Pasar al contenido principal

ESTUDIO DINAMICO Y CONTROL DE CLUSTERS DE MICRORREDES

PID2021-123633OB-C32

•
Nombre agencia financiadora Agencia Estatal de Investigación
Acrónimo agencia financiadora AEI
Programa Programa Estatal para Impulsar la Investigación Científico-Técnica y su Transferencia
Subprograma Subprograma Estatal de Generación de Conocimiento
Convocatoria Proyectos de I+D+i (Generación de Conocimiento y Retos Investigación)
Año convocatoria 2021
Plan Estatal 2021-2023 Plan Estatal de Investigación Científica y Técnica y de Innovación
Centro beneficiario UNIVERSIDAD DE CADIZ

Resultados relacionados

Resultados totales (Incluyendo duplicados): 14
Encontrada(s) 1 página(s)

RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Optimization of Droop Control Coefficients in a Isolated Microgrid Cluster Using Particle Swarm Optimization

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Carrasco González, David
  • Sarrias Mena, Raúl
  • García Vázquez, Carlos Andrés
  • Fernández Ramírez, Luis Miguel
The isolated operation of microgrid clusters (MGC) must ensure proper voltage and frequency control continuously, in addition to maintaining the load and establishing an efficient distribution among the microgrids (MGs). The droop control technique is the most adopted method to perform the primary control of MGs. Therefore, the optimization of the droop control coefficients is one issue that need to be addressed to achieve the optimal MGC operation. This article presents a new objective cost function aimed at minimizing the system's total operating cost while ensuring effective voltage and frequency control within the established threshold values. The particle swarm optimization (PSO) metaheuristic optimization algorithm is used to solve the optimization problem and obtain the optimal values of the droop control coefficients that guarantee MGC stability and loss minimization. An isolated MGC is implemented in the Matlab/Simulink environment. Each MG consists of a gridsupporting inverter, an inductive-capacitive filter, a power transformer, and transmission lines connecting each MG. The results obtained in different scenarios ensure effective frequency and voltage control, as well as loss minimization by applying the optimal droop coefficients obtained through PSO., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OB-C32 supported by MCIN/AEI/10.13039/501100011033/FEDER, UE).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Development and experimental validation of a low-cost, real-time energy management system for microgrid clusters, based on electricity price and state of charge of hybrid energy storage systems

  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Horrillo Quintero, Pablo
  • Llorens Iborra, Francisco
  • Fernández Ramírez, Luis Miguel
Microgrid clusters (MGCs) are gaining popularity for enhancing energy efficiency, resilience, and reliability by integrating power generation, consumption, and storage elements, including DC/AC technologies. However, their expanding use requires the development of new validation techniques to ensure real-world operation. This article contributes to this effort by presenting, implementing and experimentally validating via a hardware-inthe-loop (HIL) setup, a novel control system for an MGC, deployed on a Raspberry Pi board, which is more economical compared to industrial controllers. The HIL setup comprises an OPAL-RT emulator and the Raspberry Pi board, enabling real-time testing under various operating regimes. This MGC comprises two MGs interconnected to a main grid: a DC MG incorporating DC loads, a wind turbine, fuel cell, an electrolyzer, and an ultracapacitor; and an AC MG comprising AC loads, battery bank, and a photovoltaic generator. The control system uses individual device controllers and a centralized energy management system (EMS) that dynamically controls MGC components, considering the electricity grid price and the state of charge (SOC) of the ESSs. The experimental results demonstrate a robust performance of the MGC and the control system while ensuring a safe SOC in the ESSs. Additionally, the control system demonstrates significant reductions in the electricity costs and in CO2 emissions compared to a fuzzy-logic EMS across a 24-hour test under realistic scenarios, and a short 20-second test. Therefore, the results demonstrate that the proposed solution provides a cost-effective, responsive, adaptable, scalable and practical solution for real-time energy coordination in MGCs., This work was partially supported by Ministerio de Ciencia e Innovacion, ´ Agencia Estatal de Investigacion, ´ FEDER, UE (Grant PID2021-123633OB-C32 supported by MCIN/AEI/10.13039/501100011033/FEDER, UE).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Hierarchical Control for Isolated Microgrid Clusters Under Renewable Variability

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Carrasco González, David
  • Sarrias Mena, Raúl
  • García Vázquez, Carlos Andrés
  • Fernández Ramírez, Luis Miguel
This paper presents a novel hierarchical control foramicrogridcluster (MGC) operating in islanded mode,integrating renewable energy technologies (RETs), energystorage systems (ESSs), and variable demands. The controlstrategy dynamically manages power distribution by introducingthe real-time available power concept, enabling proportionalallocation of power among microgrids (MGs) based on theiroperational capacity.The proposed configuration includes MGswith grid-forming (GFM) inverters for voltage and frequencycontrol andMGs with grid-following(GFL)inverter for powercontrol.Unlike conventional methods that oversimplify thedynamics of RETs and ESSs, this approach ensures adaptive andreliable power sharing while addressing the challenges ofintermittency and demand variability.Time-domain simulationsacross various operating scenarios validate the effectiveness ofthe proposed strategy, demonstrating its ability to maintain stablevoltage and frequency in isolated MGCs. The results confirm therobustness and adaptability of theproposedhierarchical controlframework, making it a viable solution for improving operationalreliability and resilience in high-RETspenetration systems. Thisinnovative approach advances the state of the art by providing adynamic solution to manage the complexities of islanded MGCoperations., This work was partially supported by Ministerio deCiencia e Innovación, Agencia Estatal de Investigación,FEDER, UE (Grant PID2021-123633OB-C32 supportedby MCIN/AEI/10.13039/501100011033/FEDER, UE).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Fault-tolerant control for a microgrid with PV systems and energy storage systems integrated into quasi-Z-source cascaded H-bridge multilevel inverter

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Sarrias Mena, Raúl
  • García Vázquez, Carlos Andrés
  • Fernández Ramírez, Luis Miguel
To ensure the reliability of microgrids (MGs), this paper presents a multi-fault tolerant control for a three-phase energy storage quasi-impedance multilevel-cascaded H-bridge inverter (ES-qZS-CHBMLI) with a photovoltaic (PV) power generation-based MG. In this paper, a battery energy storage system (BESS) is implemented to smooth out the PV generation fluctuations. In the event of a fault, most studies propose the injection of a fundamental zero sequence (FZS) to balance the system after a fault. However, the FZS based-method increases the modulation and it is limited by the converter operation range. The state-of-charge (SOC) unbalanced problem has traditionally been solved by balancing the BESSs as a single unit. This paper introduces an energy management system (EMS) based on the SOC proportional power distribution to balance the power injected into the grid. When one bridge faults, it is bypassed, and the remaining bridges in that phase change their operating conditions according to the references set by the EMS. Individual phase control allows multi-fault issues to be addressed. The simulation results of a three-phase grid-connected ES-qZS-CHBMLI PV-based MG implemented in MATLAB/Simulink validate the proposed multi-fault control and EMS. In addition, an experimental validation (based on OPAL RT4520 and dSPACE MicroLabBox units) confirm these results.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Optimal energy management system for grid-connected hybrid power plant and battery integrated into multilevel configuration

  • Hosseini, Ehsan
  • Horrillo Quintero, Pablo
  • Carrasco González, David
  • García Triviño, Pablo
  • Sarrias Mena, Raúl
  • García Vázquez, Carlos Andrés
  • Fernández Ramírez, Luis Miguel
A novel optimal energy management system (EMS) using a nonlinear constrained multivariable function to optimize the operation of battery energy storages (BESs) used in a hybrid power plant with wind turbine (WT) and photovoltaic (PV) power plants is proposed in this work. The hybrid power plant uses a configuration based on a battery-stored impedance-based cascaded multilevel inverter to integrate renewable energy sources (PV power plants and WT) and BESs into the grid. The new optimal EMS seeks for satisfying the demanded power while dispatching power between BESs to optimize their efficiency. A grid-connected configuration is implemented to assess the efficiency of the suggested supervisory control under changes in renewable energy (changes in wind speed and irradiation), and in a varying active and reactive powers’ request. The BES efficiency obtained from the suggested EMS is set side by side to the BES efficiency got from a conventional EMS and a model predictive control (MPC), both working based on the state-of-charge (SOC) of the BES and balancing power EMS. The results from MATLAB simulation and the experimental results with the real-time OPAL-RT simulator (OP4510, OPAL-RT) and dSPACE MicroLabBox show the effectiveness of the suggested approach and the improvement in long-term BES efficiency.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Power Sharing Control for a Microgrid with PV Power Plants, Batteries and Quasi-Z- source Cascaded H-birdge Multilevel Inverter

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Sarrias Mena, Raúl
  • García Vázquez, Carlos Andrés
  • Fernández Ramírez, Luis Miguel
In recent years, Quasi-Z-source cascaded H-bridge multilevel inverters (qZS-CHBMLIs) have become an interesting solution for integrating renewable energy into the utility grid. The possibility of performing power conversion in a single stage, without an additional DC/DC converter, and a higher voltage gain, are their main advantages over traditional inverters. In addition, individual control of the maximum power point tracking (MPPT) can be achieved for each PV plant. Owing to the intermittent nature of PV power plants, battery energy storage systems (BESS) are commonly used to smooth out PV power fluctuations. This paper presents a control system for the active and reactive power delivered to the grid according to the system operator references and an EMS for an ES-qZS-CHBMLI. The BESS is coordinated through an energy management system (EMS) based on the state of charge (SOC) The system is evaluated under two different operation modes. One of them, where the PV power plants operate according to their MPP and the other in which the MPPT faults and thus, the PV power is decreased. A MATLAB-Simulink simulation is used to validate the proposed control system for a grid-connected single-phase configuration based on a qZSCHBMLI with three cascade qZSI, each connected to a 4.8 kW PV power plant and a BESS
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Positive-Mode-Damping Stability Criterion Application and Damping Solutions in Microgrid-Integrated Transmission Grids

  • Cartiel Arasa, Oriol
  • Horrillo Quintero, Pablo
  • Mesas García, Juan José
  • García Triviño, Pablo
  • Sarrias Mena, Raúl
  • Fernández Ramírez, Luis Miguel
  • Sainz Sapera, Luis
Stability problems are increasing in current power systems with a large number of electronic converters, such as microgrids (MGs) and microgrid clusters (MGCs). Frequencydomain methods, commonly used to analyse traditional power system stability, can also be extended to MGs. In particular, the positive-mode-damping (PMD) stability criterion is a simple and practical method to evaluate the stability of multi-terminal power electronicsbased systems, making it a powerful tool for addressing stability issues in MGCs. This paper extends the application of the PMD stability criterion to assess stability in MGCintegrated transmission grids. Moreover, it presents two bandpass filter-based active and passive damping compensators and examines their effectiveness in mitigating instabilities in MGCs. A modified IEEE three-bus power system integrating an MGC is used to conduct a small-signal harmonic stability study and apply active and passive damping solutions with the PMD stability criterion. The modified IEEE three-bus power system is implemented in real-time simulations using a hardware-in-the-loop setup with OPAL-RT4512 to validate the results obtained from MATLAB/Simulink R2022a simulations.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Dynamic Energy Management System for Optimal Energy Dispatch in a Microgrid Cluster

  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Horrillo Quintero, Pablo
  • Llorens Iborra, Francisco
  • De la Cruz Loredo, Iván
  • Ugalde-Loo, Carlos Ernesto
  • Fernández Ramírez, Luis Miguel
Microgrid clusters (MGCs) have the ability to enhance energy efficiency, resilience, and reliability of individual microgrids (MGs). By integrating different power generation, consumption, and storage technologies, MGCs can combine direct current (DC) and alternating current (AC) technologies, thus offering flexibility to MGs. However, suitable control systems for MGCs are required to manage their operation, ensuring robustness and efficiency of the power dispatch. This work contributes to this effort by presenting and implementing a novel control approach for an MGC. The MGC consists of DC and AC MGs connected to a local electricity grid. The DC MG integrates a wind turbine, fuel cell, an electrolyzer, an ultracapacitor, and DC loads. In contrast, the AC MG integrates an electric battery bank, a photovoltaic generator and AC loads. The control system uses local controllers for each device in the cluster and a dynamic centralized energy management system to coordinate optimally energy dispatch and distribution among all energy storage systems. To assess the control approach, fluctuating incident solar radiation and winds speed, and dynamic loads conditions are introduced in the system. The control system demonstrates robust behavior across the different simulation scenarios., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OB-C32 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Coordinated Operation of Electricity, Hydrogen, and Thermal Systems in a Residential Multi-Energy Microgrid

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Hosseini, Ehsan
  • García Vázquez, Carlos Andrés
  • Sánchez Sainz, Higinio
  • Fernández Ramírez, Luis Miguel
Multi-energy microgrids (MEMGs) represent a specific typology of microgrids that combine multiple energy carriers—including electricity, heat, cooling, and hydrogen—within a coordinated framework. Existing studies emphasize energy dispatch optimization and often neglect real-time dynamic control. This paper presents a novel fuzzy-logic control method for the coordinated operation of electricity, hydrogen, and thermal systems in a residential MEMG. A photovoltaic (PV) power plant serves as the primary renewable energy source, while thermal sources include an electric boiler and a chiller. Additionally, a gas boiler is integrated to manage the hot water circuit. A hybrid energy storage system (HESS), comprising a battery and a hydrogen system, enhances operational flexibility. The fuzzy logic-based energy management system (FL-EMS) dynamically coordinates the interaction among energy systems based on renewable energy input and the state of energy (SOE) of the HESS. The proposed method is evaluated through simulations and hardware-in-the-loop (HIL) testing using OPAL-RT4512 and dSPACE MicroLabBox. The results show that the MEMG operates autonomously, with effective storage coordination and accurate thermal regulation. A sensitivity analysis confirms the robustness and adaptability of the FL-EMS, validating its suitability for real-time MEMG control. Compared to a machine-state-based EMS, the FL-EMS reduces the integral time-weighted squared error (ITSE) for temperature control by 49.38%, operating costs by 12.78%, and energy consumption by 15.05%.
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Microgrid Cluster Energy Management with a PLC

  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Horrillo Quintero, Pablo
  • Llorens Iborra, Francisco
  • De la Cruz Loredo, Iván
  • Ugalde-Loo, Carlos Ernesto
  • Fernández Ramírez, Luis Miguel
Microgrid clusters (MGCs) provide an opportunity for system operators to enhance efficiency, resilience, and reliability of energy systems. MGCs can combine direct current (DC) and alternating current (AC) technologies by integrating different power generation, consumption and storage technologies, thus offering flexibility and resilience to individual microgrids (MGs). However, verification of practical control systems for MGCs is required to ensure robustness and efficiency of the power dispatch. This work contributes to this effort by presenting, implementing and verifying a control system for an MGC. This MGC comprises separate DC and AC MGs interconnected to a local grid: the DC MG incorporates DC loads, a wind turbine, a fuel cell, an electrolyzer, and an ultracapacitor; and the AC MG comprises AC loads, an electrical battery bank, and a photovoltaic power plant. The control system uses a dynamic centralized energy management system (EMS) that coordinates power dispatch and energy distribution between all energy storage systems and local device controllers. The control system, specifically the EMS, is evaluated across different operating scenarios in an experimental validation environment composed of an OPAL-RT unit and a SIMATIC ET 200SP Open Controller PLC. The results show that the implemented EMS exhibits robust real-time behavior across different operating scenarios., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OBC32 supported by MCIN/AEI/10.13039/501100011033/FEDER, UE).
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Artículo científico (JournalArticle)

Model predictive control of a microgrid with energy-stored quasi-Z-source cascaded H-bridge multilevel inverter and PV systems

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Sarrias Mena, Raúl
  • García Vázquez, Carlos Andrés
  • Fernández Ramírez, Luis Miguel
This paper presents a new energy management system (EMS) based on model predictive control (MPC) for a microgrid with solar photovoltaic (PV) power plants and a quasi-Z-source cascaded H-bridge multilevel inverter that integrates an energy storage system (ES-qZS-CHBMLI). The system comprises three modules, each with a PV power plant, quasi-impedance network, battery energy storage system (BESS), and voltage source inverter (VSI). Traditional EMS methods focus on distributing the power among the BESSs to balance their state of charge (SOC), operating in charging or discharging mode. The proposed MPC-EMS carries out a multi-objective control for an ES-qZS-CHBMLI topology, which allows an optimized BESS power distribution while meeting the system operator requirements. It prioritizes the charge of the BESS with the lowest SOC and the discharge of the BESS with the highest SOC. Thus, both modes can coexist simultaneously, while ensuring decoupled power control. The MPC-EMS proposed herein is compared with a proportional sharing algorithm based on SOC (SOC-EMS) that pursues the same objectives. The simulation results show an improvement in the control of the power delivered to the grid. The Integral Time Absolute Error, ITAE, achieved with the MPC-EMS for the active and reactive power is 20 % and 4 %, respectively, lower than that obtained with the SOC-EMS. A 1,3 % higher charge for the BESS with the lowest SOC is also registered. Furthermore, an experimental setup based on an OPAL RT-4510 unit and a dSPACE MicroLabBox prototyping unit is implemented to validate the simulation results
RODIN. Repositorio de Objetos de Docencia e Investigación de la Universidad de Cádiz
Publicación Contribución de congreso (ConferenceOutput)

Optimal Hierarchical Energy Management System for a Three-Bus Microgrid Cluster Configuration

  • Carrasco González, David
  • Hosseini, Ehsan
  • Sarrias Mena, Raúl
  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Fernández Ramírez, Luis Miguel
The considerable research interest in microgrid clusters (MGCs) is owing to their ability to integrate diverse alternating current (AC) and direct current (DC) technologies for consumption, generation and storage, along with their inherent benefits in enhancing the reliability, efficiency, and resilience of energy systems. In this sense, this work presents a novel dynamic control for a grid-connected MGC, which includes an IEEE three-bus system interconnected with one DC microgrid (MG) (composed of a wind turbine, an ultracapacitor, electrical loads, a fuel cell, and an electrolyzer) and two AC MGs (composed each one of photovoltaic generators, electrical loads, and an electrical battery). The novel dynamic control consists of local controllers for each technology of the MGC and a dynamic hierarchical energy management system that coordinates an optimal power dispatch with the objective of optimizing the power losses in the transmission lines within the MGC. To evaluate the dynamic control, the system is studied under variations in the solar radiation, wind speed, and dynamic electrical loads. The dynamic control and the system exhibit robust behavior across the different simulation scenarios implemented., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grant PID2021-123633OBC32 supported by MCIN/AEI/10.13039/501100011033/FEDER, UE).
UPCommons. Portal del coneixement obert de la UPC
Publicación Artículo científico (JournalArticle)

Adaptive multi-objective real-time hierarchical control for isolated microgrid clusters utilizing an enhanced particle swarm optimization strategy to optimize costs and emissions

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Tostado Véliz, Marcos
  • Jurado Melguizo, Francisco
  • Sainz Sapera, Luis|||0000-0002-5670-0669
  • Fernández Ramírez, Luis M.
This paper introduces an adaptive hierarchical control for an isolated microgrid cluster (IMGC) leveraging a real-time multi-objective particle swarm optimization (MOPSO) algorithm. It simultaneously considers CO2 emissions minimization as a tertiary control objective and total losses minimization as a primary control objective, integrating grid-supporting and grid-feeding inverters for MG interconnection. The effectiveness of the MOPSO-based hierarchical control is demonstrated across multiple scenarios. Compared to a hierarchical control based on proportional power distribution relative to the rated inverter capacities of the MGs, the proposed method shows a 27.21% reduction in total losses and a 7.66% reduction in CO2 emissions. When compared with an optimization based on the fmincon solver, the proposed approach achieves a 22.92% reduction in losses and a 3.5% decrease in emissions. Additionally, centralized secondary control improves MRE indices by 100.09%, ITAE by 28.5%, ITSE by 43.78%, IAE by 30.61%, and ITSE by 47.72%, compared to the primary control strategy based on proportional approach. The MOPSO approach demonstrates robustness and flexibility, maintaining stable frequency and voltage within set thresholds during MG failures and sudden demand changes. Finally, the practical feasibility of the proposed approach is verified in a hardware-in-the-loop experimental setup using an OPAL-RT4512 unit and a dSPACE MicroLabBox. The experimental results, utilizing a time step of 50 µs, are consistent with the simulation outcomes, ensuring voltage and frequency control as its rated references., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grants PID2021-123633OB-C31, PID2021-123633OB-C32 and PID2021- 123633OB-C33 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE)., Peer Reviewed
Recercat. Dipósit de la Recerca de Catalunya
Publicación Artículo científico (JournalArticle)

Adaptive multi-objective real-time hierarchical control for isolated microgrid clusters utilizing an enhanced particle swarm optimization strategy to optimize costs and emissions

  • Horrillo Quintero, Pablo
  • García Triviño, Pablo
  • Carrasco González, David
  • Sarrias Mena, Raúl
  • Tostado Véliz, Marcos
  • Jurado Melguizo, Francisco
  • Sainz Sapera, Luis
  • Fernández Ramírez, Luis M.
This paper introduces an adaptive hierarchical control for an isolated microgrid cluster (IMGC) leveraging a real-time multi-objective particle swarm optimization (MOPSO) algorithm. It simultaneously considers CO2 emissions minimization as a tertiary control objective and total losses minimization as a primary control objective, integrating grid-supporting and grid-feeding inverters for MG interconnection. The effectiveness of the MOPSO-based hierarchical control is demonstrated across multiple scenarios. Compared to a hierarchical control based on proportional power distribution relative to the rated inverter capacities of the MGs, the proposed method shows a 27.21% reduction in total losses and a 7.66% reduction in CO2 emissions. When compared with an optimization based on the fmincon solver, the proposed approach achieves a 22.92% reduction in losses and a 3.5% decrease in emissions. Additionally, centralized secondary control improves MRE indices by 100.09%, ITAE by 28.5%, ITSE by 43.78%, IAE by 30.61%, and ITSE by 47.72%, compared to the primary control strategy based on proportional approach. The MOPSO approach demonstrates robustness and flexibility, maintaining stable frequency and voltage within set thresholds during MG failures and sudden demand changes. Finally, the practical feasibility of the proposed approach is verified in a hardware-in-the-loop experimental setup using an OPAL-RT4512 unit and a dSPACE MicroLabBox. The experimental results, utilizing a time step of 50 µs, are consistent with the simulation outcomes, ensuring voltage and frequency control as its rated references., This work was partially supported by Ministerio de Ciencia e Innovación, Agencia Estatal de Investigación, FEDER, UE (Grants PID2021-123633OB-C31, PID2021-123633OB-C32 and PID2021- 123633OB-C33 supported by MCIN/AEI/10.13039/501100011033/ FEDER, UE)., Peer Reviewed, Postprint (published version)