expansion coefficients, which decrease from 31 × 10–6 K–1 for x = 0.2 to 8.4 × 10–6 K–1 for x = 1. Meanwhile the electrical conductivity remains relatively unaffected by the Pr-content up to x = 0.8, reaching values as high as 116 S cm–1 at 700 °C in air. Additionally, the electrode polarization resistances are relatively low across the series, e.g. 0.11 Ω cm2 in air and 0.09 Ω cm2 in H2 for x = 0.6 at 700 °C, while exhibiting excellent redox cycling stability. These findings indicate that (Sr1–xPrx)0.95FeO3–δ (x ≥ 0.6) materials are promising electrodes, offering tunable thermal expansion and electrochemical properties for reliable performance in both oxidizing and reducing environments., The authors acknowledge the projects PID2021-126009OBI00, TED2021-129836B-I00 and PID2021-123308OB-I00, funded by MCIN/AEI/10.13039/501100011033 and by “ERDF A way of making Europe”, by the European Union. JZG thanks to his Postdoctoral contract at DTU., The Supporting Information is available free of charge at DOI: 10.1021/acsami.4c21980. Tables with Lattice parameters from XRPD; structural parameters from NPD; XPS analysis; electrical conductivity; Thermal expansion and polarization resistance of Fe-based electrodes; Rietveld plots of XRPD patterns in air and H2; Lattice cell volume variation with Pr content; XPS spectra in H2 for Pr0.6; Impedance spectra and DRT curves in air and H2; Polarization resistance of Pr0.6 after cycling in air and H2; I–V and DRT curves at different fuel concentrations, Peer reviewed